instrument: one staged-envelope system — per-segment curves, the sustain-less AHD, and a shared overlay for all three envelopes

Trigger's fade pair folds into the AHD (and goes live); the release anchors right;
Preserve rings its synthetic tail out instead of cutting it. Payload v10.

src/core/instrument/CLAUDE.md

@@ -9,8 +9,8 @@ subdirectories:
   velocity curve, and master-gain taper math.
 - **`map/`** — the capture resolution + `SampleData` build, the cross-artifact
   `ComponentState` codec, and the small pure helpers the engine/shell share
-  (bank-generation sync, bridge-read marshalling, note-name parsing, Trigger
+  (bank-generation sync, bridge-read marshalling, note-name parsing, the Trigger
-  frame↔fraction conversion).
+  play-span formula).
 - **`note/`** — the programmed capture-signal model: musical-division note length, tempo
   resolution, and anchored start/end offsets — the one record and resolver a
   capture-signal popup and the offline bake read from, so they cannot diverge.
@@ -120,13 +120,17 @@ pitch envelope/curve (AD?) which is off by default."*
   note-off, `level→0` over release. `holdFrames == 0` is exactly the pre-Gate ADSR — a
   back-compat degenerate.
 - **Trigger — one-shot drum-pad.** Note-on fires playback of a defined `%` of sample
-  length with a fade-in and fade-out ramp; note-off is ignored (the voice plays through,
+  length; note-off is ignored (the voice plays through, no sustain loop). Frame span
-  no sustain loop). Frame span `[startFrame, playEnd)` where `playEnd = startFrame +
+  `[startFrame, playEnd)` where `playEnd = startFrame +
-  round(lengthFraction·(frames − startFrame))`; amplitude ramps `0→1` over
+  round(lengthFraction·(frames − startFrame))`. The amplitude over that span is the staged
-  `fadeInFrames` at the head and `1→0` over `fadeOutFrames` anchored to `playEnd`; fades
+  **AHD** (below), not a fade pair. **Note-off in Trigger is a no-op** — choke-on-note-off
-  clamp so `fadeInFrames + fadeOutFrames ≤ play length`. Fade curve is equal-power
+  is held/out of scope (fork S15-F1).
-  (constant-power sin/cos). **Note-off in Trigger is a no-op** — choke-on-note-off is
+
-  held/out of scope (fork S15-F1).
+  > **Superseded, do not reintroduce:** Trigger's amplitude was once a fade-in/unity/
+  > fade-out shape with its own equal-power curve and its own `fadeInFrames`/`fadeOutFrames`
+  > pair, clamped so the two fades fit the span. That is retired — one staged-envelope
+  > design now covers what were two mechanisms. A saved instance's fades lift onto the AHD
+  > at the codec boundary (attack ← fade-in, decay ← fade-out, hold ← the remainder).
 - **Both modes: modifiable start point.** Playback begins at `startFrame` (clamped `0 ≤
   startFrame < frames`). Gate additionally has modifiable loop points; Trigger has none.
 - **Pitch engine — Varispeed vs Preserve (S16).** Varispeed (current/
@@ -138,12 +142,12 @@ pitch envelope/curve (AD?) which is off by default."*
   Contract for Gate's sustain loop under Preserve: *loop the source, shift the output*
   (loop points stay source-frame facts). `WDL_Resampler` is **not** a Preserve engine (it
   is a resampler that couples duration) — never wire it as the duration-preserving path.
-- **Pitch envelope — AD, off by default.** A short attack-decay pitch-offset curve
+- **Pitch envelope — AHD, off by default.** A pitch-offset curve rising to `peakSemitones`
-  (`peakSemitones` over `attackFrames`, decaying to 0 over `decayFrames`) riding on top of
+  over attack, holding, then decaying to 0, riding on top of whichever pitch engine; a zero
-  whichever pitch engine; a zero attack gives a pure percussive pitch drop. **Off by
+  attack gives a pure percussive pitch drop. **Off by default** — a regression that applies
-  default** — a regression that applies pitch modulation when the envelope is disabled is
+  pitch modulation when the envelope is disabled is a bug. Its hold fraction defaults to 0,
-  a bug. Under Varispeed the offset is a per-frame multiply of `ratio_`; under Preserve it
+  which is exactly the attack-decay shape it grew out of. Under Varispeed the offset is a
-  is added to the shifter's shift amount.
+  per-frame multiply of `ratio_`; under Preserve it is added to the shifter's shift amount.
 - **Preserve RT discipline.** The shifter pre-warms at voice-allocation; no allocation in
   `process()` in steady state. **Note (supersedes an earlier framing):** the
   shifter's onset latency (~25 ms, half-window) was once described as "an
@@ -201,19 +205,33 @@ automatable parameters."* It rejects the precedent, not one instance of it.
 - **Do not spec Tier 2/3** from this directory. Tier 2 is held, Tier 3 is
   optional-forever; don't let their feature lists drive Tier 0–1's build shape.
 
-### Envelope overlay + draggable nodes (S-VIEW, settled 2026-07-27, landed)
+### The envelope overlay — one graphical surface, every envelope (S-VIEW, extended)
 
-The amp envelope is drawn as a curve over the Sample view's hero waveform at the shared
+The overlay draws ONE envelope over the Sample view's hero waveform, and WHICH one is a
-time base — Gate → the AHDSR shape, Trigger → the fade-in/unity/%-length/fade-out shape
+transient editor choice: each envelope deck (amp, pitch, filter) carries a corner radio, at
-anchored to `playEnd`. **The overlay is directly editable — draggable nodes
+most one is overlay-active, and **none is a valid resting state — the editor opens there.**
-(SETTLED, S-VIEW-F2).** Dragging a node and the existing sliders are two surfaces onto
+Never persisted; it selects what is drawn, not what is played.
-one model: both read/write the same envelope fields of the one parameter set, so a drag
+
-updates the params, the sliders reflect them live, and a slider edit re-lays the nodes —
+**The overlay is directly editable — draggable nodes (SETTLED, S-VIEW-F2), plus a round
-one source of truth, structural (re-read-every-paint), not a listener chain. Nodes are
+mid-segment knot per sloped stage that sets that stage's curve exponent.** A node drag, a
-monotonic in time (a node cannot be dragged past its neighbours) and range-clamped to the
+knot drag and the deck knobs are surfaces onto ONE model: all three read/write the same
-same per-param min/max the sliders enforce, so node-drag can never produce a param the
+fields of the one parameter set, so an edit on any of them re-lays the others — one source
-slider couldn't. Two pure modules split the forward (draw) and inverse (edit) maps — see
+of truth, structural (re-read-every-paint), never a listener chain. Every drag is
-`envelope_overlay` and `envelope_edit` in Modules below.
+range-clamped to the same per-param min/max the knobs enforce, so no drag can produce a
+param a knob couldn't. Two pure modules split the forward (draw) and inverse (edit) maps —
+see `envelope_overlay` and `envelope_edit` in Modules below.
+
+**Which shape an envelope takes is decided by the play mode, not by what it modulates:**
+pitch is always AHD; amp and filter are AHDSR in Gate and AHD in Trigger. Both mode shapes
+are STORED per envelope, so flipping modes cannot lose either mode's dialled values (the
+migration case forces it: an old instance carries both its AHDSR values and its Trigger
+fades, and one shared set could not preserve both modes' prior sound).
+
+**And which LAYOUT an envelope takes follows from whether it has a sustain stage** — the
+same rule, applied once: an AHDSR right-anchors its release (the end point is fixed at the
+canvas edge and release is dragged from its top node), a sustain-less AHD maps 1:1 onto the
+waveform's time axis. The two policies coexist rather than merge; the 1:1 mapping only means
+anything for a trigger shape.
 
 ### Parameter ownership and persistence (D-B)
 
@@ -235,7 +253,7 @@ slider couldn't. Two pure modules split the forward (draw) and inverse (edit) ma
 
 - The engine is the `sampler_core` CMake target over FOUR headers and TWO TUs, split on its own responsibility seam — cold note routing vs the hot per-sample render:
   - `play_params.h` — the value layer: `PlayParams`/`AdsrParams`/`TriggerParams`/`PitchEnvParams`/`FilterParams`, the per-instance mode enums (`ChannelMode`/`VoiceMode`/`MonoTrigger`), and `SampleData` (the ONE loaded capture: decoded PCM + root + loop + start + keyTrack + velocity curve + play params). Shared by the engine, the codec, and the editor, so a UI/codec TU reading a param struct doesn't recompile when a `Voice` member changes. `FilterParams` stores the filter module's own `FilterSettings` by value rather than a parallel copy of its normalized positions.
-  - `envelopes.h` — the three per-frame evaluators (`AdsrEnvelope` AHDSR, `TriggerEnvelope` fade shape, `PitchEnvelope` AD offset), CONCRETE and fully header-inline. Never give them a common base or a virtual `tick()`: they are called per-voice-per-sample. The filter envelope is a SECOND `AdsrEnvelope` instance on the voice, not a fourth class. `AdsrEnvelope`/`PitchEnvelope` also own `applyLive` (the φ-holding mid-stage rule), its fresh-note peer `snapLive`, and `StepSmoother`, the bounded offset that absorbs the two level steps φ cannot cover.
+  - `envelopes.h` — the three per-frame evaluators (`AdsrEnvelope` AHDSR, `AhdEnvelope` the sustain-less Attack/Hold/Decay, `PitchEnvelope` the AHD pitch offset), CONCRETE and fully header-inline. Never give them a common base or a virtual `tick()`: they are called per-voice-per-sample. Also home to `fitAhd`/`ahdLevelAt`, THE span split and shape every sustain-less envelope shares. A voice carries two of each shape — the amp's and the filter's — and its play mode picks which pair it reads. `AdsrEnvelope`/`PitchEnvelope` own `applyLive` (the φ-holding mid-stage rule), its fresh-note peer `snapLive`, and `StepSmoother`, the bounded offset that absorbs the level steps φ cannot cover; `AhdEnvelope` is POSITIONAL (evaluated at a source offset, not ticked), so it has no phase to hold and smooths a live reshape instead.
   - `live_params.h` / `live_params.cpp` — the live-parameter block: `LiveValues` (the plain, trivially-copyable bundle the audio thread observes), the single-writer `LiveParams` seqlock that publishes it without a lock or a torn read, `foldLive` (the ONE derivation from `PlayParams` — every publisher goes through it so the two representations cannot drift), and `ValueRamp`, the per-frame glide whose EXACT termination is what lets the filter's equality-compare cutoff skip re-engage. Links no engine: the block is a value the voice observes, not a thing the engine owns.
   - `voice.h` / `voice.cpp` — one voice. The per-SAMPLE render half (`advanceFrame` and everything it calls) is INLINE IN THE HEADER by RT constraint; the per-NOTE half (note-on setup incl. the Preserve ring prime, legato retune, gate-off, the off-thread shifter presize) is out of line in the TU. The voice owns its own `VoiceFilter` and filter envelope, run between the pitch stage and the amp multiply — see `engine/filter/CLAUDE.md`.
   - `voice_engine.h` / `voice_engine.cpp` — `VoiceEngine`: note routing, bounded-stealing allocation, user-parameterized voice count (1–32, default 16), `VoiceMode` Poly/Mono (last-note held-note stack, `MonoTrigger` Retrigger/Legato), two-tier panic (CC 123 = all-notes-off release, CC 120 = immediate hard-stop including Trigger one-shots), and the block render loops. Preview injects a synthetic note-on at the loaded capture's root note into the main `VoiceEngine` — no dedicated `PreviewCard`; preview obeys polyphony/mono/voice-stealing/envelopes.
@@ -247,9 +265,10 @@ slider couldn't. Two pure modules split the forward (draw) and inverse (edit) ma
 
 - `sample_map` — the bank blob → selected capture resolve, the channel policy (downmix / dual-mono / L-R split), `InstrumentParams` (the ONE parameter set: root/loop/start overrides, keyTrack, velocity curve, `PlaySeconds`), the single override-beats-intrinsic fold (`resolveCapture`, shared by the bank and refs paths so they cannot drift), and the `SampleData` build. **Wall-clock times stored as rate-free SECONDS, resolved against the live project rate — NO hardcoded sample rates in `src/`** (Daniel's standing ruling, load-bearing). Deliberately does NOT link the voice engine: the build's product is plain `SampleData`.
 - `component_state_io` (`core/instrument/map`) — the `ComponentState` envelope + params-payload binary codec (envelope v1…v11, params payload v1…v9), split out of `sample_map` (Q-W2v, T4-13 ≡ T2-07) so BOTH artifacts can link the codec without the extension pulling in the whole voice engine to serialize one preset blob — the extension's `instrument_drop` and the instrument's processor read/write the identical bytes, so the cross-artifact contract cannot drift. Payload v1…v7 are the RETIRED per-zone lists: still read, lifting by adopting zone one's capture + parameters (that first zone is what the old first-match resolve actually played, so it is also what supersedes the envelope's stored selection id). Payload v9 appends the per-voice filter tail; a v8 blob is a strict prefix of it and lifts to the off/neutral filter default.
+- `params_payload` — the PARAMS-PAYLOAD half of that codec, split from the envelope half on the axis the format already has: the payload carries its own version and grows independently, so the two version ladders are two responsibilities. An INTERNAL seam — the public entry points stay `serialize`/`deserializeComponentState`. The prose ladder and every version constant stay in `component_state_io.h`, their one home.
 - `bank_sync` — generation change-detection + assignment-request consume: owns the yes/no decision logic so the rules are provable without a host. The processor shell owns cadence and side effects.
 - `bridge_marshal` — pure marshalling helper for the REAPER VST-host bridge read: interprets the `GetProjExtState` int return against its filled buffer.
-- `trigger_seam` — pure Trigger frames↔fraction converter: owns the shared formula for converting between engine source-frame fade counts and the overlay's fractional representation, threading `startFrame` correctly through pack and unpack directions.
+- `trigger_seam` — the shared Trigger play-SPAN formula: how the stored %-length becomes the source-frame span the voice plays and the overlay draws over, threading `startFrame` correctly. (Its fade frames↔fraction converters retired with the fade pair itself.)
 
 ### `ui/`
 
@@ -266,13 +285,13 @@ slider couldn't. Two pure modules split the forward (draw) and inverse (edit) ma
 - `knob_deck` — pure knob-deck layout + hit-test (FB1): group-box / caption-row / compact-toggle / knob-cell geometry, deterministic whole-group wrap, `DeckLayout` / `DeckHit`. Mirror of `action_bar`/`param_slider`; no LICE or REAPER types.
 - `deck_groups` — also home to `isLiveDeckParam` and `liveCommitFor`, the editor's whole commit-tier routing decision (see "Live parameter delivery" above); WHICH groups the Sample face's deck carries, split from `knob_deck`'s HOW they lay out: the `DeckParam` control-id space (the editor's `ParamControl` is an alias of it), the `DeckGroupId` list, `sampleDeckGroups` in signal-flow order (**pitch → filter → amp**, then voice/master), and the deck's bipolar-knob law. Reads `PlayMode` for the AMP group's Gate/Trigger face, which is why this and not `knob_deck` is the module that touches the engine's value layer.
 - `curve_popup` — pure curve-popup geometry + dismissal test (FB1): centered sheet over the Sample face — width/height clamps, title row, Close button rect, curve-box rect, outside-sheet dismissal test. Mirror of `overflow_menu`; no LICE or REAPER types.
-- `envelope_overlay` — pure amp-envelope→polyline geometry for the Sample-view envelope overlay (read from `envelope_overlay.h`): maps Gate's AHDSR shape or Trigger's fade-in/unity/%-length/fade-out shape to a polyline inside a rect at the shared time base (Gate: a bounded param-domain schematic, sample-length-free; Trigger: PCM-aligned wall-clock), every vertex clamped in-canvas (`x`/`y` inside the rect). Shares the `EnvNode`/`AmpEnvelope`/`timeToX`/`levelToY` vocabulary with `envelope_edit` so the drawn handle and its grab region agree pixel-for-pixel. No VST3/REAPER/LICE types at the boundary.
+- `envelope_overlay` — pure staged-envelope→polyline geometry for the Sample-view overlay (read from `envelope_overlay.h`): maps a `StageEnvelope` to a polyline inside a rect under whichever of TWO layout policies its `EnvKind` selects — an AHDSR draws a bounded param-domain schematic with its release RIGHT-ANCHORED to the canvas edge, an AHD draws 1:1 over the waveform's own time axis — plus a round mid-segment knot on every sloped stage that has a duration. Every vertex clamped in-canvas. Shares the `EnvNode`/`StageEnvelope`/`timeToX`/`levelToY` vocabulary with `envelope_edit` so the drawn handle and its grab region agree pixel-for-pixel. No VST3/REAPER/LICE types at the boundary.
-- `envelope_edit` — pure node hit-test + pixel-delta→clamped-param inverse map for the draggable envelope nodes (read from `envelope_edit.h`): `nodeAtPoint` resolves a grab to the nearest node within a pick radius (Chebyshev distance, draw-order tie-break); `resolveNodeDrag` maps a pixel delta since grab to a new `AmpEnvelope`, enforcing monotonic-in-time ordering between neighbouring nodes and the same caller-supplied per-param clamp bounds the sliders use — a drag can never produce a param a slider couldn't. Mirror of `card_drag`/`waveform_view`; the inverse of `envelope_overlay`'s params→polyline forward map, so node-drag and slider-edit read/write one shared model and can never diverge.
+- `envelope_edit` — pure node hit-test + pixel-delta→clamped-param inverse map for the draggable envelope nodes and their curve knots (read from `envelope_edit.h`): `nodeAtPoint` resolves a grab to the nearest node within a pick radius (Chebyshev distance, draw-order tie-break, knots appended last so a coincident endpoint handle wins); `resolveNodeDrag` maps a pixel delta since grab to a new `StageEnvelope` under the same caller-supplied per-param clamp bounds the knobs use — a drag can never produce a param a knob couldn't. Mirror of `card_drag`/`waveform_view`; the inverse of `envelope_overlay`'s params→polyline forward map, so node-drag, knot-drag and knob-edit read/write one shared model and can never diverge.
 
 ## Gotchas
 
-- **Gate's envelope-overlay x-axis is schematic, not PCM-aligned** (per `envelope_overlay.h`'s FA2 contract note) — it does NOT line up with the waveform under it; only Trigger's x-axis is wall-clock/PCM-aligned. Don't assume the Gate curve is time-accurate against the sample.
+- **An AHDSR's overlay x-axis is schematic, not PCM-aligned** — it does NOT line up with the waveform under it; only a sustain-less AHD's x-axis is wall-clock/PCM-aligned. Don't assume a gated envelope's curve is time-accurate against the sample.
-- **Trigger's fade fields require a non-trivial converter, not a field copy.** `TriggerParams` (engine) stores fades as source *frames*; `AmpEnvelope` (the overlay's view struct) stores them as *fractions* of the played span. A converter is owed on both the pack (draw) and unpack (commit) directions — `trigger_seam` owns this formula; do not copy the fields directly.
+- **An AHD's Hold is a FRACTION of what attack and decay left, never a time.** That is the whole reason A+H+D ≤ span holds by construction; adding a clamp on the sum, or re-expressing Hold as a duration, reintroduces the overflow the fraction exists to prevent.
 - **`param_slider`'s linear slider rows are retired on the parameter surface** — per root `CLAUDE.md`'s FB2 note, the `Knob` primitive (the knob-deck grammar) is now the only live consumer of that half of `param_slider`. Don't assume `param_slider`'s SLIDER row type is still drawn.
 - **The engine's per-sample path is inline ON PURPOSE.** `Voice::advanceFrame` and the three evaluators in `envelopes.h` live in headers so `VoiceEngine::render`'s inner loop — in another TU, with no LTO configured — still inlines the whole stack. Moving either out of line, or giving the evaluators a virtual `tick()`, puts a call on the hottest loop in the program.
 - **The band-stack allocator is the ONLY vertical-inventory owner.** A band's interior module (`sample_chrome`, `knob_deck`, the waveform painters) lays out inside the rect it is handed. A band owner that re-derives its own top/bottom has forked the stack.

src/core/instrument/engine/CMakeLists.txt

@@ -40,3 +40,7 @@ reasampler_test(sampler_filter LINK sampler_core)
 # Live delivery is the third integration seam over the same engine: what a published block
 # does to a voice that is already sounding, and what it must leave alone.
 reasampler_test(live_delivery LINK sampler_core)
+
+# The staged-envelope system across the same engine: per-segment curves, the sustain-less AHD
+# both mode shapes share, and the Trigger tail's terminal behaviour.
+reasampler_test(staged_envelopes LINK sampler_core)

src/core/instrument/engine/envelopes.h

@@ -1,6 +1,6 @@
 #pragma once
-// envelopes.h — the three per-frame envelope evaluators (AHDSR amplitude, Trigger fade
+// envelopes.h — the three per-frame envelope evaluators (AHDSR amplitude, sustain-less AHD,
-// shape, AD pitch offset). Concrete classes, every body defined in-class: these are called
+// AHD pitch offset). Concrete classes, every body defined in-class: these are called
 // per-voice-per-sample from Voice::advanceFrame, so they must inline into the render loop.
 // NEVER give them a common base or a virtual tick() — that vtable lands on the hottest
 // inner loop in the program (root CLAUDE.md, structural heuristic 3).
@@ -9,9 +9,62 @@
 #include <cstdint>
 
 #include "core/instrument/engine/play_params.h"
+#include "core/util/curve_law.h"
 
 namespace reasampler {
 
+using util::curveMap;
+
+// The A/H/D split of a bounded span, in frames.
+struct AhdSpan {
+    std::int64_t attack = 0;
+    std::int64_t hold   = 0;
+    std::int64_t decay  = 0;
+    std::int64_t total  = 0;  // attack + hold + decay; <= span by construction
+};
+
+// THE span split, shared by every sustain-less envelope so they cannot disagree about where a
+// stage boundary is. Attack takes at most the whole span and Decay at most what Attack left,
+// so `remaining` is non-negative without a clamp; Hold then takes its FRACTION of that
+// remainder, which is why total <= span holds for every (attack, decay, fraction) triple and
+// there is no sum to clamp. The two per-stage mins reproduce the retired Trigger fade clamp
+// exactly (head first, tail into what is left), so a migrated instance keeps its stage lengths.
+inline AhdSpan fitAhd(std::int64_t spanFrames, const AhdParams& p) {
+    AhdSpan out;
+    const std::int64_t span = spanFrames > 0 ? spanFrames : 0;
+    std::int64_t a = p.attackFrames > 0 ? p.attackFrames : 0;
+    if (a > span) a = span;
+    std::int64_t d = p.decayFrames > 0 ? p.decayFrames : 0;
+    if (d > span - a) d = span - a;
+    const std::int64_t remaining = span - a - d;
+    double frac = p.holdFraction;
+    if (!(frac > 0.0)) frac = 0.0;  // also catches NaN
+    if (frac > 1.0) frac = 1.0;
+    out.attack = a;
+    out.decay = d;
+    out.hold = static_cast<std::int64_t>(static_cast<double>(remaining) * frac + 0.5);
+    out.total = out.attack + out.hold + out.decay;
+    return out;
+}
+
+// The AHD's normalized level at `offset` frames into the span: 0 -> 1 over attack, flat 1
+// across hold, 1 -> 0 over decay, 0 outside. Pure over the offset so both the ticking pitch
+// envelope and the positional amplitude one read one shape.
+inline double ahdLevelAt(double offset, const AhdSpan& s, double attackCurve,
+                         double decayCurve) {
+    if (offset < 0.0 || offset >= static_cast<double>(s.total)) return 0.0;
+    if (s.attack > 0 && offset < static_cast<double>(s.attack)) {
+        return curveMap(offset / static_cast<double>(s.attack), attackCurve);
+    }
+    const double decayStart = static_cast<double>(s.total - s.decay);
+    if (s.decay > 0 && offset >= decayStart) {
+        double t = (offset - decayStart) / static_cast<double>(s.decay);
+        if (t > 1.0) t = 1.0;
+        return 1.0 - curveMap(t, decayCurve);
+    }
+    return 1.0;
+}
+
 // Absorbs a step a live parameter move would otherwise put straight into an evaluator's
 // output, as an offset that decays to EXACTLY zero — so the at-rest path carries no residue
 // and the smoother's own branch stays predictably false. Per-frame decay rather than a
@@ -152,8 +205,9 @@ private:
         switch (stage_) {
             case Stage::Attack: {
                 if (params.attackFrames <= 0) return 1.0;
-                const double l = stagePos_ / static_cast<double>(params.attackFrames);
+                double l = stagePos_ / static_cast<double>(params.attackFrames);
-                return l > 1.0 ? 1.0 : l;
+                if (l > 1.0) l = 1.0;
+                return curveMap(l, params.attackCurve);
             }
             case Stage::Hold:
                 // A zero-length hold falls straight through to Decay on the next tick, whose
@@ -162,16 +216,17 @@ private:
                 return (params.decayFrames <= 0) ? params.sustainLevel : 1.0;
             case Stage::Decay: {
                 if (params.decayFrames <= 0) return params.sustainLevel;
-                const double t = stagePos_ / static_cast<double>(params.decayFrames);
+                double t = stagePos_ / static_cast<double>(params.decayFrames);
-                return 1.0 + (params.sustainLevel - 1.0) * t;
+                if (t > 1.0) t = 1.0;  // never bites on the un-edited path (transitions at >=)
+                return 1.0 + (params.sustainLevel - 1.0) * curveMap(t, params.decayCurve);
             }
             case Stage::Sustain:
                 return params.sustainLevel;
             case Stage::Release: {
                 if (params.releaseFrames <= 0) return 0.0;
-                const double t = stagePos_ / static_cast<double>(params.releaseFrames);
+                double t = stagePos_ / static_cast<double>(params.releaseFrames);
-                const double l = releaseFrom_ * (1.0 - t);
+                if (t > 1.0) t = 1.0;
-                return l < 0.0 ? 0.0 : l;
+                return releaseFrom_ * (1.0 - curveMap(t, params.releaseCurve));
             }
             default:
                 return 0.0;
@@ -276,145 +331,146 @@ private:
     StepSmoother smooth_;
 };
 
-// A stateless-shape amplitude function over the play span, evaluated at a source-frame
-// offset into the span (not output frames): under Varispeed a transposed voice consumes
-// source faster than output, so driving the fades off the read position keeps fade-in/out
-// anchored to the same source frames regardless of engine. Distinct from AHDSR —
-// time-boxed by the play length and note-off-immune.
-class TriggerEnvelope {
-public:
-    // `playLengthFrames` is (playEnd - startFrame). Fades are clamped so
-    // fadeIn + fadeOut <= playLength (fadeOut anchored to the end). A zero/negative play
-    // length finishes immediately.
-    void configure(std::int64_t playLengthFrames, std::int64_t fadeInFrames,
-                   std::int64_t fadeOutFrames, FadeCurve curve = kDefaultFadeCurve) {
-        playLength_ = playLengthFrames > 0 ? playLengthFrames : 0;
-        curve_ = curve;
-        finished_ = (playLength_ <= 0);
 
-        // Clamp the fades so fadeIn + fadeOut <= playLength (fade-out anchored to the end).
+// The sustain-less AHD amplitude shape, evaluated at a source-frame offset into the span
-        // A negative fade is treated as 0. When both fades together exceed the play length,
+// rather than by ticking output frames: under Varispeed a transposed voice consumes source
-        // shrink the fade-out first (the head fade-in is the more perceptually load-bearing
+// faster than output, so driving the shape off the read position keeps every stage boundary on
-        // onset ramp), then the fade-in — never letting either go negative or the sum exceed
+// the same source frames regardless of engine. Note-off-immune and time-boxed by the span.
-        // the span.
+//
-        std::int64_t fi = fadeInFrames > 0 ? fadeInFrames : 0;
+// Positional means there is no phase counter to hold across a live edit, so the phi rule
-        std::int64_t fo = fadeOutFrames > 0 ? fadeOutFrames : 0;
+// AdsrEnvelope applies has nothing to act on here; a live reshape is a level step, absorbed by
-        if (fi > playLength_) fi = playLength_;
+// the same bounded smoother.
-        if (fi + fo > playLength_) fo = playLength_ - fi;  // fo >= 0 since fi <= playLength_
+class AhdEnvelope {
-        fadeIn_ = fi;
+public:
-        fadeOut_ = fo;
+    // `spanFrames` is the bound the stages are fitted into — (playEnd - startFrame) for the
+    // Trigger amp and filter envelopes. A zero/negative span finishes immediately.
+    void configure(std::int64_t spanFrames, const AhdParams& params) {
+        span_ = spanFrames > 0 ? spanFrames : 0;
+        fit(params);
+        smooth_.clear();
     }
 
-    // Amplitude in [0,1] at `sourceOffset` = (readPos - startFrame). Latches finished() at
+    // Peer of AdsrEnvelope::snapLive: a voice that has rendered nothing takes the new shape
-    // or past playLength. Pure over the offset so it composes with either pitch engine's
+    // outright, with no step to absorb.
-    // read rate.
+    void snapLive(const AhdParams& params) {
+        fit(params);
+        smooth_.clear();
+    }
+
+    // Live delivery to a sounding voice at its current `sourceOffset`. See the class note for
+    // why this smooths rather than holding a normalized position.
+    void applyLive(double sourceOffset, const AhdParams& params) {
+        const double before = ahdLevelAt(sourceOffset, fit_, attackCurve_, decayCurve_);
+        fit(params);
+        const double after = ahdLevelAt(sourceOffset, fit_, attackCurve_, decayCurve_);
+        if (after != before) smooth_.absorb(before - after);
+    }
+
+    // Amplitude at `sourceOffset` = (readPos - startFrame). Latches finished() at or past the
+    // fitted total, which is what frees the voice.
     double amplitudeAt(double sourceOffset) {
-        if (finished_ || sourceOffset < 0.0 ||
+        if (finished_ || sourceOffset >= static_cast<double>(fit_.total)) {
-            sourceOffset >= static_cast<double>(playLength_)) {
+            if (sourceOffset >= static_cast<double>(fit_.total)) finished_ = true;
-            // At/past the play length the one-shot is done; the voice also frees on
-            // readPos >= playEnd.
-            if (sourceOffset >= static_cast<double>(playLength_)) finished_ = true;
             return 0.0;
         }
-
+        const double out = ahdLevelAt(sourceOffset, fit_, attackCurve_, decayCurve_);
-        // Fade-in: 0->1 over [0, fadeIn_). Fade-out: 1->0 over
+        return smooth_.active() ? out + smooth_.advance() : out;
-        // [playLength_-fadeOut_, playLength_). Unity between. The two ramps never overlap
-        // (configure clamps fadeIn_ + fadeOut_ <= length). The offset is fractional (the read
-        // head is fractional under repitch), so the ramps are smooth rather than stepped.
-        double amp = 1.0;
-        const double foStart = static_cast<double>(playLength_ - fadeOut_);
-        if (fadeIn_ > 0 && sourceOffset < static_cast<double>(fadeIn_)) {
-            const double phase = sourceOffset / static_cast<double>(fadeIn_);  // 0..1
-            amp = (curve_ == FadeCurve::EqualPower)
-                      ? std::sin(phase * 1.5707963267948966)  // sin(phase*pi/2): constant power
-                      : phase;
-        } else if (fadeOut_ > 0 && sourceOffset >= foStart) {
-            const double phase = (sourceOffset - foStart) / static_cast<double>(fadeOut_);
-            amp = (curve_ == FadeCurve::EqualPower)
-                      ? std::cos(phase * 1.5707963267948966)  // cos(phase*pi/2): constant power
-                      : (1.0 - phase);
-        }
-        return amp;
     }
 
     bool finished() const { return finished_; }
+    const AhdSpan& stages() const { return fit_; }
 
 private:
-    std::int64_t playLength_ = 0;
+    void fit(const AhdParams& p) {
-    std::int64_t fadeIn_ = 0;
+        fit_ = fitAhd(span_, p);
-    std::int64_t fadeOut_ = 0;
+        attackCurve_ = p.attackCurve;
-    FadeCurve curve_ = kDefaultFadeCurve;
+        decayCurve_ = p.decayCurve;
-    bool finished_ = false;
+        finished_ = (fit_.total <= 0);
+    }
+
+    std::int64_t span_ = 0;
+    AhdSpan fit_;
+    double attackCurve_ = util::kCurveNeutral;
+    double decayCurve_ = util::kCurveNeutral;
+    bool finished_ = true;
+    StepSmoother smooth_;
 };
 
-// tick() returns the current pitch offset in semitones (0 when disabled or past
+// tick() returns the current pitch offset in semitones (0 when disabled or past the AHD),
-// attack+decay), advancing one frame. The voice converts it to a ratio multiply
+// advancing one frame. The voice converts it to a ratio multiply (Varispeed) or a shift-amount
-// (Varispeed) or a shift-amount add (Preserve).
+// add (Preserve). Unlike the amplitude AHD this owns its own position counter — pitch-envelope
+// time is wall-clock output frames — so the mid-stage rule applies in full.
 class PitchEnvelope {
 public:
-    void configure(const PitchEnvParams& params) { params_ = params; pos_ = 0.0; }
+    // `spanFrames` is the playable span the Hold fraction is taken against.
+    void configure(std::int64_t spanFrames, const PitchEnvParams& params) {
+        span_ = spanFrames > 0 ? spanFrames : 0;
+        params_ = params;
+        fit_ = fitAhd(span_, params.shape);
+        pos_ = 0.0;
+    }
     void noteOn() { pos_ = 0.0; smooth_.clear(); }
 
     // Peer of AdsrEnvelope::snapLive (see it for why the two paths cannot share code): a voice
-    // that has rendered nothing takes the new times and depth outright.
+    // that has rendered nothing takes the new shape and depth outright. `enabled` is a discrete
-    void snapLive(std::int64_t attackFrames, std::int64_t decayFrames, double peakSemitones) {
+    // toggle travelling by reload, so the caller's copy of it is deliberately ignored.
-        params_.attackFrames = attackFrames;
+    void snapLive(const PitchEnvParams& params) {
-        params_.decayFrames = decayFrames;
+        params_.peakSemitones = params.peakSemitones;
-        params_.peakSemitones = peakSemitones;
+        params_.shape = params.shape;
+        fit_ = fitAhd(span_, params_.shape);
         smooth_.clear();
     }
 
     // Live parameter delivery, same rule as AdsrEnvelope::applyLive: hold the normalized
     // position within whichever leg the envelope is in, and absorb the depth step (peak is a
-    // level, not a duration). `enabled` is a discrete toggle and travels by reload, so it is
+    // level, not a duration).
-    // deliberately not a parameter here.
+    void applyLive(const PitchEnvParams& params) {
-    void applyLive(std::int64_t attackFrames, std::int64_t decayFrames,
+        const double before = offsetAt();
-                   double peakSemitones) {
+        const AhdSpan next = fitAhd(span_, params.shape);
-        const double before = offsetAt(params_);
+        pos_ = holdPhase(fit_, next);
-        const double a = params_.attackFrames > 0 ? static_cast<double>(params_.attackFrames) : 0.0;
+        params_.peakSemitones = params.peakSemitones;
-        const double d = params_.decayFrames > 0 ? static_cast<double>(params_.decayFrames) : 0.0;
+        params_.shape = params.shape;
-        const double na = attackFrames > 0 ? static_cast<double>(attackFrames) : 0.0;
+        fit_ = next;
-        const double nd = decayFrames > 0 ? static_cast<double>(decayFrames) : 0.0;
+        const double after = offsetAt();
-        if (pos_ < a) {
-            pos_ = (na > 0.0) ? pos_ * (na / a) : na;
-        } else if (pos_ < a + d) {
-            pos_ = (nd > 0.0) ? na + (pos_ - a) * (nd / d) : na + nd;
-        } else {
-            pos_ = na + nd;  // already past the envelope: stay past it under the new times
-        }
-        params_.attackFrames = attackFrames;
-        params_.decayFrames = decayFrames;
-        params_.peakSemitones = peakSemitones;
-        const double after = offsetAt(params_);
         if (after != before) smooth_.absorb(before - after);
     }
 
     double tick() {
         if (!params_.enabled) return 0.0;
-        const double offset = offsetAt(params_);
+        const double offset = offsetAt();
         pos_ += 1.0;
         return smooth_.active() ? offset + smooth_.advance() : offset;
     }
 
 private:
-    // The semitone offset at the current position under `params` — the shared evaluator for
+    // The semitone offset at the current position — the shared evaluator for both tick() and
-    // both tick() and applyLive's before/after comparison.
+    // applyLive's before/after comparison.
-    double offsetAt(const PitchEnvParams& params) const {
+    double offsetAt() const {
-        if (!params.enabled) return 0.0;
+        if (!params_.enabled) return 0.0;
-        const double a = params.attackFrames > 0 ? static_cast<double>(params.attackFrames) : 0.0;
+        return params_.peakSemitones *
-        const double d = params.decayFrames > 0 ? static_cast<double>(params.decayFrames) : 0.0;
+               ahdLevelAt(pos_, fit_, params_.shape.attackCurve, params_.shape.decayCurve);
-        if (pos_ < a) {
-            // Attack: 0 -> peak over attackFrames (rise into the peak).
-            return params.peakSemitones * (pos_ / a);
     }
-        if (pos_ < a + d) {
+
-            // Decay: peak -> 0 over decayFrames (settle to base pitch).
+    // The position under `next` holding the normalized position within whichever leg pos_ is
-            return params.peakSemitones * (1.0 - (pos_ - a) / d);
+    // in. A leg dialled to zero completes: the position lands on that leg's new end.
+    double holdPhase(const AhdSpan& old, const AhdSpan& next) const {
+        const double oa = static_cast<double>(old.attack);
+        const double oh = static_cast<double>(old.hold);
+        const double od = static_cast<double>(old.decay);
+        const double na = static_cast<double>(next.attack);
+        const double nh = static_cast<double>(next.hold);
+        const double nd = static_cast<double>(next.decay);
+        if (pos_ < oa) return (na > 0.0) ? pos_ * (na / oa) : na;
+        if (pos_ < oa + oh) return (nh > 0.0) ? na + (pos_ - oa) * (nh / oh) : na + nh;
+        if (pos_ < oa + oh + od) {
+            return (nd > 0.0) ? na + nh + (pos_ - oa - oh) * (nd / od) : na + nh + nd;
         }
-        return 0.0;  // past attack+decay: at base pitch forever.
+        return na + nh + nd;  // already past the envelope: stay past it under the new shape
     }
 
     PitchEnvParams params_;
+    std::int64_t span_ = 0;
+    AhdSpan fit_;
     double pos_ = 0.0;
     StepSmoother smooth_;
 };

src/core/instrument/engine/live_params.cpp

@@ -11,10 +11,10 @@ LiveValues foldLive(const PlayParams& params) {
     v.filterModAmount = params.filter.modAmount;
     v.filterKeyTrack = params.filter.keyTrack;
     v.filterEnv = params.filter.env;
+    v.filterAhd = params.filter.trigEnv;
     v.adsr = params.adsr;
-    v.pitchEnvAttackFrames = params.pitchEnv.attackFrames;
+    v.ampAhd = params.trigAhd;
-    v.pitchEnvDecayFrames = params.pitchEnv.decayFrames;
+    v.pitchEnv = params.pitchEnv;
-    v.pitchEnvPeakSemitones = params.pitchEnv.peakSemitones;
     return v;
 }
 

src/core/instrument/engine/live_params.h

@@ -27,15 +27,19 @@ inline constexpr double kLiveRampSeconds = 0.020;
 // morphLaw rides inside filterSettings only because it is cheaper to carry the whole struct to
 // the filter's prepare() than to splice it back; it changes only across a reload, which
 // republishes this block, so the two can never disagree.
+// Each envelope carries BOTH mode shapes: which one a voice applies is fixed at note-on by
+// its play mode, so publishing both keeps the block one shape regardless of mode. The pitch
+// envelope's `enabled` rides along inside its params only because the struct is carried whole;
+// PitchEnvelope ignores it, since a toggle travels by reload.
 struct LiveValues {
     filter::FilterSettings filterSettings{};
     double       filterModAmount = 0.0;
     double       filterKeyTrack = 0.0;
     AdsrParams   filterEnv{};
+    AhdParams    filterAhd{};
     AdsrParams   adsr{};
-    std::int64_t pitchEnvAttackFrames = 0;
+    AhdParams    ampAhd{};
-    std::int64_t pitchEnvDecayFrames = 0;
+    PitchEnvParams pitchEnv{};
-    double       pitchEnvPeakSemitones = 0.0;
 };
 
 // The seqlock copies the block as raw bytes, which is only defensible for a plain value type.

src/core/instrument/engine/play_params.h

@@ -11,6 +11,7 @@
 #include "core/audio/peaks.h"
 #include "core/instrument/engine/filter/voice_filter.h"
 #include "core/instrument/engine/velocity_curve.h"
+#include "core/util/curve_law.h"  // the per-segment curve exponent domain + its neutral
 
 namespace reasampler {
 
@@ -39,34 +40,44 @@ inline constexpr int kMaxVoiceCount = 32;
 inline constexpr int kDefaultVoiceCount = 16;
 
 // AHDSR amplitude envelope. holdFrames == 0 is exactly the pre-hold-stage ADSR (back-compat).
+// The three curve exponents shape the SLOPED stages only — Hold and Sustain are flat by
+// definition and carry none. `curve_law.h` owns what an exponent means.
 struct AdsrParams {
     std::int64_t attackFrames  = 0;
     std::int64_t holdFrames    = 0;
     std::int64_t decayFrames   = 0;
     double       sustainLevel  = 1.0;   // 0..1
     std::int64_t releaseFrames = 0;
+    double       attackCurve   = util::kCurveNeutral;
+    double       decayCurve    = util::kCurveNeutral;
+    double       releaseCurve  = util::kCurveNeutral;
+};
+
+// Attack -> Hold -> Decay over a bounded span: the shape every SUSTAIN-LESS envelope takes
+// (the Trigger amp, the Trigger filter envelope, the pitch envelope). Hold is a FRACTION of
+// the span left after attack and decay, never a time of its own — that is what makes
+// A + H + D <= span structural rather than clamped (see fitAhd in envelopes.h).
+struct AhdParams {
+    std::int64_t attackFrames = 0;
+    std::int64_t decayFrames  = 0;
+    double       holdFraction = 1.0;   // 0..1 of the span remaining after attack + decay
+    double       attackCurve  = util::kCurveNeutral;
+    double       decayCurve   = util::kCurveNeutral;
 };
 
 // GATE = classic held note (AHDSR + sustain loop + note-off release). TRIGGER = one-shot:
-// note-off-immune, no sustain loop, plays a % of sample length shaped by fade-in/out. Both
+// note-off-immune, no sustain loop, plays a % of sample length shaped by the AHD. Both honor
-// honor the start point. Default Gate so an instrument with no params set plays as before.
+// the start point. Default Gate so an instrument with no params set plays as before.
 enum class PlayMode { Gate, Trigger };
 
-// Playback covers [startFrame, playEnd), playEnd = startFrame +
+// Trigger's play SPAN: [startFrame, playEnd), playEnd = startFrame +
-// round(lengthFraction*(frames - startFrame)). Amplitude ramps 0->1 over fadeInFrames at the
+// round(lengthFraction*(frames - startFrame)). The voice frees when the head reaches playEnd.
-// head and 1->0 over fadeOutFrames anchored to playEnd; unity between. Fades clamp so
+// The amplitude SHAPE over that span is PlayParams::trigAhd — the fade-in/fade-out pair that
-// fadeIn + fadeOut <= play length. The voice frees when the head reaches playEnd.
+// used to live here is retired; do not reintroduce a second amplitude mechanism.
 struct TriggerParams {
     double lengthFraction = 1.0;  // (0,1] of the post-start span to play
-    std::int64_t fadeInFrames   = 0;
-    std::int64_t fadeOutFrames  = 0;
 };
 
-// EQUAL_POWER (constant-power sin/cos) is the click-free default for Trigger's ramps; LINEAR is
-// the build-time residual.
-enum class FadeCurve { EqualPower, Linear };
-inline constexpr FadeCurve kDefaultFadeCurve = FadeCurve::EqualPower;
-
 // VARISPEED: readPos_ += ratio_, pitch and duration coupled (an octave up plays half as long).
 // PRESERVE: the read advances at the source rate while a PitchShifter transposes the output
 // (an octave up keeps its length).
@@ -83,14 +94,15 @@ inline constexpr PitchEngine kDefaultPitchEngine = PitchEngine::Preserve;
 // of real source, so output frame 0 is source frame 0 regardless of window size.
 inline constexpr double kPreserveWindowMs = 50.0;
 
-// AD pitch-modulation envelope, off by default (enabled=false -> offset always 0 -> bit-identical
+// AHD pitch-modulation envelope, off by default (enabled=false -> offset always 0 ->
-// to the un-modulated engine). At note-on the offset rises to peakSemitones over attackFrames,
+// bit-identical to the un-modulated engine). At note-on the offset rises to peakSemitones over
-// then falls to 0 over decayFrames; a zero attack gives a pure percussive pitch drop.
+// attack, holds there, then falls to 0 over decay; a zero attack gives a pure percussive pitch
+// drop. The hold fraction defaults to 0 so an instance predating the stage plays exactly as its
+// attack-decay predecessor did.
 struct PitchEnvParams {
     bool      enabled       = false;
-    std::int64_t attackFrames  = 0;
-    std::int64_t decayFrames   = 0;
     double    peakSemitones = 0.0;  // signed depth at the peak
+    AhdParams shape{0, 0, /*holdFraction=*/0.0, util::kCurveNeutral, util::kCurveNeutral};
 };
 
 // Per-voice resonant filter, off by default (enabled=false -> the render path skips it
@@ -106,7 +118,11 @@ struct FilterParams {
     double modAmount = 0.0;   // bipolar [-1,+1], envelope -> cutoff
     double velAmount = 0.0;   // bipolar [-1,+1], velocity -> cutoff
     double keyTrack  = 0.0;   // octaves of cutoff per octave of (note - root)
-    AdsrParams env;           // the same staged AHDSR the amp runs; frames
+    // The filter envelope takes the same shape the amp does under the active play mode:
+    // AHDSR in Gate, AHD in Trigger. Both are stored, so a mode flip cannot lose either
+    // mode's dialled values (see core/instrument/CLAUDE.md).
+    AdsrParams env;           // Gate: the same staged AHDSR the amp runs; frames
+    AhdParams  trigEnv;       // Trigger: the same staged AHD the amp runs; frames
     // Shapes velocity before velAmount scales it. Linear rather than the amp's flat() default
     // because a flat curve under a depth control would make every velocity the same offset;
     // the no-op at rest is velAmount == 0, not the curve. NOTE: this default only governs a
@@ -121,8 +137,9 @@ struct FilterParams {
 // Preserve product default is layered on at (de)serialization, see kDefaultPitchEngine.
 struct PlayParams {
     PlayMode       playMode = PlayMode::Gate;
-    AdsrParams     adsr;
+    AdsrParams     adsr;      // Gate amp
-    TriggerParams  trigger;
+    TriggerParams  trigger;   // Trigger play span
+    AhdParams      trigAhd;   // Trigger amp
     PitchEngine    pitchEngine = PitchEngine::Varispeed;
     PitchEnvParams pitchEnv;
     FilterParams   filter;

src/core/instrument/engine/voice.cpp

@@ -64,11 +64,12 @@ void Voice::start(int note, int velocity, const SampleData& sample, bool declick
     std::int64_t start = sample.startFrame;
     if (start < 0 || start >= frameCount) start = 0;
     readPos_ = static_cast<double>(start);
-    startFrame_ = start;  // Trigger fade offset origin (readPos - startFrame = span offset)
+    startFrame_ = start;  // the span-offset origin: readPos - startFrame
 
     // Amplitude envelope: Gate = AHDSR (all five fields read from play.adsr, resolved to
-    // frames from stored seconds at load time); Trigger = the time-boxed fade-in/out over the
+    // frames from stored seconds at load time); Trigger = the staged AHD over the % play span.
-    // % play length.
+    const std::int64_t postStart = frameCount - start;  // >= 1 (start clamped < frameCount)
+    std::int64_t trigSpan = 0;
     if (playMode_ == PlayMode::Gate) {
         env_.configure(p.adsr);
         env_.noteOn();
@@ -79,17 +80,18 @@ void Voice::start(int note, int velocity, const SampleData& sample, bool declick
         double frac = p.trigger.lengthFraction;
         if (frac <= 0.0) frac = 0.0;      // %=0 -> zero play length (finishes immediately)
         if (frac > 1.0) frac = 1.0;
-        const std::int64_t span = frameCount - start;  // >= 1 (start clamped < frameCount)
         std::int64_t playLen = static_cast<std::int64_t>(
-            static_cast<double>(span) * frac + 0.5);  // round
+            static_cast<double>(postStart) * frac + 0.5);  // round
         if (playLen < 0) playLen = 0;
-        if (playLen > span) playLen = span;
+        if (playLen > postStart) playLen = postStart;
         playEnd_ = start + playLen;
-        trigEnv_.configure(playLen, p.trigger.fadeInFrames, p.trigger.fadeOutFrames,
+        trigSpan = playLen;
-                           kDefaultFadeCurve);
+        ampAhd_.configure(playLen, p.trigAhd);
     }
 
-    pitchEnv_.configure(p.pitchEnv);
+    // The pitch AHD's Hold fraction is taken against the whole playable span, so its three
+    // stages lay 1:1 over the waveform from the start point.
+    pitchEnv_.configure(postStart, p.pitchEnv);
     pitchEnv_.noteOn();
 
     // A restart lands every live glide back on the new note's own values, at a step derived
@@ -119,8 +121,12 @@ void Voice::start(int note, int velocity, const SampleData& sample, bool declick
         rResonance_.set(static_cast<double>(p.filter.settings.resonanceNorm));
         rMorph_.set(static_cast<double>(p.filter.settings.morphNorm));
         rDrive_.set(static_cast<double>(p.filter.settings.driveNorm));
+        if (playMode_ == PlayMode::Gate) {
             filterEnv_.configure(p.filter.env);
             filterEnv_.noteOn();
+        } else {
+            filterAhd_.configure(trigSpan, p.filter.trigEnv);
+        }
         filter_.reset();
         updateFilterCutoffBase(note);
         // The note's ONE full solve — Q, morph and drive are constants for its lifetime unless
@@ -196,25 +202,31 @@ void Voice::start(int note, int velocity, const SampleData& sample, bool declick
 }
 
 void Voice::applyLive(const instrument::engine::LiveValues& live, bool snap) {
-    // Gate's amplitude envelope is the AHDSR; Trigger's fade shape is anchored to a play span
+    // Each envelope applies only the shape its play mode selected at note-on; the block
-    // resolved at note-on and travels by reload instead (deck_groups.h names why).
+    // carries both so the mode never changes what is published.
     //
     // A fresh note and a sounding one take DIFFERENT envelope entry points, never one with a
     // flag: a voice that has rendered nothing has no phase to hold and nothing to be
     // continuous with, and the mid-stage rule misreads its stage-0 position (envelopes.h).
+    const bool gate = (playMode_ == PlayMode::Gate);
     if (snap) {
-        if (playMode_ == PlayMode::Gate) env_.snapLive(live.adsr);
+        if (gate) env_.snapLive(live.adsr);
-        pitchEnv_.snapLive(live.pitchEnvAttackFrames, live.pitchEnvDecayFrames,
+        else ampAhd_.snapLive(live.ampAhd);
-                           live.pitchEnvPeakSemitones);
+        pitchEnv_.snapLive(live.pitchEnv);
     } else {
-        if (playMode_ == PlayMode::Gate) env_.applyLive(live.adsr);
+        if (gate) env_.applyLive(live.adsr);
-        pitchEnv_.applyLive(live.pitchEnvAttackFrames, live.pitchEnvDecayFrames,
+        else ampAhd_.applyLive(sourceOffset(), live.ampAhd);
-                            live.pitchEnvPeakSemitones);
+        pitchEnv_.applyLive(live.pitchEnv);
     }
     if (!filterOn_) return;  // filter enable is a discrete toggle: it travels by reload
 
-    if (snap) filterEnv_.snapLive(live.filterEnv);
+    if (snap) {
-    else filterEnv_.applyLive(live.filterEnv);
+        if (gate) filterEnv_.snapLive(live.filterEnv);
+        else filterAhd_.snapLive(live.filterAhd);
+    } else {
+        if (gate) filterEnv_.applyLive(live.filterEnv);
+        else filterAhd_.applyLive(sourceOffset(), live.filterAhd);
+    }
     filterCutoffNorm_ = static_cast<double>(live.filterSettings.cutoffNorm);
     filterKeyTrack_ = live.filterKeyTrack;
     filterSettings_.morphLaw = live.filterSettings.morphLaw;

src/core/instrument/engine/voice.h

@@ -60,7 +60,7 @@ inline double filterNormPerOctave() {
 // kDeclickDecay/frame — so the boundary frame reproduces the old level exactly regardless of
 // the new envelope's first value, and the residue fades to the -80 dB floor in a few ms.
 // An earlier revision gated the compensation by (1 - newAmp): any restart whose new
-// amplitude was instantly ~1 (Trigger with no fade-in, zero-attack Gate) got zero
+// amplitude was instantly ~1 (a zero-attack Trigger or Gate) got zero
 // compensation and kept the full click — the difference-seed has no such hole. Off by
 // default so the bare core stays byte-identical to the pre-fix engine; the processor
 // shell opts in.
@@ -162,25 +162,26 @@ private:
     }
 
     // This frame's amplitude in [0,1] from the active envelope. Gate: AHDSR ticks once per
-    // output frame (envelope time is wall-clock, independent of read rate). Trigger: fade
+    // output frame (envelope time is wall-clock, independent of read rate). Trigger: the AHD
-    // shape is evaluated at the source offset (readPos - startFrame) so fades anchor to
+    // is evaluated at the source offset (readPos - startFrame) so its stages anchor to source
-    // source frames regardless of pitch engine. Sets amplitudeDone_ on finish so
+    // frames regardless of pitch engine. Sets amplitudeDone_ on finish so advanceFrame frees
-    // advanceFrame frees the voice.
+    // the voice.
     double tickAmplitude() {
         double amp;
         if (playMode_ == PlayMode::Gate) {
             amp = env_.tick();
             if (env_.finished()) amplitudeDone_ = true;
         } else {
-            // Anchored to the source offset so fades land on the same source frames under
+            amp = ampAhd_.amplitudeAt(sourceOffset());
-            // either engine's read rate. The voice also frees on readPos_ >= playEnd_ in
+            if (ampAhd_.finished()) amplitudeDone_ = true;
-            // advanceFrame; finished() here is the belt to that suspenders.
-            amp = trigEnv_.amplitudeAt(readPos_ - static_cast<double>(startFrame_));
-            if (trigEnv_.finished()) amplitudeDone_ = true;
         }
         return amp;
     }
 
+    // Frames into the Trigger play span at the current read head — the domain both
+    // sustain-less envelopes are evaluated over.
+    double sourceOffset() const { return readPos_ - static_cast<double>(startFrame_); }
+
     // Advances the filter envelope and re-solves the corner from the modulated cutoff. The
     // solve is UNQUANTIZED: the corner tracks the envelope continuously, so a sweep glides
     // rather than staircasing. State preservation across the solve is voice_filter's own
@@ -195,8 +196,13 @@ private:
     // through both so a moved base always re-solves.
     void tickFilterCutoff() {
         if (filterModAmount_ == 0.0 && filterSolved_) return;
-        double cut = static_cast<double>(filterBaseCutoff_) +
+        // The filter envelope takes the amp's shape under the active mode — AHDSR in Gate,
-                     filterModAmount_ * filterEnv_.tick();
+        // the source-offset AHD in Trigger. playMode_ is fixed for the note's lifetime, so the
+        // branch is perfectly predicted.
+        const double envOut = (playMode_ == PlayMode::Gate)
+                                  ? filterEnv_.tick()
+                                  : filterAhd_.amplitudeAt(sourceOffset());
+        double cut = static_cast<double>(filterBaseCutoff_) + filterModAmount_ * envOut;
         if (cut < 0.0) cut = 0.0;
         if (cut > 1.0) cut = 1.0;
         const float cutNorm = static_cast<float>(cut);
@@ -284,6 +290,22 @@ private:
                           declickRefR_ > kDeclickFloor || declickRefR_ < -kDeclickFloor);
     }
 
+    // Rings the voice's last rendered output out instead of hard-cutting it when the read head
+    // reaches the end of its span, on the PRESERVE path only. Varispeed's final sample is real
+    // source content at its natural end and its stop is left byte-identical; Preserve's is
+    // recycled synthetic tail (freezeTail stops the writer a full window before the read head
+    // arrives), whose level bears no relation to the source's own ending — cutting it at
+    // whatever amplitude the splice machinery happens to be at is the end-of-sample click.
+    // Reuses the takeover blend so the boundary frame reproduces the last level exactly.
+    void seedTerminalDeclick() {
+        if (pitchEngine_ != PitchEngine::Preserve) return;
+        declickRefL_ = (lastOutL_ > 1.0) ? 1.0 : (lastOutL_ < -1.0) ? -1.0 : lastOutL_;
+        declickRefR_ = (lastOutR_ > 1.0) ? 1.0 : (lastOutR_ < -1.0) ? -1.0 : lastOutR_;
+        declickWeight_ = 1.0;
+        declickActive_ = (declickRefL_ > kDeclickFloor || declickRefL_ < -kDeclickFloor ||
+                          declickRefR_ > kDeclickFloor || declickRefR_ < -kDeclickFloor);
+    }
+
     // Shared read/advance for both render paths: computes the interpolated per-channel
     // value(s) at the current read head, ticks the amplitude + pitch envelopes once, applies
     // the pitch engine, advances the head, and latches idle on exhaustion. `stereo` selects
@@ -327,6 +349,7 @@ private:
         // byte-identical to the plain idle-out.
         if (triggerRanOff || readPos_ >= static_cast<double>(frameCount)) {
             if (declickPending_) seedDeclick();
+            if (!declickActive_) seedTerminalDeclick();
             if (declickActive_) {
                 // Bounded blend at silence: outCurrent == 0, so the blend is
                 // w*(ref − 0) == w*ref. The weight decays by kDeclickDecay each frame,
@@ -350,6 +373,15 @@ private:
 
         // Envelopes tick once per output frame. Pitch envelope biases pitch under either engine.
         const double amp = tickAmplitude();
+        // Peer of the read-head exhaustion path above: a Trigger AHD whose stages end BEFORE
+        // the play span (a zero decay, which the shape deliberately keeps expressible) cuts the
+        // same synthetic Preserve tail at whatever level it was at. Seeded from lastOut, which
+        // still holds the PREVIOUS frame — this one is already silent. Gate is left out on
+        // purpose: its amplitude reaches zero through a release, so there is no cut to ring out.
+        if (amplitudeDone_ && amp == 0.0 && !declickActive_ &&
+            playMode_ == PlayMode::Trigger) {
+            seedTerminalDeclick();
+        }
         const double gain = amp * velocityGain_;
         const double pitchEnvSemis = pitchEnv_.tick();
 
@@ -518,13 +550,13 @@ private:
     double readPos_ = 0.0;       // fractional frame index into the sample
     const SampleData* sample_ = nullptr;
 
-    // Gate uses env_ (AHDSR); Trigger uses trigEnv_ — only one active per voice (selected by
+    // Gate uses env_ (AHDSR); Trigger uses ampAhd_ — only one active per voice (selected by
     // playMode_ at start). playEnd_ is Trigger's source-frame stop (frees when
     // readPos_ >= playEnd_).
     PlayMode playMode_ = PlayMode::Gate;
     AdsrEnvelope env_;
-    TriggerEnvelope trigEnv_;
+    AhdEnvelope ampAhd_;
-    std::int64_t startFrame_ = 0;  // clamped initial read frame; Trigger fade offset origin
+    std::int64_t startFrame_ = 0;  // clamped initial read frame; the span-offset origin
     std::int64_t playEnd_ = 0;   // Trigger: source-frame end; Gate: unused
     bool amplitudeDone_ = false; // set when the active amplitude envelope finished
 
@@ -534,7 +566,8 @@ private:
     // solved once by start()'s prepare(), which is why every later re-solve is cutoff-only.
     // filterRate_ <= 0 makes prepare() bypass rather than invent a rate.
     instrument::engine::filter::VoiceFilter filter_;
-    AdsrEnvelope filterEnv_;
+    AdsrEnvelope filterEnv_;   // Gate
+    AhdEnvelope filterAhd_;    // Trigger
     bool filterOn_ = false;
     double filterRate_ = 0.0;
     double filterCutoffNorm_ = 1.0;

src/core/instrument/map/CMakeLists.txt

@@ -17,8 +17,10 @@ reasampler_test(bank_sync LINK bank_sync)
 # the voice engine: velocity_curve (the curve field) and master_gain (the wire gain cap) only.
 # play_params.h also pulls in filter/'s headers (FilterSettings, MorphLaw) for the v9 filter
 # tail -- plain value types, so no filter symbol is linked and this stays true.
+# Two TUs on the format's OWN seam: the envelope's version ladder and the payload's, which
+# the format already keeps on independent version axes (see component_state_io.h).
 reasampler_pure_library(component_state_io
-    SOURCES component_state_io.cpp
+    SOURCES component_state_io.cpp params_payload.cpp
     LINK PUBLIC velocity_curve master_gain)
 # Links only component_state_io, deliberately no sampler_core/pitch_shift: the structural
 # proof the codec is engine-free, which is what keeps engine object code out of the extension.

src/core/instrument/map/component_state_io.cpp

@@ -1,16 +1,16 @@
-// component_state_io — the ComponentState envelope + params-payload binary codec. See
+// component_state_io — the ComponentState ENVELOPE codec. See component_state_io.h for both
-// component_state_io.h for the format ladders (envelope v1..v11, params payload v1..v9).
+// format ladders (envelope v1..v11, params payload v1..v10); the payload half lives in
-// Every wire format is FROZEN — byte-identical across revisions.
+// params_payload, which grows on its own version axis. Every wire format is FROZEN —
+// byte-identical across revisions.
 
 #include "core/instrument/map/component_state_io.h"
 
-#include <algorithm>  // std::min (bounded curve-point reserve)
-#include <cassert>    // assert (v3-lift projectRate guard)
 #include <cmath>      // std::isfinite (v8 master-gain validation)
 #include <cstring>    // std::memcpy (serializeSelection)
 #include <utility>    // std::move
 
 #include "core/instrument/engine/master_gain.h"  // masterGainMaxLinear — the v8 master-gain wire cap
+#include "core/instrument/map/params_payload.h"  // the payload half of this codec
 #include "core/wire/bytes.h"  // putLE / ByteReader / doubleToBits (the ONE LE codec)
 
 namespace reasampler::instrument::map {
@@ -26,267 +26,6 @@ namespace {
 // Signed 64-bit values ride the wire as their two's-complement unsigned image.
 std::uint64_t asU64(std::int64_t v) { return static_cast<std::uint64_t>(v); }
 
-// What a payload read yields. `adoptedSampleId` is non-empty ONLY for a retired zone-list
-// payload that carried at least one zone: the first zone's capture, which supersedes the
-// envelope's selection id (see the adoption rule in the header).
-struct PayloadRead {
-    InstrumentParams params;
-    std::string adoptedSampleId;
-};
-
-// Emit the OVERRIDE trio shared by the v2..v7 per-zone record and the v8 single record, so
-// the two shapes cannot drift byte-for-byte.
-void putOverrides(std::vector<std::uint8_t>& out, const InstrumentParams& p) {
-    out.push_back(p.rootOverride ? 1 : 0);
-    if (p.rootOverride) {
-        putLE(out, static_cast<std::uint32_t>(static_cast<std::int32_t>(*p.rootOverride)));
-    }
-    out.push_back(p.loopOverride ? 1 : 0);
-    if (p.loopOverride) {
-        out.push_back(p.loopOverride->hasLoop ? 1 : 0);
-        putLE(out, asU64(p.loopOverride->start));
-        putLE(out, asU64(p.loopOverride->end));
-    }
-    out.push_back(p.startPoint ? 1 : 0);
-    if (p.startPoint) putLE(out, asU64(*p.startPoint));
-}
-
-// A velocity curve: 4-byte LE control-point count, then per point velocity + amp as doubles.
-// The amp curve (v7) and the filter's own curve (v9) share this shape.
-void putCurve(std::vector<std::uint8_t>& out, const VelocityCurve& curve) {
-    const std::vector<VelocityPoint>& pts = curve.points();
-    putLE(out, static_cast<std::uint32_t>(pts.size()));
-    for (const VelocityPoint& pt : pts) {
-        putLE(out, doubleToBits(pt.velocity));
-        putLE(out, doubleToBits(pt.amp));
-    }
-}
-
-// Append the params payload: marker + version + the single parameter record. Always emits
-// the CURRENT payload version; the marker precedes the record so any reader detects the
-// shape independent of the envelope version (see component_state_io.h).
-void putParamsPayload(std::vector<std::uint8_t>& out, const InstrumentParams& p) {
-    putLE(out, kParamsFormatMarker);
-    putLE(out, kParamsPayloadVersion);
-    putOverrides(out, p);
-
-    // Play params: wall-clock times are SECONDS (doubles); trigger %-length + fades stay
-    // source frames/fraction. Field order matches the header's v5 tail spec verbatim.
-    const PlaySeconds& pp = p.play;
-    out.push_back(pp.playMode == PlayMode::Trigger ? 1 : 0);
-    putLE(out, doubleToBits(pp.adsr.holdSeconds));            // wall-clock seconds
-    putLE(out, doubleToBits(pp.trigger.lengthFraction));      // fraction
-    putLE(out, asU64(pp.trigger.fadeInFrames));               // source frames
-    putLE(out, asU64(pp.trigger.fadeOutFrames));              // source frames
-    out.push_back(pp.pitchEngine == PitchEngine::Preserve ? 1 : 0);
-    out.push_back(pp.pitchEnv.enabled ? 1 : 0);
-    putLE(out, doubleToBits(pp.pitchEnv.attackSeconds));      // wall-clock seconds
-    putLE(out, doubleToBits(pp.pitchEnv.decaySeconds));       // wall-clock seconds
-    putLE(out, doubleToBits(pp.pitchEnv.peakSemitones));      // depth
-    // Full AHDSR A/D/S/R tail — wall-clock SECONDS (sustainLevel is a level).
-    putLE(out, doubleToBits(pp.adsr.attackSeconds));
-    putLE(out, doubleToBits(pp.adsr.decaySeconds));
-    putLE(out, doubleToBits(pp.adsr.sustainLevel));
-    putLE(out, doubleToBits(pp.adsr.releaseSeconds));
-    // Key-tracking scalar (1.0 = 100% ET).
-    putLE(out, doubleToBits(p.keyTrack));
-    // The velocity->amp transfer curve: 4-byte LE control-point count, then per point
-    // velocity + amp as doubles (endpoints included, so N >= 2).
-    putCurve(out, p.velocityCurve);
-    // v9: the per-voice filter tail. The module's floats widen to doubles on the wire so the
-    // whole payload stays one numeric shape.
-    const FilterSeconds& f = pp.filter;
-    out.push_back(f.enabled ? 1 : 0);
-    putLE(out, doubleToBits(static_cast<double>(f.settings.cutoffNorm)));
-    putLE(out, doubleToBits(static_cast<double>(f.settings.resonanceNorm)));
-    putLE(out, doubleToBits(static_cast<double>(f.settings.morphNorm)));
-    putLE(out, doubleToBits(static_cast<double>(f.settings.driveNorm)));
-    out.push_back(f.settings.morphLaw == engine::filter::MorphLaw::HighNotchLow ? 1 : 0);
-    putLE(out, doubleToBits(f.modAmount));
-    putLE(out, doubleToBits(f.velAmount));
-    putLE(out, doubleToBits(f.keyTrack));
-    putLE(out, doubleToBits(f.env.attackSeconds));
-    putLE(out, doubleToBits(f.env.holdSeconds));
-    putLE(out, doubleToBits(f.env.decaySeconds));
-    putLE(out, doubleToBits(f.env.sustainLevel));
-    putLE(out, doubleToBits(f.env.releaseSeconds));
-    putCurve(out, f.velocityCurve);
-}
-
-// Read the play tail (v5 shape onward) into `p`. Shared by the legacy zone reader and the
-// v8 single-record reader so the two can never disagree about field order.
-void readSecondsPlayTail(ByteReader& r, InstrumentParams& p) {
-    p.play.playMode = (r.u8() != 0) ? PlayMode::Trigger : PlayMode::Gate;
-    p.play.adsr.holdSeconds = bitsToDouble(r.u64());
-    p.play.trigger.lengthFraction = bitsToDouble(r.u64());
-    p.play.trigger.fadeInFrames = r.i64();
-    p.play.trigger.fadeOutFrames = r.i64();
-    p.play.pitchEngine = (r.u8() != 0) ? PitchEngine::Preserve : PitchEngine::Varispeed;
-    p.play.pitchEnv.enabled = (r.u8() != 0);
-    p.play.pitchEnv.attackSeconds = bitsToDouble(r.u64());
-    p.play.pitchEnv.decaySeconds  = bitsToDouble(r.u64());
-    p.play.pitchEnv.peakSemitones = bitsToDouble(r.u64());
-    p.play.adsr.attackSeconds  = bitsToDouble(r.u64());
-    p.play.adsr.decaySeconds   = bitsToDouble(r.u64());
-    p.play.adsr.sustainLevel   = bitsToDouble(r.u64());
-    p.play.adsr.releaseSeconds = bitsToDouble(r.u64());
-}
-
-// Read a velocity curve tail into `curve`. fromPoints repairs the X-order/endpoint invariant
-// defensively; a truncated read leaves `curve` at whatever default it came in with.
-void readCurveTail(ByteReader& r, VelocityCurve& curve) {
-    const std::uint32_t ptCount = r.u32();
-    std::vector<VelocityPoint> pts;
-    // Bound the reserve to what the blob can hold (16 bytes/point) so a corrupt huge count
-    // can't trigger a giant allocation before the bounded reads fail.
-    const std::size_t remaining = r.bytes.size() > r.pos ? r.bytes.size() - r.pos : 0;
-    pts.reserve(std::min(static_cast<std::size_t>(ptCount), remaining / 16));
-    for (std::uint32_t i = 0; i < ptCount && r.ok; ++i) {
-        const double vel = bitsToDouble(r.u64());
-        const double amp = bitsToDouble(r.u64());
-        pts.push_back(VelocityPoint{vel, amp});
-    }
-    if (r.ok) {
-        curve = reasampler::instrument::engine::VelocityCurve::fromPoints(std::move(pts));
-    }
-}
-
-// Read the v9 filter tail into `p`. A blob that stops short leaves the off/neutral default,
-// which is what makes a v8 blob play bit-identically under the new codec.
-void readFilterTail(ByteReader& r, InstrumentParams& p) {
-    FilterSeconds& f = p.play.filter;
-    f.enabled = (r.u8() != 0);
-    f.settings.cutoffNorm    = static_cast<float>(bitsToDouble(r.u64()));
-    f.settings.resonanceNorm = static_cast<float>(bitsToDouble(r.u64()));
-    f.settings.morphNorm     = static_cast<float>(bitsToDouble(r.u64()));
-    f.settings.driveNorm     = static_cast<float>(bitsToDouble(r.u64()));
-    f.settings.morphLaw = (r.u8() != 0) ? engine::filter::MorphLaw::HighNotchLow
-                                        : engine::filter::MorphLaw::HighBandLow;
-    // Same non-finite-falls-back-to-neutral guard as the v8 master gain above: these three
-    // reach Voice::tickFilterCutoff's clamp compares and a static_cast<int>, both UB on NaN.
-    double modAmount = bitsToDouble(r.u64());
-    double velAmount = bitsToDouble(r.u64());
-    double keyTrack  = bitsToDouble(r.u64());
-    f.modAmount = std::isfinite(modAmount) ? modAmount : 0.0;
-    f.velAmount = std::isfinite(velAmount) ? velAmount : 0.0;
-    f.keyTrack  = std::isfinite(keyTrack) ? keyTrack : 0.0;
-    f.env.attackSeconds  = bitsToDouble(r.u64());
-    f.env.holdSeconds    = bitsToDouble(r.u64());
-    f.env.decaySeconds   = bitsToDouble(r.u64());
-    f.env.sustainLevel   = bitsToDouble(r.u64());
-    f.env.releaseSeconds = bitsToDouble(r.u64());
-    readCurveTail(r, f.velocityCurve);
-}
-
-// Read a RETIRED zone-list payload (v1..v7) and adopt zone ONE. Every zone is still parsed
-// so the truncation ladder behaves exactly as it did — a record that fails mid-way stops the
-// walk — but only the first zone's capture and parameters survive; the rest drop, touching
-// no file and no bank entry.
-// `pv` is the already-consumed payload version (0 = v1, no marker). `projectRate` converts
-// the LEGACY v3 wall-clock frame counts to seconds (seconds = frames / projectRate); v5+
-// blobs carry seconds directly and need no rate.
-PayloadRead readLegacyZonePayload(ByteReader& r, std::uint32_t pv, double projectRate) {
-    PayloadRead out;
-    const bool extended      = (pv >= 2);  // v2+: the loop/start tail is present
-    const bool legacyV3Play  = (pv == 3);  // legacy play tail, wall-clock in nominal frames
-    const bool secondsPlay   = (pv >= 5);  // v5+: full play params, wall-clock in seconds
-    const bool keyTrackTail  = (pv >= 6);  // v6+: keyTrack scalar
-    const bool curveTail     = (pv >= 7);  // v7+: velocity->amp curve, appended last
-    const std::uint32_t count = r.u32();
-    bool adopted = false;
-    for (std::uint32_t i = 0; i < count && r.ok; ++i) {
-        // A v1/v2 payload (no play tail) lifts to the product defaults (Gate + Preserve +
-        // tier-0 AHDSR seconds) — InstrumentParams' own construction defaults.
-        InstrumentParams p;
-        std::string sampleId;
-        const std::uint32_t idLen = r.u32();
-        sampleId = r.str(idLen);
-        r.i32();  // lowNote  — the retired key range; read to keep the record walk aligned
-        r.i32();  // highNote
-        const std::uint8_t hasOverride = r.u8();
-        if (hasOverride) p.rootOverride = r.i32();
-        if (extended) {
-            const std::uint8_t hasLoop = r.u8();
-            if (hasLoop) {
-                SampleLoop lp;
-                lp.hasLoop = (r.u8() != 0);
-                lp.start = r.i64();
-                lp.end = r.i64();
-                p.loopOverride = lp;
-            }
-            const std::uint8_t hasStart = r.u8();
-            if (hasStart) p.startPoint = r.i64();
-        }
-        if (legacyV3Play) {
-            // LEGACY v3 play tail. Wall-clock fields (hold, pitchEnv A/D) were written as
-            // frames -> divide by `projectRate` to reach seconds. Trigger %-length + fades
-            // are source-timeline, read as-is. A/D/S/R are ABSENT in v3 -> keep the defaults.
-            assert(projectRate > 0.0 && "readLegacyZonePayload: projectRate must be > 0 for v3 lift");
-            const double liftRate = projectRate > 0.0 ? projectRate : 1.0;  // avoids div-by-zero; assert fires first
-            p.play.playMode = (r.u8() != 0) ? PlayMode::Trigger : PlayMode::Gate;
-            p.play.adsr.holdSeconds = static_cast<double>(r.i64()) / liftRate;
-            p.play.trigger.lengthFraction = bitsToDouble(r.u64());
-            p.play.trigger.fadeInFrames = r.i64();
-            p.play.trigger.fadeOutFrames = r.i64();
-            p.play.pitchEngine = (r.u8() != 0) ? PitchEngine::Preserve : PitchEngine::Varispeed;
-            p.play.pitchEnv.enabled = (r.u8() != 0);
-            p.play.pitchEnv.attackSeconds = static_cast<double>(r.i64()) / liftRate;
-            p.play.pitchEnv.decaySeconds  = static_cast<double>(r.i64()) / liftRate;
-            p.play.pitchEnv.peakSemitones = bitsToDouble(r.u64());
-        } else if (secondsPlay) {
-            readSecondsPlayTail(r, p);
-        }
-        // A pre-v6 payload leaves keyTrack = 1.0 (100% ET), so an already-saved instance
-        // repitches BIT-IDENTICALLY. A pre-v7 payload leaves VelocityCurve::flat().
-        if (keyTrackTail) p.keyTrack = bitsToDouble(r.u64());
-        if (curveTail) readCurveTail(r, p.velocityCurve);
-        // Payload version 4 (a branch-only frames tail, never shipped) and any unknown pv
-        // leave the seconds product defaults on p.play.
-        if (!r.ok) break;  // truncated mid-record -> keep what parsed cleanly, drop the rest
-        if (!adopted) {
-            out.params = std::move(p);
-            out.adoptedSampleId = std::move(sampleId);
-            adopted = true;
-        }
-    }
-    return out;
-}
-
-// Read whichever payload shape follows: the single-record shape (v8 onward, growing by
-// appended tails), or a retired v1..v7 zone list (adopting zone one). An absent marker means
-// v1 (a plain small zone count).
-PayloadRead readParamsPayload(ByteReader& r, double projectRate) {
-    std::uint32_t pv = 0;  // 0 = v1, no marker
-    if (r.peekU32() == kParamsFormatMarker) {
-        r.u32();       // consume the marker
-        pv = r.u32();  // payload version
-    }
-    if (pv < kParamsSingleRecordVersion) return readLegacyZonePayload(r, pv, projectRate);
-
-    PayloadRead out;
-    InstrumentParams& p = out.params;
-    const std::uint8_t hasRoot = r.u8();
-    if (hasRoot) p.rootOverride = r.i32();
-    const std::uint8_t hasLoop = r.u8();
-    if (hasLoop) {
-        SampleLoop lp;
-        lp.hasLoop = (r.u8() != 0);
-        lp.start = r.i64();
-        lp.end = r.i64();
-        p.loopOverride = lp;
-    }
-    const std::uint8_t hasStart = r.u8();
-    if (hasStart) p.startPoint = r.i64();
-    readSecondsPlayTail(r, p);
-    p.keyTrack = bitsToDouble(r.u64());
-    readCurveTail(r, p.velocityCurve);
-    if (pv >= kParamsFilterVersion) readFilterTail(r, p);
-    // A truncated record leaves whatever parsed plus construction defaults for the rest —
-    // the same degrade-don't-throw contract the zone ladder always had.
-    if (!r.ok) return PayloadRead{};
-    return out;
-}
-
 // Apply a payload read to the state: the adoption rule (a retired payload's first zone
 // supersedes the envelope's selection id) lives here, once.
 void applyPayload(ComponentState& out, PayloadRead read) {

src/core/instrument/map/component_state_io.h

@@ -8,7 +8,8 @@
 // own links are velocity_curve + master_gain (wire value validation), never the engine.
 //
 // EVERY wire format below is FROZEN; the full version ladders (envelope v1..v11, params
-// payload v1..v8) must be preserved exactly.
+// payload v1..v10) must be preserved exactly. This header is the ONE home for both ladders
+// and every version constant; the payload half is IMPLEMENTED in params_payload.
 
 #include <cstdint>
 #include <string>
@@ -70,13 +71,25 @@ namespace reasampler::instrument::map {
 // startPoint (iff set); the v5 play tail verbatim (SECONDS); 8-byte LE keyTrack; then the
 // velocity curve (count + points) as in v7.
 //
-// v9 (CURRENT WRITE FORMAT) is v8 PLUS the per-voice filter tail, appended after the velocity
+// v9 is v8 PLUS the per-voice filter tail, appended after the velocity curve: 1 byte enabled;
-// curve: 1 byte enabled; 8-byte LE cutoffNorm, resonanceNorm, morphNorm, driveNorm (doubles,
+// 8-byte LE cutoffNorm, resonanceNorm, morphNorm, driveNorm (doubles, widened from the
-// widened from the module's floats); 1 byte morphLaw (0 HighBandLow / 1 HighNotchLow); 8-byte
+// module's floats); 1 byte morphLaw (0 HighBandLow / 1 HighNotchLow); 8-byte LE modAmount,
-// LE modAmount, velAmount, keyTrack; 8-byte LE filter-env attack/hold/decay/sustain/release
+// velAmount, keyTrack; 8-byte LE filter-env attack/hold/decay/sustain/release SECONDS; then
-// SECONDS; then the filter's OWN velocity curve (count + points, same shape as v7's). A v8
+// the filter's OWN velocity curve (count + points, same shape as v7's). A v8 blob is a strict
-// blob is a strict prefix, so it lifts to the off/neutral filter default and plays
+// prefix, so it lifts to the off/neutral filter default and plays bit-identically.
-// bit-identically.
+//
+// v10 (CURRENT WRITE FORMAT) is v9 PLUS the staged-curve tail, appended after the filter's
+// velocity curve, all 8-byte LE doubles in this order: amp AHDSR attack/decay/release curve
+// exponents; the Trigger amp AHD (attack SECONDS, decay SECONDS, hold FRACTION, attack curve,
+// decay curve); the pitch envelope's hold FRACTION + attack/decay curve exponents; the filter
+// AHDSR's attack/decay/release curve exponents; the filter's Trigger AHD (same five fields as
+// the amp's). A v9-or-older blob is a strict prefix and lifts to the neutral exponent 1.0.
+//
+// The two int64 slots the v5 play tail spends on the RETIRED Trigger fade pair are frozen in
+// shape and still read: a pre-v10 blob's fade-in/fade-out become the Trigger AHD that replaced
+// them (attack <- fade-in, decay <- fade-out, hold <- the whole remainder), converted to
+// seconds at the project rate the reader is handed. v10 writes ZERO into both — the values
+// live in the AHD now, so a DOWNGRADE to a pre-v10 binary loses the Trigger amp shape.
 //
 // A truncated/unknown/empty payload yields the DEFAULT parameter set.
 
@@ -85,7 +98,7 @@ inline constexpr std::uint32_t kPerformanceStateVersion = 2;
 // The params-payload format version and its detection marker. The marker is a high sentinel
 // no legitimate v1 zone count (bounded by 128 MIDI zones, always tiny) could ever equal, so
 // a reader detects record shape independent of the envelope version.
-inline constexpr std::uint32_t kParamsPayloadVersion = 9;  // v8 + the per-voice filter tail
+inline constexpr std::uint32_t kParamsPayloadVersion = 10;  // v9 + the staged-curve tail
 inline constexpr std::uint32_t kParamsFormatMarker = 0xFFFFFF00u;
 
 // The first SINGLE-RECORD payload version. Everything below it is a retired zone list and
@@ -98,6 +111,9 @@ inline constexpr std::uint32_t kParamsSingleRecordVersion = 8;
 // self-describing, mirroring the envelope's version constants.
 inline constexpr std::uint32_t kParamsFilterVersion = 9;
 
+// v9 + the staged-curve tail (curve exponents, the Trigger AHDs, the pitch Hold fraction).
+inline constexpr std::uint32_t kParamsCurveVersion = 10;
+
 // (No nominal-rate constant.) The legacy v3 payload's wall-clock frame counts convert to
 // seconds at the v3 read boundary using the PROJECT sample rate threaded in as a parameter
 // (frames / projectRate = seconds) — the same rate the build already receives, so the

src/core/instrument/map/params_payload.cpp

@@ -0,0 +1,354 @@
+// params_payload.cpp — see params_payload.h. The format ladder it implements is documented
+// in component_state_io.h; every wire format below is FROZEN.
+
+#include "core/instrument/map/params_payload.h"
+
+#include <algorithm>  // std::min (bounded curve-point reserve)
+#include <cassert>    // assert (v3-lift projectRate guard)
+#include <cmath>      // std::isfinite (wire-value validation)
+#include <utility>    // std::move
+
+#include "core/util/curve_law.h"  // clampCurve / kCurveNeutral (wire validation)
+#include "core/wire/bytes.h"      // putLE / ByteReader / doubleToBits (the ONE LE codec)
+
+namespace reasampler::instrument::map {
+
+using reasampler::wire::ByteReader;
+using reasampler::wire::bitsToDouble;
+using reasampler::wire::doubleToBits;
+using reasampler::wire::putLE;
+
+namespace {
+
+// Signed 64-bit values ride the wire as their two's-complement unsigned image.
+std::uint64_t asU64(std::int64_t v) { return static_cast<std::uint64_t>(v); }
+
+// Emit the OVERRIDE trio shared by the v2..v7 per-zone record and the v8 single record, so
+// the two shapes cannot drift byte-for-byte.
+void putOverrides(std::vector<std::uint8_t>& out, const InstrumentParams& p) {
+    out.push_back(p.rootOverride ? 1 : 0);
+    if (p.rootOverride) {
+        putLE(out, static_cast<std::uint32_t>(static_cast<std::int32_t>(*p.rootOverride)));
+    }
+    out.push_back(p.loopOverride ? 1 : 0);
+    if (p.loopOverride) {
+        out.push_back(p.loopOverride->hasLoop ? 1 : 0);
+        putLE(out, asU64(p.loopOverride->start));
+        putLE(out, asU64(p.loopOverride->end));
+    }
+    out.push_back(p.startPoint ? 1 : 0);
+    if (p.startPoint) putLE(out, asU64(*p.startPoint));
+}
+
+// A velocity curve: 4-byte LE control-point count, then per point velocity + amp as doubles.
+// The amp curve (v7) and the filter's own curve (v9) share this shape.
+void putCurve(std::vector<std::uint8_t>& out, const VelocityCurve& curve) {
+    const std::vector<VelocityPoint>& pts = curve.points();
+    putLE(out, static_cast<std::uint32_t>(pts.size()));
+    for (const VelocityPoint& pt : pts) {
+        putLE(out, doubleToBits(pt.velocity));
+        putLE(out, doubleToBits(pt.amp));
+    }
+}
+
+// A stored AHD's five doubles, in one order shared by every AHD on the wire.
+void putAhd(std::vector<std::uint8_t>& out, const AhdSeconds& a) {
+    putLE(out, doubleToBits(a.attackSeconds));
+    putLE(out, doubleToBits(a.decaySeconds));
+    putLE(out, doubleToBits(a.holdFraction));
+    putLE(out, doubleToBits(a.attackCurve));
+    putLE(out, doubleToBits(a.decayCurve));
+}
+// THE lift of the retired Trigger fade pair onto the AHD that replaced it: Attack takes the
+// fade-in, Decay the fade-out, Hold the whole remainder — so a zero fade-out lands Decay = 0
+// and the abrupt end an old instance could express stays representable. The fades were SOURCE
+// frames and the AHD stores wall-clock seconds, so the conversion goes through the same
+// project rate the v3 lift already uses. A v10-or-newer blob overwrites this from its own tail.
+void liftTriggerFades(std::int64_t fadeInFrames, std::int64_t fadeOutFrames, double projectRate,
+                      AhdSeconds& out) {
+    const double rate = projectRate > 0.0 ? projectRate : 1.0;
+    out.attackSeconds = static_cast<double>(fadeInFrames > 0 ? fadeInFrames : 0) / rate;
+    out.decaySeconds  = static_cast<double>(fadeOutFrames > 0 ? fadeOutFrames : 0) / rate;
+    out.holdFraction  = 1.0;
+}
+
+// Read the play tail (v5 shape onward) into `p`. Shared by the legacy zone reader and the
+// v8 single-record reader so the two can never disagree about field order.
+void readSecondsPlayTail(ByteReader& r, InstrumentParams& p, double projectRate) {
+    p.play.playMode = (r.u8() != 0) ? PlayMode::Trigger : PlayMode::Gate;
+    p.play.adsr.holdSeconds = bitsToDouble(r.u64());
+    p.play.trigger.lengthFraction = bitsToDouble(r.u64());
+    const std::int64_t fadeIn = r.i64();
+    const std::int64_t fadeOut = r.i64();
+    liftTriggerFades(fadeIn, fadeOut, projectRate, p.play.trigAhd);
+    p.play.pitchEngine = (r.u8() != 0) ? PitchEngine::Preserve : PitchEngine::Varispeed;
+    p.play.pitchEnv.enabled = (r.u8() != 0);
+    p.play.pitchEnv.shape.attackSeconds = bitsToDouble(r.u64());
+    p.play.pitchEnv.shape.decaySeconds  = bitsToDouble(r.u64());
+    p.play.pitchEnv.peakSemitones = bitsToDouble(r.u64());
+    p.play.adsr.attackSeconds  = bitsToDouble(r.u64());
+    p.play.adsr.decaySeconds   = bitsToDouble(r.u64());
+    p.play.adsr.sustainLevel   = bitsToDouble(r.u64());
+    p.play.adsr.releaseSeconds = bitsToDouble(r.u64());
+}
+
+// Read a velocity curve tail into `curve`. fromPoints repairs the X-order/endpoint invariant
+// defensively; a truncated read leaves `curve` at whatever default it came in with.
+void readCurveTail(ByteReader& r, VelocityCurve& curve) {
+    const std::uint32_t ptCount = r.u32();
+    std::vector<VelocityPoint> pts;
+    // Bound the reserve to what the blob can hold (16 bytes/point) so a corrupt huge count
+    // can't trigger a giant allocation before the bounded reads fail.
+    const std::size_t remaining = r.bytes.size() > r.pos ? r.bytes.size() - r.pos : 0;
+    pts.reserve(std::min(static_cast<std::size_t>(ptCount), remaining / 16));
+    for (std::uint32_t i = 0; i < ptCount && r.ok; ++i) {
+        const double vel = bitsToDouble(r.u64());
+        const double amp = bitsToDouble(r.u64());
+        pts.push_back(VelocityPoint{vel, amp});
+    }
+    if (r.ok) {
+        curve = reasampler::instrument::engine::VelocityCurve::fromPoints(std::move(pts));
+    }
+}
+
+// Read the v9 filter tail into `p`. A blob that stops short leaves the off/neutral default,
+// which is what makes a v8 blob play bit-identically under the new codec.
+void readFilterTail(ByteReader& r, InstrumentParams& p) {
+    FilterSeconds& f = p.play.filter;
+    f.enabled = (r.u8() != 0);
+    f.settings.cutoffNorm    = static_cast<float>(bitsToDouble(r.u64()));
+    f.settings.resonanceNorm = static_cast<float>(bitsToDouble(r.u64()));
+    f.settings.morphNorm     = static_cast<float>(bitsToDouble(r.u64()));
+    f.settings.driveNorm     = static_cast<float>(bitsToDouble(r.u64()));
+    f.settings.morphLaw = (r.u8() != 0) ? engine::filter::MorphLaw::HighNotchLow
+                                        : engine::filter::MorphLaw::HighBandLow;
+    // Same non-finite-falls-back-to-neutral guard as the v8 master gain above: these three
+    // reach Voice::tickFilterCutoff's clamp compares and a static_cast<int>, both UB on NaN.
+    double modAmount = bitsToDouble(r.u64());
+    double velAmount = bitsToDouble(r.u64());
+    double keyTrack  = bitsToDouble(r.u64());
+    f.modAmount = std::isfinite(modAmount) ? modAmount : 0.0;
+    f.velAmount = std::isfinite(velAmount) ? velAmount : 0.0;
+    f.keyTrack  = std::isfinite(keyTrack) ? keyTrack : 0.0;
+    f.env.attackSeconds  = bitsToDouble(r.u64());
+    f.env.holdSeconds    = bitsToDouble(r.u64());
+    f.env.decaySeconds   = bitsToDouble(r.u64());
+    f.env.sustainLevel   = bitsToDouble(r.u64());
+    f.env.releaseSeconds = bitsToDouble(r.u64());
+    readCurveTail(r, f.velocityCurve);
+}
+
+// A curve exponent off the wire. A corrupt/non-finite value degrades to the LINEAR neutral
+// rather than to an endpoint: neutral is the one exponent that cannot change how a stage
+// sounds, so a damaged blob loses the shaping instead of inventing one.
+double readCurveExponent(ByteReader& r) {
+    const double v = bitsToDouble(r.u64());
+    return std::isfinite(v) ? reasampler::util::clampCurve(v) : reasampler::util::kCurveNeutral;
+}
+
+void readAhd(ByteReader& r, AhdSeconds& a) {
+    a.attackSeconds = bitsToDouble(r.u64());
+    a.decaySeconds  = bitsToDouble(r.u64());
+    const double frac = bitsToDouble(r.u64());
+    a.holdFraction  = std::isfinite(frac) ? frac : 0.0;
+    a.attackCurve   = readCurveExponent(r);
+    a.decayCurve    = readCurveExponent(r);
+}
+
+// Read the v10 staged-curve tail into `p`. A blob that stops short leaves the neutral
+// exponents and the fade-lifted Trigger AHD, which is what makes a v9 blob play as before.
+void readCurveStageTail(ByteReader& r, InstrumentParams& p) {
+    PlaySeconds& pp = p.play;
+    pp.adsr.attackCurve  = readCurveExponent(r);
+    pp.adsr.decayCurve   = readCurveExponent(r);
+    pp.adsr.releaseCurve = readCurveExponent(r);
+    readAhd(r, pp.trigAhd);
+    const double pitchHold = bitsToDouble(r.u64());
+    pp.pitchEnv.shape.holdFraction = std::isfinite(pitchHold) ? pitchHold : 0.0;
+    pp.pitchEnv.shape.attackCurve  = readCurveExponent(r);
+    pp.pitchEnv.shape.decayCurve   = readCurveExponent(r);
+    pp.filter.env.attackCurve  = readCurveExponent(r);
+    pp.filter.env.decayCurve   = readCurveExponent(r);
+    pp.filter.env.releaseCurve = readCurveExponent(r);
+    readAhd(r, pp.filter.trigEnv);
+}
+// Read a RETIRED zone-list payload (v1..v7) and adopt zone ONE. Every zone is still parsed
+// so the truncation ladder behaves exactly as it did — a record that fails mid-way stops the
+// walk — but only the first zone's capture and parameters survive; the rest drop, touching
+// no file and no bank entry.
+// `pv` is the already-consumed payload version (0 = v1, no marker). `projectRate` converts
+// the LEGACY v3 wall-clock frame counts to seconds (seconds = frames / projectRate); v5+
+// blobs carry seconds directly and need no rate.
+PayloadRead readLegacyZonePayload(ByteReader& r, std::uint32_t pv, double projectRate) {
+    PayloadRead out;
+    const bool extended      = (pv >= 2);  // v2+: the loop/start tail is present
+    const bool legacyV3Play  = (pv == 3);  // legacy play tail, wall-clock in nominal frames
+    const bool secondsPlay   = (pv >= 5);  // v5+: full play params, wall-clock in seconds
+    const bool keyTrackTail  = (pv >= 6);  // v6+: keyTrack scalar
+    const bool curveTail     = (pv >= 7);  // v7+: velocity->amp curve, appended last
+    const std::uint32_t count = r.u32();
+    bool adopted = false;
+    for (std::uint32_t i = 0; i < count && r.ok; ++i) {
+        // A v1/v2 payload (no play tail) lifts to the product defaults (Gate + Preserve +
+        // tier-0 AHDSR seconds) — InstrumentParams' own construction defaults.
+        InstrumentParams p;
+        std::string sampleId;
+        const std::uint32_t idLen = r.u32();
+        sampleId = r.str(idLen);
+        r.i32();  // lowNote  — the retired key range; read to keep the record walk aligned
+        r.i32();  // highNote
+        const std::uint8_t hasOverride = r.u8();
+        if (hasOverride) p.rootOverride = r.i32();
+        if (extended) {
+            const std::uint8_t hasLoop = r.u8();
+            if (hasLoop) {
+                SampleLoop lp;
+                lp.hasLoop = (r.u8() != 0);
+                lp.start = r.i64();
+                lp.end = r.i64();
+                p.loopOverride = lp;
+            }
+            const std::uint8_t hasStart = r.u8();
+            if (hasStart) p.startPoint = r.i64();
+        }
+        if (legacyV3Play) {
+            // LEGACY v3 play tail. Wall-clock fields (hold, pitchEnv A/D) were written as
+            // frames -> divide by `projectRate` to reach seconds. Trigger %-length + fades
+            // are source-timeline, read as-is. A/D/S/R are ABSENT in v3 -> keep the defaults.
+            assert(projectRate > 0.0 && "readLegacyZonePayload: projectRate must be > 0 for v3 lift");
+            const double liftRate = projectRate > 0.0 ? projectRate : 1.0;  // avoids div-by-zero; assert fires first
+            p.play.playMode = (r.u8() != 0) ? PlayMode::Trigger : PlayMode::Gate;
+            p.play.adsr.holdSeconds = static_cast<double>(r.i64()) / liftRate;
+            p.play.trigger.lengthFraction = bitsToDouble(r.u64());
+            const std::int64_t fadeIn = r.i64();
+            const std::int64_t fadeOut = r.i64();
+            liftTriggerFades(fadeIn, fadeOut, liftRate, p.play.trigAhd);
+            p.play.pitchEngine = (r.u8() != 0) ? PitchEngine::Preserve : PitchEngine::Varispeed;
+            p.play.pitchEnv.enabled = (r.u8() != 0);
+            p.play.pitchEnv.shape.attackSeconds = static_cast<double>(r.i64()) / liftRate;
+            p.play.pitchEnv.shape.decaySeconds  = static_cast<double>(r.i64()) / liftRate;
+            p.play.pitchEnv.peakSemitones = bitsToDouble(r.u64());
+        } else if (secondsPlay) {
+            readSecondsPlayTail(r, p, projectRate);
+        }
+        // A pre-v6 payload leaves keyTrack = 1.0 (100% ET), so an already-saved instance
+        // repitches BIT-IDENTICALLY. A pre-v7 payload leaves VelocityCurve::flat().
+        if (keyTrackTail) p.keyTrack = bitsToDouble(r.u64());
+        if (curveTail) readCurveTail(r, p.velocityCurve);
+        // Payload version 4 (a branch-only frames tail, never shipped) and any unknown pv
+        // leave the seconds product defaults on p.play.
+        if (!r.ok) break;  // truncated mid-record -> keep what parsed cleanly, drop the rest
+        if (!adopted) {
+            out.params = std::move(p);
+            out.adoptedSampleId = std::move(sampleId);
+            adopted = true;
+        }
+    }
+    return out;
+}
+
+}  // namespace
+
+
+// Append the params payload: marker + version + the single parameter record. Always emits
+// the CURRENT payload version; the marker precedes the record so any reader detects the
+// shape independent of the envelope version (see component_state_io.h).
+void putParamsPayload(std::vector<std::uint8_t>& out, const InstrumentParams& p) {
+    putLE(out, kParamsFormatMarker);
+    putLE(out, kParamsPayloadVersion);
+    putOverrides(out, p);
+
+    // Play params: wall-clock times are SECONDS (doubles); trigger %-length + fades stay
+    // source frames/fraction. Field order matches the header's v5 tail spec verbatim.
+    const PlaySeconds& pp = p.play;
+    out.push_back(pp.playMode == PlayMode::Trigger ? 1 : 0);
+    putLE(out, doubleToBits(pp.adsr.holdSeconds));            // wall-clock seconds
+    putLE(out, doubleToBits(pp.trigger.lengthFraction));      // fraction
+    // The retired fade pair's two frozen slots (see the header): the shape stays, the values
+    // moved into the Trigger AHD tail below.
+    putLE(out, asU64(std::int64_t{0}));
+    putLE(out, asU64(std::int64_t{0}));
+    out.push_back(pp.pitchEngine == PitchEngine::Preserve ? 1 : 0);
+    out.push_back(pp.pitchEnv.enabled ? 1 : 0);
+    putLE(out, doubleToBits(pp.pitchEnv.shape.attackSeconds));  // wall-clock seconds
+    putLE(out, doubleToBits(pp.pitchEnv.shape.decaySeconds));   // wall-clock seconds
+    putLE(out, doubleToBits(pp.pitchEnv.peakSemitones));        // depth
+    // Full AHDSR A/D/S/R tail — wall-clock SECONDS (sustainLevel is a level).
+    putLE(out, doubleToBits(pp.adsr.attackSeconds));
+    putLE(out, doubleToBits(pp.adsr.decaySeconds));
+    putLE(out, doubleToBits(pp.adsr.sustainLevel));
+    putLE(out, doubleToBits(pp.adsr.releaseSeconds));
+    // Key-tracking scalar (1.0 = 100% ET).
+    putLE(out, doubleToBits(p.keyTrack));
+    // The velocity->amp transfer curve: 4-byte LE control-point count, then per point
+    // velocity + amp as doubles (endpoints included, so N >= 2).
+    putCurve(out, p.velocityCurve);
+    // v9: the per-voice filter tail. The module's floats widen to doubles on the wire so the
+    // whole payload stays one numeric shape.
+    const FilterSeconds& f = pp.filter;
+    out.push_back(f.enabled ? 1 : 0);
+    putLE(out, doubleToBits(static_cast<double>(f.settings.cutoffNorm)));
+    putLE(out, doubleToBits(static_cast<double>(f.settings.resonanceNorm)));
+    putLE(out, doubleToBits(static_cast<double>(f.settings.morphNorm)));
+    putLE(out, doubleToBits(static_cast<double>(f.settings.driveNorm)));
+    out.push_back(f.settings.morphLaw == engine::filter::MorphLaw::HighNotchLow ? 1 : 0);
+    putLE(out, doubleToBits(f.modAmount));
+    putLE(out, doubleToBits(f.velAmount));
+    putLE(out, doubleToBits(f.keyTrack));
+    putLE(out, doubleToBits(f.env.attackSeconds));
+    putLE(out, doubleToBits(f.env.holdSeconds));
+    putLE(out, doubleToBits(f.env.decaySeconds));
+    putLE(out, doubleToBits(f.env.sustainLevel));
+    putLE(out, doubleToBits(f.env.releaseSeconds));
+    putCurve(out, f.velocityCurve);
+    // v10: the staged-curve tail.
+    putLE(out, doubleToBits(pp.adsr.attackCurve));
+    putLE(out, doubleToBits(pp.adsr.decayCurve));
+    putLE(out, doubleToBits(pp.adsr.releaseCurve));
+    putAhd(out, pp.trigAhd);
+    putLE(out, doubleToBits(pp.pitchEnv.shape.holdFraction));
+    putLE(out, doubleToBits(pp.pitchEnv.shape.attackCurve));
+    putLE(out, doubleToBits(pp.pitchEnv.shape.decayCurve));
+    putLE(out, doubleToBits(f.env.attackCurve));
+    putLE(out, doubleToBits(f.env.decayCurve));
+    putLE(out, doubleToBits(f.env.releaseCurve));
+    putAhd(out, f.trigEnv);
+}
+
+// Read whichever payload shape follows: the single-record shape (v8 onward, growing by
+// appended tails), or a retired v1..v7 zone list (adopting zone one). An absent marker means
+// v1 (a plain small zone count).
+PayloadRead readParamsPayload(ByteReader& r, double projectRate) {
+    std::uint32_t pv = 0;  // 0 = v1, no marker
+    if (r.peekU32() == kParamsFormatMarker) {
+        r.u32();       // consume the marker
+        pv = r.u32();  // payload version
+    }
+    if (pv < kParamsSingleRecordVersion) return readLegacyZonePayload(r, pv, projectRate);
+
+    PayloadRead out;
+    InstrumentParams& p = out.params;
+    const std::uint8_t hasRoot = r.u8();
+    if (hasRoot) p.rootOverride = r.i32();
+    const std::uint8_t hasLoop = r.u8();
+    if (hasLoop) {
+        SampleLoop lp;
+        lp.hasLoop = (r.u8() != 0);
+        lp.start = r.i64();
+        lp.end = r.i64();
+        p.loopOverride = lp;
+    }
+    const std::uint8_t hasStart = r.u8();
+    if (hasStart) p.startPoint = r.i64();
+    readSecondsPlayTail(r, p, projectRate);
+    p.keyTrack = bitsToDouble(r.u64());
+    readCurveTail(r, p.velocityCurve);
+    if (pv >= kParamsFilterVersion) readFilterTail(r, p);
+    if (pv >= kParamsCurveVersion) readCurveStageTail(r, p);
+    // A truncated record leaves whatever parsed plus construction defaults for the rest —
+    // the same degrade-don't-throw contract the zone ladder always had.
+    if (!r.ok) return PayloadRead{};
+    return out;
+}
+
+}  // namespace reasampler::instrument::map

src/core/instrument/map/params_payload.h

@@ -0,0 +1,41 @@
+#pragma once
+// params_payload — the params-payload half of the ComponentState codec, split from the
+// ENVELOPE half on the axis the format itself already has: the payload carries its OWN
+// version and grows independently of the envelope's, so the two version ladders are two
+// responsibilities. An INTERNAL seam of `component_state_io` — the public entry points stay
+// serialize/deserializeComponentState; nothing outside the codec calls these.
+//
+// The format ladder (payload v1..v10) is documented in component_state_io.h, which stays its
+// one home. EVERY wire format is FROZEN.
+
+#include <cstdint>
+#include <string>
+#include <vector>
+
+// The payload's version constants and the prose ladder stay in component_state_io.h, their
+// one home — this half implements them rather than re-declaring them.
+#include "core/instrument/map/component_state_io.h"
+#include "core/wire/bytes.h"  // ByteReader
+
+namespace reasampler::instrument::map {
+
+// What a payload read yields. `adoptedSampleId` is non-empty ONLY for a retired zone-list
+// payload that carried at least one zone: the first zone's capture, which supersedes the
+// envelope's selection id (see the adoption rule in component_state_io.h).
+struct PayloadRead {
+    InstrumentParams params;
+    std::string adoptedSampleId;
+};
+
+// Append the params payload: marker + version + the single parameter record. Always emits
+// the CURRENT payload version; the marker precedes the record so any reader detects the
+// shape independent of the envelope version.
+void putParamsPayload(std::vector<std::uint8_t>& out, const InstrumentParams& p);
+
+// Read whichever payload shape follows: the single-record shape (v8 onward, growing by
+// appended tails), or a retired v1..v7 zone list (adopting zone one). An absent marker means
+// v1 (a plain small zone count). `projectRate` converts the LEGACY v3 wall-clock frame counts
+// and the retired Trigger fade pair to the seconds domain at the read boundary.
+PayloadRead readParamsPayload(reasampler::wire::ByteReader& r, double projectRate);
+
+}  // namespace reasampler::instrument::map

src/core/instrument/map/sample_map.cpp

@@ -212,6 +212,16 @@ PlayParams resolvePlay(const PlaySeconds& stored, int sampleRate) {
         if (f < 0.0) f = 0.0;
         return static_cast<std::int64_t>(f + 0.5);
     };
+    // The one seconds->frames fold for a stored AHD; the fraction and the curves are rate-free.
+    const auto resolveAhd = [&secToFrames](const AhdSeconds& s) {
+        AhdParams a;
+        a.attackFrames = secToFrames(s.attackSeconds);
+        a.decayFrames  = secToFrames(s.decaySeconds);
+        a.holdFraction = s.holdFraction;
+        a.attackCurve  = s.attackCurve;
+        a.decayCurve   = s.decayCurve;
+        return a;
+    };
     PlayParams out;
     out.playMode = stored.playMode;
     out.adsr.attackFrames  = secToFrames(stored.adsr.attackSeconds);
@@ -219,12 +229,15 @@ PlayParams resolvePlay(const PlaySeconds& stored, int sampleRate) {
     out.adsr.decayFrames   = secToFrames(stored.adsr.decaySeconds);
     out.adsr.sustainLevel  = stored.adsr.sustainLevel;   // level, not a time
     out.adsr.releaseFrames = secToFrames(stored.adsr.releaseSeconds);
-    out.trigger = stored.trigger;                        // source-frame / fraction, unchanged
+    out.adsr.attackCurve   = stored.adsr.attackCurve;    // dimensionless
+    out.adsr.decayCurve    = stored.adsr.decayCurve;
+    out.adsr.releaseCurve  = stored.adsr.releaseCurve;
+    out.trigger = stored.trigger;                        // fraction, unchanged
+    out.trigAhd = resolveAhd(stored.trigAhd);
     out.pitchEngine = stored.pitchEngine;
     out.pitchEnv.enabled       = stored.pitchEnv.enabled;
-    out.pitchEnv.attackFrames  = secToFrames(stored.pitchEnv.attackSeconds);
-    out.pitchEnv.decayFrames   = secToFrames(stored.pitchEnv.decaySeconds);
     out.pitchEnv.peakSemitones = stored.pitchEnv.peakSemitones;  // depth, not a time
+    out.pitchEnv.shape         = resolveAhd(stored.pitchEnv.shape);
     // Filter: the control positions are already rate-free and carry through untouched; only
     // its envelope resolves to frames.
     out.filter.enabled   = stored.filter.enabled;
@@ -238,6 +251,10 @@ PlayParams resolvePlay(const PlaySeconds& stored, int sampleRate) {
     out.filter.env.decayFrames   = secToFrames(stored.filter.env.decaySeconds);
     out.filter.env.sustainLevel  = stored.filter.env.sustainLevel;
     out.filter.env.releaseFrames = secToFrames(stored.filter.env.releaseSeconds);
+    out.filter.env.attackCurve   = stored.filter.env.attackCurve;
+    out.filter.env.decayCurve    = stored.filter.env.decayCurve;
+    out.filter.env.releaseCurve  = stored.filter.env.releaseCurve;
+    out.filter.trigEnv           = resolveAhd(stored.filter.trigEnv);
     return out;
 }
 

src/core/instrument/map/sample_map.h

@@ -143,21 +143,35 @@ std::vector<AudioSample> extractChannel(const std::vector<AudioSample>& interlea
 // Trigger %-length + fades) stay in source frames/fractions, carried through unchanged
 // (TriggerParams reused verbatim).
 //
-// The stored AHDSR times (seconds). sustainLevel is dimensionless (0..1), not a time.
+// The stored AHDSR times (seconds). sustainLevel is dimensionless (0..1), not a time; the
+// three curve exponents are dimensionless too (curve_law.h owns their domain).
 struct AdsrSeconds {
     double attackSeconds  = 0.003;  // tier-0 default
     double holdSeconds    = 0.0;
     double decaySeconds   = 0.0;
     double sustainLevel   = 1.0;
     double releaseSeconds = 0.060;  // tier-0 default
+    double attackCurve    = util::kCurveNeutral;
+    double decayCurve     = util::kCurveNeutral;
+    double releaseCurve   = util::kCurveNeutral;
 };
 
-// The stored AD pitch-envelope times (seconds). enabled + peakSemitones are dimensionless.
+// The stored sustain-less AHD: wall-clock stage times in SECONDS, Hold as a FRACTION of the
-struct PitchEnvSeconds {
+// span left after them (AhdParams owns why a fraction, not a time).
-    bool   enabled       = false;
+struct AhdSeconds {
     double attackSeconds = 0.0;
     double decaySeconds  = 0.0;
+    double holdFraction  = 1.0;
+    double attackCurve   = util::kCurveNeutral;
+    double decayCurve    = util::kCurveNeutral;
+};
+
+// The stored AHD pitch envelope. enabled + peakSemitones are dimensionless. The hold fraction
+// defaults to 0 so an instance predating the stage plays as its attack-decay predecessor did.
+struct PitchEnvSeconds {
+    bool       enabled       = false;
     double     peakSemitones = 0.0;  // signed depth at the peak
+    AhdSeconds shape{0.0, 0.0, /*holdFraction=*/0.0, util::kCurveNeutral, util::kCurveNeutral};
 };
 
 // The stored mirror of the engine's FilterParams (play_params.h, which owns what each field
@@ -171,7 +185,8 @@ struct FilterSeconds {
     double modAmount = 0.0;
     double velAmount = 0.0;
     double keyTrack  = 0.0;
-    AdsrSeconds env{0.0, 0.0, 0.0, 1.0, 0.0};
+    AdsrSeconds env{0.0, 0.0, 0.0, 1.0, 0.0};  // Gate
+    AhdSeconds  trigEnv;                       // Trigger
     VelocityCurve velocityCurve = VelocityCurve::linear();
 };
 
@@ -180,10 +195,11 @@ struct FilterSeconds {
 // from the engine-facing PlayParams (frames).
 struct PlaySeconds {
     PlayMode        playMode = PlayMode::Gate;
-    AdsrSeconds     adsr;                                  // Gate: AHDSR (seconds)
+    AdsrSeconds     adsr;                                 // Gate amp: AHDSR (seconds)
-    TriggerParams   trigger;                              // Trigger: %-length + fades (source frames)
+    TriggerParams   trigger;                              // Trigger play span (%-length)
+    AhdSeconds      trigAhd;                              // Trigger amp: AHD (seconds + fraction)
     PitchEngine     pitchEngine = kDefaultPitchEngine;    // product default: Preserve
-    PitchEnvSeconds pitchEnv;                             // AD pitch modulation (seconds), off by default
+    PitchEnvSeconds pitchEnv;                             // AHD pitch modulation, off by default
     FilterSeconds   filter;                               // per-voice filter, off by default
 };
 

src/core/instrument/map/trigger_seam.cpp

@@ -14,14 +14,4 @@ std::int64_t triggerPlayLength(double lengthFraction,
     return static_cast<std::int64_t>(lengthFraction * static_cast<double>(postStart) + 0.5);
 }
 
-double framesToFadeFraction(std::int64_t fadeFrames, std::int64_t playLength) {
-    if (playLength <= 0) return 0.0;
-    return static_cast<double>(fadeFrames) / static_cast<double>(playLength);
-}
-
-std::int64_t fadeFractionToFrames(double fadeFraction, std::int64_t playLength) {
-    if (playLength <= 0) return 0;
-    return static_cast<std::int64_t>(fadeFraction * static_cast<double>(playLength) + 0.5);
-}
-
 }  // namespace reasampler::instrument::map

src/core/instrument/map/trigger_seam.h

@@ -1,8 +1,7 @@
-// trigger_seam — converts Trigger fade lengths between the engine domain (TriggerParams:
+// trigger_seam — the shared Trigger play-span formula: how the stored %-length becomes the
-// SOURCE FRAMES, anchored to the source-timeline read pointer) and the overlay domain
+// source-frame span the voice plays and the overlay draws over. One home so the engine's
-// (AmpEnvelope: FRACTIONS in [0,1] of the played span, so the drawn shape stays invariant
+// note-on resolve and the editor's overlay pack cannot disagree about where a Trigger note
-// across sample-rate changes). Owns the one shared pack/unpack formula so both directions
+// ends.
-// stay consistent; reasampler_editor calls these from packEnvelope/unpackEnvelope.
 //
 // playLengthFrames = round(lengthFraction * (frameCount - startFrame))
 
@@ -19,11 +18,4 @@ std::int64_t triggerPlayLength(double lengthFraction,
                                std::int64_t frameCount,
                                std::int64_t startFrame);
 
-// PACK direction (draw path): frames -> fraction of play span. Not clamped here — the
-// caller clamps to [0,1] when filling AmpEnvelope (envelope_edit owns that logic).
-double framesToFadeFraction(std::int64_t fadeFrames, std::int64_t playLength);
-
-// UNPACK direction (commit path): fraction -> nearest source frame.
-std::int64_t fadeFractionToFrames(double fadeFraction, std::int64_t playLength);
-
 }  // namespace reasampler::instrument::map

src/core/instrument/ui/deck_groups.cpp

@@ -15,6 +15,7 @@ double deckBipolarFromNorm(double norm) { return clamp(norm, 0.0, 1.0) * 2.0 - 1
 double deckNormFromBipolar(double value) { return clamp(value, -1.0, 1.0) * 0.5 + 0.5; }
 
 std::vector<DeckGroupDesc> sampleDeckGroups(PlayMode playMode) {
+    const bool trigger = (playMode == PlayMode::Trigger);
     std::vector<DeckGroupDesc> out;
     {
         DeckGroupDesc pitch;
@@ -28,8 +29,10 @@ std::vector<DeckGroupDesc> sampleDeckGroups(PlayMode playMode) {
         DeckGroupDesc penv;
         penv.id = kGroupPitchEnv;
         penv.captionWidth = 58;
+        penv.captionRadio = {id(DeckParam::kPitchEnvSelect)};
         penv.captionToggle = {id(DeckParam::kPitchEnvEnable), 32};
         penv.cellIds = {id(DeckParam::kPitchEnvAttack),
+                        id(DeckParam::kPitchEnvHold),
                         id(DeckParam::kPitchEnvDecay),
                         id(DeckParam::kPitchEnvDepth)};
         out.push_back(std::move(penv));
@@ -54,27 +57,35 @@ std::vector<DeckGroupDesc> sampleDeckGroups(PlayMode playMode) {
         DeckGroupDesc fenv;
         fenv.id = kGroupFilterEnv;
         fenv.captionWidth = 66;
+        fenv.captionRadio = {id(DeckParam::kFilterEnvSelect)};
+        if (trigger) {
+            fenv.cellIds = {id(DeckParam::kFilterTrigAttack), id(DeckParam::kFilterTrigHold),
+                            id(DeckParam::kFilterTrigDecay), -1, -1};
+        } else {
             fenv.cellIds = {id(DeckParam::kFilterEnvAttack),
                             id(DeckParam::kFilterEnvHold),
                             id(DeckParam::kFilterEnvDecay),
                             id(DeckParam::kFilterEnvSustain),
                             id(DeckParam::kFilterEnvRelease)};
+        }
         out.push_back(std::move(fenv));
     }
     {
         DeckGroupDesc amp;
         amp.id = kGroupAmpEnv;
         amp.captionWidth = 78;
+        amp.captionRadio = {id(DeckParam::kAmpEnvSelect)};
         amp.captionToggle = {id(DeckParam::kPlayMode), 44};
-        if (playMode == PlayMode::Gate) {
+        if (trigger) {
+            // The play span first, then the AHD that shapes it, time-ordered left-to-right so
+            // the row reads like the drawn envelope. One blank keeps the group's width — and
+            // therefore its neighbours' placement — identical across a mode flip.
+            amp.cellIds = {id(DeckParam::kTrigLength), id(DeckParam::kTrigAttack),
+                           id(DeckParam::kTrigHold), id(DeckParam::kTrigDecay), -1};
+        } else {
             amp.cellIds = {id(DeckParam::kAttack), id(DeckParam::kHold),
                            id(DeckParam::kDecay), id(DeckParam::kSustain),
                            id(DeckParam::kRelease)};
-        } else {
-            // Trigger, time-ordered left-to-right (Fade In / Length % / Fade Out — matches
-            // the drawn envelope), plus two blanks (see knob_deck.h's blank-cell contract).
-            amp.cellIds = {id(DeckParam::kTrigFadeIn), id(DeckParam::kTrigLength),
-                           id(DeckParam::kTrigFadeOut), -1, -1};
         }
         out.push_back(std::move(amp));
     }
@@ -97,6 +108,24 @@ std::vector<DeckGroupDesc> sampleDeckGroups(PlayMode playMode) {
     return out;
 }
 
+DeckParam curveParamFor(DeckParam knob) {
+    switch (knob) {
+        case DeckParam::kAttack:            return DeckParam::kAttackCurve;
+        case DeckParam::kDecay:             return DeckParam::kDecayCurve;
+        case DeckParam::kRelease:           return DeckParam::kReleaseCurve;
+        case DeckParam::kTrigAttack:        return DeckParam::kTrigAttackCurve;
+        case DeckParam::kTrigDecay:         return DeckParam::kTrigDecayCurve;
+        case DeckParam::kPitchEnvAttack:    return DeckParam::kPitchEnvAttackCurve;
+        case DeckParam::kPitchEnvDecay:     return DeckParam::kPitchEnvDecayCurve;
+        case DeckParam::kFilterEnvAttack:   return DeckParam::kFilterEnvAttackCurve;
+        case DeckParam::kFilterEnvDecay:    return DeckParam::kFilterEnvDecayCurve;
+        case DeckParam::kFilterEnvRelease:  return DeckParam::kFilterEnvReleaseCurve;
+        case DeckParam::kFilterTrigAttack:  return DeckParam::kFilterTrigAttackCurve;
+        case DeckParam::kFilterTrigDecay:   return DeckParam::kFilterTrigDecayCurve;
+        default:                            return DeckParam::kCount;
+    }
+}
+
 bool isLiveDeckParam(DeckParam id) {
     switch (id) {
         case DeckParam::kAttack:
@@ -104,7 +133,11 @@ bool isLiveDeckParam(DeckParam id) {
         case DeckParam::kDecay:
         case DeckParam::kSustain:
         case DeckParam::kRelease:
+        case DeckParam::kTrigAttack:
+        case DeckParam::kTrigHold:
+        case DeckParam::kTrigDecay:
         case DeckParam::kPitchEnvAttack:
+        case DeckParam::kPitchEnvHold:
         case DeckParam::kPitchEnvDecay:
         case DeckParam::kPitchEnvDepth:
         case DeckParam::kFilterMorph:
@@ -118,6 +151,21 @@ bool isLiveDeckParam(DeckParam id) {
         case DeckParam::kFilterEnvDecay:
         case DeckParam::kFilterEnvSustain:
         case DeckParam::kFilterEnvRelease:
+        case DeckParam::kFilterTrigAttack:
+        case DeckParam::kFilterTrigHold:
+        case DeckParam::kFilterTrigDecay:
+        case DeckParam::kAttackCurve:
+        case DeckParam::kDecayCurve:
+        case DeckParam::kReleaseCurve:
+        case DeckParam::kTrigAttackCurve:
+        case DeckParam::kTrigDecayCurve:
+        case DeckParam::kPitchEnvAttackCurve:
+        case DeckParam::kPitchEnvDecayCurve:
+        case DeckParam::kFilterEnvAttackCurve:
+        case DeckParam::kFilterEnvDecayCurve:
+        case DeckParam::kFilterEnvReleaseCurve:
+        case DeckParam::kFilterTrigAttackCurve:
+        case DeckParam::kFilterTrigDecayCurve:
             return true;
         // Listed rather than defaulted so a newly added control is a COMPILE error here (the
         // -Wswitch gate is GCC/Clang; MSVC's C4062 is off at this project's warning level)
@@ -125,13 +173,14 @@ bool isLiveDeckParam(DeckParam id) {
         case DeckParam::kPlayMode:
         case DeckParam::kPitchEngine:
         case DeckParam::kTrigLength:
-        case DeckParam::kTrigFadeIn:
-        case DeckParam::kTrigFadeOut:
         case DeckParam::kPitchEnvEnable:
         case DeckParam::kKeyTrack:
         case DeckParam::kFilterEnable:
         case DeckParam::kFilterVel:
         case DeckParam::kFilterLaw:
+        case DeckParam::kAmpEnvSelect:
+        case DeckParam::kPitchEnvSelect:
+        case DeckParam::kFilterEnvSelect:
         case DeckParam::kVoiceCount:
         case DeckParam::kVoiceMode:
         case DeckParam::kMonoTrigger:
@@ -142,13 +191,13 @@ bool isLiveDeckParam(DeckParam id) {
     return false;  // unreachable for a valid enumerator; silences a warning.
 }
 
-bool liveCommitFor(LiveDragKind kind, int paramId, PlayMode playMode) {
+bool liveCommitFor(LiveDragKind kind, int paramId) {
     switch (kind) {
         case LiveDragKind::kDeckKnob:
             return paramId >= 0 && paramId < static_cast<int>(DeckParam::kCount) &&
                    isLiveDeckParam(static_cast<DeckParam>(paramId));
         case LiveDragKind::kEnvNode:
-            return playMode == PlayMode::Gate;
+            return true;
         case LiveDragKind::kOther:
             return false;
     }

src/core/instrument/ui/deck_groups.h

@@ -7,7 +7,7 @@
 
 #include <vector>
 
-#include "core/instrument/engine/play_params.h"  // PlayMode (the AMP group's Gate/Trigger face)
+#include "core/instrument/engine/play_params.h"  // PlayMode (the mode-dependent group faces)
 #include "core/instrument/ui/knob_deck.h"        // DeckGroupDesc
 
 namespace reasampler::instrument::ui {
@@ -17,18 +17,20 @@ namespace reasampler::instrument::ui {
 enum class DeckParam {
     kPlayMode = 0,   // Gate | Trigger toggle
     kPitchEngine,    // Varispeed | Preserve toggle
-    kAttack,         // AHDSR attack   (Gate)  / —
+    kAttack,         // amp AHDSR attack  (Gate)
-    kHold,           // AHDSR hold     (Gate)
+    kHold,           // amp AHDSR hold    (Gate)
-    kDecay,          // AHDSR decay    (Gate)
+    kDecay,          // amp AHDSR decay   (Gate)
-    kSustain,        // AHDSR sustain  (Gate)
+    kSustain,        // amp AHDSR sustain (Gate)
-    kRelease,        // AHDSR release  (Gate)
+    kRelease,        // amp AHDSR release (Gate)
-    kTrigLength,     // Trigger %-length
+    kTrigLength,     // Trigger play span, % of the post-start length
-    kTrigFadeIn,     // Trigger fade-in
+    kTrigAttack,     // amp AHD attack    (Trigger)
-    kTrigFadeOut,    // Trigger fade-out
+    kTrigHold,       // amp AHD hold, % of the span left after attack + decay
-    kPitchEnvEnable, // AD pitch envelope on|off
+    kTrigDecay,      // amp AHD decay     (Trigger)
-    kPitchEnvAttack, // AD pitch attack
+    kPitchEnvEnable, // AHD pitch envelope on|off
-    kPitchEnvDecay,  // AD pitch decay
+    kPitchEnvAttack,
-    kPitchEnvDepth,  // AD pitch depth in +/- semitones
+    kPitchEnvHold,   // % of the span left after attack + decay
+    kPitchEnvDecay,
+    kPitchEnvDepth,  // AHD pitch depth in +/- semitones
     kKeyTrack,       // key-tracking 0..200% (lives on InstrumentParams, not PlaySeconds)
     // Filter. The four control positions map through filter_params' own laws; the three
     // depths are bipolar and centred at zero.
@@ -41,11 +43,32 @@ enum class DeckParam {
     kFilterVel,      // velocity -> cutoff, +/-100%
     kFilterKeyTrack, // note -> cutoff, 0..200%
     kFilterLaw,      // morph law row toggle: HP-BP-LP | HP-notch-LP
-    kFilterEnvAttack,
+    kFilterEnvAttack,   // filter AHDSR (Gate)
     kFilterEnvHold,
     kFilterEnvDecay,
     kFilterEnvSustain,
     kFilterEnvRelease,
+    kFilterTrigAttack,  // filter AHD (Trigger)
+    kFilterTrigHold,
+    kFilterTrigDecay,
+    // Curve exponents. These never get a cell of their own — each is the INNER DIAL of the
+    // stage knob it shapes (see curveParamFor), which is why only sloped stages have one.
+    kAttackCurve,
+    kDecayCurve,
+    kReleaseCurve,
+    kTrigAttackCurve,
+    kTrigDecayCurve,
+    kPitchEnvAttackCurve,
+    kPitchEnvDecayCurve,
+    kFilterEnvAttackCurve,
+    kFilterEnvDecayCurve,
+    kFilterEnvReleaseCurve,
+    kFilterTrigAttackCurve,
+    kFilterTrigDecayCurve,
+    // Overlay selection radios — transient view state, not parameters.
+    kAmpEnvSelect,
+    kPitchEnvSelect,
+    kFilterEnvSelect,
     // Deck-only controls: processor-side per-instance params — routed to the processor
     // setters, never through the parameter set.
     kVoiceCount,     // polyphony bound (1..32) — a stepped knob in the VOICE group
@@ -68,17 +91,24 @@ enum DeckGroupId {
 };
 
 // The deck's groups, left to right, in SIGNAL-FLOW order: pitch -> filter -> amp, then the
-// two instance-wide groups. `playMode` picks the AMP group's face, via knob_deck's blank-cell
+// two instance-wide groups. `playMode` picks the AMP and FILTER ENV groups' faces — AHDSR in
-// reservation (knob_deck.h) so a mode flip never reflows the neighbouring groups.
+// Gate, AHD in Trigger — via knob_deck's blank-cell reservation (knob_deck.h) so a mode flip
+// never reflows the neighbouring groups.
 std::vector<DeckGroupDesc> sampleDeckGroups(PlayMode playMode);
 
+// The curve-exponent control a stage knob's INNER DIAL edits, or kCount when the knob shapes
+// no curve. THE one place the "every stage except Hold and Sustain is sloped" rule is written
+// down: a knob with no entry here draws no inner dial and its inner region resolves as an
+// ordinary knob grab.
+DeckParam curveParamFor(DeckParam knob);
+
 // Whether control `id` is delivered LIVE — straight to the voices that are already sounding —
 // rather than through an instrument reload. The line is drawn at continuously-valued playback
 // controls, so this is a routing decision at the editor's commit site rather than a property
 // of any one knob; moving a control across the line is a change here and nowhere else.
 //
-// THE home for why each excluded control is excluded. Five continuous controls are outside the
+// THE home for why each excluded control is excluded. Three continuous controls are outside
-// live set, plus every discrete toggle:
+// the live set, plus every discrete toggle and the overlay radios:
 //   - the discrete toggles (play mode, pitch engine, filter enable/law, pitch-envelope enable)
 //     name a different sound rather than a different setting of one;
 //   - the three capture-anchored overrides (root, loop span, start frame) name positions in
@@ -86,13 +116,10 @@ std::vector<DeckGroupDesc> sampleDeckGroups(PlayMode playMode);
 //   - kKeyTrack and kFilterVel feed values a voice latches at note-on by design (the pitch
 //     ratio and the velocity-curve result), so live delivery would retune or re-gain a note
 //     already struck;
-//   - kTrigLength resolves playEnd_, a fact about the note. kTrigFadeIn/kTrigFadeOut are pure
+//   - kTrigLength resolves playEnd_, a fact about the note, not a setting of it;
-//     amplitude shape and would be live-able in principle, but they live in `sample.play` and
+//   - the overlay radios select what the editor DRAWS and reach no parameter at all.
-//     are baked into SampleData at build time — the engine rebuild copies that verbatim, so
+// Both amp shapes are live: the Trigger fade pair that used to reload folded into the AHD and
-//     only a reload can deliver them without widening LiveValues. They fold into the AHD
+// inherited its routing, so a Trigger-mode instance now tracks its amplitude knobs too.
-//     alongside Gate's, at which point they inherit its routing; until then they reload.
-// Consequence, stated plainly: a Trigger-mode instance gets NO live delivery on its amplitude
-// controls. Only the filter and pitch-envelope knobs move a sounding Trigger one-shot.
 bool isLiveDeckParam(DeckParam id);
 
 // The editor drag kinds that can commit live, in this pure module's own vocabulary (the
@@ -102,9 +129,9 @@ enum class LiveDragKind { kOther, kDeckKnob, kEnvNode };
 
 // Whether a drag of `kind` commits live. A deck knob is live per isLiveDeckParam (negative ids
 // are the shell's processor-side sentinels and out-of-range ids are not controls, so neither
-// reaches the enum); an envelope-node drag is live only in Gate, where it edits the AHDSR —
+// reaches the enum); an envelope-node drag is live in either mode, since every stage value it
-// in Trigger the same drag rewrites the play span, which is not a live control.
+// can reach — AHDSR or AHD, on any of the three envelopes — is itself live.
-bool liveCommitFor(LiveDragKind kind, int paramId, PlayMode playMode);
+bool liveCommitFor(LiveDragKind kind, int paramId);
 
 // The deck's BIPOLAR knob law: 0.5 of the knob's travel is zero depth, the ends are -1 and
 // +1. Exact inverses, and exact at the centre detent (0.5 -> 0 -> 0.5), so a knob parked at

src/core/instrument/ui/envelope_edit.cpp

@@ -2,11 +2,17 @@
 
 #include "core/instrument/ui/envelope_edit.h"
 
+#include "core/util/clamp01.h"
+
 #include <algorithm>
 #include <cstdlib>  // std::abs
 
 namespace reasampler::instrument::ui {
 
+using util::clamp01;
+using util::curveFromMidLevel;
+using util::curveMidLevel;
+
 namespace {
 
 // Matches envelope_overlay::timeToX. Zero when the area is degenerate (no motion).
@@ -30,49 +36,84 @@ double levelPerPixel(const Rect& area) {
     return 1.0 / static_cast<double>(h - 1);
 }
 
-// Origin + ReleaseStart are draw-only anchors, not grabbable.
+// Origin is a draw-only anchor; so is an AHDSR's ReleaseEnd, which is pinned to the right edge
+// (release is dragged from ReleaseStart instead).
 bool isDraggable(EnvNode n) {
     switch (n) {
         case EnvNode::Origin:
-        case EnvNode::ReleaseStart:
+        case EnvNode::ReleaseEnd:
             return false;
         default:
             return true;
     }
 }
 
-// Guards the degenerate baseline's cross-mode ReleaseEnd vertex from writing releaseSeconds in
+// Guards the degenerate baseline's cross-kind vertices, and keeps the sustain-only nodes off an
-// Trigger mode (and vice versa). Applied by both the hit-test and the drag resolver.
+// AHD. Applied by both the hit-test and the drag resolver.
-bool nodeInMode(EnvNode n, EnvMode m) {
+bool nodeInKind(EnvNode n, EnvKind k) {
     switch (n) {
         case EnvNode::AttackEnd:
         case EnvNode::HoldEnd:
         case EnvNode::DecayEnd:
-        case EnvNode::ReleaseEnd:
+        case EnvNode::AttackCurve:
-            return m == EnvMode::Gate;
+        case EnvNode::DecayCurve:
-        case EnvNode::FadeInEnd:
+            return true;
-        case EnvNode::FadeOutStart:
-        case EnvNode::LengthEnd:
-            return m == EnvMode::Trigger;
-        case EnvNode::Origin:
         case EnvNode::ReleaseStart:
+        case EnvNode::ReleaseCurve:
+            return k == EnvKind::Ahdsr;
+        case EnvNode::Origin:
+        case EnvNode::ReleaseEnd:
             return false;
     }
     return false;
 }
 
+// The two endpoint levels of the segment a curve knot shapes. `ok` is false when the segment
+// is level (nothing a curve could express), so the drag is a no-op rather than a division.
+struct SegmentLevels {
+    double start = 0.0;
+    double end = 0.0;
+    bool ok = false;
+};
+SegmentLevels segmentLevels(const StageEnvelope& env, EnvNode knot) {
+    const double sus = clamp01(env.sustainLevel);
+    SegmentLevels s;
+    switch (knot) {
+        case EnvNode::AttackCurve: s = {0.0, 1.0, true}; break;
+        case EnvNode::DecayCurve:
+            s = {1.0, env.kind == EnvKind::Ahdsr ? sus : 0.0, true};
+            break;
+        case EnvNode::ReleaseCurve: s = {sus, 0.0, true}; break;
+        default: return s;
+    }
+    if (s.start == s.end) s.ok = false;
+    return s;
+}
+
+// A knot drag: the grab-time mid-level shifted by the pixel delta, read back through
+// curve_law's inverse. Both directions go through the ONE law, which is why the knot and the
+// inner dial cannot express different exponents.
+double curveFromKnotDrag(const StageEnvelope& grabEnv, EnvNode knot, double grabExponent,
+                         const Rect& area, int dyPixels) {
+    const SegmentLevels seg = segmentLevels(grabEnv, knot);
+    if (!seg.ok) return grabExponent;
+    const double grabLevel = seg.start + (seg.end - seg.start) * curveMidLevel(grabExponent);
+    const double newLevel = grabLevel - static_cast<double>(dyPixels) * levelPerPixel(area);
+    return curveFromMidLevel((newLevel - seg.start) / (seg.end - seg.start));
+}
+
 }  // namespace
 
-NodeHit nodeAtPoint(const AmpEnvelope& env, const OverlayArea& area, double totalSeconds, int x,
+NodeHit nodeAtPoint(const StageEnvelope& env, const OverlayArea& area, double totalSeconds,
-                    int y) {
+                    int x, int y) {
     const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, area, totalSeconds);
-    // Nearest draggable, mode-matching node within the pick radius wins (Chebyshev distance);
+    // Nearest draggable, kind-matching node within the pick radius wins (Chebyshev distance);
-    // ties go to the earlier draw-order node. Only matters for Trigger's zero-fade-out
+    // ties go to the earlier draw-order node. Knots are appended last, so a knot coincident
-    // coincidence (FadeOutStart overlaps LengthEnd and wins).
+    // with an endpoint handle loses — a drag there stays a time edit.
     NodeHit best;
     int bestDist = kNodeGrabRadius + 1;
     for (const EnvVertex& v : poly) {
-        if (!isDraggable(v.node) || !nodeInMode(v.node, env.mode)) continue;
+        if (!isDraggable(v.node) || !nodeInKind(v.node, env.kind)) continue;
         const int dist = std::max(std::abs(x - v.x), std::abs(y - v.y));
         if (dist < bestDist) {  // strict-less-than keeps ties at the earlier draw order
             bestDist = dist;
@@ -82,11 +123,11 @@ NodeHit nodeAtPoint(const AmpEnvelope& env, const OverlayArea& area, double tota
     return best;
 }
 
-AmpEnvelope resolveNodeDrag(const AmpEnvelope& grabEnv, EnvNode node, const OverlayArea& area,
+StageEnvelope resolveNodeDrag(const StageEnvelope& grabEnv, EnvNode node, const OverlayArea& area,
                               double totalSeconds, const EnvClampBounds& bounds,
                               int dxPixels, int dyPixels) {
-    AmpEnvelope out = grabEnv;
+    StageEnvelope out = grabEnv;
-    if (!isDraggable(node) || !nodeInMode(node, grabEnv.mode)) return out;
+    if (!isDraggable(node) || !nodeInKind(node, grabEnv.kind)) return out;
 
     const Rect& rect = area.rect;
     const double secPerPx = secondsPerPixel(rect, totalSeconds);
@@ -94,63 +135,80 @@ AmpEnvelope resolveNodeDrag(const AmpEnvelope& grabEnv, EnvNode node, const Over
     const double dSec = static_cast<double>(dxPixels) * secPerPx;
     const double gateDSec = static_cast<double>(dxPixels) * gateSecondsPerPixel(rect);
 
+    if (grabEnv.kind == EnvKind::Ahdsr) {
         switch (node) {
-        // Gate: each cumulative-time node edits its own segment duration. Non-negative durations
+            // Each cumulative-time node edits its own segment duration. Non-negative durations
-        // ARE the monotonic-in-time guarantee (a segment can never go negative, so a node can
+            // ARE the monotonic-in-time guarantee (a segment can never go negative, so a node
-        // never cross a neighbour) — the [0, max] clamp is the whole constraint.
+            // can never cross a neighbour) — the [0, max] clamp is the whole constraint.
             case EnvNode::AttackEnd:
                 out.attackSeconds =
                     std::clamp(grabEnv.attackSeconds + gateDSec, 0.0, bounds.maxAttackSeconds);
                 break;
             case EnvNode::HoldEnd:
-            out.holdSeconds = std::clamp(grabEnv.holdSeconds + gateDSec, 0.0, bounds.maxHoldSeconds);
+                out.holdSeconds =
+                    std::clamp(grabEnv.holdSeconds + gateDSec, 0.0, bounds.maxHoldSeconds);
                 break;
             case EnvNode::DecayEnd: {
                 // X sets decay time, Y sets sustain level (drag down = higher y = lower level).
-            out.decaySeconds = std::clamp(grabEnv.decaySeconds + gateDSec, 0.0, bounds.maxDecaySeconds);
+                out.decaySeconds =
-            const double lvlPerPx = levelPerPixel(rect);
+                    std::clamp(grabEnv.decaySeconds + gateDSec, 0.0, bounds.maxDecaySeconds);
-            const double dLevel = -static_cast<double>(dyPixels) * lvlPerPx;
+                const double dLevel = -static_cast<double>(dyPixels) * levelPerPixel(rect);
                 out.sustainLevel = std::clamp(grabEnv.sustainLevel + dLevel, 0.0, 1.0);
                 break;
             }
-        case EnvNode::ReleaseEnd:
-            out.releaseSeconds =
-                std::clamp(grabEnv.releaseSeconds + gateDSec, 0.0, bounds.maxReleaseSeconds);
-            break;
-
-        // Trigger: fades + length are fractions. X pixels convert to a fraction of the played
-        // span (fades) or the whole sample (length). fadeIn + fadeOut <= 1 keeps the two fade
-        // nodes from crossing (each clamps against the other).
-        case EnvNode::FadeInEnd: {
-            if (dxPixels == 0) break;  // zero-motion grab: no param change, no division
-            const double playSeconds = std::max(0.0, grabEnv.lengthFraction) * totalSeconds;
-            const double dFrac = playSeconds > 0.0 ? dSec / playSeconds : 0.0;
-            const double hi = std::min(bounds.maxFadeInFraction,
-                                       1.0 - std::max(0.0, grabEnv.fadeOutFraction));
-            out.fadeInFraction = std::clamp(grabEnv.fadeInFraction + dFrac, 0.0, std::max(0.0, hi));
-            break;
-        }
-        case EnvNode::FadeOutStart: {
-            if (dxPixels == 0) break;  // zero-motion grab: no param change, no division
-            // FadeOutStart sits at (1 - fadeOut) of the played span; dragging it LEFT (negative dx)
-            // lengthens the fade-out. So the fade-out fraction moves OPPOSITE the pixel delta.
-            const double playSeconds = std::max(0.0, grabEnv.lengthFraction) * totalSeconds;
-            const double dFrac = playSeconds > 0.0 ? -dSec / playSeconds : 0.0;
-            const double hi = std::min(bounds.maxFadeOutFraction,
-                                       1.0 - std::max(0.0, grabEnv.fadeInFraction));
-            out.fadeOutFraction = std::clamp(grabEnv.fadeOutFraction + dFrac, 0.0, std::max(0.0, hi));
-            break;
-        }
-        case EnvNode::LengthEnd: {
-            // LengthEnd sits at lengthFraction of the WHOLE sample; X maps to a fraction of it.
-            const double dFrac = totalSeconds > 0.0 ? dSec / totalSeconds : 0.0;
-            out.lengthFraction = std::clamp(grabEnv.lengthFraction + dFrac, 0.0, bounds.maxLengthFraction);
-            break;
-        }
-
-        case EnvNode::Origin:
             case EnvNode::ReleaseStart:
-            break;  // unreachable (isDraggable filtered above), kept for switch exhaustiveness
+                // The release runs from this node to the anchored right edge, so dragging LEFT
+                // (negative dx) lengthens it — the delta enters with the opposite sign.
+                out.releaseSeconds =
+                    std::clamp(grabEnv.releaseSeconds - gateDSec, 0.0, bounds.maxReleaseSeconds);
+                break;
+            case EnvNode::AttackCurve:
+                out.attackCurve =
+                    curveFromKnotDrag(grabEnv, node, grabEnv.attackCurve, rect, dyPixels);
+                break;
+            case EnvNode::DecayCurve:
+                out.decayCurve =
+                    curveFromKnotDrag(grabEnv, node, grabEnv.decayCurve, rect, dyPixels);
+                break;
+            case EnvNode::ReleaseCurve:
+                out.releaseCurve =
+                    curveFromKnotDrag(grabEnv, node, grabEnv.releaseCurve, rect, dyPixels);
+                break;
+            default:
+                break;
+        }
+        return out;
+    }
+
+    // AHD: the x-axis is the waveform's own, so a stage node moves at 1:1 wall-clock scale.
+    const AhdSplit s = splitAhdSeconds(grabEnv);
+    switch (node) {
+        case EnvNode::AttackEnd:
+            out.attackSeconds =
+                std::clamp(grabEnv.attackSeconds + dSec, 0.0, bounds.maxAttackSeconds);
+            break;
+        case EnvNode::HoldEnd: {
+            // Hold is a fraction of what attack and decay left, so the node's pixel motion
+            // converts through that remainder. A zero remainder leaves nothing to divide by and
+            // nothing the drag could express.
+            const double rem = std::max(0.0, grabEnv.spanSeconds) - s.attack - s.decay;
+            if (rem <= 0.0) break;
+            out.holdFraction = clamp01((s.hold + dSec) / rem);
+            break;
+        }
+        case EnvNode::DecayEnd:
+            out.decaySeconds =
+                std::clamp(grabEnv.decaySeconds + dSec, 0.0, bounds.maxDecaySeconds);
+            break;
+        case EnvNode::AttackCurve:
+            out.attackCurve =
+                curveFromKnotDrag(grabEnv, node, grabEnv.attackCurve, rect, dyPixels);
+            break;
+        case EnvNode::DecayCurve:
+            out.decayCurve = curveFromKnotDrag(grabEnv, node, grabEnv.decayCurve, rect, dyPixels);
+            break;
+        default:
+            break;
     }
     return out;
 }

src/core/instrument/ui/envelope_edit.h

@@ -1,19 +1,21 @@
 // envelope_edit.h — node hit-test + pixel-delta -> clamped-param inverse map for the draggable
-// envelope nodes. Mirror of card_drag/waveform_view: drag arithmetic lives here, unit-tested
+// envelope nodes and their mid-segment curve knots. Mirror of card_drag/waveform_view: drag
-// outside the DAW; the shell draws handles, captures the grab, and feeds pixel deltas back in.
+// arithmetic lives here, unit-tested outside the DAW; the shell draws handles, captures the
+// grab, and feeds pixel deltas back in.
 //
 // envelope_overlay owns the params->polyline forward (draw) map; this module owns the inverse
-// (edit) map + hit-test. Both read/write the same AmpEnvelope fields (shell re-reads the one
+// (edit) map + hit-test. Both read/write the same StageEnvelope fields (the shell re-reads the
-// parameter set every paint), so a node drag and a slider edit are two views on one source of
+// one parameter set every paint), so a node drag, a knot drag, and a knob edit are three views
-// truth.
+// on one source of truth — structurally, not through a listener chain.
 //
-// A drag can never produce a param a slider couldn't: nodes are monotonic in time (clamped
+// A drag can never produce a param a knob couldn't: time nodes are range-clamped to the same
-// between time predecessor/successor) and range-clamped to the same per-param [min,max] the
+// per-param [min,max] the knobs enforce (EnvClampBounds, caller-supplied since those maxima
-// slider uses (EnvClampBounds, caller-supplied since those maxima live shell-side).
+// live shell-side), and a knot resolves through curve_law's own exponent domain.
 //
-// Time-only nodes drag on X; DecayEnd (the sustain node) drags on both axes (X = decay time,
+// Time-only nodes drag on X; DecayEnd in an AHDSR drags on both axes (X = decay time, Y =
-// Y = sustain level). Origin and the drawing-only ReleaseStart are not draggable. A node is only
+// sustain level); a curve knot drags on Y alone. Origin is never draggable, and neither is an
-// editable in its own mode (Gate nodes ignore drags in Trigger mode and vice versa).
+// AHDSR's ReleaseEnd — it is anchored to the right edge, and release is dragged from
+// ReleaseStart instead. A node is only editable in its own kind.
 
 #pragma once
 
@@ -21,7 +23,7 @@
 #include <vector>
 
 #include "core/instrument/ui/editor_geometry.h"    // Rect
-#include "core/instrument/ui/envelope_overlay.h"   // EnvNode, EnvMode, AmpEnvelope, EnvVertex, timeToX/levelToY
+#include "core/instrument/ui/envelope_overlay.h"   // EnvNode, EnvKind, StageEnvelope, EnvVertex
 
 namespace reasampler::instrument::ui {
 
@@ -29,45 +31,40 @@ namespace reasampler::instrument::ui {
 // kMarkerGrabWidth.
 inline constexpr int kNodeGrabRadius = 6;
 
-// Per-param clamp bounds the shell supplies — the same maxima its sliders map [0,1] onto.
+// Per-param clamp bounds the shell supplies — the same maxima its knobs map [0,1] onto.
-// Lower bound is always 0; the monotonic-in-time constraint tightens further at edit time.
+// Lower bound is always 0. Defaults are placeholders; the shell overrides with its live domain.
-// Defaults are placeholders; the shell overrides with its live slider domain.
 struct EnvClampBounds {
     double maxAttackSeconds  = 4.0;
     double maxHoldSeconds    = 4.0;
     double maxDecaySeconds   = 4.0;
     double maxReleaseSeconds = 4.0;
-    double maxFadeInFraction  = 1.0;
+    // sustainLevel is always [0,1] and the hold FRACTION is always [0,1] — no shell knob needed.
-    double maxFadeOutFraction = 1.0;
-    double maxLengthFraction  = 1.0;
-    // sustainLevel is always [0,1] — no shell knob needed.
 };
 
 // Which node a grab at (x, y) lands on, given the current envelope/rect/duration (the same
-// inputs buildEnvelopePolyline drew from). `hit` is false for a point off every draggable node;
+// inputs buildEnvelopePolyline drew from). `hit` is false for a point off every draggable node.
-// Origin/ReleaseStart and nodes from the other mode never hit. Nearest node within the radius
+// Nearest node within the radius wins (Chebyshev distance); an exact tie goes to the earlier
-// wins (Chebyshev distance); an exact tie goes to the earlier draw-order node — this only matters
+// draw-order node, and since knots are appended last, a coincident endpoint handle wins over a
-// for Trigger's zero-fade-out coincidence (FadeOutStart overlaps LengthEnd and wins, so the fade
+// knot rather than the drag silently becoming a curve edit.
-// can be dragged open from zero). Gate nodes never coincide (forward map enforces
-// kGateNodeSepPx), so every Gate handle is independently grabbable.
 struct NodeHit {
     bool    hit  = false;
     EnvNode node = EnvNode::Origin;  // meaningful only when hit == true
 };
 // Takes the waveform overlay (not a lane) — see waveform_view.h's overlay contract.
-NodeHit nodeAtPoint(const AmpEnvelope& env, const OverlayArea& area, double totalSeconds, int x,
+NodeHit nodeAtPoint(const StageEnvelope& env, const OverlayArea& area, double totalSeconds,
-                    int y);
+                    int x, int y);
 
-// Resolves a drag of `node` to a new AmpEnvelope. `grabEnv` is the envelope as of grab time (the
+// Resolves a drag of `node` to a new StageEnvelope. `grabEnv` is the envelope as of grab time
-// shell snapshots it on button-down so the delta is absolute, not accumulated); `dxPixels`/
+// (the shell snapshots it on button-down so the delta is absolute, not accumulated);
-// `dyPixels` is the pixel delta since grab.
+// `dxPixels`/`dyPixels` is the pixel delta since grab.
-//   * X delta -> the node's time param, shifted via the same linear map as timeToX, clamped to
+//   * X delta -> the node's time param, at the same scale the forward map drew it, clamped to
-//     [0, per-param max] and to its monotonic-in-time neighbours.
+//     [0, per-param max].
-//   * Y delta -> the level param, only for DecayEnd; clamped to [0,1]. Ignored for time-only nodes.
+//   * Y delta -> the level param (AHDSR DecayEnd's sustain) or, on a knot, the segment's curve
-//   * A non-draggable node, an other-mode node, a zero-size area, or totalSeconds <= 0 returns
+//     exponent. Ignored for time-only nodes.
+//   * A non-draggable node, an other-kind node, a zero-size area, or totalSeconds <= 0 returns
 //     `grabEnv` unchanged.
 // Only the dragged node's param(s) change. Pure.
-AmpEnvelope resolveNodeDrag(const AmpEnvelope& grabEnv, EnvNode node, const OverlayArea& area,
+StageEnvelope resolveNodeDrag(const StageEnvelope& grabEnv, EnvNode node, const OverlayArea& area,
                               double totalSeconds, const EnvClampBounds& bounds,
                               int dxPixels, int dyPixels);
 

src/core/instrument/ui/envelope_overlay.cpp

@@ -9,6 +9,8 @@
 namespace reasampler::instrument::ui {
 
 using util::clamp01;
+using util::curveMap;
+using util::curveMidLevel;
 
 int timeToX(const Rect& area, double totalSeconds, double t) {
     const int w = std::max(0, area.width);
@@ -21,20 +23,14 @@ int timeToX(const Rect& area, double totalSeconds, double t) {
     return area.x + static_cast<int>(px + 0.5);
 }
 
-int gateTimedWidth(const Rect& area) {
-    const int w = std::max(0, area.width);
-    if (w <= 0) return 0;
-    const int sustainPx =
-        static_cast<int>(kGateSustainDisplayFraction * static_cast<double>(w) + 0.5);
-    return std::max(1, w - sustainPx);
-}
-
 double gatePxPerSecond(const Rect& area) {
-    const int timedW = gateTimedWidth(area);
+    const int w = std::max(0, area.width);
-    if (timedW <= 0) return 0.0;
+    if (w <= 0) return 0.0;
-    // Minus the four per-segment separation bases and the last in-bounds column, floored at 1.
+    // The four timed stages share the canvas minus their four separation bases and the last
-    const double usable =
+    // in-bounds column; whatever they leave IS the sustain plateau, which is why a zero release
-        std::max(1.0, static_cast<double>(timedW - 1 - 4 * kGateNodeSepPx));
+    // puts the plateau's end one separation short of the right edge rather than a fixed
+    // fraction of the way across.
+    const double usable = std::max(1.0, static_cast<double>(w - 1 - 4 * kGateNodeSepPx));
     return usable / (4.0 * kGateStageMaxSeconds);
 }
 
@@ -50,20 +46,37 @@ int levelToY(const Rect& area, double level) {
     return area.y + static_cast<int>(dy);
 }
 
+AhdSplit splitAhdSeconds(const StageEnvelope& env) {
+    AhdSplit out;
+    const double span = std::max(0.0, env.spanSeconds);
+    double a = std::max(0.0, env.attackSeconds);
+    if (a > span) a = span;
+    double d = std::max(0.0, env.decaySeconds);
+    if (d > span - a) d = span - a;
+    const double remaining = span - a - d;
+    out.attack = a;
+    out.decay = d;
+    out.hold = remaining * clamp01(env.holdFraction);
+    out.total = out.attack + out.hold + out.decay;
+    return out;
+}
+
 namespace {
 
-EnvVertex vtx(EnvNode node, const Rect& area, double totalSeconds, double t, double level) {
+EnvVertex vtx(EnvNode node, const Rect& area, double totalSeconds, double t, double level,
+              bool knot = false) {
     EnvVertex v;
     v.node = node;
     v.x = timeToX(area, totalSeconds, t);
     v.y = levelToY(area, level);
     v.level = level;
+    v.knot = knot;
     return v;
 }
 
-// Gate works in px space (timed px + the fixed sustain-plateau reserve) rather than the plain
+// The AHDSR schematic works in px space rather than the plain timeToX map; clamps in double
-// timeToX map; clamps in double space before the int cast for the same overflow reason as above.
+// space before the int cast for the same overflow reason as timeToX.
-EnvVertex gateVtx(EnvNode node, const Rect& area, double px, double level) {
+EnvVertex gateVtx(EnvNode node, const Rect& area, double px, double level, bool knot = false) {
     const int w = std::max(1, area.width);
     if (px < 0.0) px = 0.0;
     if (px > static_cast<double>(w - 1)) px = static_cast<double>(w - 1);
@@ -72,10 +85,27 @@ EnvVertex gateVtx(EnvNode node, const Rect& area, double px, double level) {
     v.x = area.x + static_cast<int>(px + 0.5);
     v.y = levelToY(area, level);
     v.level = level;
+    v.knot = knot;
     return v;
 }
 
-std::vector<EnvVertex> gatePolyline(const AmpEnvelope& env, const Rect& area) {
+// The knot for a segment running from `startLevel` to `endLevel`, placed at the segment's
+// pixel midpoint. Its level is the curve's own value at the segment midpoint, which is what
+// makes the knot's height and the inner dial two readings of one exponent.
+EnvVertex knotVtx(EnvNode node, const Rect& area, int x0, int x1, double startLevel,
+                  double endLevel, double exponent) {
+    const double u = curveMidLevel(exponent);
+    const double level = startLevel + (endLevel - startLevel) * u;
+    EnvVertex v;
+    v.node = node;
+    v.x = (x0 + x1) / 2;
+    v.y = levelToY(area, level);
+    v.level = level;
+    v.knot = true;
+    return v;
+}
+
+std::vector<EnvVertex> gatePolyline(const StageEnvelope& env, const Rect& area) {
     // Clamp defensively — a stored negative duration would be an upstream bug.
     const double a = std::max(0.0, env.attackSeconds);
     const double h = std::max(0.0, env.holdSeconds);
@@ -83,73 +113,87 @@ std::vector<EnvVertex> gatePolyline(const AmpEnvelope& env, const Rect& area) {
     const double r = std::max(0.0, env.releaseSeconds);
     const double sus = clamp01(env.sustainLevel);
 
-    // A/H/D/R map onto the timed region at the param-domain scale, each segment getting a
-    // kGateNodeSepPx base so nodes never coincide even at the tier-0 zero-hold/zero-decay
-    // defaults. The sustain plateau is the fixed reserve between DecayEnd and ReleaseStart.
     const int W = std::max(1, area.width);
-    const double sustainPx = static_cast<double>(W - gateTimedWidth(area));
     const double sep = static_cast<double>(kGateNodeSepPx);
     const double pps = gatePxPerSecond(area);
-
-    double xAttack  = sep + a * pps;              // AttackEnd
-    double xHold    = xAttack + sep + h * pps;    // HoldEnd
-    double xDecay   = xHold + sep + d * pps;      // DecayEnd (sustain node)
-    double xPlateau = xDecay + sustainPx;         // ReleaseStart (schematic note-off)
-    double xRelease = xPlateau + sep + r * pps;   // ReleaseEnd
-
-    // Overrun beyond the schematic domain compresses from the right, preserving minimum gaps so
-    // trailing nodes stay separated instead of piling on the last column. This re-floor only
-    // bites when the canvas is too narrow to hold the gaps at all — gateVtx's clamp wins then.
     const double xMax = static_cast<double>(W - 1);
-    if (xRelease > xMax) {
+
-        xRelease = xMax;
+    // The release ANCHORS to the right edge: ReleaseEnd is the canvas edge and ReleaseStart —
-        xPlateau = std::min(xPlateau, xRelease - sep);
+    // the sustain->release join, and the node the user drags — sits a release-length to its
-        xDecay   = std::min(xDecay, xPlateau - sustainPx);
+    // left. Everything the release does not take is the sustain plateau, so a zero release
+    // leaves the plateau running to within one separation of the edge.
+    double xAttack  = sep + a * pps;
+    double xHold    = xAttack + sep + h * pps;
+    double xDecay   = xHold + sep + d * pps;
+    double xPlateau = xMax - sep - r * pps;
+    const double xRelease = xMax;
+
+    // Keep every node separated when the four stages together would overrun the canvas: the
+    // plateau holds its minimum gap from the edge, then the A/H/D chain compresses from the
+    // right and re-floors from the left. This only bites at the domain's extremes; gateVtx's
+    // own clamp wins on a canvas too narrow to hold the gaps at all.
+    if (xPlateau < xDecay + sep) {
+        if (xPlateau < 4.0 * sep) xPlateau = 4.0 * sep;
+        xDecay  = std::min(xDecay, xPlateau - sep);
         xHold   = std::min(xHold, xDecay - sep);
         xAttack = std::min(xAttack, xHold - sep);
         xAttack = std::max(xAttack, sep);
         xHold   = std::max(xHold, xAttack + sep);
         xDecay  = std::max(xDecay, xHold + sep);
-        xPlateau = std::max(xPlateau, xDecay + sustainPx);
+        xPlateau = std::max(xPlateau, xDecay + sep);
-        xRelease = std::max(xRelease, xPlateau + sep);
     }
 
     std::vector<EnvVertex> pts;
-    pts.reserve(6);
+    pts.reserve(9);
     pts.push_back(gateVtx(EnvNode::Origin,       area, 0.0,      0.0));
     pts.push_back(gateVtx(EnvNode::AttackEnd,    area, xAttack,  1.0));
     pts.push_back(gateVtx(EnvNode::HoldEnd,      area, xHold,    1.0));
     pts.push_back(gateVtx(EnvNode::DecayEnd,     area, xDecay,   sus));  // sustain node
     pts.push_back(gateVtx(EnvNode::ReleaseStart, area, xPlateau, sus));  // plateau end
-    pts.push_back(gateVtx(EnvNode::ReleaseEnd,   area, xRelease, 0.0));
+    pts.push_back(gateVtx(EnvNode::ReleaseEnd,   area, xRelease, 0.0));  // anchored
+
+    // Knots ride only SLOPED stages that actually have a duration — a zero-length stage has no
+    // interior to place a handle in, and one there would collide with its own endpoints.
+    if (a > 0.0) {
+        pts.push_back(knotVtx(EnvNode::AttackCurve, area, pts[0].x, pts[1].x, 0.0, 1.0,
+                              env.attackCurve));
+    }
+    if (d > 0.0) {
+        pts.push_back(knotVtx(EnvNode::DecayCurve, area, pts[2].x, pts[3].x, 1.0, sus,
+                              env.decayCurve));
+    }
+    if (r > 0.0) {
+        pts.push_back(knotVtx(EnvNode::ReleaseCurve, area, pts[4].x, pts[5].x, sus, 0.0,
+                              env.releaseCurve));
+    }
     return pts;
 }
 
-std::vector<EnvVertex> triggerPolyline(const AmpEnvelope& env, const Rect& area,
+std::vector<EnvVertex> ahdPolyline(const StageEnvelope& env, const Rect& area,
                                    double totalSeconds) {
-    // Played span is lengthFraction of the whole sample; fades are fractions of that span.
+    const AhdSplit s = splitAhdSeconds(env);
-    const double len   = clamp01(env.lengthFraction);
+    const double t0 = std::max(0.0, env.originSeconds);
-    double fadeIn      = clamp01(env.fadeInFraction);
-    double fadeOut     = clamp01(env.fadeOutFraction);
-    // Fades cannot overlap; trim fade-out first, matching the engine's TriggerParams clamp.
-    if (fadeIn + fadeOut > 1.0) fadeOut = std::max(0.0, 1.0 - fadeIn);
-
-    const double playSeconds  = len * totalSeconds;
-    const double tFadeInEnd   = fadeIn * playSeconds;
-    const double tFadeOutStart = playSeconds - fadeOut * playSeconds;  // where fade-out begins
 
     std::vector<EnvVertex> pts;
-    pts.reserve(4);
+    pts.reserve(6);
-    pts.push_back(vtx(EnvNode::Origin,       area, totalSeconds, 0.0,           0.0));
+    pts.push_back(vtx(EnvNode::Origin,    area, totalSeconds, t0, 0.0));
-    pts.push_back(vtx(EnvNode::FadeInEnd,    area, totalSeconds, tFadeInEnd,    1.0));
+    pts.push_back(vtx(EnvNode::AttackEnd, area, totalSeconds, t0 + s.attack, 1.0));
-    pts.push_back(vtx(EnvNode::FadeOutStart, area, totalSeconds, tFadeOutStart, 1.0));  // unity end
+    pts.push_back(vtx(EnvNode::HoldEnd,   area, totalSeconds, t0 + s.attack + s.hold, 1.0));
-    pts.push_back(vtx(EnvNode::LengthEnd,    area, totalSeconds, playSeconds,   0.0));  // playEnd
+    pts.push_back(vtx(EnvNode::DecayEnd,  area, totalSeconds, t0 + s.total, 0.0));
+    if (s.attack > 0.0) {
+        pts.push_back(knotVtx(EnvNode::AttackCurve, area, pts[0].x, pts[1].x, 0.0, 1.0,
+                              env.attackCurve));
+    }
+    if (s.decay > 0.0) {
+        pts.push_back(knotVtx(EnvNode::DecayCurve, area, pts[2].x, pts[3].x, 1.0, 0.0,
+                              env.decayCurve));
+    }
     return pts;
 }
 
 }  // namespace
 
-std::vector<EnvVertex> buildEnvelopePolyline(const AmpEnvelope& env, const OverlayArea& area,
+std::vector<EnvVertex> buildEnvelopePolyline(const StageEnvelope& env, const OverlayArea& area,
                                              double totalSeconds) {
     const Rect& rect = area.rect;
     if (rect.width <= 0 || rect.height <= 0 || totalSeconds <= 0.0) {
@@ -157,8 +201,8 @@ std::vector<EnvVertex> buildEnvelopePolyline(const AmpEnvelope& env, const Overl
         return {vtx(EnvNode::Origin, rect, 1.0, 0.0, 0.0),
                 vtx(EnvNode::ReleaseEnd, rect, 1.0, 1.0, 0.0)};
     }
-    return env.mode == EnvMode::Gate ? gatePolyline(env, rect)
+    return env.kind == EnvKind::Ahdsr ? gatePolyline(env, rect)
-                                     : triggerPolyline(env, rect, totalSeconds);
+                                      : ahdPolyline(env, rect, totalSeconds);
 }
 
 }  // namespace reasampler::instrument::ui

src/core/instrument/ui/envelope_overlay.h

@@ -1,8 +1,7 @@
-// envelope_overlay.h — amp-envelope -> polyline geometry for the Sample-view envelope overlay.
+// envelope_overlay.h — staged-envelope -> polyline geometry for the Sample-view overlay.
 // Engine-free by design (no sample_map/sampler_core dependency); mirror of waveform_view /
-// param_slider. The shell packs the one parameter set's AdsrSeconds/TriggerParams into
+// param_slider. The shell packs whichever envelope is overlay-active into StageEnvelope and
-// AmpEnvelope and draws the polyline plus a handle at each node (envelope_edit does the
+// draws the polyline plus a handle at each node (envelope_edit does the hit-test).
-// hit-test).
 
 #pragma once
 
@@ -10,92 +9,98 @@
 #include <vector>
 
 #include "core/instrument/ui/editor_geometry.h"  // Rect — the shared geometry idiom
+#include "core/util/curve_law.h"                 // the ONE per-segment curve law
 
 namespace reasampler::instrument::ui {
 
-// Local mirror of sampler_core's PlayMode, kept here so this module stays engine-free.
+// Which LAYOUT POLICY an envelope takes, decided by whether it has a sustain stage rather
-enum class EnvMode { Gate, Trigger };
+// than by which processor it modulates. A gated (AHDSR) envelope right-anchors its release so
+// the sustain plateau reads full-width; a sustain-less (AHD) one maps 1:1 onto the waveform's
+// own time axis, which only means anything for a trigger shape. The two policies coexist.
+enum class EnvKind { Ahdsr, Ahd };
 
 // Gate nodes: Origin -> AttackEnd -> HoldEnd -> DecayEnd(sustain) -> ReleaseStart -> ReleaseEnd.
-// Trigger nodes: Origin -> FadeInEnd -> FadeOutStart -> LengthEnd(playEnd).
+// AHD nodes:  Origin -> AttackEnd -> HoldEnd -> DecayEnd.
-// Shared by envelope_overlay (forward/draw map) and envelope_edit (inverse/edit map).
+// The three *Curve nodes are the round mid-segment knots whose vertical drag sets that
+// segment's curve exponent. Shared by envelope_overlay (forward/draw) and envelope_edit
+// (inverse/edit).
 enum class EnvNode {
     Origin,        // t=0, level 0 — not draggable
-    AttackEnd,     // Gate: attack ramp top — sets attackSeconds
+    AttackEnd,     // attack ramp top — sets attackSeconds
-    HoldEnd,       // Gate: hold plateau end — sets holdSeconds
+    HoldEnd,       // hold plateau end — AHDSR: holdSeconds; AHD: holdFraction
-    DecayEnd,      // Gate: decay settles to sustain — sets decaySeconds (X) and sustainLevel (Y)
+    DecayEnd,      // AHDSR: decay settles to sustain (X = decay, Y = sustain); AHD: decay end
-    ReleaseStart,  // Gate: sustain plateau end — drawing-only, not draggable
+    ReleaseStart,  // AHDSR: sustain plateau end — sets releaseSeconds (drags on X, inverted)
-    ReleaseEnd,    // Gate: release tail end — sets releaseSeconds
+    ReleaseEnd,    // AHDSR: the envelope's end point — ANCHORED to the right edge, not draggable
-    FadeInEnd,     // Trigger: fade-in top — sets fadeInFraction
+    AttackCurve,   // mid-attack knot — sets attackCurve
-    FadeOutStart,  // Trigger: fade-out start — sets fadeOutFraction
+    DecayCurve,    // mid-decay knot — sets decayCurve
-    LengthEnd,     // Trigger: playEnd terminal — sets lengthFraction
+    ReleaseCurve,  // mid-release knot — sets releaseCurve (AHDSR only)
 };
 
-// Amp-envelope params the overlay draws. Trigger's fadeIn/fadeOutFraction are derived from
+// The envelope the overlay draws. One struct for both policies: `kind` selects which fields
-// TriggerParams' frame counts, not a direct field copy — see the trigger_seam gotcha in
+// are read, so a single pack/unpack pair serves the amp, pitch, and filter envelopes.
-// core/instrument/CLAUDE.md.
+struct StageEnvelope {
-struct AmpEnvelope {
+    EnvKind kind = EnvKind::Ahdsr;
-    EnvMode mode = EnvMode::Gate;
 
-    // Gate (AHDSR): seconds, plus a dimensionless sustain level.
+    // AHDSR: seconds at the schematic param-domain scale, plus a dimensionless sustain level.
     double attackSeconds  = 0.003;
     double holdSeconds    = 0.0;
     double decaySeconds   = 0.0;
     double sustainLevel   = 1.0;
     double releaseSeconds = 0.060;
 
-    // Trigger: fractions of the played span.
+    // AHD: attack/decay seconds plus the Hold FRACTION of the span left after them, laid over
-    double lengthFraction  = 1.0;
+    // [originSeconds, originSeconds + spanSeconds) of the waveform's own time axis.
-    double fadeInFraction  = 0.0;
+    double holdFraction  = 1.0;
-    double fadeOutFraction = 0.0;
+    double originSeconds = 0.0;
+    double spanSeconds   = 0.0;
+
+    // Per-segment curve exponents (release is AHDSR-only). curve_law.h owns the domain.
+    double attackCurve  = util::kCurveNeutral;
+    double decayCurve   = util::kCurveNeutral;
+    double releaseCurve = util::kCurveNeutral;
 };
 
-// One polyline vertex: pixel point plus which node it is. level is redundant with y, carried for
+// One polyline vertex: pixel point plus which node it is. `level` is redundant with y, carried
-// inspection.
+// for inspection. `knot` marks the round mid-segment curve handles, which draw differently and
+// are not part of the traced line.
 struct EnvVertex {
     EnvNode node = EnvNode::Origin;
     int x = 0;
     int y = 0;
     double level = 0.0;
+    bool knot = false;
 
     bool operator==(const EnvVertex& o) const {
-        return node == o.node && x == o.x && y == o.y && level == o.level;
+        return node == o.node && x == o.x && y == o.y && level == o.level && knot == o.knot;
     }
 };
 
-// Fraction of canvas width reserved for the Gate sustain-plateau display; the remaining width
+// Minimum pixel separation between consecutive AHDSR nodes, so zero-duration stages (tier-0
-// carries A/H/D/R at the param-domain scale. Shared with envelope_edit.
-inline constexpr double kGateSustainDisplayFraction = 0.15;
-
-// Minimum pixel separation between consecutive Gate nodes, so zero-duration stages (tier-0
 // defaults) still render as distinct, grabbable handles. Larger than envelope_edit's grab
 // radius (6) so a click can never tie between neighbours.
 inline constexpr int kGateNodeSepPx = 8;
 
-// Gate schematic's per-stage time domain (seconds) — the timed region represents four stages
+// The AHDSR schematic's per-stage time domain (seconds) — the four timed stages A/H/D/R each
-// end-to-end at this max each. Must match the shell's stage-slider ceiling so a maxed slider
+// span at most this. Must match the shell's stage-knob ceiling so a maxed knob lands exactly at
-// lands exactly at the canvas edge.
+// the canvas edge (at which point the sustain plateau has shrunk to nothing).
 inline constexpr double kGateStageMaxSeconds = 2.0;
 
-// Pixel width of the Gate timed region (area width minus the sustain reserve), floored at 1 for
+// Pixels per second of the AHDSR schematic, independent of the sample's actual duration.
-// a non-empty area; 0 for a zero/negative-width area.
-int gateTimedWidth(const Rect& area);
-
-// Pixels per second of the Gate timed region, independent of the sample's actual duration.
 // Shared by buildEnvelopePolyline and envelope_edit's drag inverse so a dragged handle tracks
 // the cursor 1:1.
 double gatePxPerSecond(const Rect& area);
 
-// Maps an amp envelope to polyline vertices inside `area` over a sample of `totalSeconds`
+// Maps a staged envelope to polyline vertices inside `area` over a sample of `totalSeconds`
-// duration. y maps level [0,1] across [area.bottom()-1, area.y] (level 1 at the top); vertices
+// duration. y maps level [0,1] across [area.bottom()-1, area.y] (level 1 at the top); the
-// are in draw order, Origin first.
+// traced vertices come first in draw order (Origin first), then the curve knots.
 //
-// Gate's x-axis is a bounded schematic independent of totalSeconds (does NOT line up with the
+// The AHDSR x-axis is a bounded schematic independent of totalSeconds (it does NOT line up with
-// waveform under it); Trigger's x-axis is PCM-aligned wall-clock. Every vertex is clamped inside
+// the waveform under it) with its ReleaseEnd anchored to the right edge; the AHD x-axis is
-// the canvas: x in [area.x, area.right()-1], y in [area.y, area.bottom()-1]. A degenerate area
+// wall-clock, 1:1 with the waveform. Every vertex is clamped inside the canvas: x in
-// or totalSeconds <= 0 yields the flat two-point baseline [Origin, end at level 0]. Takes the
+// [area.x, area.right()-1], y in [area.y, area.bottom()-1]. A degenerate area or
+// totalSeconds <= 0 yields the flat two-point baseline [Origin, end at level 0]. Takes the
 // waveform overlay (not a lane) — see waveform_view.h's overlay contract.
-std::vector<EnvVertex> buildEnvelopePolyline(const AmpEnvelope& env, const OverlayArea& area,
+std::vector<EnvVertex> buildEnvelopePolyline(const StageEnvelope& env, const OverlayArea& area,
                                              double totalSeconds);
 
 // Maps a time (seconds) to a pixel x inside `area`, linear and clamped at both ends. Shared
@@ -106,4 +111,16 @@ int timeToX(const Rect& area, double totalSeconds, double t);
 // clamped. Shared with envelope_edit's node hit-test.
 int levelToY(const Rect& area, double level);
 
+// The A/H/D split of an AHD's span, in seconds — the pure-UI mirror of the engine's fitAhd, so
+// the drawn stage boundaries land where the voice actually puts them. Attack takes at most the
+// span and Decay at most what Attack left, so Hold's fraction of the remainder can never push
+// the sum past the span; there is no clamp on the sum because none is possible.
+struct AhdSplit {
+    double attack = 0.0;
+    double hold   = 0.0;
+    double decay  = 0.0;
+    double total  = 0.0;
+};
+AhdSplit splitAhdSeconds(const StageEnvelope& env);
+
 }  // namespace reasampler::instrument::ui

src/core/instrument/ui/knob_deck.cpp

@@ -20,10 +20,11 @@ int knobRowWidth(const DeckGroupDesc& g) {
     return w;
 }
 
-// The caption-row width: the caption reserve plus the optional caption toggle.
+// The caption-row width: the caption reserve plus the optional caption toggle and radio.
 int captionRowWidth(const DeckGroupDesc& g) {
     int w = g.captionWidth;
     if (g.captionToggle.id >= 0) w += kDeckToggleGap + 2 * g.captionToggle.segWidth;
+    if (g.captionRadio.id >= 0) w += kDeckToggleGap + kDeckRadioSize;
     return w;
 }
 
@@ -37,12 +38,22 @@ DeckGroupLayout layoutGroup(const DeckGroupDesc& g, const Rect& box) {
     const int innerLeft = box.x + kDeckGroupPadX;
     const int innerRight = box.right() - kDeckGroupPadX;
 
-    // Caption row: text left, compact toggle right-anchored.
+    // Caption row: text left, then the compact toggle, then the corner radio at the far edge.
     out.caption = Rect::ltrb(innerLeft, captionTop, innerRight, captionTop + kDeckCaptionH);
+    int captionRight = innerRight;
+    if (g.captionRadio.id >= 0) {
+        const int radioTop = captionTop + (kDeckCaptionH - kDeckRadioSize) / 2;
+        out.captionRadio = DeckRadioLayout{
+            g.captionRadio.id, Rect::ltrb(innerRight - kDeckRadioSize, radioTop, innerRight,
+                                          radioTop + kDeckRadioSize)};
+        captionRight = out.captionRadio.box.x - kDeckToggleGap;
+        out.caption.width = captionRight - out.caption.x;
+    }
     if (g.captionToggle.id >= 0) {
         const int segW = g.captionToggle.segWidth;
         const int togTop = captionTop + (kDeckCaptionH - kDeckToggleH) / 2;
-        const Rect seg1 = Rect::ltrb(innerRight - segW, togTop, innerRight, togTop + kDeckToggleH);
+        const Rect seg1 = Rect::ltrb(captionRight - segW, togTop, captionRight,
+                                     togTop + kDeckToggleH);
         const Rect seg0 = Rect::ltrb(seg1.x - segW, togTop, seg1.x, togTop + kDeckToggleH);
         out.captionToggle = DeckToggleLayout{g.captionToggle.id, seg0, seg1};
         // Caption text stops at the toggle: pull the right edge in (XYWH: shrink width).
@@ -59,6 +70,10 @@ DeckGroupLayout layoutGroup(const DeckGroupDesc& g, const Rect& box) {
         const int knobLeft = x + (kDeckCellW - kDeckKnobSize) / 2;
         const int knobTop = cellTop + 4;
         c.knob = Rect::ltrb(knobLeft, knobTop, knobLeft + kDeckKnobSize, knobTop + kDeckKnobSize);
+        const int innerLeftPx = knobLeft + (kDeckKnobSize - kDeckInnerDialSize) / 2;
+        const int innerTopPx = knobTop + (kDeckKnobSize - kDeckInnerDialSize) / 2;
+        c.inner = Rect::ltrb(innerLeftPx, innerTopPx, innerLeftPx + kDeckInnerDialSize,
+                             innerTopPx + kDeckInnerDialSize);
         const int labelTop = knobTop + kDeckKnobSize + 4;
         c.label = Rect::ltrb(c.cell.x, labelTop, c.cell.right(), labelTop + kDeckCellLabelH);
         out.cells.push_back(c);
@@ -133,6 +148,9 @@ DeckLayout layoutDeck(const std::vector<DeckGroupDesc>& groups, int left, int to
 DeckHit hitTestDeck(const DeckLayout& layout, int x, int y) {
     for (const DeckGroupLayout& g : layout.groups) {
         if (!contains(g.box, x, y)) continue;
+        if (g.captionRadio.id >= 0 && contains(g.captionRadio.box, x, y)) {
+            return {DeckHitKind::CaptionRadio, g.captionRadio.id, -1, false};
+        }
         if (g.captionToggle.id >= 0) {
             if (contains(g.captionToggle.seg0, x, y))
                 return {DeckHitKind::CaptionToggle, g.captionToggle.id, 0};
@@ -146,7 +164,9 @@ DeckHit hitTestDeck(const DeckLayout& layout, int x, int y) {
                 return {DeckHitKind::RowToggle, g.rowToggle.id, 1};
         }
         for (const DeckCellLayout& c : g.cells) {
-            if (c.id >= 0 && contains(c.cell, x, y)) return {DeckHitKind::Knob, c.id, -1};
+            if (c.id >= 0 && contains(c.cell, x, y)) {
+                return {DeckHitKind::Knob, c.id, -1, contains(c.inner, x, y)};
+            }
         }
         return {};  // inside the box but on fence/padding/blank — a miss (groups never overlap)
     }

src/core/instrument/ui/knob_deck.h

@@ -35,6 +35,11 @@ inline constexpr int kDeckCaptionGap = 2;     // caption row -> knob row gap
 inline constexpr int kDeckToggleGap = 4;      // caption text -> toggle / cells -> row toggle gap
 inline constexpr int kDeckGroupGap = 12;      // gap between groups on a row
 inline constexpr int kDeckRowGap = 8;         // gap between wrapped deck rows
+inline constexpr int kDeckRadioSize = 12;     // the caption-row corner radio square
+// The knob cell's INNER dial: a concentric sub-disc that edits a second, related value while
+// the outer ring keeps editing the cell's own. Geometry only — WHICH cells carry one is
+// deck_groups' call, so a cell without an inner value simply resolves an inner hit as a knob.
+inline constexpr int kDeckInnerDialSize = 14;
 // One group box: padding + caption + gap + cell row + padding.
 inline constexpr int kDeckGroupH =
     kDeckGroupPadY + kDeckCaptionH + kDeckCaptionGap + kDeckCellH + kDeckGroupPadY;
@@ -45,13 +50,20 @@ struct DeckToggleDesc {
     int segWidth = 44;  // px per segment
 };
 
+// A single-square corner radio (an exclusive selector across groups, so the group itself
+// carries no state). id -1 = absent.
+struct DeckRadioDesc {
+    int id = -1;
+};
+
 // One fenced group, in deck order. `cellIds` are the knob cells left-to-right; an id of -1
 // is a reserved blank cell (geometry held, never hit). `captionWidth` is the px the shell
 // reserves for the caption text (this module does not measure text).
 struct DeckGroupDesc {
     int id = 0;                    // shell group id (opaque here)
     int captionWidth = 60;
-    DeckToggleDesc captionToggle;  // right-anchored in the caption row; id -1 = none
+    DeckRadioDesc captionRadio;    // the caption row's far corner; id -1 = none
+    DeckToggleDesc captionToggle;  // caption row, left of the radio; id -1 = none
     std::vector<int> cellIds;      // knob cells; -1 = blank reserve
     DeckToggleDesc rowToggle;      // in the knob row after the cells; id -1 = none
 };
@@ -64,10 +76,16 @@ struct DeckToggleLayout {
     Rect seg1;  // right segment
 };
 
+struct DeckRadioLayout {
+    int id = -1;
+    Rect box;
+};
+
 struct DeckCellLayout {
     int id = -1;
     Rect cell;   // the full 48x58 cell
     Rect knob;   // the centered kDeckKnobSize square (the knob circle inscribes it)
+    Rect inner;  // the concentric kDeckInnerDialSize square inside `knob`
     Rect label;  // the 12px label band beneath the knob
 };
 
@@ -75,6 +93,7 @@ struct DeckGroupLayout {
     int id = 0;
     Rect box;                       // the fenced group box
     Rect caption;                   // caption text rect (left part of the caption row)
+    DeckRadioLayout captionRadio;   // id -1 when absent (rect empty)
     DeckToggleLayout captionToggle; // id -1 when absent (rects empty)
     std::vector<DeckCellLayout> cells;
     DeckToggleLayout rowToggle;     // id -1 when absent
@@ -105,17 +124,19 @@ DeckLayout layoutDeck(const std::vector<DeckGroupDesc>& groups, int left, int to
 
 // --- Hit-test --------------------------------------------------------------------------
 
-enum class DeckHitKind { None, Knob, CaptionToggle, RowToggle };
+enum class DeckHitKind { None, Knob, CaptionToggle, RowToggle, CaptionRadio };
 
 struct DeckHit {
     DeckHitKind kind = DeckHitKind::None;
-    int id = -1;       // the control id of the hit element (cell id / toggle id)
+    int id = -1;       // the control id of the hit element (cell id / toggle id / radio id)
     int segment = -1;  // 0/1 for a toggle hit; -1 otherwise
+    bool inner = false;  // Knob hits only: the grab landed on the cell's inner dial
 };
 
 // The deck element a point lands on: a knob cell (the whole cell, not just the knob
-// circle — the shell anchors the vertical drag wherever the grab lands), a caption-toggle
+// circle — the shell anchors the vertical drag wherever the grab lands, with `inner` marking
-// segment, or a row-toggle segment. Blank cells (id -1) and everything else miss.
+// a grab on the concentric inner dial), a caption-toggle segment, a row-toggle segment, or
+// the caption-row corner radio. Blank cells (id -1) and everything else miss.
 DeckHit hitTestDeck(const DeckLayout& layout, int x, int y);
 
 }  // namespace reasampler::instrument::ui

src/core/util/CLAUDE.md

@@ -3,12 +3,19 @@
 ## Scope
 
 Tiny, dependency-free pure helpers linked by both artifacts: whole-file byte
-loading, unit-interval clamping, and the absolute-path rejection test.
+loading, unit-interval clamping, the absolute-path rejection test, and the
+per-segment envelope curve law.
 
 ## Modules
 
 - `file_bytes` (`core/util`) — the ONE whole-file byte loader (Q-W1), linked by both artifacts; blocking I/O, off-audio-thread only.
 - `clamp01` (`core/util`, header-only) — the ONE unit-interval clamp (Q-W1), replacing four per-module static copies; NaN passes through unchanged rather than collapsing to a bound.
+- `curve_law` (`core/util`, header-only) — the ONE per-segment envelope curve law: the
+  exponent domain (0.1..10, neutral 1.0), the normalized-position -> normalized-level map, and
+  the mid-segment inverse an overlay knot drags through. Header-only and dependency-free so
+  the engine's evaluator, the overlay's forward map, its inverse, and the deck's inner dial all
+  read one law instead of four copies. **The neutral exponent is the IDENTITY, bit for bit** —
+  that is what makes an instance saved before curves existed play unchanged.
 - `relative_path` (`core/util`, header-only) — the ONE absolute-path rejection test behind the relative-paths-only invariant, shared by `bank_model` (`Sample.relativePath`) and `core/tracking/origin_ledger` (`OriginRecord.relativePath`). The two must reject identically or a path one accepts could be smuggled past the other; that is why it is one function and not two.
 
 ## Gotchas

src/core/util/CMakeLists.txt

@@ -1,2 +1,7 @@
 reasampler_pure_library(file_bytes SOURCES file_bytes.cpp)
 reasampler_test(file_bytes LINK file_bytes)
+
+# The per-segment envelope curve law is header-only, hence INTERFACE.
+add_library(curve_law INTERFACE)
+target_include_directories(curve_law INTERFACE ${REASAMPLER_SRC_DIR})
+reasampler_test(curve_law LINK curve_law)

src/core/util/curve_law.h

@@ -0,0 +1,47 @@
+#pragma once
+// curve_law — the ONE per-segment envelope curve law: the exponent domain, the map from a
+// stage's normalized position to its normalized level, and the mid-segment inverse the
+// overlay knot drags through. Header-only and dependency-free so the engine evaluator, the
+// overlay's forward map, and its inverse all read the same law rather than three copies.
+
+#include <cmath>
+
+namespace reasampler::util {
+
+// The per-segment curve is exponential: level = phi^exponent over the stage's normalized
+// position phi. 1.0 is the LINEAR neutral (phi^1 == phi), which is why a pre-existing
+// instance loading at 1.0 plays exactly as it did.
+inline constexpr double kCurveNeutral = 1.0;
+inline constexpr double kCurveMin = 0.1;
+inline constexpr double kCurveMax = 10.0;
+
+// Normalized position -> normalized level. The neutral exponent is compared EXACTLY so the
+// at-rest per-sample path pays one predicted branch instead of a transcendental; every
+// positive exponent maps 0 -> 0 and 1 -> 1, so a curved stage can never overshoot its own
+// endpoint levels.
+inline double curveMap(double phi, double exponent) {
+    if (exponent == kCurveNeutral) return phi;
+    return std::pow(phi, exponent);
+}
+
+inline double clampCurve(double exponent) {
+    if (!(exponent >= kCurveMin)) return kCurveMin;  // also catches NaN
+    return exponent > kCurveMax ? kCurveMax : exponent;
+}
+
+// The normalized level at a segment's MIDPOINT (phi = 0.5) — where the overlay places the
+// draggable curve knot — and its inverse. The pair is what keeps knot-drag and inner dial on
+// one value: both resolve through this law, not through each other.
+inline double curveMidLevel(double exponent) { return curveMap(0.5, clampCurve(exponent)); }
+
+// Mid-level -> exponent: u = 0.5^p, so p = ln(u)/ln(0.5). Out-of-domain u clamps to the
+// exponent endpoints rather than producing a non-finite exponent.
+inline double curveFromMidLevel(double midLevel) {
+    const double lo = curveMidLevel(kCurveMax);  // smallest reachable mid-level
+    const double hi = curveMidLevel(kCurveMin);  // largest
+    if (!(midLevel > lo)) return kCurveMax;      // also catches NaN
+    if (midLevel >= hi) return kCurveMin;
+    return clampCurve(std::log(midLevel) / std::log(0.5));
+}
+
+}  // namespace reasampler::util

src/shell/instrument/editor_controls.cpp

@@ -1,12 +1,14 @@
 // editor_controls.cpp — the ReaSamplerEditor's parameter plumbing: the band-stack layout
 // resolve every paint/hit-test path shares, the control-value domain maps (controlValue /
 // applyControl — seconds/fraction/frames <-> normalized 0..1), the control-id<->value binding
-// against the pure `deck_groups` module's descriptors, and the envelope pack/unpack (the
+// against the pure `deck_groups` module's descriptors, and the envelope pack/unpack (which
-// trigger-seam converter). Value logic only — no painting, no window plumbing.
+// stored struct each overlay selection maps onto). Value logic only — no painting, no window
+// plumbing.
 
 #include "shell/instrument/reasampler_editor.h"
 
 #include <algorithm>
+#include <cmath>    // log/exp (the curve knob's logarithmic travel)
 #include <cstdint>
 #include <cstdio>   // snprintf (deck value labels)
 #include <string>
@@ -14,17 +16,17 @@
 
 #include "core/instrument/engine/filter/filter_params.h"  // the filter's own control laws
 #include "core/instrument/engine/master_gain.h"  // master-gain dB<->linear<->knob taper
-#include "core/instrument/map/trigger_seam.h"    // triggerPlayLength / fade fraction converters
+#include "core/instrument/map/trigger_seam.h"    // triggerPlayLength (the Trigger play span)
 #include "core/instrument/ui/deck_groups.h"      // sampleDeckGroups (the deck's composition)
 #include "core/instrument/ui/knob_deck.h"        // deckHeight / kDeckKnobSize (the band's own height)
 #include "core/util/clamp01.h"
+#include "core/util/curve_law.h"                 // the ONE curve-exponent domain
 #include "shell/instrument/editor_internal.h"
 #include "shell/instrument/reasampler_processor.h"
 
 namespace reasampler::vst {
 
-using namespace reasampler::instrument::map;  // PlaySeconds vocabulary + trigger_seam converters
+using namespace reasampler::instrument::map;  // PlaySeconds vocabulary + trigger_seam
-using instrument::ui::EnvMode;                // envelope_overlay's mode enum
 using instrument::ui::computeSampleBands;
 using instrument::ui::chromeRects;
 using instrument::ui::deckHeight;
@@ -44,17 +46,26 @@ using util::clamp01;
 
 namespace {
 // Control-surface value domains (the shell owns these — param_slider is engine-free and maps
-// only 0..1). Wall-clock time sliders (AHDSR A/H/D/R, pitch env A/D) span [0, kEnvTimeMaxSeconds]
+// only 0..1). Every stage-time knob spans [0, kEnvTimeMaxSeconds] seconds — rate-free, exactly
-// seconds — rate-free, exactly what the parameter set stores; the build resolves seconds->frames
+// what the parameter set stores; the build resolves seconds->frames at the live rate. No knob
-// at the live rate. Source-timeline fade sliders (Trigger fade-in/out) store source frames
+// on this surface stores a source-frame count any more, so none needs a rate to draw.
-// (never a wall-clock second), but the knob's full-scale throw is a wall-clock intent —
+constexpr double kEnvTimeMaxSeconds = 2.0;            // every stage-time knob's ceiling (seconds)
-// kFadeMaxSeconds resolved against the live rate at use (fadeMaxFrames()) rather than a baked-in
+constexpr double kPitchDepthMaxSemis = 24.0;          // pitch depth throw: +/-24 st, centered
-// rate constant, per the no-hardcoded-rate ruling.
-constexpr double kEnvTimeMaxSeconds = 2.0;            // AHDSR A/H/D/R + pitch A/D throw ceiling (seconds)
-constexpr double kFadeMaxSeconds = 2.0;              // Trigger fade throw ceiling (wall-clock)
-constexpr double kPitchDepthMaxSemis = 24.0;          // AD pitch depth throw: +/-24 st, centered
 constexpr double kKeyTrackMax = 2.0;                 // key-track slider ceiling (0..200%)
 
+// A curve exponent's knob travel is LOGARITHMIC: 0.5 is the linear neutral, so the two halves
+// of the throw are the reciprocal shaping directions and the neutral sits at a centre detent.
+double curveFromNorm(double norm) {
+    const double t = clamp01(norm);
+    return std::exp(std::log(util::kCurveMin) +
+                    t * (std::log(util::kCurveMax) - std::log(util::kCurveMin)));
+}
+double normFromCurve(double curve) {
+    const double c = util::clampCurve(curve);
+    return clamp01((std::log(c) - std::log(util::kCurveMin)) /
+                   (std::log(util::kCurveMax) - std::log(util::kCurveMin)));
+}
+
 }  // namespace
 
 ReaSamplerEditor::FaceLayout ReaSamplerEditor::faceLayout(int w, int h) const {
@@ -69,16 +80,9 @@ ReaSamplerEditor::FaceLayout ReaSamplerEditor::faceLayout(int w, int h) const {
 }
 
 double ReaSamplerEditor::controlValue(int id, const PlaySeconds& play) const {
-    // Wall-clock seconds -> normalized over the seconds ceiling; source frames -> normalized over
+    // Wall-clock seconds -> normalized over the seconds ceiling; fractions and normalized
-    // the rate-resolved frames ceiling. Two domains, kept explicit so neither leaks a rate. A
+    // control positions pass through; curve exponents take the log travel.
-    // stored fade exceeding fadeMaxFrames() at the current host rate reads as norm 1.0 (clamp01
-    // pins it) and gets rewritten down on the next knob touch.
-    const double fadeMax = fadeMaxFrames();
     const auto secToNorm = [](double s) { return clamp01(s / kEnvTimeMaxSeconds); };
-    const auto framesToNorm = [fadeMax](std::int64_t f) {
-        // Ceiling unavailable (rate not yet known): inert until fadeMaxFrames() resolves.
-        return fadeMax > 0.0 ? clamp01(static_cast<double>(f) / fadeMax) : 0.0;
-    };
     switch (static_cast<ParamControl>(id)) {
         case ParamControl::kPlayMode:      return play.playMode == PlayMode::Trigger ? 1.0 : 0.0;
         case ParamControl::kPitchEngine:   return play.pitchEngine == PitchEngine::Preserve ? 1.0 : 0.0;
@@ -87,12 +91,23 @@ double ReaSamplerEditor::controlValue(int id, const PlaySeconds& play) const {
         case ParamControl::kDecay:         return secToNorm(play.adsr.decaySeconds);
         case ParamControl::kSustain:       return clamp01(play.adsr.sustainLevel);
         case ParamControl::kRelease:       return secToNorm(play.adsr.releaseSeconds);
+        case ParamControl::kAttackCurve:   return normFromCurve(play.adsr.attackCurve);
+        case ParamControl::kDecayCurve:    return normFromCurve(play.adsr.decayCurve);
+        case ParamControl::kReleaseCurve:  return normFromCurve(play.adsr.releaseCurve);
         case ParamControl::kTrigLength:    return clamp01(play.trigger.lengthFraction);
-        case ParamControl::kTrigFadeIn:    return framesToNorm(play.trigger.fadeInFrames);
+        case ParamControl::kTrigAttack:    return secToNorm(play.trigAhd.attackSeconds);
-        case ParamControl::kTrigFadeOut:   return framesToNorm(play.trigger.fadeOutFrames);
+        case ParamControl::kTrigHold:      return clamp01(play.trigAhd.holdFraction);
+        case ParamControl::kTrigDecay:     return secToNorm(play.trigAhd.decaySeconds);
+        case ParamControl::kTrigAttackCurve: return normFromCurve(play.trigAhd.attackCurve);
+        case ParamControl::kTrigDecayCurve:  return normFromCurve(play.trigAhd.decayCurve);
         case ParamControl::kPitchEnvEnable:return play.pitchEnv.enabled ? 1.0 : 0.0;
-        case ParamControl::kPitchEnvAttack:return secToNorm(play.pitchEnv.attackSeconds);
+        case ParamControl::kPitchEnvAttack:return secToNorm(play.pitchEnv.shape.attackSeconds);
-        case ParamControl::kPitchEnvDecay: return secToNorm(play.pitchEnv.decaySeconds);
+        case ParamControl::kPitchEnvHold:  return clamp01(play.pitchEnv.shape.holdFraction);
+        case ParamControl::kPitchEnvDecay: return secToNorm(play.pitchEnv.shape.decaySeconds);
+        case ParamControl::kPitchEnvAttackCurve:
+            return normFromCurve(play.pitchEnv.shape.attackCurve);
+        case ParamControl::kPitchEnvDecayCurve:
+            return normFromCurve(play.pitchEnv.shape.decayCurve);
         case ParamControl::kPitchEnvDepth:
             // Signed depth centered at 0.5 (0.5 == 0 semitones).
             return clamp01(0.5 + play.pitchEnv.peakSemitones / (2.0 * kPitchDepthMaxSemis));
@@ -113,19 +128,26 @@ double ReaSamplerEditor::controlValue(int id, const PlaySeconds& play) const {
         case ParamControl::kFilterEnvDecay:   return secToNorm(play.filter.env.decaySeconds);
         case ParamControl::kFilterEnvSustain: return clamp01(play.filter.env.sustainLevel);
         case ParamControl::kFilterEnvRelease: return secToNorm(play.filter.env.releaseSeconds);
+        case ParamControl::kFilterEnvAttackCurve:
+            return normFromCurve(play.filter.env.attackCurve);
+        case ParamControl::kFilterEnvDecayCurve:
+            return normFromCurve(play.filter.env.decayCurve);
+        case ParamControl::kFilterEnvReleaseCurve:
+            return normFromCurve(play.filter.env.releaseCurve);
+        case ParamControl::kFilterTrigAttack: return secToNorm(play.filter.trigEnv.attackSeconds);
+        case ParamControl::kFilterTrigHold:   return clamp01(play.filter.trigEnv.holdFraction);
+        case ParamControl::kFilterTrigDecay:  return secToNorm(play.filter.trigEnv.decaySeconds);
+        case ParamControl::kFilterTrigAttackCurve:
+            return normFromCurve(play.filter.trigEnv.attackCurve);
+        case ParamControl::kFilterTrigDecayCurve:
+            return normFromCurve(play.filter.trigEnv.decayCurve);
         default: return 0.0;
     }
 }
 
 void ReaSamplerEditor::applyControl(int id, PlaySeconds& play, double value,
                                     int segment) const {
-    const double fadeMax = fadeMaxFrames();  // rate-resolved knob full-scale
     const auto normToSec = [](double v) { return clamp01(v) * kEnvTimeMaxSeconds; };
-    const auto normToFrames = [fadeMax](double v) -> std::int64_t {
-        // Ceiling unavailable (rate not yet known): inert until fadeMaxFrames() resolves.
-        if (fadeMax <= 0.0) return 0;
-        return static_cast<std::int64_t>(clamp01(v) * fadeMax + 0.5);
-    };
     switch (static_cast<ParamControl>(id)) {
         case ParamControl::kPlayMode:
             play.playMode = (segment == 1) ? PlayMode::Trigger : PlayMode::Gate;
@@ -138,17 +160,33 @@ void ReaSamplerEditor::applyControl(int id, PlaySeconds& play, double value,
         case ParamControl::kDecay:    play.adsr.decaySeconds = normToSec(value); break;
         case ParamControl::kSustain:  play.adsr.sustainLevel = clamp01(value); break;
         case ParamControl::kRelease:  play.adsr.releaseSeconds = normToSec(value); break;
+        case ParamControl::kAttackCurve:  play.adsr.attackCurve = curveFromNorm(value); break;
+        case ParamControl::kDecayCurve:   play.adsr.decayCurve = curveFromNorm(value); break;
+        case ParamControl::kReleaseCurve: play.adsr.releaseCurve = curveFromNorm(value); break;
         case ParamControl::kTrigLength:
             // lengthFraction is (0,1]; keep a small floor so a zero-length trigger never plays nothing.
             play.trigger.lengthFraction = (std::max)(0.01, clamp01(value));
             break;
-        case ParamControl::kTrigFadeIn:  play.trigger.fadeInFrames = normToFrames(value); break;
+        case ParamControl::kTrigAttack: play.trigAhd.attackSeconds = normToSec(value); break;
-        case ParamControl::kTrigFadeOut: play.trigger.fadeOutFrames = normToFrames(value); break;
+        case ParamControl::kTrigHold:   play.trigAhd.holdFraction = clamp01(value); break;
+        case ParamControl::kTrigDecay:  play.trigAhd.decaySeconds = normToSec(value); break;
+        case ParamControl::kTrigAttackCurve:
+            play.trigAhd.attackCurve = curveFromNorm(value); break;
+        case ParamControl::kTrigDecayCurve:
+            play.trigAhd.decayCurve = curveFromNorm(value); break;
         case ParamControl::kPitchEnvEnable:
             play.pitchEnv.enabled = (segment == 1);
             break;
-        case ParamControl::kPitchEnvAttack: play.pitchEnv.attackSeconds = normToSec(value); break;
+        case ParamControl::kPitchEnvAttack:
-        case ParamControl::kPitchEnvDecay:  play.pitchEnv.decaySeconds = normToSec(value); break;
+            play.pitchEnv.shape.attackSeconds = normToSec(value); break;
+        case ParamControl::kPitchEnvHold:
+            play.pitchEnv.shape.holdFraction = clamp01(value); break;
+        case ParamControl::kPitchEnvDecay:
+            play.pitchEnv.shape.decaySeconds = normToSec(value); break;
+        case ParamControl::kPitchEnvAttackCurve:
+            play.pitchEnv.shape.attackCurve = curveFromNorm(value); break;
+        case ParamControl::kPitchEnvDecayCurve:
+            play.pitchEnv.shape.decayCurve = curveFromNorm(value); break;
         case ParamControl::kPitchEnvDepth:
             play.pitchEnv.peakSemitones = (clamp01(value) - 0.5) * 2.0 * kPitchDepthMaxSemis;
             break;
@@ -179,6 +217,22 @@ void ReaSamplerEditor::applyControl(int id, PlaySeconds& play, double value,
             play.filter.env.sustainLevel = clamp01(value); break;
         case ParamControl::kFilterEnvRelease:
             play.filter.env.releaseSeconds = normToSec(value); break;
+        case ParamControl::kFilterEnvAttackCurve:
+            play.filter.env.attackCurve = curveFromNorm(value); break;
+        case ParamControl::kFilterEnvDecayCurve:
+            play.filter.env.decayCurve = curveFromNorm(value); break;
+        case ParamControl::kFilterEnvReleaseCurve:
+            play.filter.env.releaseCurve = curveFromNorm(value); break;
+        case ParamControl::kFilterTrigAttack:
+            play.filter.trigEnv.attackSeconds = normToSec(value); break;
+        case ParamControl::kFilterTrigHold:
+            play.filter.trigEnv.holdFraction = clamp01(value); break;
+        case ParamControl::kFilterTrigDecay:
+            play.filter.trigEnv.decaySeconds = normToSec(value); break;
+        case ParamControl::kFilterTrigAttackCurve:
+            play.filter.trigEnv.attackCurve = curveFromNorm(value); break;
+        case ParamControl::kFilterTrigDecayCurve:
+            play.filter.trigEnv.decayCurve = curveFromNorm(value); break;
         default: break;
     }
 }
@@ -187,18 +241,6 @@ double ReaSamplerEditor::liveSampleRate() const {
     return processor_ ? processor_->sampleRate() : 0.0;
 }
 
-double ReaSamplerEditor::fadeMaxFrames() const {
-    // The Trigger-fade knob's full-scale throw is kFadeMaxSeconds (2 s wall-clock) resolved
-    // against the live rate — the same time base the envelope overlay already uses to place
-    // these source-frame fades on screen. Pre-setupProcessing the rate is still 0: rather than
-    // substitute a literal rate, callers treat a <= 0 return as "ceiling unavailable yet" and
-    // degrade the knob to inert rather than guess a rate. Storage stays source frames — this
-    // resolves the UI ceiling only.
-    const double rate = liveSampleRate();
-    if (rate <= 0.0) return 0.0;
-    return kFadeMaxSeconds * rate;
-}
-
 double ReaSamplerEditor::previewVelocity01() const {
     if (!processor_) return static_cast<double>(kPreviewVelocityDefault) / 127.0;
     return static_cast<double>(processor_->previewVelocity()) / 127.0;
@@ -267,16 +309,18 @@ std::string ReaSamplerEditor::deckValueLabel(int id) const {
             snprintf(buf, sizeof(buf), "%.3fs", play.adsr.releaseSeconds); break;
         case ParamControl::kTrigLength:
             snprintf(buf, sizeof(buf), "%.0f%%", play.trigger.lengthFraction * 100.0); break;
-        case ParamControl::kTrigFadeIn:
+        case ParamControl::kTrigAttack:
-            snprintf(buf, sizeof(buf), "%lldf",
+            snprintf(buf, sizeof(buf), "%.3fs", play.trigAhd.attackSeconds); break;
-                     static_cast<long long>(play.trigger.fadeInFrames)); break;
+        case ParamControl::kTrigHold:
-        case ParamControl::kTrigFadeOut:
+            snprintf(buf, sizeof(buf), "%.0f%%", play.trigAhd.holdFraction * 100.0); break;
-            snprintf(buf, sizeof(buf), "%lldf",
+        case ParamControl::kTrigDecay:
-                     static_cast<long long>(play.trigger.fadeOutFrames)); break;
+            snprintf(buf, sizeof(buf), "%.3fs", play.trigAhd.decaySeconds); break;
         case ParamControl::kPitchEnvAttack:
-            snprintf(buf, sizeof(buf), "%.3fs", play.pitchEnv.attackSeconds); break;
+            snprintf(buf, sizeof(buf), "%.3fs", play.pitchEnv.shape.attackSeconds); break;
+        case ParamControl::kPitchEnvHold:
+            snprintf(buf, sizeof(buf), "%.0f%%", play.pitchEnv.shape.holdFraction * 100.0); break;
         case ParamControl::kPitchEnvDecay:
-            snprintf(buf, sizeof(buf), "%.3fs", play.pitchEnv.decaySeconds); break;
+            snprintf(buf, sizeof(buf), "%.3fs", play.pitchEnv.shape.decaySeconds); break;
         case ParamControl::kPitchEnvDepth:
             snprintf(buf, sizeof(buf), "%+.1fst", play.pitchEnv.peakSemitones); break;
         case ParamControl::kKeyTrack:
@@ -322,6 +366,27 @@ std::string ReaSamplerEditor::deckValueLabel(int id) const {
             snprintf(buf, sizeof(buf), "%.0f%%", play.filter.env.sustainLevel * 100.0); break;
         case ParamControl::kFilterEnvRelease:
             snprintf(buf, sizeof(buf), "%.3fs", play.filter.env.releaseSeconds); break;
+        case ParamControl::kFilterTrigAttack:
+            snprintf(buf, sizeof(buf), "%.3fs", play.filter.trigEnv.attackSeconds); break;
+        case ParamControl::kFilterTrigHold:
+            snprintf(buf, sizeof(buf), "%.0f%%", play.filter.trigEnv.holdFraction * 100.0); break;
+        case ParamControl::kFilterTrigDecay:
+            snprintf(buf, sizeof(buf), "%.3fs", play.filter.trigEnv.decaySeconds); break;
+        // Every curve exponent reads the same way: the neutral shows as 1.00.
+        case ParamControl::kAttackCurve:
+        case ParamControl::kDecayCurve:
+        case ParamControl::kReleaseCurve:
+        case ParamControl::kTrigAttackCurve:
+        case ParamControl::kTrigDecayCurve:
+        case ParamControl::kPitchEnvAttackCurve:
+        case ParamControl::kPitchEnvDecayCurve:
+        case ParamControl::kFilterEnvAttackCurve:
+        case ParamControl::kFilterEnvDecayCurve:
+        case ParamControl::kFilterEnvReleaseCurve:
+        case ParamControl::kFilterTrigAttackCurve:
+        case ParamControl::kFilterTrigDecayCurve:
+            snprintf(buf, sizeof(buf), "^%.2f", curveFromNorm(controlValue(id, play)));
+            break;
         default:
             // -2 (preview velocity) is labeled at its chrome call site; nothing else here.
             break;
@@ -330,61 +395,118 @@ std::string ReaSamplerEditor::deckValueLabel(int id) const {
 }
 
 EnvClampBounds ReaSamplerEditor::envClampBounds() const {
-    // Match the control-panel sliders' own domains so a node drag can never produce a param a
+    // Match the deck knobs' own domains so a node drag can never produce a param a knob
-    // slider couldn't. AHDSR seconds cap at kEnvTimeMaxSeconds; the Trigger fade/length
+    // couldn't. Every stage time caps at kEnvTimeMaxSeconds; the Hold fractions and the sustain
-    // fractions cap at 1.0 (the natural full-span bound the sliders use).
+    // level are [0,1] by definition and need no bound here.
     EnvClampBounds b;
     b.maxAttackSeconds  = kEnvTimeMaxSeconds;
     b.maxHoldSeconds    = kEnvTimeMaxSeconds;
     b.maxDecaySeconds   = kEnvTimeMaxSeconds;
     b.maxReleaseSeconds = kEnvTimeMaxSeconds;
-    b.maxFadeInFraction  = 1.0;
-    b.maxFadeOutFraction = 1.0;
-    b.maxLengthFraction  = 1.0;
     return b;
 }
 
-AmpEnvelope ReaSamplerEditor::packEnvelope(const PlaySeconds& play, std::int64_t frames,
+ReaSamplerEditor::OverlayEnv ReaSamplerEditor::overlayEnvForRadio(int radioId) {
+    switch (static_cast<ParamControl>(radioId)) {
+        case ParamControl::kAmpEnvSelect:    return OverlayEnv::kAmp;
+        case ParamControl::kPitchEnvSelect:  return OverlayEnv::kPitch;
+        case ParamControl::kFilterEnvSelect: return OverlayEnv::kFilter;
+        default:                             return OverlayEnv::kNone;
+    }
+}
+
+namespace {
+// The two directions of the AHDSR <-> StageEnvelope copy, so a field can only be forgotten in
+// one place rather than two.
+void packAhdsr(const AdsrSeconds& a, StageEnvelope& env) {
+    env.kind = instrument::ui::EnvKind::Ahdsr;
+    env.attackSeconds  = a.attackSeconds;
+    env.holdSeconds    = a.holdSeconds;
+    env.decaySeconds   = a.decaySeconds;
+    env.sustainLevel   = a.sustainLevel;
+    env.releaseSeconds = a.releaseSeconds;
+    env.attackCurve    = a.attackCurve;
+    env.decayCurve     = a.decayCurve;
+    env.releaseCurve   = a.releaseCurve;
+}
+void unpackAhdsr(const StageEnvelope& env, AdsrSeconds& a) {
+    a.attackSeconds  = env.attackSeconds;
+    a.holdSeconds    = env.holdSeconds;
+    a.decaySeconds   = env.decaySeconds;
+    a.sustainLevel   = env.sustainLevel;
+    a.releaseSeconds = env.releaseSeconds;
+    a.attackCurve    = env.attackCurve;
+    a.decayCurve     = env.decayCurve;
+    a.releaseCurve   = env.releaseCurve;
+}
+void packAhd(const AhdSeconds& a, double originSeconds, double spanSeconds, StageEnvelope& env) {
+    env.kind = instrument::ui::EnvKind::Ahd;
+    env.attackSeconds = a.attackSeconds;
+    env.decaySeconds  = a.decaySeconds;
+    env.holdFraction  = a.holdFraction;
+    env.attackCurve   = a.attackCurve;
+    env.decayCurve    = a.decayCurve;
+    env.originSeconds = originSeconds;
+    env.spanSeconds   = spanSeconds;
+}
+void unpackAhd(const StageEnvelope& env, AhdSeconds& a) {
+    a.attackSeconds = env.attackSeconds;
+    a.decaySeconds  = env.decaySeconds;
+    a.holdFraction  = env.holdFraction;
+    a.attackCurve   = env.attackCurve;
+    a.decayCurve    = env.decayCurve;
+}
+}  // namespace
+
+StageEnvelope ReaSamplerEditor::packEnvelope(OverlayEnv which, const PlaySeconds& play,
+                                             std::int64_t frames,
                                              std::int64_t startFrame) const {
-    AmpEnvelope env;
+    StageEnvelope env;
-    env.mode = (play.playMode == PlayMode::Trigger) ? EnvMode::Trigger : EnvMode::Gate;
+    const double rate = liveSampleRate();
-    // AHDSR seconds copy 1-to-1 (rate-free, the same domain the overlay draws).
+    const double t0 = rate > 0.0 ? static_cast<double>(startFrame) / rate : 0.0;
-    env.attackSeconds  = play.adsr.attackSeconds;
+    // The Trigger amp and filter AHDs live over the PLAY span; the pitch AHD over the whole
-    env.holdSeconds    = play.adsr.holdSeconds;
+    // post-start span, since it keeps running after a Trigger one-shot's amplitude has ended.
-    env.decaySeconds   = play.adsr.decaySeconds;
-    env.sustainLevel   = play.adsr.sustainLevel;
-    env.releaseSeconds = play.adsr.releaseSeconds;
-    // Trigger: lengthFraction copies 1-to-1; the fades are derived — source frames over the played
-    // span (the trigger-seam converter, pack direction). startFrame is the effective start
-    // point so the fraction denominator matches the voice's actual post-start span. A zero play
-    // length yields 0 fractions.
-    env.lengthFraction = play.trigger.lengthFraction;
     const std::int64_t playLen =
         triggerPlayLength(play.trigger.lengthFraction, frames, startFrame);
-    env.fadeInFraction  = framesToFadeFraction(play.trigger.fadeInFrames,  playLen);
+    const double playSpan = rate > 0.0 ? static_cast<double>(playLen) / rate : 0.0;
-    env.fadeOutFraction = framesToFadeFraction(play.trigger.fadeOutFrames, playLen);
+    const double fullSpan =
+        rate > 0.0 ? static_cast<double>((std::max)(std::int64_t{0}, frames - startFrame)) / rate
+                   : 0.0;
+    const bool trigger = (play.playMode == PlayMode::Trigger);
+    switch (which) {
+        case OverlayEnv::kPitch:
+            packAhd(play.pitchEnv.shape, t0, fullSpan, env);
+            break;
+        case OverlayEnv::kFilter:
+            if (trigger) packAhd(play.filter.trigEnv, t0, playSpan, env);
+            else packAhdsr(play.filter.env, env);
+            break;
+        case OverlayEnv::kAmp:
+        case OverlayEnv::kNone:
+            if (trigger) packAhd(play.trigAhd, t0, playSpan, env);
+            else packAhdsr(play.adsr, env);
+            break;
+    }
     return env;
 }
 
-void ReaSamplerEditor::unpackEnvelope(const AmpEnvelope& env, std::int64_t frames,
+void ReaSamplerEditor::unpackEnvelope(OverlayEnv which, const StageEnvelope& env,
-                                      std::int64_t startFrame, PlaySeconds& play) const {
+                                      PlaySeconds& play) const {
-    if (env.mode == EnvMode::Gate) {
+    const bool trigger = (play.playMode == PlayMode::Trigger);
-        play.adsr.attackSeconds  = env.attackSeconds;
+    switch (which) {
-        play.adsr.holdSeconds    = env.holdSeconds;
+        case OverlayEnv::kPitch:
-        play.adsr.decaySeconds   = env.decaySeconds;
+            unpackAhd(env, play.pitchEnv.shape);
-        play.adsr.sustainLevel   = env.sustainLevel;
+            break;
-        play.adsr.releaseSeconds = env.releaseSeconds;
+        case OverlayEnv::kFilter:
-    } else {
+            if (trigger) unpackAhd(env, play.filter.trigEnv);
-        // Trigger: lengthFraction copies back; the fades convert fractions -> source frames over
+            else unpackAhdsr(env, play.filter.env);
-        // the played span (the trigger-seam converter, unpack direction). startFrame is the
+            break;
-        // effective start point so the frame denominator matches the voice's actual
+        case OverlayEnv::kAmp:
-        // post-start span. Keep the same (0,1] floor on lengthFraction the slider path enforces
+            if (trigger) unpackAhd(env, play.trigAhd);
-        // so a zero-length trigger never plays nothing.
+            else unpackAhdsr(env, play.adsr);
-        play.trigger.lengthFraction = (std::max)(0.01, env.lengthFraction);
+            break;
-        const std::int64_t playLen =
+        case OverlayEnv::kNone:
-            triggerPlayLength(play.trigger.lengthFraction, frames, startFrame);
+            break;  // nothing is overlay-active, so there is nothing a drag could have edited
-        play.trigger.fadeInFrames  = fadeFractionToFrames(env.fadeInFraction,  playLen);
-        play.trigger.fadeOutFrames = fadeFractionToFrames(env.fadeOutFraction, playLen);
     }
 }
 

src/shell/instrument/editor_input.cpp

@@ -78,6 +78,7 @@ void ReaSamplerEditor::onMouseUp(int x, int y) {
     const Rect curveRect = dragCurveRect_;
     drag_ = DragKind::kNone;
     dragParamId_ = -1;
+    dragInnerCellId_ = -1;
     curvePointIndex_ = -1;
     // hover_ is deliberately not re-resolved during a drag (see resolveHover's caller), so it
     // still names wherever the drag started. Re-resolve now against the release position, for

src/shell/instrument/editor_input_deck.cpp

@@ -19,6 +19,7 @@ using namespace reasampler::instrument::ui;
 bool ReaSamplerEditor::deckKnobDisabled(int id) const {
     switch (static_cast<ParamControl>(id)) {
         case ParamControl::kPitchEnvAttack:
+        case ParamControl::kPitchEnvHold:
         case ParamControl::kPitchEnvDecay:
         case ParamControl::kPitchEnvDepth:
             return !params_.play.pitchEnv.enabled;
@@ -34,6 +35,9 @@ bool ReaSamplerEditor::deckKnobDisabled(int id) const {
         case ParamControl::kFilterEnvDecay:
         case ParamControl::kFilterEnvSustain:
         case ParamControl::kFilterEnvRelease:
+        case ParamControl::kFilterTrigAttack:
+        case ParamControl::kFilterTrigHold:
+        case ParamControl::kFilterTrigDecay:
             return !params_.play.filter.enabled;
         default:
             return false;
@@ -46,6 +50,14 @@ bool ReaSamplerEditor::mouseDownDeck(const FaceLayout& fl, int x, int y) {
 
     const DeckLayout dl = layoutDeck(fl.deckDescs, band.x, band.y, band.width);
     const DeckHit hit = hitTestDeck(dl, x, y);
+    if (hit.kind == DeckHitKind::CaptionRadio) {
+        // Exclusive across the three envelope decks, and clicking the active one clears it —
+        // "no envelope shown" is a state the user can get back to, not an error.
+        const OverlayEnv picked = overlayEnvForRadio(hit.id);
+        overlayEnv_ = (overlayEnv_ == picked) ? OverlayEnv::kNone : picked;
+        invalidate();  // view state only: no parameter write, no reload
+        return true;
+    }
     if (hit.kind == DeckHitKind::CaptionToggle || hit.kind == DeckHitKind::RowToggle) {
         switch (static_cast<ParamControl>(hit.id)) {
             case ParamControl::kVoiceMode: {
@@ -87,9 +99,14 @@ bool ReaSamplerEditor::mouseDownDeck(const FaceLayout& fl, int x, int y) {
     if (hit.kind == DeckHitKind::Knob) {
         // Knobs of a disabled group are drawn but inert.
         if (deckKnobDisabled(hit.id)) return true;
+        // A grab on the inner disc drags the CURVE control instead, but only where the stage
+        // is sloped; on a Hold or Sustain cell the inner region is just more of the knob.
+        const ParamControl curve = curveParamFor(static_cast<ParamControl>(hit.id));
+        const bool inner = hit.inner && curve != ParamControl::kCount;
         drag_ = DragKind::kDeckKnob;
-        dragParamId_ = hit.id;
+        dragParamId_ = inner ? static_cast<int>(curve) : hit.id;
-        dragKnobStartValue_ = deckControlNorm(hit.id);
+        dragInnerCellId_ = inner ? hit.id : -1;
+        dragKnobStartValue_ = deckControlNorm(dragParamId_);
         // Processor-side knobs (voice count / master gain) are transient live writes with no
         // parameter-set mutation, so they need no rollback snapshot.
         dragStartParams_ = params_;
@@ -120,6 +137,12 @@ ReaSamplerEditor::HoverTarget ReaSamplerEditor::hoverDeck(const FaceLayout& fl,
     const DeckLayout dl = layoutDeck(fl.deckDescs, band.x, band.y, band.width);
     const DeckHit dh = hitTestDeck(dl, x, y);
     if (dh.kind == DeckHitKind::None) return {};
+    if (dh.kind == DeckHitKind::CaptionRadio) return {HoverKind::kEnvRadio, dh.id};
+    if (dh.kind == DeckHitKind::Knob && dh.inner &&
+        curveParamFor(static_cast<ParamControl>(dh.id)) != ParamControl::kCount) {
+        // Indexed by the OUTER cell id so the paint side can find the cell it belongs to.
+        return {HoverKind::kInnerDial, dh.id};
+    }
     return {HoverKind::kControl, dh.id};
 }
 

src/shell/instrument/editor_input_waveform.cpp

@@ -28,11 +28,12 @@ bool ReaSamplerEditor::mouseDownWaveform(const FaceLayout& fl, int x, int y) {
     if (frames <= 0) return false;
     const OverlayArea overlay = waveformOverlayArea(fl.bands.waveform);
 
-    // Envelope nodes first (they sit on top of the markers), then the wave markers.
+    // Envelope nodes first (they sit on top of the markers), then the wave markers. With no
+    // envelope overlay-active there are no nodes at all and the markers take every grab.
     const double rate = liveSampleRate();
-    if (rate > 0.0) {
+    if (rate > 0.0 && overlayEnv_ != OverlayEnv::kNone) {
         const std::int64_t startFrame = params_.startPoint.value_or(0);
-        const AmpEnvelope env = packEnvelope(params_.play, frames, startFrame);
+        const StageEnvelope env = packEnvelope(overlayEnv_, params_.play, frames, startFrame);
         const double totalSeconds = static_cast<double>(frames) / rate;
         const NodeHit nh = nodeAtPoint(env, overlay, totalSeconds, x, y);
         if (nh.hit) {
@@ -42,7 +43,6 @@ bool ReaSamplerEditor::mouseDownWaveform(const FaceLayout& fl, int x, int y) {
             dragStartY_ = y;
             dragStartEnv_ = env;
             dragSampleFrames_ = frames;
-            dragStartFrame_ = startFrame;
             dragStartParams_ = params_;
             return true;  // node moves once the cursor drags
         }
@@ -68,18 +68,17 @@ void ReaSamplerEditor::dragWaveform(const FaceLayout& fl, int x, int y) {
 
     if (drag_ == DragKind::kEnvNode) {
         // Resolve the grabbed envelope node's new params from the pixel delta (through the
-        // pure envelope_edit inverse map, clamped + monotonic), then unpack them back onto
+        // pure envelope_edit inverse map, clamped), then unpack them back onto the parameter
-        // the parameter set. The AmpEnvelope was snapshotted at grab (dragStartEnv_) so the
+        // set. The StageEnvelope was snapshotted at grab (dragStartEnv_) so the delta is
-        // delta is absolute.
+        // absolute.
         const std::int64_t frames = dragSampleFrames_;
         const double rate = liveSampleRate();
         if (frames <= 0 || rate <= 0.0) return;
         const double totalSeconds = static_cast<double>(frames) / rate;
-        const AmpEnvelope edited = resolveNodeDrag(dragStartEnv_, envNode_, overlay, totalSeconds,
+        const StageEnvelope edited = resolveNodeDrag(dragStartEnv_, envNode_, overlay,
-                                                   envClampBounds(), dx, y - dragStartY_);
+                                                     totalSeconds, envClampBounds(), dx,
-        unpackEnvelope(edited, frames, dragStartFrame_, params_.play);
+                                                     y - dragStartY_);
-        // In Gate the node IS a live AHDSR control, so the sounding note follows the drag;
+        unpackEnvelope(overlayEnv_, edited, params_.play);
-        // Trigger's nodes rewrite the play span and still commit on release.
         if (dragCommitsLive(DragKind::kEnvNode)) commitLive();
         invalidate();  // live feedback; commit on WM_LBUTTONUP
         return;

src/shell/instrument/editor_internal.h

@@ -156,6 +156,42 @@ inline void drawKnobFace(LICE_IBitmap* bmp, const instrument::ui::Rect& knobRect
               toLice(ui::roleColor(needleRole)), 1.0f, 0, true);
 }
 
+// The concentric INNER dial: a second value on the same cell, drawn in the categorical
+// tertiary accent so it reads as a different KIND of control rather than a louder one — the
+// same purple the overlay traces the envelope in, which is what ties a segment's knot to its
+// dial by eye. Shares the outer knob's value<->angle map (param_slider's), so both needles
+// point the same way for the same normalized value.
+inline void drawInnerDial(LICE_IBitmap* bmp, const instrument::ui::Rect& innerRect,
+                          double value01, ui::InteractionState st) {
+    using instrument::ui::KnobArc;
+    using instrument::ui::KnobGeometry;
+    using instrument::ui::KnobPoint;
+    const KnobGeometry kg = instrument::ui::computeKnob(innerRect);
+    if (kg.radius <= 1.0) return;
+    constexpr double kDegToRad = 3.14159265358979323846 / 180.0;
+    const KnobArc arc{};
+    const float cx = static_cast<float>(kg.centerX);
+    const float cy = static_cast<float>(kg.centerY);
+    const float r = static_cast<float>(kg.radius) - 0.5f;
+    const bool disabled = (st == ui::InteractionState::Disabled);
+    const bool hot = (st == ui::InteractionState::Dragging || st == ui::InteractionState::Hover);
+
+    LICE_FillCircle(bmp, cx, cy, r - 1.f, toLice(ui::roleColorState(ui::Role::BgPanel, st)), 1.0f,
+                    0, true);
+    const double v = value01 < 0.0 ? 0.0 : (value01 > 1.0 ? 1.0 : value01);
+    const float a0 = static_cast<float>((arc.startDeg - 360.0) * kDegToRad);
+    const float av = static_cast<float>(
+        (arc.startDeg + v * instrument::ui::knobSweepDeg(arc) - 360.0) * kDegToRad);
+    const ui::Role arcRole = disabled ? ui::Role::TextDim
+                                      : (hot ? ui::Role::AccentHot : ui::Role::AccentTertiary);
+    LICE_Arc(bmp, cx, cy, r, a0, av, toLice(ui::roleColor(arcRole)), 1.0f, 0, true);
+    const KnobPoint tip = instrument::ui::knobNeedlePoint(kg, arc, v);
+    LICE_Line(bmp, static_cast<int>(cx + 0.5f), static_cast<int>(cy + 0.5f),
+              static_cast<int>(tip.x + 0.5f), static_cast<int>(tip.y + 0.5f),
+              toLice(ui::roleColor(disabled ? ui::Role::TextDim : ui::Role::AccentTertiary)),
+              1.0f, 0, true);
+}
+
 #endif  // _WIN32
 
 }  // namespace reasampler::vst

src/shell/instrument/editor_paint_deck.cpp

@@ -60,11 +60,13 @@ void ReaSamplerEditor::paintDeck(LICE_IBitmap* bmp, const FaceLayout& fl) {
             case ParamControl::kDecay:          return "Decay";
             case ParamControl::kSustain:        return "Sustain";
             case ParamControl::kRelease:        return "Release";
-            case ParamControl::kTrigFadeIn:     return "Fade In";
             case ParamControl::kTrigLength:     return "Len %";
-            case ParamControl::kTrigFadeOut:    return "Fade Out";
+            case ParamControl::kTrigAttack:     return "Attack";
+            case ParamControl::kTrigHold:       return "Hold";
+            case ParamControl::kTrigDecay:      return "Decay";
             case ParamControl::kKeyTrack:       return "Key Trk";
             case ParamControl::kPitchEnvAttack: return "P.Att";
+            case ParamControl::kPitchEnvHold:   return "P.Hold";
             case ParamControl::kPitchEnvDecay:  return "P.Dec";
             case ParamControl::kPitchEnvDepth:  return "P.Depth";
             case ParamControl::kVoiceCount:     return "Voices";
@@ -81,6 +83,9 @@ void ReaSamplerEditor::paintDeck(LICE_IBitmap* bmp, const FaceLayout& fl) {
             case ParamControl::kFilterEnvDecay:   return "F.Dec";
             case ParamControl::kFilterEnvSustain: return "F.Sus";
             case ParamControl::kFilterEnvRelease: return "F.Rel";
+            case ParamControl::kFilterTrigAttack: return "F.Att";
+            case ParamControl::kFilterTrigHold:   return "F.Hold";
+            case ParamControl::kFilterTrigDecay:  return "F.Dec";
             default:                            return "";
         }
     };
@@ -103,6 +108,22 @@ void ReaSamplerEditor::paintDeck(LICE_IBitmap* bmp, const FaceLayout& fl) {
         }
         kitText(bmp, g.caption, caption, Font::Micro, Role::TextDim);
 
+        // The overlay-select radio: filled in the tertiary accent (the colour the overlay
+        // traces in) when this group's envelope is the one on the waveform, hollow otherwise.
+        if (g.captionRadio.id >= 0) {
+            const bool on = (overlayEnv_ == overlayEnvForRadio(g.captionRadio.id));
+            const bool hov = isHovered(HoverKind::kEnvRadio, g.captionRadio.id);
+            const Rect& rb = g.captionRadio.box;
+            LICE_DrawRect(bmp, rb.x, rb.y, rb.width - 1, rb.height - 1,
+                          toLice(roleColor(on || hov ? Role::AccentTertiary
+                                                     : Role::LineHairline)),
+                          1.0f, 0);
+            if (on) {
+                LICE_FillRect(bmp, rb.x + 3, rb.y + 3, rb.width - 6, rb.height - 6,
+                              toLice(roleColor(Role::AccentTertiary)), 1.0f, 0);
+            }
+        }
+
         // The compact caption toggle (right-anchored in the caption row, never full-width).
         if (g.captionToggle.id >= 0) {
             switch (static_cast<ParamControl>(g.captionToggle.id)) {
@@ -142,7 +163,7 @@ void ReaSamplerEditor::paintDeck(LICE_IBitmap* bmp, const FaceLayout& fl) {
         // The knobs. A dependent group's knobs draw Disabled (not hidden) — stable geometry.
         // The predicate is the input side's, so the drawn state and the inert grab agree.
         for (const DeckCellLayout& c : g.cells) {
-            if (c.id < 0) continue;  // reserved blank cell (the Trigger face's two spares)
+            if (c.id < 0) continue;  // reserved blank cell (the Trigger face's spare)
             const bool disabled = deckKnobDisabled(c.id);
             const bool dragging = (drag_ == DragKind::kDeckKnob && dragParamId_ == c.id);
             const bool hov = !disabled && isHovered(HoverKind::kControl, c.id);
@@ -151,9 +172,28 @@ void ReaSamplerEditor::paintDeck(LICE_IBitmap* bmp, const FaceLayout& fl) {
                          : (dragging ? InteractionState::Dragging
                                      : (hov ? InteractionState::Hover : InteractionState::Rest));
             drawKnobFace(bmp, c.knob, deckControlNorm(c.id), st);
-            const std::string label = (dragging || hov)
+
-                ? deckValueLabel(c.id)
+            // The inner dial rides only the knobs whose stage is sloped — deck_groups owns
-                : std::string(knobName(static_cast<ParamControl>(c.id)));
+            // that rule, so a Hold or Sustain cell simply has no curve id and draws none.
+            const ParamControl curve = curveParamFor(static_cast<ParamControl>(c.id));
+            const bool innerDragging =
+                (drag_ == DragKind::kDeckKnob && dragInnerCellId_ == c.id);
+            const bool innerHov = !disabled && isHovered(HoverKind::kInnerDial, c.id);
+            if (curve != ParamControl::kCount) {
+                const InteractionState ist =
+                    disabled ? InteractionState::Disabled
+                             : (innerDragging ? InteractionState::Dragging
+                                              : (innerHov ? InteractionState::Hover
+                                                          : InteractionState::Rest));
+                drawInnerDial(bmp, c.inner, deckControlNorm(static_cast<int>(curve)), ist);
+            }
+
+            // One label band, so the inner dial's readout takes it while the inner dial is the
+            // one being touched.
+            std::string label;
+            if (innerDragging || innerHov) label = deckValueLabel(static_cast<int>(curve));
+            else if (dragging || hov) label = deckValueLabel(c.id);
+            else label = std::string(knobName(static_cast<ParamControl>(c.id)));
             kitTextCentered(bmp, c.label, label.c_str(), Font::Micro, Role::TextDim);
         }
     }

src/shell/instrument/editor_paint_waveform.cpp

@@ -100,37 +100,49 @@ void ReaSamplerEditor::paintWaveform(LICE_IBitmap* bmp, const Rect& band) {
 
 void ReaSamplerEditor::paintEnvelopeOverlay(LICE_IBitmap* bmp, const OverlayArea& waveArea,
                                             std::int64_t frames) {
+    if (overlayEnv_ == OverlayEnv::kNone) return;  // no envelope selected is a resting state
     const Rect& area = waveArea.rect;
     if (frames <= 0 || area.width <= 0 || area.height <= 0) return;
     const double rate = liveSampleRate();
     if (rate <= 0.0) return;
     const double totalSeconds = static_cast<double>(frames) / rate;
     const std::int64_t startFrame = params_.startPoint.value_or(0);
-    const AmpEnvelope env = packEnvelope(params_.play, frames, startFrame);
+    const StageEnvelope env = packEnvelope(overlayEnv_, params_.play, frames, startFrame);
     const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, waveArea, totalSeconds);
 
-    // Trace the polyline in the categorical secondary accent (teal) so it reads as a distinct
+    // Trace the polyline in the categorical TERTIARY accent (purple): the waveform behind it is
-    // curve over the waveform. Clip x to the wave rect (a Gate release tail maps past the right).
+    // drawn in the primary lime, and the secondary teal this used to use sits too close to that
-    const LICE_pixel line = toLice(roleColor(Role::AccentSecondary));
+    // hue to separate from it. Clip x to the wave rect. Knots are handles, not line vertices.
-    for (std::size_t i = 1; i < poly.size(); ++i) {
+    const LICE_pixel line = toLice(roleColor(Role::AccentTertiary));
-        const int x0 = (std::max)(area.x, (std::min)(area.right() - 1, poly[i - 1].x));
+    const EnvVertex* prev = nullptr;
-        const int x1 = (std::max)(area.x, (std::min)(area.right() - 1, poly[i].x));
+    for (const EnvVertex& v : poly) {
-        LICE_Line(bmp, x0, poly[i - 1].y, x1, poly[i].y, line, 1.0f, 0, true);
+        if (v.knot) continue;
+        if (prev != nullptr) {
+            const int x0 = (std::max)(area.x, (std::min)(area.right() - 1, prev->x));
+            const int x1 = (std::max)(area.x, (std::min)(area.right() - 1, v.x));
+            LICE_Line(bmp, x0, prev->y, x1, v.y, line, 1.0f, 0, true);
         }
-    // Draggable node handles: a small square per draggable node (Origin + ReleaseStart are
+        prev = &v;
-    // draw-only). Lit accent-hot when this node is the grabbed one. Every vertex is
+    }
-    // guaranteed in-bounds (edge nodes like ReleaseEnd at area.right()-1 must get handles);
+    // Handles: a square per draggable stage node, a ROUND knot per curvable segment. Lit
-    // the handle square is additionally clamped inside the band so a 6px box on an edge
+    // accent-hot when this node is the grabbed one. Every vertex is guaranteed in-bounds; the
-    // node never overhangs into the neighbouring bands.
+    // handle is additionally clamped inside the band so one on an edge node never overhangs
-    const LICE_pixel handle = toLice(roleColor(Role::AccentPrimary));
+    // into the neighbouring bands.
+    const LICE_pixel handle = toLice(roleColor(Role::AccentTertiary));
     const LICE_pixel handleHot = toLice(roleColor(Role::AccentHot));
     for (const EnvVertex& v : poly) {
-        if (v.node == EnvNode::Origin || v.node == EnvNode::ReleaseStart) continue;
+        if (v.node == EnvNode::Origin || v.node == EnvNode::ReleaseEnd) continue;
         const bool grabbed = (drag_ == DragKind::kEnvNode && envNode_ == v.node);
         const int r = 3;
         const int hx = (std::max)(area.x + r, (std::min)(area.right() - 1 - r, v.x));
         const int hy = (std::max)(area.y + r, (std::min)(area.bottom() - 1 - r, v.y));
-        LICE_FillRect(bmp, hx - r, hy - r, 2 * r, 2 * r, grabbed ? handleHot : handle, 1.0f, 0);
+        if (v.knot) {
+            LICE_FillCircle(bmp, static_cast<float>(hx), static_cast<float>(hy),
+                            static_cast<float>(r), grabbed ? handleHot : handle, 1.0f, 0, true);
+        } else {
+            LICE_FillRect(bmp, hx - r, hy - r, 2 * r, 2 * r, grabbed ? handleHot : handle, 1.0f,
+                          0);
+        }
     }
 }
 

src/shell/instrument/editor_platform.cpp

@@ -244,6 +244,7 @@ LRESULT CALLBACK ReaSamplerEditor::wndProc(HWND hwnd, UINT msg, WPARAM wParam,
                     }
                     self->drag_ = DragKind::kNone;
                     self->dragParamId_ = -1;
+                    self->dragInnerCellId_ = -1;  // inner-dial drag state (peer reset)
                     self->curvePointIndex_ = -1;  // curve-node drag state (peer reset)
                     // No cursor position is available here to re-resolve hover (unlike
                     // onMouseUp's release coordinates), so clear rather than leave it naming

src/shell/instrument/editor_session.cpp

@@ -151,7 +151,7 @@ bool ReaSamplerEditor::dragCommitsLive(DragKind kind, int paramId) const {
     const LiveDragKind k = kind == DragKind::kDeckKnob ? LiveDragKind::kDeckKnob
                          : kind == DragKind::kEnvNode  ? LiveDragKind::kEnvNode
                                                        : LiveDragKind::kOther;
-    return instrument::ui::liveCommitFor(k, paramId, params_.play.playMode);
+    return instrument::ui::liveCommitFor(k, paramId);
 }
 
 void ReaSamplerEditor::loadSelection(const std::string& id) {

src/shell/instrument/reasampler_editor.h

@@ -17,7 +17,7 @@
 #include "core/instrument/ui/deck_groups.h"      // DeckParam / DeckGroupId / sampleDeckGroups
 #include "core/instrument/ui/editor_geometry.h"  // Rect (shared sub-rect type)
 #include "core/instrument/ui/envelope_edit.h"    // EnvClampBounds / NodeHit (envelope node hit-test/edit)
-#include "core/instrument/ui/envelope_overlay.h" // AmpEnvelope / EnvNode (envelope overlay draw seam)
+#include "core/instrument/ui/envelope_overlay.h" // StageEnvelope / EnvNode (envelope overlay draw seam)
 #include "core/instrument/ui/knob_deck.h"        // DeckGroupDesc / DeckLayout (the deck band)
 #include "core/instrument/ui/sample_bands.h"     // SampleBands (the band-stack allocator)
 #include "core/instrument/ui/sample_chrome.h"    // ChromeRects (chrome-band interior)
@@ -41,7 +41,6 @@ using instrument::map::PlaySeconds;
 using instrument::map::SampleChoice;
 using instrument::map::SampleRefEntry;
 using instrument::map::SampleRefs;
-using instrument::ui::AmpEnvelope;
 using instrument::ui::ChromeRects;
 using instrument::ui::DeckGroupDesc;
 using instrument::ui::EnvClampBounds;
@@ -49,6 +48,7 @@ using instrument::ui::EnvNode;
 using instrument::ui::OverlayArea;
 using instrument::ui::Rect;
 using instrument::ui::SampleBands;
+using instrument::ui::StageEnvelope;
 
 class ReaSamplerProcessor;
 
@@ -81,6 +81,11 @@ private:
     enum class DragKind { kNone, kRootMarker, kWaveMarker, kScrollThumb, kEnvNode,
                           kCurveNode, kDeckKnob };
 
+    // Which envelope the waveform overlay is drawing and editing. Exclusive, and kNone is a
+    // valid resting state — the editor opens there. Transient view state: never persisted,
+    // never a parameter.
+    enum class OverlayEnv { kNone, kAmp, kPitch, kFilter };
+
     // Controls on the setup surface. The int value is the opaque control id the pure
     // knob_deck hit-test returns; the shell maps it to the one parameter set or a
     // processor-side per-instance setter. The id space and the deck's group composition are
@@ -107,6 +112,8 @@ private:
         kChanStereo,      // the stereo channel-mode segment
         kPreview,         // the preview-trigger button
         kControl,         // a knob-deck element (index = control id)
+        kInnerDial,       // a knob cell's inner curve dial (index = the OUTER control id)
+        kEnvRadio,        // an envelope deck's overlay-select radio (index = radio control id)
         kCurveNode,       // a velocity-curve control point (index = point index)
         kVelKnob,         // the chrome preview-velocity radial knob
         kStripKey,        // a piano-strip key (index = MIDI note); carries the name tooltip
@@ -302,8 +309,8 @@ private:
     // pitch envelope) — wall-clock seconds, rate-free; the build resolves to frames.
 
     // The normalized [0,1] display value for control `id` given `play` (seconds -> 0..1 over
-    // a fixed ceiling, sustain 0..1 as-is, %-length/fade frames -> 0..1, semitone depth
+    // a fixed ceiling, levels and fractions as-is, semitone depth centered at 0.5, curve
-    // centered at 0.5).
+    // exponents over their logarithmic travel).
     double controlValue(int id, const PlaySeconds& play) const;
 
     // Applies a committed control interaction to `play`: a knob's normalized `value` or a
@@ -315,22 +322,22 @@ private:
     // over the knob's 0..1).
     void applyParamControl(int id, double value, int segment);
 
-    // The Trigger fade-in/out knob full-scale, in source frames: kFadeMaxSeconds resolved
+    // The overlay speaks one StageEnvelope whichever envelope is active; pack/unpack are the
-    // against the live rate — never a baked-in rate. Returns 0 when the rate is unknown.
+    // only place that knows which stored struct each `which` maps onto, so the drawn shape and
-    double fadeMaxFrames() const;
+    // a committed node drag can never disagree about it. AHDSR seconds are rate-free and copy
+    // 1-to-1; an AHD additionally needs the wall-clock span its Hold fraction is taken against,
+    // which is where `frames`/`startFrame` and the live rate come in.
 
-    // envelope_overlay's AmpEnvelope stores Trigger fades as fractions of the played span,
+    // PACK (draw): play params -> StageEnvelope. `startFrame` is the effective start point.
-    // while the parameter set stores source frames — pack/unpack own that conversion (see
+    StageEnvelope packEnvelope(OverlayEnv which, const PlaySeconds& play, std::int64_t frames,
-    // envelope_overlay.h's trigger-seam note). `frames` is total source frames; AHDSR
-    // seconds are rate-free and copy 1-to-1.
-
-    // PACK (draw): play params -> AmpEnvelope. `startFrame` is the effective start point.
-    AmpEnvelope packEnvelope(const PlaySeconds& play, std::int64_t frames,
                                std::int64_t startFrame) const;
 
-    // UNPACK (commit): an edited AmpEnvelope -> the play params, in place.
+    // UNPACK (commit): an edited StageEnvelope -> the play params, in place.
-    void unpackEnvelope(const AmpEnvelope& env, std::int64_t frames, std::int64_t startFrame,
+    void unpackEnvelope(OverlayEnv which, const StageEnvelope& env, PlaySeconds& play) const;
-                        PlaySeconds& play) const;
+
+    // The radio control id that selects `which`, and its inverse. One table, so the deck's
+    // radio and the overlay can never drift apart.
+    static OverlayEnv overlayEnvForRadio(int radioId);
 
     // Clamp bounds envelope_edit uses, matching the sliders' own domains so a node drag can
     // never produce a param a slider couldn't.
@@ -417,16 +424,21 @@ private:
     WaveMarker waveMarker_ = WaveMarker::kStart;
     SetupMarkers dragStartMarkers_;
     std::int64_t dragSampleFrames_ = 0;   // decoded length of the sample under the drag
-    std::int64_t dragStartFrame_  = 0;   // effective start point at grab time; for env-node drag
 
     // Scrollbar-thumb drag: the offset at grab time. kDeckKnob drag: which control id.
     int dragStartScrollOffset_ = 0;
     int dragParamId_ = -1;           // control id under a kDeckKnob drag; -2 = preview-vel knob
+    // The cell whose INNER dial is under a kDeckKnob drag (dragParamId_ then holds the curve
+    // control), so the paint side can light the right ring. -1 when the grab was the outer knob.
+    int dragInnerCellId_ = -1;
 
-    // Envelope-node drag: which node + the AmpEnvelope snapshotted at grab (absolute-delta
+    // Which envelope the overlay draws and edits (kNone = none, the opening state).
+    OverlayEnv overlayEnv_ = OverlayEnv::kNone;
+
+    // Envelope-node drag: which node + the StageEnvelope snapshotted at grab (absolute-delta
     // contract, per envelope_edit's grabEnv).
     EnvNode envNode_ = EnvNode::Origin;
-    AmpEnvelope dragStartEnv_{};
+    StageEnvelope dragStartEnv_{};
 
     // Velocity-curve node drag: which point, the curve snapshotted at grab
     // (resolvePointDrag's absolute-delta contract), and the grab-time box rect.

tests/test_component_state_io.cpp

@@ -8,6 +8,7 @@
 
 #include "../src/core/instrument/map/component_state_io.h"
 #include "../src/core/instrument/engine/master_gain.h"  // masterGainMaxLinear (the v8 wire cap)
+#include "../src/core/util/curve_law.h"              // kCurveNeutral (the migration neutral)
 
 #include <cstdio>
 #include <cstring>
@@ -285,12 +286,17 @@ static void testComponentStateRoundTrip() {
     in.params.play.adsr.sustainLevel = 0.8;
     in.params.play.adsr.releaseSeconds = 0.15;
     in.params.play.trigger.lengthFraction = 0.75;
-    in.params.play.trigger.fadeInFrames = 441;
+    in.params.play.trigAhd = AhdSeconds{0.011, 0.022, 0.65, 2.5, 0.4};
-    in.params.play.trigger.fadeOutFrames = 882;
+    in.params.play.adsr.attackCurve = 3.0;
+    in.params.play.adsr.decayCurve = 0.3;
+    in.params.play.adsr.releaseCurve = 6.0;
+    in.params.play.filter.env.attackCurve = 1.25;
+    in.params.play.filter.env.decayCurve = 0.75;
+    in.params.play.filter.env.releaseCurve = 8.0;
+    in.params.play.filter.trigEnv = AhdSeconds{0.033, 0.044, 0.15, 0.2, 9.0};
     in.params.play.pitchEngine = PitchEngine::Preserve;
     in.params.play.pitchEnv.enabled = true;
-    in.params.play.pitchEnv.attackSeconds = 0.02;
+    in.params.play.pitchEnv.shape = AhdSeconds{0.02, 0.03, 0.45, 1.5, 0.6};
-    in.params.play.pitchEnv.decaySeconds = 0.03;
     in.params.play.pitchEnv.peakSemitones = 5.0;
 
     const std::vector<std::uint8_t> bytes = serializeComponentState(in);
@@ -331,12 +337,31 @@ static void testComponentStateRoundTrip() {
     CHECK(p.play.adsr.sustainLevel == 0.8);
     CHECK(p.play.adsr.releaseSeconds == 0.15);
     CHECK(p.play.trigger.lengthFraction == 0.75);
-    CHECK(p.play.trigger.fadeInFrames == 441);
+    // Every curve exponent, hold fraction and Trigger AHD field survives the round trip
-    CHECK(p.play.trigger.fadeOutFrames == 882);
+    // EXACTLY — the tail is doubles all the way down, so nothing quantizes.
+    CHECK(p.play.adsr.attackCurve == 3.0);
+    CHECK(p.play.adsr.decayCurve == 0.3);
+    CHECK(p.play.adsr.releaseCurve == 6.0);
+    CHECK(p.play.trigAhd.attackSeconds == 0.011);
+    CHECK(p.play.trigAhd.decaySeconds == 0.022);
+    CHECK(p.play.trigAhd.holdFraction == 0.65);
+    CHECK(p.play.trigAhd.attackCurve == 2.5);
+    CHECK(p.play.trigAhd.decayCurve == 0.4);
+    CHECK(p.play.filter.env.attackCurve == 1.25);
+    CHECK(p.play.filter.env.decayCurve == 0.75);
+    CHECK(p.play.filter.env.releaseCurve == 8.0);
+    CHECK(p.play.filter.trigEnv.attackSeconds == 0.033);
+    CHECK(p.play.filter.trigEnv.decaySeconds == 0.044);
+    CHECK(p.play.filter.trigEnv.holdFraction == 0.15);
+    CHECK(p.play.filter.trigEnv.attackCurve == 0.2);
+    CHECK(p.play.filter.trigEnv.decayCurve == 9.0);
     CHECK(p.play.pitchEngine == PitchEngine::Preserve);
     CHECK(p.play.pitchEnv.enabled);
-    CHECK(p.play.pitchEnv.attackSeconds == 0.02);
+    CHECK(p.play.pitchEnv.shape.attackSeconds == 0.02);
-    CHECK(p.play.pitchEnv.decaySeconds == 0.03);
+    CHECK(p.play.pitchEnv.shape.decaySeconds == 0.03);
+    CHECK(p.play.pitchEnv.shape.holdFraction == 0.45);
+    CHECK(p.play.pitchEnv.shape.attackCurve == 1.5);
+    CHECK(p.play.pitchEnv.shape.decayCurve == 0.6);
     CHECK(p.play.pitchEnv.peakSemitones == 5.0);
 }
 
@@ -401,12 +426,10 @@ static void testGoldenFullBlobFixture() {
     in.params.play.adsr.sustainLevel = 0.8;
     in.params.play.adsr.releaseSeconds = 0.15;
     in.params.play.trigger.lengthFraction = 0.75;
-    in.params.play.trigger.fadeInFrames = 100;
-    in.params.play.trigger.fadeOutFrames = 200;
     in.params.play.pitchEngine = PitchEngine::Preserve;
     in.params.play.pitchEnv.enabled = true;
-    in.params.play.pitchEnv.attackSeconds = 0.02;
+    in.params.play.pitchEnv.shape.attackSeconds = 0.02;
-    in.params.play.pitchEnv.decaySeconds = 0.03;
+    in.params.play.pitchEnv.shape.decaySeconds = 0.03;
     in.params.play.pitchEnv.peakSemitones = 5.0;
 
     const std::vector<std::uint8_t> bytes = serializeComponentState(in);
@@ -423,11 +446,11 @@ static void testGoldenFullBlobFixture() {
         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
         0x00,0x05,0x00,0x00,0x00,0x53,0x6e,0x61,0x72,0x65,0x13,0x00,0x00,0x00,0x67,0x75,
         0x69,0x64,0x2d,0x31,0x32,0x33,0x34,0x2d,0x35,0x36,0x37,0x38,0x2d,0x61,0x62,0x63,
-        0x64,0x04,0x00,0x00,0x00,0x6b,0x69,0x63,0x6b,0x00,0xff,0xff,0xff,0x09,0x00,0x00,
+        0x64,0x04,0x00,0x00,0x00,0x6b,0x69,0x63,0x6b,0x00,0xff,0xff,0xff,0x0a,0x00,0x00,
         0x00,0x01,0x24,0x00,0x00,0x00,0x01,0x01,0xe8,0x03,0x00,0x00,0x00,0x00,0x00,0x00,
         0x88,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xfa,0x00,0x00,0x00,0x00,0x00,0x00,
         0x00,0x01,0x9a,0x99,0x99,0x99,0x99,0x99,0xa9,0x3f,0x00,0x00,0x00,0x00,0x00,0x00,
-        0xe8,0x3f,0x64,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xc8,0x00,0x00,0x00,0x00,0x00,
+        0xe8,0x3f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
         0x00,0x00,0x01,0x01,0x7b,0x14,0xae,0x47,0xe1,0x7a,0x94,0x3f,0xb8,0x1e,0x85,0xeb,
         0x51,0xb8,0x9e,0x3f,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x40,0x7b,0x14,0xae,0x47,
         0xe1,0x7a,0x84,0x3f,0x7b,0x14,0xae,0x47,0xe1,0x7a,0x94,0x3f,0x9a,0x99,0x99,0x99,
@@ -457,6 +480,27 @@ static void testGoldenFullBlobFixture() {
         0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,         //   amp        0.0
         0x00,0x00,0x00,0x00,0x00,0xc0,0x5f,0x40,         //   velocity 127.0
         0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         //   amp        1.0
+        // --- payload v10 staged-curve tail, at its NEUTRAL default (this fixture sets no
+        // curve or AHD field), in the header's documented order ---
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // amp attack curve   1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // amp decay curve    1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // amp release curve  1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,         // trig AHD attack    0.0 s
+        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,         // trig AHD decay     0.0 s
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // trig AHD hold      1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // trig AHD att curve 1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // trig AHD dec curve 1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,         // pitch hold         0.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // pitch attack curve 1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // pitch decay curve  1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // filt attack curve  1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // filt decay curve   1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // filt release curve 1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,         // filt AHD attack    0.0 s
+        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,         // filt AHD decay     0.0 s
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // filt AHD hold      1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // filt AHD att curve 1.0
+        0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x3f,         // filt AHD dec curve 1.0
     };
     // clang-format on
     CHECK(bytes.size() == sizeof(kGolden));
@@ -504,12 +548,13 @@ static void testEnvelopePrefixBytesFrozen() {
         CHECK(bytes[4] == 0);  // ChannelMode::Mono
     }
     CHECK(kComponentStateVersion == 11);
-    CHECK(kParamsPayloadVersion == 9);
+    CHECK(kParamsPayloadVersion == 10);
     CHECK(kParamsSingleRecordVersion == 8);
     CHECK(kParamsFormatMarker == 0xFFFFFF00u);
-    // The filter tail rode a PAYLOAD bump, not an envelope one — the two axes stay
+    // The filter and staged-curve tails rode PAYLOAD bumps, not envelope ones — the two axes
-    // independent, so a future envelope field cannot collide with it on one number.
+    // stay independent, so a future envelope field cannot collide with either on one number.
     CHECK(kParamsFilterVersion > kParamsSingleRecordVersion);
+    CHECK(kParamsCurveVersion > kParamsFilterVersion);
 }
 
 // --- The filter tail (payload v9) --------------------------------------------
@@ -707,13 +752,46 @@ static void testSingleZoneMigrationIsLossless() {
     CHECK(p.play.adsr.sustainLevel == 0.8);
     CHECK(p.play.adsr.releaseSeconds == 0.15);
     CHECK(p.play.trigger.lengthFraction == 0.75);
-    CHECK(p.play.trigger.fadeInFrames == 100);
+    // The retired fade pair lifts onto the AHD that replaced it: attack <- fade-in, decay <-
-    CHECK(p.play.trigger.fadeOutFrames == 200);
+    // fade-out (source frames over the project rate), hold <- the whole remainder.
+    CHECK(p.play.trigAhd.attackSeconds == 100.0 / 48000.0);
+    CHECK(p.play.trigAhd.decaySeconds == 200.0 / 48000.0);
+    CHECK(p.play.trigAhd.holdFraction == 1.0);
     CHECK(p.play.pitchEngine == PitchEngine::Preserve);
     CHECK(p.play.pitchEnv.enabled);
-    CHECK(p.play.pitchEnv.attackSeconds == 0.02);
+    CHECK(p.play.pitchEnv.shape.attackSeconds == 0.02);
-    CHECK(p.play.pitchEnv.decaySeconds == 0.03);
+    CHECK(p.play.pitchEnv.shape.decaySeconds == 0.03);
     CHECK(p.play.pitchEnv.peakSemitones == 5.0);
+    // Everything the change added lifts to its own neutral, so the loaded instance plays as
+    // the saved one did: every exponent linear, and the pitch envelope with no hold stage.
+    CHECK(p.play.adsr.attackCurve == util::kCurveNeutral);
+    CHECK(p.play.adsr.decayCurve == util::kCurveNeutral);
+    CHECK(p.play.adsr.releaseCurve == util::kCurveNeutral);
+    CHECK(p.play.trigAhd.attackCurve == util::kCurveNeutral);
+    CHECK(p.play.trigAhd.decayCurve == util::kCurveNeutral);
+    CHECK(p.play.pitchEnv.shape.holdFraction == 0.0);
+    CHECK(p.play.filter.env.attackCurve == util::kCurveNeutral);
+}
+
+// A prior ZERO fade-out lands Decay = 0: the abrupt end an old Trigger instance could express
+// stays representable under the AHD, which is what makes the consolidation lossless rather
+// than merely close.
+static void testZeroFadeOutMigratesToZeroDecay() {
+    legacy::Zone z;
+    z.sampleId = "kick";
+    z.lowNote = 0;
+    z.highNote = 127;
+    z.trigger = true;
+    z.lengthFraction = 1.0;
+    z.fadeIn = 441;
+    z.fadeOut = 0;
+    const ComponentState out =
+        deserializeComponentState(legacy::envelopeWithZones("kick", {z}, 7), 44100.0);
+    const PlaySeconds& play = out.params.play;
+    CHECK(play.playMode == PlayMode::Trigger);
+    CHECK(play.trigAhd.attackSeconds == 441.0 / 44100.0);
+    CHECK(play.trigAhd.decaySeconds == 0.0);
+    CHECK(play.trigAhd.holdFraction == 1.0);
 }
 
 // A legacy OVERRIDE THAT DISABLES THE LOOP migrates as a PRESENT loopOverride with hasLoop
@@ -872,8 +950,8 @@ static void testLegacyV3FramesConvertAtTheProjectRate() {
     const ComponentState st = deserializeComponentState(out, 48000.0);
     CHECK(st.selectionId == "kick");
     CHECK(st.params.play.adsr.holdSeconds == 0.05);
-    CHECK(st.params.play.pitchEnv.attackSeconds == 0.02);
+    CHECK(st.params.play.pitchEnv.shape.attackSeconds == 0.02);
-    CHECK(st.params.play.pitchEnv.decaySeconds == 0.03);
+    CHECK(st.params.play.pitchEnv.shape.decaySeconds == 0.03);
     CHECK(st.params.play.pitchEnv.peakSemitones == 5.0);
     // A/D/S/R are absent in v3 -> the tier-0 seconds defaults hold.
     CHECK(st.params.play.adsr.attackSeconds == AdsrSeconds{}.attackSeconds);
@@ -1001,11 +1079,11 @@ static void testSampleRefsTruncatedMidEntry() {
     // The tail after the refs table is instanceGuid(4, empty) + selectionId(4+4="kick") +
     // the current params payload for DEFAULT params (marker4+version4 + overrides3 + the
     // 91-byte play tail + keyTrack8 + curve(4+2*16, the flat 2-point default) + the 134-byte
-    // v9 filter tail) = 292 bytes; entry two is 47 bytes (id 4+3, path 4+7, root4, loop
+    // v9 filter tail + the 160-byte v10 staged-curve tail) = 452 bytes; entry two is 47 bytes
-    // 1+8+8, channels4, name 4+0). Cutting 312 keeps the first 27 of entry two's 47 — mid
+    // (id 4+3, path 4+7, root4, loop 1+8+8, channels4, name 4+0). Cutting 472 keeps the first
-    // loop.start (offset 23..31).
+    // 27 of entry two's 47 — mid loop.start (offset 23..31).
-    CHECK(bytes.size() > 312);
+    CHECK(bytes.size() > 472);
-    bytes.resize(bytes.size() - 312);
+    bytes.resize(bytes.size() - 472);
     const ComponentState back = deserializeComponentState(bytes, 44100.0);
     CHECK(back.sampleRefs.size() == 1);
     CHECK(back.sampleRefs.size() == 1 && back.sampleRefs[0].sampleId == "kick");
@@ -1087,6 +1165,7 @@ int main() {
     testEnvelopePrefixBytesFrozen();
     testWriterEmitsCurrentPayloadVersion();
     testSingleZoneMigrationIsLossless();
+    testZeroFadeOutMigratesToZeroDecay();
     testSingleZoneMigrationLiftsLoopDisablingOverride();
     testLiftedStateReSavesInCurrentFormat();
     testMultiZoneMigrationAdoptsFirstZone();

tests/test_curve_law.cpp

@@ -0,0 +1,120 @@
+// Standalone tests for reasampler::util::curve_law — no VST3, no REAPER, no framework. Same
+// fast assert loop as the sibling pure tests. This is the ONE law behind the engine's segment
+// evaluator, the overlay's knot geometry, and the deck's inner dial, so what it guarantees is
+// what all three inherit.
+//
+// Covers: the LINEAR NEUTRAL (exponent 1.0 returns its input BIT-IDENTICALLY, which is what
+// makes a pre-existing instance play unchanged); endpoint exactness at every exponent (no
+// segment can overshoot its own endpoint levels); monotonicity and finiteness across the full
+// 0.1..10 domain including both endpoints; the mid-level inverse the overlay knot drags
+// through, and its round trip against the exponent.
+
+#include "../src/core/util/curve_law.h"
+
+#include <cmath>
+#include <cstdio>
+
+using namespace reasampler::util;
+
+static int g_fail = 0;
+#define CHECK(cond) do { if(!(cond)) { \
+    std::printf("FAIL line %d: %s\n", __LINE__, #cond); ++g_fail; } } while(0)
+
+// The neutral is not merely "close to linear" — it must be the identity, bit for bit, or a
+// blob that loaded at 1.0 would render differently from the engine that wrote it.
+static void testNeutralExponentIsTheIdentity() {
+    for (int i = 0; i <= 1000; ++i) {
+        const double phi = static_cast<double>(i) / 1000.0;
+        CHECK(curveMap(phi, kCurveNeutral) == phi);
+    }
+    // Including the values a fractional stage position actually takes.
+    CHECK(curveMap(1.0 / 3.0, 1.0) == 1.0 / 3.0);
+    CHECK(curveMap(0.1234567890123, 1.0) == 0.1234567890123);
+}
+
+// Both endpoints are exact at every exponent, which is the whole overshoot guarantee: a curved
+// stage starts where the previous one ended and ends where the next one starts.
+static void testEndpointsAreExactAtEveryExponent() {
+    for (int i = 0; i <= 100; ++i) {
+        const double e = kCurveMin + (kCurveMax - kCurveMin) * (i / 100.0);
+        CHECK(curveMap(0.0, e) == 0.0);
+        CHECK(curveMap(1.0, e) == 1.0);
+    }
+}
+
+// The full domain, both endpoints included: finite, in range, and strictly rising.
+static void testSweepIsFiniteMonotoneAndInRange() {
+    const double exps[] = {kCurveMin, 0.25, 0.5, kCurveNeutral, 2.0, 4.0, kCurveMax};
+    for (double e : exps) {
+        double prev = -1.0;
+        for (int i = 0; i <= 500; ++i) {
+            const double phi = static_cast<double>(i) / 500.0;
+            const double v = curveMap(phi, e);
+            CHECK(std::isfinite(v));
+            CHECK(v >= 0.0 && v <= 1.0);
+            CHECK(v > prev - 1e-15);  // non-decreasing
+            prev = v;
+        }
+        CHECK(std::fabs(prev - 1.0) < 1e-12);
+    }
+}
+
+// Which side of the neutral an exponent falls on is the SHAPE, and the two directions must not
+// collapse into each other.
+static void testExponentDirectionShapesTheSegment() {
+    CHECK(curveMap(0.5, 4.0) < curveMap(0.5, kCurveNeutral));
+    CHECK(curveMap(0.5, 0.25) > curveMap(0.5, kCurveNeutral));
+    CHECK(std::fabs(curveMap(0.5, kCurveNeutral) - 0.5) < 1e-15);
+}
+
+static void testClampCurveHoldsTheDomain() {
+    CHECK(clampCurve(-5.0) == kCurveMin);
+    CHECK(clampCurve(0.0) == kCurveMin);
+    CHECK(clampCurve(1e9) == kCurveMax);
+    CHECK(clampCurve(std::nan("")) == kCurveMin);  // a corrupt blob degrades, never propagates
+    CHECK(clampCurve(2.5) == 2.5);
+}
+
+// The mid-level inverse is what a knot drag resolves through: it must be the exact inverse of
+// the forward reading over the whole domain, or the knot and the dial could drift.
+static void testMidLevelRoundTripsAgainstTheExponent() {
+    for (int i = 0; i <= 200; ++i) {
+        const double e = kCurveMin + (kCurveMax - kCurveMin) * (i / 200.0);
+        const double mid = curveMidLevel(e);
+        CHECK(mid > 0.0 && mid < 1.0);
+        CHECK(std::fabs(curveFromMidLevel(mid) - e) < 1e-9);
+    }
+    // The mid-level is strictly DECREASING in the exponent, so a drag has one unambiguous
+    // direction at every point of the domain.
+    double prev = 1.0;
+    for (int i = 0; i <= 200; ++i) {
+        const double e = kCurveMin + (kCurveMax - kCurveMin) * (i / 200.0);
+        const double mid = curveMidLevel(e);
+        CHECK(mid < prev);
+        prev = mid;
+    }
+}
+
+// A knot dragged past what the domain can express saturates rather than producing a
+// non-finite exponent.
+static void testMidLevelInverseSaturates() {
+    CHECK(curveFromMidLevel(0.0) == kCurveMax);
+    CHECK(curveFromMidLevel(-1.0) == kCurveMax);
+    CHECK(curveFromMidLevel(1.0) == kCurveMin);
+    CHECK(curveFromMidLevel(5.0) == kCurveMin);
+    CHECK(curveFromMidLevel(std::nan("")) == kCurveMax);
+    CHECK(std::fabs(curveFromMidLevel(0.5) - kCurveNeutral) < 1e-12);
+}
+
+int main() {
+    testNeutralExponentIsTheIdentity();
+    testEndpointsAreExactAtEveryExponent();
+    testSweepIsFiniteMonotoneAndInRange();
+    testExponentDirectionShapesTheSegment();
+    testClampCurveHoldsTheDomain();
+    testMidLevelRoundTripsAgainstTheExponent();
+    testMidLevelInverseSaturates();
+    if (g_fail == 0) std::printf("curve_law: all tests passed\n");
+    else std::printf("curve_law: %d FAILED\n", g_fail);
+    return g_fail == 0 ? 0 : 1;
+}

tests/test_deck_groups.cpp

@@ -78,6 +78,89 @@ static void testFilterGroupCarriesItsFiveToneControlsPlusModulation() {
     CHECK(fe.rowToggle.id == -1);
 }
 
+// Exactly the three envelope decks carry an overlay-select radio, each its own, and no other
+// group has one — the exclusivity the shell enforces is only meaningful if the id space is.
+static void testOnlyTheThreeEnvelopeDecksCarryARadio() {
+    for (PlayMode mode : {PlayMode::Gate, PlayMode::Trigger}) {
+        const std::vector<DeckGroupDesc> g = sampleDeckGroups(mode);
+        int radios = 0;
+        for (const DeckGroupDesc& d : g) {
+            if (d.captionRadio.id < 0) continue;
+            ++radios;
+            const int want = d.id == kGroupAmpEnv      ? cell(DeckParam::kAmpEnvSelect)
+                           : d.id == kGroupPitchEnv    ? cell(DeckParam::kPitchEnvSelect)
+                           : d.id == kGroupFilterEnv   ? cell(DeckParam::kFilterEnvSelect)
+                                                       : -1;
+            CHECK(d.captionRadio.id == want);
+        }
+        CHECK(radios == 3);
+    }
+}
+
+// The mode-driven shape switch, on BOTH the amp and the filter envelope: Gate shows the
+// AHDSR's five stages, Trigger the AHD's three (behind the play span on the amp deck), and
+// neither mode leaks the other's controls onto the deck.
+static void testGateAndTriggerFacesCarryTheirOwnShapes() {
+    const std::vector<DeckGroupDesc> gate = sampleDeckGroups(PlayMode::Gate);
+    const std::vector<DeckGroupDesc> trig = sampleDeckGroups(PlayMode::Trigger);
+    const DeckGroupDesc& gAmp = gate[static_cast<std::size_t>(indexOfGroup(gate, kGroupAmpEnv))];
+    const DeckGroupDesc& tAmp = trig[static_cast<std::size_t>(indexOfGroup(trig, kGroupAmpEnv))];
+    const std::vector<int> gateAmp = {cell(DeckParam::kAttack), cell(DeckParam::kHold),
+                                      cell(DeckParam::kDecay), cell(DeckParam::kSustain),
+                                      cell(DeckParam::kRelease)};
+    const std::vector<int> trigAmp = {cell(DeckParam::kTrigLength), cell(DeckParam::kTrigAttack),
+                                      cell(DeckParam::kTrigHold), cell(DeckParam::kTrigDecay),
+                                      -1};
+    CHECK(gAmp.cellIds == gateAmp);
+    CHECK(tAmp.cellIds == trigAmp);
+
+    const DeckGroupDesc& gFe = gate[static_cast<std::size_t>(indexOfGroup(gate, kGroupFilterEnv))];
+    const DeckGroupDesc& tFe = trig[static_cast<std::size_t>(indexOfGroup(trig, kGroupFilterEnv))];
+    const std::vector<int> trigFe = {cell(DeckParam::kFilterTrigAttack),
+                                     cell(DeckParam::kFilterTrigHold),
+                                     cell(DeckParam::kFilterTrigDecay), -1, -1};
+    CHECK(tFe.cellIds == trigFe);
+    CHECK(gFe.cellIds != tFe.cellIds);
+    // Same cell count either way, so the group's width — and its neighbours' placement —
+    // survives a mode flip.
+    CHECK(gFe.cellIds.size() == tFe.cellIds.size());
+    CHECK(deckGroupWidth(gFe) == deckGroupWidth(tFe));
+}
+
+// Every SLOPED stage knob carries an inner curve dial; Hold, Sustain, and everything that is
+// not a stage carries none. This is the "which segments are sloped" rule, asserted rather than
+// read.
+static void testOnlySlopedStageKnobsCarryAnInnerCurveDial() {
+    const DeckParam sloped[] = {
+        DeckParam::kAttack, DeckParam::kDecay, DeckParam::kRelease,
+        DeckParam::kTrigAttack, DeckParam::kTrigDecay,
+        DeckParam::kPitchEnvAttack, DeckParam::kPitchEnvDecay,
+        DeckParam::kFilterEnvAttack, DeckParam::kFilterEnvDecay, DeckParam::kFilterEnvRelease,
+        DeckParam::kFilterTrigAttack, DeckParam::kFilterTrigDecay,
+    };
+    for (DeckParam p : sloped) {
+        const DeckParam c = curveParamFor(p);
+        CHECK(c != DeckParam::kCount);
+        // A curve control is itself flat — no inner dial on an inner dial.
+        CHECK(curveParamFor(c) == DeckParam::kCount);
+    }
+    const DeckParam flat[] = {
+        DeckParam::kHold, DeckParam::kSustain, DeckParam::kTrigHold,
+        DeckParam::kPitchEnvHold, DeckParam::kFilterEnvHold, DeckParam::kFilterEnvSustain,
+        DeckParam::kFilterTrigHold, DeckParam::kTrigLength, DeckParam::kPitchEnvDepth,
+        DeckParam::kFilterCutoff, DeckParam::kMasterGain, DeckParam::kKeyTrack,
+    };
+    for (DeckParam p : flat) CHECK(curveParamFor(p) == DeckParam::kCount);
+
+    // Every sloped knob maps to a DISTINCT curve control — a copy-paste that pointed two
+    // stages at one exponent would tie two dials together silently.
+    for (std::size_t i = 0; i < sizeof(sloped) / sizeof(sloped[0]); ++i) {
+        for (std::size_t j = i + 1; j < sizeof(sloped) / sizeof(sloped[0]); ++j) {
+            CHECK(curveParamFor(sloped[i]) != curveParamFor(sloped[j]));
+        }
+    }
+}
+
 static void testAmpGroupWidthSurvivesAGateTriggerFlip() {
     // The reserved blanks are what stop a mode flip reflowing the groups beside AMP.
     const std::vector<DeckGroupDesc> gate = sampleDeckGroups(PlayMode::Gate);
@@ -86,7 +169,7 @@ static void testAmpGroupWidthSurvivesAGateTriggerFlip() {
     const DeckGroupDesc& b = trig[static_cast<std::size_t>(indexOfGroup(trig, kGroupAmpEnv))];
     CHECK(deckGroupWidth(a) == deckGroupWidth(b));
     CHECK(a.cellIds.size() == b.cellIds.size());
-    CHECK(b.cellIds[3] == -1 && b.cellIds[4] == -1);
+    CHECK(b.cellIds[4] == -1);  // the Trigger face's one reserved blank
     // Every other group is mode-independent, so the whole deck's height is too.
     CHECK(deckHeight(gate, kAvailAtMinWidth) == deckHeight(trig, kAvailAtMinWidth));
 }
@@ -188,16 +271,25 @@ static void testBipolarKnobLawRoundTripsAndIsExactAtCentre() {
 }
 
 static void testEveryDeckControlIsClassifiedLiveOrReloading() {
-    // The live set: the six filter tone/modulation knobs, plus every stage time and stage
+    // The live set: the six filter tone/modulation knobs, plus every stage time, stage level,
-    // level on all three envelopes.
+    // hold fraction and curve exponent on all three envelopes — in BOTH mode shapes.
     const DeckParam live[] = {
         DeckParam::kFilterMorph, DeckParam::kFilterCutoff, DeckParam::kFilterQ,
         DeckParam::kFilterDrive, DeckParam::kFilterModAmt, DeckParam::kFilterKeyTrack,
         DeckParam::kAttack, DeckParam::kHold, DeckParam::kDecay, DeckParam::kSustain,
         DeckParam::kRelease,
+        DeckParam::kTrigAttack, DeckParam::kTrigHold, DeckParam::kTrigDecay,
         DeckParam::kFilterEnvAttack, DeckParam::kFilterEnvHold, DeckParam::kFilterEnvDecay,
         DeckParam::kFilterEnvSustain, DeckParam::kFilterEnvRelease,
-        DeckParam::kPitchEnvAttack, DeckParam::kPitchEnvDecay, DeckParam::kPitchEnvDepth,
+        DeckParam::kFilterTrigAttack, DeckParam::kFilterTrigHold, DeckParam::kFilterTrigDecay,
+        DeckParam::kPitchEnvAttack, DeckParam::kPitchEnvHold, DeckParam::kPitchEnvDecay,
+        DeckParam::kPitchEnvDepth,
+        DeckParam::kAttackCurve, DeckParam::kDecayCurve, DeckParam::kReleaseCurve,
+        DeckParam::kTrigAttackCurve, DeckParam::kTrigDecayCurve,
+        DeckParam::kPitchEnvAttackCurve, DeckParam::kPitchEnvDecayCurve,
+        DeckParam::kFilterEnvAttackCurve, DeckParam::kFilterEnvDecayCurve,
+        DeckParam::kFilterEnvReleaseCurve,
+        DeckParam::kFilterTrigAttackCurve, DeckParam::kFilterTrigDecayCurve,
     };
     for (DeckParam p : live) CHECK(isLiveDeckParam(p));
 
@@ -206,8 +298,9 @@ static void testEveryDeckControlIsClassifiedLiveOrReloading() {
     const DeckParam reloads[] = {
         DeckParam::kPlayMode, DeckParam::kPitchEngine, DeckParam::kPitchEnvEnable,
         DeckParam::kFilterEnable, DeckParam::kFilterLaw, DeckParam::kFilterVel,
-        DeckParam::kKeyTrack, DeckParam::kTrigLength, DeckParam::kTrigFadeIn,
+        DeckParam::kKeyTrack, DeckParam::kTrigLength,
-        DeckParam::kTrigFadeOut, DeckParam::kVoiceCount, DeckParam::kVoiceMode,
+        DeckParam::kAmpEnvSelect, DeckParam::kPitchEnvSelect, DeckParam::kFilterEnvSelect,
+        DeckParam::kVoiceCount, DeckParam::kVoiceMode,
         DeckParam::kMonoTrigger, DeckParam::kMasterGain,
     };
     for (DeckParam p : reloads) CHECK(!isLiveDeckParam(p));
@@ -228,28 +321,24 @@ static void testEveryDeckControlIsClassifiedLiveOrReloading() {
 static void testOnlyALiveControlsDragTakesTheLiveTier() {
     // isLiveDeckParam alone is not what a user experiences — liveCommitFor is, at the editor's
     // commit site. Inverting it has to FAIL a test rather than merely read wrong.
-    CHECK(liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kFilterCutoff),
+    CHECK(liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kFilterCutoff)));
-                        PlayMode::Gate));
+    CHECK(liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kAttack)));
-    // A knob's routing is the knob's, not the play mode's.
+    // The Trigger amp is live now that the fade pair folded into the AHD — the one behavioural
-    CHECK(liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kAttack),
+    // consequence of that consolidation.
-                        PlayMode::Trigger));
+    CHECK(liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kTrigAttack)));
-    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kTrigFadeIn),
+    CHECK(liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kTrigDecayCurve)));
-                         PlayMode::Trigger));
+    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kTrigLength)));
-    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kMasterGain),
+    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kMasterGain)));
-                         PlayMode::Gate));
+    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kAmpEnvSelect)));
     // The shell's processor-side sentinels (preview velocity is -2) and any out-of-range id
     // are not parameter-set controls, so they must never reach the enum.
-    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, -2, PlayMode::Gate));
+    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, -2));
-    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, -1, PlayMode::Gate));
+    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, -1));
-    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kCount),
+    CHECK(!liveCommitFor(LiveDragKind::kDeckKnob, static_cast<int>(DeckParam::kCount)));
-                         PlayMode::Gate));
+    // Every stage value an envelope node can reach is live, in either mode shape.
-    // An envelope-node drag edits the AHDSR in Gate; the same drag in Trigger rewrites the
+    CHECK(liveCommitFor(LiveDragKind::kEnvNode, -1));
-    // play span, which is not a live control.
-    CHECK(liveCommitFor(LiveDragKind::kEnvNode, -1, PlayMode::Gate));
-    CHECK(!liveCommitFor(LiveDragKind::kEnvNode, -1, PlayMode::Trigger));
     // Every other drag (markers, scrollbar, curve nodes) commits through a reload.
-    CHECK(!liveCommitFor(LiveDragKind::kOther, static_cast<int>(DeckParam::kFilterCutoff),
+    CHECK(!liveCommitFor(LiveDragKind::kOther, static_cast<int>(DeckParam::kFilterCutoff)));
-                         PlayMode::Gate));
 }
 
 int main() {
@@ -257,6 +346,9 @@ int main() {
     testOnlyALiveControlsDragTakesTheLiveTier();
     testDeckReadsPitchThenFilterThenAmpLeftToRight();
     testFilterGroupCarriesItsFiveToneControlsPlusModulation();
+    testOnlyTheThreeEnvelopeDecksCarryARadio();
+    testGateAndTriggerFacesCarryTheirOwnShapes();
+    testOnlySlopedStageKnobsCarryAnInnerCurveDial();
     testAmpGroupWidthSurvivesAGateTriggerFlip();
     testWrappedDeckHeightAtTheEditorFloorWidth();
     testDeckFitsInsideTheEnforcedMinimumWindow();

tests/test_envelope_edit.cpp

@@ -1,24 +1,19 @@
-// Standalone tests for reasampler::instrument::ui::envelope_edit — no VST3, no REAPER, no framework.
+// Standalone tests for reasampler::instrument::ui::envelope_edit — no VST3, no REAPER, no
-// Same fast assert loop as the sibling pure tests. Assert the S-VIEW-3 draggable-node INVERSE
+// framework. Same fast assert loop as the sibling pure tests. Assert the INVERSE (edit) map
-// map: node hit-test + pixel-delta -> clamped/monotonic param set, HARD at the clamp + monotonic
+// against envelope_overlay's forward map: a grab lands on the node that was drawn there, and a
-// boundaries (the load-bearing "a drag can never produce a param a slider couldn't" invariant).
+// pixel delta produces exactly the param a knob would have.
 //
-// Covers: nodeAtPoint (grabs a drawn handle within the pick radius; misses off every node; skips
+// Covers: nodeAtPoint (every drawn handle grabbable, the anchored ReleaseEnd and the Origin
-// the non-draggable Origin/ReleaseStart anchors AND other-mode nodes; NEAREST-node-wins with
+// never grabbed, other-kind nodes rejected, misses outside the radius); resolveNodeDrag
-// draw-order tie-break; EVERY Gate node individually grabbable at the tier-0 defaults — FA2);
+// (AHDSR stage times at the schematic scale, the sustain level on Y, the release dragged from
-// resolveNodeDrag Gate (each cumulative node edits its OWN segment at the PARAM-DOMAIN px scale;
+// its START with the inverted sign, the caller's clamp domain, AHD stage times at the 1:1
-// X->time, sustain node's Y->level; lower clamp at 0; upper clamp at the caller's max; only the
+// scale, the hold FRACTION); curve-knot drags (the exponent domain, its endpoints, and the
-// dragged param changes; ReleaseEnd grabbable + draggable; per-node drag round-trip tracks the
+// round trip through the shared law that keeps knot and dial on one value); degenerate no-ops.
-// cursor ~1:1 — FA2); resolveNodeDrag Trigger (fades as fractions of the played span;
-// fadeIn/fadeOut mutual clamp so they never cross; length clamp; FadeOutStart moves OPPOSITE the
-// pixel delta; zero-fade-out node grabbable at the right edge and draggable inward — FA2);
-// degenerate area/duration + non-draggable node + cross-mode node -> no motion.
 
 #include "../src/core/instrument/ui/envelope_edit.h"
 
 #include <cmath>
 #include <cstdio>
-#include <cstdlib>
 #include <vector>
 
 using namespace reasampler;
@@ -28,9 +23,41 @@ static int g_fail = 0;
 #define CHECK(cond) do { if(!(cond)) { \
     std::printf("FAIL line %d: %s\n", __LINE__, #cond); ++g_fail; } } while(0)
 
-static bool near(double a, double b, double eps = 1e-9) { return std::fabs(a - b) <= eps; }
+static OverlayArea overlayOf(const Rect& r) { return OverlayArea{r}; }
+static Rect wideArea() { return Rect::ltrb(20, 10, 1020, 110); }  // width 1000, height 100
+static constexpr double kTotal = 4.0;
+
+static EnvClampBounds bounds() {
+    EnvClampBounds b;
+    b.maxAttackSeconds = 2.0;
+    b.maxHoldSeconds = 2.0;
+    b.maxDecaySeconds = 2.0;
+    b.maxReleaseSeconds = 2.0;
+    return b;
+}
+
+static StageEnvelope ahdsrEnv() {
+    StageEnvelope e;
+    e.kind = EnvKind::Ahdsr;
+    e.attackSeconds = 0.3;
+    e.holdSeconds = 0.2;
+    e.decaySeconds = 0.4;
+    e.sustainLevel = 0.6;
+    e.releaseSeconds = 0.5;
+    return e;
+}
+
+static StageEnvelope ahdEnv() {
+    StageEnvelope e;
+    e.kind = EnvKind::Ahd;
+    e.attackSeconds = 0.4;
+    e.decaySeconds = 0.6;
+    e.holdFraction = 0.5;
+    e.originSeconds = 0.0;
+    e.spanSeconds = 3.0;
+    return e;
+}
 
-// Find the first vertex with a given node in a polyline; asserts presence via the returned bool.
 static bool findNode(const std::vector<EnvVertex>& poly, EnvNode node, EnvVertex& out) {
     for (const EnvVertex& v : poly) {
         if (v.node == node) { out = v; return true; }
@@ -38,348 +65,242 @@ static bool findNode(const std::vector<EnvVertex>& poly, EnvNode node, EnvVertex
     return false;
 }
 
-// 1000px wide, 100px tall, offset origin. Trigger scale: 2.0s over 1000px => 0.002 s/px. Gate
+// Grab exactly where the forward map drew the node.
-// scale (FA2 param-domain schematic — sample-length-free): (850-1-32)px over the 8.0s schematic
+static NodeHit grabAt(const StageEnvelope& e, EnvNode node) {
-// domain => 102.125 px/s, each segment prefixed by the 8px separation base; the gateEnv() nodes
-// draw at A x@28, H x@47, D x@85, RS x@235, RE x@284.
-static Rect wideArea() { return Rect::ltrb(20, 10, 1020, 110); }
-static constexpr double kTotal = 2.0;
-
-static OverlayArea overlayOf(const Rect& r) { return OverlayArea{r}; }
-static const double kGateSecPerPx = 1.0 / gatePxPerSecond(wideArea());
-
-static AmpEnvelope gateEnv() {
-    AmpEnvelope e;
-    e.mode = EnvMode::Gate;
-    e.attackSeconds  = 0.2;
-    e.holdSeconds    = 0.1;
-    e.decaySeconds   = 0.3;
-    e.sustainLevel   = 0.5;
-    e.releaseSeconds = 0.4;
-    return e;
-}
-
-static AmpEnvelope triggerEnv() {
-    AmpEnvelope e;
-    e.mode = EnvMode::Trigger;
-    e.lengthFraction  = 0.5;   // played span 1.0s -> 500px
-    e.fadeInFraction  = 0.2;
-    e.fadeOutFraction = 0.2;
-    return e;
-}
-
-// --- nodeAtPoint --------------------------------------------------------------
-
-static void testHitGrabsDrawnHandle() {
-    const AmpEnvelope e = gateEnv();
     const Rect a = wideArea();
-    // AttackEnd draws at x = left+28 (8px base + 0.2s * 102.125 px/s), y = top (level 1).
+    EnvVertex v;
-    NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, a.x + 28, a.y);
+    if (!findNode(buildEnvelopePolyline(e, overlayOf(a), kTotal), node, v)) return NodeHit{};
-    CHECK(h.hit && h.node == EnvNode::AttackEnd);
+    return nodeAtPoint(e, overlayOf(a), kTotal, v.x, v.y);
-    // The sustain node (DecayEnd) at left+85, level 0.5 -> ~top+50.
-    NodeHit s = nodeAtPoint(e, overlayOf(a), kTotal, a.x + 85, a.y + 50);
-    CHECK(s.hit && s.node == EnvNode::DecayEnd);
 }
 
-static void testHitMissesOffEveryNode() {
+// --- hit-test ------------------------------------------------------------------
-    const AmpEnvelope e = gateEnv();
+
-    const Rect a = wideArea();
+static void testEveryDrawnHandleIsGrabbable() {
-    // A point far from any drawn handle (right of the release ramp, well away from a node).
+    const StageEnvelope e = ahdsrEnv();
-    NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, a.x + 700, a.y + 5);
+    const EnvNode want[] = {EnvNode::AttackEnd,    EnvNode::HoldEnd,     EnvNode::DecayEnd,
-    CHECK(!h.hit);
+                            EnvNode::ReleaseStart, EnvNode::AttackCurve, EnvNode::DecayCurve,
+                            EnvNode::ReleaseCurve};
+    for (EnvNode n : want) {
+        const NodeHit h = grabAt(e, n);
+        CHECK(h.hit);
+        CHECK(h.node == n);
+    }
 }
 
-static void testHitSkipsNonDraggableAnchors() {
+static void testAnchoredEndAndOriginAreNotGrabbable() {
-    const AmpEnvelope e = gateEnv();
+    const StageEnvelope e = ahdsrEnv();
-    const Rect a = wideArea();
-    // Origin draws at (left, bottom-1). Even a pixel-perfect grab there is NOT a draggable node.
-    NodeHit o = nodeAtPoint(e, overlayOf(a), kTotal, a.x, a.bottom() - 1);
-    CHECK(!o.hit);
-    // ReleaseStart draws at (left+235, sustain level ~top+50) — the fixed plateau end. It is
-    // drawing-only -> not grabbable; no other node is within the radius, so this grab misses.
-    NodeHit rs = nodeAtPoint(e, overlayOf(a), kTotal, a.x + 235, a.y + 50);
-    CHECK(!rs.hit);
-}
-
-static void testHitNearestNodeWinsOverDrawOrder() {
-    // FA2 nearest-wins: with a SHORT hold, AttackEnd (x@28) and HoldEnd (x@37 — the 8px base
-    // plus 0.01s ~= 1px) both fall within the grab radius of a point at x@33 — the NEAREST
-    // (HoldEnd, 4px) must win, not the earlier draw-order AttackEnd (5px), so tightly packed
-    // handles stay individually grabbable.
-    AmpEnvelope e = gateEnv();
-    e.holdSeconds = 0.01;
-    const Rect a = wideArea();
-    NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, a.x + 33, a.y);
-    CHECK(h.hit && h.node == EnvNode::HoldEnd);
-}
-
-static void testGateDefaultsEveryNodeGrabbable() {
-    // THE FA2 headline regression: at the tier-0 Gate defaults (attack 3ms, hold 0, decay 0,
-    // sustain 1.0, release 60ms) the forward map's kGateNodeSepPx separation keeps every
-    // draggable node distinct, and a grab AT each drawn vertex resolves to THAT node — HoldEnd
-    // and DecayEnd are no longer shadowed by AttackEnd (pre-fix they were permanently
-    // ungrabbable in the default state).
-    const AmpEnvelope e;   // struct defaults ARE the tier-0 Gate defaults
     const Rect a = wideArea();
     const std::vector<EnvVertex> poly = buildEnvelopePolyline(e, overlayOf(a), kTotal);
-    CHECK(poly.size() == 6);
+    EnvVertex end;
-    for (const EnvVertex& v : poly) {
+    CHECK(findNode(poly, EnvNode::ReleaseEnd, end));
-        if (v.node == EnvNode::Origin || v.node == EnvNode::ReleaseStart) continue;
+    // The bottom-right corner is fixed: a grab there either misses or resolves to a NEIGHBOUR,
-        const NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, v.x, v.y);
+    // never to ReleaseEnd itself.
-        CHECK(h.hit && h.node == v.node);
+    const NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, end.x, end.y);
-    }
+    CHECK(!h.hit || h.node != EnvNode::ReleaseEnd);
+    EnvVertex origin;
+    CHECK(findNode(poly, EnvNode::Origin, origin));
+    const NodeHit o = nodeAtPoint(e, overlayOf(a), kTotal, origin.x, origin.y);
+    CHECK(!o.hit || o.node != EnvNode::Origin);
 }
 
-// --- resolveNodeDrag Gate -----------------------------------------------------
+static void testAhdHasNoSustainNodes() {
+    const StageEnvelope e = ahdEnv();
+    CHECK(grabAt(e, EnvNode::AttackEnd).hit);
+    CHECK(grabAt(e, EnvNode::HoldEnd).hit);
+    CHECK(grabAt(e, EnvNode::DecayEnd).hit);
+    // ReleaseStart is not drawn on an AHD at all, so there is nothing to grab.
+    CHECK(!grabAt(e, EnvNode::ReleaseStart).hit);
+    // And an explicit resolve of an other-kind node is a no-op rather than a stray write.
+    const StageEnvelope out = resolveNodeDrag(e, EnvNode::ReleaseStart, overlayOf(wideArea()),
+                                              kTotal, bounds(), 40, 0);
+    CHECK(out.releaseSeconds == e.releaseSeconds);
+    CHECK(out.attackSeconds == e.attackSeconds);
+}
 
-static void testGateAttackDragMovesOnlyAttack() {
+static void testMissOutsideTheRadius() {
-    const AmpEnvelope e = gateEnv();
+    const StageEnvelope e = ahdsrEnv();
     const Rect a = wideArea();
-    EnvClampBounds b;  // default maxima 4.0s
+    // Far from every handle in both axes.
-    // +50px at the GATE param-domain scale (~0.0098 s/px) on attack. Nothing else moves.
+    const NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, a.x + 3, a.bottom() - 40);
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(a), kTotal, b, 50, 0);
-    CHECK(near(out.attackSeconds, 0.2 + 50.0 * kGateSecPerPx));
-    CHECK(near(out.holdSeconds, e.holdSeconds));
-    CHECK(near(out.decaySeconds, e.decaySeconds));
-    CHECK(near(out.sustainLevel, e.sustainLevel));
-    CHECK(near(out.releaseSeconds, e.releaseSeconds));
-}
-
-static void testGateTimeLowerClampAtZero() {
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    // Drag attack far LEFT (-500px ~= -4.9s at the gate scale) from 0.2s: clamps to 0, never
-    // negative (monotonic: the segment cannot go below zero).
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(a), kTotal, b, -500, 0);
-    CHECK(near(out.attackSeconds, 0.0));
-}
-
-static void testGateTimeUpperClampAtSliderMax() {
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    b.maxDecaySeconds = 1.0;   // the shell's decay slider tops out at 1.0s
-    // Drag decay far RIGHT (+2000px ~= +19.6s at the gate scale) from 0.3s: clamps to the slider
-    // max 1.0, NOT beyond (the drag can't produce a param the slider couldn't).
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, b, 2000, 0);
-    CHECK(near(out.decaySeconds, 1.0));
-}
-
-static void testGateSustainNodeBothAxes() {
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    // DecayEnd: +100px X at the gate timed scale on decay; +bottom-ward Y LOWERS the level. Level
-    // span is 99 px for [0,1]; drag DOWN by ~10px (positive dy) lowers sustain by ~10/99 ~= 0.101.
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, b, 100, 10);
-    CHECK(near(out.decaySeconds, 0.3 + 100.0 * kGateSecPerPx));
-    CHECK(out.sustainLevel < e.sustainLevel);            // dragged DOWN -> lower sustain
-    CHECK(near(out.sustainLevel, 0.5 - 10.0 / 99.0, 1e-6));
-}
-
-static void testGateSustainLevelClamps01() {
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    // Drag sustain UP hard (dy very negative): clamps to 1.0.
-    AmpEnvelope up = resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, b, 0, -10000);
-    CHECK(near(up.sustainLevel, 1.0));
-    // Drag sustain DOWN hard (dy very positive): clamps to 0.0.
-    AmpEnvelope dn = resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, b, 0, 10000);
-    CHECK(near(dn.sustainLevel, 0.0));
-}
-
-static void testGateTimeOnlyNodeIgnoresY() {
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    // HoldEnd is time-only: a big Y delta must NOT change any level (there is no level to change).
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::HoldEnd, overlayOf(a), kTotal, b, 0, 500);
-    CHECK(near(out.holdSeconds, e.holdSeconds));   // dx 0 -> no time change either
-    CHECK(near(out.sustainLevel, e.sustainLevel)); // Y ignored for a time-only node
-}
-
-static void testGateReleaseEndGrabAndDrag() {
-    // The FA2 fix: ReleaseEnd is a drawn, IN-BOUNDS, grabbable handle (pre-FA2 it mapped past
-    // area.right() and could never be grabbed). gateEnv() draws it at x@284, level 0 (bottom row).
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, a.x + 284, a.bottom() - 1);
-    CHECK(h.hit && h.node == EnvNode::ReleaseEnd);
-    // Dragging it RIGHT lengthens the release at the gate timed scale; only release changes.
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::ReleaseEnd, overlayOf(a), kTotal, b, 85, 0);
-    CHECK(near(out.releaseSeconds, 0.4 + 85.0 * kGateSecPerPx));
-    CHECK(near(out.sustainLevel, e.sustainLevel));
-    CHECK(near(out.decaySeconds, e.decaySeconds));
-    // Far LEFT clamps to 0; far RIGHT clamps to the slider max.
-    AmpEnvelope lo = resolveNodeDrag(e, EnvNode::ReleaseEnd, overlayOf(a), kTotal, b, -2000, 0);
-    CHECK(near(lo.releaseSeconds, 0.0));
-    AmpEnvelope hi = resolveNodeDrag(e, EnvNode::ReleaseEnd, overlayOf(a), kTotal, b, 5000, 0);
-    CHECK(near(hi.releaseSeconds, b.maxReleaseSeconds));
-}
-
-static void testGateDragRoundTripTracksPixels() {
-    // 1:1 tracking (FA2): drag a Gate node by N px, rebuild the polyline from the edited params,
-    // and the node's drawn vertex has moved by ~N px (rounding may shift the landing by 1). The
-    // forward map is affine in each node's own segment duration with slope gatePxPerSecond and
-    // the inverse uses exactly the reciprocal, so the handle follows the cursor.
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    const int dx = 25;
-    for (EnvNode n : {EnvNode::AttackEnd, EnvNode::HoldEnd, EnvNode::DecayEnd,
-                      EnvNode::ReleaseEnd}) {
-        EnvVertex before, after;
-        CHECK(findNode(buildEnvelopePolyline(e, overlayOf(a), kTotal), n, before));
-        const AmpEnvelope edited = resolveNodeDrag(e, n, overlayOf(a), kTotal, b, dx, 0);
-        CHECK(findNode(buildEnvelopePolyline(edited, overlayOf(a), kTotal), n, after));
-        CHECK(std::abs((after.x - before.x) - dx) <= 1);
-    }
-    // The sustain node's Y axis tracks too: +10px down moves the drawn vertex ~10px down.
-    EnvVertex before, after;
-    CHECK(findNode(buildEnvelopePolyline(e, overlayOf(a), kTotal), EnvNode::DecayEnd, before));
-    const AmpEnvelope edited = resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, b, 0, 10);
-    CHECK(findNode(buildEnvelopePolyline(edited, overlayOf(a), kTotal), EnvNode::DecayEnd, after));
-    CHECK(std::abs((after.y - before.y) - 10) <= 1);
-}
-
-// --- resolveNodeDrag Trigger --------------------------------------------------
-
-static void testTriggerFadeInIsFractionOfPlaySpan() {
-    const AmpEnvelope e = triggerEnv();   // played span 1.0s -> 500px
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    // +50px = +0.1s on the play timeline = +0.1/1.0 = +0.1 fraction. fadeIn 0.2 -> 0.3.
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::FadeInEnd, overlayOf(a), kTotal, b, 50, 0);
-    CHECK(near(out.fadeInFraction, 0.3));
-    CHECK(near(out.fadeOutFraction, e.fadeOutFraction));  // unchanged
-}
-
-static void testTriggerFadesCannotCross() {
-    AmpEnvelope e = triggerEnv();
-    e.fadeInFraction  = 0.5;
-    e.fadeOutFraction = 0.3;   // sum 0.8, room 0.2 before they'd cross
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    // Drag fade-in far RIGHT (+2000px): would push fadeIn well past 1-fadeOut=0.7, but the mutual
-    // clamp caps it at 0.7 so the fade nodes never cross (monotonic on the play timeline).
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::FadeInEnd, overlayOf(a), kTotal, b, 2000, 0);
-    CHECK(near(out.fadeInFraction, 0.7));
-    CHECK(near(out.fadeOutFraction, 0.3));
-}
-
-static void testTriggerFadeOutMovesOppositePixelDelta() {
-    const AmpEnvelope e = triggerEnv();   // fadeOut 0.2, play span 1.0s -> 500px
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    // FadeOutStart sits at (1-fadeOut) of the span; dragging it LEFT (-50px) LENGTHENS the fade-out.
-    // -50px = -0.1s = -0.1 fraction on the span, applied OPPOSITE -> fadeOut 0.2 -> 0.3.
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::FadeOutStart, overlayOf(a), kTotal, b, -50, 0);
-    CHECK(near(out.fadeOutFraction, 0.3));
-    CHECK(near(out.fadeInFraction, e.fadeInFraction));
-}
-
-static void testTriggerZeroFadeOutGrabbableAtRightEdge() {
-    // The FA2 fix: at fade-out == 0 and full length, FadeOutStart draws AT the right edge
-    // (right-1, level 1). It must be grabbable there and draggable INWARD to grow the fade from
-    // zero (drag LEFT -> longer fade-out, opposite the pixel delta).
-    AmpEnvelope e;
-    e.mode = EnvMode::Trigger;
-    e.lengthFraction  = 1.0;   // played span = full 2.0s -> 1000px
-    e.fadeInFraction  = 0.1;
-    e.fadeOutFraction = 0.0;
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    NodeHit h = nodeAtPoint(e, overlayOf(a), kTotal, a.right() - 1, a.y);
-    CHECK(h.hit && h.node == EnvNode::FadeOutStart);
-    // -100px = -0.2s on the 2.0s played span, applied OPPOSITE -> fadeOut 0.0 -> 0.1.
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::FadeOutStart, overlayOf(a), kTotal, b, -100, 0);
-    CHECK(near(out.fadeOutFraction, 0.1));
-    CHECK(near(out.lengthFraction, e.lengthFraction));   // length untouched
-    // LengthEnd sits at the same x but level 0 (bottom row) — grabbable at ITS drawn point.
-    NodeHit le = nodeAtPoint(e, overlayOf(a), kTotal, a.right() - 1, a.bottom() - 1);
-    CHECK(le.hit && le.node == EnvNode::LengthEnd);
-}
-
-static void testTriggerLengthClampsAtMax() {
-    const AmpEnvelope e = triggerEnv();   // length 0.5
-    const Rect a = wideArea();
-    EnvClampBounds b;                     // maxLengthFraction 1.0
-    // LengthEnd maps to a fraction of the WHOLE sample: +2000px = +4.0s = +2.0 fraction, clamps 1.0.
-    AmpEnvelope out = resolveNodeDrag(e, EnvNode::LengthEnd, overlayOf(a), kTotal, b, 2000, 0);
-    CHECK(near(out.lengthFraction, 1.0));
-    // Drag far LEFT clamps to 0.
-    AmpEnvelope lo = resolveNodeDrag(e, EnvNode::LengthEnd, overlayOf(a), kTotal, b, -2000, 0);
-    CHECK(near(lo.lengthFraction, 0.0));
-}
-
-// --- No-motion guards ---------------------------------------------------------
-
-static void testNonDraggableNodeNoMotion() {
-    const AmpEnvelope e = gateEnv();
-    const Rect a = wideArea();
-    EnvClampBounds b;
-    AmpEnvelope o = resolveNodeDrag(e, EnvNode::Origin, overlayOf(a), kTotal, b, 500, 500);
-    CHECK(near(o.attackSeconds, e.attackSeconds) && near(o.sustainLevel, e.sustainLevel));
-    AmpEnvelope rs = resolveNodeDrag(e, EnvNode::ReleaseStart, overlayOf(a), kTotal, b, 500, 500);
-    CHECK(near(rs.releaseSeconds, e.releaseSeconds));
-}
-
-static void testDegenerateAreaNoMotion() {
-    const AmpEnvelope e = gateEnv();
-    EnvClampBounds b;
-    const Rect zeroW = Rect::ltrb(0, 0, 0, 100);
-    AmpEnvelope o1 = resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(zeroW), kTotal, b, 500, 0);
-    CHECK(near(o1.attackSeconds, e.attackSeconds));
-    AmpEnvelope o2 = resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(wideArea()), 0.0, b, 500, 0);  // no time
-    CHECK(near(o2.attackSeconds, e.attackSeconds));
-}
-
-static void testCrossModeNodeNoMotion() {
-    // A node from the OTHER mode never writes (FA2 guard): the degenerate baseline polyline
-    // carries a ReleaseEnd vertex regardless of mode, so a Trigger-mode grab of it (e.g. over a
-    // zero-height canvas) must NOT write releaseSeconds — and symmetrically a Trigger node is
-    // inert on a Gate envelope.
-    EnvClampBounds b;
-    const AmpEnvelope t = triggerEnv();
-    AmpEnvelope out = resolveNodeDrag(t, EnvNode::ReleaseEnd, overlayOf(wideArea()), kTotal, b, 50, 0);
-    CHECK(near(out.releaseSeconds, t.releaseSeconds));
-    const AmpEnvelope g = gateEnv();
-    out = resolveNodeDrag(g, EnvNode::FadeInEnd, overlayOf(wideArea()), kTotal, b, 50, 0);
-    CHECK(near(out.fadeInFraction, g.fadeInFraction));
-    // And the zero-height baseline's ReleaseEnd is not even reported grabbable in Trigger mode.
-    const Rect flat = Rect::ltrb(0, 0, 100, 0);
-    const NodeHit h = nodeAtPoint(t, overlayOf(flat), kTotal, 99, 0);
     CHECK(!h.hit);
 }
 
+// --- AHDSR drags ---------------------------------------------------------------
+
+static void testAhdsrStageTimesTrackTheSchematicScale() {
+    const Rect a = wideArea();
+    const StageEnvelope e = ahdsrEnv();
+    const double secPerPx = 1.0 / gatePxPerSecond(a);
+
+    const StageEnvelope attack =
+        resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(a), kTotal, bounds(), 50, 0);
+    CHECK(std::fabs(attack.attackSeconds - (e.attackSeconds + 50 * secPerPx)) < 1e-9);
+    CHECK(attack.holdSeconds == e.holdSeconds);  // only the dragged param moves
+
+    const StageEnvelope hold =
+        resolveNodeDrag(e, EnvNode::HoldEnd, overlayOf(a), kTotal, bounds(), -20, 0);
+    CHECK(std::fabs(hold.holdSeconds - (e.holdSeconds - 20 * secPerPx)) < 1e-9);
+
+    const StageEnvelope decay =
+        resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, bounds(), 30, 0);
+    CHECK(std::fabs(decay.decaySeconds - (e.decaySeconds + 30 * secPerPx)) < 1e-9);
+}
+
+// The release is dragged from its TOP node and its end is anchored to the canvas edge, so
+// pulling that node LEFT lengthens the release — the sign is inverted relative to every other
+// stage.
+static void testReleaseDragsFromItsStartWithInvertedSign() {
+    const Rect a = wideArea();
+    const StageEnvelope e = ahdsrEnv();
+    const double secPerPx = 1.0 / gatePxPerSecond(a);
+    const StageEnvelope longer =
+        resolveNodeDrag(e, EnvNode::ReleaseStart, overlayOf(a), kTotal, bounds(), -40, 0);
+    CHECK(std::fabs(longer.releaseSeconds - (e.releaseSeconds + 40 * secPerPx)) < 1e-9);
+    const StageEnvelope shorter =
+        resolveNodeDrag(e, EnvNode::ReleaseStart, overlayOf(a), kTotal, bounds(), 40, 0);
+    CHECK(shorter.releaseSeconds < e.releaseSeconds);
+}
+
+static void testSustainLevelOnTheDecayNodesYAxis() {
+    const Rect a = wideArea();
+    const StageEnvelope e = ahdsrEnv();
+    const double lvlPerPx = 1.0 / (a.height - 1);
+    const StageEnvelope up =
+        resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, bounds(), 0, -10);
+    CHECK(std::fabs(up.sustainLevel - (e.sustainLevel + 10 * lvlPerPx)) < 1e-9);
+    // Clamped to [0,1] at both ends.
+    CHECK(resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, bounds(), 0, -10000)
+              .sustainLevel == 1.0);
+    CHECK(resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, bounds(), 0, 10000)
+              .sustainLevel == 0.0);
+}
+
+static void testStageTimesClampToTheKnobDomain() {
+    const Rect a = wideArea();
+    const StageEnvelope e = ahdsrEnv();
+    CHECK(resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(a), kTotal, bounds(), 100000, 0)
+              .attackSeconds == bounds().maxAttackSeconds);
+    CHECK(resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(a), kTotal, bounds(), -100000, 0)
+              .attackSeconds == 0.0);
+}
+
+// --- AHD drags -----------------------------------------------------------------
+
+static void testAhdStageTimesTrackTheWallClockScale() {
+    const Rect a = wideArea();
+    const StageEnvelope e = ahdEnv();
+    const double secPerPx = kTotal / a.width;
+    const StageEnvelope attack =
+        resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(a), kTotal, bounds(), 100, 0);
+    CHECK(std::fabs(attack.attackSeconds - (e.attackSeconds + 100 * secPerPx)) < 1e-9);
+    const StageEnvelope decay =
+        resolveNodeDrag(e, EnvNode::DecayEnd, overlayOf(a), kTotal, bounds(), 100, 0);
+    CHECK(std::fabs(decay.decaySeconds - (e.decaySeconds + 100 * secPerPx)) < 1e-9);
+}
+
+// Hold is a fraction of what attack and decay left, so the node's pixel motion converts through
+// that remainder — and the fraction can never leave [0,1], which is what keeps the sum bounded.
+static void testAhdHoldNodeEditsTheFraction() {
+    const Rect a = wideArea();
+    const StageEnvelope e = ahdEnv();
+    const double secPerPx = kTotal / a.width;
+    const AhdSplit s = splitAhdSeconds(e);
+    const double rem = e.spanSeconds - s.attack - s.decay;
+    const StageEnvelope moved =
+        resolveNodeDrag(e, EnvNode::HoldEnd, overlayOf(a), kTotal, bounds(), 100, 0);
+    CHECK(std::fabs(moved.holdFraction - ((s.hold + 100 * secPerPx) / rem)) < 1e-9);
+    CHECK(resolveNodeDrag(e, EnvNode::HoldEnd, overlayOf(a), kTotal, bounds(), 100000, 0)
+              .holdFraction == 1.0);
+    CHECK(resolveNodeDrag(e, EnvNode::HoldEnd, overlayOf(a), kTotal, bounds(), -100000, 0)
+              .holdFraction == 0.0);
+}
+
+// --- curve knots ---------------------------------------------------------------
+
+static void testKnotDragMovesTheExponentWithinItsDomain() {
+    const Rect a = wideArea();
+    StageEnvelope e = ahdsrEnv();
+    e.attackCurve = util::kCurveNeutral;
+    const StageEnvelope up =
+        resolveNodeDrag(e, EnvNode::AttackCurve, overlayOf(a), kTotal, bounds(), 0, -12);
+    const StageEnvelope down =
+        resolveNodeDrag(e, EnvNode::AttackCurve, overlayOf(a), kTotal, bounds(), 0, 12);
+    // Dragging the attack knot UP (toward the ceiling) is a faster-rising, SMALLER exponent.
+    CHECK(up.attackCurve < util::kCurveNeutral);
+    CHECK(down.attackCurve > util::kCurveNeutral);
+    CHECK(up.attackCurve >= util::kCurveMin && up.attackCurve <= util::kCurveMax);
+    CHECK(down.attackCurve >= util::kCurveMin && down.attackCurve <= util::kCurveMax);
+    // Extreme drags saturate at the domain endpoints rather than escaping them.
+    CHECK(resolveNodeDrag(e, EnvNode::AttackCurve, overlayOf(a), kTotal, bounds(), 0, -100000)
+              .attackCurve == util::kCurveMin);
+    CHECK(resolveNodeDrag(e, EnvNode::AttackCurve, overlayOf(a), kTotal, bounds(), 0, 100000)
+              .attackCurve == util::kCurveMax);
+    // Only the dragged segment's exponent moves.
+    CHECK(up.decayCurve == e.decayCurve && up.releaseCurve == e.releaseCurve);
+    CHECK(up.attackSeconds == e.attackSeconds);
+}
+
+// The one-model rule, asserted structurally: the drawn knot's height IS the shared law's
+// reading of the stored exponent, and a zero-delta drag from that grab reproduces the exponent
+// exactly — so the overlay and the inner dial cannot express different values for one field.
+static void testKnotAndModelCannotDiverge() {
+    const Rect a = wideArea();
+    for (double exp : {0.2, 0.5, 1.0, 2.0, 7.0}) {
+        StageEnvelope e = ahdsrEnv();
+        e.attackCurve = exp;
+        EnvVertex knot;
+        CHECK(findNode(buildEnvelopePolyline(e, overlayOf(a), kTotal), EnvNode::AttackCurve,
+                       knot));
+        CHECK(std::fabs(knot.level - util::curveMidLevel(exp)) < 1e-12);
+        const StageEnvelope same =
+            resolveNodeDrag(e, EnvNode::AttackCurve, overlayOf(a), kTotal, bounds(), 0, 0);
+        CHECK(std::fabs(same.attackCurve - exp) < 1e-9);
+    }
+}
+
+// A decay into a sustain of exactly 1.0 is a LEVEL segment: there is no curve to express, so
+// the drag must leave the exponent alone rather than divide by a zero level span.
+static void testKnotOnALevelSegmentIsANoOp() {
+    const Rect a = wideArea();
+    StageEnvelope e = ahdsrEnv();
+    e.sustainLevel = 1.0;
+    e.decayCurve = 2.5;
+    const StageEnvelope out =
+        resolveNodeDrag(e, EnvNode::DecayCurve, overlayOf(a), kTotal, bounds(), 0, -30);
+    CHECK(out.decayCurve == 2.5);
+}
+
+// --- degenerate ----------------------------------------------------------------
+
+static void testDegenerateInputsAreNoOps() {
+    const StageEnvelope e = ahdsrEnv();
+    const StageEnvelope zeroArea =
+        resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(Rect{}), kTotal, bounds(), 50, 0);
+    CHECK(zeroArea.attackSeconds == e.attackSeconds);
+    const StageEnvelope zeroDur =
+        resolveNodeDrag(e, EnvNode::AttackEnd, overlayOf(wideArea()), 0.0, bounds(), 50, 0);
+    CHECK(zeroDur.attackSeconds == e.attackSeconds);
+}
+
 int main() {
-    testHitGrabsDrawnHandle();
+    testEveryDrawnHandleIsGrabbable();
-    testHitMissesOffEveryNode();
+    testAnchoredEndAndOriginAreNotGrabbable();
-    testHitSkipsNonDraggableAnchors();
+    testAhdHasNoSustainNodes();
-    testHitNearestNodeWinsOverDrawOrder();
+    testMissOutsideTheRadius();
-    testGateDefaultsEveryNodeGrabbable();
 
-    testGateAttackDragMovesOnlyAttack();
+    testAhdsrStageTimesTrackTheSchematicScale();
-    testGateTimeLowerClampAtZero();
+    testReleaseDragsFromItsStartWithInvertedSign();
-    testGateTimeUpperClampAtSliderMax();
+    testSustainLevelOnTheDecayNodesYAxis();
-    testGateSustainNodeBothAxes();
+    testStageTimesClampToTheKnobDomain();
-    testGateSustainLevelClamps01();
-    testGateTimeOnlyNodeIgnoresY();
-    testGateReleaseEndGrabAndDrag();
-    testGateDragRoundTripTracksPixels();
 
-    testTriggerFadeInIsFractionOfPlaySpan();
+    testAhdStageTimesTrackTheWallClockScale();
-    testTriggerFadesCannotCross();
+    testAhdHoldNodeEditsTheFraction();
-    testTriggerFadeOutMovesOppositePixelDelta();
-    testTriggerZeroFadeOutGrabbableAtRightEdge();
-    testTriggerLengthClampsAtMax();
 
-    testNonDraggableNodeNoMotion();
+    testKnotDragMovesTheExponentWithinItsDomain();
-    testDegenerateAreaNoMotion();
+    testKnotAndModelCannotDiverge();
-    testCrossModeNodeNoMotion();
+    testKnotOnALevelSegmentIsANoOp();
+
+    testDegenerateInputsAreNoOps();
 
     if (g_fail == 0) std::printf("envelope_edit: all tests passed\n");
     else std::printf("envelope_edit: %d FAILED\n", g_fail);

tests/test_envelope_overlay.cpp

@@ -1,21 +1,19 @@
-// Standalone tests for reasampler::instrument::ui::envelope_overlay — no VST3, no REAPER, no framework.
+// Standalone tests for reasampler::instrument::ui::envelope_overlay — no VST3, no REAPER, no
-// Same fast assert loop as the sibling pure tests. Assert the S-VIEW-3/FA2 amp-envelope ->
+// framework. Same fast assert loop as the sibling pure tests. Assert the staged-envelope ->
-// polyline FORWARD map: the Gate BOUNDED-SCHEMATIC AHDSR shape (attack ramp / hold plateau /
+// polyline FORWARD map for BOTH layout policies: the AHDSR bounded schematic with its
-// decay-to-sustain / fixed-width sustain plateau / in-bounds release) and the Trigger
+// RIGHT-ANCHORED release, and the sustain-less AHD laid 1:1 over the waveform's time axis.
-// fade/%-length shape at the waveform time base.
 //
-// Covers: timeToX / levelToY (linear maps, edge clamps, past-end CLAMPED to right-1 — the FA2
+// Covers: timeToX / levelToY (linear maps, edge clamps, past-end clamped to right-1, no 32-bit
-// bounds invariant, no 32-bit overflow on huge times, degenerate area/duration); gateTimedWidth
+// overflow on huge times, degenerate area/duration); gatePxPerSecond; the AHDSR polyline (node
-// + gatePxPerSecond; buildEnvelopePolyline Gate (node order, levels, PARAM-DOMAIN timed-region
+// order, levels, release anchored at the right edge, the sustain plateau reaching the edge at
-// placement independent of sample duration, per-segment kGateNodeSepPx separation — every node
+// zero release, per-segment separation at the tier-0 defaults, overrun compression, every
-// distinct even at the tier-0 zero-hold/zero-decay defaults, fixed sustain-plateau reserve,
+// vertex in-bounds); splitAhdSeconds (A+H+D never exceeds the span, hold at 0% and 100%); the
-// release visible in-bounds, overrun compressed from the right preserving the minimum gaps,
+// AHD polyline (1:1 with the time axis, origin offset); curve knots (present only on sloped
-// every vertex in-bounds); buildEnvelopePolyline Trigger (fade-in/unity/fade-out at fractions of
+// non-zero segments, height following the exponent); the degenerate flat baseline.
-// the played span, overlap clamp, full-length/zero-fade-out nodes in-bounds at right-1);
-// degenerate flat baseline.
 
 #include "../src/core/instrument/ui/envelope_overlay.h"
 
+#include <cmath>
 #include <cstdio>
 #include <vector>
 
@@ -32,13 +30,38 @@ static OverlayArea overlayOf(const Rect& r) { return OverlayArea{r}; }
 // bugs). Under levelToY the level span is height-1 = 99 rows.
 static Rect wideArea() { return Rect::ltrb(20, 10, 1020, 110); }  // width 1000, height 100
 
-// Find the first vertex with a given node in a polyline; asserts presence via the returned bool.
 static bool findNode(const std::vector<EnvVertex>& poly, EnvNode node, EnvVertex& out) {
     for (const EnvVertex& v : poly) {
         if (v.node == node) { out = v; return true; }
     }
     return false;
 }
+static bool hasNode(const std::vector<EnvVertex>& poly, EnvNode node) {
+    EnvVertex v;
+    return findNode(poly, node, v);
+}
+
+static StageEnvelope ahdsr(double a, double h, double d, double sus, double r) {
+    StageEnvelope e;
+    e.kind = EnvKind::Ahdsr;
+    e.attackSeconds = a;
+    e.holdSeconds = h;
+    e.decaySeconds = d;
+    e.sustainLevel = sus;
+    e.releaseSeconds = r;
+    return e;
+}
+
+static StageEnvelope ahd(double a, double d, double frac, double origin, double span) {
+    StageEnvelope e;
+    e.kind = EnvKind::Ahd;
+    e.attackSeconds = a;
+    e.decaySeconds = d;
+    e.holdFraction = frac;
+    e.originSeconds = origin;
+    e.spanSeconds = span;
+    return e;
+}
 
 // --- timeToX / levelToY -------------------------------------------------------
 
@@ -49,347 +72,271 @@ static void testTimeToXEndpoints() {
     CHECK(timeToX(a, 2.0, 1.0) == a.x + 500);      // midpoint
 }
 
-static void testTimeToXNegativePinsLeft() {
+static void testTimeToXClampsBothEnds() {
-    const Rect a = wideArea();
-    CHECK(timeToX(a, 2.0, -0.5) == a.x);          // t<0 pins left
-}
-
-static void testTimeToXPastEndClamps() {
-    // FA2 bounds invariant: t past total pins to the last in-bounds column, never past right.
     const Rect a = wideArea();
+    CHECK(timeToX(a, 2.0, -0.5) == a.x);
     CHECK(timeToX(a, 2.0, 3.0) == a.right() - 1);
-    CHECK(timeToX(a, 2.0, 1000.0) == a.right() - 1);
     // A HUGE t must clamp in double space, not overflow the integer cast (32-bit long on
     // Windows would wrap to LONG_MIN and pin to the WRONG edge).
     CHECK(timeToX(a, 2.0, 1e15) == a.right() - 1);
 }
 
-static void testGateTimedWidth() {
+static void testLevelToY() {
-    // 15% of the 1000px canvas is reserved for the sustain plateau -> 850px timed region.
-    CHECK(gateTimedWidth(wideArea()) == 850);
-    // Zero-width area -> 0; a tiny area still yields >= 1 so the px<->s scale never degenerates.
-    CHECK(gateTimedWidth(Rect::ltrb(5, 5, 5, 45)) == 0);
-    CHECK(gateTimedWidth(Rect::ltrb(0, 0, 1, 10)) == 1);
-}
-
-static void testGatePxPerSecond() {
-    // PARAM-DOMAIN scale: (timedW - 1 - 4*sep) px spread over 4 x kGateStageMaxSeconds. For the
-    // 1000px canvas: (850 - 1 - 32) / 8.0s = 817/8 px/s. Independent of any sample duration.
-    const double expected = 817.0 / (4.0 * kGateStageMaxSeconds);
-    CHECK(gatePxPerSecond(wideArea()) == expected);
-    CHECK(gatePxPerSecond(Rect::ltrb(5, 5, 5, 45)) == 0.0);   // zero-width area -> 0
-    CHECK(gatePxPerSecond(Rect::ltrb(0, 0, 10, 10)) > 0.0);   // tiny area: usable floors at 1px, > 0
-}
-
-static void testTimeToXDegenerate() {
-    const Rect a = wideArea();
-    CHECK(timeToX(a, 0.0, 1.0) == a.x);           // no duration -> left
-    const Rect z = Rect::ltrb(5, 5, 5, 45);                // zero width
-    CHECK(timeToX(z, 2.0, 1.0) == z.x);
-}
-
-static void testLevelToYEndpoints() {
     const Rect a = wideArea();
     CHECK(levelToY(a, 1.0) == a.y);                 // level 1 -> top row
     CHECK(levelToY(a, 0.0) == a.bottom() - 1);      // level 0 -> bottom row
-    CHECK(levelToY(a, 0.5) == a.y + 50);           // mid: round((1-0.5)*99)=round(49.5)=50
+    CHECK(levelToY(a, 0.5) == a.y + 50);            // 99-row span, rounded
+    CHECK(levelToY(a, 5.0) == a.y);                 // clamps
+    CHECK(levelToY(a, -5.0) == a.bottom() - 1);
 }
 
-static void testLevelToYClamps() {
+static void testDegenerateAreaAndDuration() {
-    const Rect a = wideArea();
+    CHECK(timeToX(Rect{}, 2.0, 1.0) == 0);
-    CHECK(levelToY(a, 2.0) == a.y);                // >1 clamps to top
+    CHECK(timeToX(wideArea(), 0.0, 1.0) == wideArea().x);
-    CHECK(levelToY(a, -1.0) == a.bottom() - 1);        // <0 clamps to bottom
+    CHECK(levelToY(Rect{}, 0.5) == 0);
-    const Rect z = Rect::ltrb(5, 5, 45, 5);                // zero height
+    CHECK(gatePxPerSecond(Rect{}) == 0.0);
-    CHECK(levelToY(z, 0.5) == z.y);
 }
 
-// --- Gate polyline ------------------------------------------------------------
+// --- the AHDSR schematic ------------------------------------------------------
 
-static void testGateNodeOrderAndLevels() {
+static void testAhdsrNodeOrderAndLevels() {
-    AmpEnvelope env;
-    env.mode = EnvMode::Gate;
-    env.attackSeconds  = 0.2;
-    env.holdSeconds    = 0.1;
-    env.decaySeconds   = 0.3;
-    env.sustainLevel   = 0.5;
-    env.releaseSeconds = 0.4;
     const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
+    const std::vector<EnvVertex> poly =
-
+        buildEnvelopePolyline(ahdsr(0.2, 0.1, 0.3, 0.5, 0.4), overlayOf(a), 4.0);
-    // Six vertices, in draw order.
-    CHECK(poly.size() == 6);
-    CHECK(poly[0].node == EnvNode::Origin);
-    CHECK(poly[1].node == EnvNode::AttackEnd);
-    CHECK(poly[2].node == EnvNode::HoldEnd);
-    CHECK(poly[3].node == EnvNode::DecayEnd);
-    CHECK(poly[4].node == EnvNode::ReleaseStart);
-    CHECK(poly[5].node == EnvNode::ReleaseEnd);
-
-    // Levels: origin 0, attack/hold peak 1, decay settles to sustain, plateau holds sustain,
-    // release ends at 0.
-    CHECK(poly[0].level == 0.0);
-    CHECK(poly[1].level == 1.0);
-    CHECK(poly[2].level == 1.0);
-    CHECK(poly[3].level == 0.5);   // sustain
-    CHECK(poly[4].level == 0.5);   // plateau end holds sustain
-    CHECK(poly[5].level == 0.0);
-}
-
-static void testGateSchematicPlacement() {
-    // FA2 bounded schematic at the PARAM-DOMAIN scale: timed region = 850px (150px reserved
-    // plateau), pps = (850-1-32)/8s = 102.125 px/s, each segment prefixed by the 8px separation
-    // base. attack .2 -> x@round(8+20.425)=28; hold .1 -> x@round(28.425+8+10.2125)=47; decay
-    // .3 -> x@round(46.6375+8+30.6375)=85; plateau is the FIXED 150px reserve -> ReleaseStart
-    // x@235; release .4 -> x@round(235.275+8+40.85)=284, well inside the canvas.
-    AmpEnvelope env;
-    env.mode = EnvMode::Gate;
-    env.attackSeconds  = 0.2;
-    env.holdSeconds    = 0.1;
-    env.decaySeconds   = 0.3;
-    env.sustainLevel   = 0.5;
-    env.releaseSeconds = 0.4;
-    const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
-
     EnvVertex v;
-    CHECK(findNode(poly, EnvNode::AttackEnd, v)    && v.x == a.x + 28);
+    CHECK(poly.size() >= 6);
-    CHECK(findNode(poly, EnvNode::HoldEnd, v)      && v.x == a.x + 47);
+    CHECK(poly[0].node == EnvNode::Origin && poly[0].level == 0.0);
-    CHECK(findNode(poly, EnvNode::DecayEnd, v)     && v.x == a.x + 85);
+    CHECK(poly[1].node == EnvNode::AttackEnd && poly[1].level == 1.0);
-    CHECK(findNode(poly, EnvNode::ReleaseStart, v) && v.x == a.x + 235);
+    CHECK(poly[2].node == EnvNode::HoldEnd && poly[2].level == 1.0);
-    CHECK(findNode(poly, EnvNode::ReleaseEnd, v)   && v.x == a.x + 284);
+    CHECK(poly[3].node == EnvNode::DecayEnd && poly[3].level == 0.5);
-}
+    CHECK(poly[4].node == EnvNode::ReleaseStart && poly[4].level == 0.5);
-
+    CHECK(poly[5].node == EnvNode::ReleaseEnd && poly[5].level == 0.0);
-static void testGateLayoutIndependentOfSampleDuration() {
+    // Monotone in x across the traced line.
-    // The Gate schematic is scaled by the PARAM domain, NOT the capture length: the same params
+    for (std::size_t i = 1; i < 6; ++i) CHECK(poly[i].x >= poly[i - 1].x);
-    // produce the SAME polyline over a 0.3s and a 10s sample (pre-fix, a 60ms release on a 10s
+    // Every vertex in-bounds.
-    // capture collapsed to ~5px while 2s stages on a 0.3s capture pinned to the right edge).
+    for (const EnvVertex& p : poly) {
-    AmpEnvelope env;
+        CHECK(p.x >= a.x && p.x <= a.right() - 1);
-    env.mode = EnvMode::Gate;
+        CHECK(p.y >= a.y && p.y <= a.bottom() - 1);
-    env.attackSeconds  = 0.2;
-    env.holdSeconds    = 0.1;
-    env.decaySeconds   = 0.3;
-    env.sustainLevel   = 0.5;
-    env.releaseSeconds = 0.06;
-    const Rect a = wideArea();
-    CHECK(buildEnvelopePolyline(env, overlayOf(a), 0.3) == buildEnvelopePolyline(env, overlayOf(a), 10.0));
-}
-
-static void testGateMinSeparationAtDefaults() {
-    // THE FA2 headline: at the tier-0 Gate defaults (attack 3ms, hold 0, decay 0, sustain 1.0,
-    // release 60ms) every consecutive node pair is at least kGateNodeSepPx apart — no node ever
-    // renders on top of its neighbour, so each is individually grabbable.
-    const AmpEnvelope env;   // struct defaults ARE the tier-0 Gate defaults
-    const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
-    CHECK(poly.size() == 6);
-    for (size_t i = 1; i < poly.size(); ++i) {
-        CHECK(poly[i].x - poly[i - 1].x >= kGateNodeSepPx);
     }
+    CHECK(findNode(poly, EnvNode::ReleaseEnd, v));
+    CHECK(v.x == a.right() - 1);  // ANCHORED, whatever the release is
 }
 
-static void testGateSustainPlateauFixedWidth() {
+// The layout failure this policy exists to fix: at zero release the sustain plateau must run to
-    // The sustain plateau is ALWAYS the reserved width (canvas - timed region), independent of
+// (near) the right edge instead of the figure bunching left.
-    // the AHDSR times — the bounded region that replaces the old plateau-to-sample-end.
+static void testZeroReleasePutsTheSustainPlateauAtTheRightEdge() {
-    AmpEnvelope env;
-    env.mode = EnvMode::Gate;
-    env.attackSeconds  = 0.1;
-    env.holdSeconds    = 0.0;
-    env.decaySeconds   = 0.2;
-    env.sustainLevel   = 0.6;
-    env.releaseSeconds = 0.3;
     const Rect a = wideArea();
-    const int plateauPx = a.width - gateTimedWidth(a);   // 150
+    const std::vector<EnvVertex> poly =
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
+        buildEnvelopePolyline(ahdsr(0.05, 0.0, 0.05, 0.7, 0.0), overlayOf(a), 4.0);
-
+    EnvVertex plateau, end;
-    EnvVertex decay, plateauEnd;
+    CHECK(findNode(poly, EnvNode::ReleaseStart, plateau));
+    CHECK(findNode(poly, EnvNode::ReleaseEnd, end));
+    CHECK(end.x == a.right() - 1);
+    // One node separation short of the edge — the plateau spans essentially the whole canvas.
+    CHECK(plateau.x == a.right() - 1 - kGateNodeSepPx);
+    EnvVertex decay;
     CHECK(findNode(poly, EnvNode::DecayEnd, decay));
-    CHECK(findNode(poly, EnvNode::ReleaseStart, plateauEnd));
+    CHECK(plateau.x - decay.x > a.width / 2);
-    CHECK(plateauEnd.x - decay.x == plateauPx);
-    CHECK(plateauEnd.level == 0.6);               // plateau holds the sustain level
 }
 
-static void testGateReleaseVisibleInBounds() {
+// The release END never moves; the release START is what a longer release pushes left.
-    // The FA2 fix: Release is a VISIBLE, in-bounds segment — ReleaseEnd sits strictly right of
+static void testReleaseGrowsLeftwardFromTheAnchor() {
-    // the plateau end and strictly inside the canvas (pre-FA2 it mapped past area.right() and the
-    // shell clipped its handle away).
-    AmpEnvelope env;
-    env.mode = EnvMode::Gate;
-    env.attackSeconds  = 0.2;
-    env.holdSeconds    = 0.1;
-    env.decaySeconds   = 0.3;
-    env.sustainLevel   = 0.5;
-    env.releaseSeconds = 0.4;
     const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
+    EnvVertex shortStart, longStart, shortEnd, longEnd;
-
+    const std::vector<EnvVertex> shortR =
-    EnvVertex plateauEnd, rel;
+        buildEnvelopePolyline(ahdsr(0.1, 0.0, 0.1, 0.5, 0.1), overlayOf(a), 4.0);
-    CHECK(findNode(poly, EnvNode::ReleaseStart, plateauEnd));
+    const std::vector<EnvVertex> longR =
-    CHECK(findNode(poly, EnvNode::ReleaseEnd, rel));
+        buildEnvelopePolyline(ahdsr(0.1, 0.0, 0.1, 0.5, 1.5), overlayOf(a), 4.0);
-    CHECK(rel.x > plateauEnd.x);                 // a visible ramp, not a collapsed point
+    CHECK(findNode(shortR, EnvNode::ReleaseStart, shortStart));
-    CHECK(rel.x < a.right());                       // strictly in-bounds
+    CHECK(findNode(longR, EnvNode::ReleaseStart, longStart));
-    CHECK(rel.level == 0.0);
+    CHECK(findNode(shortR, EnvNode::ReleaseEnd, shortEnd));
+    CHECK(findNode(longR, EnvNode::ReleaseEnd, longEnd));
+    CHECK(longStart.x < shortStart.x);
+    CHECK(shortEnd.x == longEnd.x);
 }
 
-static void testGateOverrunCompressesFromRight() {
+// Tier-0 defaults are zero hold and zero decay; every node still has to be independently
-    // Stages BEYOND the schematic domain (4.0s each > kGateStageMaxSeconds): the layout
+// grabbable, which is what the per-segment separation base buys.
-    // compresses from the right preserving the minimum gaps — ReleaseEnd pins to the last
+static void testTierZeroDefaultsKeepEveryNodeDistinct() {
-    // in-bounds column, but the trailing nodes stay strictly increasing and individually
-    // separated (>= kGateNodeSepPx), NOT piled on one pixel. NOTHING maps past area.right().
-    AmpEnvelope env;
-    env.mode = EnvMode::Gate;
-    env.attackSeconds  = 4.0;
-    env.holdSeconds    = 4.0;
-    env.decaySeconds   = 4.0;
-    env.sustainLevel   = 0.7;
-    env.releaseSeconds = 4.0;
     const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
+    const std::vector<EnvVertex> poly =
-    CHECK(poly.size() == 6);
+        buildEnvelopePolyline(ahdsr(0.003, 0.0, 0.0, 1.0, 0.060), overlayOf(a), 4.0);
-
+    for (std::size_t i = 1; i < 6; ++i) {
-    EnvVertex plateauEnd, rel;
+        CHECK(poly[i].x - poly[i - 1].x >= kGateNodeSepPx - 1);
-    CHECK(findNode(poly, EnvNode::ReleaseStart, plateauEnd));
-    CHECK(findNode(poly, EnvNode::ReleaseEnd, rel));
-    CHECK(rel.x == a.right() - 1);                  // pinned to the last in-bounds column
-    CHECK(plateauEnd.level == 0.7);               // still at sustain
-    for (size_t i = 1; i < poly.size(); ++i) {
-        CHECK(poly[i].x > poly[i - 1].x);                       // strictly monotonic
-        CHECK(poly[i].x - poly[i - 1].x >= kGateNodeSepPx - 1); // min gaps survive compression
-        CHECK(poly[i].x >= a.x && poly[i].x < a.right());      // in-bounds
     }
 }
 
-static void testGateAllVerticesInBounds() {
+// Every stage maxed: the schematic exactly fills the canvas, the plateau collapses to its
-    // The FA2 bounds invariant, swept over representative param sets (including extremes): every
+// minimum gap, and nothing escapes the rect.
-    // vertex of every polyline stays inside the canvas rect.
+static void testMaxedStagesCompressWithoutOverrunning() {
     const Rect a = wideArea();
-    const AmpEnvelope base;   // defaults
+    const double m = kGateStageMaxSeconds;
-    AmpEnvelope big = base;
+    const std::vector<EnvVertex> poly =
-    big.mode = EnvMode::Gate;
+        buildEnvelopePolyline(ahdsr(m, m, m, 0.5, m), overlayOf(a), 4.0);
-    big.attackSeconds = 4.0; big.holdSeconds = 4.0; big.decaySeconds = 4.0;
+    for (std::size_t i = 1; i < 6; ++i) {
-    big.sustainLevel = 1.0;  big.releaseSeconds = 4.0;
+        CHECK(poly[i].x >= poly[i - 1].x);
-    AmpEnvelope zero = base;
+        CHECK(poly[i].x <= a.right() - 1);
-    zero.mode = EnvMode::Gate;
+    }
-    zero.attackSeconds = 0.0; zero.holdSeconds = 0.0; zero.decaySeconds = 0.0;
+    EnvVertex end;
-    zero.sustainLevel = 0.0;  zero.releaseSeconds = 0.0;
+    CHECK(findNode(poly, EnvNode::ReleaseEnd, end));
-    AmpEnvelope trig = base;
+    CHECK(end.x == a.right() - 1);
-    trig.mode = EnvMode::Trigger;
+}
-    trig.lengthFraction = 1.0; trig.fadeInFraction = 0.0; trig.fadeOutFraction = 0.0;
-    // ABSURD stage values must clamp in double space, not overflow the integer cast (32-bit
-    // long on Windows would wrap negative and land on the WRONG edge).
-    AmpEnvelope huge = base;
-    huge.mode = EnvMode::Gate;
-    huge.releaseSeconds = 1e12;
 
-    for (const AmpEnvelope& env : {base, big, zero, trig, huge}) {
+// --- the AHD split ------------------------------------------------------------
-        for (const EnvVertex& v : buildEnvelopePolyline(env, overlayOf(a), 2.0)) {
+
-            CHECK(v.x >= a.x && v.x < a.right());
+// The combined-time bound, asserted structurally across the full domains: no (attack, decay,
-            CHECK(v.y >= a.y && v.y < a.bottom());
+// fraction) triple can exceed the span, and no clamp on the SUM exists to be exercised.
+static void testAhdSplitNeverExceedsTheSpan() {
+    const double span = 3.0;
+    for (int ai = 0; ai <= 20; ++ai) {
+        for (int di = 0; di <= 20; ++di) {
+            for (int fi = 0; fi <= 10; ++fi) {
+                const StageEnvelope e =
+                    ahd(ai * 0.25, di * 0.25, fi * 0.1, 0.0, span);
+                const AhdSplit s = splitAhdSeconds(e);
+                CHECK(s.attack >= 0.0 && s.hold >= 0.0 && s.decay >= 0.0);
+                CHECK(s.total <= span + 1e-9);
+                CHECK(std::fabs(s.total - (s.attack + s.hold + s.decay)) < 1e-12);
+            }
         }
     }
 }
 
-// --- Trigger polyline ---------------------------------------------------------
+static void testHoldFractionEndpoints() {
+    const StageEnvelope none = ahd(0.5, 0.5, 0.0, 0.0, 4.0);
+    const AhdSplit s0 = splitAhdSeconds(none);
+    CHECK(s0.hold == 0.0);
+    CHECK(std::fabs(s0.total - 1.0) < 1e-12);
 
-static void testTriggerShape() {
+    const StageEnvelope full = ahd(0.5, 0.5, 1.0, 0.0, 4.0);
-    // played span = length * total = 0.5 * 2.0 = 1.0s -> 500px wide. fadeIn .2 of play -> 0.2s
+    const AhdSplit s1 = splitAhdSeconds(full);
-    // (x@100), fade-out .3 of play -> begins at 0.7s (x@350), playEnd at 1.0s (x@500).
+    // 100% of what attack and decay left: 4 - 0.5 - 0.5 = 3.
-    AmpEnvelope env;
+    CHECK(std::fabs(s1.hold - 3.0) < 1e-12);
-    env.mode = EnvMode::Trigger;
+    CHECK(std::fabs(s1.total - 4.0) < 1e-12);
-    env.lengthFraction  = 0.5;
-    env.fadeInFraction  = 0.2;
-    env.fadeOutFraction = 0.3;
-    const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
 
-    CHECK(poly.size() == 4);
+    // Attack + decay alone longer than the span: they fit by their own per-stage bounds and the
-    CHECK(poly[0].node == EnvNode::Origin);
+    // remainder — and therefore hold — is zero. Still no clamp on the sum.
-    CHECK(poly[1].node == EnvNode::FadeInEnd);
+    const AhdSplit s2 = splitAhdSeconds(ahd(3.0, 3.0, 1.0, 0.0, 4.0));
-    CHECK(poly[2].node == EnvNode::FadeOutStart);
+    CHECK(std::fabs(s2.attack - 3.0) < 1e-12);
-    CHECK(poly[3].node == EnvNode::LengthEnd);
+    CHECK(std::fabs(s2.decay - 1.0) < 1e-12);
-
+    CHECK(s2.hold == 0.0);
-    EnvVertex v;
+    CHECK(std::fabs(s2.total - 4.0) < 1e-12);
-    CHECK(findNode(poly, EnvNode::FadeInEnd, v)    && v.x == a.x + 100 && v.level == 1.0);
-    CHECK(findNode(poly, EnvNode::FadeOutStart, v) && v.x == a.x + 350 && v.level == 1.0);
-    CHECK(findNode(poly, EnvNode::LengthEnd, v)    && v.x == a.x + 500 && v.level == 0.0);
 }
 
-static void testTriggerFadeOverlapClamp() {
+// --- the AHD polyline ---------------------------------------------------------
-    // fadeIn + fadeOut > 1: the fade-out is trimmed so they meet exactly (no crossed nodes).
-    AmpEnvelope env;
-    env.mode = EnvMode::Trigger;
-    env.lengthFraction  = 1.0;   // played span = full 2.0s -> 1000px
-    env.fadeInFraction  = 0.8;   // fade-in end at 0.8*2.0 = 1.6s -> x@800
-    env.fadeOutFraction = 0.6;   // would be 1.4s -> clamped to 1-0.8=0.2 -> begins at 0.8*2.0 too
-    const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
 
-    EnvVertex fin, fout;
+// The 1:1 property: a stage boundary at N seconds sits over the waveform at N seconds.
-    CHECK(findNode(poly, EnvNode::FadeInEnd, fin));
+static void testAhdIsOneToOneWithTheTimeAxis() {
-    CHECK(findNode(poly, EnvNode::FadeOutStart, fout));
+    const Rect a = wideArea();
-    CHECK(fin.x == fout.x);   // fades meet exactly, never cross
+    const double total = 8.0;
-    CHECK(fin.x == a.x + 800);
+    const StageEnvelope e = ahd(1.0, 2.0, 0.5, 1.0, 6.0);
+    const std::vector<EnvVertex> poly = buildEnvelopePolyline(e, overlayOf(a), total);
+    const AhdSplit s = splitAhdSeconds(e);
+    EnvVertex origin, attack, hold, decay;
+    CHECK(findNode(poly, EnvNode::Origin, origin));
+    CHECK(findNode(poly, EnvNode::AttackEnd, attack));
+    CHECK(findNode(poly, EnvNode::HoldEnd, hold));
+    CHECK(findNode(poly, EnvNode::DecayEnd, decay));
+    CHECK(origin.x == timeToX(a, total, 1.0));
+    CHECK(attack.x == timeToX(a, total, 1.0 + s.attack));
+    CHECK(hold.x == timeToX(a, total, 1.0 + s.attack + s.hold));
+    CHECK(decay.x == timeToX(a, total, 1.0 + s.total));
+    // Levels: rises to unity, holds, falls to zero. No sustain-only nodes exist.
+    CHECK(origin.level == 0.0 && attack.level == 1.0 && hold.level == 1.0 && decay.level == 0.0);
+    CHECK(!hasNode(poly, EnvNode::ReleaseStart));
+    CHECK(!hasNode(poly, EnvNode::ReleaseEnd));
+    CHECK(!hasNode(poly, EnvNode::ReleaseCurve));
 }
 
-static void testTriggerFullLengthZeroFadeOutInBounds() {
+// --- curve knots --------------------------------------------------------------
-    // The FA2 fix: at full length + zero fade-out, FadeOutStart and LengthEnd land AT the last
-    // in-bounds column (right-1), NOT at the half-open right edge — so the shell draws their
-    // handles and the fade-out node is grabbable even when fade-out == 0.
-    AmpEnvelope env;
-    env.mode = EnvMode::Trigger;
-    env.lengthFraction  = 1.0;
-    env.fadeInFraction  = 0.1;
-    env.fadeOutFraction = 0.0;
-    const Rect a = wideArea();
-    const std::vector<EnvVertex> poly = buildEnvelopePolyline(env, overlayOf(a), 2.0);
 
-    EnvVertex fout, lend;
+// A knot rides every sloped stage that has a duration, and none that does not — a zero-length
-    CHECK(findNode(poly, EnvNode::FadeOutStart, fout));
+// stage has no interior to put a handle in.
-    CHECK(findNode(poly, EnvNode::LengthEnd, lend));
+static void testKnotsRideOnlySlopedNonZeroSegments() {
-    CHECK(fout.x == a.right() - 1);   // present + in-bounds at zero fade-out
+    const Rect a = wideArea();
-    CHECK(lend.x == a.right() - 1);
+    const std::vector<EnvVertex> full =
-    CHECK(fout.level == 1.0 && lend.level == 0.0);
+        buildEnvelopePolyline(ahdsr(0.2, 0.2, 0.2, 0.5, 0.2), overlayOf(a), 4.0);
+    CHECK(hasNode(full, EnvNode::AttackCurve));
+    CHECK(hasNode(full, EnvNode::DecayCurve));
+    CHECK(hasNode(full, EnvNode::ReleaseCurve));
+
+    const std::vector<EnvVertex> flat =
+        buildEnvelopePolyline(ahdsr(0.0, 0.2, 0.0, 0.5, 0.0), overlayOf(a), 4.0);
+    CHECK(!hasNode(flat, EnvNode::AttackCurve));
+    CHECK(!hasNode(flat, EnvNode::DecayCurve));
+    CHECK(!hasNode(flat, EnvNode::ReleaseCurve));
+
+    const std::vector<EnvVertex> ahdPoly =
+        buildEnvelopePolyline(ahd(0.5, 0.5, 0.5, 0.0, 4.0), overlayOf(a), 4.0);
+    CHECK(hasNode(ahdPoly, EnvNode::AttackCurve));
+    CHECK(hasNode(ahdPoly, EnvNode::DecayCurve));
+    // Every knot is flagged as one and every stage node is not.
+    for (const EnvVertex& v : ahdPoly) {
+        const bool isKnot = v.node == EnvNode::AttackCurve || v.node == EnvNode::DecayCurve;
+        CHECK(v.knot == isKnot);
+    }
 }
 
-// --- Degenerate ---------------------------------------------------------------
+// The knot's HEIGHT is the exponent, read through the shared law: neutral sits at the segment
+// midpoint level, a larger exponent pulls the attack knot toward the floor, a smaller one
+// toward the ceiling. This is the visible half of the one-model rule.
+static void testKnotHeightTracksTheExponent() {
+    const Rect a = wideArea();
+    StageEnvelope e = ahdsr(0.4, 0.0, 0.0, 1.0, 0.0);
+    EnvVertex neutral, steep, shallow;
 
-static void testDegenerateFlatBaseline() {
+    e.attackCurve = 1.0;
-    AmpEnvelope env;   // any params
+    CHECK(findNode(buildEnvelopePolyline(e, overlayOf(a), 4.0), EnvNode::AttackCurve, neutral));
-    const Rect zeroW = Rect::ltrb(0, 0, 0, 100);
+    CHECK(std::fabs(neutral.level - 0.5) < 1e-12);   // linear: half way up at half way across
-    const std::vector<EnvVertex> p1 = buildEnvelopePolyline(env, overlayOf(zeroW), 2.0);
+    CHECK(neutral.y == levelToY(a, 0.5));
-    CHECK(p1.size() == 2);                       // always a drawable line
-    CHECK(p1.front().level == 0.0 && p1.back().level == 0.0);
 
-    const Rect ok = wideArea();
+    e.attackCurve = 4.0;
-    const std::vector<EnvVertex> p2 = buildEnvelopePolyline(env, overlayOf(ok), 0.0);  // no duration
+    CHECK(findNode(buildEnvelopePolyline(e, overlayOf(a), 4.0), EnvNode::AttackCurve, steep));
-    CHECK(p2.size() == 2);
+    CHECK(steep.level < neutral.level);
-    CHECK(p2.front().level == 0.0 && p2.back().level == 0.0);
+    CHECK(steep.y > neutral.y);                      // lower on screen
-    CHECK(p2.front().x == ok.x && p2.back().x == ok.right() - 1);   // spans the area, in-bounds
+
+    e.attackCurve = 0.25;
+    CHECK(findNode(buildEnvelopePolyline(e, overlayOf(a), 4.0), EnvNode::AttackCurve, shallow));
+    CHECK(shallow.level > neutral.level);
+    CHECK(shallow.y < neutral.y);
+
+    // The knot sits between its segment's endpoints in x, and inside the canvas in y.
+    CHECK(steep.x > a.x && steep.x < a.right() - 1);
+    CHECK(steep.y >= a.y && steep.y <= a.bottom() - 1);
+}
+
+// --- degenerate ---------------------------------------------------------------
+
+static void testDegenerateSurfaceYieldsFlatBaseline() {
+    const std::vector<EnvVertex> zeroArea =
+        buildEnvelopePolyline(ahdsr(0.1, 0.1, 0.1, 0.5, 0.1), overlayOf(Rect{}), 4.0);
+    CHECK(zeroArea.size() == 2);
+    CHECK(zeroArea[0].level == 0.0 && zeroArea[1].level == 0.0);
+    const std::vector<EnvVertex> zeroDur =
+        buildEnvelopePolyline(ahd(0.1, 0.1, 0.5, 0.0, 1.0), overlayOf(wideArea()), 0.0);
+    CHECK(zeroDur.size() == 2);
 }
 
 int main() {
     testTimeToXEndpoints();
-    testTimeToXNegativePinsLeft();
+    testTimeToXClampsBothEnds();
-    testTimeToXPastEndClamps();
+    testLevelToY();
-    testTimeToXDegenerate();
+    testDegenerateAreaAndDuration();
-    testGateTimedWidth();
-    testGatePxPerSecond();
-    testLevelToYEndpoints();
-    testLevelToYClamps();
 
-    testGateNodeOrderAndLevels();
+    testAhdsrNodeOrderAndLevels();
-    testGateSchematicPlacement();
+    testZeroReleasePutsTheSustainPlateauAtTheRightEdge();
-    testGateLayoutIndependentOfSampleDuration();
+    testReleaseGrowsLeftwardFromTheAnchor();
-    testGateMinSeparationAtDefaults();
+    testTierZeroDefaultsKeepEveryNodeDistinct();
-    testGateSustainPlateauFixedWidth();
+    testMaxedStagesCompressWithoutOverrunning();
-    testGateReleaseVisibleInBounds();
-    testGateOverrunCompressesFromRight();
-    testGateAllVerticesInBounds();
 
-    testTriggerShape();
+    testAhdSplitNeverExceedsTheSpan();
-    testTriggerFadeOverlapClamp();
+    testHoldFractionEndpoints();
-    testTriggerFullLengthZeroFadeOutInBounds();
+    testAhdIsOneToOneWithTheTimeAxis();
 
-    testDegenerateFlatBaseline();
+    testKnotsRideOnlySlopedNonZeroSegments();
+    testKnotHeightTracksTheExponent();
+
+    testDegenerateSurfaceYieldsFlatBaseline();
 
     if (g_fail == 0) std::printf("envelope_overlay: all tests passed\n");
     else std::printf("envelope_overlay: %d FAILED\n", g_fail);

tests/test_knob_deck.cpp

@@ -26,27 +26,27 @@ static int g_fail = 0;
 // toggle + row toggle), MASTER (1 cell, no toggle).
 static std::vector<DeckGroupDesc> shellLikeDeck() {
     std::vector<DeckGroupDesc> g;
-    g.push_back({0, 78, {100, 44}, {1, 2, 3, 4, 5}, {}});
+    g.push_back({0, 78, {}, {100, 44}, {1, 2, 3, 4, 5}, {}});
-    g.push_back({1, 38, {101, 48}, {6}, {}});
+    g.push_back({1, 38, {}, {101, 48}, {6}, {}});
-    g.push_back({2, 58, {102, 32}, {7, 8, 9}, {}});
+    g.push_back({2, 58, {}, {102, 32}, {7, 8, 9}, {}});
-    g.push_back({3, 38, {103, 40}, {10}, {104, 44}});
+    g.push_back({3, 38, {}, {103, 40}, {10}, {104, 44}});
-    g.push_back({4, 46, {}, {11}, {}});
+    g.push_back({4, 46, {}, {}, {11}, {}});
     return g;
 }
 
 static void testGroupWidth() {
     // Knob row dominates: 5 cells (240) > caption row (78 + 4 + 88 = 170) -> 240 + 2*6.
-    DeckGroupDesc amp{0, 78, {100, 44}, {1, 2, 3, 4, 5}, {}};
+    DeckGroupDesc amp{0, 78, {}, {100, 44}, {1, 2, 3, 4, 5}, {}};
     CHECK(deckGroupWidth(amp) == 5 * kDeckCellW + 2 * kDeckGroupPadX);
     // Caption row dominates: 38 + 4 + 96 = 138 > 48 -> 138 + 12.
-    DeckGroupDesc pitch{1, 38, {101, 48}, {6}, {}};
+    DeckGroupDesc pitch{1, 38, {}, {101, 48}, {6}, {}};
     CHECK(deckGroupWidth(pitch) == 38 + kDeckToggleGap + 2 * 48 + 2 * kDeckGroupPadX);
     // Row toggle counts into the knob row: 48 + 4 + 88 = 140 > caption 38+4+80=122.
-    DeckGroupDesc voice{3, 38, {103, 40}, {10}, {104, 44}};
+    DeckGroupDesc voice{3, 38, {}, {103, 40}, {10}, {104, 44}};
     CHECK(deckGroupWidth(voice) ==
           kDeckCellW + kDeckToggleGap + 2 * 44 + 2 * kDeckGroupPadX);
     // No toggles: max(caption, cells) + padding.
-    DeckGroupDesc master{4, 46, {}, {11}, {}};
+    DeckGroupDesc master{4, 46, {}, {}, {11}, {}};
     CHECK(deckGroupWidth(master) == kDeckCellW + 2 * kDeckGroupPadX);
 }
 
@@ -148,7 +148,7 @@ static void testHitTest() {
 
     // A blank cell (id -1) misses even though its rect exists.
     std::vector<DeckGroupDesc> trig;
-    trig.push_back({0, 78, {100, 44}, {20, 21, 22, -1, -1}, {}});
+    trig.push_back({0, 78, {}, {100, 44}, {20, 21, 22, -1, -1}, {}});
     const DeckLayout tl = layoutDeck(trig, 0, 0, 824);
     const DeckCellLayout& blank = tl.groups[0].cells[4];
     CHECK(blank.id == -1);
@@ -162,6 +162,49 @@ static void testHitTest() {
     CHECK(h.kind == DeckHitKind::None);
 }
 
+// The corner radio widens the caption row, takes the far corner, and pushes the caption
+// toggle left of itself — the three properties the overlay-select switch relies on.
+static void testCaptionRadioGeometryAndHit() {
+    const DeckGroupDesc bare{7, 78, {}, {200, 44}, {1, 2}, {}};
+    const DeckGroupDesc withRadio{7, 78, {201}, {200, 44}, {1, 2}, {}};
+    // Caption row grows by exactly gap + radio; the knob row is unchanged, so a group whose
+    // caption row already dominated grows by that much.
+    CHECK(deckGroupWidth(withRadio) - deckGroupWidth(bare) ==
+          kDeckToggleGap + kDeckRadioSize);
+
+    std::vector<DeckGroupDesc> g{withRadio};
+    const DeckLayout dl = layoutDeck(g, 0, 0, 800);
+    const DeckGroupLayout& lay = dl.groups[0];
+    CHECK(lay.captionRadio.id == 201);
+    CHECK(lay.captionRadio.box.width == kDeckRadioSize);
+    // Far corner: flush with the group's inner right edge.
+    CHECK(lay.captionRadio.box.right() == lay.box.right() - kDeckGroupPadX);
+    // The toggle sits entirely left of the radio, and the caption text left of the toggle.
+    CHECK(lay.captionToggle.seg1.right() <= lay.captionRadio.box.x);
+    CHECK(lay.caption.right() <= lay.captionToggle.seg0.x);
+
+    const DeckHit h = hitTestDeck(dl, lay.captionRadio.box.x + 2, lay.captionRadio.box.y + 2);
+    CHECK(h.kind == DeckHitKind::CaptionRadio && h.id == 201);
+}
+
+// The inner dial is a concentric sub-region of the knob: a grab there still names the cell,
+// with `inner` set, so a cell with no inner value simply ignores the flag.
+static void testInnerDialHit() {
+    const std::vector<DeckGroupDesc> g = shellLikeDeck();
+    const DeckLayout dl = layoutDeck(g, 0, 0, 900);
+    const DeckCellLayout& c = dl.groups[0].cells[0];
+    CHECK(c.inner.width == kDeckInnerDialSize && c.inner.height == kDeckInnerDialSize);
+    // Concentric with the knob square.
+    CHECK(c.inner.x + c.inner.width / 2 == c.knob.x + c.knob.width / 2);
+    CHECK(c.inner.y + c.inner.height / 2 == c.knob.y + c.knob.height / 2);
+
+    DeckHit h = hitTestDeck(dl, c.inner.x + c.inner.width / 2, c.inner.y + c.inner.height / 2);
+    CHECK(h.kind == DeckHitKind::Knob && h.id == c.id && h.inner);
+    // A grab on the outer ring is the same cell WITHOUT the inner flag.
+    h = hitTestDeck(dl, c.knob.x + 1, c.knob.y + 1);
+    CHECK(h.kind == DeckHitKind::Knob && h.id == c.id && !h.inner);
+}
+
 static void testEmptyDeck() {
     const std::vector<DeckGroupDesc> none;
     CHECK(deckRowCount(none, 800) == 0);
@@ -176,6 +219,8 @@ int main() {
     testFirstGroupAlwaysPlaces();
     testGroupInnerGeometry();
     testHitTest();
+    testCaptionRadioGeometryAndHit();
+    testInnerDialHit();
     testEmptyDeck();
     if (g_fail) {
         std::printf("%d FAILURE(S)\n", g_fail);

tests/test_live_delivery.cpp

@@ -191,36 +191,76 @@ static void testSustainLevelChangeGlides() {
 }
 
 static void testPitchEnvelopeHoldsPhaseAndGlidesDepth() {
+    // No hold stage, so the shape is the attack-decay one the pre-AHD envelope had.
     PitchEnvParams p;
     p.enabled = true;
-    p.attackFrames = 0;
-    p.decayFrames = 1000;
     p.peakSemitones = 12.0;
+    p.shape.attackFrames = 0;
+    p.shape.decayFrames = 1000;
+    p.shape.holdFraction = 0.0;
     PitchEnvelope a, b;
-    a.configure(p);
+    a.configure(100000, p);
-    b.configure(p);
+    b.configure(100000, p);
     a.noteOn();
     b.noteOn();
     for (int i = 0; i < 400; ++i) { a.tick(); b.tick(); }
 
-    b.applyLive(0, 2000, 12.0);  // decay doubled mid-decay
+    PitchEnvParams longer = p;
+    longer.shape.decayFrames = 2000;
+    b.applyLive(longer);          // decay doubled mid-decay
     CHECK(a.tick() == b.tick());  // phi held: the semitone offset is unchanged this frame
 
     // A depth move is a level step, so it glides rather than jumping: the first frame after
     // the edit is exactly what the unedited peer emits.
     PitchEnvelope c, d;
-    c.configure(p);
+    c.configure(100000, p);
-    d.configure(p);
+    d.configure(100000, p);
     c.noteOn();
     d.noteOn();
     for (int i = 0; i < 400; ++i) { c.tick(); d.tick(); }
-    c.applyLive(0, 1000, 0.0);  // depth to zero mid-decay
+    PitchEnvParams noDepth = p;
+    noDepth.peakSemitones = 0.0;
+    c.applyLive(noDepth);  // depth to zero mid-decay
     CHECK(c.tick() == d.tick());
     // ...and it does eventually reach the new depth rather than staying put.
     for (int i = 0; i < 400; ++i) c.tick();
     CHECK(c.tick() == 0.0);
 }
 
+// The pitch envelope's new middle stage, on the same phi rule: a hold dialled mid-hold keeps
+// the level (flat by definition) and moves the boundary, and the fraction is taken against
+// what attack and decay left rather than against the whole span.
+static void testPitchEnvelopeHoldStagePlaysAndHoldsPhase() {
+    PitchEnvParams p;
+    p.enabled = true;
+    p.peakSemitones = 12.0;
+    p.shape.attackFrames = 100;
+    p.shape.decayFrames = 100;
+    p.shape.holdFraction = 0.5;  // half of (1000 - 200) = 400 frames of hold
+    PitchEnvelope e;
+    e.configure(1000, p);
+    e.noteOn();
+    for (int i = 0; i < 100; ++i) e.tick();      // through the attack
+    CHECK(e.tick() == 12.0);                     // frame 100: at the peak, holding
+    for (int i = 0; i < 398; ++i) e.tick();      // to the last frame of the hold
+    CHECK(e.tick() == 12.0);                     // frame 499: still holding
+    CHECK(e.tick() == 12.0);                     // frame 500: decay's own first frame
+    CHECK(std::fabs(e.tick() - 12.0 * (1.0 - 1.0 / 100.0)) < 1e-12);  // frame 501: descending
+
+    // A live hold change mid-hold is continuous (the stage is flat) and the envelope still
+    // finishes inside the span.
+    PitchEnvelope f;
+    f.configure(1000, p);
+    f.noteOn();
+    for (int i = 0; i < 300; ++i) f.tick();
+    PitchEnvParams wider = p;
+    wider.shape.holdFraction = 1.0;
+    f.applyLive(wider);
+    CHECK(f.tick() == 12.0);
+    for (int i = 0; i < 1200; ++i) f.tick();
+    CHECK(f.tick() == 0.0);
+}
+
 // --- The fresh-note path: snap, never the phi rule ---------------------------------------
 
 static void testAFreshEnvelopeTakesANewlyDialledStageTimeOutright() {
@@ -258,9 +298,12 @@ static void testAFreshPitchEnvelopeTakesTheNewTimesOutright() {
     PitchEnvParams stale;  // enabled, but every leg zero
     stale.enabled = true;
     PitchEnvelope env;
-    env.configure(stale);
+    env.configure(100000, stale);
     env.noteOn();
-    env.snapLive(0, 1000, 12.0);
+    PitchEnvParams dialled = stale;
+    dialled.peakSemitones = 12.0;
+    dialled.shape.decayFrames = 1000;
+    env.snapLive(dialled);
     CHECK(env.tick() == 12.0);  // at the top of the new decay leg, not past the envelope
     for (int i = 0; i < 499; ++i) env.tick();
     CHECK(std::fabs(env.tick() - 6.0) < 1e-12);
@@ -412,25 +455,25 @@ static void testEveryEnvelopeStageTimeAndLevelMovesTheSoundingNote() {
         {"pitch env attack",
          [](SampleData& s) {
              s.play.pitchEnv.enabled = true;
-             s.play.pitchEnv.attackFrames = 48000;
+             s.play.pitchEnv.shape.attackFrames = 48000;
-             s.play.pitchEnv.decayFrames = 48000;
+             s.play.pitchEnv.shape.decayFrames = 48000;
              s.play.pitchEnv.peakSemitones = 12.0;
          },
-         [](LiveValues& v) { v.pitchEnvAttackFrames = 4000; }, -1},
+         [](LiveValues& v) { v.pitchEnv.shape.attackFrames = 4000; }, -1},
         {"pitch env decay",
          [](SampleData& s) {
              s.play.pitchEnv.enabled = true;
-             s.play.pitchEnv.decayFrames = 48000;
+             s.play.pitchEnv.shape.decayFrames = 48000;
              s.play.pitchEnv.peakSemitones = 12.0;
          },
-         [](LiveValues& v) { v.pitchEnvDecayFrames = 8000; }, -1},
+         [](LiveValues& v) { v.pitchEnv.shape.decayFrames = 8000; }, -1},
         {"pitch env depth",
          [](SampleData& s) {
              s.play.pitchEnv.enabled = true;
-             s.play.pitchEnv.decayFrames = 480000;
+             s.play.pitchEnv.shape.decayFrames = 480000;
              s.play.pitchEnv.peakSemitones = 12.0;
          },
-         [](LiveValues& v) { v.pitchEnvPeakSemitones = 0.0; }, -1},
+         [](LiveValues& v) { v.pitchEnv.peakSemitones = 0.0; }, -1},
     };
     for (const Case& c : cases) {
         assertLiveFieldMovesTheSoundingNote(c.name, c.rig, c.mutate, c.noteOffBlock);
@@ -646,9 +689,9 @@ static void testPitchRatioAndVelocityGainStayLatched() {
     hostile.filterKeyTrack = 2.0;
     hostile.filterSettings.cutoffNorm = 0.0f;
     hostile.filterModAmount = 1.0;
-    hostile.pitchEnvAttackFrames = 4800;
+    hostile.pitchEnv.shape.attackFrames = 4800;
-    hostile.pitchEnvDecayFrames = 4800;
+    hostile.pitchEnv.shape.decayFrames = 4800;
-    hostile.pitchEnvPeakSemitones = 24.0;
+    hostile.pitchEnv.peakSemitones = 24.0;
     hostile.adsr.attackFrames = 96000;  // a timed stage the voice is already past
     for (int blk = 0; blk < 8; ++blk) {
         if (blk == 2) block.publish(hostile);
@@ -696,7 +739,7 @@ static void testVelocityGainSurvivesAHostilePublishThatReallyLands() {
     filterSweep(rig);
     rig.play.filter.velAmount = 0.0;
     rig.play.pitchEnv.enabled = true;
-    rig.play.pitchEnv.decayFrames = 24000;
+    rig.play.pitchEnv.shape.decayFrames = 24000;
     rig.play.pitchEnv.peakSemitones = 3.0;
 
     LiveValues hostile = foldLive(rig.play);
@@ -705,9 +748,9 @@ static void testVelocityGainSurvivesAHostilePublishThatReallyLands() {
     hostile.filterModAmount = -1.0;
     hostile.filterEnv.decayFrames = 4800;
     hostile.filterEnv.sustainLevel = 0.0;
-    hostile.pitchEnvAttackFrames = 4800;
+    hostile.pitchEnv.shape.attackFrames = 4800;
-    hostile.pitchEnvDecayFrames = 4800;
+    hostile.pitchEnv.shape.decayFrames = 4800;
-    hostile.pitchEnvPeakSemitones = 24.0;
+    hostile.pitchEnv.peakSemitones = 24.0;
     hostile.adsr.sustainLevel = 0.4;
 
     SampleData quiet = rig, loud = rig, untouched = rig;
@@ -743,6 +786,7 @@ int main() {
     testShortenedStageStillLandsContinuously();
     testSustainLevelChangeGlides();
     testPitchEnvelopeHoldsPhaseAndGlidesDepth();
+    testPitchEnvelopeHoldStagePlaysAndHoldsPhase();
     testAFreshEnvelopeTakesANewlyDialledStageTimeOutright();
     testAFreshPitchEnvelopeTakesTheNewTimesOutright();
     testCutoffMoveAcrossPrepareDoesNotStep();

tests/test_live_params.cpp

@@ -27,7 +27,9 @@ static_assert(std::is_trivially_copyable_v<LiveValues>, "the live block must sta
 
 static void testFoldCarriesEveryContinuousControl() {
     PlayParams p;
-    p.adsr = AdsrParams{11, 22, 33, 0.44, 55};
+    p.adsr = AdsrParams{11, 22, 33, 0.44, 55, 2.0, 0.5, 3.0};
+    p.trigAhd = AhdParams{61, 62, 0.63, 4.0, 0.25};
+    p.filter.trigEnv = AhdParams{71, 72, 0.73, 5.0, 0.2};
     p.filter.enabled = true;
     p.filter.settings.cutoffNorm = 0.25f;
     p.filter.settings.resonanceNorm = 0.5f;
@@ -36,8 +38,7 @@ static void testFoldCarriesEveryContinuousControl() {
     p.filter.modAmount = -0.6;
     p.filter.keyTrack = 1.5;
     p.filter.env = AdsrParams{1, 2, 3, 0.4, 5};
-    p.pitchEnv.attackFrames = 7;
+    p.pitchEnv.shape = AhdParams{7, 9, 0.4, 1.5, 0.75};
-    p.pitchEnv.decayFrames = 9;
     p.pitchEnv.peakSemitones = -3.5;
 
     const LiveValues v = foldLive(p);
@@ -46,6 +47,17 @@ static void testFoldCarriesEveryContinuousControl() {
     CHECK(v.adsr.decayFrames == 33);
     CHECK(v.adsr.sustainLevel == 0.44);
     CHECK(v.adsr.releaseFrames == 55);
+    CHECK(v.adsr.attackCurve == 2.0);
+    CHECK(v.adsr.decayCurve == 0.5);
+    CHECK(v.adsr.releaseCurve == 3.0);
+    CHECK(v.ampAhd.attackFrames == 61);
+    CHECK(v.ampAhd.decayFrames == 62);
+    CHECK(v.ampAhd.holdFraction == 0.63);
+    CHECK(v.ampAhd.attackCurve == 4.0);
+    CHECK(v.ampAhd.decayCurve == 0.25);
+    CHECK(v.filterAhd.attackFrames == 71);
+    CHECK(v.filterAhd.holdFraction == 0.73);
+    CHECK(v.filterAhd.decayCurve == 0.2);
     CHECK(v.filterSettings.cutoffNorm == 0.25f);
     CHECK(v.filterSettings.resonanceNorm == 0.5f);
     CHECK(v.filterSettings.morphNorm == 0.75f);
@@ -54,9 +66,12 @@ static void testFoldCarriesEveryContinuousControl() {
     CHECK(v.filterKeyTrack == 1.5);
     CHECK(v.filterEnv.decayFrames == 3);
     CHECK(v.filterEnv.sustainLevel == 0.4);
-    CHECK(v.pitchEnvAttackFrames == 7);
+    CHECK(v.pitchEnv.shape.attackFrames == 7);
-    CHECK(v.pitchEnvDecayFrames == 9);
+    CHECK(v.pitchEnv.shape.decayFrames == 9);
-    CHECK(v.pitchEnvPeakSemitones == -3.5);
+    CHECK(v.pitchEnv.shape.holdFraction == 0.4);
+    CHECK(v.pitchEnv.shape.attackCurve == 1.5);
+    CHECK(v.pitchEnv.shape.decayCurve == 0.75);
+    CHECK(v.pitchEnv.peakSemitones == -3.5);
 }
 
 static void testUnpublishedBlockReadsAsNothing() {

tests/test_sample_map.cpp

@@ -566,8 +566,8 @@ static void testLegacyLiftDecision() {
 // --- resolvePlay: stored SECONDS -> engine FRAMES at the live rate --------------
 
 static void testResolvePlayConvertsWallClockAtTheRate() {
-    // Wall-clock times convert at the LIVE rate; source-timeline quantities (the Trigger
+    // Wall-clock times convert at the LIVE rate; the Trigger %-length, every hold FRACTION and
-    // %-length and its fades) carry through untouched, and levels/depths are not times.
+    // every curve exponent are rate-free and carry through untouched, as do levels and depths.
     PlaySeconds st;
     st.playMode = PlayMode::Trigger;
     st.adsr.attackSeconds = 0.01;
@@ -575,13 +575,20 @@ static void testResolvePlayConvertsWallClockAtTheRate() {
     st.adsr.decaySeconds = 0.02;
     st.adsr.sustainLevel = 0.8;
     st.adsr.releaseSeconds = 0.15;
+    st.adsr.attackCurve = 2.5;
+    st.adsr.decayCurve = 0.4;
+    st.adsr.releaseCurve = 3.5;
     st.trigger.lengthFraction = 0.75;
-    st.trigger.fadeInFrames = 441;
+    st.trigAhd.attackSeconds = 0.01;
-    st.trigger.fadeOutFrames = 882;
+    st.trigAhd.decaySeconds = 0.02;
+    st.trigAhd.holdFraction = 0.6;
+    st.trigAhd.attackCurve = 1.75;
+    st.trigAhd.decayCurve = 0.8;
     st.pitchEngine = PitchEngine::Preserve;
     st.pitchEnv.enabled = true;
-    st.pitchEnv.attackSeconds = 0.02;
+    st.pitchEnv.shape.attackSeconds = 0.02;
-    st.pitchEnv.decaySeconds = 0.03;
+    st.pitchEnv.shape.decaySeconds = 0.03;
+    st.pitchEnv.shape.holdFraction = 0.25;
     st.pitchEnv.peakSemitones = 5.0;
 
     const PlayParams at48 = resolvePlay(st, 48000);
@@ -591,13 +598,20 @@ static void testResolvePlayConvertsWallClockAtTheRate() {
     CHECK(at48.adsr.decayFrames == 960);
     CHECK(at48.adsr.sustainLevel == 0.8);       // a level, not a time
     CHECK(at48.adsr.releaseFrames == 7200);
+    CHECK(at48.adsr.attackCurve == 2.5);        // dimensionless
+    CHECK(at48.adsr.decayCurve == 0.4);
+    CHECK(at48.adsr.releaseCurve == 3.5);
     CHECK(at48.trigger.lengthFraction == 0.75); // source-timeline, unconverted
-    CHECK(at48.trigger.fadeInFrames == 441);
+    CHECK(at48.trigAhd.attackFrames == 480);
-    CHECK(at48.trigger.fadeOutFrames == 882);
+    CHECK(at48.trigAhd.decayFrames == 960);
+    CHECK(at48.trigAhd.holdFraction == 0.6);    // a fraction, not a time
+    CHECK(at48.trigAhd.attackCurve == 1.75);
+    CHECK(at48.trigAhd.decayCurve == 0.8);
     CHECK(at48.pitchEngine == PitchEngine::Preserve);
     CHECK(at48.pitchEnv.enabled);
-    CHECK(at48.pitchEnv.attackFrames == 960);
+    CHECK(at48.pitchEnv.shape.attackFrames == 960);
-    CHECK(at48.pitchEnv.decayFrames == 1440);
+    CHECK(at48.pitchEnv.shape.decayFrames == 1440);
+    CHECK(at48.pitchEnv.shape.holdFraction == 0.25);
     CHECK(at48.pitchEnv.peakSemitones == 5.0);  // a depth, not a time
 
     // THE no-hardcoded-rate contract: the SAME stored seconds yield different frame counts
@@ -606,8 +620,10 @@ static void testResolvePlayConvertsWallClockAtTheRate() {
     CHECK(at96.adsr.attackFrames == 960);
     CHECK(at96.adsr.holdFrames == 4800);
     CHECK(at96.adsr.releaseFrames == 14400);
-    CHECK(at96.pitchEnv.attackFrames == 1920);
+    CHECK(at96.pitchEnv.shape.attackFrames == 1920);
-    CHECK(at96.trigger.fadeInFrames == 441);    // still unconverted
+    CHECK(at96.trigAhd.attackFrames == 960);
+    CHECK(at96.trigAhd.holdFraction == 0.6);    // still unconverted
+    CHECK(at96.adsr.attackCurve == 2.5);
 }
 
 static void testResolvePlayCarriesTheFilterAndResolvesOnlyItsEnvelope() {

tests/test_sampler_core.cpp

@@ -1023,17 +1023,20 @@ static void testAhdsrHoldZeroEqualsAdsr() {
 }
 
 // A trigger-mode DC sample (all 1.0) so a rendered voice's output tracks the trigger envelope
-// * velocity directly. `play` sets Trigger mode + params; Varispeed so no shift colours the amp.
+// * velocity directly. `attack`/`decay` are the AHD's ramp lengths in frames, with Hold taking
+// the whole remainder — the shape that replaced the retired fade pair. Varispeed so no shift
+// colours the amp.
 static SampleData triggerSample(std::size_t frames, double lengthFraction,
-                                std::int64_t fadeIn, std::int64_t fadeOut,
+                                std::int64_t attack, std::int64_t decay,
                                 std::int64_t startFrame = 0) {
     SampleData s = dcSample(frames, 60);
     s.startFrame = startFrame;
     s.play.playMode = PlayMode::Trigger;
     s.play.pitchEngine = PitchEngine::Varispeed;  // isolate amp shape from pitch
     s.play.trigger.lengthFraction = lengthFraction;
-    s.play.trigger.fadeInFrames = fadeIn;
+    s.play.trigAhd.attackFrames = attack;
-    s.play.trigger.fadeOutFrames = fadeOut;
+    s.play.trigAhd.decayFrames = decay;
+    s.play.trigAhd.holdFraction = 1.0;
     return s;
 }
 
@@ -1181,10 +1184,13 @@ static void testPreserveDurationInvariance() {
     const std::size_t atUp = lengthAt(72);    // +12
     const std::size_t atDown = lengthAt(48);  // -12
     // All three within a small tolerance of the source length (Preserve holds duration). The
-    // tolerance covers the shifter's fill/latency edge, not a duration scaling (which would be 2x).
+    // tolerance covers the shifter's fill/latency edge and the terminal ring-out Preserve ends
-    CHECK(atRoot >= frames - 20 && atRoot <= frames + 20);
+    // on (voice.h's seedTerminalDeclick — bounded by the declick floor at ~185 frames), not a
-    CHECK(atUp >= frames - 20 && atUp <= frames + 20);
+    // duration scaling, which would be 2x.
-    CHECK(atDown >= frames - 20 && atDown <= frames + 20);
+    const std::size_t kTail = 200;
+    CHECK(atRoot >= frames - 20 && atRoot <= frames + kTail);
+    CHECK(atUp >= frames - 20 && atUp <= frames + kTail);
+    CHECK(atDown >= frames - 20 && atDown <= frames + kTail);
     // The decisive assertion: the up/down lengths track the root length (NOT halved/doubled).
     CHECK(atUp > frames / 2 + 200);   // an octave up did NOT halve the duration (Varispeed would)
     CHECK(atDown < frames * 2 - 200); // an octave down did NOT double it
@@ -1220,8 +1226,8 @@ static void testPitchEnvOffBitIdentical() {
         if (withDisabledEnv) {
             s.play.pitchEnv.enabled = false;         // explicitly disabled (offset always 0)
             s.play.pitchEnv.peakSemitones = 12.0;    // a depth that WOULD matter if enabled
-            s.play.pitchEnv.attackFrames = 0;
+            s.play.pitchEnv.shape.attackFrames = 0;
-            s.play.pitchEnv.decayFrames = 500;
+            s.play.pitchEnv.shape.decayFrames = 500;
         }
         SampleData km = (std::move(s));
         VoiceEngine eng(1, km);
@@ -1248,8 +1254,8 @@ static void testPitchEnvOnBendsVarispeed() {
     SampleData s = sineSample(n, 40.0, 60);
     s.play.pitchEngine = PitchEngine::Varispeed;
     s.play.pitchEnv.enabled = true;
-    s.play.pitchEnv.attackFrames = 0;         // start at the peak
+    s.play.pitchEnv.shape.attackFrames = 0;         // start at the peak
-    s.play.pitchEnv.decayFrames = 3000;       // glide to base over 3000 frames
+    s.play.pitchEnv.shape.decayFrames = 3000;       // glide to base over 3000 frames
     s.play.pitchEnv.peakSemitones = 12.0;     // +1 octave at t=0
     SampleData km = (std::move(s));
     VoiceEngine eng(1, km);

tests/test_staged_envelopes.cpp

@@ -0,0 +1,529 @@
+// Standalone tests for the STAGED ENVELOPE system in the pure engine — no VST3, no REAPER, no
+// framework. The engine's other seams are covered by sampler_core_tests (allocation, repitch,
+// loops), sampler_filter_tests (the filter in the voice path) and live_delivery_tests (what a
+// published block does to a sounding voice); this file covers what shape the envelopes have.
+//
+// Covers: the LINEAR NEUTRAL (exponent 1.0 reproduces the pre-curve evaluation bit for bit on
+// every sloped stage of all three envelopes); the exponent sweep across the full domain
+// (finite, monotone within a stage, never past the stage's endpoint levels); the AHD span split
+// (A+H+D can never exceed the span, for any triple, with no clamp on the sum; hold at 0% and
+// 100%); the Gate/Trigger shape switch on both the amp and the filter envelope, with each
+// mode's stage values surviving the other; and the Trigger tail's terminal behaviour under
+// Preserve in both voice modes, against a Varispeed render that must not change.
+
+#include "../src/core/instrument/engine/voice_engine.h"
+
+#include <algorithm>
+#include <cmath>
+#include <cstdio>
+#include <vector>
+
+using namespace reasampler;
+using namespace reasampler::instrument::engine;
+
+static int g_fail = 0;
+#define CHECK(cond) do { if(!(cond)) { \
+    std::printf("FAIL line %d: %s\n", __LINE__, #cond); ++g_fail; } } while(0)
+
+constexpr double kPi = 3.14159265358979323846;
+
+static SampleData dcSample(std::size_t frames, int rootNote = 60) {
+    SampleData s;
+    s.frames.assign(frames, 1.0f);
+    s.rootNote = rootNote;
+    s.sampleRate = 48000;
+    return s;
+}
+
+// --- The linear neutral -------------------------------------------------------
+
+// The migration bar, at the evaluator: with every exponent at 1.0 each sloped stage emits
+// EXACTLY the closed-form linear value the pre-curve engine emitted. Bit-identical, not close:
+// a hair of drift here is a project reopening with a different sound.
+static void testNeutralExponentReproducesTheLinearEvaluationExactly() {
+    // AHDSR attack, decay and release, each measured over its whole span.
+    AdsrParams p;
+    p.attackFrames = 400;
+    p.holdFrames = 0;
+    p.decayFrames = 500;
+    p.sustainLevel = 0.25;
+    p.releaseFrames = 300;
+    AdsrEnvelope env;
+    env.configure(p);
+    env.noteOn();
+    for (int i = 0; i < 400; ++i) {
+        CHECK(env.tick() == static_cast<double>(i) / 400.0);
+    }
+    for (int i = 0; i < 500; ++i) {
+        CHECK(env.tick() == 1.0 + (0.25 - 1.0) * (static_cast<double>(i) / 500.0));
+    }
+    CHECK(env.tick() == 0.25);  // sustain
+    env.noteOff();
+    for (int i = 0; i < 300; ++i) {
+        CHECK(env.tick() == 0.25 * (1.0 - static_cast<double>(i) / 300.0));
+    }
+
+    // The AHD's two sloped stages, against the same closed forms.
+    AhdParams a;
+    a.attackFrames = 200;
+    a.decayFrames = 300;
+    a.holdFraction = 0.0;
+    AhdEnvelope ahd;
+    ahd.configure(1000, a);
+    for (int i = 0; i < 200; ++i) {
+        CHECK(ahd.amplitudeAt(i) == static_cast<double>(i) / 200.0);
+    }
+    for (int i = 0; i < 300; ++i) {
+        CHECK(ahd.amplitudeAt(200 + i) == 1.0 - static_cast<double>(i) / 300.0);
+    }
+
+    // The pitch envelope's two, scaled by the depth.
+    PitchEnvParams pe;
+    pe.enabled = true;
+    pe.peakSemitones = 12.0;
+    pe.shape.attackFrames = 200;
+    pe.shape.decayFrames = 300;
+    pe.shape.holdFraction = 0.0;
+    PitchEnvelope pitch;
+    pitch.configure(1000, pe);
+    pitch.noteOn();
+    for (int i = 0; i < 200; ++i) {
+        CHECK(pitch.tick() == 12.0 * (static_cast<double>(i) / 200.0));
+    }
+    for (int i = 0; i < 300; ++i) {
+        CHECK(pitch.tick() == 12.0 * (1.0 - static_cast<double>(i) / 300.0));
+    }
+}
+
+// --- The exponent sweep -------------------------------------------------------
+
+// The whole domain including both endpoints: every emitted value finite, inside the stage's
+// own endpoint levels, and monotone in the stage's direction. An exponent can reshape a stage
+// but never make it overshoot or wander.
+static void testExponentSweepStaysFiniteMonotoneAndInRange() {
+    const double exps[] = {util::kCurveMin, 0.3, 0.7, 1.0, 2.0, 5.0, util::kCurveMax};
+    for (double e : exps) {
+        AdsrParams p;
+        p.attackFrames = 256;
+        p.decayFrames = 256;
+        p.sustainLevel = 0.3;
+        p.releaseFrames = 256;
+        p.attackCurve = e;
+        p.decayCurve = e;
+        p.releaseCurve = e;
+        AdsrEnvelope env;
+        env.configure(p);
+        env.noteOn();
+
+        double prev = -1.0;
+        for (int i = 0; i < 256; ++i) {  // attack: rises 0 -> 1
+            const double v = env.tick();
+            CHECK(std::isfinite(v));
+            CHECK(v >= 0.0 && v <= 1.0);
+            CHECK(v >= prev);
+            prev = v;
+        }
+        prev = 2.0;
+        for (int i = 0; i < 256; ++i) {  // decay: falls 1 -> sustain, never below it
+            const double v = env.tick();
+            CHECK(std::isfinite(v));
+            CHECK(v >= 0.3 - 1e-12 && v <= 1.0 + 1e-12);
+            CHECK(v <= prev);
+            prev = v;
+        }
+        env.tick();  // sustain
+        env.noteOff();
+        prev = 2.0;
+        for (int i = 0; i < 256; ++i) {  // release: falls to 0, never below
+            const double v = env.tick();
+            CHECK(std::isfinite(v));
+            CHECK(v >= -1e-12 && v <= 0.3 + 1e-12);
+            CHECK(v <= prev);
+            prev = v;
+        }
+
+        // The AHD's own two stages under the same exponent.
+        AhdParams a;
+        a.attackFrames = 256;
+        a.decayFrames = 256;
+        a.holdFraction = 0.0;
+        a.attackCurve = e;
+        a.decayCurve = e;
+        AhdEnvelope ahd;
+        ahd.configure(1000, a);
+        prev = -1.0;
+        for (int i = 0; i < 256; ++i) {
+            const double v = ahd.amplitudeAt(i);
+            CHECK(std::isfinite(v) && v >= 0.0 && v <= 1.0 && v >= prev);
+            prev = v;
+        }
+        prev = 2.0;
+        for (int i = 0; i < 256; ++i) {
+            const double v = ahd.amplitudeAt(256 + i);
+            CHECK(std::isfinite(v) && v >= 0.0 && v <= 1.0 && v <= prev);
+            prev = v;
+        }
+    }
+}
+
+// The exponent has to be AUDIBLE, not merely stored: the same stage at two exponents renders
+// measurably different levels at the same position.
+static void testExponentActuallyReshapesTheStage() {
+    AhdParams a;
+    a.attackFrames = 1000;
+    a.holdFraction = 0.0;
+    AhdEnvelope steep, shallow;
+    a.attackCurve = 8.0;
+    steep.configure(2000, a);
+    a.attackCurve = 0.15;
+    shallow.configure(2000, a);
+    CHECK(steep.amplitudeAt(500) < 0.05);
+    CHECK(shallow.amplitudeAt(500) > 0.85);
+    CHECK(shallow.amplitudeAt(500) - steep.amplitudeAt(500) > 0.5);
+}
+
+// --- The AHD span split -------------------------------------------------------
+
+// The combined-time bound, swept across the full domains: no (attack, decay, hold-fraction)
+// triple can push the sum past the span. The property is structural — Hold is a fraction of
+// what is LEFT — so there is no clamp on the sum for a case to slip past.
+static void testAhdSumNeverExceedsTheSpanForAnyTriple() {
+    const std::int64_t span = 1000;
+    for (std::int64_t a = 0; a <= 2000; a += 125) {
+        for (std::int64_t d = 0; d <= 2000; d += 125) {
+            for (int f = 0; f <= 10; ++f) {
+                AhdParams p;
+                p.attackFrames = a;
+                p.decayFrames = d;
+                p.holdFraction = f * 0.1;
+                const AhdSpan s = fitAhd(span, p);
+                CHECK(s.attack >= 0 && s.hold >= 0 && s.decay >= 0);
+                CHECK(s.total == s.attack + s.hold + s.decay);
+                CHECK(s.total <= span);
+                // And the envelope itself is silent at and past the fitted total.
+                AhdEnvelope e;
+                e.configure(span, p);
+                CHECK(e.amplitudeAt(static_cast<double>(s.total)) == 0.0);
+            }
+        }
+    }
+}
+
+static void testHoldFractionEndpoints() {
+    AhdParams p;
+    p.attackFrames = 100;
+    p.decayFrames = 200;
+
+    p.holdFraction = 0.0;
+    const AhdSpan none = fitAhd(1000, p);
+    CHECK(none.hold == 0);              // 0% takes no time at all
+    CHECK(none.total == 300);
+
+    p.holdFraction = 1.0;
+    const AhdSpan full = fitAhd(1000, p);
+    CHECK(full.hold == 700);            // exactly the remainder after attack and decay
+    CHECK(full.total == 1000);
+
+    // A negative/NaN fraction degrades to none rather than to a negative stage.
+    p.holdFraction = -1.0;
+    CHECK(fitAhd(1000, p).hold == 0);
+    p.holdFraction = std::nan("");
+    CHECK(fitAhd(1000, p).hold == 0);
+}
+
+// --- The Gate/Trigger shape switch --------------------------------------------
+
+// Each mode plays its OWN stage values: the parameter set carries both, so flipping to Trigger
+// and back cannot lose either mode's dialled envelope. Asserted on rendered output, not on the
+// struct — a voice reading the wrong field would still store the right one.
+static void testEachModePlaysItsOwnStageValuesAndTheOtherSurvives() {
+    SampleData s = dcSample(4000);
+    // Gate: a slow attack. Trigger: an instant onset and a long decay. Deliberately opposite,
+    // so a voice reading the wrong shape is unmistakable.
+    s.play.adsr.attackFrames = 2000;
+    s.play.adsr.sustainLevel = 1.0;
+    s.play.trigAhd.attackFrames = 0;
+    s.play.trigAhd.decayFrames = 2000;
+    s.play.trigAhd.holdFraction = 0.0;
+
+    const auto renderFirst = [&](PlayMode mode) {
+        SampleData copy = s;
+        copy.play.playMode = mode;
+        VoiceEngine eng(1, copy);
+        eng.noteOn(60, 127);
+        std::vector<AudioSample> out;
+        eng.render(out, 1000);
+        return out;
+    };
+
+    const std::vector<AudioSample> gate = renderFirst(PlayMode::Gate);
+    CHECK(gate[0] < 0.01f);                                   // halfway up a 2000-frame attack
+    CHECK(std::fabs(gate[999] - 999.0f / 2000.0f) < 1e-3f);
+
+    const std::vector<AudioSample> trig = renderFirst(PlayMode::Trigger);
+    CHECK(trig[0] > 0.99f);                                   // instant onset
+    CHECK(std::fabs(trig[999] - (1.0f - 999.0f / 2000.0f)) < 1e-3f);
+
+    // Back to Gate: the AHDSR values were never touched by the excursion.
+    const std::vector<AudioSample> again = renderFirst(PlayMode::Gate);
+    for (std::size_t i = 0; i < gate.size(); ++i) CHECK(again[i] == gate[i]);
+}
+
+// The same switch on the FILTER envelope, which follows the amp's rule rather than its own:
+// the two shapes are stored side by side and each mode reads only its own.
+static void testFilterEnvelopeFollowsTheModeShape() {
+    SampleData s = dcSample(4000);
+    s.play.filter.enabled = true;
+    s.play.filter.settings.cutoffNorm = 0.1f;
+    s.play.filter.modAmount = 0.9;
+    // Gate: the filter envelope opens slowly. Trigger: it opens instantly and closes.
+    s.play.filter.env.attackFrames = 2000;
+    s.play.filter.env.sustainLevel = 1.0;
+    s.play.filter.trigEnv.attackFrames = 0;
+    s.play.filter.trigEnv.decayFrames = 2000;
+    s.play.filter.trigEnv.holdFraction = 0.0;
+
+    const auto brightnessAt = [&](PlayMode mode, std::size_t frame) {
+        SampleData copy = s;
+        copy.play.playMode = mode;
+        // A DC source through a swept low-pass: the settled level tracks the corner, so the
+        // rendered value at a frame is a proxy for how far the envelope has opened it.
+        VoiceEngine eng(1, copy);
+        eng.noteOn(60, 127);
+        std::vector<AudioSample> out;
+        eng.render(out, frame + 1);
+        return static_cast<double>(out[frame]);
+    };
+
+    // Gate opens over time; Trigger starts open and closes. The orderings invert, which cannot
+    // happen if both modes read one envelope.
+    CHECK(brightnessAt(PlayMode::Gate, 20) < brightnessAt(PlayMode::Gate, 1500));
+    CHECK(brightnessAt(PlayMode::Trigger, 20) > brightnessAt(PlayMode::Trigger, 1500));
+}
+
+// --- The Trigger tail (item 4) ------------------------------------------------
+
+// The largest sample-to-sample step in the last `window` frames a voice actually produced,
+// plus where the voice stopped. A hard cut at a non-zero level shows up here as a step the
+// size of that level.
+struct TailMeasure {
+    double worstStep = 0.0;
+    double lastLevel = 0.0;
+    std::size_t soundingFrames = 0;
+};
+
+static TailMeasure renderTail(VoiceMode voiceMode, PitchEngine engine, std::size_t maxFrames) {
+    // A sine, not DC: the shifter's splice machinery needs real waveform to recycle, and a DC
+    // source would hide exactly the discontinuity under test.
+    SampleData s;
+    s.frames.resize(4000);
+    for (std::size_t i = 0; i < s.frames.size(); ++i) {
+        s.frames[i] = static_cast<float>(0.8 * std::sin(2.0 * kPi * static_cast<double>(i) / 40.0));
+    }
+    s.sampleRate = 48000;
+    s.rootNote = 60;
+    s.play.playMode = PlayMode::Trigger;
+    s.play.pitchEngine = engine;
+    s.play.trigger.lengthFraction = 1.0;
+    // The abrupt-end case the spec keeps representable: zero decay, so nothing in the ENVELOPE
+    // hides a discontinuity at the sample end.
+    s.play.trigAhd.attackFrames = 0;
+    s.play.trigAhd.decayFrames = 0;
+    s.play.trigAhd.holdFraction = 1.0;
+
+    VoiceEngine eng(1, s, /*preserveCap=*/0, /*window=*/512, voiceMode);
+    eng.noteOn(67, 127);  // transposed, so Preserve genuinely runs its shifter
+
+    TailMeasure m;
+    std::vector<AudioSample> out;
+    for (std::size_t f = 0; f < maxFrames; ++f) {
+        eng.render(out, 1);
+        if (eng.activeVoiceCount() == 0) break;
+        m.soundingFrames = f + 1;
+    }
+    // Include the frame after the voice freed: the cut itself is the step from the last
+    // sounding sample to the silence that follows it.
+    const std::size_t end = std::min(m.soundingFrames + 1, out.size());
+    for (std::size_t i = 1; i < end; ++i) {
+        m.worstStep = std::max(m.worstStep,
+                               std::fabs(static_cast<double>(out[i]) -
+                                         static_cast<double>(out[i - 1])));
+    }
+    if (m.soundingFrames > 0) m.lastLevel = std::fabs(static_cast<double>(out[end - 1]));
+    return m;
+}
+
+// A Trigger one-shot in Preserve must end without a terminal discontinuity, in both voice
+// modes. The threshold is stated rather than eyeballed: the source's own steepest
+// sample-to-sample slope is 0.8*2*pi/40 ~= 0.126, so the cut must not exceed what the waveform
+// itself already does. (Neither of us can judge this by ear — this is the measurable proxy;
+// the audible check is Daniel's.)
+static void testTriggerPreserveEndsWithoutATerminalDiscontinuity() {
+    const double kSourceSlope = 0.8 * 2.0 * kPi / 40.0;
+    for (VoiceMode vm : {VoiceMode::Poly, VoiceMode::Mono}) {
+        const TailMeasure m = renderTail(vm, PitchEngine::Preserve, 8000);
+        CHECK(m.soundingFrames > 0);
+        CHECK(m.worstStep <= kSourceSlope * 1.5);
+        // And the voice genuinely reaches silence rather than being left ringing.
+        CHECK(m.lastLevel < 1e-3);
+    }
+}
+
+// The same cut on the peer path: an AHD whose stages end BEFORE the play span (hold under
+// 100% with a zero decay) stops the voice mid-tail, and under Preserve that tail is just as
+// synthetic as the one at the sample end.
+static void testTriggerPreserveAhdEndingEarlyAlsoRingsOut() {
+    SampleData s;
+    s.frames.resize(4000);
+    for (std::size_t i = 0; i < s.frames.size(); ++i) {
+        s.frames[i] = static_cast<float>(0.8 * std::sin(2.0 * kPi * static_cast<double>(i) / 40.0));
+    }
+    s.sampleRate = 48000;
+    s.rootNote = 60;
+    s.play.playMode = PlayMode::Trigger;
+    s.play.pitchEngine = PitchEngine::Preserve;
+    s.play.trigger.lengthFraction = 1.0;
+    s.play.trigAhd.attackFrames = 0;
+    s.play.trigAhd.decayFrames = 0;
+    s.play.trigAhd.holdFraction = 0.25;  // ends at ~1000 frames, far short of the 4000-frame span
+
+    VoiceEngine eng(1, s, /*preserveCap=*/0, /*window=*/512);
+    eng.noteOn(67, 127);
+    std::vector<AudioSample> out;
+    std::size_t sounding = 0;
+    for (std::size_t f = 0; f < 4000; ++f) {
+        eng.render(out, 1);
+        if (eng.activeVoiceCount() == 0) break;
+        sounding = f + 1;
+    }
+    CHECK(sounding > 900 && sounding < 1400);  // the AHD ended, not the span
+    double worst = 0.0;
+    const std::size_t end = std::min(sounding + 1, out.size());
+    for (std::size_t i = 1; i < end; ++i) {
+        worst = std::max(worst, std::fabs(static_cast<double>(out[i]) -
+                                          static_cast<double>(out[i - 1])));
+    }
+    CHECK(worst <= (0.8 * 2.0 * kPi / 40.0) * 1.5);
+}
+
+// Varispeed is not implicated and must be left exactly as it was: its terminal sample is real
+// source content at its natural end, so no ring-out is armed there. Asserted as byte-identity
+// between two renders of the same rig, one of which would differ if the Preserve-only guard
+// were ever widened.
+static void testVarispeedTailIsUntouched() {
+    const auto render = [](std::size_t frames) {
+        SampleData s;
+        s.frames.resize(2000);
+        for (std::size_t i = 0; i < s.frames.size(); ++i) {
+            s.frames[i] = static_cast<float>(0.8 * std::sin(2.0 * kPi * static_cast<double>(i) / 40.0));
+        }
+        s.sampleRate = 48000;
+        s.rootNote = 60;
+        s.play.playMode = PlayMode::Trigger;
+        s.play.pitchEngine = PitchEngine::Varispeed;
+        s.play.trigger.lengthFraction = 1.0;
+        s.play.trigAhd.holdFraction = 1.0;
+        VoiceEngine eng(1, s);
+        eng.noteOn(60, 127);  // unity ratio: the read head walks the source frame for frame
+        std::vector<AudioSample> out;
+        eng.render(out, frames);
+        return out;
+    };
+    const std::vector<AudioSample> out = render(2400);
+    // Unity Varispeed reproduces the source exactly through its span, then stops dead — the
+    // pre-change behaviour, with no ring-out appended.
+    for (std::size_t i = 0; i < 2000; ++i) {
+        CHECK(out[i] == static_cast<float>(0.8 * std::sin(2.0 * kPi * static_cast<double>(i) / 40.0)));
+    }
+    for (std::size_t i = 2000; i < out.size(); ++i) CHECK(out[i] == 0.0f);
+}
+
+// --- Migration contour --------------------------------------------------------
+
+// The retired fade pair was an EQUAL-POWER ramp (sin/cos); the AHD that replaced it is the
+// curve law's neutral, which is LINEAR. Migration preserves the stage LENGTHS exactly, so the
+// contour tracks the old one to within the fixed sin(x)-vs-x gap — max |sin(t*pi/2) - t| over
+// [0,1], which is ~0.2105 at t ~= 0.4. Stated as the measured bound rather than judged: whether
+// that difference matters is Daniel's call, not this test's.
+static void testMigratedFadeContourMatchesTheRetiredShapeWithinTheStatedBound() {
+    const std::int64_t span = 1000;
+    const std::int64_t fadeIn = 200;
+    const std::int64_t fadeOut = 300;
+
+    AhdParams migrated;
+    migrated.attackFrames = fadeIn;   // Attack <- fade-in
+    migrated.decayFrames = fadeOut;   // Decay  <- fade-out
+    migrated.holdFraction = 1.0;      // Hold   <- the whole remainder
+    AhdEnvelope ahd;
+    ahd.configure(span, migrated);
+    // Stage LENGTHS are exact: the fades land on the same frames they always did.
+    CHECK(ahd.stages().attack == fadeIn);
+    CHECK(ahd.stages().decay == fadeOut);
+    CHECK(ahd.stages().total == span);
+
+    // The pre-change evaluator, written out so the comparison is against a stated reference
+    // rather than against whatever the code now does.
+    const auto retired = [&](double off) {
+        if (off < 0.0 || off >= static_cast<double>(span)) return 0.0;
+        if (off < static_cast<double>(fadeIn)) {
+            return std::sin(off / static_cast<double>(fadeIn) * (kPi / 2.0));
+        }
+        const double foStart = static_cast<double>(span - fadeOut);
+        if (off >= foStart) {
+            return std::cos((off - foStart) / static_cast<double>(fadeOut) * (kPi / 2.0));
+        }
+        return 1.0;
+    };
+
+    double worst = 0.0;
+    for (std::int64_t i = 0; i < span; ++i) {
+        worst = std::max(worst, std::fabs(ahd.amplitudeAt(static_cast<double>(i)) -
+                                          retired(static_cast<double>(i))));
+    }
+    CHECK(worst <= 0.2106);            // the sin-vs-linear bound, and nothing beyond it
+    // Both agree exactly where it matters structurally: the onset, the plateau, and the end.
+    CHECK(ahd.amplitudeAt(0.0) == retired(0.0));
+    CHECK(ahd.amplitudeAt(600.0) == retired(600.0));
+    CHECK(ahd.amplitudeAt(static_cast<double>(span)) == retired(static_cast<double>(span)));
+}
+
+// A prior ZERO fade-out migrates to Decay = 0 and keeps the abrupt end the old controls could
+// express — nothing the retired mechanism could say is lost.
+static void testZeroFadeOutMigratesToAnAbruptEnd() {
+    AhdParams migrated;
+    migrated.attackFrames = 0;
+    migrated.decayFrames = 0;
+    migrated.holdFraction = 1.0;
+    AhdEnvelope ahd;
+    ahd.configure(500, migrated);
+    CHECK(ahd.amplitudeAt(0.0) == 1.0);
+    CHECK(ahd.amplitudeAt(499.0) == 1.0);   // still at unity on the last frame
+    CHECK(ahd.amplitudeAt(500.0) == 0.0);   // and off on the next
+    CHECK(ahd.finished());
+}
+
+int main() {
+    testNeutralExponentReproducesTheLinearEvaluationExactly();
+    testExponentSweepStaysFiniteMonotoneAndInRange();
+    testExponentActuallyReshapesTheStage();
+
+    testAhdSumNeverExceedsTheSpanForAnyTriple();
+    testHoldFractionEndpoints();
+
+    testEachModePlaysItsOwnStageValuesAndTheOtherSurvives();
+    testFilterEnvelopeFollowsTheModeShape();
+
+    testTriggerPreserveEndsWithoutATerminalDiscontinuity();
+    testTriggerPreserveAhdEndingEarlyAlsoRingsOut();
+    testVarispeedTailIsUntouched();
+
+    testMigratedFadeContourMatchesTheRetiredShapeWithinTheStatedBound();
+    testZeroFadeOutMigratesToAnAbruptEnd();
+
+    if (g_fail == 0) {
+        std::printf("all staged_envelopes tests passed\n");
+        return 0;
+    }
+    std::printf("%d staged_envelopes check(s) failed\n", g_fail);
+    return 1;
+}

tests/test_theme.cpp

@@ -121,6 +121,27 @@ static void testSecondaryTertiaryAreDistinguishable() {
     CHECK(delta >= 60);
 }
 
+// The instrument's envelope overlay is traced OVER the waveform, which draws in the primary
+// accent — an accent-on-accent pair no floor covers, since neither is a surface. It moved from
+// the secondary to the tertiary for exactly this reason, so the pair is pinned two ways: the
+// tertiary must separate from the primary MORE than the secondary did (the measurable half of
+// the move), and the separation is a hue one, since two pastels sit close in luminance by
+// construction. Whether the result reads clearly is a perceptual call, not this test's.
+static void testOverlayAccentSeparatesFromTheWaveformAccent() {
+    const KitColor wave = roleColor(Role::AccentPrimary);
+    const KitColor overlay = roleColor(Role::AccentTertiary);
+    const KitColor prior = roleColor(Role::AccentSecondary);
+    CHECK(contrastRatio(overlay, wave) > contrastRatio(prior, wave));
+    // Hue divergence against the waveform: the waveform's green dominates its red, the
+    // overlay's red dominates its green — opposite balances, not two shades of one.
+    CHECK(wave.g > wave.r);
+    CHECK(overlay.r > overlay.g);
+    const int delta = std::abs(int(wave.r) - int(overlay.r)) +
+                      std::abs(int(wave.g) - int(overlay.g)) +
+                      std::abs(int(wave.b) - int(overlay.b)) ;
+    CHECK(delta >= 60);
+}
+
 static void testWarnClearsStateFloorOnBackground() {
     // warn (destructive) must be unmistakable -> clears the state floor on the base.
     CHECK(contrastRatio(roleColor(Role::Warn), roleColor(Role::BgBase))
@@ -237,6 +258,7 @@ int main() {
     testTextOnPastelFillClearsBodyFloor();
     testTextOnHoverSurfaceClearsFloor();
     testSecondaryTertiaryAreDistinguishable();
+    testOverlayAccentSeparatesFromTheWaveformAccent();
     testWarnClearsStateFloorOnBackground();
     testLabelOnActiveSurfaceClearsFloor();
     testRolesAreDistinctAndElevationMonotonic();

tests/test_trigger_seam.cpp

@@ -1,10 +1,9 @@
 // Standalone tests for reasampler::instrument::map::trigger_seam — no VST3, no REAPER, no framework.
 // Same fast assert loop as the sibling pure tests.
 //
-// Covers: triggerPlayLength (zero play length, startFrame set, startFrame past frameCount,
+// Covers triggerPlayLength: zero play length, startFrame set, startFrame past frameCount,
-// rounding); framesToFadeFraction (zero play length, basic ratio); fadeFractionToFrames
+// rounding, and the Finding 1 regression (start-point set — the case that was broken before
-// (zero play length, rounding); round-trip fidelity; the Finding 1 regression (start-point
+// this module existed).
-// set — the case that was broken before this module existed).
 
 #include "../src/core/instrument/map/trigger_seam.h"
 
@@ -58,85 +57,6 @@ static void testPlayLengthRounding() {
     CHECK(triggerPlayLength(0.6, 3, 0) == 2);
 }
 
-// --- framesToFadeFraction -----------------------------------------------------
-
-static void testFramesToFadeFractionBasic() {
-    // 100 frames fade over 1000 play length -> 0.1.
-    const double frac = framesToFadeFraction(100, 1000);
-    CHECK(frac > 0.0999 && frac < 0.1001);
-}
-
-static void testFramesToFadeFractionZeroPlayLength() {
-    // Degenerate: zero play length -> 0.0 (no division by zero).
-    CHECK(framesToFadeFraction(100, 0) == 0.0);
-    CHECK(framesToFadeFraction(0, 0) == 0.0);
-}
-
-static void testFramesToFadeFractionFullSpan() {
-    // fadeFrames == playLength -> fraction 1.0.
-    const double frac = framesToFadeFraction(500, 500);
-    CHECK(frac > 0.9999 && frac < 1.0001);
-}
-
-// --- fadeFractionToFrames -----------------------------------------------------
-
-static void testFadeFractionToFramesBasic() {
-    // 0.1 of 1000 play length -> round(100.0) = 100.
-    CHECK(fadeFractionToFrames(0.1, 1000) == 100);
-}
-
-static void testFadeFractionToFramesZeroPlayLength() {
-    // Degenerate: play length 0 -> 0 frames.
-    CHECK(fadeFractionToFrames(0.5, 0) == 0);
-}
-
-static void testFadeFractionToFramesRounding() {
-    // 0.333... of 3 -> round(1.0) = 1.
-    CHECK(fadeFractionToFrames(1.0 / 3.0, 3) == 1);
-    // 0.5 of 3 -> round(1.5) = 2.
-    CHECK(fadeFractionToFrames(0.5, 3) == 2);
-}
-
-// --- Round-trip ---------------------------------------------------------------
-
-static void testRoundTripNoStartPoint() {
-    // Pack then unpack: fadeInFrames should survive (within 1 frame of rounding).
-    // frameCount=44100, startFrame=0, lengthFraction=1.0 -> playLength=44100.
-    // fadeInFrames = 2205 (5% of 44100).
-    const std::int64_t fadeIn = 2205;
-    const std::int64_t playLen = triggerPlayLength(1.0, 44100, 0);
-    const double frac = framesToFadeFraction(fadeIn, playLen);
-    const std::int64_t recovered = fadeFractionToFrames(frac, playLen);
-    // Should be exact (2205 / 44100 * 44100 = 2205.0).
-    CHECK(recovered == fadeIn);
-}
-
-static void testRoundTripWithStartPoint() {
-    // The Finding 1 case: startFrame set. frameCount=44100, startFrame=8820 (20%).
-    // postStart=35280, lengthFraction=1.0 -> playLength=35280.
-    // fadeInFrames = 1764 (5% of 35280).
-    const std::int64_t frameCount = 44100;
-    const std::int64_t startFrame = 8820;
-    const std::int64_t fadeIn = 1764;
-    const std::int64_t playLen = triggerPlayLength(1.0, frameCount, startFrame);
-    CHECK(playLen == 35280);
-    const double frac = framesToFadeFraction(fadeIn, playLen);
-    const std::int64_t recovered = fadeFractionToFrames(frac, playLen);
-    CHECK(recovered == fadeIn);
-}
-
-static void testRoundTripFadeGreaterThanSpan() {
-    // fadeFrames > playLength -> fraction > 1 (returned unclamped; the overlay clamps at draw).
-    // The shell is responsible for clamping before writing AmpEnvelope.
-    const std::int64_t playLen = 100;
-    const std::int64_t fadeIn = 150;
-    const double frac = framesToFadeFraction(fadeIn, playLen);
-    CHECK(frac > 1.0);  // intentionally unclamped from this module's perspective
-    // The round-trip still recovers the original fade, so the shell can clamp after.
-    const std::int64_t recovered = fadeFractionToFrames(frac, playLen);
-    CHECK(recovered == fadeIn);
-}
-
 int main() {
     testPlayLengthNoStartPoint();
     testPlayLengthWithStartPoint();
@@ -144,18 +64,6 @@ int main() {
     testPlayLengthStartFramePastEnd();
     testPlayLengthRounding();
 
-    testFramesToFadeFractionBasic();
-    testFramesToFadeFractionZeroPlayLength();
-    testFramesToFadeFractionFullSpan();
-
-    testFadeFractionToFramesBasic();
-    testFadeFractionToFramesZeroPlayLength();
-    testFadeFractionToFramesRounding();
-
-    testRoundTripNoStartPoint();
-    testRoundTripWithStartPoint();
-    testRoundTripFadeGreaterThanSpan();
-
     if (g_fail == 0) std::printf("trigger_seam: all tests passed\n");
     else std::printf("trigger_seam: %d FAILED\n", g_fail);
     return g_fail == 0 ? 0 : 1;