// reasampler_processor.cpp — see reasampler_processor.h.

#include "reasampler_processor.h"

#include <algorithm>
#include <cstdint>
#include <fstream>
#include <optional>
#include <utility>
#include <vector>

#include "pluginterfaces/base/ibstream.h"
#include "pluginterfaces/vst/ivstaudioprocessor.h"
#include "pluginterfaces/vst/ivstevents.h"
#include "pluginterfaces/vst/ivstmidicontrollers.h"  // kCtrlAllNotesOff / kCtrlAllSoundsOff (panic)
#include "pluginterfaces/vst/vstspeaker.h"

#include "assignment_request.h"  // decodeAssignmentRequest (S8 request wire parse)
#include "bank_sync.h"       // S9/S8 pure decisions: parseBankGeneration, consumeDecision
#include "capture_paths.h"   // resolveBankFile (shared M4 path resolution)
#include "ext_keys.h"        // kProjExtBanksKey / kProjExtBankGenKey / kProjExtAssignKey (shared wire contract)
#include "master_gain.h"     // masterGainMaxLinear (FB1 post-mixer gain clamp)
#include "reasampler_editor.h"
#include "reasampler_embed.h"  // S6 embed shell + IReaperUIEmbedInterface (its iid DEF'd there)
#include "sample_map.h"       // selectSample, resolvePerformance, buildZonedKeymap, state (de)ser
#include "wav_trim.h"         // parseWavLayout, extractFloatFrames (shared WAV parse)

using namespace Steinberg;
using namespace Steinberg::Vst;

namespace reasampler::vst {

namespace {

// S16 Preserve-mode voice cap: a Preserve voice runs a per-voice OLA pitch shifter and is
// materially heavier than a Varispeed voice. A Preserve note-on past the cap is dropped rather
// than glitching (Varispeed notes are unaffected). Set from the measured/estimated per-voice
// cost — see the handoff CPU note. 8 is conservative pending DAW profiling. Phase S: the
// polyphony bound itself is now the USER-SET voiceCount (1..32, persisted) — this cap stays
// FIXED so raising the voice count never multiplies shifter CPU past the profiled budget.
constexpr std::size_t kPreserveVoiceCap = 8;

// FB1 post-mixer gain ramp rate (per sample). gainCurrent_ converges to masterGain_ at this
// linear step; it ramps from 0 to unity (or vice versa) in ~20 ms at 48 kHz. The early-out
// (|current - target| < threshold) snaps to the target and avoids the ramp loop on idle blocks.
// kGainRampSnap is the threshold below which we snap to the target (avoids long sub-LSB creep).
constexpr float kGainRampRate = 1.0f / 960.0f;   // 960 samples @ 48 kHz ≈ 20 ms
constexpr float kGainRampSnap = kGainRampRate * 0.5f;

// Read a whole file into a byte buffer. Off-thread only (blocking file I/O). Empty on
// any failure — the caller treats an unreadable WAV as "nothing to play".
std::vector<std::uint8_t> readFileBytes(const std::string& path) {
    std::vector<std::uint8_t> bytes;
    std::ifstream f(path, std::ios::binary | std::ios::ate);
    if (!f) return bytes;
    const std::streamoff size = f.tellg();
    if (size <= 0) return bytes;
    f.seekg(0, std::ios::beg);
    bytes.resize(static_cast<std::size_t>(size));
    if (!f.read(reinterpret_cast<char*>(bytes.data()), size)) bytes.clear();
    return bytes;
}

// Resolve a project-relative WAV path (the M4 way persist does), read + decode it (file
// I/O — off-thread only), and apply the S7 cross-mode channel policy for `mode`: mono mode
// downmixes to one channel (existing policy); stereo mode yields two channels (dual-mono for
// a mono source, L/R for a stereo source) — see decodeChannels. Returns nullopt when the path
// fails to resolve, the file is unreadable, the WAV is malformed, or the decode yields no
// frames — the caller drops the zone (zoned map) or plays silence (single capture). Shared by
// the zoned build and the single-capture path so both decode identically for the active mode.
std::optional<DecodedZonePcm> decodeRelative(const std::string& projectDir,
                                             const std::string& relativePath,
                                             ChannelMode mode) {
    const std::string abs = resolveBankFile(projectDir, relativePath);
    if (abs.empty()) return std::nullopt;
    const std::vector<std::uint8_t> bytes = readFileBytes(abs);
    const WavLayout layout = parseWavLayout(bytes);
    if (!layout.valid) return std::nullopt;
    std::vector<AudioSample> interleaved =
        extractFloatFrames(bytes, layout, 0, layout.frameCount());
    DecodedZonePcm out = decodeChannels(interleaved, layout.channelCount, mode,
                                        static_cast<int>(layout.sampleRate));
    if (out.monoFrames.empty()) return std::nullopt;
    return out;
}

}  // namespace

FUnknown* ReaSamplerProcessor::createInstance(void* /*context*/) {
    // The host owns the returned reference. Cast up to the combined interface the SDK
    // exposes (IAudioProcessor) so the FUnknown refcount is correctly rooted.
    return static_cast<IAudioProcessor*>(new ReaSamplerProcessor());
}

// Out-of-line so unique_ptr<ReaSamplerEmbed> sees the complete type here.
ReaSamplerProcessor::~ReaSamplerProcessor() = default;

tresult PLUGIN_API ReaSamplerProcessor::queryInterface(const TUID iid, void** obj) {
    // S6: expose REAPER's inline-embed interface. REAPER queries the IEditController for
    // IReaperUIEmbedInterface (reaper_vst3_interfaces.h); hand it our lazily-created embed
    // shell. We own the shell (unique_ptr); the borrowed reference is valid because the
    // processor outlives it. All other iids fall through to the SDK's queryInterface.
    if (FUnknownPrivate::iidEqual(iid, IReaperUIEmbedInterface::iid)) {
        if (!embed_) embed_ = std::make_unique<ReaSamplerEmbed>(this);
        embed_->addRef();
        *obj = static_cast<IReaperUIEmbedInterface*>(embed_.get());
        return kResultOk;
    }
    return SingleComponentEffect::queryInterface(iid, obj);
}

tresult PLUGIN_API ReaSamplerProcessor::initialize(FUnknown* context) {
    tresult result = SingleComponentEffect::initialize(context);
    if (result != kResultOk) return result;

    // Connect the REAPER bridge. Non-fatal if it fails (non-REAPER host): the
    // instrument still loads, it just has no live bank to play.
    bridge_.connect(context);

    // Instrument bus topology: one event input (MIDI in, 16 channels), one audio output, no
    // audio input. GA fix (hard-right pan): the output bus is a FIXED STEREO bus regardless of
    // the channel mode. The mode is a DECODE policy (downmix vs L/R split) — mono mode renders
    // dual-mono through the stereo bus (both channels equal, centered), which is audibly
    // identical to a mono bus but never asks the host to re-map a live instance's pins. The
    // prior design flipped the bus kMono<->kStereo via restartComponent(kIoChanged) on every
    // mode change/restore; in the DAW that flip panned a dual-mono capture hard RIGHT. The
    // in-plugin path is provably symmetric (decode, per-voice stereo render, engine sum, buffer
    // write — see testDualMonoStereoSampleRendersCentered), so the asymmetry sat in the host's
    // re-routing of the live instance's pins across the arrangement change. A fixed arrangement
    // is the maximally-standard VSTi shape and removes that whole negotiation surface.
    addEventInput(STR16("MIDI In"), 16);
    addAudioOutput(STR16("Audio Out"), SpeakerArr::kStereo);

    return kResultOk;
}

tresult PLUGIN_API ReaSamplerProcessor::terminate() {
    // process() is not running at terminate. Free the live + draining instruments and
    // drain the graveyard. Take the pointers out of the atomics first so nothing else
    // races them.
    std::lock_guard<std::mutex> lock(reloadMutex_);
    delete live_.exchange(nullptr);
    delete draining_.exchange(nullptr);
    graveyard_.clear();
    return SingleComponentEffect::terminate();
}

tresult PLUGIN_API ReaSamplerProcessor::setActive(TBool state) {
    // Activating: build the instrument from the currently-selected sample so the first
    // block after activation can play. Deactivating: process is now GUARANTEED stopped by
    // the host, so this is the safe point to reclaim the graveyard (the displaced engines
    // no reload could free while active). The build/drain are off the audio thread —
    // setActive is a main/UI-thread call.
    if (state) {
        reloadFromBank();
    } else {
        std::lock_guard<std::mutex> lock(reloadMutex_);
        // process is guaranteed stopped: free EVERYTHING. The live instrument too — its
        // voices are frozen mid-flight, and if it survived deactivation the reactivate
        // reload would displace it into the DRAIN slot, resurrecting stale sustained
        // voices as ghosts. Reactivation rebuilds from scratch (reloadFromBank above),
        // so nothing is lost by clearing here.
        delete live_.exchange(nullptr);
        delete draining_.exchange(nullptr);
        graveyard_.clear();
    }
    return kResultOk;
}

tresult PLUGIN_API ReaSamplerProcessor::setupProcessing(ProcessSetup& setup) {
    sampleRate_ = setup.sampleRate;
    maxBlockSize_ = setup.maxSamplesPerBlock;
    return SingleComponentEffect::setupProcessing(setup);
}

tresult PLUGIN_API ReaSamplerProcessor::setState(IBStream* state) {
    if (!state) return kResultFalse;
    // Read the whole component-state blob (the performance map, versioned). The blob is
    // small; read in one shot into a growable buffer.
    std::vector<std::uint8_t> bytes;
    std::uint8_t chunk[256];
    int32 got = 0;
    while (state->read(chunk, sizeof(chunk), &got) == kResultOk && got > 0) {
        bytes.insert(bytes.end(), chunk, chunk + got);
    }
    // Component state (v3, S10) is {single-capture selection id, opt-in zones}. The
    // selection and the zones are DISTINCT — the default face is one picked capture, zones
    // are a demoted overlay — so both are restored explicitly (no more inferring a selection
    // from a lone zone). deserializeComponentState lifts older blobs cleanly: a v2 zones-only
    // blob restores {"", zones}; a v1 S4 single-selection blob restores {id, one-zone map} so
    // the old pick survives as both; an empty/unknown blob restores {"", no zones} — the S10
    // silent empty state (no first-sample fallback in reloadFromBank).
    // Pass sampleRate_ as the project rate for legacy v3 blob conversion (frames -> seconds at
    // the v3 read boundary). sampleRate_ is set by setupProcessing; REAPER calls setupProcessing
    // before setState on project load, so sampleRate_ is the real host rate here. A v3 blob on a
    // pre-setup call would assert inside readZonesPayload (a programming error, not a field case).
    const ComponentState cs = deserializeComponentState(bytes, sampleRate_);
    setSelectedSampleId(cs.selectionId);
    // Zone-bleed fix (3a) heal-on-load: a blob saved under the pre-fix editor may carry a
    // pile of stale full-range zones (one per sample ever browsed), the oldest shadowing the
    // saved selection under first-match resolve. Reconciling here restores "the sample the
    // editor shows is the sample the engine plays" for already-affected projects; authored
    // Zone-view maps (any narrow key range) pass through untouched.
    PerformanceMap restored = cs.map;
    reconcileSingleCaptureZones(restored, cs.selectionId);  // bool return ignored: setPerformanceMap + reloadFromBank run unconditionally on load
    setPerformanceMap(restored);
    // S8: restore the last-consumed assignment generation so a re-open does not re-apply a
    // stale assign_request (the user may have manually changed the selection after the assign).
    {
        std::lock_guard<std::mutex> lock(assignMarkerMutex_);
        lastConsumedAssignGeneration_ = cs.lastConsumedAssignGeneration;
    }
    // Restore the S7 channel mode + the GA explicit flag. The output bus is FIXED stereo (see
    // initialize) — the mode only governs how the reload below decodes, so no bus work here.
    {
        std::lock_guard<std::mutex> lock(channelModeMutex_);
        channelMode_ = cs.channelMode;
        channelModeExplicit_ = cs.channelModeExplicit;
    }
    // S-VIEW-4: restore the per-instance preview velocity. Guarded by previewMutex_ — since Wave 2
    // the editor's velocity knob is a concurrent UI-thread writer.
    {
        std::lock_guard<std::mutex> lock(previewMutex_);
        previewVelocity_ = cs.previewVelocity;
    }
    // Phase S: restore the voice-system parameters (v7; older blobs lift to {16, Poly,
    // Retrigger} in deserializeComponentState — pre-Phase-S behavior). Restored BEFORE the
    // reload below so the rebuilt engine is born with the saved polyphony/mode.
    {
        std::lock_guard<std::mutex> lock(voiceParamsMutex_);
        voiceCount_ = cs.voiceCount;
        voiceMode_ = cs.voiceMode;
        monoTrigger_ = cs.monoTrigger;
    }
    // FB1: restore the post-mixer master gain (v8; older blobs lift to unity in
    // deserializeComponentState — pre-FB1 output). One atomic store; the audio thread picks
    // it up at the next block start.
    setMasterGainLinear(cs.masterGainLinear);
    // Rebuild from the restored state (off-thread — setState is a load-time call).
    reloadFromBank();
    return kResultOk;
}

tresult PLUGIN_API ReaSamplerProcessor::getState(IBStream* state) {
    if (!state) return kResultFalse;
    // Persist the full instance state (v3, S10): the single-capture selection id AND the
    // opt-in zones — the instrument's own state (D-B), NEVER written to the "reasampler"
    // bank ext-state. An instance with no pick and no zones serializes to {"", no zones}
    // and restores as the S10 empty state (silence + "pick a capture"), never auto-playing
    // sample #1.
    ComponentState state_out;
    state_out.selectionId = selectedSampleId();
    state_out.map = performanceMap();
    {
        // S7: persist the per-instance mono/stereo decode mode + the GA explicit flag (v9).
        std::lock_guard<std::mutex> lock(channelModeMutex_);
        state_out.channelMode = channelMode_;
        state_out.channelModeExplicit = channelModeExplicit_;
    }
    {
        std::lock_guard<std::mutex> lock(assignMarkerMutex_);
        state_out.lastConsumedAssignGeneration = lastConsumedAssignGeneration_;  // S8 reader marker
    }
    state_out.previewVelocity = previewVelocity();  // S-VIEW-4: persist the preview strike velocity
    {
        // Phase S: persist the voice-system parameters (component state v7).
        std::lock_guard<std::mutex> lock(voiceParamsMutex_);
        state_out.voiceCount = voiceCount_;
        state_out.voiceMode = voiceMode_;
        state_out.monoTrigger = monoTrigger_;
    }
    state_out.masterGainLinear = masterGainLinear();  // FB1: persist the post-mixer gain (v8)
    const std::vector<std::uint8_t> bytes = serializeComponentState(state_out);
    if (!bytes.empty()) {
        const tresult wr = state->write(const_cast<std::uint8_t*>(bytes.data()),
                                        static_cast<int32>(bytes.size()), nullptr);
        if (wr != kResultOk) return wr;
    }
    return kResultOk;
}

std::string ReaSamplerProcessor::selectedSampleId() {
    std::lock_guard<std::mutex> lock(selectionMutex_);
    return selectedSampleId_;
}

void ReaSamplerProcessor::setSelectedSampleId(const std::string& id) {
    std::lock_guard<std::mutex> lock(selectionMutex_);
    selectedSampleId_ = id;
}

PerformanceMap ReaSamplerProcessor::performanceMap() {
    std::lock_guard<std::mutex> lock(performanceMutex_);
    return performanceMap_;
}

void ReaSamplerProcessor::setPerformanceMap(const PerformanceMap& map) {
    std::lock_guard<std::mutex> lock(performanceMutex_);
    performanceMap_ = map;
}

ChannelMode ReaSamplerProcessor::channelMode() {
    std::lock_guard<std::mutex> lock(channelModeMutex_);
    return channelMode_;
}

std::uint8_t ReaSamplerProcessor::previewVelocity() {
    std::lock_guard<std::mutex> lock(previewMutex_);
    return previewVelocity_;
}

void ReaSamplerProcessor::setPreviewVelocity(std::uint8_t velocity) {
    // Clamp to the MIDI-note range [1,127] (0 would be a note-off by convention — a preview
    // strike must sound). The editor's knob maps its 0..1 domain into this range before calling.
    if (velocity < 1) velocity = 1;
    if (velocity > 127) velocity = 127;
    std::lock_guard<std::mutex> lock(previewMutex_);
    previewVelocity_ = velocity;
}

int ReaSamplerProcessor::voiceCount() {
    std::lock_guard<std::mutex> lock(voiceParamsMutex_);
    return voiceCount_;
}

void ReaSamplerProcessor::setVoiceCount(int count) {
    // Clamp to the shared pure-core range so the engine, the state bytes, and the editor's
    // control can never disagree about the legal polyphony span.
    if (count < kMinVoiceCount) count = kMinVoiceCount;
    if (count > kMaxVoiceCount) count = kMaxVoiceCount;
    {
        std::lock_guard<std::mutex> lock(voiceParamsMutex_);
        if (voiceCount_ == count) return;  // no-op: don't churn a rebuild
        voiceCount_ = count;
    }
    // LIGHT rebuild OFF-thread through the drain-slot swap: the engine is reconstructed from
    // the already-decoded keymap (no bridge re-read, no WAV re-decode — a polyphony change
    // touches no audio data) and the displaced instrument keeps rendering its ringing tails,
    // so a voice-param change never cuts a sounding note NOR stalls the UI re-decoding every
    // zone from disk. Same contract for the mode/trigger setters below.
    rebuildVoiceEngine();
}

VoiceMode ReaSamplerProcessor::voiceMode() {
    std::lock_guard<std::mutex> lock(voiceParamsMutex_);
    return voiceMode_;
}

void ReaSamplerProcessor::setVoiceMode(VoiceMode mode) {
    {
        std::lock_guard<std::mutex> lock(voiceParamsMutex_);
        if (voiceMode_ == mode) return;
        voiceMode_ = mode;
    }
    rebuildVoiceEngine();
}

MonoTrigger ReaSamplerProcessor::monoTrigger() {
    std::lock_guard<std::mutex> lock(voiceParamsMutex_);
    return monoTrigger_;
}

void ReaSamplerProcessor::setMonoTrigger(MonoTrigger trigger) {
    {
        std::lock_guard<std::mutex> lock(voiceParamsMutex_);
        if (monoTrigger_ == trigger) return;
        monoTrigger_ = trigger;
    }
    rebuildVoiceEngine();
}

void ReaSamplerProcessor::setMasterGainLinear(double linear) {
    // Clamp to the control's legal span (the master_gain taper: 0 = -inf/silence, cap =
    // +24 dB). One relaxed atomic store — the audio thread reads it at the next block start;
    // no rebuild, no lock (a post-sum output trim is not a keymap fact).
    if (!(linear >= 0.0)) linear = 0.0;  // also catches NaN
    const double maxLin = masterGainMaxLinear();
    if (linear > maxLin) linear = maxLin;
    masterGain_.store(static_cast<float>(linear), std::memory_order_relaxed);
}

void ReaSamplerProcessor::previewNoteOn(int note) {
    if (note < 0) note = 0;
    if (note > 127) note = 127;
    const std::uint8_t vel = previewVelocity();  // latch the current knob value into the request
    // Advance the sequence (wrapping; process compares for inequality, so a wrap is harmless as
    // long as we never land back on the exact value the audio thread last consumed in one step —
    // 16 bits gives 65535 posts between collisions, unreachable at UI-click rates).
    const std::uint16_t seq = ++previewOnSeq_ == 0 ? ++previewOnSeq_ : previewOnSeq_;
    const std::uint32_t packed = (static_cast<std::uint32_t>(seq) << 16) |
                                 (static_cast<std::uint32_t>(vel) << 8) |
                                 static_cast<std::uint32_t>(note & 0xFF);
    previewOnRequest_.store(packed, std::memory_order_release);
}

void ReaSamplerProcessor::previewNoteOff(int note) {
    if (note < 0) note = 0;
    if (note > 127) note = 127;
    const std::uint16_t seq = ++previewOffSeq_ == 0 ? ++previewOffSeq_ : previewOffSeq_;
    const std::uint32_t packed = (static_cast<std::uint32_t>(seq) << 16) |
                                 static_cast<std::uint32_t>(note & 0xFF);
    previewOffRequest_.store(packed, std::memory_order_release);
}

void ReaSamplerProcessor::setChannelMode(ChannelMode mode) {
    {
        std::lock_guard<std::mutex> lock(channelModeMutex_);
        // The editor toggle is a DELIBERATE choice either way: latch explicit even on a
        // same-mode click (the user confirmed the mode; the GA auto-default stops fighting it).
        channelModeExplicit_ = true;
        if (channelMode_ == mode) return;  // no decode change: don't churn a reload
        channelMode_ = mode;
    }
    // The DECODE policy changed. The output bus is FIXED stereo (GA fix — no bus repoint, no
    // restartComponent): reloading re-decodes the loaded WAV(s) under the new mode off-thread
    // (mono = downmix, stereo = L/R split) and the RT path just keeps rendering.
    reloadFromBank();
}

tresult PLUGIN_API ReaSamplerProcessor::setBusArrangements(
    SpeakerArrangement* inputs, int32 numIns,
    SpeakerArrangement* outputs, int32 numOuts) {
    // ONE canonical arrangement: the fixed stereo output bus (GA fix — the channel mode is a
    // decode policy, never a bus fact). We take NO audio input, so any inputs are rejected.
    // Accept (kResultTrue) only a single stereo output proposal; otherwise reject (kResultFalse)
    // and keep our stereo arrangement (per the VST3 contract, a plug-in that can't honor a
    // proposal keeps a valid arrangement of its own) — the host adapts its routing to us.
    if (numIns < 0 || numOuts < 0) return kInvalidArgument;
    if (numIns > 0) return kResultFalse;  // no audio input bus to arrange
    if (numOuts == 1 && outputs && outputs[0] == SpeakerArr::kStereo) return kResultTrue;
    return kResultFalse;
}

std::string ReaSamplerProcessor::reloadFromBank() {
    // OFF THE AUDIO THREAD. Serialize concurrent reloads (editor click + setState) so
    // the retired-slot free is single-writer. This mutex is NEVER taken on the audio
    // thread — process() only touches the atomic.
    std::lock_guard<std::mutex> lock(reloadMutex_);

    // Mint this reload's generation number first so we can stamp the built instrument
    // with it before publishing. Under reloadMutex_ no other reload races here.
    const std::uint64_t gen = reloadGeneration_.fetch_add(1, std::memory_order_relaxed) + 1;

    // 1. Read the live bank + resolve the project dir over the bridge (allocates,
    //    calls REAPER — fine here, off-thread).
    std::optional<std::string> banksJson =
        bridge_.readReasamplerExtState(kProjExtBanksKey);
    const std::string projectDir = bridge_.activeProjectDir();
    // The active channel mode (S7) governs how each WAV decodes (mono downmix vs 2-channel).
    // Read once under its mutex, off the audio thread, before the decode loop. The single-
    // capture branch below may auto-default it (GA) before its decode.
    ChannelMode mode = channelMode();
    // Phase S: snapshot the voice-system parameters once — they are baked into the built
    // engine's construction (the engine's config is immutable; a later change rebuilds).
    int builtVoiceCount = kDefaultVoiceCount;
    VoiceMode builtVoiceMode = VoiceMode::Poly;
    MonoTrigger builtMonoTrigger = MonoTrigger::Retrigger;
    {
        std::lock_guard<std::mutex> vp(voiceParamsMutex_);
        builtVoiceCount = voiceCount_;
        builtVoiceMode = voiceMode_;
        builtMonoTrigger = monoTrigger_;
    }

    std::string resolvedId;
    std::unique_ptr<LoadedInstrument> built;

    if (banksJson) {
        // 2. Tier 1 first: if the instrument's performance map is non-empty, resolve its
        //    zones against the live bank (STALE ids drop cleanly), decode each zone's WAV
        //    off-thread, and build the ZONED keymap. Each surviving zone plays its bank
        //    sample repitched from its effective root note (override > bank intrinsic > C4).
        //    A zone whose WAV fails to decode is dropped (not the whole map).
        const PerformanceMap map = performanceMap();
        Keymap km;
        bool haveKeymap = false;

        if (!map.empty()) {
            const ResolvedPerformance resolved = resolvePerformance(*banksJson, map);
            if (!resolved.zones.empty()) {
                std::vector<DecodedZonePcm> decoded;
                std::vector<ResolvedZone> kept;
                decoded.reserve(resolved.zones.size());
                kept.reserve(resolved.zones.size());
                for (const ResolvedZone& rz : resolved.zones) {
                    std::optional<DecodedZonePcm> pcm =
                        decodeRelative(projectDir, rz.relativePath, mode);
                    if (!pcm) continue;  // unreadable WAV -> drop this zone
                    kept.push_back(rz);
                    decoded.push_back(std::move(*pcm));
                }
                km = buildZonedKeymap(kept, decoded);
                haveKeymap = !km.zones.empty();
            }
        }

        // 3. Single-capture fast path (S10): an empty performance map plays the ONE
        //    deliberately-selected capture chromatically across the whole keyboard. This is
        //    the default face — one picked capture, repitched from its root. NO first-
        //    sample fallback: an EMPTY selection (or a stale id) resolves to nullopt in
        //    selectSample, so an un-picked instrument stays SILENT (the editor shows its
        //    "pick a capture" empty state) rather than auto-playing sample #1 (S10 policy
        //    reversal of the S4 convenience default).
        if (!haveKeymap) {
            std::optional<SelectedSample> sel =
                selectSample(*banksJson, selectedSampleId());
            if (sel) {
                // GA auto-default: while the channel mode is IMPLICIT (never user-toggled),
                // follow the loaded capture's channel count — a stereo capture decodes (and
                // shows) Stereo, a mono one Mono. An unknown count (0, an older bank entry)
                // changes nothing; an explicit user choice is never fought. Decode-only: the
                // output bus is fixed stereo, so no bus work follows a flip.
                if (sel->channelCount > 0) {
                    const ChannelMode desired = sel->channelCount >= 2 ? ChannelMode::Stereo
                                                                       : ChannelMode::Mono;
                    std::lock_guard<std::mutex> lock(channelModeMutex_);
                    if (!channelModeExplicit_) channelMode_ = desired;
                    mode = channelMode_;
                }
                std::optional<DecodedZonePcm> pcm =
                    decodeRelative(projectDir, sel->relativePath, mode);
                if (pcm) {
                    km = buildTier0Keymap(std::move(pcm->monoFrames), pcm->sampleRate,
                                          sel->rootNote, sel->loop,
                                          std::move(pcm->framesR));
                    haveKeymap = true;
                    resolvedId = selectedSampleId();  // the concrete pick that resolved
                }
            }
        }

        if (haveKeymap) {
            // Preserve OLA window in OUTPUT frames from the host sample rate (kPreserveWindowMs).
            // Every voice's shifter is pre-sized to this off-thread here, so process()-time
            // note-on never allocates. Floored at 2 so a valid window is always a real ring
            // (which also covers a pathological host rate <= 0 — no rate literal needed).
            std::int64_t preserveWindow = static_cast<std::int64_t>(
                kPreserveWindowMs * sampleRate_ / 1000.0 + 0.5);
            if (preserveWindow < 2) preserveWindow = 2;
            built = std::make_unique<LoadedInstrument>(
                std::move(km), static_cast<std::size_t>(builtVoiceCount), gen,
                kPreserveVoiceCap, preserveWindow, builtVoiceMode, builtMonoTrigger);
        }
    }

    // 4. Publish. Atomically install the new instrument; the DISPLACED one moves into the
    //    DRAIN slot (FA1, bug 3b) where process() keeps rendering its ringing voices —
    //    a reload never cuts a sounding note; the next note-on plays the new state. The
    //    instrument evicted FROM the drain slot (two reloads old) goes to the graveyard
    //    (process may still be mid-block reading it). A null `built` (no bank / unreadable
    //    WAV) installs silence while the displaced tails still ring out via the drain.
    //    `built` is heap-owned; release() hands ownership to the atomic; the drain-evicted
    //    pointer is re-owned by the graveyard.
    //
    publishBuiltLocked(std::move(built));
    return resolvedId;
}

void ReaSamplerProcessor::publishBuiltLocked(std::unique_ptr<LoadedInstrument> built) {
    // REQUIRES reloadMutex_ held (single-writer over both slots + the graveyard). Shared by
    // reloadFromBank and rebuildVoiceEngine — the one safety-critical swap dance.
    //
    // Bounded reclaim: free graveyard entries whose installedAt < seen, where seen is
    // the minimum installedAt process() published over the pointers it holds. Both
    // slots are monotone in installedAt, so seen is monotone and any future process()
    // load yields installedAt >= seen — an entry below seen is provably unreachable
    // (see the header proof). Remaining entries drain at setActive(false) / terminate()
    // when process is guaranteed stopped.
    const std::uint64_t seen = processGeneration_.load(std::memory_order_acquire);
    graveyard_.erase(
        std::remove_if(graveyard_.begin(), graveyard_.end(),
                       [seen](const std::unique_ptr<LoadedInstrument>& e) {
                           return e->installedAt < seen;
                       }),
        graveyard_.end());
    LoadedInstrument* prev = live_.exchange(built.release());
    LoadedInstrument* evicted = draining_.exchange(prev);
    if (evicted) graveyard_.push_back(std::unique_ptr<LoadedInstrument>(evicted));
}

void ReaSamplerProcessor::rebuildVoiceEngine() {
    // OFF THE AUDIO THREAD (the editor's voice-deck click handlers). See the header contract:
    // a voice-param change touches NO audio data, so this rebuilds the engine + preview card
    // around a COPY of the live instrument's already-decoded keymap — no bridge, no disk —
    // and publishes through the same drain-slot swap, so ringing tails survive.
    std::lock_guard<std::mutex> lock(reloadMutex_);
    LoadedInstrument* cur = live_.load(std::memory_order_acquire);
    if (!cur) return;  // nothing loaded: the new params bake into the next real reload.

    int builtVoiceCount = kDefaultVoiceCount;
    VoiceMode builtVoiceMode = VoiceMode::Poly;
    MonoTrigger builtMonoTrigger = MonoTrigger::Retrigger;
    {
        std::lock_guard<std::mutex> vp(voiceParamsMutex_);
        builtVoiceCount = voiceCount_;
        builtVoiceMode = voiceMode_;
        builtMonoTrigger = monoTrigger_;
    }

    const std::uint64_t gen = reloadGeneration_.fetch_add(1, std::memory_order_relaxed) + 1;
    // Same Preserve-window derivation as reloadFromBank (kPreserveWindowMs at the host rate).
    std::int64_t preserveWindow = static_cast<std::int64_t>(
        kPreserveWindowMs * sampleRate_ / 1000.0 + 0.5);
    if (preserveWindow < 2) preserveWindow = 2;

    // Deep-copy the decoded PCM + zones. Safe to read concurrently with process(): the keymap
    // is immutable after construction, and under reloadMutex_ nobody can free `cur`.
    Keymap km = cur->keymap;
    auto built = std::make_unique<LoadedInstrument>(
        std::move(km), static_cast<std::size_t>(builtVoiceCount), gen,
        kPreserveVoiceCap, preserveWindow, builtVoiceMode, builtMonoTrigger);
    publishBuiltLocked(std::move(built));
}

void ReaSamplerProcessor::retireIdleDrain() {
    // Phase S (FA1-review Major #2). Cheap early-out BEFORE the lock: 0 means "no drain, or
    // it still sounds" — the common case costs one relaxed load and no mutex.
    const std::uint64_t idleGen = drainIdleGeneration_.load(std::memory_order_acquire);
    if (idleGen == 0) return;
    std::lock_guard<std::mutex> lock(reloadMutex_);
    LoadedInstrument* drain = draining_.load(std::memory_order_acquire);
    // Retire ONLY if the publication names the drain currently in the slot. A stale value
    // (about an already-evicted, older drain) can never match the newer occupant's
    // installedAt — the slot is monotone in generation — so a mid-swap race is closed by
    // this identity check, not by timing.
    if (!drain || drain->installedAt != idleGen) return;
    draining_.store(nullptr, std::memory_order_release);
    graveyard_.push_back(std::unique_ptr<LoadedInstrument>(drain));
    // Prune what is now provably unreachable — the same monotone-generation proof as the
    // reload path's reclaim (see reloadFromBank): an entry with installedAt < seen cannot be
    // held by process() now or ever again. The just-parked drain frees here immediately when
    // process() has already published past it; otherwise on the next reload/retire/deactivate.
    const std::uint64_t seen = processGeneration_.load(std::memory_order_acquire);
    graveyard_.erase(
        std::remove_if(graveyard_.begin(), graveyard_.end(),
                       [seen](const std::unique_ptr<LoadedInstrument>& e) {
                           return e->installedAt < seen;
                       }),
        graveyard_.end());
}

ReaSamplerProcessor::BankSyncResult
ReaSamplerProcessor::pollBankSync(bool isFocusedTarget) {
    // OFF THE AUDIO THREAD (the editor's UI timer calls this). Both reads allocate and call
    // REAPER via the bridge — never invoked from process(). A disconnected bridge (non-REAPER
    // host, or before connect) yields nullopt for both reads, so this no-ops cleanly.
    BankSyncResult result;

    // Phase S: park an idle drain snapshot in the graveyard (and prune) on the same UI-timer
    // cadence that drives reloads — an edited-away instrument stops costing memory as soon
    // as its tails die instead of squatting in the drain slot until the next reload.
    retireIdleDrain();

    // --- S8: assignment-request consume FIRST -------------------------------------
    // Decode the pending assignment request (nullopt when absent/malformed). Resolve its
    // (bankId, sampleId) against the live bank blob: selectSample returns non-nullopt only when
    // the sampleId names an existing sample (the reader requirement — an unresolvable pair is
    // dropped). Then run the pure consume decision against this instance's persisted marker.
    std::optional<AssignmentRequest> request;
    if (auto raw = bridge_.readReasamplerExtState(kProjExtAssignKey)) {
        request = decodeAssignmentRequest(*raw);
    }

    bool resolves = false;
    if (request) {
        // Resolve the assigned sample against the CURRENT bank blob (a fresh read, so a request
        // whose sample was rolled back by an extension undo resolves to nullopt -> dropped).
        if (auto banksJson = bridge_.readReasamplerExtState(kProjExtBanksKey)) {
            resolves = selectSample(*banksJson, request->sampleId).has_value();
        }
    }

    // Read lastConsumed and conditionally write it back under a single lock scope so there
    // is no interleave window between the read and the write (a concurrent getState could
    // otherwise observe a stale marker between the two separate lock acquisitions).
    std::int64_t lastConsumed = 0;
    const AssignConsumeDecision decision = [&] {
        std::lock_guard<std::mutex> lock(assignMarkerMutex_);
        lastConsumed = lastConsumedAssignGeneration_;
        const AssignConsumeDecision d =
            consumeDecision(request, lastConsumed, resolves, isFocusedTarget);
        // Advance the persisted consumed marker whenever the decision consumed the request
        // (applied OR dropped-as-seen). getState will persist it on the next project save so
        // a re-open does not re-apply. A non-target instance leaves the marker (decision
        // returns it unchanged) so it stays eligible if focus later lands here.
        if (d.consumedGeneration != lastConsumed) {
            lastConsumedAssignGeneration_ = d.consumedGeneration;
        }
        return d;
    }();

    if (decision.apply) {
        // Apply the assignment as this instance's own selection (the same path a user card-pick
        // takes) — the instrument updates its OWN state, never the bank. reloadFromBank below
        // rebuilds against the new selection, so skip a redundant reload here.
        setSelectedSampleId(decision.sampleId);
        // Zone-bleed fix (3a), peer of the editor's Browse Load: a stale full-range zone
        // materialized for the previously loaded sample would shadow the assigned pick under
        // first-match resolve. Authored maps (any narrow key range) are untouched.
        PerformanceMap reconciled = performanceMap();
        if (reconcileSingleCaptureZones(reconciled, decision.sampleId)) {
            setPerformanceMap(reconciled);
        }
        result.applied = true;
    }

    // --- S9: bank-generation change-detection -------------------------------------
    // Read the generation stamp; parse (absent/malformed -> 0, the pre-S9 default). FIRST poll
    // (lastSeenBankGeneration_ == -1 sentinel): BASELINE the seen value without a reload — setState
    // already loaded the current bank, so a redundant reload on open would only churn. A later
    // generation CHANGE (a recapture/ingest/remove, or an undo that lowers it) then drives the
    // reload. An assignment we just applied also needs a reload; fold both into ONE (coalesced).
    std::int64_t currentGen = kBankGenerationAbsent;
    if (auto rawGen = bridge_.readReasamplerExtState(kProjExtBankGenKey)) {
        currentGen = parseBankGeneration(*rawGen);
    }
    const bool firstPoll = (lastSeenBankGeneration_ < 0);
    const bool genChanged =
        !firstPoll && bankGenerationChanged(lastSeenBankGeneration_, currentGen);
    lastSeenBankGeneration_ = currentGen;

    if (genChanged || result.applied) {
        reloadFromBank();  // atomic pointer-swap handoff — glitch-free mid-play (S4 graveyard)
        result.reloaded = genChanged;  // report S9 vs S8 distinctly for the editor's reaction
    }
    return result;
}

tresult PLUGIN_API ReaSamplerProcessor::process(ProcessData& data) {
    // REAL-TIME: no allocation, no IO, no locks. Load the live AND draining instruments
    // once for the whole block (two atomic acquires), then publish the MINIMUM installedAt
    // over the pointers held so the off-thread graveyard pruner knows exactly which
    // generations this block is holding (see the header proof).
    //
    // We publish installedAt — not a fresh re-read of reloadGeneration_ — to close an
    // ordering race: reading reloadGeneration_ after the slots could observe a generation
    // newer than the pointers we actually hold, causing the pruner to free an instrument
    // process is still reading. installedAt was set on the reload path before the atomic
    // exchange that made the instrument visible.
    //
    // The DRAIN instrument (FA1, bug 3b) is the previously-live snapshot displaced by the
    // last reload: its already-sounding voices keep rendering (and receive note-offs) so a
    // curve/param edit or bank refresh never cuts a ringing note. It receives NO note-ons.
    // A racing reload can briefly leave the same pointer in both slots (live_ was loaded
    // before the swap, draining_ after); collapse that to live-only so one engine is never
    // advanced twice per frame.
    LoadedInstrument* inst = live_.load(std::memory_order_acquire);
    LoadedInstrument* drain = draining_.load(std::memory_order_acquire);
    if (drain == inst) drain = nullptr;
    std::uint64_t heldGen = 0;
    if (inst && drain) {
        heldGen = inst->installedAt < drain->installedAt ? inst->installedAt
                                                         : drain->installedAt;
    } else if (inst) {
        heldGen = inst->installedAt;
    } else if (drain) {
        heldGen = drain->installedAt;
    }
    processGeneration_.store(heldGen, std::memory_order_release);

    // Phase S drain retirement: publish whether the drain snapshot is FULLY idle (every engine
    // voice AND its preview card silent) by naming its OWN installedAt (0 = no drain / still
    // sounding). Evaluated at block START — idleness is monotone for a drain (it receives no
    // note-ons), so a snapshot observed idle here stays idle; a tail that dies mid-block simply
    // publishes one block later. Bounded scan (<= maxVoices), relaxed store — RT-safe.
    drainIdleGeneration_.store(
        (drain && drain->fullyIdle()) ? drain->installedAt : 0,
        std::memory_order_relaxed);

    // Marshal MIDI note-on/off from the event input into the voice engine. Tier 0 maps
    // events at block granularity (no per-event sample-offset split) — audible timing is
    // within one block, adequate for Tier 0; sample-accurate scheduling is a later tier.
    // Note-offs also route to the DRAIN engine so a note held across a reload releases
    // its old-snapshot voice too (otherwise it would sustain until the next reload).
    if (data.inputEvents) {
        const int32 count = data.inputEvents->getEventCount();
        for (int32 i = 0; i < count; ++i) {
            Event e;
            if (data.inputEvents->getEvent(i, e) != kResultOk) continue;
            if (e.type == Event::kNoteOnEvent) {
                // A note-on with velocity 0 is a note-off by MIDI convention.
                const int vel = static_cast<int>(e.noteOn.velocity * 127.0f + 0.5f);
                if (vel <= 0) {
                    if (inst) inst->engine.noteOff(e.noteOn.pitch);
                    if (drain) drain->engine.noteOff(e.noteOn.pitch);
                } else if (inst) {
                    inst->engine.noteOn(e.noteOn.pitch, vel);
                }
            } else if (e.type == Event::kNoteOffEvent) {
                if (inst) inst->engine.noteOff(e.noteOff.pitch);
                if (drain) drain->engine.noteOff(e.noteOff.pitch);
            } else if (e.type == Event::kLegacyMIDICCOutEvent) {
                // PANIC (Phase S voice-review Major #2): REAPER delivers raw input MIDI CC to a
                // VST3 instrument as kLegacyMIDICCOut events on the INPUT event list (a REAPER-ism
                // — the type is nominally an output event; DAW-verify, see handoff).
                //   CC 123 (All Notes Off): release semantics — Gate voices enter their AHDSR
                //     release tail; Trigger one-shots play through their bounded play length.
                //   CC 120 (All Sounds Off): hard-stop semantics — immediate silence regardless
                //     of play mode, including Trigger one-shots that ignore CC 123. This is the
                //     true "panic" for a ringing one-shot (e.g. a full-length capture).
                // Both clear the mono held stack. Both apply to live AND drain, engine AND preview.
                // allNotesOff / allSoundsOff / releaseAll / hardStop are RT-safe (no allocation,
                // bounded scans).
                const auto cc = static_cast<int>(e.midiCCOut.controlNumber);
                if (cc == kCtrlAllSoundsOff) {
                    if (inst) {
                        inst->engine.allSoundsOff();
                        inst->preview.hardStop();
                    }
                    if (drain) {
                        drain->engine.allSoundsOff();
                        drain->preview.hardStop();
                    }
                } else if (cc == kCtrlAllNotesOff) {
                    if (inst) {
                        inst->engine.allNotesOff();
                        inst->preview.releaseAll();
                    }
                    if (drain) {
                        drain->engine.allNotesOff();
                        drain->preview.releaseAll();
                    }
                }
            }
        }
    }

    // S-VIEW-4 preview mailbox: drain the off-thread preview-trigger requests (a single relaxed
    // atomic load each — RT-safe). A request is NEW when its packed sequence differs from the last
    // one we consumed; fire it once, then latch the sequence so the same request never re-fires.
    // Phase S: preview note-on/off drive the dedicated PREVIEW CARD — a single voice structurally
    // OUTSIDE the MIDI pool, so a full pool can never drop a preview and a preview can never
    // steal a playing MIDI voice (the FA1-review isolation fix). Host MIDI routes ONLY to the
    // engine (above); the card is summed alongside it in the render below.
    // Consume (advance the sequence) even when inst is null so a note-on posted while no instrument
    // is loaded does not re-fire stale on the next instrument load.
    {
        const std::uint32_t on = previewOnRequest_.load(std::memory_order_acquire);
        const std::uint16_t onSeq = static_cast<std::uint16_t>(on >> 16);
        if (onSeq != 0 && onSeq != previewOnConsumed_) {
            previewOnConsumed_ = onSeq;
            if (inst) {
                const int vel = static_cast<int>((on >> 8) & 0xFF);
                const int note = static_cast<int>(on & 0xFF);
                if (vel > 0) inst->preview.noteOn(note, vel);
            }
        }
    }
    if (inst || drain) {
        const std::uint32_t off = previewOffRequest_.load(std::memory_order_acquire);
        const std::uint16_t offSeq = static_cast<std::uint16_t>(off >> 16);
        if (offSeq != 0 && offSeq != previewOffConsumed_) {
            previewOffConsumed_ = offSeq;
            // Route the preview note-off to BOTH cards (mirror of the host note-off): a
            // preview held across a reload — e.g. a curve edit committed mid-press — must
            // release the old-snapshot card now draining, not just the (fresh) live one.
            if (inst) inst->preview.noteOff(static_cast<int>(off & 0xFF));
            if (drain) drain->preview.noteOff(static_cast<int>(off & 0xFF));
        }
    }

    if (data.numOutputs <= 0 || !data.outputs || data.numSamples <= 0) {
        embedPeak_.store(0.f, std::memory_order_relaxed);
        return kResultOk;
    }
    AudioBusBuffers& out = data.outputs[0];
    const int32 frames = data.numSamples;

    // 64-bit host processing is not supported by the mono float core; emit silence
    // rather than mis-render. REAPER runs 32-bit float by default.
    if (data.symbolicSampleSize != kSample32) {
        embedPeak_.store(0.f, std::memory_order_relaxed);
        for (int32 ch = 0; ch < out.numChannels; ++ch) {
            if (double* buf = out.channelBuffers64[ch]) {
                for (int32 i = 0; i < frames; ++i) buf[i] = 0.0;
            }
        }
        out.silenceFlags = (out.numChannels >= 64)
                               ? ~0ULL
                               : ((1ULL << out.numChannels) - 1);
        return kResultOk;
    }

    // Render per the host's NEGOTIATED output channel count (S7). The channel mode was baked
    // into the LoadedInstrument's decode + negotiated onto the output bus off-thread, so here
    // we simply match the buffers the host handed us: >=2 channels -> true stereo render into
    // ch0/ch1 (then replicate any extra channels); exactly 1 -> the mono render. Either way the
    // render ADDS into a cleared buffer — RT-safe (no alloc/IO/lock). NEVER reads the mode here.
    float* ch0 = out.numChannels > 0 ? out.channelBuffers32[0] : nullptr;
    float* ch1 = out.numChannels > 1 ? out.channelBuffers32[1] : nullptr;
    // The PLUG-IN owns output silenceFlags (VST3 contract). Claim non-silence on every rendered
    // block — a stale host-side flag left unwritten could mute a channel downstream (GA).
    out.silenceFlags = 0;
    if (ch0 && ch1) {
        // Stereo: clear both, render L/R. A mono sample plays dual-mono via the engine's stereo
        // path (both channels equal), so a mono capture in stereo mode is centered, not silent.
        // The DRAIN engine's ringing tails ADD on top (render mixes into the cleared buffer).
        for (int32 i = 0; i < frames; ++i) { ch0[i] = 0.f; ch1[i] = 0.f; }
        if (inst) {
            inst->engine.render(ch0, ch1, static_cast<std::size_t>(frames));
            inst->preview.render(ch0, ch1, static_cast<std::size_t>(frames));
        }
        if (drain) {
            drain->engine.render(ch0, ch1, static_cast<std::size_t>(frames));
            drain->preview.render(ch0, ch1, static_cast<std::size_t>(frames));
        }
        // FB1 post-mixer master gain: ramp gainCurrent_ toward the atomic target per-sample so
        // continuous knob drags produce no zipper noise and the true-zero bottom causes no click.
        // Applied AFTER the voice sum and BEFORE the extra-channel mirror + peak so both see the
        // actual output. Branch-free inner loop; early-out when already at target. RT-safe.
        {
            const float gTarget = masterGain_.load(std::memory_order_relaxed);
            const float diff = gTarget - gainCurrent_;
            if (diff < -kGainRampSnap || diff > kGainRampSnap) {
                // Ramp toward target: step per sample, then apply the per-sample gain.
                for (int32 i = 0; i < frames; ++i) {
                    const float d = gTarget - gainCurrent_;
                    if (d > kGainRampRate) gainCurrent_ += kGainRampRate;
                    else if (d < -kGainRampRate) gainCurrent_ -= kGainRampRate;
                    else gainCurrent_ = gTarget;
                    ch0[i] *= gainCurrent_;
                    ch1[i] *= gainCurrent_;
                }
            } else {
                gainCurrent_ = gTarget;
                if (gTarget != 1.f) {
                    for (int32 i = 0; i < frames; ++i) { ch0[i] *= gTarget; ch1[i] *= gTarget; }
                }
            }
        }
        // Any channels beyond the first two mirror ch0 (defensive — REAPER negotiates 1 or 2).
        for (int32 ch = 2; ch < out.numChannels; ++ch) {
            if (float* buf = out.channelBuffers32[ch]) {
                for (int32 i = 0; i < frames; ++i) buf[i] = ch0[i];
            }
        }
        // Block peak (max across L/R) for the embed strip's level indicator; RT-safe.
        float peak = 0.f;
        for (int32 i = 0; i < frames; ++i) {
            const float a0 = ch0[i] < 0.f ? -ch0[i] : ch0[i];
            const float a1 = ch1[i] < 0.f ? -ch1[i] : ch1[i];
            if (a0 > peak) peak = a0;
            if (a1 > peak) peak = a1;
        }
        embedPeak_.store(peak, std::memory_order_relaxed);
    } else if (ch0) {
        // Mono: render into channel 0, replicate to any extra channels (mono bus is 1 channel;
        // the replicate is defensive for a host that still hands >1 channel on a mono bus).
        for (int32 i = 0; i < frames; ++i) ch0[i] = 0.f;
        if (inst) {
            inst->engine.render(ch0, static_cast<std::size_t>(frames));
            inst->preview.render(ch0, static_cast<std::size_t>(frames));
        }
        if (drain) {
            drain->engine.render(ch0, static_cast<std::size_t>(frames));
            drain->preview.render(ch0, static_cast<std::size_t>(frames));
        }
        // FB1 post-mixer master gain (mono path) — same ramp contract as the stereo branch:
        // post-sum, pre-peak/replicate, per-sample gainCurrent_ ramp toward target, RT-safe.
        {
            const float gTarget = masterGain_.load(std::memory_order_relaxed);
            const float diff = gTarget - gainCurrent_;
            if (diff < -kGainRampSnap || diff > kGainRampSnap) {
                for (int32 i = 0; i < frames; ++i) {
                    const float d = gTarget - gainCurrent_;
                    if (d > kGainRampRate) gainCurrent_ += kGainRampRate;
                    else if (d < -kGainRampRate) gainCurrent_ -= kGainRampRate;
                    else gainCurrent_ = gTarget;
                    ch0[i] *= gainCurrent_;
                }
            } else {
                gainCurrent_ = gTarget;
                if (gTarget != 1.f) {
                    for (int32 i = 0; i < frames; ++i) ch0[i] *= gTarget;
                }
            }
        }
        float peak = 0.f;
        for (int32 i = 0; i < frames; ++i) {
            const float a = ch0[i] < 0.f ? -ch0[i] : ch0[i];
            if (a > peak) peak = a;
        }
        embedPeak_.store(peak, std::memory_order_relaxed);
        for (int32 ch = 1; ch < out.numChannels; ++ch) {
            if (float* buf = out.channelBuffers32[ch]) {
                for (int32 i = 0; i < frames; ++i) buf[i] = ch0[i];
            }
        }
    }

    // Report silence only when nothing is loaded (lets the host optimize when idle).
    // With an instrument loaded — or a drain snapshot still ringing out — we clear the
    // flag so a ringing voice is not skipped.
    out.silenceFlags = (inst || drain) ? 0
                                       : ((out.numChannels >= 64)
                                              ? ~0ULL
                                              : ((1ULL << out.numChannels) - 1));
    return kResultOk;
}

IPlugView* PLUGIN_API ReaSamplerProcessor::createView(FIDString name) {
    if (name && FIDStringsEqual(name, ViewType::kEditor)) {
        return new ReaSamplerEditor(this);
    }
    return nullptr;
}

}  // namespace reasampler::vst