daniel/reasampler
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Compare commits

base: daniel/reasampler:363c091308e29609834ef0c3d06789a6f842d527
Branches Tags
daniel/reasampler:dev
daniel/reasampler:1.4.0 daniel/reasampler:1.0.0
...
compare: daniel/reasampler:dev
Branches Tags
daniel/reasampler:dev
daniel/reasampler:1.4.0 daniel/reasampler:1.0.0

435 Commits
363c091308 ... dev

Author SHA1 Message Date
daniel 3eae942625 1.7.5 2026-08-06 09:50:21 -04:00
daniel 03f7fb5081 Merge branch 'omega-w3-t3-undo-collapse' into dev 2026-08-06 09:49:22 -04:00
daniel ab14ae769f Guard poll() against a mode-apply mid-flight; two doc corrections 
Extends the OnTimer guard to skip session.poll() itself while modeApplyInProgress(), preventing an undo/redo or project-switch reload from replacing the view model under an in-flight applyMode.
 2026-08-06 05:23:58 -04:00
daniel 2269fd80b6 Close the collapse's two dropped guarantees: latch applyMode against re-entrancy, pin its project once; correct three overclaiming doc lines 2026-08-06 05:07:31 -04:00
daniel 8c06383fe7 Collapse a Design View mode switch to ONE undo point: FX writes run inline in applyMode's block, deferred park queue deleted 2026-08-06 04:32:26 -04:00
daniel 8a7056d19d Fix undo-label misnomer, tighten drain-nesting/abort-path docs, mark inferred undo behavior as unverified 
Renamed the drain's undo point to "Design View FX state" (it restores as often as it parks). Extended the nesting audit to cover a block opening inside the drain's own block. Marked post-fix undo behavior as inference pending DAW checks.
 2026-08-05 20:54:31 -04:00
daniel 13c824c63d Collapse the FX-park drain's writes into one undo point instead of one per TrackFX_SetOffline 2026-08-05 20:40:45 -04:00
daniel bd86ede5b3 Merge FX-park snapshot guard: refuse to park when the pre-park truth is gone 
A snapshot is never taken from a chain a park has touched, on either
half -- flags or per-FX offline. Stranded tracks are refused, named
once in the console, and left recoverable by hand.
 2026-08-05 20:17:00 -04:00
daniel 4b306dd436 Name refused tracks before Undo_EndBlock2, not after; tighten the route-list doc; pin the refusal memo's gate 
Fixes D (handle lifetime), C (ASCII dashes), G (comment compression), I (shouldReport extracted + tested); CLAUDE.md route list corrected per A/B/H. E pushed back -- cross-module GUID plumbing is architectural, not a targeted fix.
 2026-08-05 17:34:49 -04:00
daniel 5376ab085c Extend the park trust test to the FX chain, name the refused tracks, and stop reprinting an unchanged refusal 2026-08-05 17:10:19 -04:00
daniel 67524206fb 2nd Pass Render 2026-08-05 16:21:17 -04:00
daniel 203961f41c Refuse to park a track whose pre-park snapshot is gone, rather than re-snapshotting the already-parked chain as the user's state 2026-08-03 18:30:40 -04:00
daniel 2f96dd3da5 Revert Ω-W2-T4: FX-park state stranded across save/reopen 
Backs out the deferred park drain split. Forced synchronous FX-park
drains return, and with them the mode-switch hitch, until the
re-snapshot-after-discard fix lands.
 2026-08-03 18:05:04 -04:00
daniel 098727e464 Merge panel polish: crosshair arrange-drop cue, Re-capture and Insert Conform to the overflow menu 2026-08-03 17:50:09 -04:00
daniel 0e6a0d3618 fix: use crosshair cursor for arrange-drop cue instead of I-beam 
The I-beam read as a text-editing cursor rather than a timeline placement point.
 2026-08-03 17:49:18 -04:00
daniel 8487833342 Revert "Merge Ω-W2-T4: split the deferred FX-park drain by kind" 
This reverts commit 70bd29dc89, reversing
changes made to 84afd1b545.
 2026-08-03 17:46:17 -04:00
daniel d22446ef7d Move Re-Capture and Insert Conform from the panel top bar to the overflow menu; re-pin action_bar width test to the new 4-button top bar. 2026-08-03 17:44:00 -04:00
daniel 4b19556513 Merge Insert as FX: load ReaSampler 9000 onto the selected track from the panel 
# Conflicts:
#	src/shell/actions/CLAUDE.md
 2026-08-03 16:46:40 -04:00
daniel a5febbd6aa Merge drag-out hand-off fix: keep the drag internal while the pointer is over REAPER 2026-08-03 16:45:14 -04:00
daniel 51c7505dc0 Fix Insert-as-FX review findings: id rename, selection-count drift, refusal tooltip, success msg, master-only, reserve test 
Renames the permanent action id out of the placement family, makes the button's
painted state and pressed outcome share one selection count, surfaces
panel-known refusals in the tooltip, reports the target track on success,
distinguishes a master-only selection, and pins the overflow-reserve test to the
real bar spec.
 2026-08-03 16:43:10 -04:00
daniel b71a05fbef Close the bridged-process hole in the drag-out hand-off gate 
OsHandoff now needs the window-ownership proof AND a hit-test that named
nothing, so a bridged plugin's UI can't read as off-REAPER.
 2026-08-03 16:42:59 -04:00
daniel aa87d81f1f Merge Ω-W2-T5: bound the waveform zero-crossing snap to a pixel radius 
Single-cycle loop marks stop teleporting to the one interior crossing. Ctrl on a
marker drag defeats the snap, and no longer loses the grab to a coincident node.
 2026-08-03 16:09:27 -04:00
daniel 70bd29dc89 Merge Ω-W2-T4: split the deferred FX-park drain by kind 
Restores stay forced before the view model serializes; parks go one FX per idle
tick behind a 1s coalescing debounce, so a rapid A-B-A flip costs no plugin work.
 2026-08-03 16:09:20 -04:00
daniel 84afd1b545 Merge Ω-W2-T2: throttle new-content enumeration off the 30/s timer tick 
Extracts elapsedAtLeast to core/util with the GetTickCount wraparound asserted.
 2026-08-03 16:09:12 -04:00
daniel f91054276b fix(instrument): stop Ctrl-before-click stealing a waveform mark grab from a coincident node 
Ctrl held before mouse-down forced the node/toggle win over a smaller cap or
column regardless of area; now it defers to the ordinary smallest-area
arbitration like a plain click. Also amends product docs, VERIFICATION.md, and
adds sparse-material/narrow-overlay test fixtures.
 2026-08-03 16:07:49 -04:00
daniel fcd1ed022c feat(panel): add Insert as FX — ReaSampler 9000 onto the selected track, preloaded with the focused capture, over the existing instrument-drop body 2026-08-03 16:06:22 -04:00
daniel 9599e96e0c Fix drag-out giving live drags to OLE: prove the pointer left REAPER 
OffReaper leaves the surface vocabulary; OsHandoff now gates on a window-ownership
proof resolved in the shell, so no in-REAPER surface can reach DoDragDrop.
 2026-08-03 15:50:25 -04:00
daniel 761125d0fe view: assert the FX-park coalescing delay's debounce; correct four overclaiming doc/comment claims 
Extracts parkReadyAt/parkIsReady as a tested pure fold per PLAN.md's phase
criterion; the rest is wording fixes — hitch bound, hazard width, forced-drain
scope, progressive CPU reclaim.
 2026-08-03 15:50:07 -04:00
daniel 5042e2709b docs: cascade rulings R2 (band-limiting in scope) and R3 (the Omega snap fence yields) 
R2 closes fork F6 IN: complex waveforms must be supported purely, so band-limited
playback enters the near-term scope alongside the loop-grid recalibration. Re-derives
the three post-R1 reliefs it spends — it reaches process(), reopens a parameter door,
and recontends the deck headroom — and mints F9-F12 for the shape it deliberately
does not rule. R3 makes the snap-radius work Phase Omega's own W2-T5 and supersedes
the zero-crossing-snap criterion at its three sites, recording that W1-T5 met it.
 2026-08-03 15:37:16 -04:00
daniel d5280687f3 docs: record Daniel's static-captures ruling on the wavetable direction 
R1 (2026-08-03) closes F5 — no frame-indexed wavetables yet — deferring W1 with
"yet" preserved as scope rather than rejection, and confirming W3 out. Near-term
scope narrows to W0 alone. Cascades the consequences: F1's threshold amended
(static does not mean one-cycle, so detection classifies nothing now), F2
simplified, F3 and F7 firmed, F8 narrowed to a binary. F6/band-limiting left
open and explicitly not pre-ruled. PLAN.md item 4 updated to match.
 2026-08-03 15:21:03 -04:00
daniel b7b7e88195 fix(instrument): bound the waveform zero-crossing snap to a pixel radius so single-cycle loop marks stop teleporting 
Ctrl during a marker drag defeats the snap outright. nearestZeroCrossing keeps its
unbounded contract; snapToZeroCrossing is the decision a drag applies.
 2026-08-03 15:15:25 -04:00
daniel 59837abd00 docs: register single-cycle-and-wavetable.md in the product-doc list 2026-08-03 15:14:08 -04:00
daniel cca7d1a538 docs: frame the single-cycle / wavetable direction, eight forks open 
Where the instrument's loop grid, crossfade and pitch handling stop making
sense as a capture shrinks toward one cycle, and what "wavetable synth" would
mean here. Two structural results: the pre-seam crossfade is the identity map
at one-period loop lengths, and YIN cannot detect a single cycle, so the period
is declared rather than detected there. Four candidate shapes, W3 recommended
out. PLAN.md gets a pointer under "Flagged for awareness" only.
 2026-08-03 15:08:11 -04:00
daniel 6e2128e937 view: split the deferred FX-park drain by kind — restores stay forced, parks go one FX per idle tick behind a 1s coalescing delay 
A rapid A→B→A flip now costs no plugin work: the restore cancels the still-pending
park outright. A park that has already written one FX carries a `partial` flag and is
superseded by its inverse rather than cancelled, so a half-parked chain is never stranded.
 2026-08-03 15:00:40 -04:00
daniel 32c7e959ae Extract elapsedAtLeast to core/util, dedupe the throttle rationale, and correct the alloc-count/PLAN citations 2026-08-03 14:58:33 -04:00
daniel 170b2e4994 Throttle new-content enumeration to 500ms, off the 30/s OnTimer tick 2026-08-03 14:40:50 -04:00
daniel 1159d364c2 Merge Phase Ω-W1: mode-switch responsiveness and the control surface's second pass 
Five tracks: deferred FX park with honest undo mask and synchronous drain
before persist; narrowed mode-switch persist; master meter on its own 60 FPS
timer with dirty-rect paint; deck reflow with single-button toggles and
click-to-focus overlays; one overlay-to-waveform coordinate mapping.
 2026-08-03 14:33:33 -04:00
daniel 93d6fd0271 Merge Ω-W1-T4: deck reflow, focus-by-click overlay selection, single-button toggles 2026-08-03 14:30:59 -04:00
daniel d16df67eed Merge branch 'omega-w1-t3-meter-rate' into phase-omega 2026-08-03 14:21:44 -04:00
daniel c8e08a7670 Merge branch 'omega-w1-t1-mode-switch-responsiveness' into phase-omega 2026-08-03 14:21:36 -04:00
daniel c9af821eae Merge Ω-W1-T2: narrow the mode switch's persist to the one key it changes 2026-08-03 14:19:09 -04:00
daniel d278c38370 Merge Ω-W1-T5: one overlay↔waveform mapping, loop marks honest about their mode 2026-08-03 14:19:03 -04:00
daniel 78e5f06928 Drain deferred FX parks before the view model is serialized; re-validate track handles per intent; pin the restore-plan round trip 2026-08-03 14:08:28 -04:00
daniel 07b51dcabf Ω-W1-T3 remediation: meter stays live and washed under the curve popup, not frozen 2026-08-03 14:04:14 -04:00
daniel 84905e6bd1 fix(instrument-ui): raise Disabled-cue contrast, fix stale 1.2 MASTER row, close hover/focus minors 2026-08-03 14:04:00 -04:00
daniel 3137c05961 Ω-W1-T5: fix two stale comments in test_waveform_view.cpp (retired proportional-round model; sweep's structural-not-behavioural role) 2026-08-03 14:00:16 -04:00
daniel 73c69f689c fix(instrument-ui): distinguish Disabled from Off, add hover cue to mode toggles, close review minors 
Adds a hairline outline for Disabled chrome buttons, resolves Hover on the four
mode-selector single-buttons, re-measures the control-surface doc's 1.2 layout
table post-reflow, and adds a structural test pinning every enable/mode toggle
to a derived segment.
 2026-08-03 13:43:38 -04:00
daniel 7169d7f22b Clear the park snapshot where the restore is planned, not where it drains; make the drain re-entrant and reload-aware 2026-08-03 13:35:30 -04:00
daniel dd067a192e Ω-W1-T3 review fixes: skip meter invalidate when covered; push fast-path predicates into core 
Fixes the critical finding — Browse/curve-popup no longer trigger 60 Hz
whole-client repaints when the meter is invisible. Pushes the fast-path and
self-containment geometry into master_meter with tests; batches the four minor
findings.
 2026-08-03 13:31:50 -04:00
daniel e714df80f8 Ω-W1-T5 review fixes: unify the drag frame resolve onto frameToX/xToFrame; honest comments on grabbableMarks and the grey-loop-mark contrast trade 2026-08-03 13:26:44 -04:00
daniel 450559f155 deck: filter mod moves to FILTER ENV, cell runs centre in their reserves, two-segment toggles become single buttons, deck focuses its overlay 2026-08-03 13:12:28 -04:00
daniel a3853231a7 Ω-W1-T5: one overlay↔waveform mapping, and loop marks that tell the truth about their mode 2026-08-03 12:39:41 -04:00
daniel 4320bfdb08 Ω-W1-T3: run the master meter on its own 60 FPS timer, and make a meter frame cost one rect 2026-08-03 12:39:36 -04:00
daniel 82a8d51004 Narrow the mode switch's persist to the one key it changes 
A switch wrote all seven ext-state keys to record that view_state moved,
re-serializing the bank book and the tracking ledger for nothing. Both entry
surfaces now take saveViewStateOnly; every other caller keeps the full save.
 2026-08-03 12:39:28 -04:00
daniel a4a1c3860f Defer Design View's per-FX park to an idle tick; honest undo mask, compare-before-write, PreventUIRefresh bracket, O(1) handle resolve 2026-08-03 12:39:22 -04:00
daniel 0eb2c67875 docs: spec Phase Omega — mode-switch responsiveness and the control surface's second pass 
Eight tracks across two waves, from Daniel's seven-item list of 2026-08-03; all
six forks ruled, none open. Amends instrument-control-surface.md 6.3(d) and 6.4,
both reversed by Omega-F2.
 2026-08-03 11:43:28 -04:00
daniel 3376f3eaa1 Merge version bump: ReaSampler 1.6.0 2026-08-02 23:13:16 -04:00
daniel 8c1fccf450 Bump ReaSampler to 1.6.0 
Phase Gamma landed the instrument's master bus, a real time-stretcher, a reflowed deck, and 44 host-automatable VST3 parameters — a user-visible capability increment, which versioning-and-release.md assigns to MINOR.
 2026-08-02 23:12:58 -04:00
daniel cbc4a4c53e docs: give Phase Gamma's DAW obligations a home in VERIFICATION.md 2026-08-02 23:12:51 -04:00
daniel 27712b7573 docs: retire Phase Gamma from PLAN.md; repair stale line/symbol citations across PLAN, the Lambda build-toolchain audit note, and root CLAUDE.md 2026-08-02 22:31:54 -04:00
daniel 2ee984ed16 Merge Phase Gamma: the ReaSampler 9000 instrument grows a master bus, a real time-stretcher, a reflowed deck, and 44 host-automatable parameters 
Four waves, fifteen tracks. dev's Phase E/P work was merged in first and resolved on the branch; this bubble lands the combined tree. In-DAW verification still outstanding.
 2026-08-02 22:14:06 -04:00
daniel 77eb7c6680 Merge dev into phase-g: Phase Ε/Ρ and the 1.5.0 bump meet Phase Gamma's instrument work; 120/120 green 
The per-directory CLAUDE.md count is re-derived at twenty-seven rather than
carried from either side. The "Decouple the instrument reload from VST3
activation" TODO entry does not survive: Γ-W3-T1 landed it, and COMPLETED.md
carries the discharge.
 2026-08-02 21:57:47 -04:00
daniel 53e7d35178 docs: record the bake-prints-limiter track and close Phase Gamma 2026-08-02 21:32:04 -04:00
daniel 3313ac6b96 Merge Γ-W3-T3: the bake prints the limiter through its master stage, with the lookahead compensated so an engaged bake returns the sound the user approved and a bypassed one is byte-for-byte unchanged 2026-08-02 21:24:13 -04:00
daniel a3698972db docs: close three review nits — the build-shape index, a redundant header restatement, and the CMake guard comment 
Bump the product doc's track count and list for T3; trim the header's
pre-limiter restatement now that bake_render.cpp carries it; add limiter
to the extension's not-linked enumeration.
 2026-08-02 21:24:00 -04:00
daniel 0d316b7b9e Print the limiter through the bake's master stage, compensating its lookahead so an engaged bake is the approved sound and a bypassed one is unchanged 2026-08-02 20:57:29 -04:00
daniel b584fa4da9 docs: anchor the product-doc citations to symbols, not line numbers 
Ten more were already pointing at unrelated code. Vendor SDK and SWELL citations left alone — those files don't move.
 2026-08-02 20:46:28 -04:00
daniel 00afa9ba2e docs: anchor the checklist citations to headings and symbols, not line numbers 
Line numbers rot silently. Ten were already broken, including all eight Precision invariants pointers. Vendor citations left alone.
 2026-08-02 20:33:35 -04:00
daniel a9c166b8c2 docs: record Phase Gamma Wave 4's landed track and collapse the wave to it 2026-08-02 20:30:04 -04:00
daniel d3f5e6ec17 Merge Γ-W4-T1: the instrument's 44 automatable parameters under a frozen id table, both VST3 delivery channels serviced, and a stated authority model bounding a lane's authority to the window the model has not caught up on 2026-08-02 20:21:02 -04:00
daniel de34fbafdb Close two defeatable ReleaseProof guards and fix the static-lane skip's dead comparison 
ReleaseProof{} and copy-reuse both compiled under this project's C++17;
user-provided ctor, deleted copy ctor and friend close them. The skip now
compares stored values, not norms, so it actually fires. Abort downgraded
to a debug assert.
 2026-08-02 20:20:48 -04:00
daniel 4c6545e0d3 docs: give Phase Rho's DAW obligations a home in VERIFICATION.md 2026-08-02 20:15:56 -04:00
daniel bd7d6857e5 docs: retire the bake mono collapse and FX-GUID keying entries, file what they left behind 
Both landed with accepted consequences rather than avoided ones, so COMPLETED
carries the identity move and the offline-FX degrade. Two line-ceiling entries
and the DAW-unverified GUID stability are now tracked.
 2026-08-02 20:10:01 -04:00
daniel 430faff230 Merge Design View FX-GUID keying: parked FX-offline state follows the plugin, not the slot 2026-08-02 20:02:53 -04:00
daniel b5a820ed8a Merge the bake's mono collapse: a dead-center resample bake lands one channel, like every other capture 2026-08-02 20:02:47 -04:00
daniel 037707e517 docs: repoint the preamble at COMPLETED.md where the retired sections used to be 2026-08-02 19:58:48 -04:00
daniel 6787e1725c docs: the product-docs index was six files behind, including Epsilon's own spec 2026-08-02 19:52:07 -04:00
daniel 056c60c8e1 Make the automation release's publish-ordering rule a compile-time guard, not an assert 
The assert compiled out under Release's NDEBUG and ran in no test target.
AutomationChannel::release now requires a ReleaseProof that only
publishLiveParams() or noRepublishNeeded() can mint.
 2026-08-02 19:36:32 -04:00
daniel d5ed4f6e53 Split unidentified from missing FX in Design View drop report, fix message + console pop 
Distinguish no-GUID-at-capture from identity-no-longer-live; rewrite the drop
message to state the real recovery step; mark FX-GUID stability [verify — DAW];
guard mismatched fx/fxOffline lengths; the report never force-opens now.
 2026-08-02 18:51:41 -04:00
daniel 90b9d4527c Trim bake_landing comments: one-home the collapse rationale, fix a ragged header wrap 
Also notes why staged.collapsed goes unread at its read site, so a future
reader won't file it as a bug.
 2026-08-02 18:51:38 -04:00
daniel 5f6efb7cc3 Key Design View's parked FX-offline state to the FX's own GUID, not its slot 
view_state v2 writes identities beside the v1 slot array, so a downgrade keeps
what it had. An FX gone at restore time is dropped and reported, never restored
onto whatever took its place.
 2026-08-02 18:31:08 -04:00
daniel 425b9f708c Collapse a dual-mono resample bake to one channel, like every other capture 
prepareLanding takes the shared collapse on the staged buffer before the hash
and the channel-count read, so hash, entry and file all derive from one buffer.
A true-stereo bake stays byte-identical.
 2026-08-02 18:31:05 -04:00
daniel 02319041e3 docs: retire Phases Theta, Xi, Psi and Epsilon from the plan 
All four are landed in full. Their narratives live in COMPLETED.md; the plan now carries only Gamma and Lambda. Cross-references and VERIFICATION.md citations repointed.
 2026-08-02 18:27:54 -04:00
daniel 9b5393098b Close pass four: undetented host curve read, LiveValues guard, ordering assert, static-lane fix, docs 
Points toPlain's exponent arm at the undetented curve map so host reads
match the editor; adds a sizeof guard plus field-poison test for
LiveValues::operator==; skips the model write when an automation value
hasn't moved; corrects five stale doc citations.
 2026-08-02 18:22:21 -04:00
daniel 4231b2321c Merge version bump: ReaSampler 1.5.0 2026-08-02 17:40:40 -04:00
daniel 163c091f55 Bump ReaSampler to 1.5.0 
Retires the 1.4.003 zero-padding experiment; project() and README version banner now agree at 1.5.0.
 2026-08-02 17:40:30 -04:00
daniel beaf527bc6 Merge Phase Ε: the .rsbank bank package — pure codec, filesystem shell, both verbs, and the frozen compatibility corpus 
# Conflicts:
#	docs/COMPLETED.md
 2026-08-02 17:33:44 -04:00
daniel fa69b6c547 docs: record the millisecond floor as located and closed, and split what stayed open 
The retired custom-bounds premise is corrected wherever it was encoded: the tail
bit is the time selection's, not custom bounds'.
 2026-08-02 17:22:20 -04:00
daniel f33ef9af37 docs: give Phase E's DAW obligations a home in VERIFICATION.md 2026-08-02 17:19:57 -04:00
daniel a2ee5ff69d docs: the picker was never a deviation, it was a regex miss in the plan 2026-08-02 17:19:57 -04:00
daniel 24569956cf docs: record Ε-W3 as landed and Phase Ε as complete 2026-08-02 17:19:57 -04:00
daniel c0c56ab2a7 Merge Ε-W3-T1: the frozen package compatibility corpus and the harness over it 2026-08-02 17:19:57 -04:00
daniel b99027bc4c docs: collapse the landed Phase E track specs to Landed form 
Five tracks across W1 and W2 now point at COMPLETED.md. W3 and the phase
header stay live.
 2026-08-02 17:19:57 -04:00
daniel 3fd3214ff8 Remediate Ε-W3-T1 package-compat-fixtures review findings 
Freeze *.rsbank as binary via .gitattributes; add a truncated additive_forward fixture proving the exact-size proof beats TooNew; enumerate the fixture dir to catch orphaned files; make fixture-size checks fatal instead of just logged; pin fixture version asserts as literals, not build-relative.
 2026-08-02 17:19:57 -04:00
daniel 1005c943a2 docs: record Phase E waves 1 and 2 as landed 
Backfills W1, which was skipped when it merged, and adds W2's two verbs.
Notes the picker deviation: GetUserFileName both directions, not the
spec'd Win32/SWELL split.
 2026-08-02 17:19:57 -04:00
daniel 9521b5339f Freeze the package compatibility corpus: real .rsbank bytes proving both ladder directions, every truncation site, and the round trip 2026-08-02 17:19:57 -04:00
daniel 2069ae8086 docs: point the three bumpBankGeneration citations at the right line 
A prior pass corrected session.h:108 to :114, but :114 is the read accessor;
the bump is at :121. Also corrects a module count in the package doc.
 2026-08-02 17:19:57 -04:00
daniel f9b191bd36 Merge Ε-W2: bank export and bank import, both verbs and both panel rows 
Union of two parallel tracks. Both action rows, both menu rows, both link
edges survive; the two package CLAUDE.md files now describe the post-merge
reality rather than either side's pre-merge scope.
 2026-08-02 17:19:57 -04:00
daniel 01481350e6 Merge Ε-W2-T1: the bank export verb, its pure planner, and the .rsbank writer 2026-08-02 17:19:30 -04:00
daniel f8dde16a7e import: remediate review findings — ledger gate, docs, message split 
Delegates the refuse-gate to ledgerDegraded(), lifts its console message into a
pure testable fold, fixes stale doc line citations and an inaccurate outcome-enum
comment, and splits the rename counter into collision-vs-sanitize.
 2026-08-02 17:19:30 -04:00
daniel 33ea95078d docs: add the two package directories to the architecture table 
Also adds the missing core/instrument/engine/loop row and corrects the
per-directory CLAUDE.md count from twenty-three to twenty-six.
 2026-08-02 17:19:30 -04:00
daniel 454f67b3bc Close bank-export review findings: name-cap underflow, double overwrite prompt, test scope 
Clamps insertSuffix's underflow, floors uniqueEntryName's validity guard, suppresses
the redundant overwrite confirm via a picker out-param, adds a PayloadBuffer
high-water mark, and corrects stale CLAUDE.md/CMake claims.
 2026-08-02 17:19:30 -04:00
daniel a927dad2f4 import: a .rsbank lands as a new bank, whole or not at all 
Four collisions answered explicitly: ids reminted, names never overwritten,
content deduped before the write, bank name auto-suffixed. Degraded ledger
refuses before the picker.
 2026-08-02 17:19:30 -04:00
daniel 752d3413f8 Merge Ε-W1-T2: the package filesystem shell, pickers, and rollback journal 2026-08-02 17:19:30 -04:00
daniel 081b6f1028 package: one bank leaves the project as one .rsbank, or the export refuses and says why 
Pure planner classifies missing/unreadable/unrepresentable and repairs transport
names; the verb digests, streams and commits atomically over a const session.
 2026-08-02 17:19:30 -04:00
daniel f87ea3d3d7 Merge Ε-W1-T1: the pure RSBK package format, ladder, and manifest codec 2026-08-02 17:19:30 -04:00
daniel f188846370 docs(package): record known gaps and correct stale claims 
Notes the export verb's overwrite-consent obligation post-append, the append's
extension-divergence behavior, and readFilePayload's 4GiB blind spot; fixes a
stale u8string() reference and marks the 4GiB guard as accepted-unexercised.
 2026-08-02 17:19:29 -04:00
daniel ff65371eb6 Merge Ε-W1-T3: OriginKind::PackageImport for the file-tracking ledger 2026-08-02 17:19:29 -04:00
daniel 181b4f2edb Record parseSlots exemption and fix stale package doc comments 
Documents why parseSlots skips repeat-key rejection, corrects two drifted doc
lines (naming-rule count, Malformed-after-header header validity), and records
two forward obligations for import_plan in CLAUDE.md.
 2026-08-02 17:19:29 -04:00
daniel 655159ceac Close package fs review findings: readRange bounds, picker ext, non-ASCII tests 
Cap readRange's allocation and reject size_t overflow instead of truncating;
re-append .rsbank when the export picker omits it; add cafe coverage for
writeFileExclusive and writeLandedFile; loop write() on EINTR.
 2026-08-02 17:19:29 -04:00
daniel a197ff7d68 docs: fix overclaiming OriginKind comment and trim restated test comments 
Enum comment claimed package-id lookup that no persisted field supports; reworded
to the real distinction. Trimmed CLAUDE.md-duplicated test comments and the header.
 2026-08-02 17:19:29 -04:00
daniel 3909b1072c Close the RSBK name-collision class: ASCII case folding, UTF-8 well-formedness, nested-path traversal 
All three are format-locked and validated on encode and decode. Repeated known
keys now reject at the root and inside an entry rather than last-wins.
 2026-08-02 17:19:29 -04:00
daniel edfd7ead4d Fix the package fs seam: UTF-8 paths, GetUserFileName pickers, exclusive-create landing, rollback arm/disarm 
Both pickers now ride GetUserFileName (mode 0/1); the "no save picker" premise was false.
Landing uses O_EXCL so the create is the existence check, not a TOCTOU pair.
 2026-08-02 17:19:29 -04:00
daniel 35b2a3a151 tracking: append OriginKind::PackageImport as value 5 
An appended field-vocabulary value, so kLedgerVersion stays 2 — pinned by a
test. Unknown kinds still degrade to Unknown with the ledger Loaded.
 2026-08-02 17:19:29 -04:00
daniel 1aebf51938 Relabel post-manifest-parse failure as TooNew; refuse zero-length package entries at encode 
An additively-tagged newer package that fails to parse now reports TooNew (with
writer semver) instead of unactionable Malformed. Format layer also refuses encoding
a zero-length entry, honoring the shell's appendPayload contract; both test-covered.
 2026-08-02 17:19:29 -04:00
daniel 41a3016e63 Land the package filesystem shell: streaming atomic package_io, journaled rollback carve-out, asymmetric platform pickers 2026-08-02 17:19:29 -04:00
daniel e0b4ec2e21 Tighten RSBK package-format validation for review remediation 
Reject NUL/control bytes and Windows-hostile names in entry names, relax
the over-broad ".." substring ban to component-only, close the
trailing-garbage gap on empty manifests, and relocate the package
CMake subdirectory to its ladder home.
 2026-08-02 17:19:29 -04:00
daniel 043558a54d Land src/core/package: the pure RSBK container — format ladder, JSON manifest, framing/layout codec 
Two-integer ladder (formatVersion/minReaderVersion), bare-name-only entries
validated on encode and decode, prefix decode that proves exact file size
without ever reading a payload.
 2026-08-02 17:19:29 -04:00
daniel 1fd38bbd57 Bound the automation hold to the window the model has not caught up on, and make that authority model stated, enforced and tested 2026-08-02 17:16:02 -04:00
daniel 09a9ef838f 1.4.003 (Θ/Ξ/Ψ/Ρ) 2026-08-02 17:14:49 -04:00
daniel ec95aac274 Merge the settled bounds channel: the time selection is the only window REAPER is handed, and the experiment that proved it is gone 2026-08-02 17:09:46 -04:00
daniel 4c7e0507a1 Fix vacuous bounds test and stale/circular comments from the settle 
Replace the self-comparing render-window loop with a genuinely discriminating
floor-vs-exact check; correct two stale claims; mark the Auto/Manual floor-parity
premise as unverified; drop the STARTPOS/ENDPOS comment's circular justification.
 2026-08-02 17:08:11 -04:00
daniel 8331df2e91 Settle the render window on the time selection and delete the experiment that proved it 
The millisecond floor lives in the custom-bounds field, not the engine, so
RENDER_BOUNDSFLAG=2 is now the only bounds mode: the two-position type, the
console verdict and the STARTPOS/ENDPOS drift probe all go. capture.cpp 697 -> 622.
 2026-08-02 16:55:12 -04:00
daniel d85e50c143 Merge render-bounds channel experiment: hand the window over on a switchable channel, and print a verdict that is proof only when no floored model fits 2026-08-02 16:23:51 -04:00
daniel de5654fb6f Service both VST3 parameter channels, and promote pitch key-track and Trigger length so all 44 ids issue 
The SDK's own single-component sample drains inputParameterChanges in
process() and implements setParamNormalized; automation was reading the
GUI channel alone. The audio thread now patches a block it solely owns.
 2026-08-02 16:22:17 -04:00
daniel bcdf97d6c4 Fix render-bounds EXACT verdict: enumerate floored models instead of trusting grid membership 
Grid-ness of an edge was a proxy for "no floor could explain this count," not
the test itself — equal remainders on both edges cancel under a full floor. Now
checks all three floored models directly and corrects the SHORT/LONG
floor-signature docs.
 2026-08-02 16:21:46 -04:00
daniel 5f971e60cd Close three critical review findings on the render-bounds-channel verdict 
Verdict can no longer print a false EXACT on an on-grid end, no longer names a
bounds channel a content-derived render never consulted, and the grid-align doc
premise is corrected without implementing it.
 2026-08-02 15:56:57 -04:00
daniel bfaa0f2614 Report the instrument's automatable parameters to the host under a frozen id table, in signal-flow order, with real units 
42 of 44 ids issued: pitch key-track and Trigger length stay reserved
pending a live path. Master gain reclassified Live — it never reloaded.
 2026-08-02 15:14:16 -04:00
daniel 51b13304ee docs: retire Phase Rho from the plan, record it as landed 2026-08-02 15:04:19 -04:00
daniel b400384a4f Merge Phase Rho: render in place, a track's output to a new sibling with the source parked on the bench 2026-08-02 14:55:11 -04:00
daniel 7c43e55435 docs: make render_bounds_gate bullet destination-aware 
Phase P split Bank-move vs ProjectMedia-leave-in-place behavior in render_bounds_gate.h but missed updating this CLAUDE.md bullet.
 2026-08-02 14:54:58 -04:00
daniel d7e5c59547 Remediate Phase P render-in-place review findings 
Fix the ProjectMedia refusal path's false bank claims and file relocation, an unreachable-undo idiom, and eight comment/doc accuracy issues.
 2026-08-02 14:51:55 -04:00
daniel 5c0f5f1591 Render in place: a track's output to a new sibling, source to the bench 2026-08-02 14:47:59 -04:00
daniel a0fd931dcb Merge render-bounds diagnostics: prove the window at the boundary it crosses, on every tail mode 2026-08-02 14:47:19 -04:00
daniel 0ab4673887 Fix eight review findings on the render-bounds diagnostics 
Corrects a false comment example, fixes two tests that couldn't detect their
own regressions, adds two more read-back checkpoints around Main_OnCommand so
a drift report self-locates, guards a spurious zero-vs-zero coincidence match,
and softens two sentences that overclaimed cause or defect.
 2026-08-02 14:45:42 -04:00
daniel 292d14d14c Prove the render bounds at the boundary they cross, and name a short render whose count is exactly a millisecond-floored window 
No truncation exists on our side of that boundary, so the read-back is the
only evidence available for whether REAPER kept the window — and it fires on
every tail mode, where only None was ever judged.
 2026-08-02 14:28:03 -04:00
daniel c7afa3a80f docs: collapse Phase Gamma Wave 3 to its landed record, open bake-prints-limiter 2026-08-02 14:06:38 -04:00
daniel e87d044042 docs: record Phase Gamma Wave 3's two landed tracks in COMPLETED 2026-08-02 14:06:38 -04:00
daniel 5236c58838 Merge Γ-W3-T1: two categorical deck rows and a double-height MASTER bus deck, an exact filter tie-line at a 1028 row block, and the instrument reload decoupled from VST3 activation 2026-08-02 14:06:38 -04:00
daniel 7c473bce73 Merge Γ-W3-T2: the bake's reset list verified complete by construction, and the limiter's exclusion from the printed master stage recorded 2026-08-02 14:06:38 -04:00
daniel da14509ab5 Restore the bank fold and usage publish to the resume path, guard setActive against repeats, and make the meter fold's bound literal 
The resume also hands back to a full reload when the fold moves the loaded capture's decode source, so the refs table and the audio cannot skew.
 2026-08-02 14:06:37 -04:00
daniel 5c6525fb91 Decouple the instrument reload from VST3 activation, and make the master meter's accumulate exact 2026-08-02 14:02:26 -04:00
daniel 4b0b03d8d5 Fix stale post-widen deck-reflow figures (90/144/1190px) across docs and tests, and split test_deck_groups.cpp's width-budget fixtures into a new file. 2026-08-02 13:59:35 -04:00
daniel b956fe0d5a Commit the limiter's audible state on the click and defer only the host's latency restart 
setInstrumentParams now arms a sticky pending restart that flushLatencyRestart drains from the sync tick; setState and the bake's adopt flush at their own tails.
 2026-08-02 13:59:34 -04:00
daniel 41876674e4 Fix deck-UI review findings: right-anchor MASTER's meter column, correct stale/overclaiming comments, split test_deck_groups.cpp on its commit-tier/overlay seam, and pin two width-ceiling assertions. 2026-08-02 13:56:16 -04:00
daniel df10ddacc2 Widen the deck row block to 1028 so the filter tie-line is exact, and accumulate the meter's block peaks instead of sampling one in 47 2026-08-02 13:56:15 -04:00
daniel 0627398bbb Reflow the deck into two categorical rows plus a double-height MASTER bus deck 
Row membership is now the group's own property, not a wrap outcome. FILTER's Band|Notch moves to its caption slack, which is what makes the sound row fit. MASTER gains the limiter toggle, the output meter and the GR lamp.
 2026-08-02 13:52:33 -04:00
daniel f60c05c042 docs: collapse Phase Gamma Wave 2 to its landed record, and correct five spec claims the implementation disproved 2026-08-02 13:52:32 -04:00
daniel 1490c25250 Close Γ-W3-T2 review remediation: widen the bake-reset test's per-parameter coverage, correct four overclaiming comments, state the stage-time ceiling's disposition, and fix a missing include 
Dials and asserts pitch-env/filter-env/trigEnv fields the sweep previously skipped in both fixtures; no reset behavior changed.
 2026-08-02 13:52:32 -04:00
daniel bf7840020e docs: record Phase Gamma Wave 2's two landed tracks in COMPLETED 2026-08-02 13:52:32 -04:00
daniel e2981e83ee Bake reset: assert the limiter and bake Hold land neutral, prove the loop returns parked, and baseline the render's identity path 
resetAfterBake is unchanged — every value already resets by construction. The render prints master gain but not the limiter, so §3.4's rationale is wrong; the invariant is corrected.
 2026-08-02 13:52:32 -04:00
daniel 782f50c859 Merge Γ-W2-T2: an explicit loop enable, four named marks with grabbable caps, and the crossfade painted where it is heard 2026-08-02 13:52:32 -04:00
daniel d4acb3feb5 Merge Γ-W2-T1: Rate and Pitch compound into one read increment, on a three-state commit predicate and payload v16 2026-08-02 13:52:32 -04:00
daniel 1b4d0e67b7 Loop-crossfade-ux review fixes: parked-drag no longer fakes LOOP OFF, waveform label contrast fixed, hover memoizes its bank read 
Also corrects the cap-area, em-dash, glyph-overhang and heuristic-comment findings noted in review.
 2026-08-02 13:52:32 -04:00
daniel 56bf26d8b6 docs: collapse Phase Gamma Wave 1 to its landed record, and correct T7's superseded status 2026-08-02 13:52:32 -04:00
daniel a7c3c7a828 Loop: an explicit enable, four named marks with grabbable caps, and the crossfade painted where it is actually heard 
hasLoop becomes user-owned with the gestures as shortcuts onto it; no format change. START uses overlay/trace, not accent/primary, which is the waveform's own fill.
 2026-08-02 13:52:32 -04:00
daniel 35ab59d7f9 docs: record Phase Gamma Wave 1's seven landed tracks in COMPLETED, including T6 which never had a plan entry 2026-08-02 13:52:32 -04:00
daniel fefd169d5b Merge Γ-W1-T7 re-review closeout: the cadence math follows the splice jump, and the collapse band is measured rather than assumed 2026-08-02 13:52:32 -04:00
daniel cbe2369037 Bake window: derive it from the rate the voice actually reads at, so a dialled Rate or downward Pitch no longer truncates the file 2026-08-02 13:52:31 -04:00
daniel ef59265e7a Merge Γ-W1-T7 detect findings: the agreement denominator counts probes that carried signal, so an overlapping straddle can no longer turn a two-and-two split into an accept 2026-08-02 13:52:31 -04:00
daniel f1168e16eb Close Γ-W1-T7 re-review: pitch-sync cadence math, floor-model regression check, evidence-count fix, one-home comments 
New cadence-collapse-band test at P=1470 shows PSOLA eliminates the corner rather than regressing it (18.52% -> 0.00%).
 2026-08-02 13:52:31 -04:00
daniel 248f2f3842 PITCH/RATE deck: Rate and Pitch knobs compounded into one read increment, on a three-state commit predicate and payload v16 2026-08-02 13:52:31 -04:00
daniel d35a55ec8e docs: correct the Gamma-W1 track count and table, and name T7 as a Rate prerequisite 2026-08-02 13:52:31 -04:00
daniel 91bd6f51a2 Period detection: silence is not dissent but an absent period is — the agreement denominator is the probes that carried signal 2026-08-02 13:52:31 -04:00
daniel cc4967d21d docs: drop the findings count from T7's open-questions bullet, it drifts as remediation lands 2026-08-02 13:52:31 -04:00
daniel 3e4ba628c3 docs: record Gamma-W1-T7 in PLAN.md, the track that landed without an entry 2026-08-02 13:52:31 -04:00
daniel 048673eb75 Merge Γ-W1-T7: Preserve's splices go pitch-synchronous — the period is detected once at load, over the loop the voice actually plays 2026-08-02 13:52:31 -04:00
daniel e7d7e70201 docs: fix stale Gamma payload-rung numbers in instrument-control-surface (v14/v15 -> v15/v16) 2026-08-02 13:52:31 -04:00
daniel 79189bd316 docs: fix stale v14 limiter rung in shell/instrument/CLAUDE.md to v15 2026-08-02 13:52:31 -04:00
daniel 9228e93750 Preserve's period detection: probes are placed by position, and a sustain loop is the span analysed 2026-08-02 13:50:14 -04:00
daniel 163ab11e05 Handle Psi's ReaperSurface::Count sentinel in decideDropClass — Gamma's exhaustive-switch gate turns it into a hard error on contact 
The sentinel is not a surface, so it breaks to the existing unclassifiable-surface refusal rather than joining a real case label.
 2026-08-02 13:50:14 -04:00
daniel 334022c0f1 Gamma-W1-T7: gate PSOLA's two untested wires, fix the cadence test's contradictory rationale, add a vacuity guard 2026-08-02 13:50:14 -04:00
daniel 38337229d4 docs: correct Γ's payload rungs to v15/v16/v17 after Ξ took v14 
States rung one as spent rather than derivable, so following the instruction
no longer contradicts the stated number — the trap that caused the collision.
 2026-08-02 13:50:14 -04:00
daniel 93230208ff Γ-W1-T7: make Preserve's splices pitch-synchronous — the jump is a whole number of the source's own period, detected once at load 
30 Hz out-of-band energy 15.45% -> 0.00%; the 29 Hz rate-2.0 detune -133 -> +0 cents.
An unknown period keeps the fixed-window geometry bit for bit. The detector cannot
reach process(): sampler_core does not link it.
 2026-08-02 13:50:14 -04:00
daniel f8e57a3cbd Merge Γ-W1-T2: the master bus — limiter, meter publication, and the plugin's first PDC report 2026-08-02 13:50:13 -04:00
daniel 91c1b78d5e Γ-W1-T2: the published GR meter reads the limiter, not the mute 
Retire the effectiveGain blend so the meter's minimum tracks smoothGain's own
reduction against real input, unscaled by the transition mute — a toggle over
quiet material now reads no reduction instead of pinning to 0.
 2026-08-02 13:50:13 -04:00
daniel 6232851c6b Γ-W1-T2: the limiter toggle is a mute, not a crossfade — the ceiling holds across both transitions 
The equal-gain dry/wet blend let a peak through at (1-m) of its level. Now the
fade rides only the limited path and the hard edge lands on silence.
 2026-08-02 13:50:13 -04:00
daniel 0612abbddb Γ-W1-T2 review: one restart funnel, tighter ceiling proof, effective-gain meter 
Fold setLimiterEnabled's restart request into setInstrumentParams so every writer
keeps the host's latency report in sync. Pin the window-sizing identity, drop the
per-sample modulo, tighten the ceiling tolerance, publish the blended gain.
 2026-08-02 13:50:13 -04:00
daniel 3baf4ee50b Γ-W1-T2: the master bus — a true-peak limiter whose ceiling is a theorem, the meter's published half, and the plugin's first PDC report 2026-08-02 13:50:13 -04:00
daniel 4fa021edae Merge Γ-W1-T5: a real Preserve time-stretcher — write rate is duration, tap rate is pitch 2026-08-02 13:47:19 -04:00
daniel 20d86d7900 Merge Γ-W1-T3: staged contour traces draw the curve their exponent defines 2026-08-02 13:47:19 -04:00
daniel abace156a5 Fix inverted splice-cadence test: assert artifact energy, not zero-crossing period 
Zero-crossing counting was anti-correlated with the real defect (splice debris
fools it). Now asserts energy outside the fundamental, with an alignable control,
matching test_preserve_low_frequency.cpp's approach.
 2026-08-02 13:47:19 -04:00
daniel ab3548dced Merge Γ-W1-T1: one taper, one modifier law, the 10 s stage ceiling 2026-08-02 13:47:19 -04:00
daniel f39fb1b145 Γ-W1-T3: staged contour traces draw the curve their exponent defines 
New pure curve_tessellate joins the overlay's node vertices through curveMap,
one sample per pixel column; the knot no longer floats off its own trace.
 2026-08-02 13:47:19 -04:00
daniel ac653aa581 Measure Preserve's splice-alignment geometry on low-frequency material 
A splice can only relocate by [0.75, 1.25]*window, so periods with no multiple
in that interval never phase-align — at 50 ms, f < 16 Hz and 26.7-32 Hz.
Harness runs by hand; too slow to gate.
 2026-08-02 13:47:19 -04:00
daniel 6f39d0137a Merge Γ-W1-T4: the editor floor, the width budget, and the deck row law 2026-08-02 13:47:19 -04:00
daniel a1b42ed1a8 Fix envelope-overlay knot/trace disagreement on odd pixel spans 
Generalize curveMidLevel/curveFromMidLevel to curveLevelAt/curveFromLevelAt at
arbitrary phi; knotVtx and its drag inverse now read the phi a knot's truncated
x actually implies, not always 0.5.
 2026-08-02 13:47:19 -04:00
daniel ae59e9b70d Γ-W1-T5 remediation: narrow the rate-bound claim, fix baseline/measurement provenance, correct §2.4 framing 
Re-derives the splice-cadence inequality and adds a corner probe that FAILS at
P=500 by design, pending a ruling. Names the baseline commit and harness edit,
fixes measurement methodology, corrects the Trigger-AHD/rate coupling framing.
 2026-08-02 13:47:19 -04:00
daniel 748aad3538 Merge Γ-W1-T6: exhaustive-switch gate on pure libraries 2026-08-02 13:47:19 -04:00
daniel ee8a956fbd Γ-W1-T1 review fixes: mode-independent taper rounding, sharper drag-step test, reset-sweep verifies stored fields 
Swap nearbyint for std::round (MXCSR-independent); derive the finest-drag test
from the editor floor, not the knob; verify resets against fields, not norms;
record the spline-point modifier exclusion.
 2026-08-02 13:47:19 -04:00
daniel 589a8e078b Γ-W1-T5: a real Preserve time-stretcher — write rate is duration, tap rate is pitch 
Generalizes the correlation-aligned SOLA delay line so the feed and the shift are
independent rates over one ring. Unity is bit-identical to the shipped read, asserted
against a hash baseline captured pre-change.
 2026-08-02 13:47:19 -04:00
daniel 3eb72d01c4 One taper, one modifier law: extract param_taper, raise the stage ceiling to 10 s, and make the AHDSR schematic axis the taper itself 2026-08-02 13:47:19 -04:00
daniel ae54ca8128 Re-derive the floor-size test fixtures from the constants and move the ceiling to sample_bands.h 2026-08-02 13:47:18 -04:00
daniel 69e2f1d3e3 Promote switch-exhaustiveness diagnostic to an error on pure libraries (MSVC + GCC/Clang) 
MSVC's C4062 is off by default and GCC/Clang's -Wswitch only warns without
-Werror; this repo sets no -Wall/-Werror anywhere. /we4062 and -Werror=switch
now cover both, scoped to pure libraries only.
 2026-08-02 13:47:18 -04:00
daniel abb27f08f2 Raise the editor floor to 1190x680, derived from the deck's declared width budget, and make row membership a property of the group 2026-08-02 13:47:18 -04:00
daniel e589addc54 Merge bake diagnosis soundness: every printed claim backed by an observation, write proof only where evidence crosses the plugin boundary 2026-08-02 13:45:38 -04:00
daniel 1c8709e82d Take the read-back back out of the persist; a write verdict belongs only where evidence crosses the plugin boundary 
Its false gated six undo points, so an unverified byte-equality assumption could have silently removed Ctrl-Z for a bank mutation that landed.
 2026-08-02 13:42:51 -04:00
daniel 25390d5253 Prove every ext-state write by reading the key back, so no guard is constant-true 
SetProjExtState's return describes the whole extname. The persist and the instrument's publish now re-read their key; both refusals can finally fire.
 2026-08-02 13:14:49 -04:00
daniel 2cb0b52884 docs: correct two false claims in the Phase Ε spec 
REAPER's GetUserFileName serves both pickers — the no-save-picker finding was a
regex miss. A new enum value is structural, not additive: BankModel rejects an
out-of-range SourceMode/Tier rather than degrading.
 2026-08-02 12:38:41 -04:00
daniel 0afb885987 Make a bake's Banked landing reachable only through the persist upgrade 
The dedup path claimed it directly, so a key could be answered Ok pointing at an entry a failed persist never wrote. Write-back is now guarded and three-valued, and landing one request split out of the scan pass.
 2026-08-02 12:35:06 -04:00
daniel 1800bd64c3 Prove the bake's answer writes by reading the key back 
SetProjExtState's return covers the whole extname, so it never saw one key. The persist verdict now reaches the report, and a throw mid-write no longer claims the landing left nothing behind.
 2026-08-02 12:00:34 -04:00
daniel 6cabbd0dd4 Fix the bake scan report's unsound absence-as-signal claim 
Gate the summary on any unanswered key and on SetProjExtState's return, print one line per scanned key, and make the undo block stack RAII.
 2026-08-02 08:34:59 -04:00
daniel 2f8e88880e Merge bake-answer diagnosis: five named failure modes and a scan report that says what the landing saw 2026-08-02 08:06:45 -04:00
daniel 4abeace925 Merge capture-bounds diagnosis: empirical tolerance, unmeasurable-render refusal, refused renders kept for inspection 2026-08-02 08:06:35 -04:00
daniel 41ca833b86 bake: make the landing scan say what it saw, so a no-answer names its own cause 
Splits Ignore into unreadable vs not-a-request and counts every verdict; the report prints only when the pass answered nobody, so its absence proves the action never ran.
 2026-08-02 08:00:19 -04:00
daniel 0511d16d4f capture: close batch-quarantine silence, 0-byte asymmetry, and round-two doc overclaims 
Batch captures now name the retained-render folder once instead of nothing; Auto/Manual tail modes refuse a 0-byte render like None does; VERIFICATION.md steps 1-3 no longer invite a false conclusion; docs/comments no longer overclaim.
 2026-08-02 08:00:12 -04:00
daniel ef0da893b5 docs: add Phase Λ (Linux port) to PLAN.md 
Adds the Phase Λ entry: six settled rulings, four open forks, and thirteen tracks across seven waves, from docs/product/linux-readiness.md. Adds the l slug transliteration, and scopes the plan-wide "nothing unanswered" claim, which Λ's open forks break.
 2026-08-02 07:52:57 -04:00
daniel c037aa1cb6 docs: rule Phase Rho's three forks 
Refuse multi-track; result track always Arrange; follow panel tail. Rho-F2 overrides the mode-following framing: explicit Arrange tags on track and item, plus an explicit-tag-wins filter in detectNewContent.
 2026-08-02 07:40:01 -04:00
daniel 734672ba0e docs: scope Phase Λ, the Linux port 
Product doc for the extension + ReaSampler 9000 on Linux, downstream of the two Λ-W1 audits: Daniel's six rulings, seven waves, the non-REAPER-host safety contract, and four open forks.
 2026-08-02 07:26:55 -04:00
daniel 2005f90c66 capture: state the bounds tolerance as empirical, refuse unmeasurable renders, keep refused ones for diagnosis 
The one-frame bound is not provable for a per-edge renderer; the test now shows where it breaks. Refused renders move out of the bank instead of being deleted, so the DAW experiment has something to read.
 2026-08-02 07:23:30 -04:00
daniel 61e90af547 docs: record Phase Ε fork rulings in the plan 
Ε-F1 proprietary RSBK, Ε-F2 new bank with auto-suffix, Ε-F3 refuse on a
degraded ledger. No Ε track is gated now. Also carries Phase Ρ's plan
sections, authored concurrently in this shared checkout.
 2026-08-02 07:06:23 -04:00
daniel 461351ee02 docs: frame Phase Rho — render in place 
Product notes for rendering a track's output to a new sibling track at the exact render position, source parked in Design mode, bank never touched. Framed as a third verb (arrange->arrange), not an exception to capture/placement separation. Three open forks.
 2026-08-02 07:05:33 -04:00
daniel 52394fa08f docs: fold Daniel's three Phase Ε rulings into the product doc 
Ε-F1 proprietary RSBK; Ε-F2 always a new bank with an auto suffix; Ε-F3
refuse import on a degraded ledger.
 2026-08-02 06:58:04 -04:00
daniel 7f3b00a646 fix: bake-answer messages stop asserting causes the classifier can't see 
Rewords Cleared/Unanswered/ForeignRequest to name only observed facts and every live hypothesis instead of picking a winner; adds a guarded answeredOutcome accessor against a future unhandled BakeAnswerKind; folds an unreachable BakeScanKey/Context test state; fixes generation-stamp timing.
 2026-08-02 06:57:08 -04:00
daniel 7f040dd934 Merge Λ-W1-T2: Linux source/runtime portability audit 2026-08-02 06:53:54 -04:00
daniel 47065a19bb Merge Λ-W1-T1: Linux build/toolchain readiness audit 2026-08-02 06:53:51 -04:00
daniel b1726b0ad3 Fix audit citations, counts, and the L2-07/L2-09 mechanisms after code-review verification 2026-08-02 06:39:36 -04:00
daniel f57bf4fb6d docs: fix audit citations — bad line ranges, misattributed evidence, overclaimed severity 
Corrects a false unguarded-include claim, re-scopes hot-path evidence to what's actually linked, replaces a nonexistent Fork-A collision scenario, fixes several miscounted TUs/libraries, re-grades two Fork-B items from Blocker to Major/non-blocker, and adds missing owners/done-conditions.
 2026-08-02 06:39:31 -04:00
daniel 962ab64ef0 bake: name the five ways the extension can fail to answer, and move the landing verdict into a pure, tab-provable classifier 
A no-answer stays a failure; it now says whether the extension never ran the landing, answered a stale generation, spoke a wire this build cannot read, cleared the request, or refused it.
 2026-08-02 06:38:04 -04:00
daniel a91df760cc capture: name the render source in the exact-bounds refusal, and put its one-frame tolerance under test 
The tolerance is unchanged and now derived, not assumed: frameCountFor lands in {floor(L), ceil(L)}, so a non-frame-aligned window can never miss by more than a frame. Naming the source is what tells a self-bounding render from a short one.
 2026-08-02 06:37:40 -04:00
daniel 86c3c7f3b8 docs: spec Phase Ε — bank export/import as a version-tagged package 
Adds docs/product/bank-package.md and the Phase Ε spec in docs/PLAN.md:
three waves, six tracks. Three forks open; Ε-F1 blocks Ε-W1-T1.
 2026-08-02 06:32:07 -04:00
daniel 893455594f docs: audit source/runtime Linux-portability for extension and VST3 instrument 
Two one-line compile blockers, a locale hazard in the persisted number codec, and a cost split showing the extension is nearly there while the instrument editor is a from-scratch X11 job.
 2026-08-02 06:07:28 -04:00
daniel 5455b1047b docs: audit the Linux build/toolchain gap ahead of Phase Λ 2026-08-02 06:07:20 -04:00
daniel 6e937b9c61 docs: add a DAW verification checklist 
Checks for post-1.0 work that no unit test can close, ordered by risk. Each item cites the obligation it discharges.
 2026-08-02 04:32:29 -04:00
daniel 92f0aa209d Merge release 1.4.0 hygiene: AGPL v3 license, version bump, repo cleanup 2026-08-02 04:16:38 -04:00
daniel 19e28b02c3 docs: rewrite README against the landed tree 
Overview, artifacts, prerequisites, platform support, setup, build/test, install, and repo layout, matching current CMake targets and channel support.
 2026-08-02 04:15:41 -04:00
daniel ca43eb76d4 Update CLion project config 2026-08-02 04:10:20 -04:00
daniel 4fca140ace Untrack .idea/ ahead of the public push 
Files stay on disk; the directory is now ignored.
 2026-08-02 04:05:33 -04:00
daniel 573e878cbd Release 1.4.0 hygiene: license, version bump, drop scratch DSP 
Add AGPL v3 LICENSE, bump version to 1.4.0, remove unreferenced non-compiling temp_cortex/ limiter scratch files, and extend .gitignore for .idea/, AGENTS.md, and cmake-build-* dirs.
 2026-08-02 04:04:17 -04:00
daniel 194c2392cf Merge Phase Ψ — the extension trust pass: exact bounds, disjoint solo surfaces, reachable actions, honest drops, real names, true mono 2026-08-01 23:40:32 -04:00
daniel a4aeb4f6ab Merge dev into phase-psi: take Ξ-W3 before Ψ lands 
# Conflicts:
#	docs/COMPLETED.md
#	docs/TODO.md
 2026-08-01 23:39:24 -04:00
daniel 0f870b1337 docs: collapse Phase Ψ's landed track specs, and record Ψ-W3 — the wave a review finding opened 2026-08-01 23:32:25 -04:00
daniel a3a9c91256 docs: record Phase Ψ's seven landed tracks, and that none of them is DAW-verified yet 2026-08-01 23:22:06 -04:00
daniel a21a6176e8 Merge Ψ-W3: refuse every multi-track selected-tracks render, both scopes 2026-08-01 23:01:56 -04:00
daniel 2a9ab65944 Ψ-W3 remediation: fix the verify doc's wrong render source, add missing content checks, soften unverified claims 
Corrected the Render-dialog source name the refusal's evidence depends on, added a by-ear content check and a file-size channel proxy, and stopped two comments from overclaiming.
 2026-08-01 23:01:50 -04:00
daniel f69c4bf6bf Refuse every multi-track selected-tracks render, both scopes; make a failed mono collapse observable 2026-08-01 22:40:54 -04:00
daniel 6e6f4a6a15 Merge Ψ-W2-T2: a bit-identical capture collapses to one lossless mono channel 
# Conflicts:
#	src/shell/capture/CLAUDE.md
#	src/shell/capture/capture.cpp
#	src/shell/capture/capture.h
 2026-08-01 22:23:06 -04:00
daniel 91f3ffb09e Merge Ψ-W2-T1: captures named after their source track, surfaced on the panel card 2026-08-01 22:16:20 -04:00
daniel 8b191e3379 Ψ-W2-T2 remediation: atomic temp+rename collapse write, honest unknown-channel fallback, [verify — DAW] markers, corrected+filed bake-collapse deferral, observable collapse message, quiet-NaN test 2026-08-01 22:08:39 -04:00
daniel 0feb32d59b Ψ-W2-T1 remediation: scrim the card name over the waveform, hedge two SDK claims, fix a UTF-8-truncation empty-label bug, file the legibility DAW deferral 2026-08-01 22:08:35 -04:00
daniel 4fa3c1dd15 Ψ-W2-T2: collapse a capture whose channels are bit-identical to one lossless mono channel, index value measured off the landed file 2026-08-01 21:46:55 -04:00
daniel 3278b4eced Name captures after their source track: label and filename both, on every interactive mint site, and show the name on the panel card 2026-08-01 21:46:53 -04:00
daniel 4bdbbe0517 docs: close Phase Ξ — the popup abandoned by ruling, the bake window derives itself, and Γ's rung ladder shifts to v15 2026-08-01 21:44:05 -04:00
daniel 178cca3c25 Merge Ξ-W3-T1: the bake window derives itself — Hold is the one knob a sustain loop needs, and three truncations are gone 2026-08-01 21:34:10 -04:00
daniel eb6093e085 Close derived-bake-window review findings: NaN-guard remaining wire doubles, pin Trigger-span agreement, retire dead quantizer 
Guards params_payload.cpp's filter-tail seconds and both keyTrack sites against NaN; pins Voice::start's Trigger-span formula against trigger_seam; retires unused shortestDivisionAtLeast.
 2026-08-01 21:32:05 -04:00
daniel 09d64c9f46 Merge Ψ-W1-T1: a ranged item capture renders the window, with children and receives silenced for it 
# Conflicts:
#	docs/TODO.md
#	src/app/CMakeLists.txt
 2026-08-01 21:25:37 -04:00
daniel a0220e8c57 Ψ-W1-T1 second-round remediation: ±1-frame bounds tolerance, self-cleanup a refused render, hedge two unverified render-source inferences 
Loosens the exact-bounds gate against REAPER's edge rounding; deletes the bytes a BoundsMismatch refusal writes, per prune_fs's self-cleanup carve-out.
 2026-08-01 21:18:03 -04:00
daniel 65f6070348 Bake window: derived note lengths carry exact durations, not ladder rungs — a long take is no longer cut at 384 beats 
Hold keeps its picker. Also: one home for the %-fold, duration-ordered Hold travel, and a corrupt tail degrades to absent rather than fabricating one.
 2026-08-01 21:10:38 -04:00
daniel 7dc80e7a4f capture: refuse the multi-track ranged item render, silence the track's children and receives for it, and gate every exact-bounds capture on its frame count 2026-08-01 20:58:33 -04:00
daniel a0f9a23711 Merge Ψ-W1-T4: resolve drop targets per move, not once 
# Conflicts:
#	src/shell/actions/CLAUDE.md
 2026-08-01 20:57:55 -04:00
daniel 1044f5418f Merge Ψ-W1-T3: publish the Media Explorer import into the Media Explorer action section as well as Main 2026-08-01 20:37:30 -04:00
daniel 148d8a9e06 Merge Ψ-W1-T2: disjoint per-mode solo surfaces and a playback-gated mode switch 2026-08-01 20:37:24 -04:00
daniel 19aeb92775 Bake window derives itself: %-knob fold, declick pad, Gate held to exhaustion, preview velocity; Hold is the one knob a loop needs 2026-08-01 20:26:04 -04:00
daniel 9d10f151da Ψ-W1-T4 remediation: gate silent arrange drops, pin surface totality, hedge unverified SDK claims, close comment/exception-safety minors 2026-08-01 20:13:17 -04:00
daniel d589b99705 Ψ-W1-T3 review remediation: soften the double-fire claim to unspecified-by-SDK, mark the unload mirror [verify — DAW], fix stale comment, drop redundant assertions, dedupe hook-partitioning comments, drop what-comment; file the action_registry test-seam deferral. 2026-08-01 20:13:13 -04:00
daniel f2cdf676f3 Ψ-W1-T2 review remediation: solo restore drops on visible-in-target, not parked; N-mode segments read dead when unroutable 
Fixes a hidden-parent solo replay that could silence the mix. Also closes the N-mode segment silent no-op, amends the invariant comment, trims view.cpp under 600 lines, hedges two SDK inferences, drops a dead null-check.
 2026-08-01 20:13:10 -04:00
daniel fe3ac79ab5 Ψ-W1-T4: resolve drop targets per move, not once — every surface gets a defined outcome, a cue, and no silent no-op 2026-08-01 19:43:37 -04:00
daniel 72b870459c Publish the Media Explorer import into REAPER's Media Explorer action section as well as Main — custom_action + hookcommand2, second forever-stable id, one handler. 2026-08-01 19:43:27 -04:00
daniel 9c234c2e6b Ψ-W1-T2: disjoint per-mode solo surfaces and a playback-gated mode switch 
Solo is cached, cleared and replayed per mode on a real switch only; the switch is refused visibly while the transport runs. The footer segment now routes through the activate actions, so a panel switch finally persists.
 2026-08-01 19:43:18 -04:00
daniel 5e3ea6c851 capture: render a ranged item capture time-bounded — the selected-items source can't narrow a window, only a full-extent one uses it 
sourceModeForScope now takes the item extent vs. the requested window. Full-extent item captures and the batch keep the old path unchanged.
 2026-08-01 19:43:06 -04:00
daniel d3894dae6d test: audit the derived bake window end to end — two truncations pinned, Gate's missing hold length demonstrated 2026-08-01 19:38:28 -04:00
daniel 8bf6841f7b docs: spec Phase Ψ — the extension trust pass, seven items across two waves, six tracks, three scheduled invariant amendments 2026-08-01 19:01:01 -04:00
daniel 0a7778b396 docs: close Γ-F7 to signal-flow order and spec real units at the host boundary 
The 44-id table stated in full. Adds the plain-value layer, a per-category
unit/precision table, the one-formatter invariant, a stepCount sweep, and the
filter read-side resolution.
 2026-08-01 18:18:09 -04:00
daniel 9f17df1420 docs: record Ξ-W2-T1, the resample bake chain, and file its two deferrals 2026-08-01 18:11:46 -04:00
daniel 7ecb3aa470 Merge Ξ-W2-T1: the resample bake chain — the instrument renders the dialed sound, the extension banks it, one click re-points and resets 2026-08-01 18:05:06 -04:00
daniel 2fa55658c1 docs: schedule VST3 parameters into Phase Γ 
Automation ships as Γ-W4; the stage ceiling goes to 10 s in W1-T1 ahead of the
one-way door; a new Γ-W3-T2 corrects Ξ's bake reset list. Four waves, ten tracks.
Opens Γ-F7 on parameter order.
 2026-08-01 17:26:18 -04:00
daniel a09e45fc1d Ξ-W2-T1 re-review cleanup: soften ordering claim, bound bake guard fields, dedup gain/play-mode rationale, quiet foreign WrongProject noise 2026-08-01 17:23:00 -04:00
daniel 39c2d1cdb4 Ξ-W2-T1 remediation: print master gain into the bake, derive the window from the dialed sound, reset play mode to Trigger 2026-08-01 17:05:28 -04:00
daniel 256216d670 docs: close Γ-F6 and resequence Phase Γ into three waves 
Dynamic latency ships as ruled; the restart cost is re-attributed to our own
setActive and filed in TODO. The reflow splits canvas (W1-T4) from arrangement
(W3-T1); preserve-time-stretch moves to W1-T5.
 2026-08-01 16:51:04 -04:00
daniel eb777f55e1 docs: spec Phase Γ — the instrument's control surface 
Two-row deck reflow (sound/contour), double-height MASTER with limiter and
meter, PITCH/RATE deck, unit-driven knob law, contour-trace fix, and a
re-approached loop/crossfade UX. Folds rulings Γ-F1..Γ-F5; opens Γ-F6.
 2026-08-01 16:29:32 -04:00
daniel 60308a3655 Ξ-W2-T1: the resample bake chain — instrument renders, extension banks, one click re-points and resets 2026-08-01 16:26:28 -04:00
daniel 6c982cd617 docs: record Θ-W7, the arc-and-spline antialiasing fix, and file the scaled-fallback deferral 2026-08-01 15:18:59 -04:00
daniel 806a3037a3 Merge Θ-W7-T1: analytic AA stroker for arcs, needles, and spline curves — opaque core and angle-independent weight, replacing LICE_Arc and ThickFLine on the editor's radial and curve surfaces 2026-08-01 15:12:07 -04:00
daniel 704b7ef373 fix: enlarge every sub-2px stroker width to 2px, per Daniel's ruling 
Knob track arc, inner-dial needle, and mini velocity-trace all sat below the analytic stroker's opaque-core floor. Raised to 2px; updated visual-design-language.md and core/ui/CLAUDE.md to match; kept the 1px-behavior test, corrected its stale comment.
 2026-08-01 15:11:58 -04:00
daniel 3ad30942a7 temp-cortex limiter dump 2026-08-01 15:09:30 -04:00
daniel 07628a2059 fix: close Θ-W7-T1 round-2 leftovers — NaN guard placement, comment attribution, CLAUDE.md export 
Moves the NaN/Inf finiteness check to addSegment where the UB-causing cast actually happens, makes strokeBounds reject an interior non-finite point instead of swallowing it, corrects a LICE_GetPixel misattribution, and documents rasterRowOffset.
 2026-08-01 13:59:09 -04:00
daniel 3fb77027c6 fix: close Θ-W7-T1 review — scaling guard, opacity claims, two vacuous test fixes 
Guards the stroke blend against LICE_EXT_GET_SCALING, tightens the analytic-stroker's boxes and NaN handling, corrects the opaque-core threshold and inner-dial rationale in the docs, and re-derives two review-flagged tautological tests so they actually fail against the bugs they claim to catch.
 2026-08-01 13:45:43 -04:00
daniel 2e09776342 fix: stroke arcs and splines analytically — opaque core, angle-independent weight 
LICE_Arc never reaches opacity and ThickFLine's width is minor-axis. One
distance-to-polyline coverage mask, blended once, replaces both.
 2026-08-01 13:18:21 -04:00
daniel ae9019465e docs: close out Θ-W6 and Phase Θ, and file two legibility-pass deferrals 2026-08-01 10:36:22 -04:00
daniel 7504eefb59 Merge Θ-W6-T1: editor legibility — bigger knobs and labels, ms time constants, per-ring double-click reset, and an antialiasing pass over every drawn surface 2026-08-01 10:29:00 -04:00
daniel d445cfdae3 test: tighten waveform-collapse and knob-face rect assertions 
Height-3 case pins the halfSpan clamp itself (height-4 passed pre-fix too); dropped the vacuous tall-rect mirror since min() is symmetric and wide already discriminates.
 2026-08-01 10:07:47 -04:00
daniel 47f2a063e7 fix: close five Θ-W6-T1 review minors — headroom figure, knob-face radius, degenerate band clamp 
Aligns inKnobFace's hit radius with computeKnob's draw-side min(w,h) rule and adds a non-square-rect test; clamps halfSpan for degenerate waveform bands with a test; fixes stale docs/comments and annotates an uncommitted perf measurement.
 2026-08-01 10:01:40 -04:00
daniel ca464397b2 fix: restore waveform symmetry about the midline, cut deck_values' link to the bank model, and unit-test the column arithmetic 
The waveform column's vertical extents move to pure component_geometry so the shared
primitive stops being untested; PlaySeconds hoists into a header-only play_seconds target.
 2026-08-01 09:47:07 -04:00
daniel 7f74b11dce feat: legible ReaSampler 9000 editor — bigger knobs, ms time constants, per-ring double-click reset, and an antialiased draw pass 2026-08-01 09:16:30 -04:00
daniel 213ecfafe6 docs: close out Θ-W5, and record two spline-overlay UX deferrals 
Collapse Θ-W5 to wave-level in PLAN.md, append its narrative to COMPLETED.md, fix a stale resolvePlay reference in core/instrument/CLAUDE.md, and file the drag-off-margin and AttackEnd/Origin shadow warts in TODO.md.
 2026-08-01 00:29:40 -04:00
daniel 85cf34f858 Merge Θ-W5-T1: spline EGs — a free-drawn contour alternative to every staged envelope, hard points on the one shared spline, and a deck that redistributes reserved cell width 2026-08-01 00:19:35 -04:00
daniel aedcc6976c fix: pin the waveform arbitration in a testable predicate, close round-4 review minors 
Extracts resolveWaveformClaim (core/instrument/ui/spline_edit) so the shell's node/tab/marker click resolution is unit-tested directly, not just its input geometry; folds the staged-envelope node into it; fixes comment accuracy, a cost regression, and test fidelity issues.
 2026-08-01 00:17:06 -04:00
daniel 757e1585d6 fix: close round-3 review findings — smallest-target-first, residue test fix, extraction 
Waveform overlay now resolves node/tab/marker click collisions by target area instead of check order; residue test now uses a distinguishing fixture; Gate-unavailable-while-drawn logic extracted to one pure helper shared by resolvePlay and applyControl.
 2026-07-31 23:44:05 -04:00
daniel c3d67bc3da fix: close round-2 review findings — Critical silent-note bug plus majors/minors 
Fixes the 2-point spline-EG early-free bug causing silent fade-ins, the pitch/filter enable-toggle Trigger-forcing hole, the contour-node/marker pixel shadow, missing deck-residue test coverage, and stale comments in knob_deck and spline_edit.
 2026-07-31 23:12:08 -04:00
daniel d8ffd860d1 instrument: a deck group's reserved cell width goes to the cells present 
A Trigger face dropping Sustain and Release now gets wider cells instead of
144 px of dead slots. Group widths, row packing and Gate are untouched.
 2026-07-31 22:43:13 -04:00
daniel 1c774226d3 fix: close review findings on spline EGs — engine, codec, and popup/overlay UI grammar 
Live pitch depth, Gate/Spline enable-rule agreement, inert kTrigLength, NaN wire guards, hard-flag-tail corruption no longer wipes the record, RT/cold spline tie-break, retired alt-click, marker-shadow fix, plus new test coverage.
 2026-07-31 22:27:41 -04:00
daniel e44bd42dd9 instrument: spline EGs — hard points on the one shared spline, a drawn contour per envelope beside its staged state, payload v13 2026-07-31 21:33:59 -04:00
daniel f115904e4f docs: close out wave Theta-W4, and defer the deck layout rework to TODO 2026-07-31 20:31:53 -04:00
daniel a32ab4b5b2 Merge pth-w4-t2-velocity-deck-and-bipolar-curves: one VELOCITY deck, bipolar pitch and filter curves multiplying their depth knobs, and a drawn preview glyph 2026-07-31 20:27:56 -04:00
daniel 5e290119c5 instrument: the filter's velocity depth knob returns and multiplies the bipolar curve; the pre-v12 lift is a pure domain re-tag 2026-07-31 20:24:40 -04:00
daniel cfb53aade3 fix: close review findings on the velocity-curve deck and bipolar curves 
Cancels the curve-node drag whenever the popup closes so Esc mid-drag can't alias the amp curve; generalizes CurveTarget routing to one switch; fixes stale/overstated comments; clamps a pre-v12 depth fold; adds deck-inertness and filter-fold test coverage.
 2026-07-31 19:46:37 -04:00
daniel 9d38f87a2d instrument: one VELOCITY deck for all three velocity curves, bipolar and off by default for pitch and filter 
Payload v12 appends the new velocity->pitch curve and folds the retired filter velAmount into its now-bipolar curve, so pre-v12 projects reopen sounding identical. Preview button takes a drawn play triangle.
 2026-07-31 19:15:17 -04:00
daniel 4fecb58c0a docs: close out Theta-W4-T1 into COMPLETED, collapse the T1 spec, and record the frames-not-ms crossfade ruling 2026-07-31 18:33:23 -04:00
daniel 7261f0f6a8 Merge pth-w4-t1-gate-loop-sustain: Gate-mode loop sustain with a crossfaded seam, and the loop handles unshadowed 2026-07-31 18:29:14 -04:00
daniel 3cb22e984d loop: fix the crossfade seam's residual discontinuity, plus six review minors 
Normalizes crossfadeWeight over crossfade-1 so the last rendered frame lands at exactly the incoming tap instead of a residual step; corrects the CLAUDE.md invariant and seam test to match. Shares lerpSource/crossfadedSource/maxCrossfade, fixes stale docs/constants, and clears crossfade on the loop-OFF gesture.
 2026-07-31 17:59:58 -04:00
daniel 0fe4166d7d loop: crossfade the Gate sustain seam, and unshadow the loop handles that made loop points look gone 2026-07-31 17:36:36 -04:00
daniel a90ccd9a00 docs: record the palette rework and retire the overlay-contrast wart it resolved 2026-07-31 16:52:44 -04:00
daniel 1307007b91 Merge palette-darker-teal: deep-teal secondary, an owned spectral mid, and an overlay trace that clears the indicator floor 2026-07-31 16:46:56 -04:00
daniel a19d645a49 palette: enlarge the region title into WCAG large class; repoint the grabbed envelope handle off hue 
Corrects theme.h's large-text thresholds, names accent/secondary's real
binding limiter, and adds compositeOver so the loop-span fill's 2.25:1
under-floor pair is asserted rather than assumed.
 2026-07-31 14:07:01 -04:00
daniel 91f71f92bd palette: give the spectral mid and the envelope trace their own roles 
Decouples the keyboard strip's mid stop from accent/secondary, which the
deep-teal darkening had inverted. Adds overlay/trace (#816AA6), the first
value to clear 3:1 against the waveform. Replaces the frozen-premise test.
 2026-07-31 13:27:20 -04:00
daniel e1e668a521 docs: close out Θ-W3-T2 into COMPLETED, collapse the W3 wave, and record the overlay contrast wart as open 2026-07-31 13:20:33 -04:00
daniel 87754477a7 Merge Θ-W3-T2: one staged-envelope system — per-segment curves, the sustain-less AHD, and one overlay shared by all three envelopes 2026-07-31 13:11:12 -04:00
daniel 04e4f875af instrument: reassign loop-marker role off tertiary, onto secondary 
Loop span/markers and the envelope overlay trace shared tertiary purple in the same
overlay rect. Loop markers now draw secondary; envelope overlay keeps tertiary.
Adds a theme-level distinctness regression guard.
 2026-07-31 12:40:15 -04:00
daniel 03fb471c92 instrument: fix AHD DecayEnd overlay/grab defect, pin flaky curve test, close comment/doc findings 2026-07-31 10:19:45 -04:00
daniel 2fa1405b06 instrument: fix AHD node-tracking/tie-break/live-latch defects and close staged-envelope-curve test gaps 2026-07-31 09:52:17 -04:00
daniel d60ab1524a instrument: latch the note done at the read-head run-off, fit the migrated fades, and lift the curve dial and overlay selection into pure modules 2026-07-31 09:17:04 -04:00
daniel 13e8c5c4d9 instrument: one staged-envelope system — per-segment curves, the sustain-less AHD, and a shared overlay for all three envelopes 
Trigger's fade pair folds into the AHD (and goes live); the release anchors right;
Preserve rings its synthetic tail out instead of cutting it. Payload v10.
 2026-07-31 08:37:57 -04:00
daniel 87d7ceb066 docs: close out Ξ-W1-T1, Ξ-W1-T2 and Θ-W3-T1 into COMPLETED; map the note directory; document the Release build 2026-07-31 07:02:54 -04:00
daniel 98594df878 Merge Θ-W3-T1: live parameter delivery to sounding voices, holding normalized stage position across time edits 2026-07-31 06:44:04 -04:00
daniel 8dc76f4a1f Merge Ξ-W1-T2: the programmed capture-signal model, its domain closed at construction 2026-07-31 06:44:00 -04:00
daniel 60aeda1a3e Merge Ξ-W1-T1: one tracking ledger and one authority behind prune protection and replace-vs-add 2026-07-31 06:43:54 -04:00
daniel efd1e41f46 instrument: narrow the live-param publish lock to its own mutex, off the reload's decode 
Knob-drag publishes no longer block behind a full reload's WAV decode — a dedicated livePublishMutex_ replaces reloadMutex_ for the seqlock's single-writer contract. Also fixes an editor comment overclaim and two doc restatements.
 2026-07-30 21:54:20 -04:00
daniel bbc7dc70bb instrument: snap live params onto a fresh voice, roll a live drag back on capture loss, serialize the seqlock's two writers 2026-07-30 21:39:56 -04:00
daniel 1dade0bfcf instrument: deliver continuous playback params live to sounding voices via a seqlock block, holding normalized stage position across time edits 2026-07-30 21:03:05 -04:00
daniel dddecc5734 note: close out the model — correct an inert mutation claim, retag four non-discriminating assertions, assert Tempo's closure, fix three doc/test accuracy gaps 
No behavior change; verification-record corrections and one static_assert.
 2026-07-30 21:03:02 -04:00
daniel a80eb76c1f note: close every value type's domain at construction, so resolveNote is finite for every constructible input 
Division and OffsetAmount get single normalizing doors and private constructors; fromBpm validates by running the conversions rather than their reciprocal. Readers drop their re-clamps and default labels.
 2026-07-30 20:37:12 -04:00
daniel 6287534454 fix: classify future-version ledgers with changed record shape correctly, not as corrupt 
Version-check now runs on the parseLedger failure path too, so a v3 blob whose record shape actually changed reports FutureVersion instead of Unreadable, avoiding the corrupt-blob "clear it" advice. Also closes the six minor findings.
 2026-07-30 20:25:46 -04:00
daniel d923b352ae fix: harden note-program model against corrupt tempo/division/denomination records 
Reject subnormal BPM that overflows to NaN, normalize Division equality, pin a single out-of-range-denomination interpretation across all readers, flag collapsed capture windows, add offset off-view editors and structural static_asserts, collapse duplicated CLAUDE.md facts.
 2026-07-30 20:11:06 -04:00
daniel 45b87dc2ff tracking: read the ledger's version, not just write it; clear owned on any block; channel-correct prune recovery 2026-07-30 20:11:05 -04:00
daniel 834a6ddcc7 note: land the programmed capture-signal model — division ladder, tempo resolution, anchored offsets, one record and one resolver 2026-07-30 19:44:15 -04:00
daniel 7f70d94228 tracking: one ledger, one authority — prune protection and replace-vs-add answered from the same records, fail-safe on unreadable state 2026-07-30 19:44:11 -04:00
daniel 7bd911d58b docs: spec live-parameter delivery as Theta-W3-T1 
Note-on latching rejected for continuous controls. New serial track ahead of
staged-envelope-curves (renumbered T2); edit-model and mid-stage-rule questions
left open for Daniel. Records two deferred filter follow-ups.
 2026-07-30 18:33:01 -04:00
daniel 413967a205 docs: close out Θ-W2-T1 filter-voice-path into COMPLETED 
Move the landed filter-voice-path track from PLAN.md into COMPLETED.md with full
narrative (quantizer removal, editor floor raise). Mark Θ-W2 fully landed, matching
W1's phrasing; fix a stale forward reference.
 2026-07-30 18:23:42 -04:00
daniel 9b1a49c640 Merge Θ-W2-T1: per-voice filter between pitch and amp, its own deck, continuous corner sweep 2026-07-30 18:19:12 -04:00
daniel 0cfd9b6236 filter: sweep the corner continuously; raise the editor floor to 840x620 
Cutoff-only re-solve (15.5 vs 56.9 ns/frame) makes the unquantized sweep
affordable, replacing the 2048-step mod quantizer. Live-compute parameters
remain blocked on a shell-architecture ruling.
 2026-07-30 18:12:10 -04:00
daniel 39389c1183 fix: guard filter tail NaNs, skip static-filter envelope work, pin stereo filter path, correct stale comments 
Codec fallback for non-finite filter fields, a modAmount==0 early-out in tickFilterCutoff,
new stereo render tests for the dual-mono mirror, and comment/test accuracy fixes flagged
in review (stale deck-width claims, restated invariants, drifted CMake link comments).
 2026-07-30 17:35:45 -04:00
daniel 67215509cb feat: run the per-voice filter between the pitch and amp stages, with its own deck 
Params ride the one parameter set; payload v8 -> v9, off by default.
Deck composition moves to a pure deck_groups module in pitch -> filter -> amp order.
 2026-07-30 15:26:14 -04:00
daniel c9c708a338 docs: record the CMake build-system split in COMPLETED; note the multi-config ctest flag 2026-07-30 12:44:46 -04:00
daniel 4bef71b05a Merge cmake-cleanup: per-directory CMakeLists split, shared target helpers, and one-mechanism core/ linkage 2026-07-30 12:41:56 -04:00
daniel 5420550ff3 fix: correct app CMakeLists comments, drop dead bridge_marshal link edge 2026-07-30 12:40:37 -04:00
daniel 68765da031 build: route every core/ TU into reaper_reasampler through exactly one static-library link edge, never a direct compile 2026-07-30 12:28:39 -04:00
daniel d04045be69 build: split the 1423-line root CMakeLists into per-directory files with shared target helpers 2026-07-30 12:19:18 -04:00
daniel 25c63fb807 docs: close out Θ-W1-T3 and Θ-W2-T2/T3 into COMPLETED; add the filter directory to the architecture map 2026-07-30 11:16:21 -04:00
daniel b9d85161e5 Merge Θ-W2-T3: full-width piano strip with uniform key widths, note tooltips, one toolbar font 2026-07-30 11:09:57 -04:00
daniel 1aea481688 Merge Θ-W1-T3: TPT/SVF filter with HP-BP-LP and HP-notch-LP morph laws and a drive stage 2026-07-30 11:09:44 -04:00
daniel 3cb6b9de21 Fix filter test/doc claims: retracted DF1 limit-cycle rationale, notch-depth overreach, stale drive-branch wording 2026-07-30 11:04:20 -04:00
daniel d2364eb5ac Add an Oberheim-SEM morph law to the SVF filter: HP->notch->LP alongside HP->BP->LP, selected at prepare() time, free on the per-sample path 2026-07-30 11:04:20 -04:00
daniel f12700c997 Filter review fixes: gate softLimit on drive, correct flush/DF1 measurement claims, pin control-law test literals, fix stale bypass state 2026-07-30 11:04:20 -04:00
daniel 902030bfba Rebuild the instrument filter as a TPT/SVF with a continuous HP-BP-LP morph and a configurable drive stage 2026-07-30 11:04:20 -04:00
daniel 7d42d7ed29 Make the high-pass feedback tap a fixed 1/48000 s interval so resonance stops scaling with sample rate; 48k and 44.1k bit-identical 2026-07-30 11:04:20 -04:00
daniel 7af3c0c630 Fix filter DSP click-train flush and finish namespace nesting + test coverage 2026-07-30 11:04:20 -04:00
daniel 78e112d1f9 Port Cortex-M4 resonant filter to a pure vtable-free core/instrument/engine/filter module with 0.1-10 Q and log cutoff 2026-07-30 11:04:20 -04:00
daniel e89568c1a8 Clear stale hover on capture-loss and Alt-delete; derive gutter test via chromeRects 2026-07-30 11:03:41 -04:00
daniel 9812690b96 Fix stale hover latch on drag release, tooltip anchor, border off-by-one; pin gutter golden test, drop DPI framing 2026-07-30 11:03:41 -04:00
daniel ae23ee0882 Rebuild the chrome band: full-width piano strip with uniform key widths, note tooltips, one toolbar font 2026-07-30 11:03:41 -04:00
daniel ea52b14f2a Merge Θ-W2-T2: stacked L/R waveform lanes with a type-enforced full-height overlay contract 2026-07-30 10:59:47 -04:00
daniel dfed1c77bb Fix waveform_view comment accuracy, cut duplicate comments, align xToFrame to OverlayArea 2026-07-30 10:35:27 -04:00
daniel fb12c53522 Type-enforce the waveform overlay contract, narrow waveformLanes to LaneSplit, fix laneCount/cache/path-fallback bugs 2026-07-30 09:35:11 -04:00
daniel 99fab6a4b6 docs: move Θ-W1-T1 and Θ-W1-T2 into COMPLETED with recorded deviations 2026-07-30 09:13:56 -04:00
daniel 2a0d10fab5 Stack L/R waveform lanes in stereo mode, with overlays drawn once at full band height 2026-07-30 09:04:57 -04:00
daniel 81f5861ba4 Merge Θ-W1-T2: fix drag-out audio loss and FX-container drops, re-home ingest 2026-07-30 08:44:49 -04:00
daniel 98c07d768f Merge Θ-W1-T1: retire the zone system, re-seam the engine and Sample face into bands 2026-07-30 08:44:42 -04:00
daniel e304f2b031 Fix embed use-after-free, restore golden fixture + refs tests, drop dead note_entry 2026-07-30 08:01:22 -04:00
daniel 8d4ccbf841 Retire the zone system: one capture = one parameter set, and re-seam the engine and Sample face into bands 2026-07-30 07:15:54 -04:00
daniel c91bf03ef4 Fix drag-drop review findings: unify teardown, gate FX-add on outside-panel, trim comments 2026-07-30 06:56:20 -04:00
daniel 875d5b4632 Fix drag-handoff bugs: gate FX re-resolve on outside-panel, cache unresolvable OS-drag verdict, block double FX-add retry 2026-07-30 00:09:00 -04:00
daniel 0800760833 Fix drag-out losing audio and FX-container drops losing the capture; re-home ingest under shell/actions 2026-07-29 23:49:53 -04:00
daniel cd704cb0ad temp-cortex filter dump 2026-07-29 23:45:20 -04:00
daniel 8c620f88e4 temp-cortex filter dump 2026-07-29 23:36:00 -04:00
daniel a689fb75eb docs: add PLAN.md — post-1.0 roadmap consolidating TODO-1.0's seventeen items 
Two Greek-lettered phases (Θ instrument overhaul, Ξ resample loop): sequenced
waves, parallel tracks on disjoint surfaces, per-track acceptance criteria,
carried-forward open questions, traceability table. TODO-1.0.md retained as
verbatim-provenance appendix.
 2026-07-29 23:09:53 -04:00
daniel be37192fe9 docs: record comment-reduction pass in COMPLETED, add comment conventions to CLAUDE.md 2026-07-29 21:22:37 -04:00
daniel 949dc3af7c Merge comment-reduction: cut source comment volume ~42% tree-wide across 12 tracks 2026-07-29 21:16:52 -04:00
daniel 47ccadf726 Restore review-flagged comment content cut too aggressively in comment reduction 2026-07-29 21:15:00 -04:00
daniel 9d037fb233 Merge 12 comment-reduction tracks: cut source comment volume ~42% tree-wide 2026-07-29 20:49:57 -04:00
daniel 58c6d49261 Cut shell/actions, bank_ops, app comment bloat ~48% (comments only, zero code change) 2026-07-29 20:49:31 -04:00
daniel 8dac5b4a54 Cut core/wire and shell/persist comment bloat ~46% (comments only, zero code change) 2026-07-29 20:49:28 -04:00
daniel 80df142605 Cut core/view and shell/view comment bloat ~65% (comments only, zero code change) 2026-07-29 20:49:26 -04:00
daniel 12ffe377e5 Cut core/capture and core/version comment bloat ~45% (comments only, zero code change) 2026-07-29 20:49:23 -04:00
daniel 65ca1e1f9d Cut core/model, reclaim, json, util comment bloat ~26% (comments only, zero code change) 2026-07-29 20:49:06 -04:00
daniel 3d3415f943 Cut core/ui and core/audio comment bloat ~60% (comments only, zero code change) 2026-07-29 20:49:02 -04:00
daniel 54f5f24506 Cut shell/capture comment bloat ~33% (comments only, zero code change) 2026-07-29 20:48:59 -04:00
daniel cc36dd59c7 Cut shell/panel comment bloat ~47% (comments only, zero code change) 2026-07-29 20:48:56 -04:00
daniel d4d29146c7 Cut shell/instrument comment bloat ~34% (comments only, zero code change) 2026-07-29 20:48:43 -04:00
daniel ccd9968be1 Cut core/instrument/ui comment bloat ~49% (comments only, zero code change) 2026-07-29 20:48:39 -04:00
daniel 354192ae27 Cut core/instrument/map comment bloat ~30% (comments only, zero code change) 2026-07-29 20:48:35 -04:00
daniel 3599d97836 Cut core/instrument/engine comment bloat ~33% (comments only, zero code change) 2026-07-29 20:48:32 -04:00
daniel 85cc340e58 docs: correct FB1 guardrail — r11 did bump ComponentState v7-v8 for masterGainLinear 2026-07-29 15:29:00 -04:00
daniel 1f24c4b095 docs: 1.0 documentation restructure 
Split root CLAUDE.md into 19 per-directory files scoped to their source area.
Roll v0 history into docs/ARCHIVE.md; retire CONTEXT.md, CONTEXT-ARCHIVE.md,
PLAN.md, COMPLETED.md. Move plan docs under docs/. Rescue 9 live deferrals
into docs/TODO.md.
 2026-07-29 15:09:48 -04:00
daniel b34a543b81 Merge bump-1-0-0: version 1.0.0 2026-07-29 14:23:52 -04:00
daniel 1a62e10467 1.0.0 2026-07-29 14:23:44 -04:00
daniel 8a9e2a1194 Merge phase-q: Phase Q — Quality (1.0 structural reorganization) complete 
Q-W0 audit (59 findings, 6 fix-nows incl. linked-lag stereo SOLA) through Q-W6 (OCP registration table). src/ reorganized into core//shell//app with matching sub-namespaces; god-modules split to responsibility seams under the ~600-line ceiling; core/json + core/wire dedupe; deletion authority concentrated in prune_fs; FOREVER-STABLE contract strings byte-identical throughout. 61/61 green.
 2026-07-29 14:09:49 -04:00
daniel f529554673 docs: CLAUDE.md post-Phase-Q architecture refresh — core/shell/app module map, split-TU realities, registration-table mechanism; contract text unchanged 2026-07-29 14:06:56 -04:00
daniel 4d2316b77c docs(phase-q): record Q-W4/Q-W5/Q-W6 landings — all seven waves structurally complete; remaining: DAW verification batch, CLAUDE.md refresh, dev merge 2026-07-29 13:57:44 -04:00
daniel d1202b3174 Merge pq-w6-table: Q-W6 — OCP registration table (adding an action touches one row); bank verbs lifted to shell/bank_ops(Session&); persist.h umbrella, wav_trim shim, and core/namespaces.h all retired; grow-loop rehomed to core/wire; FOREVER-STABLE strings byte-identical; 61/61 green 2026-07-29 13:51:47 -04:00
daniel cd12b97631 Q-W6 review follow-ups: drop stale wav_trim clause, fix stale include comment, idempotent action-table clear, reflow ragged comment, align session.h trailing comments 2026-07-29 13:51:35 -04:00
daniel f3be4d8cce Q-W6: registration table (OCP) in main.cpp; bank verbs -> shell/bank_ops(Session&); persist.h + wav_trim + namespaces.h shims deleted; 61/61 
capture.h realtime seam split to capture_realtime_shell.h; GetProjExtState grow-loop rehomed to core/wire/ext_state_read; stale persist.cpp/bank_panel.cpp comment refs fixed; CLAUDE.md persist/bank_book/actions bullets updated. Command-id suffixes, display phrases, and undo labels byte-identical.
 2026-07-29 13:40:09 -04:00
daniel 4831e0e172 Merge pq-w5-persist: Q-W5 — persist split into session/ext_state_io/prune_fs (deletion authority concentrated); GetProjExtState grow-loop unified in bridge_marshal (T2-04); bank_book_json extraction via private static nameKey; persist.h compat umbrella; 61/61 green 2026-07-29 13:07:32 -04:00
daniel 0c39a716a5 docs: scope deletion-authority wording to bank folder + guard growing-read NUL terminator 2026-07-29 13:06:38 -04:00
daniel 75aa93f913 Q-W5: persist → session/ext_state_io/prune_fs (deletion authority concentrated); one GetProjExtState grow-loop in bridge_marshal (T2-04, ×3 rewired); bank_book JSON codec → bank_book_json via private static nameKey; persist.h stays umbrella. 61/61 green. 2026-07-29 13:06:38 -04:00
daniel bbbb69ee55 Merge pq-w4-actions: Q-W4 — actions.cpp split into design_view_actions/bank_actions/prune_action + action_registry; bank verbs deduped to promptless bankOp* inner verbs in panel_bank_ops; command-ids byte-identical; persistBankOp guards; 61/61 green 2026-07-29 13:06:31 -04:00
daniel 4f587258b2 fix: guard persistBankOp/persistBook against a null session; rename promptText to promptBankName 2026-07-29 13:06:12 -04:00
daniel 430e117620 Q-W4: split actions.cpp into design_view_actions/bank_actions/prune_action + shared action_registry; bank verbs deduped into promptless bankOp* inner verbs in panel_bank_ops (one mutation home, two UX skins); command-id strings byte-identical; actions.h shim carrier retired 2026-07-29 12:56:02 -04:00
daniel 5232227323 docs(phase-q): record Q-W2 + Q-W2v + Q-W3 landings — points to COMPLETED.md; ceiling overages recorded, in-DAW verification marked pending, Q-W4 dedupe-shape notes preserved 2026-07-29 11:43:22 -04:00
daniel 3bcd4dcc7b Merge pq-w3-main: Q-W3 — main.cpp → pointers+entry+dispatch via 4 capture hoists; one pure wav_codec RIFF owner (golden hash pinned); ICaptureBackend deleted; capture_realtime rename + finalize split; stampCaptureSample dedupe; makeUniqueTag monotonic counter; 61/61 green 2026-07-29 11:37:13 -04:00
daniel 6108673c84 Q-W3 rebase fix: hoisted capture TUs include the Q-W2 panel seam headers (panel_bank_ops/panel_input) instead of the deleted bank_panel.h 2026-07-29 11:36:32 -04:00
daniel 8bc5aa1257 Q-W3 review follow-ups: golden hash literal test, CLAUDE.md wav_codec bullet, dead RecordedCapture field comment, makeUniqueTag residual note 2026-07-29 11:33:28 -04:00
daniel 09f7173db2 Q-W3: main.cpp → pointers+entry+dispatch via 4 capture hoists; one pure wav_codec RIFF owner; ICaptureBackend deleted; capture_realtime rename + finalize split; shared stampCaptureSample; makeUniqueTag gains monotonic counter (fixes same-second batch collisions). 60/60 green. 2026-07-29 11:33:28 -04:00
daniel d7d7f7e084 Merge pq-w2v-vst: Q-W2v — VST god-modules split (editor 8 face-axis TUs + pure layout hoist, processor 3 TUs, component_state_io codec — extension drops the voice engine), zone_params.h, core/wire putLE; formats frozen, golden full-blob fixture; 61/61 green 2026-07-29 11:30:25 -04:00
daniel f0f91f7698 Q-W2v review follow-ups: golden full-blob fixture test, dead-local cleanup, bool-guard static_assert, explicit VelocityCurve qualification 2026-07-29 11:29:36 -04:00
daniel ea86f540b8 Q-W2v: split VST god-modules — editor 8 face-axis TUs (+pure layout hoist), processor 3 TUs, component_state_io codec split (extension drops the voice engine), zone_params.h, core/wire putLE; formats frozen, 61/61 green 2026-07-29 11:29:36 -04:00
daniel 9d5783453c Merge pq-w2-panel: Q-W2 — bank_panel.cpp (3459 LOC) split into eight shell/panel TUs, per-seam headers, audition direct call-through preserved; anon-namespace follow-ups; 60/60 green 2026-07-29 11:29:27 -04:00
daniel 19b12186ac Q-W2 review follow-ups: anon-namespace TU-private panel helpers, fix stale bank_panel.cpp comments, correct shim-transitivity claim 
Wraps ~50 file-local helpers across all eight panel TUs in namespace{} (dissolves the menuAppend default-arg ODR trap); zero behavior change, 60/60 green.
 2026-07-29 11:29:10 -04:00
daniel 30a4ffd01b Q-W2: split bank_panel.cpp (3459 LOC) into eight shell/panel TUs — reasampler::panel internals, per-seam public headers, shim retired; zero behavior change, 60/60 green 2026-07-29 11:29:10 -04:00
daniel b5788c82f6 docs(todo-1.0): record second fourth-batch answer round 
Item 16 migration settled (adopt first zone); item 15 capture window specced, reset scope ratified; new item 17: provenance/usage consolidation. Nothing awaits Daniel.
 2026-07-29 11:18:41 -04:00
daniel d8651fb7a7 docs(todo-1.0): item 15 answer round; item 16 retires zone mapping 
Five blocking questions folded; capture-signal popup specced; items 2, 9,
11, 12 carry supersession notes. Sole remaining Daniel-blocker: multi-zone
migration.
 2026-07-29 11:03:17 -04:00
daniel b8e8bb4c75 docs(todo-1.0): item 15 — one-click in-sampler resample (fourth batch, 2026-07-29); five questions await Daniel 2026-07-29 10:39:35 -04:00
daniel 9dd3440b75 docs(phase-q): record Q-W0 close + Q-W1 landing — points moved to COMPLETED.md; skipped riders and bank_book nameKey residual preserved 2026-07-29 09:50:37 -04:00
daniel 0ce3f4894a Merge pq-w1-layout: Q-W1 safe opener — core/json + core/wire + readFileBytes dedup (5 JSON decoders, 3 cursor copies deleted); core/shell/app relocation + sub-namespaces; ui::Rect unification; slot_map split; BankIndex→BankModel; 60/60 green 2026-07-29 09:42:27 -04:00
daniel 2d59bbe35d Q-W1 code-review follow-ups: restore 104 trailing newlines, relocate reasampler_uid.h to core/wire, drop ext_keys namespaces shim, add slot_map_tests, golden serialize literals for 4 modules, namespaces.h/pragma-once ordering sweep. 60/60 green. 2026-07-28 21:34:09 -04:00
daniel 847936f813 Q-W1 pt2: core/shell/app relocation + sub-namespaces; one concrete ui::Rect (LTRB fork retired); slot_map split from bank_book; BankIndex→BankModel; 59/59 green 2026-07-28 21:34:09 -04:00
daniel 67a41728f3 Q-W1 pt1: extract core/json (json::Reader/Writer), collapse wire Cursor family into core/wire, shared readFileBytes — five JSON decoders and three cursor copies deleted, byte-identical formats, 59/59 green 2026-07-28 21:34:09 -04:00
daniel 88e7765ee5 docs(TODO-1.0): filter envelope follows the mode-driven shape; no open questions await a Daniel decision 2026-07-28 20:09:13 -04:00
daniel 32785606d4 docs(TODO-1.0): item 14 — Trigger-mode amp fades replaced by AHD with curves; amp envelope shape follows playback mode 2026-07-28 20:04:59 -04:00
daniel b2013f2056 docs(TODO-1.0): close item 8 — Hold is a share of the post-A+D remainder, so the length bound holds by construction; 1:1 overlay scoped to sustain-less envelopes 2026-07-28 20:00:26 -04:00
daniel 587032ffa4 docs(TODO-1.0): fold second-batch answers — pitch AD becomes AHD, VELOCITY deck supersedes MASTER placement, full-height overlays with linked stereo 2026-07-28 19:49:05 -04:00
daniel 113d268553 docs(TODO-1.0): append second batch (items 4-13) — three bugs, loop-point regression plus Gate loop-sustain spec, and seven UI enhancements 2026-07-28 19:31:58 -04:00
daniel 546927ee43 Merge pq-w0-fixes: six Q-W0 audit fix-nows + review riders — linked-lag stereo SOLA w/ follower self-heal, prime playable-span bound, provenance cursor hardening, rate-derived gain ramp + fade ceiling; 56/56 green 2026-07-28 19:29:15 -04:00
daniel 16b2a1b8ca Q-W0 code-review remediation: pitch_shift follower self-heal, T3-03 rate bail, doc/comment riders 2026-07-28 19:28:48 -04:00
daniel 15d293b42f fix(q-w0): six audit fix-nows — linked-lag stereo SOLA, playable-span prime bound, declick dead-state, provenance cursor hardening, rate-derived gain ramp + fade ceiling 2026-07-28 19:28:48 -04:00
daniel 35f02cece2 docs(TODO-1.0): fold third answer round — spline point ceiling 128, right-click delete; doc fully settled 2026-07-28 19:04:36 -04:00
daniel 678274c19b docs(TODO-1.0): fold second answer round — items 1-2 fully settled, item 3 down to point bounds and popup gesture convergence 2026-07-28 18:59:46 -04:00
daniel 78a214b247 docs(phase-q): fold Q-W0 sign-off into PLAN/CONTEXT — all 59 dispositions settled; Q-W2v wave, T4-18 VST placement, ~600 ceiling + structural heuristics, W3 riders (wav_codec, ICaptureBackend, Q-9) 2026-07-28 18:44:48 -04:00
daniel a4571cc074 docs(TODO-1.0): fold in Daniel's answers — radio none-state, knot curve-drag, Filter ranges/label, dual-state Spline EGs 2026-07-28 18:44:41 -04:00
daniel b06b226182 docs: queue TODO-1.0 — post-1.0 specs for envelope curve dials/overlay radio, MM preamp filter stage, and hard-point Spline EGs 2026-07-28 17:58:19 -04:00
daniel 57e509c64f Merge pq-w0-audit: Q-W0 pre-restructure audit — 4 track notes + committed code-quality audit (59 findings triaged); docs-only 2026-07-28 17:02:47 -04:00
daniel 3eaa0b886e docs(Q-W0): committed code-quality audit — 59 findings triaged, Q-W2v VST wave + Q-W2/Q-W3 reshapes proposed, Daniel decision list for sign-off 2026-07-28 17:00:06 -04:00
daniel 2dbefb8c01 audit(q-w0-t4): sizing census — 14 oversize files, VST side unowned; propose Q-W2v wave, 8-seam bank_panel, ICaptureBackend is dead 2026-07-28 16:50:47 -04:00
daniel ca086f4009 docs(q-w0): T3 env-coupled-constant audit — 7 findings (2 fix-now: gain-ramp step, fade-ceiling frames); persistence surfaces clean 2026-07-28 16:50:38 -04:00
daniel dfe6ccbddd docs(q-w0): T2 architecture audit — wire-cursor hardening drift, 5th JSON decoder, 5x readFileBytes, rect-type zoo; 11 triaged findings 2026-07-28 16:43:34 -04:00
daniel f0d5d23171 docs(q-w0): T1 DSP audit — 11 triaged findings, SOLA engine sound; stereo splice decorrelation is the headline 2026-07-28 16:43:24 -04:00
745 changed files with 111370 additions and 50556 deletions
Expand all files Collapse all files
.gitattributes
+1
View File
@@ -0,0 +1 @@
*.rsbank binary
.gitignore
+3 -1
View File
@@ -1,10 +1,12 @@
/build/
/build-beta/
/.claude/worktrees/
/.idea/ctestState.xml
/.idea/
*.dll
*.dylib
*.so
*.o
*.obj
.DS_Store
/AGENTS.md
cmake-build-*/
.idea/.gitignore
Generated
-10
View File
@@ -1,10 +0,0 @@
# Default ignored files
/shelf/
/workspace.xml
# Editor-based HTTP Client requests
/httpRequests/
# Ignored default folder with query files
/queries/
# Datasource local storage ignored files
/dataSources/
/dataSources.local.xml
.idea/.name
Generated
-1
View File
@@ -1 +0,0 @@
reaper_mpeview
.idea/editor.xml
Generated
-350
View File
@@ -1,350 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<project version="4">
<component name="BackendCodeEditorSettings">
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CDeclarationWithImplicitIntType/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CommentTypo/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=ConstevalIfIsAlwaysConstant/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAbstractClassWithoutSpecifier/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAbstractFinalClass/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAbstractVirtualFunctionCallInCtor/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAccessSpecifierWithNoDeclarations/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppAwaiterTypeIsNotClass/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBooleanIncrementExpression/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatBadCode/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatLegacyCode/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatMixedArgs/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatTooFewArgs/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppBoostFormatTooManyArgs/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCStyleCast/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCVQualifierCanNotBeAppliedToReference/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassCanBeFinal/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassIsIncomplete/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassNeedsConstructorBecauseOfUninitializedMember/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppClassNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCompileTimeConstantCanBeReplacedWithBooleanConstant/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConceptNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConditionalExpressionCanBeSimplified/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConstParameterInDeclaration/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConstValueFunctionReturnType/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppConstexprIfDiscardedBranch/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppCoroutineCallResolveError/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAArrayIndexOutOfBounds/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAConstantConditions/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAConstantFunctionResult/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAConstantParameter/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFADeletedPointer/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAEndlessLoop/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAInfiniteRecursion/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAInvalidatedMemory/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFALocalValueEscapesFunction/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFALocalValueEscapesScope/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFALoopConditionNotUpdated/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAMemoryLeak/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFANotInitializedField/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFANullDereference/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFATimeOver/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnreachableCode/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnreachableFunctionCall/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnreadVariable/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDFAUnusedValue/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclarationHidesLocal/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclarationHidesUncapturedLocal/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclarationSpecifierWithoutDeclarators/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclaratorDisambiguatedAsFunction/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclaratorNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeclaratorUsedBeforeInitialization/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultCaseNotHandledInSwitchStatement/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultInitializationWithNoUserConstructor/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultIsUsedAsIdentifier/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefaultedSpecialMemberFunctionIsImplicitlyDeleted/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDefinitionsOrder/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeletingVoidPointer/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDependentTemplateWithoutTemplateKeyword/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDependentTypeWithoutTypenameKeyword/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeprecatedEntity/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeprecatedOverridenMethod/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDeprecatedRegisterStorageClassSpecifier/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDereferenceOperatorLimitExceeded/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDiscardedPostfixOperatorResult/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDoxygenSyntaxError/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDoxygenUndocumentedParameter/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppDoxygenUnresolvedReference/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEmptyDeclaration/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceCVQualifiersOrder/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceCVQualifiersPlacement/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceDoStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceForStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceFunctionDeclarationStyle/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceIfStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceNestedNamespacesStyle/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceOverridingDestructorStyle/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceOverridingFunctionStyle/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceTypeAliasCodeStyle/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnforceWhileStatementBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEntityAssignedButNoRead/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEntityUsedOnlyInUnevaluatedContext/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEnumeratorNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEqualOperandsInBinaryExpression/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppEvaluationFailure/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppExplicitSpecializationInNonNamespaceScope/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppExpressionWithoutSideEffects/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFinalFunctionInFinalClass/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFinalNonOverridingVirtualFunction/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppForLoopCanBeReplacedWithWhile/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppForwardEnumDeclarationWithoutUnderlyingType/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionDoesntReturnValue/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionIsNotImplemented/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionResultShouldBeUsed/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppFunctionalStyleCast/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppHeaderHasBeenAlreadyIncluded/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppHiddenFunction/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppHidingFunction/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIdenticalOperandsInBinaryExpression/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIfCanBeReplacedByConstexprIf/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppImplicitDefaultConstructorNotAvailable/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIncompatiblePointerConversion/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIncompleteSwitchStatement/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppInconsistentNaming/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppIntegralToPointerConversion/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppInvalidLineContinuation/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppJoinDeclarationAndAssignment/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLambdaCaptureNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLocalVariableMayBeConst/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLocalVariableMightNotBeInitialized/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLocalVariableWithNonTrivialDtorIsNeverUsed/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppLongFloat/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMemberFunctionMayBeConst/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMemberFunctionMayBeStatic/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMemberInitializersOrder/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMismatchedClassTags/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMissingIncludeGuard/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMissingKeywordThrow/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppModulePartitionWithSeveralPartitionUnits/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtAddressOfClassRValue/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtBindingRValueToLvalueReference/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtCopyElisionInCopyInitDeclarator/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtDoubleUserConversionInCopyInit/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtNotInitializedStaticConstLocalVar/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMsExtReinterpretCastFromNullptr/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMultiCharacterLiteral/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMultiCharacterWideLiteral/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMustBePublicVirtualToImplementInterface/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppMutableSpecifierOnReferenceMember/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNoDiscardExpression/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNodiscardFunctionWithoutReturnValue/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonExceptionSafeResourceAcquisition/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonExplicitConversionOperator/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonExplicitConvertingConstructor/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonInlineFunctionDefinitionInHeaderFile/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNonInlineVariableDefinitionInHeaderFile/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppNotAllPathsReturnValue/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppObjectMemberMightNotBeInitialized/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppOutParameterMustBeWritten/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppOverrideWithDifferentVisibility/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterMayBeConst/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterMayBeConstPtrOrRef/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterNamesMismatch/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppParameterNeverUsed/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPassValueParameterByConstReference/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPointerConversionDropsQualifiers/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPointerToIntegralConversion/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPolymorphicClassWithNonVirtualPublicDestructor/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPossiblyErroneousEmptyStatements/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPossiblyUninitializedMember/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPossiblyUnintendedObjectSlicing/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrecompiledHeaderIsNotIncluded/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrecompiledHeaderNotFound/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfBadFormat/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfExtraArg/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfMissedArg/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrintfRiskyFormat/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppPrivateSpecialMemberFunctionIsNotImplemented/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRangeBasedForIncompatibleReference/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedefinitionOfDefaultArgumentInOverrideFunction/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantAccessSpecifier/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantBaseClassAccessSpecifier/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantBaseClassInitializer/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantBooleanExpressionArgument/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantCastExpression/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantComplexityInComparison/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantConditionalExpression/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantConstSpecifier/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantControlFlowJump/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantDereferencingAndTakingAddress/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantElaboratedTypeSpecifier/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantElseKeyword/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantElseKeywordInsideCompoundStatement/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantEmptyDeclaration/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantEmptyStatement/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantExportKeyword/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantFwdClassOrEnumSpecifier/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantInlineSpecifier/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantLambdaParameterList/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantMemberInitializer/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantNamespaceDefinition/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantParentheses/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantQualifier/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantQualifierADL/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantStaticSpecifierOnMemberAllocationFunction/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantStaticSpecifierOnThreadLocalLocalVariable/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantTemplateArguments/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantTemplateKeyword/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantTypenameKeyword/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantVoidArgumentList/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRedundantZeroInitializerInAggregateInitialization/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReferenceToOverriddenVirtualFunction/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReinterpretCastFromVoidPtr/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppRemoveRedundantBraces/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReplaceMemsetWithZeroInitialization/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReplaceTieWithStructuredBinding/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppReturnNoValueInNonVoidFunction/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppSmartPointerVsMakeFunction/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppSomeObjectMembersMightNotBeInitialized/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppSpecialFunctionWithoutNoexceptSpecification/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStaticAssertFailure/@EntryIndexedValue" value="ERROR" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStaticDataMemberInUnnamedStruct/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStaticSpecifierOnAnonymousNamespaceMember/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppStringLiteralToCharPointerConversion/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTabsAreDisallowed/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTemplateArgumentsCanBeDeduced/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTemplateParameterNeverUsed/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTemplateParameterShadowing/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppThrowExpressionCanBeReplacedWithRethrow/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTooWideScope/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTooWideScopeInitStatement/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppTypeAliasNeverUsed/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUninitializedDependentBaseClass/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUninitializedNonStaticDataMember/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnionMemberOfReferenceType/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnmatchedPragmaEndRegionDirective/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnmatchedPragmaRegionDirective/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnnamedNamespaceInHeaderFile/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnnecessaryWhitespace/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnsignedZeroComparison/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUnusedIncludeDirective/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAlgorithmWithCount/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAssociativeContains/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAuto/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseAutoForNumeric/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseDesignatedInitializers/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseElementsView/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseEraseAlgorithm/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseFamiliarTemplateSyntaxForGenericLambdas/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseInternalLinkage/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseRangeAlgorithm/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseStdSize/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseStructuredBinding/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUseTypeTraitAlias/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUserDefinedLiteralSuffixDoesNotStartWithUnderscore/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppUsingResultOfAssignmentAsCondition/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVariableCanBeMadeConstexpr/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVirtualFunctionCallInsideCtor/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVirtualFunctionInFinalClass/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppVolatileParameterInDeclaration/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppWarningDirective/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppWrongIncludesOrder/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppWrongSlashesInIncludeDirective/@EntryIndexedValue" value="HINT" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppZeroConstantCanBeReplacedWithNullptr/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=CppZeroValuedExpressionUsedAsNullPointer/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=IdentifierTypo/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=IfStdIsConstantEvaluatedCanBeReplaced/@EntryIndexedValue" value="SUGGESTION" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=StdIsConstantEvaluatedWillAlwaysEvaluateToConstant/@EntryIndexedValue" value="WARNING" type="string" />
<option name="/Default/CodeInspection/Highlighting/InspectionSeverities/=StringLiteralTypo/@EntryIndexedValue" value="DO_NOT_SHOW" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppClangFormat/EnableClangFormatSupport/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_ARGUMENT/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_BINARY_EXPRESSIONS_CHAIN/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_CALLS_CHAIN/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXPRESSION/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXTENDS_LIST/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_FOR_STMT/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_PARAMETER/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_ARGUMENT/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_PARAMETER/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTIPLE_DECLARATION/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_TERNARY/@EntryValue" value="ALIGN_ALL" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ANONYMOUS_METHOD_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_CLASS_DEFINITION/@EntryValue" value="1" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_DECLARATIONS/@EntryValue" value="0" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DECLARATION/@EntryValue" value="1" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DEFINITION/@EntryValue" value="1" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BREAK_TEMPLATE_DECLARATION/@EntryValue" value="LINE_BREAK" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CASE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CONTINUOUS_LINE_INDENT/@EntryValue" value="Double" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_ACCESS_SPECIFIERS_FROM_CLASS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CASE_FROM_SWITCH/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CLASS_MEMBERS_FROM_ACCESS_SPECIFIERS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_COMMENT/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_SIZE/@EntryValue" value="4" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_STYLE/@EntryValue" value="Space" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INITIALIZER_BRACES/@EntryValue" value="END_OF_LINE_NO_SPACE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INT_ALIGN_EQ/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INVOCABLE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_CODE/@EntryValue" value="2" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_DECLARATIONS/@EntryValue" value="2" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_USER_LINEBREAKS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/LINE_BREAK_AFTER_COLON_IN_MEMBER_INITIALIZER_LISTS/@EntryValue" value="ON_SINGLE_LINE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/MEMBER_INITIALIZER_LIST_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_INDENTATION/@EntryValue" value="All" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/OTHER_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_CATCH_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_ELSE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_NAMESPACE_DEFINITIONS_ON_SAME_LINE/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_WHILE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SIMPLE_BLOCK_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_PARAMS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_COLON/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_SEMICOLON/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_METHOD/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_NESTED_DECLARATOR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_METHOD/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_UNARY_OPERATOR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_COLON/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_SEMICOLON/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_METHOD/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_METHOD/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BETWEEN_CLOSING_ANGLE_BRACKETS_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_ARRAY_ACCESS_BRACKETS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_DECLARATION_PARENTHESES/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_BLOCKS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_METHOD_PARENTHESES/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPECIAL_ELSE_IF_TREATMENT/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TAB_WIDTH/@EntryValue" value="4" type="int" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TYPE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_BINARY_OPSIGN/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_ARGUMENTS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_RPAR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_RPAR/@EntryValue" value="false" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_TERNARY_OPSIGNS/@EntryValue" value="true" type="bool" />
<option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_PARAMETERS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
<option name="/Default/CodeStyle/EditorConfig/EnableClangFormatSupport/@EntryValue" value="false" type="bool" />
</component>
</project>
.idea/material_theme_project_new.xml
Generated
-10
View File
@@ -1,10 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<project version="4">
<component name="MaterialThemeProjectNewConfig">
<option name="metadata">
<MTProjectMetadataState>
<option name="userId" value="-2857a757:19fa27c75be:-7fff" />
</MTProjectMetadataState>
</option>
</component>
</project>
.idea/misc.xml
Generated
-7
View File
@@ -1,7 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<project version="4">
<component name="CMakePythonSetting">
<option name="pythonIntegrationState" value="YES" />
</component>
<component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
</project>
.idea/modules.xml
Generated
-8
View File
@@ -1,8 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<project version="4">
<component name="ProjectModuleManager">
<modules>
<module fileurl="file://$PROJECT_DIR$/.idea/reasampler.iml" filepath="$PROJECT_DIR$/.idea/reasampler.iml" />
</modules>
</component>
</project>
.idea/reasampler.iml
Generated
-2
View File
@@ -1,2 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<module classpath="CIDR" type="CPP_MODULE" version="4" />
.idea/vcs.xml
Generated
-8
View File
@@ -1,8 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<project version="4">
<component name="VcsDirectoryMappings">
<mapping directory="$PROJECT_DIR$" vcs="Git" />
<mapping directory="$PROJECT_DIR$/vendor/WDL" vcs="Git" />
<mapping directory="$PROJECT_DIR$/vendor/reaper-sdk" vcs="Git" />
</component>
</project>
CLAUDE.md
+168 -81
View File
File diff suppressed because one or more lines are too long
CMakeLists.txt
+53 -1174
View File
File diff suppressed because it is too large Load Diff
COMPLETED.md
-2885
View File
File diff suppressed because it is too large Load Diff
CONTEXT-ARCHIVE.md
-1228
View File
File diff suppressed because it is too large Load Diff
CONTEXT.md
-2636
View File
File diff suppressed because it is too large Load Diff
LICENSE
+661
View File
@@ -0,0 +1,661 @@
GNU AFFERO GENERAL PUBLIC LICENSE
Version 3, 19 November 2007
Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU Affero General Public License is a free, copyleft license for
software and other kinds of works, specifically designed to ensure
cooperation with the community in the case of network server software.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
our General Public Licenses are intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
Developers that use our General Public Licenses protect your rights
with two steps: (1) assert copyright on the software, and (2) offer
you this License which gives you legal permission to copy, distribute
and/or modify the software.
A secondary benefit of defending all users' freedom is that
improvements made in alternate versions of the program, if they
receive widespread use, become available for other developers to
incorporate. Many developers of free software are heartened and
encouraged by the resulting cooperation. However, in the case of
software used on network servers, this result may fail to come about.
The GNU General Public License permits making a modified version and
letting the public access it on a server without ever releasing its
source code to the public.
The GNU Affero General Public License is designed specifically to
ensure that, in such cases, the modified source code becomes available
to the community. It requires the operator of a network server to
provide the source code of the modified version running there to the
users of that server. Therefore, public use of a modified version, on
a publicly accessible server, gives the public access to the source
code of the modified version.
An older license, called the Affero General Public License and
published by Affero, was designed to accomplish similar goals. This is
a different license, not a version of the Affero GPL, but Affero has
released a new version of the Affero GPL which permits relicensing under
this license.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU Affero General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Remote Network Interaction; Use with the GNU General Public License.
Notwithstanding any other provision of this License, if you modify the
Program, your modified version must prominently offer all users
interacting with it remotely through a computer network (if your version
supports such interaction) an opportunity to receive the Corresponding
Source of your version by providing access to the Corresponding Source
from a network server at no charge, through some standard or customary
means of facilitating copying of software. This Corresponding Source
shall include the Corresponding Source for any work covered by version 3
of the GNU General Public License that is incorporated pursuant to the
following paragraph.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the work with which it is combined will remain governed by version
3 of the GNU General Public License.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU Affero General Public License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU Affero General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU Affero General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU Affero General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Affero General Public License for more details.
You should have received a copy of the GNU Affero General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If your software can interact with users remotely through a computer
network, you should also make sure that it provides a way for users to
get its source. For example, if your program is a web application, its
interface could display a "Source" link that leads users to an archive
of the code. There are many ways you could offer source, and different
solutions will be better for different programs; see section 13 for the
specific requirements.
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU AGPL, see
<https://www.gnu.org/licenses/>.
PLAN.md
-531
View File
@@ -1,531 +0,0 @@
# PLAN.md — ReaSampler milestone roadmap
Living milestone roadmap for ReaSampler. Derived from CONTEXT.md's 11-step build
order; CONTEXT.md remains the authoritative spec — this file is the tickable
checklist, not a re-statement of the spec. When a point lands, doc-keeper removes
it here and appends it to `COMPLETED.md`.
**Conventions**
- One checkbox `- [ ]` = one discrete, independently-landable point.
- Each milestone opens with a **Goal** (one line) and a **Verify** criterion
(the acceptance gate; precision invariants pulled in where one applies).
- Verify-in-DAW points require a manual REAPER run; pure points are gated by CTest.
- "See CONTEXT.md §…" points at the authoritative detail — do not duplicate it here.
---
## Open questions to resolve during build
Carried from CONTEXT.md §Open questions — keep visible until each is closed by a
landed milestone.
- **`parseInt` narrowing hardening:** `src/bank_model.cpp` `parseInt` casts
`int64_t → int` via `static_cast` without a range check; integers that fit
in int64 but exceed `INT_MAX` are implementation-defined. Hardening candidate
— add bounds check before the cast when integer-field validation is in scope.
- **Capture send/routing isolation (TODO):** The FX-scope capture neutralizes out-of-scope FX, gain, and pan — but NOT aux **sends**. So a downstream coloring send (e.g. a folder → reverb-track send) still routes and blends the reverb into an item/track capture, past the intended isolation point. A true item-level capture should be taken at the isolated graph point — the target scope's output before out-of-scope track FX/gain/pan **and** before out-of-scope aux/parallel sends. The hard part: distinguish **source routing that must be preserved** (e.g. a MIDI send T1→T2 where T2's synth is where a MIDI item's audio is actually produced — the "item level" for that MIDI item is T2's synth output) from **coloring sends that must be excluded** (folder→reverb). Repro: folder F1; T1 (MIDI) sends MIDI to T2 (synth); T1+T2 → F1; F1 sends to reverb T3; capturing the MIDI item on T1 currently includes the reverb, should be isolated to T2's synth output pre-F1 with the MIDI send preserved and the reverb send excluded. Likely approach: snapshot + mute out-of-scope tracks' aux sends during the render while preserving the main/source signal path — needs a rule for which sends are load-bearing.
---
# Phase D2 — Two-canvas (item-level mode projection; additive to D1)
> **Phase D2 is functionally complete** — D2-W1, D2-W2, D2-W3-A, D2-W3-B all landed; see `COMPLETED.md`.
>
> **Deferred:** panel UI indicator for per-track lane/mode state (a per-track
> lane-split marker). The mode switch already shows the active mode; no natural
> cheap home for a per-track indicator was found in the bank panel. Explicitly
> deferred — not silently dropped. Can be picked up later if wanted.
---
# Phase S — MIDI-playback instrument (native VST3 sampler; a second build artifact)
> **Landed on dev (merged 2026-07-27); DAW verification pending Daniel's smoke test.**
> S1–S18 and the product-name/binary-rename work are all on dev. The cross-artifact
> ingest relay (S13 bullet) was explicitly DEGRADED and remains deferred — see below.
> Completed material archived in `COMPLETED.md`. Authoritative spec: **CONTEXT.md
> §MIDI-playback instrument — additive phase spec (Phase S)**. Product framing:
> `docs/product/midi-playback.md`.
>
## S13 — cross-artifact ingest relay (deferred)
> **SPIKE VERDICT (ps-w12, 2026-07-27): DEGRADED — relay deferred.** The instrument's
> REAPER bridge (`reaper_bridge`) is deliberately READ-ONLY; a relay would need a new
> instrument WRITE seam into ext-state and an extension-side timer poller servicing a
> drop-ingest inbox key with a claim/clear nonce — the same cross-process handshake race
> the S17 spec rejected for alternative (A). Both the read-only-instrument boundary and
> the new poller are load-bearing design calls, so the relay is deferred to a future wave.
> The shipped ingest gesture stays drop-onto-docked-panel (S8). The degrade path (editor
> shows a "drop files onto the ReaSampler bank panel to add them" affordance) landed as
> part of Phase S. See `COMPLETED.md` §S13 for full context.
- [ ] Cross-artifact ingest relay: the editor hands the dropped path + this instance's
identity to the extension as a bank-ingest request over an agreed seam. DEFERRED —
relay mechanism proved load-bearing to redesign; drop-onto-panel (S8) is the shipped
ingest path. Requires (a) a new instrument WRITE seam into ext-state and (b) an
extension-side timer poller + claim/clear nonce. A future wave when the design is ready.
## Phase S — product name (ReaSampler 9000)
The MIDI-playback instrument's product name is **ReaSampler 9000** (Daniel, 2026-07-26,
on DAW-testing the S1–S6 instrument). The extension remains **ReaSampler**; the instrument
is **ReaSampler 9000**. Framing + propagation surfaces:
`docs/product/midi-playback.md` §Product name.
- [ ] **Compat verification (must-DAW-verify before shipping the rename):** the working
assumption is that REAPER **rebinds a saved instance by its VST3 class UID, not by the
module filename**, so a filename rename with an unchanged UID keeps saved projects working
(existing instances still resolve). **This is not yet confirmed from source** — a web
check surfaced a JUCE/VST3-replace-VST2 case suggesting REAPER's binding is more nuanced
than "UID only" (it can involve an FXID match), so treat UID-rebind as **to-verify, not
asserted fact**. **DAW-verify:** save a project with a ReaSampler 9000 instance under the
old filename, rename the module, reopen — confirm the instance rebinds and restores its
state. If REAPER does key partly on filename, fall back to keeping the current filename
(display-strings-only) and record that as the shipped choice.
## Phase S — held and optional-forever (noted, not specified)
- **Tier 2 — "expressive" (HELD).** Velocity layers, round-robin (anti-machine-gun),
full ADSR, per-sample tuning/gain trim, sustain loops. The next depth increment once
Tier 0–1 proves the instrument belongs — **its points are not drawn up here.**
- **Tier 3 — "instrument polish" (optional-forever).** Filters, filter/pitch
envelopes, LFOs, per-voice pan, choke groups, a modest FX slot. A direction to leave
room for, never a commitment. **Note:** S16 lands the *pitch* envelope + the Varispeed/
Preserve pitch-engine mode early (Daniel's directive) — the Tier-3 "filter/pitch envelopes"
line now means the *filter* envelope + LFOs remainder.
- **Sinc Varispeed-quality upgrade (HELD — WDL_Resampler).** `WDL_Resampler`'s sinc mode
beats the core's 2-point linear interp for **Varispeed** base-repitch quality (see the S16
WDL finding). An optional per-voice quality toggle (linear default / sinc), RT-suitable but
heavier. Held as a Tier-2/3 quality option — not needed for S15/S16, not scheduled. (A
resampler couples duration, so it is a Varispeed-quality option only, **not** a Preserve
engine.)
- **WDL_SimplePitchShifter swap (HELD — fork S16-F2 route a).** `WDL_SimplePitchShifter`
as a drop-in swap for the `pitch_shift` pure module if the hand-rolled OLA onset latency
or warble proves musically unacceptable. Same `PitchEngine::Preserve` contract behind the
seam. WDL excluded from the shipped build by include-chain (windows.h); held as the
quality/latency alternative.
- **Trigger choke-on-note-off (HELD — fork S15-F1).** A future option for Trigger mode to
*cut* (choke) on note-off or on a same-group re-trigger (hi-hat open/closed). Deliberately
out of S15 scope (Trigger ignores note-off entirely there); a Tier-3 choke-group direction.
## Phase S — editor view-model redesign (three views: Sample / Browse / Zone)
> **Additive Phase S sub-phase (S-VIEW; Daniel, 2026-07-27, r9).** Re-partitions the ReaSampler
> 9000 editor from a two-view toggle into a **three-view model where the loaded sample is the
> home** — Sample (default face), Browse (modal picker over Sample), Zone (dedicated keymap
> surface). Adds three performance parameters (key-tracking, preview velocity, and the r10
> velocity→amp transfer curve) and three visual components (envelope overlay, real piano-key
> pattern, and the r10 velocity-curve editor), and frames two engineering prerequisites
> (drop-to-FX bug, default window size). An **editor** redesign — the S3 voice engine, keymap
> resolution, and read-only-over-bank contract are **unchanged**; component state extends
> additively for key-tracking; VST3 class UID unchanged. Authoritative spec: **CONTEXT.md §Phase
> S — editor view-model redesign (S-VIEW)**. Product framing: `docs/product/midi-playback.md`
> §Addendum r9. When a point lands, doc-keeper moves it to `COMPLETED.md`.
>
> **Depends on Phase S being on dev** (this redesigns Phase S editor shells —
> `reasampler_editor.cpp` + the pure `src/vst/` geometry modules). **Phase L L3 is FINISHED and
> merged** (2026-07-27, commit `c53683e` — `reasampler_editor.cpp` + `reasampler_embed.cpp`
> restyled through the L1 kit). S-VIEW builds the new three-view layout **directly on the current
> L3 look-and-feel as its baseline — one implementation pass, styled correctly from the start.**
> There is **no two-pass "land S-VIEW then restyle through L3"** — L3 already happened; every new
> S-VIEW surface (Sample face, Browse modal, Zone surface, envelope overlay + node handles,
> piano-key strip, preview cluster) is drawn through the L1 kit at build time, inheriting the L3
> palette and component-draw grammar. Restyle-after is not a concern.
**Goal:** A three-view editor that makes "pick a capture, tune it, play it" fast, easy, and fun —
Sample is home, Browse is an easy-to-summon modal picker, Zone is the deliberate keymap surface.
**Verify (in DAW):** open on a 1080p screen → full Sample face (hero waveform + envelope overlay +
fenced root + preview-trigger + control strip) with no scroll; Browse opens as a modal over
Sample, select+confirm loads a new capture; Zone opens on its own button, key-tracking + the
piano-key pattern work; drop-a-capture-onto-FX instantiates a playing instance.
### Phase S editor Wave B — Sample-face recomposition (r11; Daniel, 2026-07-27)
> Daniel's post-landing DAW pass on the S-VIEW editor: **all linear sliders → small radial
> knobs** grouped into a fenced knob deck (envelope controls grouped as a unit); the **mode
> toggles compact**, not full-width; the **inline velocity-curve box → a miniature curve
> preview button + full-size popup editor** (right-click deletes a node in the popup); the
> **hero waveform full-width**. Authoritative layout spec: **CONTEXT.md §S-VIEW → "The
> Sample-face recomposition (r11)"** (band order, group taxonomy, cell metrics, popup
> geometry, inventory contract — nothing silently dropped). Product framing:
> `docs/product/midi-playback.md` §Addendum r11. All drawing through the L1 kit; all
> layout/hit-test in pure geometry modules.
>
> **S-VIEW-11, S-VIEW-12, and S-VIEW-13 have all landed** — FB1 (merged 2026-07-27, suite
> 55/55) brought the knob deck + master gain + curve popup + full-width hero; FB2 (merged
> 2026-07-28, suite 55/55) brought Zone-panel parity. **Phase S editor Wave B (r11) is
> complete.** See `COMPLETED.md` for both FB entries.
**Open forks** — **R11-F1** (hero height vs. default window) SETTLED at FB1 build: elastic
hero, 840×620 default kept. **R11-F2** (Zone-panel parity) SETTLED at FB2 build: knob deck
+ curve popup adopted on the Zone panel; `param_slider` slider rows retired on that surface.
### Phase S editor redesign — forks (Daniel's to call)
*(r9/r10 forks all settled: S-VIEW-F1 and S-VIEW-F2 SETTLED 2026-07-27 — folded into S-VIEW-4 /
S-VIEW-3. F1: preview velocity persists via envelope-v6 `ComponentState`. F2: envelope nodes are
draggable via the pure `envelope_edit` module. R10-F1 SETTLED 2026-07-27 — Option A flat y=1,
folded into S-VIEW-9. S-VIEW-F3 SETTLED — full-window overlay, implemented as Browse renders as a
full-window modal over Sample (landed in S-VIEW-1/S-VIEW-5). **r11 forks all settled: R11-F1
SETTLED at FB1 build (elastic hero, 840×620 default kept); R11-F2 SETTLED at FB2 build (Zone
panel adopts knob deck + curve popup, `param_slider` slider rows retired on that surface).**)*
---
# Phase Q — Quality (structural reorganization; zero-runtime-cost)
> **New pillar, own lettered namespace, and — uniquely — the LAST structural pillar.** Phase
> Q is a **pure structural refactor**: it reorganizes `src/` into a healthier shape (more
> encapsulation, granular namespaces, `core/`/`shell/`/`app/` subdirectories) against a stated
> quality bar — *"mtytel Vital is my code reference for quality"* — to bring the codebase
> "into the realm of something I can stand to look at." It ships **no feature and changes no
> behavior**: the test suite passing unchanged is the proof of correctness. Namespaced **`Q`
> (Quality)** — M/D/B/R/V/S/L are all taken; `Q` names the *end* (the quality bar), the reorg
> being the *means*. Authoritative spec: **CONTEXT.md §Phase Q — structural reorganization
> (reorg spec)**. Product framing, the Vital-grounded target shape, the grep-verified SOLID
> audit that is the evidence base, and the settled/recommended fork record (Q-1..Q-6):
> `docs/product/code-organization.md`. When a point lands, doc-keeper moves it to
> `COMPLETED.md`.
>
> **THE GATE (load-bearing — state first; reconciled to reality 2026-07-27).** Phase Q is
> **gated on the tree being otherwise quiescent.** Daniel's plain readiness target: **"when
> Phase S and L3 are finished."** **As of 2026-07-27 both gate conditions are satisfied:**
> Phase S merged to dev (2026-07-27); Phase L L3 (the VST restyle) merged to dev
> (2026-07-27, commit `c53683e`) — **Phase L is complete** (L1/L2/L3/L4/L5/L6/L7 all
> landed, see `COMPLETED.md`). **D2** is functionally complete (D2-W1..W3-B landed; the
> lone open item, a per-track lane-split panel indicator, is *explicitly deferred*, not a
> blocking residual). **M9** (slots) is **abandoned** (Daniel, 2026-07-27) — will not be
> built. D2 is named in the gate only so that *reactivating* its deferred panel indicator
> re-arms the quiescence condition; neither D2 nor M9 blocks the gate today. *Why the gate:* Phase Q
> touches **nearly every file in `src/`** (relocate into subdirectories, re-namespace every
> header, split the four largest TUs, plus the §2b renames). Every large in-flight branch
> (Phase S on its worktree, and L3 once it lands) is diffed against the *current flat
> layout*; landing a rename-and-relocate-everything reorg mid-flight forces every open
> branch through the worst conflict class (every hunk moved, every qualified reference
> changed) — a combinatorial re-resolution, not a linear one. Phase Q is *last* precisely
> because it reshapes the ground every other pillar stands on. Landing it early taxes every
> subsequent phase; landing it last taxes nothing. **The gate is now satisfied — Phase Q
> may begin, entering at the Q-W0 audit wave** (the structural waves Q-W1+ do not begin until
> Q-W0's triage closes and Daniel signs off — see the Q-W0 sub-gate above).
>
> **M9 disposition — resolved (Daniel, 2026-07-27): abandoned.** M9 is out; it will not be
> reactivated. The gate remains satisfied; no re-arm condition applies.
>
> **PRE-RESTRUCTURE AUDIT WAVE (Q-W0 — added 2026-07-27, Daniel's ask; runs FIRST).** Before any
> structural point (Q-W1+) begins, Phase Q now opens with a **functional + DSP quality audit**
> (`Q-W0`) — a thorough static analysis of the code from a *functional-correctness* and
> *algorithm-quality* point of view, complementary to (not a repeat of) the grep-verified
> SOLID/naming audit that already grounds Q-W1..Q-W6. Q-W0 hunts DSP smells (close eye on the pitch
> engine), reinvented wheels, duplicate code, poor-quality algorithms, leaky pure/shell boundaries,
> and domain-modeling smells around env-coupled constants; it produces a written, triaged findings
> report. **The gate to begin Q-W1 is that Q-W0's triage is complete and Daniel has signed off on
> each finding's disposition** (fix-now vs. document-and-defer). Q-W0's findings may add or reshape
> downstream Q-W1..Q-W6 points; fixes that Q-W0 classifies fix-now are remediated in Q-W0 (or folded
> into the wave that already touches the file), **not** deferred silently into the structural waves.
>
> **Settled (Q-1, this-doc):** the phase is **`Q` (Quality)**; point-id family `Q1..Qn`, wave
> prefixes `Q-W0` (the pre-restructure audit) then `Q-W1..Q-W6` (the structural reorg).
> **Settled (Q-10/Q-11, Daniel 2026-07-27):** Q-10 audit-report home = a **committed doc**
> (`docs/product/code-quality-audit.md`, not a tracked issue list); Q-11 pitch-remediation depth =
> **defer to findings** (default document-and-defer; weigh a bounded OLA fix before a technique
> replacement; a technique replacement is a Daniel decision at triage time, not an automatic Q-W0
> action).
> **Recommended, Daniel's to call (Q-2..Q-9, see
> `docs/product/code-organization.md` §6):** Q-2 JSON extraction in scope + first (rec: yes);
> Q-3 directory shape `core/`/`shell/`/`app/` top-split with subsystem dirs beneath (rec: this
> over pure-Vital subsystem-first — it makes the pure/shell invariant *structural*); Q-4
> sub-namespace to match sub-directory (rec: both); Q-5 split god-modules to the audit's named
> seams, no finer (rec: yes); Q-6 OCP registration-table as the final wave (rec: in, last);
> **Q-7 naming rides the relocation waves, no dedicated naming wave (rec: yes — forced once
> Q-3/Q-4 settle); Q-8 class/module renames — fix the two that actively mislead (`BankIndex`→
> `BankModel`; the JSON `Parser`→`json::Reader`/`Writer`), leave the merely-quirky (rec);
> Q-9 align the `capture_realtime`/`realtime_record` shell↔core word order during W3 (rec: yes).**
>
> **HARD CONSTRAINT — performance (see CONTEXT.md §Phase Q, `docs/product/code-organization.md`
> §3).** The reorg must cost **zero runtime.** On the three hot paths — `peaks` envelope
> compute, audition/preview, the realtime-capture tick — **no added virtual dispatch, no
> header→TU indirection, no changed call/inline or branch shape.** `computeEnvelope` stays a
> free function on `const std::vector<float>&`; audition split stays a direct call-through;
> the realtime idle tick stays a single pointer test; `FxBypassGuard` stays stack RAII. This is
> an acceptance criterion on every point: *a split that would add a hot-path indirection is out
> of scope — rework it or drop it.*
>
> **NAMING dimension (added 2026-07-27; grep-verified audit in `docs/product/code-organization.md`
> §2b).** Beyond giving symbols a directory + namespace *home* (Q-3/Q-4), Phase Q also gives
> poorly/inconsistently-named symbols a consistent *name*, against the same Vital bar. The audit
> found: four `class Parser` copies collapsing to one `json::Parser` (Q-W1); shared pure-UI rect
> types (`FooterRect`/`ButtonRect`) that the codebase already hand-checks for collision
> (`footer_bar.h`'s "NAME NOTE") — resolved by the Q-4 sub-namespaces for free; the
> `bank_model`/`BankIndex` file↔class word-mismatch (Q-8); and the `capture_realtime`/
> `realtime_record` shell↔core word-order inversion (Q-9). **Renames ride the wave that already
> relocates/splits the file — no dedicated naming wave (Q-7);** the geometry-mirror
> `compute*`/`hitTest*` verb vocabulary and the `_tests` suffix are already consistent and are
> preserved verbatim. Naming changes are zero-behavior-change like the rest of Phase Q, and the
> FOREVER-STABLE contract strings (command ids, action names, ext-state namespace/keys, VST3 UID)
> are **not** C++ symbols and are never renamed.
>
> **Every point is independently landable and CTest-green at EVERY step.** The CMake
> per-module static-lib + per-module test-executable seams already draw the module boundaries;
> a file move + namespace change is mechanically verifiable — `ctest --test-dir build` is green
> or it isn't. **Green-CTest-at-every-point is an acceptance criterion.** Big-bang is rejected;
> the reorg is risk-ordered waves (W1 safe opener → W2–W5 god-module splits → W6 OCP finish).
## Q-W0 — pre-restructure functional + DSP quality audit (runs FIRST; gates Q-W1)
**Goal:** Before a single structural point moves, perform a **thorough static/functional audit** of
the codebase and produce a **written, triaged findings report**. This is the *functional-correctness
and algorithm-quality* complement to the grep-verified SOLID/naming audit that already grounds
Q-W1..Q-W6 (§2/§2b of `docs/product/code-organization.md`) — it goes deeper on *does the code do the
right thing well*, not *where does the responsibility live*. It hunts, across the whole `src/` tree:
duplicate code, reinvented wheels, poor-quality algorithms (**close eye on the pitch engine**),
numerical-robustness and artifact hazards in the DSP paths, leaky pure/shell boundaries, and
**domain-modeling smells around env-coupled constants** (values stored in a frame/rate/DPI/tick-coupled
domain that should be stored rate-free and resolved at use). Every finding is **classified for
disposition**: *eliminate-before-restructure* (fix-now) vs. *document-and-defer* (with rationale).
Nothing structural (Q-W1+) begins until this wave closes and Daniel signs off on the disposition of
every finding. CONTEXT.md §Phase Q (Q-W0 audit scope + triage). See
`docs/product/code-organization.md` §2c.
**Verify:** A findings report exists and is complete over the named audit surfaces (DSP/audio incl.
pitch; architecture smells; env-coupled-constant domain-modeling smells). **Every finding is
triaged** (fix-now vs. documented-and-deferred, each with a one-line rationale). Fix-now findings are
either remediated in this wave or explicitly assigned to the downstream wave that already touches the
file (recorded per finding); no fix-now finding is left implicit. Any behavior-changing remediation
lands with its module's CTest executable green and (where a DSP path changes audibly) a stated
before/after listening or null check. **The gate to Q-W1 is: triage complete + Daniel signed off.**
**Depends on:** the GATE (tree quiescent). Precedes every other Q wave — Q-W1 depends on Q-W0.
- [ ] **DSP / audio audit — close eye on pitch.** Assess *algorithm quality* (correctness,
artifacts, numerical robustness, interpolation quality, reinvented-wheel vs. established DSP
technique) across: `src/vst/pitch_shift` (hand-rolled OLA pitch-preserve — window/overlap choice,
phase handling, transient/formant behavior, buffer edges), `sampler_core` (repitch ratio math,
interpolation order/quality, loop-point crossfade, voice-stealing correctness/click behavior),
`peaks` (envelope min/max binning), `wav_trim` (decay-scan threshold + truncate plan), and the
capture/tail paths. **Pitch-remediation depth (Q-11 SETTLED, Daniel 2026-07-27): defer to
findings** — default document-and-defer; only if the audit surfaces artifacts that matter, weigh a
bounded OLA fix (window/overlap/edge tuning) **before** a technique replacement. A technique
replacement (phase-vocoder / WSOLA) reshapes `pitch_shift`, spills a downstream Q-wave point, and is
a **Daniel decision at triage time, not an automatic Q-W0 action** — Q-W0 surfaces the
recommendation, Daniel calls it.
- [ ] **Architecture-smell audit.** Duplicate code, reinvented wheels, poor abstractions, and any
leaky pure/shell boundary (a `core/` module reaching a REAPER/host type, or geometry/algorithm
math living untestable in a shell). Cross-check against — but do not merely restate — the §2/§2b
SOLID/naming findings; Q-W0's contribution is the *functional* smells those audits didn't target.
- [ ] **Env-coupled-constant domain-modeling audit (explicit smell category).** Flag ANY value
stored in a frame/rate/DPI/tick-coupled domain that should be stored **rate-free and resolved at
the point of use** — per the load-bearing invariant that wall-clock times are rate-free SECONDS
resolved against the live project rate (`sample_map`), with NO hardcoded sample rates in `src/`.
Treat this as **domain-modeling** (store rate-free, resolve at use), **not** "rescale by rate."
There was a prior incident here — envelope times stored in the frame domain — so this is a
first-class category, not a footnote. Sweep envelope times, loop points, fade lengths, tail
lengths, and any UI geometry constant that silently assumes a DPI/rate.
- [ ] **Triage + report.** Write the findings report as a **committed doc,
`docs/product/code-quality-audit.md`** (Q-10 SETTLED, Daniel 2026-07-27 — beside the SOLID/naming
audit, not a tracked issue list); classify each finding fix-now vs. document-and-defer with a
one-line rationale; for each fix-now, note whether it is remediated in Q-W0 or assigned to the
downstream wave that already opens the file. Deferred findings carry a documented rationale so they
are a decision, not an omission.
- [ ] **Sign-off gate.** Daniel reviews the triage and signs off on each disposition. Q-W1 does not
begin until this is done; fold any new/reshaped downstream points the audit surfaces into
Q-W1..Q-W6 before starting them.
## Q-W1 — safe opener: extract `core/json` + impose the directory/namespace layout on clean modules
**Goal:** The zero-god-module-risk opener. Two moves: (1) extract a pure **`core/json`** module
(parser + serializer) and **delete the four hand-rolled `Parser`s** in `bank_model` /
`bank_book` / `view_mode_model` / `owned_manifest` (the single largest DRY+SRP violation, and
entirely off the hot paths); (2) impose the settled `core/`/`shell/`/`app/` directory layout +
sub-namespaces (`reasampler::model`/`view`/`capture`/`audio`/`ui`/`reclaim`/`version`/`json`) on
the **30 clean pure libs + the clean shells that need no splitting** — pure relocation, no logic
change. Proves the wave discipline (relocate + encapsulate, CTest-green) before any god-module
surgery. CONTEXT.md §Phase Q (json extraction; directory + namespace map).
**Verify:** CTest green at every commit. The four duplicate `Parser`s are gone, replaced by one
`core/json` consumed by all four models; round-trip serialization is byte-identical to before
(no format change — a *structural* dedupe, not a behavior change). Every relocated clean module
compiles and its test executable passes unmoved. `Sample` (model) vs `AudioSample` (audio) vs
unified `Parser` (json) do not collide once sub-namespaced. No REAPER type crosses into any
`core/` file; the CMake pure/shell enforcement still holds.
**Depends on:** the GATE (tree quiescent) **and Q-W0 closed** (audit triaged + Daniel signed off;
any fix-now findings the audit assigned to Q-W1 folded in). First structural wave.
- [ ] Extract `core/json` (pure parser + serializer: parseString/parseInt/parseKey/skipValue +
escape, plus emit helpers); unify under `reasampler::json`; guard the `Parser` name against
cross-lib collision. Off all hot paths — safe to abstract freely.
- [ ] Rewire `bank_model`, `bank_book`, `view_mode_model`, `owned_manifest` onto `core/json`;
**delete the four duplicate `Parser`s.** Round-trip output byte-identical (dedupe, not
reformat).
- [ ] Relocate the 30 clean pure libs into `core/{model,view,capture,audio,ui,reclaim,version,
json}/` and the clean shells into `shell/{capture,panel,view,persist,actions}/`; move
`main.cpp` to `app/`. Update `CMakeLists.txt` `src/` paths only (no target-graph change).
- [ ] Apply sub-namespaces matching the directories on every relocated *clean* module (the
god-modules re-namespace their own new TUs as they split, W2–W5). Resolve `Sample`/
`AudioSample`/`Parser` homes. **This alone resolves the naming *collisions*** (§2b.2): the
shared pure-UI rect types (`FooterRect`/`ButtonRect`/`Selection`/`CellRect`) get one `ui::`
owner — retire the hand-collision "NAME NOTE" in `footer_bar.h`.
- [ ] **Naming riders (Q-8, if settled):** rename the survivor JSON parser to `json::Parser`
(or `json::Reader`/`json::Writer`); if Daniel takes the `BankIndex`→`BankModel` rename, land
it here (mechanical class rename, verified by `bank_model_tests`). No rename on a file this
wave isn't already relocating (Q-7).
- [ ] Confirm CTest green + no hot-path change: `peaks`/audition/realtime-tick untouched by this
wave (pure relocation of clean modules; `peaks` stays a free function).
## Q-W2 — split `bank_panel.cpp` (the biggest god-module, 2424 LOC)
**Goal:** Split the largest god-module (8+ responsibilities) along the audit's named seams:
`panel_render` / `panel_thumbnails` / `panel_audition` / `panel_input` / `panel_bank_ops` /
`panel_window`. Split the fat `bank_panel.h` alongside (Interface Segregation). **Preserve the
audition hot path as a direct call-through, never virtual.** `panel_bank_ops` becomes the single
home for the bank-CRUD verbs that W4 will dedupe `actions.cpp` against. CONTEXT.md §Phase Q
(bank_panel split seams; hot-path audition guardrail). See `docs/product/code-organization.md`
§2.1, §5.
**Verify:** CTest green at every commit. Each seam is its own TU under `shell/panel/`; the panel
draws, thumbnails, auditions, handles input, does bank ops, and manages its window exactly as
before (no behavior change — verify in DAW that the panel is visually and interactively
unchanged). Audition/preview call path stays a **direct call-through** (no virtual dispatch, no
added header→TU indirection on the preview path). The ~20-function public API is now segmented
across the split headers.
**Depends on:** Q-W1 (directory/namespace layout established). Independently landable.
- [ ] Split rendering (`draw*`/`paint*`) → `panel_render`; thumbnail compute+cache →
`panel_thumbnails`.
- [ ] Split the audio audition/preview engine → `panel_audition` — **direct call-through, not
virtual; preview idle path unchanged.**
- [ ] Split input handling (mouse/key/wheel) + new-content detection → `panel_input`; window
lifecycle + OS drag-out/drop-target → `panel_window`.
- [ ] Extract bank-CRUD verbs → `panel_bank_ops` (the future single owner; W4 dedupes
`actions.cpp` against it). Split `bank_panel.h` into per-seam headers (I).
- [ ] Verify in DAW: panel unchanged; CTest green; no hot-path indirection added.
## Q-W3 — split `main.cpp` (hoist orchestration; leave main = pointers + entry + dispatch)
**Goal:** Reduce `main.cpp` (1762 LOC) to its actual job — API pointers + `ReaperPluginEntry` +
dispatch (~the owns-pointers ~120 lines) — by hoisting: `capture_orchestrator` (`RunCapture` /
`captureAndIndexOne` / `renderOffline` / batch/recapture/realtime `Run*`), `scope_resolve`
(`resolveRange`/`resolveRazorRange`/`collectSelectedTracks` + provenance assembly inputs), and
`realtime_lifecycle` (the realtime-capture state machine + globals + selection guards).
**`FxBypassGuard` moves out but stays a stack RAII object (precision-critical); the realtime idle
tick stays a single pointer test.** CONTEXT.md §Phase Q (main split seams; FxBypassGuard +
realtime-tick guardrails). See `docs/product/code-organization.md` §2.1, §3.
**Verify:** CTest green at every commit. Capture (offline + realtime + batch + recapture) behaves
identically in DAW; the null test still nulls, bit-identical repeats still match (the precision
invariants `FxBypassGuard` protects are unchanged); capture ≠ placement holds (no hoisted `Run*`
path gains an `InsertMedia` call). The realtime idle fast-path is still a single pointer test.
`main.cpp` is now pointers + entry + dispatch only.
**Depends on:** Q-W1. Independent of Q-W2.
- [ ] Hoist capture orchestration → `capture_orchestrator` (`shell/capture/`); keep
`FxBypassGuard` a **stack RAII** object as it moves (precision-invariant-critical).
- [ ] Hoist scope/source resolution + provenance assembly inputs → `scope_resolve`.
- [ ] Hoist the realtime-capture lifecycle state machine + globals + the two RAII selection
guards → `realtime_lifecycle`; **idle tick stays a single pointer test.**
- [ ] Leave `main.cpp` = API-pointer ownership + `ReaperPluginEntry` + dispatch; move to `app/`.
- [ ] **Naming rider (Q-9, if settled):** align the `capture_realtime` (shell) / `realtime_record`
(pure) word-order inversion to the house shell↔core convention (rec: stem `capture_realtime`,
shell suffixed) — a free rider since W3 already hoists the realtime lifecycle. No rename on a
file this wave isn't already touching (Q-7).
- [ ] Verify in DAW: null test nulls, bit-identical repeats match, capture≠placement holds;
CTest green; no realtime-tick branch-shape change.
## Q-W4 — split `actions.cpp` + dedupe bank verbs against `panel_bank_ops`
**Goal:** Split the two unrelated command-id families in one TU (981 LOC) into
`design_view_actions` / `bank_actions` / `prune_action`, and **dedupe** `actions.cpp`'s own
`promptText`/`mintBankId` and bank verbs against the `panel_bank_ops` single-owner established in
Q-W2. `prune_action` keeps the `doBankPruneFolder` deletion authority contract intact (routes to
`persist`'s `prune_fs` after W5). CONTEXT.md §Phase Q (actions split seams; bank-verb dedupe).
See `docs/product/code-organization.md` §2.1, §2.4.
**Verify:** CTest green at every commit. Every action fires identically in DAW (Design View
family; multi-bank create/rename/reorder/delete/evacuate/activate/move/copy/remove; prune). The
bank-CRUD verbs have **one** implementation home (no `bank_panel`/`actions` duplication). Each
bank verb still wraps its mutation in one batched undo point; the prune action still writes no
ext state and opens no undo point. Command-id strings are **unchanged** (FOREVER-STABLE
contract — a reorg must not touch a shipped command id).
**Depends on:** Q-W2 (`panel_bank_ops` is the dedupe target). Independent of Q-W3.
- [ ] Split → `design_view_actions` (toggle/activate/tag/untag/showBoth/moveItems),
`bank_actions` (bank CRUD family), `prune_action` (`doBankPruneFolder` — the single
file-deletion action).
- [ ] Dedupe `actions.cpp`'s `promptText`/`mintBankId` + bank verbs against `panel_bank_ops`
(one owner); do **not** change any command-id string.
- [ ] Verify in DAW: all action families fire unchanged; one bank op = one Ctrl-Z; prune still
no-undo/no-ext-state; CTest green.
## Q-W5 — split `persist.cpp` (isolate the single file-deletion authority into `prune_fs`)
**Goal:** Split `persist.cpp` (766 LOC, 5 responsibilities) into `session` (lifecycle+poll,
`BeginLoadProjectState` reload hook), `ext_state_io` (the ext-state ↔ JSON serialization bridge +
GUID minting + folder relocation), and **`prune_fs`** (prune scanning + `deleteOrphanFile` via
`SHFileOperationW`). The split **concentrates** the byte-deleting authority into one obvious
module — it must never spread it. CONTEXT.md §Phase Q (persist split seams; deletion-authority
isolation). See `docs/product/code-organization.md` §2.1, §7.
**Verify:** CTest green at every commit. Session save/load/undo-reload, ext-state round-trip,
folder relocation, and prune deletion all behave identically in DAW. **File deletion lives in
exactly one module (`prune_fs`)** — the single-file-deletion-authority invariant is *improved*
(concentrated), never diluted. Relative-paths-only persistence is unchanged.
**Depends on:** Q-W1. Best after Q-W4 (so `prune_action` routes cleanly to `prune_fs`), but
independently landable.
- [ ] Split → `session` (lifecycle/poll + `projectconfig` reload hook), `ext_state_io`
(serialization bridge + GUID minting + folder relocation).
- [ ] Isolate prune scanning + `deleteOrphanFile` (`SHFileOperationW`) → **`prune_fs`** — the
one file-deletion module; nothing else may delete bytes.
- [ ] Verify in DAW: save/load/undo-reload/relocation/prune unchanged; deletion authority is one
module; relative-paths-only holds; CTest green.
## Q-W6 — OCP registration-table + residual fat-header (I) splits
**Goal:** Close the last SOLID wart: replace the ~350-line hand-written **non-table** action
registration blocks (now isolated in `app/main.cpp` after Q-W3) with a **registration table**, so
adding an action edits one place, not four parallel ones (OCP). Split any remaining fat headers
(`capture.h`/`persist.h`) not already resolved by their TU splits (I). CONTEXT.md §Phase Q (OCP
registration-table). See `docs/product/code-organization.md` §2.3, §6 (Q-6).
**Verify:** CTest green at every commit. Every action still registers, appears in the Actions
list, and fires via `hookcommand` exactly as before; command-id + display strings unchanged
(FOREVER-STABLE, per-channel); unload still mirror-unregisters everything. Adding a hypothetical
new action now touches the table only (demonstrated in review, not shipped). Remaining fat
headers are segmented.
**Depends on:** Q-W3 (registration code must be isolated first). Sequenced last; the most
droppable point if the phase needs narrowing (Q-6).
- [ ] Convert the hand-written `Register("command_id"/"gaccel"/"hookcommand")` blocks to a
data-driven registration table; unload mirror-unregisters from the same table.
- [ ] Split residual fat headers (`capture.h`/`persist.h` and any other) alongside their TUs (I).
- [ ] Verify: all actions register/fire/unregister unchanged; command-id strings untouched; CTest
green.
## Phase Q — sequencing
```
GATE: Phase S + Phase L L3 merged to dev (D2 complete, M9 abandoned) — tree quiescent
("when Phase S and L3 are finished" — L1/L2/L3/L4–L7 all landed — GATE SATISFIED)
│
▼
Q-W0 (pre-restructure functional + DSP quality audit — findings report + triage)
│ ── SUB-GATE: triage complete + Daniel signed off on every disposition ──
▼ (fix-now findings remediated/assigned; downstream Q-W1..W6 reshaped as needed)
Q-W1 (safe opener: core/json extract + directory/namespace layout on clean modules)
├─► Q-W2 (split bank_panel) ──► Q-W4 (split actions + dedupe bank verbs vs panel_bank_ops)
├─► Q-W3 (split main.cpp; hoist orchestration) ──► Q-W6 (OCP registration-table + I splits)
└─► Q-W5 (split persist; isolate prune_fs) [best after Q-W4]
```
Q-W0 is the **entry point** — the functional/DSP audit runs FIRST and gates Q-W1 (no structural
point begins until its triage closes and Daniel signs off). W1 is then the safe, high-leverage
structural opener (all later waves assume the layout it establishes). The four god-module splits
(W2–W5) are risk-ordered and mostly parallel-safe; W4 depends on W2's `panel_bank_ops`, W6 depends
on W3's isolated registration code. Big-bang is rejected — every wave is independently landable and
CTest-green.
## Phase Q — must-verify-before-build
- **Q-W0 closed before any structural point** — the functional/DSP audit's findings report exists,
every finding is triaged (fix-now vs. document-and-defer, each with rationale), fix-now findings
are remediated or assigned to the wave that opens their file, and **Daniel has signed off on every
disposition.** Q-W1 does not begin otherwise. (CONTEXT.md §Phase Q Q-W0; naming/DSP smell
categories §2c of `docs/product/code-organization.md`.)
- **Hot-path call/inline shape** — before landing each split, confirm no virtual dispatch and no
header→TU indirection was added on `peaks` envelope compute, audition/preview, or the realtime
tick. `computeEnvelope` stays a free function on `const std::vector<float>&`;
audition stays a direct call-through; the idle tick stays a single pointer test. (CONTEXT.md
§Phase Q, `docs/product/code-organization.md` §3.)
- **Command-id + display strings are FOREVER-STABLE** — a reorg must not change a shipped
`command_id` string, action display name, ext-state namespace, or VST3 class UID. Re-namespacing
C++ symbols is orthogonal to these on-the-wire/on-disk contract strings; keep them byte-identical
(per-channel, per the Phase V V4 contract). (CONTEXT.md §Phase Q.)
- **Name-collision sweep on sub-namespacing** — `Sample` (model) vs `AudioSample` (audio) vs the
unified `Parser` (json), plus the shared pure-UI rect types `FooterRect`/`ButtonRect` (already
hand-collision-checked in `footer_bar.h`), and any other cross-lib name that collides once
flattened into granular namespaces. Resolve by each symbol's new subsystem home before landing
W1. (naming audit §2b.2; `docs/product/code-organization.md` §6 Q-4/Q-8.)
- **Naming stays zero-behavior-change and off the wire** — the §2b renames touch C++ symbols only;
no `command_id` string, action display name, ext-state namespace/key, `reasampler:` lane prefix,
or VST3 class UID is renamed (naming audit §2b.5). A rename that would alter a shipped contract
literal is out of scope, full stop.
- **The GATE** — do not begin any Q point until **Phase S + Phase L L3** are merged to dev and the
tree is quiescent (D2 complete, M9 abandoned). Re-confirm quiescence against dev before W1.
README.md
+114 -28
View File
@@ -1,20 +1,38 @@
# ReaSampler
A native C++ REAPER extension that captures any arbitrary audio source into a
per-project **sample bank** (cached files + a docked grid), decoupled from the
arrange view, with keyboard/MIDI-bindable capture and placement. Built as a
precision tool: deterministic, non-destructive, no clutter.
Version 1.6.0 · License: GNU AGPL v3 (see `LICENSE`)
A per-project audio sample-bank capture tool for REAPER, built as two artifacts: a
native C++ REAPER extension (`reaper_reasampler`) and a Windows-only VST3 sampler
instrument (`reasampler_9000.vst3`, ReaSampler 9000). It captures any arbitrary audio
source into a per-project **sample bank** (cached files + a docked grid), decoupled
from the arrange view, with keyboard/MIDI-bindable capture and placement. It is
designed as a precision tool: deterministic captures, non-destructive by
construction, no auto-inserted clutter.
## Status
Under active development, not yet formally released.
## The two artifacts
**`reaper_reasampler`** — the REAPER extension. Captures audio into a named,
per-project sample bank, displays it in a docked panel, and provides bindable
actions for capture and placement.
per-project sample bank and provides bindable actions across the workflow: offline
and realtime capture (with cancel), batch capture (per selected item or per razor
area), recapture-from-source, capture-and-assign to a live instrument instance,
insert with an opt-in tempo-conform variant, the resample-bake landing action,
multi-bank management (pool, activate, evacuate, move, copy, delete), prune/reclaim,
provenance and lineage tracking, Design View, and ingest via drag-out, arrange-drop,
and instrument-drop. All of it surfaces in a docked bank panel.
**ReaSampler 9000** (`reasampler_9000.vst3`) — a Windows-only VST3 sampler
instrument that plays bank captures back across a MIDI keyboard. The VST3 target
(`reasampler_vst`) is gated on the vendored `vendor/vst3sdk` slice; configure
quietly omits it if the slice is absent.
instrument that plays bank captures back across a MIDI keyboard. Since
`ComponentState` v10 it is self-contained: it decodes samples from its own
persisted references and plays with the extension absent, treating the bank as a
browsing source rather than a runtime dependency. The VST3 target
(`reasampler_vst`) is gated on `WIN32 AND EXISTS .../pluginfactory.cpp` — omitted
on macOS/Linux even when the vendored `vendor/vst3sdk` slice is present, and
quietly omitted anywhere the slice itself is absent.
A **beta channel** build is available via `-DREASAMPLER_CHANNEL=beta` at configure
time, producing `reaper_reasampler_beta` and `reasampler_9000_beta.vst3`. The two
@@ -27,8 +45,35 @@ and adds an index entry. It **never** puts an item in the arrange view. Placemen
is a distinct, on-demand action. Any code path that auto-inserts a capture into the
timeline violates the purpose of the tool.
## Prerequisites
- CMake ≥ 3.19
- A C++17 compiler
- Windows + MSVC to build the VST3 target (`reasampler_vst`) — the REAPER extension
itself is cross-platform
- PHP, to run the SWELL resource-generation step on macOS/Linux (below)
## Platform support
The REAPER extension targets Windows, macOS, and Linux; ReaSampler 9000 (the VST3
instrument) is Windows-only.
| Platform | Extension | VST3 instrument |
|---|---|---|
| Windows | Builds with no extra steps | Builds when `vendor/vst3sdk` is present |
| macOS | Builds, but dialogs need the manual SWELL resgen step below plus hand-uncommenting the `APPLE` `target_sources` block in `src/app/CMakeLists.txt` | Not built (Windows-only gate) |
| Linux | Same manual resgen + hand-uncomment requirement as macOS, against its own commented block | Not built (Windows-only gate) |
A macOS/Linux build that skips the resgen-and-uncomment step compiles cleanly
without dialogs and without a warning — this is expected, not a bug.
## One-time setup
A plain `git clone --recursive` also works, but it pulls every nested submodule of
`vendor/vst3sdk` (including `vstgui4`, `tutorials`, `doc`, `cmake` — none of which
this project links against). The steps below pull only the three submodules
actually needed:
git submodule update --init
Vendors three submodules:
@@ -43,10 +88,25 @@ Vendors three submodules:
cmake -B build -S .
cmake --build build
ctest --test-dir build
ctest --test-dir build -C Debug
Pure modules have `<module>_tests` targets that run without REAPER or a DAW.
`CMakeLists.txt` is the authoritative list of all targets.
On a multi-config generator (Visual Studio, Xcode), `cmake --build build` with no
`--config` builds **Debug** — nothing in this build sets `CMAKE_BUILD_TYPE` or an
optimization flag, so that's the default. The `-C Debug` above is required on a
multi-config generator too: without it, `ctest` silently reports every test as "Not
Run" instead of running them. Single-config generators (Ninja, Make) need neither
flag.
Pure `core/` modules each have a corresponding `<module>_tests` executable target
that runs without REAPER or a DAW. Targets are declared per-directory — each
`src/**/CMakeLists.txt` owns its own libraries and test targets, pulled in via
`add_subdirectory` from the root `CMakeLists.txt`, which itself declares no targets
directly.
Installing or judging performance requires the Release config explicitly:
cmake --build build --config Release
ctest --test-dir build -C Release
### Beta channel
@@ -60,33 +120,59 @@ Pure modules have `<module>_tests` targets that run without REAPER or a DAW.
php vendor/WDL/WDL/swell/swell_resgen.php src/resource.rc # macOS; Linux reuses the output
Add the generated file to the appropriate `APPLE` / Linux `target_sources` block in
CMakeLists.txt. The SWS extension build is the canonical reference for this step.
`src/app/CMakeLists.txt` (both are commented out by default). The SWS extension
build is the canonical reference for this step.
## Install
Copy the built binary into REAPER's `UserPlugins/` folder
(Options → Show REAPER resource path), then **restart REAPER**. Extensions load at
startup only; there is no hot reload.
There is no hot reload; REAPER loads extensions at startup only.
**Extension** — copy the **Release** build's `reaper_reasampler` binary
(`build/Release/` on a multi-config generator — not the default `Debug/` output)
into REAPER's `UserPlugins/` folder (Options → Show REAPER resource path), then
restart REAPER.
**VST3 instrument** — copy the **Release** build's `reasampler_9000.vst3` into the
system VST3 folder (`C:\Program Files\Common Files\VST3` on Windows) — a different
destination from the extension, not `UserPlugins/`. REAPER picks it up on its next
plugin rescan.
## Repo layout
The codebase is organized around one discipline: **pure, REAPER-free testable core
split from REAPER-facing shells**.
The codebase is organized around one discipline: **pure, REAPER/VST3-SDK-free
testable core, split from the REAPER- and VST3-facing shells that touch those host
types.**
- `src/` — pure core modules (no REAPER types, unit-testable outside the DAW) and
REAPER-facing shells (extension entry point, panel, actions, capture backends, etc.)
- `src/vst/` — the VST3 instrument: pure voice engine + zone payload + editor UI
pure modules, and the VST3 shells
- `tests/` — unit tests for the pure core modules
- `src/app/` — the REAPER extension's entry point (`main.cpp` only)
- `src/core/` — pure modules, no REAPER or VST3 SDK types, each with a
`<module>_tests` target: `audio/`, `capture/`, `instrument/` (further split into
`bake/`, `engine/filter/`, `engine/loop/`, `map/`, `note/`, `ui/`), `json/`,
`model/`, `reclaim/`, `tracking/`, `ui/`, `util/`, `version/`, `view/`, `wire/`
- `src/shell/` — REAPER/VST3-facing shells: `actions/`, `bank_ops/`, `capture/`,
`instrument/` (the ReaSampler 9000 VST3 shells), `panel/`, `persist/`, `view/`
- `src/resource.rc`, `src/resource.h`, `src/ext_keys.h` — root-level build inputs
not claimed by any one subdirectory
- `tests/` — unit test sources for the pure `core/` modules
- `cmake/` — shared CMake target-declaration helpers
- `docs/` — plan-style docs and product-design docs (see Further reading, below)
- `vendor/` — git submodules
See `CLAUDE.md` for the full module inventory, architectural contracts, and the
precise boundary between pure core and REAPER-facing shells.
precise boundary between pure core and REAPER/VST3-facing shells; each `src/**/`
directory also carries its own `CLAUDE.md` with that area's own module list and
invariants.
## License
GNU AGPL v3, copyright Daniel Harvey. See `LICENSE`.
## Further reading
- `CLAUDE.md` — architecture, module inventory, and build/API contracts
- `CONTEXT.md` — the authoritative spec (large: ~186k — grep the relevant section rather than reading whole)
- `CONTEXT-ARCHIVE.md` — build detail for landed work
- `PLAN.md` — roadmap
- `COMPLETED.md` — landed milestones
- `docs/PLAN.md` — the active roadmap
- `docs/COMPLETED.md` — landed milestones for the current (1.x) cycle
- `docs/TODO.md` — deferred follow-ups, with the reason each was deferred
- `docs/TODO-1.0.md` — the raw 1.x work list this cycle's plan was structured from
- `docs/ARCHIVE.md` — pre-1.0 history
- `docs/cmake-cheatsheet.md` — a standalone build-system reference
- `docs/product/` — the product-design reasoning behind each phase
TODO.md
-17
View File
@@ -1,17 +0,0 @@
# TODO
Forward-looking follow-ups. Deferred by decision, not oversight — each entry records why it was deferred and what "done" looks like.
## Persist ReaSampler 9000 instance identity to let prune reclaim de-referenced captures after reopen
**Context (what shipped — Phase S usage-detection).** Each ReaSampler 9000 instance publishes the captures it holds to project ext-state (`rsusage_<guid>` keys, ComponentState v11). The extension's prune reads those records and unions every live instance's held captures into the referenced-set, so a capture any live instance holds can never be pruned. Fail-safe: unreadable/ambiguous usage state aborts prune (deletes nothing). Airtight on safety.
**The wart.** The per-instance identity token is minted fresh each incarnation and is NOT persisted. After save→reopen, an instance cannot recognize its OWN prior-session usage record — it looks foreign, so the instance defensively unions and marks the record append-only (poisoned). Net effect: after any reopen, prune stops reclaiming captures an instance once loaded but no longer uses. Safe (never deletes a used capture), but the bank folder grows without bound.
**Intended fix.** Persist the instance identity in ComponentState so an instance recognizes its own last-session record and does a clean-replace instead of union/poison → prune reclaims de-referenced instance-touched captures normally.
**The constraint the fix MUST handle (why deferred).** VST3 provides no stable per-instance identity, and Ctrl+D / in-place FX duplication clones plugin state. A persisted identity is inherited by an in-place duplicate → two live instances in one project share one `rsusage_<guid>` key. Harmless while both hold the same capture; the risk is a divergent clone — the copies load DIFFERENT captures, and last-writer-wins drops the other's held capture from the record, exposing it to prune. The fix must detect a genuine live same-identity collision and protect the union in that case, WITHOUT reintroducing the sibling-drop bug the fresh-per-session token was originally added to prevent. (Whole-project copies are a non-issue — bank files are cloned with the project and ext-state is per-project.)
**Priority / risk.** Low / deferred. Current behavior is safe; the only cost is unbounded bank-folder growth after reopens. Decided 2026-07-28 to ship the safe version and defer this.
**Done looks like.** Save → reopen → de-reference a capture from an instance → prune reclaims it. And: in-place-duplicate + diverge + delete-from-bank never deletes a capture a live instance holds.
cmake/reasampler_targets.cmake
+35
View File
@@ -0,0 +1,35 @@
# The two shapes that repeat across src/: a pure static library and its CTest target.
# Both are thin pass-throughs — LINK is forwarded to target_link_libraries verbatim, so
# PUBLIC/PRIVATE keywords and link order stay visible at the call site rather than being
# invented by the helper. Targets that genuinely deviate are written out longhand.
# Every pure library carries src/ as a PUBLIC include dir: headers are included rooted
# there ("core/json/json.h"), so a consumer needs only the link edge.
function(reasampler_pure_library name)
cmake_parse_arguments(ARG "" "" "SOURCES;LINK" ${ARGN})
add_library(${name} STATIC ${ARG_SOURCES})
target_include_directories(${name} PUBLIC ${REASAMPLER_SRC_DIR})
if(ARG_LINK)
target_link_libraries(${name} ${ARG_LINK})
endif()
# A default-less switch missing an enumerator: MSVC's C4062 is off by its /W1 default;
# GCC/Clang's -Wswitch is on by default but only warns without -Werror, and this repo
# sets no -Wall/-Werror/-W4/-WX anywhere. Promoted to an error only here, on our own
# pure libraries, so a deliberately default-less switch (e.g. deckParamCommit,
# deck_groups.cpp) is a compile error on every toolchain. NOT C4061 (fires even with
# a default: present) — that would light up every defensive switch in the tree.
if(MSVC)
target_compile_options(${name} PRIVATE /we4062)
elseif(CMAKE_CXX_COMPILER_ID MATCHES "GNU|Clang")
target_compile_options(${name} PRIVATE -Werror=switch)
endif()
endfunction()
# Test naming is exceptionless: target <name>_tests is built from tests/test_<name>.cpp
# and registered under its own target name.
function(reasampler_test name)
cmake_parse_arguments(ARG "" "" "LINK" ${ARGN})
add_executable(${name}_tests ${REASAMPLER_TESTS_DIR}/test_${name}.cpp)
target_link_libraries(${name}_tests PRIVATE ${ARG_LINK})
add_test(NAME ${name}_tests COMMAND ${name}_tests)
endfunction()
docs/ARCHIVE.md
+1065
View File
File diff suppressed because it is too large Load Diff
docs/COMPLETED.md
+1662
View File
File diff suppressed because it is too large Load Diff
docs/PLAN.md
+2303
View File
File diff suppressed because it is too large Load Diff
docs/TODO-1.0.md
+1682
View File
File diff suppressed because it is too large Load Diff
docs/TODO.md
+908
View File
@@ -0,0 +1,908 @@
# TODO
Forward-looking follow-ups. Deferred by decision, not oversight — each entry records why it was deferred and what "done" looks like.
## The per-voice filter is solved against the WAV's sample rate, not the render rate
**Context (what shipped — Θ-W2-T1, the filter in the voice path).** `Voice::start` sets `filterRate_ = sample.sampleRate` — the rate read off the **decoded WAV header** — and hands it to `VoiceFilter::prepare()` and every later `setCutoffNorm()`. But the voice emits exactly one frame per **host** frame, so the rate the corner should be solved against is the project/render rate the processor already latches in `setupProcessing` (`ReaSamplerProcessor::sampleRate_`), not the file's. The rate enters the DSP only through `g = tan(pi*fc/sr)` (`engine/filter/CLAUDE.md`), so a wrong `sr` scales the realized corner by exactly the ratio of the two rates.
**The wart.** When capture rate ≠ project rate, the corner lands at the wrong frequency, by that ratio. A 44.1 kHz capture in a 48 kHz project puts the corner roughly **1.5 semitones sharp** (48000/44100 ≈ 1.088×); the same capture in a 96 kHz project is roughly **13.5 semitones off**. The Nyquist clamp (`kFilterNyquistFraction`) measures against the wrong Nyquist for the same reason. This falsifies the guarantee `filter_params.h` states in its own words — that the persisted value is a normalized knob position precisely so one preset does not sound different at 44.1k and 96k. The control law honors that; the solve defeats it.
**Intended fix.** Thread the host render rate onto `SampleData` and set `filterRate_` from it. The processor already holds `sampleRate_` from `setupProcessing` and already guards on it being non-zero before building, so the value is available at exactly the point `SampleData` is constructed — this is a plumbing change, not a new mechanism.
**The constraint the fix MUST handle.** The engine **already conflates the two rates everywhere** — `sample_map` resolves the AHDSR's stored seconds at the WAV's own rate, and nothing resamples the source — so a cross-rate capture already plays back sharp *and* short by the same ratio. This is an inherited assumption, not a defect introduced by the filter; the filter is simply the first module where it lands as an audible **frequency** error rather than a timing one. A fix that corrects only the filter leaves the filter rate-correct while envelope timing stays rate-wrong. That is strictly less wrong and defensible, but it splits one assumption into two, and the split must be a deliberate choice rather than a side effect of fixing the loudest symptom. Second constraint: `filterRate_ <= 0` must keep meaning **bypass** — the filter module forbids a reference, calibration, or fallback rate anywhere in itself, and a plumbing fix must not smuggle one in as a default.
**Priority / risk.** Deferred by ruling — Daniel, 2026-07-30: *"record this and proceed."* Inaudible whenever capture rate == project rate, which is the common case for captures this tool made in the project they belong to. Audible and large on an imported or cross-rate capture, and worse the further the two rates diverge.
**Done looks like.** The realized filter corner matches `filterCutoffHzFromNorm(pos)` within measurement tolerance at every combination of capture rate and project rate; the Nyquist clamp measures against the render rate; and the decision about whether envelope timing follows the same correction is recorded rather than left implicit.
## Filter ring-out is truncated on the source-exhaustion path
**Context (what shipped — Θ-W2-T1).** The per-voice filter runs between the pitch stage and the amp multiply. When `readPos_` runs past the end of the sample with no usable loop, `Voice::advanceFrame` latches `active_ = false` and returns 0 — the voice stops feeding, and whatever energy remains in the filter's two integrators is discarded rather than rung out.
**The wart.** The filter's tail is cut at source exhaustion instead of decaying to the filter's own denormal floor.
**Why the common case is unaffected.** A released Gate note's filter tail is shaped to silence by the **amp release** before the read head reaches the end — that is the pipeline ordering (pitch → filter → amp) working exactly as designed. Trigger's fade-out has already taken the amp to ~0 at `playEnd`, so the discarded state is multiplied by ~0 regardless. The exposed case is a voice that reaches source exhaustion with the amp envelope still open.
**Intended fix.** Let a voice keep rendering the filter past source exhaustion — zero input, filter ringing — until `VoiceFilter::isSilent()`.
**The constraint the fix MUST handle (why deferred).** Extending a voice past source exhaustion changes `active()` and `soundingNote()`, and those two predicates feed `VoiceEngine`'s oldest-first stealing policy and the Preserve-voice tally. A ring-out voice would hold an allocation slot and could suppress or be stolen by a note-on that today would be routed differently — a materially larger blast radius than the track that found the defect, which is why it is deferred rather than patched at the call site. The existing takeover declick already carves out an `active() && !soundingNote()` ring-out state; a filter ring-out would be a second occupant of that state and must compose with it rather than fight it.
**The caveat both reviewers recorded.** The discarded state can be roughly `2Q` larger than the source that produced it, so at high Q the cut **amplifies** the step that already existed at source exhaustion rather than merely preserving it. The defect gets worse the more resonance is dialled in — it is not a uniformly small residual.
**Priority / risk.** Low / deferred. Recorded during Θ-W2-T1 review and left for a track that can own the voice-lifetime predicates.
**Done looks like.** A high-Q filtered voice that reaches source exhaustion with the amp envelope still open decays to the filter's denormal floor rather than cutting, with no change to voice-stealing behavior, the Preserve tally, or the takeover-declick ring-out state.
## Persist ReaSampler 9000 instance identity to let prune reclaim de-referenced captures after reopen
**Context (what shipped — Phase S usage-detection).** Each ReaSampler 9000 instance publishes the captures it holds to project ext-state (`rsusage_<guid>` keys, ComponentState v11). The extension's prune reads those records and unions every live instance's held captures into the referenced-set, so a capture any live instance holds can never be pruned. Fail-safe: unreadable/ambiguous usage state aborts prune (deletes nothing). Airtight on safety.
**The wart.** The per-instance identity token is minted fresh each incarnation and is NOT persisted. After save→reopen, an instance cannot recognize its OWN prior-session usage record — it looks foreign, so the instance defensively unions and marks the record append-only (poisoned). Net effect: after any reopen, prune stops reclaiming captures an instance once loaded but no longer uses. Safe (never deletes a used capture), but the bank folder grows without bound.
**Intended fix.** Persist the instance identity in ComponentState so an instance recognizes its own last-session record and does a clean-replace instead of union/poison → prune reclaims de-referenced instance-touched captures normally.
**The constraint the fix MUST handle (why deferred).** VST3 provides no stable per-instance identity, and Ctrl+D / in-place FX duplication clones plugin state. A persisted identity is inherited by an in-place duplicate → two live instances in one project share one `rsusage_<guid>` key. Harmless while both hold the same capture; the risk is a divergent clone — the copies load DIFFERENT captures, and last-writer-wins drops the other's held capture from the record, exposing it to prune. The fix must detect a genuine live same-identity collision and protect the union in that case, WITHOUT reintroducing the sibling-drop bug the fresh-per-session token was originally added to prevent. (Whole-project copies are a non-issue — bank files are cloned with the project and ext-state is per-project.)
**Priority / risk.** Low / deferred. Current behavior is safe; the only cost is unbounded bank-folder growth after reopens. Decided 2026-07-28 to ship the safe version and defer this.
**Re-examined 2026-07-30 by the tracking consolidation, and DELIBERATELY NOT absorbed.** The consolidation's mandate is a *safety* claim (no destructive act follows from ambiguity); this wart is a *completeness* one (nothing is lost, the folder grows). They do not conflict, and folding a fix in would have widened a safety-critical review surface with a mechanism that can under-protect. The strongest candidate examined was a **session epoch**: the extension mints a fresh epoch value at each project load and an instance stamps it into its record, so a record carrying a previous epoch is known-stale and may be clean-replaced regardless of nonce. It fixes exactly the reopen case — but a divergent same-key clone pair reopening together gives the first publisher a clean replace that drops the second's holds until the second republishes, i.e. a narrow revival of the sibling-drop bug. Any future attempt must close that window (e.g. by making the epoch rollover a union that clears the sticky poison only once both siblings have republished) before it is worth taking.
**Done looks like.** Save → reopen → de-reference a capture from an instance → prune reclaims it. And: in-place-duplicate + diverge + delete-from-bank never deletes a capture a live instance holds, with no window between the two publishes in which a hold is unprotected.
## Isolate capture from out-of-scope aux/parallel sends, not just FX/gain/pan
**Context (carried from PLAN.md's "Open questions to resolve during build").** The FX-scope capture neutralizes out-of-scope FX, gain, and pan for both item and track scope — root `CLAUDE.md`'s "Capture FX scope" precision invariant states this precisely: the out-of-scope chain (ancestors + master track, plus the item's own track for item scope) has its FX, gain, and pan/width/pan-law/mode neutralized to unity. **Aux/parallel sends are conspicuously absent from that enumerated list** — the invariant as currently written does not cover them, which is the gap this item exists to close.
**The wart.** A downstream coloring send (e.g. a folder → reverb-track send) still routes and blends into an item/track capture, past the intended isolation point. Repro from PLAN.md: folder F1; T1 (MIDI) sends MIDI to T2 (synth); T1+T2 → F1; F1 sends to reverb T3; capturing the MIDI item on T1 currently includes the reverb, but should be isolated to T2's synth output pre-F1 with the MIDI send preserved and the reverb send excluded.
**Intended fix.** Likely approach (PLAN.md): snapshot + mute out-of-scope tracks' aux sends during the render while preserving the main/source signal path.
**The constraint the fix MUST handle.** Distinguish **source routing that must be preserved** (e.g. a MIDI send T1→T2 where T2's synth is where a MIDI item's audio is actually produced — the "item level" for that MIDI item is T2's synth output) from **coloring sends that must be excluded** (folder→reverb). PLAN.md notes this is "the hard part" and that a rule is needed for which sends are load-bearing.
**Settled rule (Daniel, 2026-07-29).** The classification rule for which sends are load-bearing: (1) **ancestor sends are excluded** from the capture — the folder parent is *up* the folder tree but *downstream* in signal flow, so this item deliberately says "ancestor," not "upstream," which would read backwards to anyone applying signal-flow convention; (2) **sibling sends are preserved and captured** — a sibling is a track sharing the capture scope's parent; (3) **if the send's destination has a different parent, ignore it in the capture** — it isn't a sibling, so it isn't captured. Applied to the repro above: the T1→T2 MIDI send is a sibling send (T1 and T2 share parent F1) and is preserved — T2's synth is where the item's audio is actually produced; the F1→T3 reverb send is an ancestor send and is excluded. This resolves the repro.
**Still open.** The rule above settles *which sends to mute*, but the repro is only fully resolved together with a second, unspecified lever — *where the capture taps*. PLAN.md's own framing of this open question says a true item-level capture should be taken "at the isolated graph point — the target scope's output before out-of-scope track FX/gain/pan and before out-of-scope aux/parallel sends." How the mute-rule above and the tap-point interact is not yet specified.
**Priority / risk.** Not stated in PLAN.md (recorded there as an open `(TODO)` question, not yet triaged to a priority). Flagged here as mattering more than the other four carried-over items because it exposes a live gap in a stated precision invariant, not just a deferred feature.
**Done looks like.** Capturing the MIDI item on T1 in the repro above is isolated to T2's synth output pre-F1 — the T1→T2 MIDI send is preserved and the F1→reverb send is excluded — and the CLAUDE.md "Capture FX scope" invariant's neutralization list is extended to name sends explicitly.
## Confirm REAPER's VST3 UID-vs-filename instance rebind behavior (Phase S compat verification)
**Context.** PLAN.md, under "Phase S — product name (ReaSampler 9000)": the working assumption is that REAPER rebinds a saved instance by its VST3 class UID, not by the module filename, so a filename rename with an unchanged UID keeps saved projects working (existing instances still resolve).
**The wart.** This is not yet confirmed from source — PLAN.md records that a web check surfaced a JUCE/VST3-replace-VST2 case suggesting REAPER's binding is more nuanced than "UID only" (it can involve an FXID match), so UID-rebind is to-verify, not asserted fact.
**Intended fix / required check.** DAW-verify: save a project with a ReaSampler 9000 instance under the old filename, rename the module, reopen — confirm the instance rebinds and restores its state.
**The constraint the fix MUST handle.** If REAPER does key partly on filename, the fallback is to keep the current filename (display-strings-only) and record that as the shipped choice.
**Priority / risk.** Marked "must-DAW-verify before shipping the rename" in PLAN.md; no explicit priority level stated beyond that.
**Done looks like.** The save→rename→reopen DAW check is performed and its result (rebind confirmed, or filename-revert fallback taken) is recorded.
## S13 — cross-artifact ingest relay (deferred, spike verdict DEGRADED)
**Context.** PLAN.md records the ps-w12 (2026-07-27) spike verdict: DEGRADED — relay deferred. The instrument's REAPER bridge (`reaper_bridge`) is deliberately READ-ONLY; a relay would need a new instrument WRITE seam into ext-state and an extension-side timer poller servicing a drop-ingest inbox key with a claim/clear nonce — the same cross-process handshake race the S17 spec rejected for alternative (A). The shipped ingest gesture stays drop-onto-docked-panel (S8); the editor shows a "drop files onto the ReaSampler bank panel to add them" affordance as the degrade path.
**The wart.** Dropping a file directly onto the editor/instrument does not ingest it into the bank — only drop-onto-docked-panel does.
**Intended fix.** The editor hands the dropped path + this instance's identity to the extension as a bank-ingest request over an agreed seam.
**The constraint the fix MUST handle.** Requires (a) a new instrument WRITE seam into ext-state (breaking the current read-only-bridge invariant) and (b) an extension-side timer poller + claim/clear nonce — both are load-bearing design calls that need to be made deliberately, not as a call-site patch. Both the read-only-instrument boundary and the new poller were judged load-bearing enough that the relay is deferred to a future wave rather than pushed through now.
**Priority / risk.** PLAN.md marks this DEFERRED, awaiting a future wave, with no priority assigned.
**Done looks like.** Not stated in PLAN.md beyond "a future wave when the design is ready."
## Phase D2 — per-track lane/mode-state panel indicator (deferred)
**Context.** PLAN.md: Phase D2 is functionally complete (D2-W1, D2-W2, D2-W3-A, D2-W3-B all landed). One item was deferred out of that completion: a panel UI indicator for per-track lane/mode state (a per-track lane-split marker).
**The wart.** The mode switch already shows the active mode, but there is no per-track indicator; PLAN.md records that no natural cheap home for one was found in the bank panel.
**Intended fix.** Not specified in PLAN.md beyond the goal (a per-track lane-split marker in the bank panel) — the design is unresolved, which is part of why it was deferred rather than built.
**The constraint the fix MUST handle.** Finding a home for the indicator in the bank panel's existing layout, which PLAN.md notes doesn't currently have a natural cheap spot for it.
**Priority / risk.** Not stated in PLAN.md. PLAN.md's own framing: "Explicitly deferred — not silently dropped. Can be picked up later if wanted."
**Done looks like.** Not stated in PLAN.md.
## Dormant membership entries in persisted `view_state`
**Context.** CONTEXT.md's "Open questions to resolve during build" (Design View section), the second of the two sub-items left deferred after the reconcile-residuals ship described above.
**The wart.** Truly-deleted tracks accumulate stale entries in persisted `view_state`.
**Intended fix.** A future user-initiated "compact" action to remove the stale entries.
**The constraint the fix MUST handle.** Must NOT be automatic pruning — automatic pruning would reintroduce the undo-delete tag-loss that the deliberate membership-retention was designed to prevent.
**Priority / risk.** Not stated as a priority level; the source characterizes the wart itself as "harmless and bounded."
**Done looks like.** Not stated in the source beyond "a future user-initiated 'compact' action."
## Confirm no fight between Design View flags and screenset recall
**Context.** CONTEXT.md's "Open questions to resolve during build" (Design View section): Design View drives the same track flags a screenset recall would drive, and last writer wins between the two.
**The wart.** Not a defect — this is a verification task, not a code change. The open concern is confirming there is no surprising interaction between Design View's flag-driving and an active screenset recall.
**Intended fix.** N/A — no fix is proposed; the task is to confirm no surprising fight between the two mechanisms.
**The constraint the fix MUST handle.** N/A — verification only.
**Priority / risk.** Not stated in the source.
**Done looks like.** Not stated in the source beyond "confirm no surprising fight."
## Spline overlay's drag-off delete margin may be too generous for its box
**Context (what shipped — Θ-W5-T1, spline-egs).** `kCurveDragOffMargin = 24` (`editor_internal.h`) was sized for the velocity-curve popup, whose editing box floats with slack on all sides — the popup's own sheet border sits well outside the box, so 24px of overshoot before a drag-off delete arms is comfortably inside the sheet. The Spline EG overlay reuses the same constant and the same drag-off-delete logic verbatim (`editor_paint_waveform.cpp`), but its box abuts the deck directly with no equivalent slack.
**The wart.** Dragging an overlay contour node toward the bottom of the waveform band and overshooting roughly 24px past the box floor carries the drag into the deck below and arms a delete — a gesture that reads as "drag toward the deck" rather than "delete this point." Mitigations already in place: a WARN paint cue while the drag is armed-to-delete, and `VelocityCurve::deletePoint` unconditionally refuses the two endpoints regardless of margin.
**Intended fix.** Not yet proposed — likely a smaller, overlay-specific margin (or a margin derived from the actual gap between the overlay box and the deck) rather than sharing the popup's constant.
**The constraint the fix MUST handle.** Whatever margin the overlay uses must still comfortably permit an intentional delete-by-drag-off gesture (the design's stated point-removal path) without shrinking it into a hair-trigger; the popup's own margin and delete behavior must be left untouched.
**Priority / risk.** Low, pending Daniel's hands-on assessment. Flagged by code review as an unmeasured UX judgment, not a confirmed defect — whether the overshoot is a real hazard in practice is Daniel's call.
**Done looks like.** Daniel has used the Spline EG overlay hands-on and either confirms the current margin is fine as shared, or a separate overlay margin is chosen and the WARN cue's trigger point is verified to match it.
## Pre-existing staged-envelope-node shadow at zero-attack (AttackEnd on Origin)
**Context (what shipped — Θ-W5-T1, spline-egs).** The staged envelope-node hit-test (`nodeAtPoint`, `envelope_edit.cpp`) and the drawn contour's node hit-test now feed the SAME `WaveformClaim` arbitration slot in `resolveWaveformClaim` (`spline_edit.h`), which resolves competing waveform-band claims — node, crossfade tab, marker column — by smallest nominal target area among the candidates that actually hit. This is the same defect class as the contour-node/marker collision W5 fixed by replacing check-order resolution with that arbitration.
**The wart.** A zero-attack `AttackEnd` vertex is drawn at the same pixel as `Origin` (the envelope's non-draggable start anchor), which for an AHD envelope sits at the start marker's frame. Because a node's nominal pick-box area is smaller than the marker's full-height grab-column area, and `resolveWaveformClaim`'s rule is "smallest area among hit candidates wins," the draggable `AttackEnd` node still claims the click over the start marker when the two coincide — and, at a loop starting there, over the crossfade tab. Folding the staged pass into the shared arbitration slot did not change this specific outcome, since the rule that decides node-vs-marker priority is unchanged from what the contour-node fix established. `Origin` itself is excluded from `nodeAtPoint`'s candidate set entirely (never draggable, never a hit), so the common case — attack > 0, no coincidence — is unaffected.
**RESOLVED — Γ-W2-T2 (`loop-crossfade-ux`), incidentally.** Giving every mark the cap-grip the crossfade already had is what closed it: the start marker now carries an 11x10 cap in the overlay's top strip, whose nominal area (110) is smaller than the node's fixed pick box (169), so the cap wins the coincident pixel and the marker is reachable again. No priority rule was added and `resolveWaveformClaim` is byte-for-byte unchanged — but the cap slot's own nominal area DID move, from the old clipped-actual measure (60 at frame 0) to the new nominal 110 every cap now feeds it (`markerHandleRect`'s own unclipped area). That move leaves the `cap < node < column` ordering unchanged only because 110 is still under the node's fixed 169 — the outcome held, not the area. Below the cap strip the node keeps the click, which is correct: that is where the node is actually drawn for any non-degenerate envelope. Pinned by `testAMarkCapOutranksACoincidentEnvelopeNodeInTheTopStrip` (`tests/test_spline_edit.cpp`). `Origin` was not touched and `isDraggable`'s shape rules are unchanged.
## Active-bank indicator placement (B4 polish)
**Context.** CONTEXT-ARCHIVE.md's "Open questions to resolve during build" (B4 panel section): forks 1–5 are all settled; one panel-polish detail remains open. Fork 4 already settled that the active-bank indicator must be "visually unmistakable" — only its placement is undecided.
**The wart.** No placement chosen yet among three candidates: per-region headers, a single header readout, or a lit-tab treatment.
**Intended fix.** Not stated in the source beyond the three candidate placements above — the choice among them is the open item. This is explicitly a panel-polish detail.
**The constraint the fix MUST handle.** Not stated in the source.
**Priority / risk.** Not stated as a priority level; the source characterizes this as a "panel-polish detail."
**Done looks like.** Not stated in the source beyond choosing one of the three placement options.
## Confirm the card name strip reads legibly at the shipping cell size (Ψ-W2-T1 DAW verification)
**Context.** Ψ-W2-T1 (`capture-naming`) put the capture's label on the docked panel card,
across the top of the cell, drawn OVER the waveform thumbnail. Review found the strip's
text/primary was measured at ~1:1 contrast against the accent-lime waveform fill at the
shipping 140×84 cell size — a loud capture's peak reaches into the strip on 12 of its 13
rows — and remediated it with a bg/base scrim behind the name (`kCardNameScrimAlpha`,
`core/ui/theme.h`) sized so the composite clears the WCAG 4.5:1 body floor against both the
bare fill and bare bg/cell (pinned in `test_theme.cpp`).
**The wart.** The floor math is verified; the actual on-screen read is not. No `[verify —
DAW]` deferral was filed for this track's acceptance criterion ("the panel card shows the
name") when it landed, unlike the sibling Ψ tracks.
**Intended fix.** N/A — no code change. Daniel views the docked panel with real captures
(quiet and loud material, long and short names) and confirms the name reads over the
waveform at the shipping cell size.
**The constraint the fix MUST handle.** N/A — verification only.
**Priority / risk.** Not stated. The math clears its floor with real margin (see
`testCardNameScrimClearsBodyFloorOnItsWorstBackground`), so this is a confirmation step,
not a suspected defect.
**Done looks like.** Daniel confirms the card name reads legibly over both quiet and
loud waveform material at the shipping 140×84 cell size, or a follow-up adjusts the scrim
alpha and this entry is re-filed against the new value.
## A realtime capture interrupted by a project switch leaves an untracked file behind
**Context (found by the tracking-consolidation review, 2026-07-30).** `DriveRealtimeCapture` detects that the active project is no longer the one the in-flight capture belongs to, aborts the backend, and drops the handle. On a `Done` abort the backend has *already* moved the recorded WAV into the **original** project's bank folder (`capture_realtime_finalize`), so a file the tool created exists with no bank entry and no ledger record.
**The wart.** This is the one hole in "no silent gaps": a system-created file that is never recorded. It is in the safe direction — an untracked file is foreign, so prune will never reclaim it — but it is permanent, and the bank folder grows by one orphan per interrupted record.
**Intended fix.** Record the birth against the project the capture belongs to. Neither half is available at the switch point: `session`'s ledger and `saveToActiveProject` both target the *active* project, which is by definition the wrong one here.
**The constraint the fix MUST handle.** Writing the record into the now-active project would attribute another project's file to it — a worse error than the gap, since prune would then consider deleting a file it does not own the folder for. Deleting the stranded file instead was considered and rejected: it is the user's just-recorded audio, and prune is the system's only deletion authority over bank-folder bytes (`shell/persist/CLAUDE.md`) — a shell self-cleanup exemption covers transient scratch, not a finished recording. The fix therefore needs a deferred write against a *named* project (or a re-entry into the original project on the next poll), not a change at the abort site.
**Priority / risk.** Low / deferred. Mitigated in the meantime: the console message names the stranded file's project-relative path, so the operator can recover or remove it rather than discovering it later as an unexplained orphan.
**Done looks like.** Switching projects mid-record leaves the recorded file with a ledger record in the project it belongs to, so a later prune of that project can reclaim it normally.
## ~~Raise the stage-time ceiling above 2 s for long-decay sound design~~ — SCHEDULED, no longer deferred
**This entry is discharged into `docs/PLAN.md` at Γ-W1-T1 and is retained only as a pointer.** Daniel reversed Γ-F3 the same day he ruled it (2026-08-01): *"extend the stage lengths to 10s."* `kEnvTimeMaxSeconds` / `kGateStageMaxSeconds` move **2.0 → 10.0 in Γ-W1-T1**, beside the taper work rather than after it.
**Why the reversal, since the deferral's reasoning was sound.** The deferral said the right time to judge a 5× range change is with the new taper in the DAW under the hand. What changed is not that judgement but the **cost of waiting**: Ruling 1 schedules VST3 parameters inside the same phase (Γ-W4-T1), and a range endpoint is part of the host-facing normalization exactly as much as the curve between the endpoints is. Raising the ceiling is free this wave and permanently expensive four waves later — the same one-way door `docs/product/parameter-automation.md` §4 states for the taper itself, and §8 sweeps for exhaustively.
**What this entry contributed, and where it now lives.** Its two prerequisites (the log taper; `resetDeckParam` bypassing the taper, since 2.0 is a power of two and 10.0 is not) were already in Γ-W1-T1 and are now load-bearing rather than incidental. Its named hard part — *"the constant change is trivial; keeping the drawing legible is not"* — is now in-scope design work, specified at `docs/product/instrument-control-surface.md` §4.3.1: at 10 s a 30 ms attack is 0.3 % of the AHDSR schematic's stage domain, and the answer is to make the schematic axis **be** the taper, so a node's position within its stage slot is its knob's needle position.
**Nothing here is actionable as a TODO.** Delete this entry when Γ-W1-T1 lands.
## The editor's drag state machine has no seam, and `reasampler_editor.h` is near the ceiling
**Context (Γ-W3, meter re-review).** `reasampler_editor.h` stands at **564 lines** against the
~600-line ceiling — 36 lines of margin — and it keeps growing because every new surface on the
Sample face adds its transient state there. The obvious seam is the drag state machine: `drag_`
plus the per-gesture anchors it is read against.
**Why it was declined rather than taken.** `drag_` has **42 references across 13 shell TUs**
(measured over `src/shell/instrument/*.cpp`; the declaration in the header is additional). Of
the six input TUs, three write it and branch on it (`editor_input`, `_waveform`, `_curve`) and
three only write it (`_chrome`, `_browse`, `_deck`) — which is what makes the anchor invariant
observed rather than enforced. Extracting it is a real refactor of the editor's input half, not
a header move — and doing it inside a wave whose subject is the MASTER deck would have put an
unrelated high-blast-radius change in the same diff. Declining was right; leaving it unrecorded
was not.
**The shape a fix would take.** A `DragState` type owning the kind plus its anchor payload,
with the input TUs mutating it through named transitions rather than assigning `drag_` and its
anchors independently — which is also what would let the invariant "an anchor is only readable
while its own `DragKind` is in flight" be enforced rather than observed. `editor_interaction.h`
already holds the `DragKind` vocabulary and is the natural home.
**Priority / risk.** Low, but the margin is the clock: the next surface that adds two members to
the header takes it over the ceiling, and at that point the seam gets chosen under time pressure
by whoever is unlucky. Take it before that, not after.
**Done looks like.** `reasampler_editor.h` is back under the ceiling with room; no TU assigns
`drag_` and an anchor as two independent writes; and the transitions are named where the
`DragKind` catalogue already lives.
## `Sample::sourceMode` has no value meaning "produced by the instrument"
**Context (what shipped — Ξ-W2-T1, resample-bake-chain).** A resample bake's landed
`Sample` entry (`bake_land.cpp`) never sets `sourceMode`; it is left at the struct
default (`SourceMode::MasterMix`) rather than recording that the entry's audio came
from the instrument's own offline render, not from a capture backend.
**The wart.** A baked capture is indistinguishable, by `sourceMode`, from a master-mix
render — the bank has no way to tell "this file was produced by ReaSampler 9000" from
"this file was rendered off the master bus."
**Intended fix.** Add a `SourceMode` value for instrument-produced audio and set it at
the one landing site.
**The constraint the fix MUST handle.** `bank_model.cpp`'s deserializer rejects any
`sourceMode` value outside `MasterMix(0)..Realtime(5)` by failing the whole bank
blob's parse (`parseSample` returns `false`), not just that one field — so appending a
new enumerator is a forward-incompatible bank-format change: an older extension build
reading a newer project's bank would refuse to load it entirely. This needs its own
decision (a version-gated field, or accepting the compatibility cost) rather than a
one-line enum append.
**Priority / risk.** Low / deferred. Logged at Ξ-W2-T1's review rather than folded in.
**Done looks like.** A baked capture's `sourceMode` reads as instrument-produced, and
the compatibility question (how an older build reads a bank containing the new value)
is answered rather than left to fail closed by accident.
## `instrument_bake` doubles peak memory on the WAV build
**Context (what shipped — Ξ-W2-T1, resample-bake-chain).** `runBake` (`instrument_bake.cpp`)
copies the render's interleaved `float` buffer (`BakeAudio::interleaved`, `AudioSample
= float`) into a `std::vector<double>` before handing it to `buildFloat32Wav`, which
takes doubles and narrows back to float for the bank's 32-bit-float WAV contract.
**The wart.** The copy roughly doubles peak memory for the bake — an 8-byte double
holding a value that started and ends as a 4-byte float — for the duration of the WAV
build on a large bake.
**Intended fix.** Either give `buildFloat32Wav` (or a sibling entry point) a
`float`-input overload so the bake path narrows nothing it doesn't already own in
`float`, or narrow lazily during the WAV build instead of pre-copying the whole
buffer.
**The constraint the fix MUST handle.** `buildFloat32Wav`'s `double` parameter is
shared with every other caller in `core/capture/wav_codec`; a fix must not change
those callers' contract or add a second WAV-building code path to maintain.
**Re-confirmed still accurate (2026-08-02), after the mono-collapse landing touched
`wav_codec` adjacent to this site.** `applyMonoCollapse` operates on the staged bytes in
`bake_landing.cpp`'s `prepareLanding`, upstream of and unrelated to `runBake`'s
`std::vector<double>` copy in `instrument_bake.cpp`; `buildFloat32Wav`'s signature is
unchanged. The wart stands exactly as described above.
**Current blocker.** Not taken this wave because `instrument_bake.cpp` is being edited
by a live VST3-parameter track.
**Priority / risk.** Low / deferred. Logged at Ξ-W2-T1's review; correctness is
unaffected, only peak memory on a large bake.
**Done looks like.** A bake's peak memory no longer includes a full double-precision
copy of the rendered buffer, with `buildFloat32Wav`'s other callers unchanged.
## The deck layout rework — SPECCED, and the original shape SUPERSEDED
**Status (2026-08-01): no longer a deferral. The design notes Daniel owed this entry have
arrived, and they change the shape.** The rework is specced in
`docs/product/instrument-control-surface.md` §1 and sequenced as **Phase Γ** in
`docs/PLAN.md`. This entry is retained only until that work lands, because one loose end
below (the Θ-W4-T2 acceptance criterion) still needs an explicit disposition.
**What was superseded, and confirmed superseded by Daniel.** The original entry recorded a
directive of Daniel's for **one row of much *taller* decks with knobs stacked *within* a
deck** (his example: the filter's static knobs above its envelope knobs). **The new framing
replaces that.** The decks stay **single-height with knobs side-by-side**; what becomes
one row is the **sound** category (PITCH/RATE, FILTER, VELOCITY, VOICE), with the three
envelope decks on a second **contour** row and MASTER as a double-height deck spanning both.
The within-deck stacking idea is retired, not deferred.
**The measured-geometry block that used to live here has been deleted, not moved.** It was
taken at the 840 px floor with `kDeckCellW = 48` and is wrong twice over — Θ-W6-T1 changed
both the floor (980) and the cell metrics (60 × 74). The current, re-derived geometry — every
group's width, both row totals, and the resulting 1198 × 680 floor — is the table in
`docs/product/instrument-control-surface.md` §1.2. **Do not resurrect the old numbers.**
The unresolved 864-vs-872 px VELOCITY↔VOICE adjacency-threshold discrepancy is retired with
them; it was measured against a layout that no longer exists.
**The one live loose end.** Θ-W4-T2's acceptance criterion *"VELOCITY sits immediately to
the left of the VOICE group"* is not met at the default window size today. Under the new
layout it **is** met by construction — row 1 is PITCH/RATE, FILTER, VELOCITY, VOICE, in that
order, at every window width — so the criterion is satisfied rather than retired. Confirm it
when Phase Γ-W3 lands and remove this entry.
**Done looks like.** Phase Γ-W3 (`deck-reflow`) has landed; the VELOCITY↔VOICE adjacency
criterion is confirmed met at the floor width; this entry is removed.
## The AA waveform stroke's cost on the docked bank panel's card thumbnails
**Context (what shipped — Θ-W6-T1, legibility-and-antialiasing).** The antialiasing
audit fixed the min/max waveform column plot by adding an AA `LICE_FLine` stroke across
each column's extremes, on top of the existing fill (`draw_kit.cpp` `drawWaveform`).
`drawWaveform` is shared by the editor's hero waveform lanes, the docked bank panel's
card thumbnails, and the browse cards — the stroke lands on all three.
**The wart.** Measured cost (Release, MSVC 14.44, real LICE, 24 stereo cards ×
136 columns = 6528 columns): fill alone 0.070 ms per full-grid repaint, fill+stroke
0.48 ms — the stroke adds ~0.41 ms, about 2.5% of a 60 Hz frame. At card-thumbnail
scale the added smoothness is far less visible than on the editor's hero lanes, so the
cost is paid on every repaint of every card for a benefit concentrated in one consumer.
**Intended fix.** The identified cheap lever: skip the stroke below a card-sized box
and keep it only on the editor's hero lanes.
**The constraint the fix MUST handle.** Not done, because it is a product call about
where the comb artifact — the min/max column plot's jagged outline — actually reads
badly enough to matter, not a performance-forced decision (2.5% of a frame on
hover/scroll/drag repaint, not a continuous cost, is not itself disqualifying).
**Priority / risk.** Low. The measurement is a one-off scratchpad number
(`docs/product/visual-design-language.md` §8), not a standing regression guard —
re-measure before relying on it again.
**Done looks like.** A size threshold (or explicit per-consumer flag) below which
`drawWaveform` skips the AA stroke, with the panel/browse cards confirmed still
readable and the editor's hero lanes unchanged.
## High-DPI host scaling is unverified (distinct from the antialiasing audit)
**Context (what shipped — Θ-W6-T1, legibility-and-antialiasing).** The antialiasing
audit (item 13) confirmed every drawn surface renders smooth at 100% scale — the
disposition table in `docs/product/visual-design-language.md` §8 is the record. That
audit is about rasterization quality at the pixel level the plugin already draws at;
it says nothing about what happens when a host scales the plugin window itself.
**The wart.** Nothing in the instrument implements `IPlugViewContentScaleSupport`. A
host that applies DPI scaling to the plugin window resamples the already-rasterized
output rather than asking the plugin to redraw at the target resolution — every AA
guarantee the audit just confirmed (and the piano-key uniform-width guarantee, §8.1)
holds only at the client-pixel level the plugin itself draws, not above it.
**Intended fix.** Not proposed. Implementing `IPlugViewContentScaleSupport` (or
confirming the host compositor's resampling is acceptable without it) is the shape of
a fix, not yet scoped.
**The constraint the fix MUST handle.** Not yet known — no design work has started.
**Priority / risk.** Not stated. Recorded as a gap, not a defect: no host behavior has
been observed to be wrong, only unverified.
**Done looks like.** Either `IPlugViewContentScaleSupport` is implemented and the
AA/uniform-width guarantees are re-verified at a scaled client size, or a decision is
recorded that host-side resampling of the rasterized output is an accepted tradeoff.
## The analytic stroker's scaled fallback path is unexercised
**Context (what shipped — Θ-W7-T1, arc-and-spline-aa).** `blendCanvas`
(`shell/instrument/editor_stroke.cpp`) guards against `LICE_EXT_GET_SCALING` being
active by falling back to a per-pixel `LICE_PutPixel` path, because the primary raw-bits
path derives its geometry from logical width/height while writing through
`getRowSpan()` — under an active scale that would misplace the stroke or write past the
DIB allocation.
**The wart.** Nothing calls `SET_SCALING` today, so the fallback path never runs. Under
an active scale it would rasterize the coverage mask at *logical* resolution with each
logical pixel expanded to a scale-sized block — geometrically correct but blocky rather
than resolution-independent. This connects to the already-filed high-DPI host-scaling
deferral above; cross-referenced here rather than duplicated.
**Intended fix.** Not proposed — same shape as the host-scaling deferral above:
implementing (or verifying) genuine scale-aware rasterization is the shape of a fix, not
yet scoped.
**The constraint the fix MUST handle.** Not yet known — no design work has started, and
none can usefully start before the host-scaling deferral above is resolved, since that
is what would first exercise this path.
**Priority / risk.** Low / deferred. Recorded as a gap, not a defect: the fallback is
guarded, correct-but-blocky rather than wrong, and unreached by anything in the tree
today.
**Done looks like.** Either the fallback path is exercised under a genuinely scaled
bitmap and confirmed to place the stroke correctly, or it is redesigned to rasterize at
physical rather than logical resolution once `IPlugViewContentScaleSupport` (or
equivalent) makes scaling real.
## The loop intrinsic is folded twice: the bank blob and the instance ref can skew
**Context (what shipped).** Two call sites answer the same question — "does this capture
have a sustain loop, and where?" — by different routes, and both are load-bearing:
- `ReaSamplerEditor::pickedMarkers` (`shell/instrument/editor_session.cpp`) resolves the
intrinsic from the **live bank blob** first (`selectSample`), falling back to the
instance-owned `SampleRefs` only when the blob is unreadable, then lets
`params_.loopOverride` supersede it.
- `ReaSamplerProcessor::reloadInstrument` (`shell/instrument/processor_reload.cpp`)
resolves it from the **instance ref** via `resolveCapture`, which is the one
override-beats-intrinsic fold, and that is what the bake renders and what
`bakeWindowNeedsHold` is ultimately asked about.
**The wart.** The two can disagree whenever the bank blob's loop for a capture differs
from the copy in the instance's own refs table — a recapture that moved the loop points,
a hand-edited blob, or an instance that predates the current bank state. The face then
draws (and the Hold predicate answers about) one loop while the engine plays another.
**Pre-existing.** This split predates the derived-bake-window work; the bake-Hold
predicate is only a new *consumer* of `pickedMarkers`, not the origin of the divergence.
**Intended fix.** Route `pickedMarkers` through `resolveCapture` so both sites share the
one fold, as the bank/refs paths already do elsewhere.
**The constraint the fix MUST handle.** `pickedMarkers` runs on the editor's mouse-down
arbitration path (every waveform click, not just marker grabs) and deliberately skips its
bridge read once an override is set; a unified fold must not put a bank read back on that
path. It must also keep the browser-source semantics: the bank is where a *new* capture's
intrinsics come from, the refs table is where the *loaded* one's live.
**Priority / risk.** Low. Needs a recapture-moved-the-loop scenario to observe, and the
failure is a mis-drawn marker or a spuriously shown/hidden Hold knob, not bad audio.
**Done looks like.** One fold answers the intrinsic for both the editor's markers and the
engine's reload, with a test that moves the bank's loop out from under a loaded instance
and shows the two agreeing.
## `ingestHandleSectionCommand` has no unit test
**Context (what shipped — Ψ-W1-T3, media-explorer-section).** The Media-Explorer
import now dispatches through two hooks — `ingestHandleCommand` (Main,
`"hookcommand"`) and `ingestHandleSectionCommand` (Media Explorer,
`"hookcommand2"`). Both live in `ingest.cpp`, which compiles straight into the
`reaper_reasampler` MODULE target.
**The wart.** No `shell/` translation unit in this repo has a test target — every
`<module>_tests` executable is a `core/` pure-module target. `ingestHandleSectionCommand`
is a two-line command-id comparison; correctness here rests on code review, not CTest.
Review verified this constraint is real and the deferral correct.
**Intended fix.** Make `action_registry` a linkable library and give it the repo's
first `shell/` test target, driven by a fake `reaper_plugin_info_t`. Its own header
(`reaper_plugin.h:153-172`) shows `Register` is a plain member-function pointer on the
struct, not a REAPER API pointer resolved through `REAPERAPI_LoadAPI` — a fake instance
needs no live REAPER process to exercise `rec->Register(...)` calls. Once
`action_registry` is test-covered, move the Media-Explorer section registration into it.
**The constraint the fix MUST handle.** The extraction alone buys nothing:
`action_registry` has no test target today either, so lifting `ingestHandleSectionCommand`
into it without also standing up the test target just relocates the untested code. The
same follow-up could collapse `ingest.cpp`'s `ingestRegisterActions` hand-rolled `command_id`+`gaccel`
pair onto `action_registry::registerAction`, which already does exactly that dance for
the Q-W6 table.
**Priority / risk.** Low / deferred. `ingestHandleSectionCommand` is a two-branch
comparison, reviewed and correct at this scope; the gap is the missing test seam, not a
known defect.
**Done looks like.** `action_registry` is a linkable library with its own `shell/`-first
CTest target driven by a fake `reaper_plugin_info_t`; the Media-Explorer section
registration and `ingestHandleSectionCommand` move into it and gain unit coverage; and
`ingest.cpp`'s own `command_id`+`gaccel` registration collapses onto
`action_registry::registerAction` where the shapes match.
## The `&128` multi-track output shape is still DAW-unobserved, and a refusal now rests on it
**Context.** The multi-track TRACK capture no longer lands one track's audio under an
`Ok`: `renderOffline` refuses every selected-tracks render covering more than one track,
both scopes, naming the way out (`render_settings::isMultiTrackStemRender` /
`multiTrackRefusalMessage`). What did NOT change is the evidence: the per-track-output
reading of `&128` is still INFERRED from the SDK header documenting the single-file bit
`&(4<<16)` for item/razor sources only. It has never been observed in a DAW.
**The wart.** The refusal is therefore as unverified as the defect it closes. If REAPER
in fact sums a multi-track `&128` render into the single literal `RENDER_PATTERN`, the
refusal costs a working capture — a user who selects two tracks and captures gets a
message where a correct summed file used to land.
**Intended fix.** Run the observation in `docs/verify-track-scope-multitrack.md` §3 (a
hand-driven Render dialog, source "selected tracks via master", one literal filename, two
tracks selected — then count the files REAPER writes). If it comes back "one file per
track", nothing to do and the inference is retired into fact. If it comes back "one
summed file", the refusal is over-strict for the TRACK scope and should be narrowed back
— and the ITEM-scope half is then an OPEN question, not settled: a full-extent item
capture already sums a multi-track item selection via `&32|single-file`
(`test_render_settings.cpp`'s `testMultiTrackStemRenderIsNamedForRefusal`), so if `&128` also sums, a ranged item capture
routed through it sums too, and keeping the item refusal in that branch would make item
scope inconsistent with itself across the range boundary (full-extent sums, ranged
refuses, same scope). Whether that inconsistency is acceptable or the item refusal should
narrow too needs its own look at that point — not decided here.
**The constraint the fix MUST handle.** Narrowing the refusal must keep the ITEM scope
refusing, must keep `renderOffline` the single seam (so a recipe replay cannot diverge
from a fresh capture), and must not re-open the collapse for any caller that reaches
`&128` later — the predicate is keyed on the render source precisely so new callers
inherit it.
**Priority / risk.** Low and bounded either way: the current behavior refuses rather than
lands wrong audio, so the cost of being wrong here is a refused capture, not a bad one.
**Done looks like.** The `&128` multi-track output shape is DAW-observed and written into
`src/shell/capture/CLAUDE.md` as fact rather than inference, and the refusal is either
kept as-is or narrowed to the item scope with that observation cited.
## A `SelectedItems` recipe replays against whatever items are selected then
**Context (surfaced by Ψ-W1-T1, capture-range-exactness).** `RunRecaptureFromSource`
rebuilds a `CaptureRequest` from the recorded `CaptureRecipe` and resolves its source
tracks by GUID. `renderOffline` engages `RenderTrackSelection` only when the recipe's
source mode is `SelectedTracks`, which is what makes a ranged item capture and a
track capture replay against their recorded tracks rather than the live selection.
**The wart.** A recipe whose source mode is `SelectedItems` — every pre-fix item-scope
capture, and every post-fix full-extent one — renders `&32`, which prints whatever
items happen to be selected when the replay fires. The recorded recipe therefore does
not fully determine the audio it reproduces, which is what "recapture from source"
promises.
**Intended fix.** Not proposed. The recipe stores tracks and a range; it carries no
item GUIDs, so no guard on the shell side can reconstruct the item selection from
what is recorded. Closing it means widening `CaptureRecipe` (a wire-format change with
a version rung) or re-sourcing full-extent item captures through the tracks render too,
which would drag them onto the isolation path for no gain.
**The constraint the fix MUST handle.** Widening the recipe must keep every already-
persisted recipe readable, and must not make a replay depend on items that no longer
exist — a deleted source item has to degrade to a stated refusal, not a silent
substitution.
**Priority / risk.** Pre-existing; not introduced or worsened by the range-exactness
work. Harmless when the user re-runs a recapture with the same items still selected,
wrong when they do not.
**Done looks like.** A `SelectedItems` recapture either reproduces its recorded audio
from the recipe alone, or refuses with a message naming what the recipe cannot pin
down.
## An overlapping item on the source track itself is not isolated from a ranged item capture — DECIDED, not deferred
**Context (surfaced by Ψ-W1-T1, capture-range-exactness).** The re-source to the
selected-tracks render (`&128`) needed transient upstream silencing so an item capture
did not also print folder children and receives; `render_isolation` (`UpstreamIsolation`)
covers both. A third widening exists in the same shape: a non-selected item on the
SAME track that overlaps the requested range is now audible in the render, where the
pre-fix `&32` selected-items source excluded it by construction (that source only ever
prints the selected items).
**This is a decision, not a gap.** `src/shell/capture/CLAUDE.md` states the reasoning in
full and it is not repeated here: `UpstreamIsolation`/`render_selection` silence and
select TRACKS because the recipe that replays a capture stores tracks and a range, never
item GUIDs — a mute plan keyed to today's overlapping item could not be recomputed at
replay time, so muting items would make the capture stop reproducing itself. The named
candidate (a) in `docs/PLAN.md` §Ψ-W1-T1 carried exactly this semantic edge; it was
weighed against candidate (b) (an item-bounds render with a derived start time) and (a)
shipped with the edge accepted rather than closed.
**Priority / risk.** Low in the common case (one item per track over the captured range is
the normal shape); a project with deliberately overlapping items on one track is the one
that surfaces it, and the practical mitigation is unchanged from before this track:
select/move the neighbour, or capture at track scope instead.
**Done looks like.** Nothing to do — recorded so a future reviewer does not read the
non-isolation as an oversight and re-propose closing it against the recipe's stated
tracks-and-range-only shape.
## A 0-byte render can still pass every gate under Auto/Manual tail (closed)
**Context (surfaced by Ψ-W3 review).** `OfflineRenderBackend::capture`'s exists-check
passes for a 0-byte file, and the bounds gate used to fire only when `expectedFrames > 0`
— an invalid/empty layout read `expectedFrames == 0` and skipped the gate rather than
refusing, so a 0-byte render reached `stampCaptureSample` and landed as
`CaptureStatus::Ok` with an empty `contentHash` and `channelCount == 0`.
**Narrowed, then reopened as an asymmetry.** `shell/capture/render_bounds_gate` was
first changed to refuse an unmeasurable render (invalid layout, or a layout declaring no
sample rate) instead of skipping it — but that gate only ever judges `TailMode::None`,
so a 0-byte render under Auto/Manual still landed as `Ok`, while `None` now refused and
quarantined the identical file. The two tail modes disagreed on a defect neither should
accept.
**Closed.** `capture.cpp` now checks `checkRenderedFileNotEmpty` right after the
exists-check, on every tail mode, before the `TailMode::None`-only bounds gate runs —
a 0-byte render is refused and quarantined identically regardless of tail mode. The
refusal reuses `CaptureStatus::BoundsMismatch` rather than minting its own status; the
earlier note here preferred a distinct status, and that preference is unresolved, not
withdrawn.
## `renderHonoredBounds`'s one-frame tolerance is empirical, not proven
**Context.** The millisecond-floor defect that motivated this gate is closed
(`docs/COMPLETED.md`), but the gate itself — `render_window.h`'s
`renderHonoredBounds` — carries a one-frame tolerance that carried through the fix
unchanged and was never itself proven.
**The wart.** A renderer that resolves the window's two edges by DIFFERENT
conventions can sit two frames from `frameCountFor`'s answer on a
correctly-honored render. That cannot account for the 8- and 38-frame shortfalls
the floor produced (`docs/COMPLETED.md`), so it was not the cause of those
refusals — but it means a future one- or two-frame refusal may be the gate's own
edge convention rather than a real defect.
**Intended fix.** Not proposed. Widening the tolerance is a precision-invariant
decision, not a bug fix, and was deliberately not taken on speculation.
**Priority / risk.** Low. Nothing to date implicates the tolerance itself;
recorded so a future narrow refusal is investigated rather than assumed to be
the same floor.
**Done looks like.** Either the tolerance is confirmed correct by a DAW
observation that isolates edge-convention behavior from bounds-floor behavior,
or it is widened with the reasoning recorded.
## `TailMode::Auto` and `Manual` have no automatic bounds observation
**Context.** `render_bounds_gate.cpp`'s `checkRenderedBounds` returns early for
anything but `TailMode::None`, so the millisecond-floor fix (`docs/COMPLETED.md`)
was measured only against `TailMode::None` — Auto and Manual were never
observed, before the fix or after it.
**The wart.** The inference that Auto/Manual are fixed too is sound — same
bounds path, same floor, same fix — but it is an inference, not a measurement.
`checkRenderedFileNotEmpty` runs on every tail mode and still catches a 0-byte
render, but that is the ONLY automatic bounds signal Auto/Manual get; a
floored or otherwise short-but-nonzero render under either mode would land as
`Ok` with nothing to catch it.
**Intended fix.** Not a code change — a DAW observation. `docs/VERIFICATION.md`'s
"Capture range and bounds" section already carries the manual check: repeat an
off-grid-start capture at Manual over a source loud to the window's end and
check the landed frame count against window + `tailMs`; Auto can't be checked
by count (it trims trailing silence) and needs the null test by ear/inversion
instead.
**Priority / risk.** Low. Both modes share the same bounds path as the
now-fixed `TailMode::None`, so nothing suggests they still floor — but nothing
confirms it either.
**Done looks like.** A DAW-observed Auto and Manual capture, each landing the
window as requested, closes the inference into fact — or surfaces a
mode-specific divergence this entry does not currently know about.
## Floor, ceil and round are not the identity on a millisecond grid point in binary double (caution, not an open question)
A discarded compensation design for the millisecond-floor defect
(`docs/COMPLETED.md`) rested on the premise that a grid-aligned value survives a
bare floor/ceil/round unchanged. That is false in binary double: `1.007 * 1000
== 1006.9999999999999` (floors to 1006, not 1007), and `4.068 * 1000 ==
4067.9999999999995` (floors to 4067, not 4068). The compensation this premise
would have supported is no longer needed — the fix moved the render to a bounds
mode that does not floor at all — so this is not a live open question. Recorded
because it would bite any future millisecond-grid arithmetic that assumes an
on-grid value is safe from a bare floor: `render_window.h`'s own
`isOnMillisecondGrid`/`msFlooredEndFrameCount` already carry the nanosecond
tolerance that handles it correctly on this codebase's side of the boundary; the
trap is for whoever writes the next piece of grid arithmetic without that guard.
## `capture.cpp` is over the ~600-line ceiling — the seam is identified, taking it is blocked
**Context.** Removing the settled bounds experiment's instrumentation (the console
verdict and the three-checkpoint `RENDER_STARTPOS`/`ENDPOS` read-back) brought the file
from 697 to **620 measured lines**, against root `CLAUDE.md`'s ~600-line ceiling. The
seam that entry originally named is gone with the instrumentation; nothing left in the
file is bisectable without cutting load-bearing why.
**The remaining seam is a real responsibility boundary**, and the file header already
names it as two things: `OfflineRenderBackend::capture` (the offline render driver)
versus the four helpers BOTH backends share — `makeUniqueTag`, `captureNameFor`,
`collapseCapturedFileToMono`, `stampCaptureSample` — consumed by `capture_batch`,
`capture_orchestrator`, `capture_realtime_shell`, `capture_realtime_finalize` and
`render_in_place`. Lifting those four into their own TU takes the driver under the
ceiling and gives the cross-backend steps their own home.
**Why not taken.** `src/shell/capture/` has no `CMakeLists.txt` of its own — its sources
are listed in `src/app/CMakeLists.txt`, so a new TU needs an edit there. Forcing the
four helpers into an existing TU instead (orchestrator, realtime finalize) would put
them in a wrong home to dodge one build-file line, which is worse than the overshoot.
## bext TimeReference read-back is not a floor detector (dead end, recorded so it is not re-litigated)
Idea considered and dropped: read a captured file's `BWF:TimeReference` tag back as
independent evidence on the START-edge millisecond-floor question above. `WDL/metadata.h`'s
`WriteMetadataPrefPos` only writes it past its `prefpos > 0.0` guard (`:1301`) — that guard
alone is enough to rule the approach out. One nuance worth recording separately: the
millisecond quantization at `:1382-1383` (`AddMexMetadata`'s `ParseUInt64(val)/1000.0`)
belongs to the MEX caller, not proven to be `WriteMetadataPrefPos`'s own behavior or the
renderer's direct call into it — so even without the guard, a floored bext tag would show
that MEX quantizes, not that the render engine does.
## Split `render_bounds_gate` on the verdict/message vs. filesystem seam
**Context (Ψ-W3 round-two review).** `render_bounds_gate.cpp` mixes pure verdict
composition (frame-count comparison, message text) with filesystem I/O
(`retainRefusedRender`'s `fs::create_directories`/`fs::rename`) in one shell TU. The
verdict half has no REAPER dependency and no filesystem dependency either — it could be
`core/capture`, unit-tested directly instead of only through the pure `render_window`
functions it calls. The reviewer's suggested split: verdict + message composition pure
and testable in `core/capture`, leaving only `retainRefusedRender` (and the two thin
`checkRendered*` entry points that call it) in `shell/capture`.
**Why deferred.** Out of scope for the dispatch that surfaced it — a structural split,
not the bug fix in front of it.
**Filed also because it's already slightly wrong today.** `render_bounds_gate.cpp`
touches no REAPER API (it is `<filesystem>` + the pure `core/capture` modules only), so
`src/shell/capture/CLAUDE.md`'s "this directory is the REAPER API surface only" scope
line no longer describes it — one more small argument for eventually moving the
REAPER-free half to `core/capture`, separate from the untested-filesystem-code gap
above.
**Done looks like.** `core/capture` owns a pure `checkRenderedBoundsVerdict`-shaped
function under a `<module>_tests` target with no REAPER, no VST3 SDK, and no
filesystem includes; `shell/capture/render_bounds_gate` shrinks to the file-move and
the two callers' plumbing.
## The capture path ignores `saveToActiveProject`'s return at four sites
**Context.** `saveToActiveProject()` returns false for exactly two reasons — no active
project, or an unsaved one — and in both cases NOTHING was written. Four capture sites
discard that return outright: `capture_orchestrator.cpp`'s `RunCapture`, `capture_batch.cpp`'s
`RunBatchCaptureItems` and `RunBatchCaptureRazor`, and `realtime_lifecycle.cpp`'s `CommitRealtimeResult`.
**The wart.** A capture on an unsaved project renders the file into the bank folder, adds
the `Sample` to the in-memory book, records a birth record in memory — and loses all three
on reload. The bytes stay on disk with no index entry and no persisted ledger record, so
they are a foreign file prune will never reclaim (an unrecorded file is untouchable by
design — `core/tracking/CLAUDE.md`). Nothing is printed. The bank-op family already reads
this return and discards its undo point on a false; the capture family does not read it at
all.
**Why filed, not fixed.** Pre-existing, and the right answer is a product decision this
dispatch had no mandate for: refuse the capture up front, keep it and warn, or prompt for
a Save-As (the bank ops chose "quiet persist by design, deliberately no Save-As prompt" —
whether capture should follow is a separate call).
**Done looks like.** A capture attempted with no saved project either does not write bytes
at all, or writes them and says so in a sentence naming what will not survive a reload —
and the choice between those two is recorded rather than implicit.
## `panel_input`'s wheel handler persists the whole book per wheel message
**Context.** `panel_input.cpp` — `handleWheel` calls `markTailDirty()` on every wheel
message that actually moves `manualMs`, while the pointer is over the footer in Manual
mode. (It coalesces sub-notch deltas within ONE message and no-ops at a bound, so the
count is wheel messages that changed the value, not raw notches.)
**The wart.** `markTailDirty` is `saveToActiveProject()` — a full `BankBook` serialize plus
six ext-state value writes on the UI thread — for a setting that is one number. A flick
over the footer is a dozen of them in a few hundred milliseconds. Disproportionate rather
than incorrect: no guardrail is violated (this is nowhere near the two named hot paths),
and the writes are idempotent.
**Intended fix.** Coalesce: mark dirty and let one timer tick flush, the same shape the
panel already uses elsewhere for repaint batching.
**Done looks like.** A continuous wheel gesture over the footer produces one persist, and
the value that lands is the gesture's final one.
## `RunCaptureItemAssign`'s undo point does not follow the pattern its comment claims
**Context.** `capture_orchestrator.cpp`'s `RunCaptureItemAssign` states that the action follows
the bank-op family's discard-on-unsaved pattern.
**The wart.** It does not: `RunCaptureItemAssign` records the undo point unconditionally whenever
`sampleId` is non-empty, and never consults the persist's return at all. So on an unsaved
project it records an undo point for ext-state that was never written — the empty
no-effect entry `persistBankOp`'s guardrail exists to avoid. The comment describes the
intended behavior, not the code.
**Why filed, not fixed.** It is one instance of the capture-family gap filed above, and
fixing it alone would leave the other four sites divergent. Fix them together, or explain
in one place why capture differs from bank ops.
**Done looks like.** The comment and the code agree, and the whole capture family answers
the unsaved-project case one way.
## `core/tracking/CLAUDE.md`'s untracked-file enumeration says "reaches the `.rpp`" too loosely
**Context.** `src/core/tracking/CLAUDE.md` §"Invariants" — "No silent gaps — in memory at
creation, on disk at the next save" — enumerates how a created file can stay
untracked, and describes the ledger as reaching the `.rpp` at the following
`saveToActiveProject()`.
**The wart.** `saveToActiveProject()` writes REAPER's IN-MEMORY project state and marks the
project dirty; REAPER writes the `.rpp` on the project's own save, which may be much later
or never. The sentence was already loose before this branch and is not made wrong by it —
but it is the same over-claim ("a write reached the file on disk") the bake's reporting
pass spent several rounds removing from its own sentences, so it should read the same way.
**Why filed, not fixed.** Editing another layer's own CLAUDE.md from a persist-and-report
dispatch is exactly the boundary crossing the per-directory docs exist to prevent. It is a
doc-keeper edit.
**Done looks like.** The enumeration distinguishes "in the project's state" from "on disk
in the `.rpp`", and does not gain a second home for the distinction.
## `view_mode_model.cpp` is over the ~600-line structural bar, and `view.cpp` is close behind
**Context (surfaced by the FX-GUID keying track).** Root `CLAUDE.md`'s structural
heuristics put an ~600-line ceiling on any one file, with a documented responsibility
seam as the required method for splitting it, not an arbitrary bisection.
`src/core/view/view_mode_model.cpp` measures **815 lines** (verified this pass),
up from 715 before the FX-GUID keying track's v2 schema addition made it worse.
**The named seam.** The JSON codec — `serialize()`/`deserialize()` — wants its own
`view_state_codec` TU in `src/core/view/`.
**Why it was deferred, and this reasoning should survive.** `serialize()` is a
`ViewModeModel` member and `deserialize()` a static factory (confirmed:
`std::string ViewModeModel::serialize() const` and
`std::optional<ViewModeModel> ViewModeModel::deserialize(const std::string&)`), both
reaching private state — so extraction needs either a friend declaration or a new
public accessor surface. Doing that in the same commit that changed the byte format
the golden test literals pin would roll a format change and a codec extraction
together, which is the riskier order.
**`src/shell/view/view.cpp` is no longer over the bar.** It measures **594 lines**
(`wc -l`, re-measured after the undo collapse moved one track's whole park/restore —
snapshot, flags and per-FX offline — into `view_fx_park`'s `parkTrack`/
`restoreTrack`). Recorded because the entry above used to name it as a second
over-ceiling file: if it grows again, note that a further seam there is blocked
not by a private-state/friend question but by a build file another team owns —
`src/shell/view/` has no `CMakeLists.txt` of its own today, so a new TU costs one
`target_sources` line in `src/app/CMakeLists.txt` instead.
**Priority / risk.** Not stated.
**Done looks like.** `view_mode_model.cpp`'s JSON codec is extracted into its own
`view_state_codec` TU (with the friend/accessor question resolved deliberately, not
sidestepped), dropping the file under the ~600-line ceiling.
## FX-GUID stability for the park's restore is unverified in the DAW
**Context.** The Design View park/restore FX keying (`restoreTrack`,
`src/shell/view/view_fx_park.cpp`) rests on `TrackFX_GetFXGUID` returning an identity that
survives a chain reorder while a track is parked. SWS issue #802 reports that after
`SNM_MoveOrRemoveTrackFX` reorders a chain, the FXID lines do not follow the plugin
(`SNM_PreObjectState()` → `RemoveAllIds()`) — if that still holds, an SWS-driven
reorder while parked produces wrong-plugin restores or mass drops, which is the exact
operation this keying targets.
**What must be checked.** Native drag-reorder, an SWS move, save/reload, and two live
instances of the same plugin.
**Already flagged in code — this entry is the tracked home, not a restatement.**
There is a `[verify — DAW]` marker at `fxGuidString` in `src/shell/view/view_fx_park.cpp` and
a note in `src/shell/view/CLAUDE.md`'s Gotchas; point at them rather than restating
them in full.
**Priority / risk.** Not stated.
**Done looks like.** Native reorder, SWS reorder, save/reload, and a
two-instance-of-the-same-plugin case are each observed in a live REAPER session, and
either the identity is confirmed to survive all four, or a degradation is found and
the keying is amended.
docs/VERIFICATION.md
+226
View File
@@ -0,0 +1,226 @@
# DAW verification — post-1.0 work on `dev`
Checks for Θ, Ξ, Ψ, Ε, Ρ, Γ, and Ω work that no unit test can close. Build **Release**, install into
`UserPlugins/`, restart REAPER. Panel tail toggle = **None**, project rate 48000, unless a check says otherwise.
## Precision invariants
- [ ] Dry offline item capture of a 2 s range, re-inserted at its source position, inverted against the source — reads silence (`CLAUDE.md` §"Precision invariants" — "Null test")
- [ ] Run the identical offline capture request twice — the two files are byte-identical on disk (`CLAUDE.md` §"Precision invariants" — "Bit-identical repeats")
- [ ] After any capture, source items and tracks are unchanged: fader, pan, mute, FX bypass, selection (`CLAUDE.md` §"Precision invariants" — "Non-destructive")
- [ ] After a realtime capture, the temp track is gone and every source track's routing is back as it was (`CLAUDE.md` §"Precision invariants" — "Non-destructive")
- [ ] Capture 10.000–12.000 s — card reads 2.000 s / 96000 frames, no leading or trailing silence (`CLAUDE.md` §"Precision invariants" — "Exact bounds")
- [ ] With an FX on the source track: item scope does NOT carry it, track scope does (`CLAUDE.md` §"Precision invariants" — "Capture FX scope")
- [ ] Track scope on a child track with FX, gain, and pan set on the parent and master — neither colors the capture (`CLAUDE.md` §"Precision invariants" — "Capture FX scope")
- [ ] Save, move the whole project folder elsewhere, reopen — every card still resolves and auditions (`CLAUDE.md` §"Precision invariants" — "Relative paths only")
## The decisive observation
- [ ] **Run first.** `docs/verify-track-scope-multitrack.md` §3 by hand, and count the files REAPER writes (`docs/TODO.md` §"The `&128` multi-track output shape is still DAW-unobserved", `docs/COMPLETED.md` §"Ψ-W3-T1", `docs/COMPLETED.md` §"None of the seven is DAW-verified")
- [ ] Two files confirms Ψ-W1-T1 and Ψ-W3-T1 at once; **one summed file invalidates both** — stop and report, the refusal is costing a capture 1.0.0 accepted (`docs/COMPLETED.md` §"None of the seven is DAW-verified")
- [ ] Then walk the rest of `docs/verify-track-scope-multitrack.md` (§1–§2, §4–§7) for the multi-track refusal itself (`docs/COMPLETED.md` §"Ψ-W3-T1")
## Capture range and bounds
- [ ] Over an item much longer than the selection: item scope × time selection, and item scope × razor — each lands exactly the window, not the whole item (`docs/COMPLETED.md` §"Ψ-W1-T1")
- [ ] Same source: track scope × time selection, and track scope × razor — same exact window (`docs/COMPLETED.md` §"Ψ-W1-T1")
- [ ] One razor-union case (two disjoint areas, one track) — lands the requested window, no `ReaSampler capture failed:` line (`docs/COMPLETED.md` §"Ψ-W1-T1")
- [ ] Capture an item whose extent already equals the window — still lands, unchanged (the byte-identity regression floor) (`docs/COMPLETED.md` §"Ψ-W1-T1")
- [ ] **The millisecond floor — SETTLED, nothing to re-run for `TailMode::None`.** The floor lives in the custom-time-bounds field (`RENDER_BOUNDSFLAG=0`), not in the render engine. Two live 48 kHz `TailMode::None` renders on `RENDER_BOUNDSFLAG=2` (time selection, handed over via `GetSet_LoopTimeRange`) came back exact — 97627 frames against 97627 — the second over a window whose START carried a sub-millisecond remainder, with no floored model of that window able to reproduce the count. Time selection is now the only bounds mode a capture can reach; the console verdict line and the `RENDER_STARTPOS`/`ENDPOS` read-back probe that answered this are gone. Full observation: `src/core/capture/render_settings.h`'s `kRenderBoundsTimeSelection`
- [ ] **Still open — Auto and Manual tail.** `checkRenderedBounds` judges `TailMode::None` only (Auto/Manual add frames by design), so the settled result covers those two by INFERENCE, not observation, and the inference rests on an unverified PREMISE too: that the (retired) floor applied to the bounds identically across all three tail modes, and that all three now hand the window over the same way. Neither is measured — both live short renders that settled the bounds mode were `TailMode::None`; no Auto or Manual capture has been observed at all. **On Auto/Manual, the ONLY automatic check left is the 0-byte gate (`checkRenderedFileNotEmpty`)** — there is no automatic bounds signal for those two modes at all until this bullet is closed by hand. What would establish it: repeat an off-grid-start capture at **Manual** over a source that is loud right to the window's end, and check the landed file's frames against window + `tailMs` — a floored edge shows up in that count. **Auto** cannot be checked by count (it trims trailing silence), so it needs the null test by ear/inversion against the source instead
- [ ] `[verify — DAW]` A tail is assumed to render PAST the window end — the SDK header (`:3048`) confirms only that `RENDER_TAILMS` is a length in ms, not that it extends past the end. If that assumption is wrong, a tail capture is silently SHORTER than its window with no detector at all. Report whether either tail capture comes up short against the source
- [ ] A refused render is kept for diagnosis at `<project folder>/reasampler_refused/` (the refusal line names the path; a failed move leaves it unindexed in the bank folder and says so). Delete the folder when done — nothing in the bank references it
- [ ] **If a capture is refused for a short render**, report the refusal line verbatim. A message naming `floored to the millisecond` means the floor is back on a mode measured escaping it; a shortfall of one or two frames with no such sentence may be the gate's own edge-convention tolerance rather than the render (`render_window.h`'s `renderHonoredBounds`)
## Names and channels
- [ ] Capture from a named track — the card reads `<Track> MM-DD HHMM`; capture again the same minute and the second carries an ordinal (`docs/COMPLETED.md` §"Ψ-W2-T1")
- [ ] Capture from an unnamed track, and from a multi-item selection — both readable, `+N` present on the multi (`docs/COMPLETED.md` §"Ψ-W2-T1")
- [ ] Load a named capture into ReaSampler 9000 — the same name shows there (`docs/COMPLETED.md` §"Ψ-W2-T1")
- [ ] The card label stays legible over its scrim at every card size (`docs/COMPLETED.md` §"Ψ-W2-T1")
- [ ] Capture a dead-center mono source — the `.wav` is roughly half the size of the equivalent stereo capture (`docs/COMPLETED.md` §"Ψ-W2-T2")
- [ ] Insert that collapsed file on a stereo track and null it against the source — confirms REAPER sums a 1-channel item at unity (`docs/COMPLETED.md` §"Ψ-W2-T2")
- [ ] Capture a true-stereo source — stays 2-channel, and both it and the collapsed file load into the instrument correctly (`docs/COMPLETED.md` §"Ψ-W2-T2")
## Mode switching
- [ ] Solo tracks in Arrange, switch to Design, solo different tracks, switch back — each mode restores its own solo set verbatim (`docs/COMPLETED.md` §"Ψ-W1-T2")
- [ ] Attempt a mode switch while the transport is playing, then while recording — both refuse, visibly (`docs/COMPLETED.md` §"Ψ-W1-T2")
- [ ] Click the footer mode segment, save, reopen the project — the mode persisted (`docs/COMPLETED.md` §"Ψ-W1-T2")
- [ ] `[verify — DAW]` Reproduce the strand: project with FX in both modes, switch to Design, save, close, reopen, toggle to Arrange. Toggle back and forth several more times — the arrangement's FX must NOT converge on permanently offline/hidden. A track the tool refuses to park is NAMED in the console, and the same refusal is not reprinted on a later reapply unless the refused set changed (`src/shell/view/view_fx_park.h`'s `decidePark` / `reportRefusedParks`)
- [ ] `[verify — DAW]` **ONE switch, ONE point.** In a project with several FX across several tracks, switch modes once and count the undo points REAPER shows (Ctrl-Z tooltip / undo history): expect exactly ONE, `ReaSampler: activate <mode> view` — never two, and never one per FX. Then press Ctrl-Z once: the flags unpark and EVERY FX comes back online, in that single step. Verify the EFFECT, not merely that one entry exists — a mask that failed to pick up `UNDO_STATE_FX` would still show one correct-looking entry while leaving every plugin offline, which reads as a pass and isn't. Then Ctrl-Y: the redo re-parks all of it, also in one step (`src/shell/view/CLAUDE.md` §Invariants — "ONE mode switch is ONE undo point")
- [ ] `[verify — DAW]` **Where the `view_state` lands on undo AND redo, and whether the redo strands a track.** `persistViewState` writes the ext state AFTER `applyMode`'s block closes, so the point never saw the new `view_state` — the undo direction is expected to come out right by position, the redo direction is the open one. Use a project with FX on the tracks that park. After the Ctrl-Z above, read the footer segment: it must show the mode the user came FROM, and a further switch must bank solos under that mode id. Then Ctrl-Y and read it again: if the tracks re-park while the footer still shows the pre-switch mode, the redo restored the stale ext state and model-vs-project is out of step. **Then switch modes ONCE MORE and read the console** — the hypothesised consequence is a `left unparked` refusal line naming those tracks, because the redo-restored model carries no snapshot for a chain that reads parked. A clean switch with no refusal line kills the hypothesis; the line appearing confirms a NEW refusal route and the persist position has to be reopened. Report which, and the footer state at each step. Do NOT fix by moving `persistViewState` inside the block — it can open a modal Save-As (`src/shell/view/CLAUDE.md` §Gotchas)
- [ ] `[verify — DAW]` **No point on open.** Open a project saved in Design mode with every inactive leaf already fully parked (flags AND FX), and check the undo history: the load-tick reapply writes nothing, so it must add NO undo point at all — the `("", 0)` discard form. This only holds when the saved state really was fully parked; a first open after tagging a new leaf, an FX added to a parked track, or a plugin hand-onlined since the last save all have real state to write and legitimately mint one correct point. An entry appearing on a project that WAS fully parked means the discard is not working — and since `mintManagedLanes`' no-op path rests on the same idiom, check that alongside it (`src/shell/view/view.h`'s `applyMintsUndoPoint`)
- [ ] `[verify — DAW]` **The hitch now sits on the switch.** On a project with heavy plugins (convolution, a loaded sampler) across several parked tracks, time the mode toggle: by design the action does not return until every plugin has unloaded/reloaded. Report roughly how long, and whether the UI recovers cleanly afterwards — the whole write phase runs under one `PreventUIRefresh(1)` hold (`src/shell/view/CLAUDE.md` §Invariants — the documented caveat)
- [ ] `[verify — DAW]` **Nested blocks around the FX writes.** Two directions, both undocumented in the SDK header. (a) `render_in_place` calls `applyMode` inside its OWN undo block, so its single `ReaSampler: render selected track to a new track` point should now absorb the reapply's FX moves — run that verb from Design mode over a track with FX and confirm ONE point, not two, and that Ctrl-Z reverses all of it. (b) The inverse: fire a mode-switch action WHILE a switch's plugin loads are in flight (a heavy chain widens the window) — `applyMode` is latched, so the expected outcome is that the second switch is DROPPED entirely and silently; the history must show one point, and the footer must still read the first switch's target. Re-firing it afterwards must work normally. (c) The same window, but let `OnTimer` -> `bankPanelRefresh` -> `mintManagedLanes` run into it: that path is NOT latched and opens a block of its own, so check the history for a split or misordered point (`src/shell/view/CLAUDE.md` §Gotchas)
- [ ] `[verify — DAW]` **The load reapply is never lost to the latch.** Open a project saved in Design mode with heavy plugins on parked tracks (so an apply is long) while another apply can overlap — e.g. trigger a project open from an action fired during a switch. The saved mode must still be applied: the load glue tests `modeApplyInProgress` before spending its one-shot signal and retries on the next timer tick, so a delayed-by-a-tick reapply is a pass and a never-applied one is a failure (`src/app/main.cpp`'s load glue, `src/shell/view/view.h`'s `modeApplyInProgress`)
- [ ] `[verify — DAW]` **A tab switch mid-apply cannot split the block.** `applyMode` pins the project once at entry and threads it through `Undo_BeginBlock2`/`Undo_EndBlock2`/`ValidatePtr2`. With a long switch in flight, switch project tabs (the pump premise makes this reachable) and confirm the undo point lands on the project the switch started in, with nothing written into the other tab (`src/shell/view/view.cpp`'s `applyMode`)
- [ ] `[verify — DAW]` **A→B→A costs two full cycles.** Toggle Arrange→Design→Arrange quickly on a project with heavy plugins: every plugin unloads and reloads twice, where the retired intent queue made a fast double-toggle free. Confirm the END STATE is still correct (every FX online, every driven flag back at its captured value) and report whether the doubled cost is tolerable in practice (`src/shell/view/CLAUDE.md` §Invariants — the A→B→A bullet)
- [ ] `[verify — DAW]` For a track the console names as left unparked, follow the message's recovery IN FULL: re-enable its TCP/mixer visibility, main send and FX enable, **and set every FX in its chain online** (FX enable is the chain bypass — it does not bring an individually offlined FX back). Then switch modes twice: it parks and restores normally, with no further console line. Do the flag half ONLY on a second such track and confirm it is still refused — the FX half of the trust test, and the reason the message spells the step out (unit-tested only as a decision, never against a live chain)
## Actions and drops
- [ ] Add the import action to a Media Explorer toolbar and fire it from there — it imports (`docs/COMPLETED.md` §"Ψ-W1-T3")
- [ ] Fire the existing Main-section import binding — still works (`docs/COMPLETED.md` §"Ψ-W1-T3")
- [ ] Unload/reload (restart REAPER) — no duplicate Media Explorer entry in the action list (`docs/COMPLETED.md` §"Ψ-W1-T3")
- [ ] Drag one card across the arrange, over an FX window, over the TCP/MCP and back — cue changes per surface, every transition reverses (`docs/COMPLETED.md` §"Ψ-W1-T4")
- [ ] Drag fast, and drag onto a narrow TCP — target class still resolves; no release anywhere in REAPER is a silent no-op (`docs/COMPLETED.md` §"Ψ-W1-T4")
- [ ] Drop a single card into the arrange — an item lands at the pointer's track and time (`docs/COMPLETED.md` §"Ψ-W1-T4")
- [ ] Drag-out to an external app twenty-plus times in a row — audio arrives every time; this is a soak, a single pass is not a gate (`docs/COMPLETED.md` §"Θ-W1-T2" — "Neither acceptance criterion has actually been met yet")
- [ ] Drop a capture onto an FX container — the instrument loads with that capture (`docs/COMPLETED.md` §"Θ-W1-T2" — "Neither acceptance criterion has actually been met yet")
## Bank packages
- [ ] **Run in full.** `docs/verify-package-transfer.md` — the whole cross-machine
export/import round trip: writes-one-file, the transfer itself, re-importing the
same file never overwrites, the round trip back to the source, the too-new /
truncated / mid-payload-corruption refusals (each an exact string), the
unsaved-project refusals, and drag-and-drop (`docs/COMPLETED.md` §"Ε-W3-T1")
- [ ] Force a degraded tracking ledger and confirm the import refuses **before the
file picker opens**: save a project with a bank, close REAPER, edit the saved
`.rpp`'s `owned_files` ext-state value inside its `<REASAMPLER ...>` block — corrupt
the JSON for the `Unreadable` case, or bump `"v":2` to `"v":3` for the
`FutureVersion` case — reopen the project, then run *ReaSampler: import bank
package (.rsbank)*. Read off: the console prints the ledger-refusal block and no
file dialog ever appears (`origin_ledger.h`'s `LedgerStatus` and `ledgerDegraded`,
`package_import_action.cpp`'s `ledgerPermits`)
- [ ] Export dialog: type a destination name with no extension, then again over a
name that already carries a different one (e.g. `mybank.bak`) — read off whether
`GetUserFileName` appended `.rsbank` itself or ReaSampler's own re-append produced
the double-extension result (`mybank.bak.rsbank`) the code expects
(`src/shell/package/CLAUDE.md` §"Gotchas" — "The re-append is suffix-blind")
- [ ] Both the export and the import file dialogs open in front of REAPER's main
window, not behind it — `GetUserFileName` takes no owner window
(`src/shell/package/CLAUDE.md` §"Gotchas" — "`GetUserFileName` also takes no owner window")
- [ ] With a ReaSampler 9000 instance's editor open on the destination project
(Browse view visible), import a `.rsbank` from the docked panel — the browser
reflects the new bank without closing or reopening the editor (the bank-generation
bump, `session.h`'s `bumpBankGeneration`, polled by the instrument at
`processor_reload.cpp`'s `pollBankSync`)
- [ ] Drag two or more `.rsbank` files onto the docked panel in one drop — each lands
as its OWN new bank, never merged into one, and if the tracking ledger is degraded
the refusal prints ONCE for the whole drop rather than once per file
(`panel_window.cpp`'s `handleDropFiles`)
- [ ] Kill REAPER (or the process) partway through an import so a partial bank file
is stranded under its real name in the bank folder, then re-run the same import
into the same project — read off what happens. Whether the import verb should
pre-clean that stale debris is an open question, not yet decided
(`src/shell/package/CLAUDE.md` §"Gotchas" — "A crash mid-export strands the `.rsbanktmp` sibling")
## The resample bake
- [ ] Bake a dialed sound — the banked file sounds like what the editor was playing (`docs/COMPLETED.md` §"Ξ-W2-T1" — "Not demonstrated")
- [ ] Bake the result twice more — iteration composes, nothing is lost per pass (`docs/COMPLETED.md` §"Ξ-W2-T1" — "Not demonstrated")
- [ ] Save and reopen after a bake — the instance still points at the baked capture (`docs/COMPLETED.md` §"Ξ-W2-T1" — "Not demonstrated")
- [ ] Confirm no bake put an item in the arrange, and the superseded file is still on disk (`docs/COMPLETED.md` §"Ξ-W2-T1" — "Not demonstrated")
- [ ] Bake from an instance in a background project tab — refuses rather than writing into the wrong bank (`docs/COMPLETED.md` §"Ξ-W2-T1" — "Two behaviors worth recording")
- [ ] Load the VST with the extension not installed — the resample affordance reads unavailable, not silently lossy (`docs/COMPLETED.md` §"Ξ-W2-T1" — "Two behaviors worth recording")
- [ ] After a bake: instance is in Trigger with start point reset, channel mode and preview velocity survived (`docs/COMPLETED.md` §"Ξ-W2-T1" — "Reset-scope classifications made at review")
- [ ] Gate mode + active sustain loop — "Bake Hold" appears within ~500 ms, its label fits its cell, its travel is duration-ordered (`docs/COMPLETED.md` §"Ξ-W3-T1")
## Render in place
- [ ] Fire *Render track in place* over a track with a range selected — solo the source
and the new sibling track, invert one track's polarity, and confirm silence. This is
Ρ's own trust anchor: the placement is the null test performed automatically
(`docs/product/render-in-place.md` §"DAW-verification obligations",
`docs/COMPLETED.md` §"Phase Ρ — Render in place")
- [ ] Render in place from three source positions in turn — a normal mid-folder track, a
track that is last in its folder, and a folder-parent track — each time confirm the new
sibling track lands at the same nesting level as the source and that the folder bus
feeds (or bypasses) it correctly. Then, to settle whether `TrackList_AdjustWindows(false)`
is actually needed: comment out that call in `render_in_place.cpp`'s
`RunRenderTrackInPlace` (it was added preemptively, answering a question the spec had
left open rather than one the code confirmed), rebuild, and repeat the folder-parent
case — if nesting still displays correctly with the call removed, it can be dropped in a
follow-up (`docs/product/render-in-place.md` §"DAW-verification obligations")
- [ ] Render in place from a dead-centre (channel-identical) source — confirm the placed
item is mono, and confirm it plays back at the same perceived level the stereo source
did before the render. This is root `CLAUDE.md`'s existing mono-summing
`[verify — DAW]`, promoted to load-bearing because Ρ is the first path that places a
collapsed render into the mix automatically (`docs/product/render-in-place.md`
§"DAW-verification obligations")
- [ ] Fire Render track in place once from Arrange and once from Design. From Arrange:
confirm the source track parks and the result track is visible and in the mix. From
Design: confirm the source stays on the bench, the result track is parked too, then
switch to Arrange and confirm the result track appears in the source's place. **In
both cases wait out at least one panel timer tick before checking membership** — that
is the check that catches a missing explicit-tag-wins filter or an untagged item,
either of which silently reverses the ruling that the result track is always an
Arrange member (`docs/product/render-in-place.md` §"Mode transitions — the source
parks, the result goes to Arrange")
- [ ] Render in place, then press Ctrl-Z once — confirm the new track and its item are
both gone, the source track's folder depth is restored, the rendered file itself is
still on disk, and the source track is still tagged Design (`docs/product/render-in-place.md`
§"DAW-verification obligations")
- [ ] Render in place from a named source, then run it again over the resulting (already
`Capture `-prefixed) track — confirm the name does not stack a second prefix, and
confirm the new sibling's colour matches the source's (the colour clone has no unit
coverage at all). Repeat once from an unnamed source and confirm the result reads
`Capture Track N` (`docs/product/render-in-place.md` §"DAW-verification obligations";
the name-composition logic itself — apart from the live colour clone and the real
`GetTrackName`/`P_NAME` round trip — is unit-tested in `tests/test_capture_name.cpp`)
- [ ] Save a project into a folder whose recording path is set away from the default
(Project Settings → Media → Path), then Render track in place — confirm the rendered
file lands in that configured recording path, not the project folder itself
(`render_in_place.cpp`'s `RunRenderTrackInPlace`, `GetProjectPathEx`)
- [ ] Render in place, save the project, and reopen it — confirm the result track (which
carries an explicit `kArrangeModeId` membership record, unlike the shipped
tag-selected-tracks action which never writes one) behaves identically, in every
mode-switch and visibility check, to an ordinary untagged Arrange track. The JSON
round-trip itself is unit-tested (`tests/test_view_mode_model.cpp`); this is the
live-view half that isn't (`docs/product/render-in-place.md` §"Mode transitions — the
source parks, the result goes to Arrange")
## Instrument migration
- [ ] Open a project saved before the zone retirement — the instance reopens on its first zone and sounds the same (`docs/COMPLETED.md` §"Θ-W1-T1")
- [ ] Such an instance with implicit channel mode + a stereo capture reopens **Stereo** — confirm that is acceptable by ear (`docs/COMPLETED.md` §"Θ-W1-T1")
## Waveform marker zero-crossing snap (Ω-W2-T5)
- [ ] `[verify — DAW]` Drag a Gate loop mark on a single-cycle capture — the felt radius the mark
may be pulled to reach a crossing genuinely reads as imperceptible, i.e. a displacement inside
the pointer's own grab neighbourhood is not one the eye catches (`src/core/instrument/ui/waveform_view.h`'s
`kZeroCrossingSnapPx` comment)
- [ ] `[verify — DAW]` Hold Ctrl, then drag a waveform marker (start/loop start/loop end) off a
zero crossing — confirm it lands exactly where dropped, with no snap, in a live editor window
(`editor_input_waveform.cpp`'s `dragWaveform`, `GetKeyState`-driven, no CI test target)
- [ ] `[verify — DAW]` Press and hold Ctrl BEFORE mouse-down on a mark that coincides with a
contour node or another mark's cap — confirm the mark is grabbed (not the node dragged, not a
hard/smooth toggle fired), matching the fix in `resolveWaveformClaim`
(`src/core/instrument/ui/spline_edit.cpp`)
## Look and feel
- [ ] Sign off by eye in a live editor window: knob arcs, needles, envelope splines, waveform outline (`docs/COMPLETED.md` §"Θ-W7-T1", `docs/COMPLETED.md` §"Θ-W6-T1" — "Antialiasing pass")
- [ ] Same pass for legibility: text sizes, arc weight, and whether the waveform stroke thickens the docked panel (`docs/COMPLETED.md` §"Θ-W6-T1", `docs/COMPLETED.md` §"Θ-W6-T1" — "Sizing")
- [ ] Piano strip at the 840 px default — keys tile uniformly, the 37 px end gutters read as acceptable (`docs/COMPLETED.md` §"Θ-W2-T3")
- [ ] Resize the editor across several widths — gutters stay symmetric, no key width jumps (`docs/COMPLETED.md` §"Θ-W2-T3")
- [ ] Set host/OS scaling to 150% then 200% — record how the strip and the AA strokes actually look (`docs/TODO.md` §"High-DPI host scaling is unverified (distinct from the antialiasing audit)", `docs/COMPLETED.md` §"Θ-W2-T3" — "Width uniformity is guaranteed in client pixels only")
## The VST3 parameter surface
- [ ] `[verify — DAW]` Whether REAPER renders `ParameterInfo::units` beside the string
`getParamStringByValue` returns, or shows the string alone. We ship the SDK's own
convention (digits in the string, unit carried separately); if REAPER shows no unit at
all, the fallback is a one-line change to the single formatter, touching neither the
frozen id table nor the editor (`docs/COMPLETED.md` §"Γ-W4-T1")
- [ ] Whether REAPER's own per-parameter MIDI learn covers what a shipped `IMidiMapping`
CC table would have — the decision to ship no default map rests on it; if learn does not
reach these parameters, a CC table is additive and frozen by nothing (`docs/COMPLETED.md`
§"Γ-W4-T1")
- [ ] The three migration round trips: a pre-parameter project opens with every parameter
reading the blob's value and sounds identical; a project saved by this build restores
fully in an older binary; a project with automation drawn, saved and reopened, replays
against the same plain values (`docs/COMPLETED.md` §"Γ-W4-T1")
- [ ] `[verify — DAW]` **Whether an offline render replays automation at all** — the
sharpest case for the audio-side drain, because the host drives `process()` and may
never touch the controller (`docs/COMPLETED.md` §"Γ-W4-T1")
- [ ] `[verify — DAW]` **Whether REAPER restores instance state through `setState`, not
`setComponentState`** — the entry-point half of the original bundled `[verify, FIRST]`
that an earlier pass closed only the delivery-channel half of. The evidence short of a
DAW is strong but is inference: `vstsinglecomponenteffect.h:41-47` collapses the two
names on a single-component plug-in, and the blob has round-tripped through payload
v1…v16 in real projects. Exercising it costs one save/reopen (`docs/COMPLETED.md`
§"Γ-W4-T1")
docs/product/audit-notes/lambda-w1-t1-build-toolchain.md
+813
View File
@@ -0,0 +1,813 @@
# Λ-W1 Track 1 — Linux build/toolchain audit (build-system lens)
Static analysis of the build surface only — the 23 `CMakeLists.txt` files, `cmake/`,
`src/resource.rc`/`src/resource.h` + the SWELL resgen pipeline, the three vendored submodules
as *build inputs*, the `ctest` harness, toolchain-level flags, and the packaging story in
`docs/product/versioning-and-release.md`. 2026-08-02, branch `pl-w1-t1-build-toolchain-audit`
(cut from `dev` at 6e937b9).
**Source portability is explicitly NOT audited here** — no Win32/GDI/LICE API usage, path
handling, threading, drag/drop, dialog code, fonts, or instrument runtime code. A parallel
track (T2) owns that; what I noticed in passing is listed under "Referred to T2" at the end
and nowhere else.
**Verification posture.** I am on Windows and cannot build or run anything on Linux. Every
claim below is grounded in a file I opened in this worktree — the tree's own CMake, or a
vendored header/source under `vendor/` — not asserted from memory of similar SDKs. Where a
claim depends on runtime behaviour I cannot observe (does REAPER's Linux build call
`SWELL_dllMain`? does GCC accept this TU?), it is marked `[verify — Linux]` with the exact
check, and it is **not** stated as fact. A subsequent citation pass caught several
line-number and attribution errors in this draft (corrected in place, disclosed at the point
each occurs) — grounded-in-a-file is a floor, not a guarantee against a mis-copied line range.
To get the vendored citations I ran `git submodule update --init` for all three submodules
inside this worktree; nothing in the tracked tree was modified.
Severity vocabulary, per the dispatch: **Blocker** = the Linux build cannot produce a loadable
artifact; **Major** = it builds but is degraded or unshippable; **Minor** = ergonomics,
warnings, CI polish. Effort bands are S (< half a day), M (1–3 days), L (a week+), and each
names the reason for the band rather than asserting a number.
---
## 1. Baseline — what the build does today, per platform
**Two loadable modules, 84 pure libraries declared under `src/core/`, 91 CTest targets,
three vendored submodules.** (84 = the `reasampler_pure_library` + bare `add_library` count,
grep-verified library-by-library across the 18 `src/core/**` CMake files that declare any —
`src/core/CMakeLists.txt` and `src/core/instrument/CMakeLists.txt` declare none, only
`add_subdirectory` calls (plus one test in the latter); there are 20 CMake files under
`src/core/**` total, matching the 19 figure in §1d below, which counts *test* declarations
across the whole tree, not `src/core/**` alone. 46 of the 84 are on the extension's link
line.)
- Root `CMakeLists.txt` is 95 lines and declares **no targets at all**: it owns the version
string (`:24`), the channel fork (`:40–54`), the `configure_file` for
`version_generated.h` (`:58–61`), the four vendor path variables (`:65–68`), the
four-TU `LICE_SRC` list (`:78–83`), `enable_testing()` (`:90`), and three
`add_subdirectory` calls (`:92–94`).
- Language/toolchain settings are exactly three lines: `CMAKE_CXX_STANDARD 17`,
`CMAKE_CXX_STANDARD_REQUIRED ON`, `CMAKE_POSITION_INDEPENDENT_CODE ON`
(`CMakeLists.txt:28–30`). There is **no** `CMAKE_BUILD_TYPE`, no `CMAKE_CXX_FLAGS`, no
`CMAKE_CXX_EXTENSIONS`, no IPO/LTO setting, and no `target_compile_options` anywhere in
the tree — I grepped all 23 CMake files for `compile_options`, `find_package`,
`pkg_check`, `link_directories`, `target_link_options`, and `install(` and got zero hits
outside the two files named below.
- **Platform conditionals exist in exactly two files.** Grepping all 23 `CMakeLists.txt`
for `WIN32|APPLE|UNIX|LINUX|MSVC|GNU|Clang|CMAKE_SYSTEM` returns hits only in
`src/app/CMakeLists.txt` (`:71` `if(WIN32)`, `:76` `elseif(APPLE)`, `:88` `else()`) and
`src/shell/instrument/CMakeLists.txt` (`:9` `if(WIN32 AND EXISTS ...)`). Every other
CMake file is platform-neutral by construction: they call the two helpers in
`cmake/reasampler_targets.cmake` (`reasampler_pure_library` at `:8–15`,
`reasampler_test` at `:19–24`) and nothing else.
### 1a. The REAPER extension (`reaper_reasampler`)
Declared as a `MODULE` library over 39 listed TUs (38 shell TUs + `app/main.cpp` itself)
plus `${LICE_SRC}` (`src/app/CMakeLists.txt:8–51`), linking 46 pure static libraries (`:52`) with
`${SDK_INC} ${WDL_INC}` on the include path (`:56`). Output naming is
`PREFIX ""` + channel-derived `OUTPUT_NAME`, pinned to the top of the build tree by
`LIBRARY_OUTPUT_DIRECTORY`/`ARCHIVE_OUTPUT_DIRECTORY` (`:65–69`).
The three-way platform block (`:71–98`) is:
| Branch | State | What it does |
|---|---|---|
| `if(WIN32)` `:71–74` | **Live and shipped** | adds `src/resource.rc` for the RC compiler |
| `elseif(APPLE)` `:76–86` | **Partly aspirational** | adds `swell-modstub.mm`, defines `SWELL_PROVIDED_BY_APP`, links `-framework AppKit`, forces `.dylib`. The resgen `target_sources` line at `:86` is **commented out**. |
| `else()` (Linux) `:88–97` | **Partly aspirational** | adds `swell-modstub-generic.cpp`, defines `SWELL_PROVIDED_BY_APP`, forces `.so`. The resgen `target_sources` line at `:97` is **commented out**. |
So on Linux the build system today produces `reaper_reasampler.so` with the SWELL modstub
compiled in and **no dialog resource of any kind**. `README.md:67–68` states this is
"expected, not a bug" — the tree is honest about it.
**Open question, macOS-only, unresolved by this doc.** The APPLE branch adds
`${SWELL}/swell-modstub.mm` (`:79`), an Objective-C++ TU, but `CMakeLists.txt:26` is
`project(reaper_reasampler VERSION 1.4.0 LANGUAGES CXX)` — OBJCXX is never enabled anywhere
in the tree. Whether CMake resolves a `.mm` source against a plain CXX-only project (some
Apple-toolchain configurations infer Objective-C++ from the extension regardless; others do
not) is unverified from this tree and untestable without a macOS box. `[verify — macOS]`.
Three build-input facts I verified in `vendor/` and that hold in the extension's favour:
- `vendor/WDL/WDL/swell/swell-modstub-generic.cpp` is entirely inside
`#ifdef SWELL_PROVIDED_BY_APP` (`:21`, closed at `:150`). Since
`SWELL_LOAD_SWELL_DYLIB` is not defined anywhere in this build, the `#else` branch at
`:133` applies: the file's whole contribution is the three
`SWELL_curmodule_*resource_head` globals (`:31–33`), the API function-pointer table
built from `swell.h` (`:37–49`), and the `SWELL_dllMain` export (`:135`) that resolves
every SWELL symbol from a host-supplied `GetFunc`. That is the correct stub for a
REAPER extension, and the comment at `src/app/CMakeLists.txt:90` ("With
SWELL_PROVIDED_BY_APP you can drop pkg-config / -lX11 entirely") is **correct**: no SWELL
implementation TU, no X11, no GDK is compiled or linked into the extension.
- The four-TU LICE slice is self-contained on Linux. `lice.cpp` reaches SWELL only through
`SWELL_DeleteGfxContext` (`:153`, `:218`), `SWELL_GetCtxFrameBuffer` (`:182`, `:226`) and
`SWELL_CreateMemContext` (`:224`); `lice_textnew.cpp` reaches it through
`SWELL_PushClipRegion`/`SWELL_SetClipRegion` (`:1027–1028`) and `SWELL_PopClipRegion`
(`:1048`). All six are entries in SWELL's API table
(`vendor/WDL/WDL/swell/swell-functions.h:857`, `:863`, `:877`, `:885–887`), so the
modstub resolves them from the host. No fifth LICE TU is implied: the `_LICE_RGB2HSV_invtab`
table lives inside `lice.cpp` itself (`:3040`), and the one non-Win32-only helper
`utf8makechar` is a file-static defined at `lice_textnew.cpp:26` and used at `:241–242`.
This is a link-success inference, not a from-first-principles proof — the actual proof is
V1, a successful build. One loose end: SWELL's own `Makefile:106–107` lists
`lice_colorspace.o` among the LICE objects *its* build needs — a fifth TU we don't compile.
It stays unreconciled but harmless: `lice_colorspace.cpp` defines the real `LICE_RGB2HSV`
function (declared `lice.h:577`, distinct from the `_invtab` table above), and grepping our
four LICE_SRC TUs and all of `src/` for a call to it returns nothing — SWELL needs the TU
for its own generic-GDK backend, which our four-TU slice never invokes into.
- `CMAKE_POSITION_INDEPENDENT_CODE ON` (`CMakeLists.txt:30`) is already set. This is the
single most commonly missed setting for a `MODULE` target fed by `STATIC` libraries on
Linux, and it is correct today.
### 1b. The VST3 instrument (`reasampler_vst`)
Hard-gated to Windows: `if(WIN32 AND EXISTS "${VST3_SDK}/public.sdk/source/main/pluginfactory.cpp")`
(`src/shell/instrument/CMakeLists.txt:9`). The gate is a conjunction — even with the
`vendor/vst3sdk` slice fully initialised, a Linux configure silently omits the target.
`README.md:33–35` states this explicitly. Two module-level `CLAUDE.md` files record the
underlying product decision (D5) as *settled*, with "a mac/Linux build" named as a
non-goal: `src/core/instrument/CLAUDE.md` (Non-goals/guardrails) and
`src/shell/instrument/CLAUDE.md` (same). `src/shell/panel/CLAUDE.md` carries a third
instance ("Windows-only (D5) — font/GDI/HFONT choices assume Windows").
Inside the gate: a 20-source `vst3_sdk` static library (`:16–38`, grep-counted; lines 28/29/37
are comments) pinned to SDK tag
`v3.7.9_build_61` (confirmed by `git describe --tags` in `vendor/vst3sdk`), and the
`reasampler_vst` MODULE (`:44–81`) which additionally compiles `dllmain.cpp` and
`moduleinit.cpp` directly (`:78–79`, with the linker-stripping rationale at `:75–77`) plus
`${LICE_SRC}` (`:80`). Output is a single **file** named `<name>.vst3` (`:106–111`).
### 1c. Resources
`src/resource.rc` declares exactly one dialog — `IDD_BANK_PANEL`, a bare `WS_CHILD`
`DIALOG` with an empty `BEGIN`/`END` body and no controls (`:18–22`). `src/resource.h`
defines the single id `IDD_BANK_PANEL 1000` (`:8`). It is consumed by
`CreateDialogParam(g_hInst, MAKEINTRESOURCE(IDD_BANK_PANEL), …)` at
`src/shell/panel/panel_window.cpp:135`.
### 1d. Test harness
91 test declarations across 19 `CMakeLists.txt` files (grep count), matching 91 files in
`tests/`. 90 go through `reasampler_test` (`cmake/reasampler_targets.cmake:19–24`, which is
`add_executable` + `target_link_libraries` + `add_test`); one is longhand —
`app_version_padding_tests` (`src/core/version/CMakeLists.txt:37–42`), which recompiles
`app_version.cpp` against a second `configure_file` output so the include-dir substitution
works. Neither shape carries anything platform-specific.
Only two test files mention a platform at all: `tests/test_capture_paths.cpp` (five
`#ifdef _WIN32` blocks at `:19`, `:41`, `:87`, `:152`, `:205`, each with a POSIX `#else`
branch already written — e.g. `:158–168` asserts `resolveBankFile("/home/d/proj", …)`), and
`tests/test_pitch_shift.cpp:3`, where the string is inside a comment explaining why the
target links nothing that would drag `<windows.h>` in. No test includes `reaper_plugin.h`,
`windows.h`, or any SWELL header. **The test harness is the healthiest part of this
surface**; see §3 for the one generator-shape caveat.
### 1e. Packaging / release, as already committed
`docs/product/versioning-and-release.md` already commits to Linux as a first-class target:
- `:361–363` — "**Artifact per platform.** The binary is `reaper_*.dll|.dylib|.so`; the
macOS/Linux builds need the SWELL resgen step (CLAUDE.md §SWELL dialog resources) baked
into the pipeline. Three platform artifacts per channel per release."
- `:307–310` — two named artifacts (stable + beta) per platform, "three platform artifacts
each", explicitly handed off to dev-ops.
- `:364–366` — "Install is copy-in + restart… there is no server-side rollout."
What that document does **not** contain: any mention of code signing, macOS notarization, a
CI runner, or a Linux install path. I grepped it for `sign|notariz|CI|platform|linux` — one
hit is not cited above (`:393`, "artifacts (stable + beta) per platform", the same dev-ops
handoff as `:307–310`); the rest are the lines above. The substantive conclusion — no
signing/notarization/CI/Linux-install-path mention anywhere — holds regardless. There is no
CI configuration anywhere in the repo (`ls -a` on
the root shows `.git`, `.gitignore`, `.gitmodules`, `CLAUDE.md`, `CMakeLists.txt`, `LICENSE`,
`README.md`, `cmake`, `docs`, `src`, `tests`, `vendor` — no `.github`, no `.gitlab-ci.yml`),
and no `install()` rule in any of the 23 CMake files. So "the pipeline" is entirely notional
today, on every platform.
---
## 2. Findings
### Λ-01 — the Linux/macOS dialog-resource path is broken in three independent ways, and the fix may not need resgen at all
**Severity: Major. Effort: S (mechanical) to M (if the resgen route is taken and automated).**
**Citations.** `src/app/CMakeLists.txt:94–97` (the Linux comment block) and `:83–86` (the
identical macOS one); `vendor/WDL/WDL/swell/swell_resgen.php:313–314`;
`vendor/WDL/WDL/swell/swell-dlggen.h:22`; `vendor/WDL/WDL/swell/sample_project/myapp.cpp:192–193`;
`vendor/WDL/WDL/swell/swell-dlggen.h:214–218`; `vendor/WDL/WDL/swell/swell-modstub-generic.cpp:31–33`;
`vendor/WDL/WDL/swell/swell-functions.h:612–619`; `src/resource.rc:18–22`;
`src/shell/panel/panel_window.cpp:135`.
**What breaks.** Three defects stack, and each alone would sink the step:
1. **The named script does not exist.** Both comment blocks say
`php ${WDL_INC}/swell/mac_resgen.php src/resource.rc` (`:85` and `:96`). Listing
`vendor/WDL/WDL/swell/` shows `swell_resgen.php`, `swell_resgen.pl`, and
`swell_resgen.sh` — there is no `mac_resgen.php`. `CLAUDE.md` and `README.md:120` both
name the correct script; only the CMake comments are wrong, which is exactly the file an
implementer will be reading when they do the work.
2. **The named output file is not what the generator writes.** Both commented
`target_sources` lines (`:86`, `:97`) reference
`${REASAMPLER_SRC_DIR}/resource.rc_mac_dlg.h`. `swell_resgen.php:313–314` composes its
output names as `$srcfn . "_mac_menu"` and `$srcfn . "_mac_dlg"` — so the actual outputs
are `src/resource.rc_mac_dlg` and `src/resource.rc_mac_menu`, with **no** `.h` suffix.
3. **Even the correct filename cannot be a `target_sources` entry.** `swell-dlggen.h:22`
states the contract outright: "Use swell_resgen.pl or swell_resgen.php on the .rc file,
which will produce .rc_mac_dlg, **include that**." The generated body is a run of
`SWELL_DEFINE_DIALOG_RESOURCE_BEGIN(...)` macro invocations
(`swell_resgen.php:117–129`) that only expand after `swell-dlggen.h` has been included —
`swell-dlggen.h:214–218` shows the macro emitting a static `SWELL_DialogRegHelper` that
registers into `SWELL_curmodule_dialogresource_head`. The canonical consumption pattern
is the SDK's own sample: `sample_project/myapp.cpp:192–193` does
`#include "../WDL/swell/swell-dlggen.h"` then `#include "res.rc_mac_dlg"`. A CMake
`target_sources` entry for an extensionless file would not even get a language assigned.
**The runtime consequence, and why this is Major rather than Blocker.** The `.so` still
builds and still loads: the extension's whole action family, capture pipeline, and persist
layer are untouched. What fails is the dock panel. `swell-functions.h:615` defines
`CreateDialog(hinst,resid,par,dlgproc)` as
`SWELL_CreateDialog(SWELL_curmodule_dialogresource_head,(resid),par,dlgproc,0)`.
`swell-modstub-generic.cpp:32` *defines* that head but nothing ever populates it, because
the resgen'd registration TU does not exist — so it stays null and
`panel_window.cpp:135`'s `CreateDialogParam` gets a null resource list. The panel is the
product's primary surface, so a Linux build without it is not shippable; it is not a
Blocker only because the binary loads and the actions work.
**The route worth considering first.** `swell-functions.h:606–608` documents an escape
hatch: *"If you are using CreateDialog() and creating a child window, you can use a resource
ID of 0, which creates an opaque child window. Instead of passing a DLGPROC, you should pass
a (WNDPROC) routine that returns LRESULT (and cast it to DLGPROC)."* The header comment is
not just documentation — the implementation confirms both halves of it:
`swell-dlg-generic.cpp:291–292` is `SWELL_DialogResourceIndex *p=resById(reshead,resid); if
(!p&&resid) return 0;`, and `resById` (`:34–43`) walks from a (here, null) `reshead` and
returns 0 on a miss. That confirms the graceful-failure claim behind "Major rather than
Blocker" above (a null `reshead` plus a non-zero `resid` returns 0, not a crash — matching
`panel_window.cpp:137`'s `if (!g_panel.hwnd) return;`), **and** that `resid == 0` skips the
lookup entirely (`&&resid` short-circuits), which is the escape hatch this paragraph is about.
`src/resource.rc:18–22`
shows `IDD_BANK_PANEL` is precisely that: a `WS_CHILD` dialog with an empty body and zero
controls, whose comment at `:8–10` says "the bank_panel shell owns every pixel and draws the
sample grid with LICE in `WM_PAINT`". If the panel is created with resource id 0 on
non-Windows, **the entire resgen pipeline — the PHP dependency (`README.md:54`), the
generated-file-in-source-tree problem, and the per-platform regeneration story — disappears
from the Linux and macOS builds.** The cost is a source change in `panel_window.cpp` and the
DLGPROC→WNDPROC return-type contract; that half is T2's call, not mine, and I am naming the
option rather than choosing it. This is a shared macOS/Linux fix either way.
**If the resgen route is taken instead**, the build work is: a `find_program(PHP …)`, an
`add_custom_command` generating into `${CMAKE_CURRENT_BINARY_DIR}` (not the source tree —
`.gitignore` has no pattern matching `resource.rc_mac_dlg`, so today's manual step would
leave an untracked generated file sitting in `src/`), a new one-line shim TU that includes
`swell-dlggen.h` then the generated file, and that shim added to `target_sources`. That is
the M-effort half of the band.
---
### Λ-02 — `--config Release` is a silent no-op on Linux, so the documented ship command produces an unoptimized binary
**Severity: Major. Effort: S — one `if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)` block plus a doc correction.**
**Citations.** `CMakeLists.txt:28–30` (the complete list of language settings — I read the
whole 95-line file and there is no `CMAKE_BUILD_TYPE` anywhere); `README.md:106–109`;
`CLAUDE.md` §"Build and test" and §"Install / reload".
**What breaks.** Both docs prescribe `cmake --build build --config Release` as the
optimize-and-ship incantation, and `README.md:130–131` tells the user to copy from
`build/Release/`. `--config` is a multi-config-generator flag; on Ninja or Unix Makefiles it
is accepted and ignored. Because no `CMAKE_BUILD_TYPE` default is set, the resulting build
passes **no `-O` flag at all** to GCC/Clang — not `-O0` explicitly, just the compiler's
unoptimized default. The failure is silent in both directions: the command succeeds, and the
artifact lands at `build/reaper_reasampler.so` — a path the docs never state for a
single-config generator (a gap, not an error; see Λ-08).
This matters more here than the usual "forgot to set the build type" — but only for `peaks`.
`CLAUDE.md`'s §"Build and test" (not §"Performance guardrails") states, at `CLAUDE.md:54`,
that the header-inline hot paths "presume an **optimizing** build", with no LTO configured to
recover it if they don't. `peaks`' `computeEnvelope`/`lastFrameAboveThreshold` is one of
those paths and IS linked into the extension (`src/app/CMakeLists.txt:56`), so the finding
holds for Fork A as stated. It does **not** extend to `Voice::advanceFrame` or the three
`envelopes.h` evaluators (named at `src/core/instrument/CLAUDE.md:378`, not in root
`CLAUDE.md`) — those belong to `sampler_core`, which `src/app/CMakeLists.txt:57–59` states is
deliberately NOT linked into the extension and which only enters a build at all inside the
Windows-gated `reasampler_vst` target (§1b). On Fork A that code never compiles into
`reaper_reasampler` in the first place; the unoptimized-build risk to it is a Fork B concern,
not this extension-only one. A Linux user following the README's `--config Release` would
ship an extension binary whose `peaks` hot path did not inline.
**Done when:** `cmake --build build` on Linux (Ninja/Make, no `--config`) produces a build
whose compile commands (`compile_commands.json` or verbose build log) show an explicit `-O`
flag, and the README/CLAUDE.md ship instruction names the single-config-generator path.
**Sequencing note.** This is not strictly Linux-specific — Ninja on Windows has the same
shape — but it becomes load-bearing the moment Linux is a shipped platform, because Makefiles
and Ninja are the default there.
---
### Λ-03 — no symbol-visibility control, and two modules in one process both export a full copy of LICE
**Severity: Major. Effort: S — one `CXX_VISIBILITY_PRESET hidden` + `VISIBILITY_INLINES_HIDDEN` pair, plus a `[verify — Linux]` load test.**
**Citations.** `CMakeLists.txt:78–83` (`LICE_SRC`); `src/app/CMakeLists.txt:35` and
`src/shell/instrument/CMakeLists.txt:80` (the same four LICE TUs compiled into *both*
modules — the rationale for the duplication is at `CMakeLists.txt:75–77`);
`vendor/reaper-sdk/sdk/reaper_plugin.h:52`; `src/app/main.cpp:251`;
`vendor/vst3sdk/pluginterfaces/base/fplatform.h:164`;
`vendor/WDL/WDL/swell/Makefile:20`.
**What breaks.** Nothing in the build sets a visibility preset, so GCC/Clang default to
`-fvisibility=default` and every non-static symbol in both modules — all of LICE, all the
WDL helpers, every pure library's exported functions, and the whole C++ standard-library
instantiation set — lands in the module's dynamic symbol table. On Windows this is a
non-issue: each DLL has its own symbol table and per-module resolution. `[verify — Linux]`
on ELF, symbols from `dlopen`'d objects CAN participate in global interposition — but whether
they actually do here depends on REAPER's own `dlopen` flags (`RTLD_GLOBAL` vs `RTLD_LOCAL`)
and whether REAPER's executable is linked `--export-dynamic`, neither of which this tree can
answer. The scenario this doc originally named — a hypothetical `reasampler_9000.so` — does
not exist on Fork A: per Λ-10 and `src/shell/instrument/CMakeLists.txt:9`, the VST3 target is
gated `WIN32 AND EXISTS ...` and is never built on Linux unless D1 selects Fork B. The
Fork-A-real risk is different: any **second REAPER extension** loaded in the same REAPER
process (a third-party `.so` in `UserPlugins/`) that links its own copy of LICE/WDL and also
defaults to `-fvisibility=default` is a candidate to interpose with `reaper_reasampler.so`'s
`LICE_FillRect` and the rest of the exported LICE/WDL symbol set. That is a class of bug that
presents as "one extension's LICE draws with another extension's LICE build" and is invisible
on Windows, where each DLL keeps its own symbol table.
**Why hiding is safe here.** The two symbols that genuinely must be exported already say so
explicitly: `reaper_plugin.h:52` defines
`REAPER_PLUGIN_DLL_EXPORT __attribute__((visibility("default")))` on non-Windows, and
`main.cpp:251` uses it (`extern "C" REAPER_PLUGIN_DLL_EXPORT int REAPER_PLUGIN_ENTRYPOINT(...)`).
On the VST3 side, `fplatform.h:164` defines `SMTG_EXPORT_SYMBOL` the same way. SWELL's own
build already uses `-fvisibility=hidden` (`Makefile:20`), which is the precedent. The one
thing to confirm on a Linux box is that `swell-modstub-generic.cpp:135`'s `SWELL_dllMain`
survives — it carries its own `__attribute__ ((visibility ("default")))` at that line, so it
should, but the modstub is compiled by *our* build, not SWELL's.
*Shared macOS/Linux — the visibility default and the LICE-TU duplication (`CMakeLists.txt:75–77`)
apply the same way under the APPLE branch's Mach-O two-level namespace, though the concrete
Fork-A-real interposition mechanism above is ELF-specific; macOS's own dynamic-linker symbol
resolution is a separate `[verify]` this doc does not attempt.*
---
### Λ-04 — nothing links a thread library, and `<pthread.h>` is in the extension's include graph
**Severity: Major (VST3 target) / Minor (extension). Effort: S — `find_package(Threads)` + `Threads::Threads`.**
**Citations.** `src/shell/panel/panel_state.h:20–24`;
`vendor/vst3sdk/base/thread/source/flock.cpp:71–133`;
`src/shell/instrument/CMakeLists.txt:15–39`; `vendor/WDL/WDL/swell/Makefile:90`.
**What breaks.** No CMake file in the tree calls `find_package(Threads)` or links
`Threads::Threads`/`-lpthread`/`-ldl` (grep-verified across all 23). Two separate exposures:
- **Extension.** `panel_state.h:23` includes `<pthread.h>` on non-Win32 — and it is not the
only entry point: `vendor/reaper-sdk/sdk/reaper_plugin.h:50` includes `<pthread.h>`
unconditionally in its non-Windows branch, so it is in **every** shell TU's include graph
(every `.cpp` that includes `reaper_plugin.h`/`reaper_plugin_functions.h`), not just the
one panel file. This strengthens rather than changes the finding: I still did not find a
pthread *call* in `src/shell/`'s own code, so this may be an include-only dependency that
needs no link flag on a modern glibc (where the pthread symbols are in libc proper). Stays
Minor, and `[verify — Linux]`.
- **VST3 target.** `flock.cpp` is unambiguous: on non-Windows it calls
`pthread_mutexattr_init`/`_settype`/`_destroy` (`:71–76`), `pthread_mutex_init` (`:74`),
`pthread_mutex_destroy` (`:89`), `_lock` (`:105`), `_unlock` (`:121`) and `_trylock`
(`:133`). It is unconditionally in the `vst3_sdk` source list
(`src/shell/instrument/CMakeLists.txt:27`). Any Linux VST3 target must link a thread
library. SWELL's own Makefile uses `-lpthread -ldl` (`:90`) for the same reason.
Adding `find_package(Threads REQUIRED)` + `target_link_libraries(... Threads::Threads)` is
correct on all three platforms and costs nothing on Windows.
**Done when:** the extension links with `Threads::Threads` removed (proving the include-only
half needs no flag, or naming the symbol that forces it — see V5), and, if Fork B is taken,
`reasampler_vst` links clean with `Threads::Threads` present.
*Shared macOS/Linux — `reaper_plugin.h:50`'s non-Windows `<pthread.h>` include and
`flock.cpp`'s non-Windows pthread calls apply identically to the APPLE branch.*
---
### Λ-05 — `reaper_plugin.h`'s SWELL include resolves only by coincidence of the `-I` line
**Severity: Minor. Effort: S — a comment, or an `INTERFACE` target that carries both include dirs as one unit.**
**Citations.** `vendor/reaper-sdk/sdk/reaper_plugin.h:42–54`; `CMakeLists.txt:65–66`;
`src/app/CMakeLists.txt:56`; `src/shell/instrument/CMakeLists.txt:97`.
**What breaks — and, today, does not.** On non-Windows, `reaper_plugin.h:49` does
`#include "../WDL/swell/swell.h"`. Relative to the including file's own directory
(`vendor/reaper-sdk/sdk/`) that resolves to `vendor/reaper-sdk/WDL/swell/swell.h`, which does
not exist — listing `vendor/reaper-sdk/` shows only `README`, `reaper-plugins`, and `sdk`.
The include is nevertheless satisfiable, because the quoted-include fallback searches the
`-I` path, and `WDL_INC` is `${CMAKE_CURRENT_SOURCE_DIR}/vendor/WDL/WDL` (`CMakeLists.txt:66`) —
so `WDL_INC` + `../WDL/swell/swell.h` normalizes to `vendor/WDL/WDL/swell/swell.h`, which
exists. Both module targets pass `${WDL_INC}` (`src/app:56`, `src/shell/instrument:97`), so it
holds today.
The hazard is that this is a load-bearing coincidence with no comment anywhere, and it is
**invisible on Windows** — `reaper_plugin.h:43` takes `<windows.h>` instead, so dropping
`${WDL_INC}` from any target that includes `reaper_plugin.h` would pass CI on Windows and
fail only on Linux/macOS. Worth pinning before more targets are added.
---
### Λ-06 — the build has no platform partition of its source list, so every T2 finding lands here as a CMake change
**Severity: Minor (structural). Effort: S per TU once T2 says which ones need it.**
**Citations.** `src/app/CMakeLists.txt:8–51` and `:71–98`;
`src/shell/actions/drag_out_win.cpp:8`, `:249`, `:282`.
**Mechanism.** All 38 shell TUs (plus `app/main.cpp`, 39 listed TUs total) are listed unconditionally (`:8–51`); the platform block at
`:71–98` only *adds* sources, never removes or substitutes any. Every TU therefore enters a
Linux compile, and the only thing standing between the build and a compile error is each
file's own `#ifdef` discipline. Today that discipline is uneven in a way worth recording:
- `drag_out_win.cpp` is the model — `#ifdef _WIN32` at `:8` with a real
`// ---- macOS / Linux (SWELL)` branch at `:249` and `#endif` at `:282`.
- `arrange_drop_win.cpp` and `instrument_drop_win.cpp` contain **zero** occurrences of
`_WIN32` (grep count 0 each) and include no `<windows.h>` — they are `_win`-suffixed for
the surface they serve, not for a platform dependency, and appear portable by inspection.
This is not itself a defect; it is the reason the ordering sketch in §5 puts "read T2's
output, then partition the source list" as a distinct step rather than folding it into the
resgen work.
---
### Λ-07 — `std::filesystem` in a pure library, with no stated minimum compiler
**Severity: Minor. Effort: S — a `cmake_minimum_required`-adjacent compiler check or a documented floor.**
**Citations.** `src/core/capture/capture_paths.cpp:5` (`#include <filesystem>`) and `:95`
(`std::filesystem::path(rppPath).parent_path().string()`); `README.md:50–54`.
**What breaks.** `capture_paths` is a *pure* library with its own CTest target
(`src/core/capture/CMakeLists.txt:1–2`), so this is on the test-harness path as well as the
extension's. GCC 8 requires an explicit `-lstdc++fs` for `std::filesystem`; GCC ≥ 9 and
libstdc++ ≥ 9 do not. `README.md:51` states only "A C++17 compiler" as the prerequisite, and
`cmake_minimum_required(VERSION 3.19)` (`CMakeLists.txt:1`) says nothing about the compiler.
On any current distro toolchain this is a non-issue; it becomes one on an older CI image.
Twelve other files in `src/shell/` also use `<filesystem>` (grep-verified), but one —
`src/shell/instrument/instrument_bake.cpp` — is in the `reasampler_vst` target, not the
extension: eleven in `reaper_reasampler`, sharing the fix below; the twelfth shares it only
if/when Fork B builds that target on Linux.
**Done when:** `capture_paths_tests` links on the oldest toolchain the phase targets without
`-lstdc++fs` added explicitly, or that flag is added and documented as the floor.
*Shared macOS/Linux — `capture_paths` and the eleven extension-side `<filesystem>` users
compile identically under the APPLE branch; whether Apple's libc++ needs the same kind of
minimum-toolchain floor as libstdc++ does is a separate `[verify]` this doc has not checked,
but the coverage-hole shape (undocumented compiler floor) is identical either way.*
---
### Λ-08 — the install instruction is silent about single-config generators, and no path is documented for Linux at all
**Severity: Minor. Effort: S — a doc fix, or an `install()` rule if packaging is ever automated.**
**Citations.** `src/app/CMakeLists.txt:68` (`LIBRARY_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}"`);
`README.md:130–131`; `CLAUDE.md` §"Install / reload";
`docs/product/versioning-and-release.md:364–366`.
**What breaks — a gap, not an error.** `README.md:130–131` and `CLAUDE.md` §"Install /
reload" both already carry the multi-config qualifier verbatim ("`build/Release/` on a
multi-config generator — not the default `Debug/` output") — so the instruction is not
wrong, it is simply silent about the other case. On a multi-config generator CMake appends
the config directory, giving the documented `build/Release/`. On Ninja/Make the module lands
directly at `build/reaper_reasampler.so`, and neither doc names that path. Compounding it,
there is no `install()` rule anywhere in the 23 CMake files, and no target directory is
documented for Linux at all — `CLAUDE.md` and `README.md:132` say "REAPER's `UserPlugins/`
folder (Options → Show REAPER resource path)", which is a correct user-facing instruction but
not a path a pipeline can use. I could not confirm REAPER's Linux resource-path root from the
SDK: grepping `vendor/reaper-sdk/sdk/` for `UserPlugins` and `reaper_*.so` returns nothing —
the `reaper_*.dll|dylib|so` filename convention stated in `CLAUDE.md` is not documented in the
vendored headers. `[verify — Linux]`.
---
### Λ-09 — no warning flags anywhere, so the first GCC/Clang build surfaces a diagnostic set nobody has ever seen
**Severity: Minor. Effort: S to add flags; **unknowable** to fix what they reveal — that is the honest band.**
**Citations.** grep for `target_compile_options` across all 23 CMake files: zero hits (the
only `compile_definitions` hits are `SWELL_PROVIDED_BY_APP` at `src/app/CMakeLists.txt:80`,
`:92` and the SDK's `DEVELOPMENT`/`RELEASE` selector at
`src/shell/instrument/CMakeLists.txt:42`). `CMakeLists.txt:28–30` for the absence of
`CMAKE_CXX_EXTENSIONS`.
**Mechanism.** The codebase has been compiled by exactly one compiler family. MSVC's default
is `/W1`; GCC/Clang's default is essentially silent. Adding `-Wall -Wextra` on the first
Linux build is the right move, but the size of the resulting diagnostic set over ~39k LOC is
not estimable from Windows, which is why the effort band is split. Do **not** add `-Werror`
in the same change.
Secondary, in the same family: `CMAKE_CXX_EXTENSIONS` is unset, so it defaults to `ON` and
GCC/Clang compile as `-std=gnu++17` rather than `-std=c++17`. Not a bug; a hygiene knob
worth flipping while the flags are being set, since it is the difference between "portable
C++17" and "whatever GNU extensions happened to be used".
**Coverage hole: the link-succeeds-but-load-fails asymmetry is never stated.** GNU `ld` does
not error on undefined symbols in a shared object by default — MSVC's linker does. For a
`MODULE` REAPER `dlopen()`s, that means a Linux build can link `reaper_reasampler.so` clean
and only discover a missing symbol when REAPER tries to load it (`dlopen` failing, or a
partially-resolved symbol table if a satisfying-by-coincidence symbol exists elsewhere in the
process — a real risk given Λ-03's global-interposition finding above). Neither `Threads`
(Λ-04) nor visibility (Λ-03) named this asymmetry, and it undercuts §5's framing of V1
(`cmake --build build`) as "the single highest-information action available" — a clean build
on Linux does not carry the same guarantee a clean Windows build does. `-Wl,--no-undefined`
(GNU ld) would restore the MSVC-equivalent fail-at-link-time behavior; whether it is needed
here specifically depends on whether `SWELL_PROVIDED_BY_APP`'s function-pointer design (§1a)
already accounts for every symbol the modstub doesn't itself define — that is `[verify —
Linux]`, since it requires an actual GCC/Clang link to observe.
**Done when:** the Linux build either adds `-Wl,--no-undefined` (or the equivalent) so an
undefined-symbol build failure surfaces at link time, or a stated reason is recorded for why
`SWELL_PROVIDED_BY_APP` makes the gap moot.
*Shared macOS/Linux — `-Wall -Wextra`, `CMAKE_CXX_EXTENSIONS OFF`, and the GNU-ld-vs-MSVC-ld
asymmetry (macOS's linker also does not default to erroring on undefined symbols) apply
identically to the APPLE branch.*
---
### Λ-10 — the submodule story costs a Linux developer a large download for a target that is gated off
**Severity: Minor. Effort: S — a doc paragraph.**
**Citations.** `.gitmodules` (three entries, no `shallow`, no `branch`);
`README.md:70–86`; `src/shell/instrument/CMakeLists.txt:9`; `CLAUDE.md` §"One-time submodule setup".
**Mechanism.** `README.md:72–75` already warns that `git clone --recursive` pulls all of
`vendor/vst3sdk`'s nested submodules (`vstgui4`, `tutorials`, `doc`, `cmake`) that this
project never links, and prescribes the narrow init instead. What neither the README nor
`CLAUDE.md` says is that on Linux the `vendor/vst3sdk` submodule is **pure cost**: the
`WIN32 AND EXISTS` gate at `src/shell/instrument/CMakeLists.txt:9` omits the target
regardless, so `git submodule update --init vendor/reaper-sdk vendor/WDL` is the complete
Linux prerequisite. One sentence in the platform-support table would save every Linux
contributor the download.
---
## 3. Surfaces checked and found clean
Recorded so the plan author does not re-spend effort here. Each was read or grepped in this
pass.
- **All 23 `CMakeLists.txt` files were read in full**, not sampled: root; `src/app`;
`src/core`; `src/core/{audio,capture,instrument,json,model,reclaim,tracking,ui,util,version,view,wire}`;
`src/core/instrument/{bake,engine,map,note,ui}`; `src/core/instrument/engine/{filter,loop}`;
`src/shell/instrument`. Plus `cmake/reasampler_targets.cmake`. Of these, 21 are entirely
platform-neutral — they declare libraries and tests through the two helpers and nothing
else.
- **`CMAKE_POSITION_INDEPENDENT_CODE ON`** (`CMakeLists.txt:30`) — the usual Linux
`MODULE`-fed-by-`STATIC` trap, already handled.
- **`.so` naming.** `PREFIX ""` (`src/app/CMakeLists.txt:66`) + `SUFFIX ".so"` (`:93`) +
channel-derived `OUTPUT_NAME` (`:67`) yields `reaper_reasampler.so` /
`reaper_reasampler_beta.so`, matching the `reaper_*` convention. `ARCHIVE_OUTPUT_DIRECTORY`
(`:69`) is a Windows import-lib concern and harmlessly inert on Linux.
- **The channel fork is platform-independent.** `REASAMPLER_CHANNEL` (`CMakeLists.txt:40–54`)
threads through `configure_file` (`:58–61`) into names only; nothing in it is
Windows-specific, so beta builds fork identically on Linux.
- **The version padding canary** (`src/core/version/CMakeLists.txt:21–42`) uses a
function-scoped `set()` + second `configure_file` + longhand `add_executable`. Portable;
no platform assumption.
- **The whole test corpus is platform-neutral.** 91 files in `tests/`, 91 declarations in
CMake. Only `test_capture_paths.cpp` branches on platform and it already has POSIX
expectations written; only `test_pitch_shift.cpp` mentions `windows.h`, in a comment.
- **Generator-shape handling in the docs is already correct.** `README.md:93–98` explains
that `-C Debug` is required on multi-config and unnecessary on Ninja/Make. `ctest --test-dir
build` works bare on Linux; the `-C Debug` in the README's example is harmless there.
- **SWELL API coverage for the LICE slice** — all six SWELL GDI entry points LICE needs are
in the modstub-resolved table (`swell-functions.h:857`, `:863`, `:877`, `:885–887`).
- **The LICE slice needs no fifth TU on Linux** (`lice.cpp:3040` `_LICE_RGB2HSV_invtab`
table, `lice_textnew.cpp:26` file-static `utf8makechar`) — an inference from V1's link
success plus these two spot checks, not exhaustive; see §1a's fuller caveat, including the
unreconciled `lice_colorspace.o` in SWELL's own `Makefile:106–107`.
- **`swell-modstub-generic.cpp` compiles against its own includes** — it uses `printf`
(`:61`), which arrives via `swell.h` → `swell-types.h:29` (`#include <stdio.h>`). The
`dlopen`/`readlink` block (`:69–131`) is behind `SWELL_LOAD_SWELL_DYLIB`, which this build
never defines.
- **The Linux run-loop IIDs are already in the vendored VST3 slice.**
`public.sdk/source/common/commoniids.cpp:50–54` defines `Linux::IEventHandler`,
`Linux::ITimerHandler` and `Linux::IRunLoop` under `#if SMTG_OS_LINUX`, and that file is
already in the `vst3_sdk` source list (`src/shell/instrument/CMakeLists.txt:36`). A Linux
VST3 port needs no additional SDK translation unit for the run loop.
- **`SMTG_OS_LINUX` / `SMTG_EXPORT_SYMBOL` are correct in the pinned SDK**
(`pluginterfaces/base/fplatform.h:132`, `:164`).
- **The MSVC-ABI caveat is Windows-scoped.** `reaper_plugin.h:22` warns that the C++
interfaces "require MSVC on win32, or at least the MSVC-compatible C++ ABI" — that is a
constraint on Windows toolchains (mingw), not on Linux, where REAPER and the extension both
use the Itanium ABI.
---
## 4. The VST3-on-Linux question, stated as a fork
Daniel rules on this. Below is the cost of each side with the evidence, and nothing else.
### Fork A — extension only on Linux
Scope: everything in §2 (Λ-01 through Λ-10). The VST3 gate at
`src/shell/instrument/CMakeLists.txt:9` stays exactly as it is; a Linux configure omits the
target and the `vendor/vst3sdk` submodule becomes optional there (Λ-10).
**Cost profile:** one Major that must be solved (Λ-01, the panel), two Majors that are
one-line-ish but load-bearing (Λ-02 optimization, Λ-03 visibility), one Major/Minor
(Λ-04 threads), and six Minors. No new third-party dependency. No new artifact format. No
change to any product decision on record.
**The unknown that dominates the band:** none of the extension's source portability is
audited here. The build-system work is small; whether the 38 shell TUs *compile and behave*
against SWELL's Win32 subset is T2's answer, and it, not this list, sets the phase's size.
### Fork B — extension + ReaSampler 9000 on Linux
Everything in Fork A, plus the following. Three of five are Blockers under the severity
vocabulary defined above ("the Linux build cannot produce a loadable artifact"): B1, B2, B3.
B4 downgrades to Major — the module still loads; only the editor fails to attach without it.
B5 is not a technical blocker at all — it is a documentation act, though one that must
precede the others in sequence (see §6 Stage 5).
- **B1 — the entry point is the wrong one, and the right one is already vendored.**
`src/shell/instrument/CMakeLists.txt:78` compiles
`public.sdk/source/main/dllmain.cpp` into the module. That file does
`#include <windows.h>` at `:41` with no `SMTG_OS_*` guard — grepping the file for
`SMTG_OS` returns nothing, and its only conditionals are
`#if defined(_MSC_VER) && defined(DEVELOPMENT)` (`:43`, `:96`) and `#ifdef __cplusplus`
(`:58`, `:87`). Linux needs
`public.sdk/source/main/linuxmain.cpp`, which is present in the slice and exports
`ModuleEntry`/`ModuleExit` (`extern "C"` declarations `linuxmain.cpp:47–52`; definitions
`:59–67` and `:72–82` respectively). Both are **mandatory** — the
SDK's own loader refuses the module without either
(`public.sdk/source/vst/hosting/module_linux.cpp:189–204`, error strings "The shared
library does not export the required 'ModuleEntry' function" and the same for `ModuleExit`).
`GetPluginFactory` is checked at `:205`. **Effort S** — a `CMakeLists.txt` source swap
(`dllmain.cpp` → `linuxmain.cpp`) plus the platform `if()`; both files are already vendored,
nothing to write from scratch.
- **B2 — the artifact is a directory bundle, not a file.** Today the target sets
`SUFFIX ".vst3"` on a MODULE (`src/shell/instrument/CMakeLists.txt:106–111`), producing a
single file. `module_linux.cpp:146–170` (`getSOPath`) shows what a Linux host actually
opens: the path must be a **directory**, containing `Contents/`, containing
`<machine>-linux/` where `<machine>` is `uname().machine` (`:158–163`, helper at `:88–97`),
containing `<stem>.so` (`:167–168`). So `reasampler_9000.vst3/Contents/x86_64-linux/reasampler_9000.so`.
That is `add_custom_command(POST_BUILD)` work plus an install rule. Install roots are
`$HOME/.vst3/`, `/usr/lib/vst3/`, `/usr/local/lib/vst3/` and `$APPFOLDER/vst3/`
(`module_linux.cpp:282–302`). `Contents/Resources/moduleinfo.json` is **optional** —
`getModuleInfoPath` (`:356–365`) returns empty when the file is absent rather than failing.
**Effort M** — mechanical, but it is a new artifact shape with an install story and a
per-architecture directory name.
- **B3 — the drawing stack is the real cost, and it is where Fork B stops being a build task.**
The VST3 module compiles the same four LICE TUs (`src/shell/instrument/CMakeLists.txt:80`),
and on non-Win32 LICE resolves its GDI through SWELL (§1a). But **a VST3 plugin is not a
REAPER extension**: `swell-modstub-generic.cpp`'s default branch exports `SWELL_dllMain`
(`:135`), which only REAPER's *extension* loader calls. Nothing hands a VST3 plugin the
SWELL function table. That leaves two routes:
- **Route B3a — `SWELL_LOAD_SWELL_DYLIB`** (`swell-modstub-generic.cpp:69–131`): the stub
reads `/proc/self/exe`, strips to the directory, and `dlopen`s `libSwell.so` beside the
host binary (`:81–98`), then calls `SWELL_set_app_main(SWELLAppMain)` (`:112–114`). That
reference makes `SWELLAppMain` a **required definition in the plugin** — it is declared at
`swell-types.h:137` as "to be implemented by app (if using swellappmain.mm)". Whether
REAPER's Linux install ships a
`libSwell.so` beside its executable is `[verify — Linux]`, and this route makes the VST3
load-bearing on being hosted by REAPER specifically, which is consistent with D5's
REAPER-only stance but is a new runtime coupling to state explicitly.
- **Route B3b — build SWELL into the module.** `vendor/WDL/WDL/swell/Makefile:100–104`
enumerates the 14 SWELL TUs (`swell.o swell-ini.o swell-miscdlg-generic.o
swell-wnd-generic.o swell-menu-generic.o swell-kb-generic.o swell-dlg-generic.o
swell-gdi-generic.o swell-misc-generic.o swell-gdi-lice.o swell-generic-headless.o
swell-generic-gdk.o swell-appstub-generic.o swell-modstub-generic.o`) and `:106–107` the 8
LICE TUs it needs alongside. Link requirements at `:90` (`-lpthread -ldl`), `:128–130`
(pkg-config `gtk+-3.0` or `gdk-3.0`), `:145–151` (`freetype2` + `-lfontconfig`) and
`:154` (`-lGL`).
**This is a wholly new third-party dependency surface** — GDK/GTK3, FreeType, Fontconfig,
OpenGL — that the extension deliberately avoids via `SWELL_PROVIDED_BY_APP`. Flagging it
as a scope expansion, per the dispatch's constraint; it is not something to slip in.
**Effort L either way**, and B3b is the larger of the two by a wide margin.
- **B4 — the editor's platform contract changes.** The view must report
`kPlatformTypeX11EmbedWindowID` (`pluginterfaces/gui/iplugview.h:79`) instead of
`kPlatformTypeHWND` (`:62`), and timers/file-descriptors must go through
`Steinberg::Linux::IRunLoop` (`iplugview.h:267–279`) with `IEventHandler` (`:223–229`) and
`ITimerHandler` (`:239–245`) — the header states the reason at `:255–256`: "On Linux the
host has to provide this interface to the plug-in as there's no global event run loop
defined as on other platforms." The whole `namespace Linux` block is `#if SMTG_OS_LINUX`
(`:209`, closed `:284`), so it compiles in automatically. The **build-side** cost is nil
(the IIDs are already vendored — see §3); the **source-side** cost is `editor_platform.cpp`
and every timer in the editor, which is T2's surface. **Effort: build S, source L** — build
is S because no new CMake source is needed (the SDK block compiles in automatically); source
is L because it is a genuine window/run-loop rewrite (an X11 embed contract with no Win32
analogue, not a mechanical port) and outside this doc's own portability scope to size
further.
- **B5 — a settled product decision has to be reversed, in writing.** D5 ("Windows-only,
VST3-only, REAPER-only") is recorded as a locked decision with "a mac/Linux build" named
as a non-goal in `src/core/instrument/CLAUDE.md` (Invariants → the three locked decisions;
and again under Non-goals/guardrails) and `src/shell/instrument/CLAUDE.md`
(Non-goals/guardrails). `src/shell/panel/CLAUDE.md` carries a third dependent statement.
Fork B is not just more work — it invalidates three recorded invariants and needs Daniel's
explicit reversal before any code moves. **Effort S** — no code or CMake change of its own,
a rewrite of the three `CLAUDE.md` passages naming D5 plus Daniel's sign-off; the L-sized
cost sits in B3/B4, not here.
**The asymmetry worth naming.** Fork A's build work is small and its unknown is source
portability. Fork B's build work is genuinely large (B2, B3) *and* carries an unbounded
source-portability tail (B3b's dependency surface, B4's window/run-loop rewrite) *and*
requires reversing a settled decision. The two are not "the same phase, one bigger" — they
are different-shaped commitments.
---
## 5. Open questions
### `[verify — Linux]` — answerable by trying it on a Linux box
| # | Question | Exact check |
|---|---|---|
| V1 | Does the extension compile at all under GCC/Clang? | `cmake -B build -S . -G Ninja && cmake --build build 2>&1 \| tee build.log` — the single highest-information action available and gates most of T2's list too, with one caveat (Λ-09): a clean link is not the same guarantee here as on MSVC, since GNU `ld` does not error on undefined symbols in a `MODULE` by default — V1 answers "does it compile and link", not "does it load". |
| V2 | Does `ctest` pass all 91 targets? | `cmake -B build -S . -G Ninja && cmake --build build && ctest --test-dir build --output-on-failure` (no `-C` needed on Ninja). |
| V3 | Does REAPER's Linux build call `SWELL_dllMain` in a `reaper_*.so`, populating the API table? | Drop the built `.so` in `~/.config/REAPER/UserPlugins/`, restart, and check the extension's actions appear. A null table shows as immediate crash or dead actions. |
| V4 | Where exactly is `UserPlugins/` on Linux, and is `reaper_*.so` the right filename glob? | Options → Show REAPER resource path in a Linux REAPER. The SDK headers do not document either — grep of `vendor/reaper-sdk/sdk/` for `UserPlugins` and `reaper_*.so` returns nothing. |
| V5 | Does `panel_state.h:23`'s `<pthread.h>` actually require a link flag on the target glibc? | Build without `Threads::Threads`; if it links, it does not. |
| V6 | Does `-fvisibility=hidden` leave `ReaperPluginEntry` and `SWELL_dllMain` exported? | `nm -D --defined-only reaper_reasampler.so \| grep -E 'ReaperPluginEntry\|SWELL_dllMain'` after adding the preset. |
| V7 | With Λ-01 fixed by the resource-id-0 route, does `SWELL_CreateDialog` return a usable child HWND for the docker? | Panel toggle action in a Linux REAPER. |
| V8 | Does `std::filesystem` need `-lstdc++fs` on the chosen toolchain? | Build `capture_paths_tests` alone; the link error names it. |
| V9 | Does REAPER's Linux install ship a `libSwell.so` beside its executable (Fork B, route B3a)? | `ls $(dirname $(readlink -f $(which reaper)))/libSwell.so`. |
| V10 | Which `uname -m` values must the VST3 bundle carry (Fork B, B2)? | `uname -m` on each target. `module_linux.cpp:158–163` keys the bundle directory off exactly this string (tree-grounded and verified); which architectures REAPER itself ships for Linux (x86_64, aarch64, armv7l is the claim) is an external fact with no source in this tree — `[verify]` against REAPER's own download page before relying on it. |
### `[Daniel]` — genuine product/scope calls
| # | Question | Why it is not answerable by reading code |
|---|---|---|
| D1 | **Fork A or Fork B?** Extension only, or extension + ReaSampler 9000 on Linux? | §4 states both costs. The choice is scope, and D5 makes it a reversal of a recorded decision, not a technical lookup. |
| D2 | If Fork B: **route B3a (dlopen the host's `libSwell.so`, requires defining `SWELLAppMain`) or B3b (vendor and build full SWELL, adds GDK/GTK3 + FreeType + Fontconfig + OpenGL)?** | B3b is a dependency-surface expansion; the dispatch requires that be flagged rather than chosen. B3a is cheaper but couples the plugin's UI to being hosted by REAPER specifically. |
| D3 | Is **macOS in or out** of the same phase? | Λ-01, Λ-03, Λ-04, Λ-07 and Λ-09 are all marked *shared macOS/Linux* at their own sections above (Λ-01: identical broken comment block, `src/app/CMakeLists.txt:83–86` vs `:94–97`, and shared `swell_resgen.php` output per `README.md:120`; Λ-03/04/07/09: same mechanism under the APPLE branch, detailed at each). Doing both at once is cheaper than doing them serially — but that is a scope call, and macOS additionally implies signing/notarization (not mentioned anywhere in `versioning-and-release.md`) plus its own open question this doc does not resolve: whether `swell-modstub.mm` (`src/app/CMakeLists.txt:79`) even compiles under a CXX-only `project()` (`CMakeLists.txt:26`, no `OBJCXX`) — see §1a. |
| D4 | Does **CI get built in this phase**, and on what runner? | `versioning-and-release.md:307–311` and `:361–363` hand "the pipeline" to dev-ops and commit to three platform artifacts per channel, but no CI exists in the repo on any platform. Adding it is infrastructure and needs an explicit ask. |
| D6 | Is the Linux artifact **shipped or developer-only** for 1.x? | Determines whether Λ-02 (Release build) and Λ-08 (install path) are must-fix or nice-to-have, and whether a Linux `install()` rule is worth authoring. (Numbered D6, not D5, to avoid colliding with the settled product decision D5 — "Windows-only, VST3-only, REAPER-only" — cited above at §1b and B5.) |
| D7 | Λ-01's fork: **resource-id-0 escape hatch, or the resgen route?** §6 Stage 2 gates on T2's read of `panel_window.cpp`, and V7 presupposes the route is already picked. | It is a source-code + build-pipeline tradeoff (a `panel_window.cpp` DLGPROC→WNDPROC change vs. a PHP build step + generated-file handling) with no code-only right answer — needs Daniel's call once T2 reports, same as D1/D2. |
Deliberately **not** listed as `[Daniel]`, because reading more would settle them: whether
`arrange_drop_win.cpp`/`instrument_drop_win.cpp` need platform gating (read the files — T2);
whether the SDK's `moduleinfo.json` is required (it is not — `module_linux.cpp:362–364`);
whether the Linux run-loop IIDs need a new SDK TU (they do not — `commoniids.cpp:50–54`).
---
## 6. Ordering sketch
Dependency order only — this is sequencing input for a plan author, not the plan.
**Stage 0 — the one action that reprices everything.** Run V1 and V2 on a Linux box against
the tree as-is. Configure will succeed (nothing in the CMake requires Windows); the compile
will produce a diagnostic set that is the actual size of this phase. Every band below is
provisional until this is done. Λ-10's doc fix rides along free, since the person doing this
will hit it first.
**Stage 1 — toolchain floor, no source dependency.** Λ-02 (`CMAKE_BUILD_TYPE` default),
Λ-03 (visibility presets), Λ-04 (`Threads::Threads`), Λ-09 (warning flags + `CXX_EXTENSIONS
OFF`), Λ-05 (pin the `WDL_INC` coincidence), Λ-07 (compiler floor). All are root- or
target-property edits with no ordering constraint among them and none touching source. Doing
them *before* Stage 2 means the resource work is done under warnings rather than retrofitted
into them. Ship as one change.
**Stage 2 — the panel resource decision.** Λ-01. This forks on the resource-id-0 question
(§2, Λ-01) and therefore needs T2's read on `panel_window.cpp` first — so it is gated on T2
output, not on Stage 1. Whichever route wins, it is a shared macOS/Linux fix (see D3).
**Stage 3 — source partition.** Λ-06. Once T2 names which TUs need a platform branch or a
non-Windows sibling, the source list in `src/app/CMakeLists.txt:8–51` gains its
partition. Strictly after T2 and after Stage 2 (the resgen/shim TU, if that route is taken,
is one of the entries).
**Stage 4 — packaging.** Λ-08, plus whatever D6 decides. Depends on Stage 1 (there is no
point documenting an install path for an unoptimized artifact) and on V4.
**Stage 5 — Fork B, only if D1 says so.** Internally ordered: B1 (entry point swap, S) →
B3 (SWELL strategy per D2 — this gates everything downstream, because a module that cannot
draw cannot be tested) → B2 (bundle layout + install, needs V10) → B4 (X11 embed + run loop,
mostly T2's source work). B5 (the D5 reversal) precedes all of them as a documentation act.
---
## 7. Referred to T2
Source-level items I noticed while reading build files. **Recorded, not analyzed** — the
parallel track owns each of these and I have deliberately not investigated further.
1. `src/shell/panel/panel_window.cpp:135` — `CreateDialogParam` + `MAKEINTRESOURCE(IDD_BANK_PANEL)`.
Under SWELL this is `SWELL_CreateDialog(SWELL_curmodule_dialogresource_head, …)`. Relevant
to Λ-01's resource-id-0 option, which requires the proc to be a `WNDPROC` returning
`LRESULT`, cast to `DLGPROC` (`swell-functions.h:606–608`).
2. `src/shell/actions/arrange_drop_win.cpp` and `src/shell/actions/instrument_drop_win.cpp` —
zero `_WIN32` occurrences, no `<windows.h>`, yet `_win`-suffixed. Confirm they are
genuinely portable, or add guards.
3. `src/shell/actions/drag_out_win.cpp:249–282` — the `#else` "macOS / Linux (SWELL)" branch
exists but has never been compiled. Whether the SWELL drag path is functionally equivalent
to the Win32 `IDataObject`/`IDropSource` path is unaudited.
4. `src/shell/persist/prune_fs.cpp:36` — `<windows.h>` behind two `_WIN32` guards. Confirm the
non-Windows deletion path exists and is equivalent (this file is on the only
file-deletion path in the product, per `src/core/reclaim/CLAUDE.md`).
5. `src/shell/panel/draw_kit.cpp:11–15`, `draw_kit.h:27–29`, `src/shell/panel/panel_state.h:18–26` —
the `windows.h`-vs-`swell/swell.h` include switches. These look correct; whether the
SWELL subset actually covers every GDI call the kit makes is the question.
6. `src/shell/panel/CLAUDE.md` records "Windows-only (D5) — font/GDI/HFONT choices assume
Windows; no cross-platform font-fallback concern" as an invariant. Font selection on
Linux SWELL (FreeType/Fontconfig-backed) is the concrete instance.
7. `src/core/capture/capture_paths.cpp` — `normalizeSlashes` lowercases on `_WIN32` only, and
`tests/test_capture_paths.cpp:19–46` already encodes the case-sensitive POSIX contract.
The test is written; the behaviour under a case-sensitive filesystem is unverified.
docs/product/audit-notes/lambda-w1-t2-source-runtime.md
+792
View File
@@ -0,0 +1,792 @@
# Λ-W1 Track 2 — source/runtime Linux-portability audit
Static analysis of `src/**/*.{cpp,h}` (293 files) plus the vendored SWELL / WDL / LICE /
REAPER-SDK / VST3-SDK headers those files consume, 2026-08-02, branch
`pl-w1-t2-source-runtime-audit` (cut from `dev` at 6e937b9). Answers one question: **what in
the source blocks or degrades a Linux build/run**, for the extension (`reaper_reasampler`) and,
separately, for the ReaSampler 9000 VST3 instrument (`reasampler_vst`).
Build-system surface (CMake, `cmake/`, resgen as a *build step*, vendor configuration,
packaging, install) is a parallel track's; anything spotted here is listed under
**§7 Referred to T1** rather than analyzed. macOS is out of scope except where a Linux fix
shares its path — noted inline, one line, never a separate finding.
**Evidence discipline.** Every capability claim about SWELL / LICE / the REAPER SDK / the VST3
SDK cites the vendor file it was read in. The author is on Windows and **cannot build or run on
Linux**: nothing below was compiled or executed on Linux. Claims that need a Linux box carry
`[verify — Linux]` with the exact check. Line numbers were re-read against the working tree
immediately before writing.
---
## 1. Baseline — the portability posture today, by layer
### 1.1 `core/` — genuinely portable. Verified, not assumed.
Two independent checks, both exhaustive over the directory:
- **Include surface.** Every `#include` in `src/core/**` is either a `"core/…"` sibling, one of
26 standard-library headers, or the CMake-generated `version_generated.h`
(`src/core/version/app_version.cpp:12`, `src/core/wire/reasampler_uid.h:13`). **Zero** REAPER,
SWELL, WDL, LICE, VST3-SDK, `windows.h`, or other vendor includes. The 26 headers are
`<algorithm> <array> <atomic> <cassert> <cctype> <cerrno> <climits> <cmath> <cstddef>
<cstdint> <cstdio> <cstdlib> <cstring> <filesystem> <fstream> <limits> <map> <optional>
<set> <sstream> <string> <type_traits> <unordered_map> <unordered_set> <utility> <vector>` —
all C++17, all present on libstdc++/libc++.
- **Preprocessor surface.** The whole of `core/` contains exactly **nine** preprocessor
conditional lines, in three places: the channel fork (`core/wire/reasampler_uid.h:29,34,39`),
two `NDEBUG` assert guards (`core/view/view_mode_model.cpp:326,328,331,334`), and **one**
platform conditional — `core/capture/capture_paths.cpp:18–20`, the Windows-only case-fold in
`normalizeSlashes`. That is the entire platform-dependence of the pure core.
Byte-order is explicitly handled rather than assumed: `core/wire/bytes.h:26–31,62–74` builds and
reads little-endian by shift, not by `memcpy` of a native integer, so it is byte-order-neutral
by construction. `core/capture/wav_codec.h:52–53` states the one real assumption ("target is
x86/ARM-LE only, no big-endian byte-swap") and `wav_codec.cpp:165–168` memcpys floats under it —
correct on x86-64 and aarch64 Linux alike.
Sweeps that returned **nothing** across `src/core` **and** `src/app`: `sprintf_s`/`strcpy_s`/
`_stricmp`/`_snprintf`/`_alloca`/`__forceinline`/`__declspec`/`#pragma comment`/`#pragma warning`/
`#pragma pack`/`__int64`/`LPSTR`/`LPCSTR`/`LPWSTR`/`wchar_t`/`TCHAR`/`_T(`/`MAX_PATH`. There is
**no** `#pragma` of any kind anywhere in `src/**` other than `#pragma once`, and no
`__attribute__` / `__declspec` / anonymous-struct extension.
`long` appears in a handful of pure modules (`core/ui/card_meta.cpp:39–41,55`,
`core/instrument/ui/envelope_overlay.cpp:45`). All are local computations from clamped doubles;
LP64's wider `long` is strictly safer than LLP64's. One stale comment
(`core/instrument/ui/envelope_overlay.cpp:19`, "a huge t would overflow a 32-bit long") is
Windows-specific but the clamp it describes runs regardless. Not a defect.
**Verdict: `core/` builds and behaves identically on Linux.** The one conditional
(`capture_paths.cpp:18`) is *correct* for Linux — case-sensitive paths must not be folded — and
the pure tests already assert both branches (`tests/test_capture_paths.cpp:19–33,41–51`), which
is direct evidence the pure layer was written with a non-Windows target in mind.
### 1.2 `tests/` — portable.
91 test TUs. Only `tests/test_capture_paths.cpp` forks on `_WIN32`, and it asserts the
non-Windows behaviour explicitly (lines 28–33, 50–51). A `C:\`/`C:/` grep over `tests/` hits
six files total, one of which is `test_capture_paths.cpp` itself; the five OTHER files — every
hit opaque *string data* fed to a pure function
(`test_bank_model.cpp:186–187,243–245`, `test_bake_wire.cpp:77`, `test_drag_out.cpp:291–293,388`,
`test_origin_ledger.cpp:56`, `test_sample_usage.cpp:502`) — are not platform behaviour. They pass
identically on Linux.
### 1.3 `app/` — portable.
`src/app/main.cpp` is one TU of pointers + entry + dispatch. `REAPER_PLUGIN_DLL_EXPORT` and
`REAPER_PLUGIN_HINSTANCE` are already GCC/Clang-correct in the SDK
(`vendor/reaper-sdk/sdk/reaper_plugin.h:52–53` → `__attribute__((visibility("default")))` and
`void *`), and `REAPER_PLUGIN_ENTRYPOINT` is platform-neutral (`:56`). No Win32 call, no Win32
type, no conditional. The one hazard is behavioural, not structural — see **L2-03**.
### 1.4 `shell/` — the whole cost sits here, and it is unevenly distributed.
65 platform-token lines across 30 of the 293 source files (grep:
`_WIN32|WIN32|__APPLE__|_MSC_VER|__linux__|__GNUC__|_WIN64` over `src/**/*.{cpp,h}`). Their
distribution is the story:
| Area | Lines | Shape |
|---|---|---|
| `shell/instrument/` (VST3 editor + embed) | 51 of 65 | Whole-TU `#ifdef _WIN32` … `#endif` — Windows-only by design |
| `shell/panel/` | 8 | Include-selection + two small `#else` bodies |
| `shell/persist/`, `shell/capture/`, `shell/actions/` | 4 | Trash fallback, `localtime_r`, the SWELL drag-out branch |
| `core/` | 2 | The case-fold |
Two `shell/` directories are absent from this table because they were swept and came back
completely clean, not because they went unchecked: `shell/view/` and `shell/bank_ops/` both
return **zero** hits on the same grep (confirmed). Naming them here, since the table above is
by hit-count and gives a reader no way to tell a zero-hit sweep from an unswept directory.
`src/resource.h` and `src/ext_keys.h` mention platform names only in comments — zero hits on
this specific grep (re-run and confirmed), so they are not a row of this distribution; see
`resource.h`/`resource.rc` under §7 for their actual (build-system) relevance.
The extension's guards are all *complete*: every `#ifdef _WIN32` that gates a **definition**
has an `#else` (`draw_kit.cpp:12`, `capture.cpp:218`, `panel_audition.cpp:36,58`,
`panel_state.h:20`, `prune_fs.cpp:169`, `drag_out_win.cpp:8`); the ones without an `#else`
gate only an `#include` or a single statement (`panel_window.cpp:19,148`, `prune_fs.cpp:35`,
`draw_kit.h:27`, `capture_paths.cpp:18`). **There is no undefined-symbol gap from this guard
structure** — every `#ifdef` that needs an `#else` has one. This is narrower than "no
undefined-symbol gap in the extension" full stop: L2-02's `GetCurrentProcessId`
(`instrument_drop_win.cpp:59`) is an undefined symbol on Linux precisely because it carries
**no** `#ifdef` at all, so it falls outside what this guard-completeness check measures.
The instrument's guards are complete in the opposite direction: `reasampler_editor.h:156–269`
wraps the entire paint/input/timer/`wndProc`/`invalidate` family in `#ifdef _WIN32`, and
`editor_platform.cpp:298–306` stubs only the three IPlugView overrides that must exist. Every
`invalidate()` call site is inside a guard (verified exhaustively over `src/shell/instrument/`:
53 call sites across eight files — `editor_input.cpp` (5), `editor_input_browse.cpp` (11),
`editor_input_chrome.cpp` (10), `editor_input_curve.cpp` (4), `editor_input_deck.cpp` (9),
`editor_input_waveform.cpp` (4), `editor_platform.cpp` (3, excluding the definition itself at
`:65`), and `editor_session.cpp` (7, at 119, 126, 139, 141, 150, 156, 174, excluding a
same-named mention inside a comment at `:106`) — each file whole-file- or whole-region-guarded
by `#ifdef _WIN32` (e.g. `editor_input_browse.cpp:8` … `:177`); `reasampler_editor.h:266` is
the declaration, not a call site. `editor_controls.cpp`, `editor_models.cpp`,
`instrument_bake.cpp` have zero call sites, confirmed). So the editor *links* off Windows — it
just does nothing.
### 1.5 What the platform layer actually provides (vendor-verified)
The extension's non-Windows path is SWELL-provided-by-host
(`SWELL_PROVIDED_BY_APP` → function pointers resolved through `SWELL_dllMain`,
`vendor/WDL/WDL/swell/swell-modstub-generic.cpp:135–145`). `[verify — Linux]` **What is stated
here about REAPER's own `libSwell.so` is only evidence about WDL's own Makefile, not about what
Cockos actually ships** — `vendor/WDL/WDL/swell/Makefile:100–107,141–151` shows
`swell-gdi-lice.o`/`-DSWELL_LICE_GDI` built whenever GDK is enabled (`ifndef NOGDK`, `:111`),
with `-DSWELL_FREETYPE` gated behind `ifndef NOFREETYPE` (`:144`) and `-lfontconfig` gated a
level deeper behind `ifndef NOFONTCONFIG` (`:149`) — i.e. the Makefile makes the LICE-backed,
freetype/fontconfig SWELL the *default* build, not a certainty about the binary REAPER
distributes. **Every downstream claim built on "REAPER's Linux SWELL is the fontconfig-backed
GDK build" inherits this same unstated assumption** — that includes L2-09's entire mechanism,
the GDK-backend evidence cited for L2-07, and the cursor (`GDK_*`) / modifier-key
(`GetAsyncKeyState`) claims below, none of which are re-flagged individually; this paragraph is
their one shared source of doubt. Contrast with the null stub in `swell-gdi-generic.cpp`
(`#ifndef SWELL_PROVIDED_BY_APP`, line 24), which is not in play for a REAPER-hosted extension
either way.
Everything the panel layer calls was checked by name against
`vendor/WDL/WDL/swell/swell-functions.h` and `swell-types.h`. Present and real:
- Window/dialog: `SWELL_CreateDialog` behind the `CreateDialogParam` macro
(`swell-functions.h:616,619`), `DestroyWindow`, `SetFocus`, `GetFocus`, `GetParent`,
`GetCapture`/`SetCapture`/`ReleaseCapture`, `IsWindowVisible`, `InvalidateRect`,
`ScreenToClient`/`ClientToScreen`, `BeginPaint`/`EndPaint`, `SetTimer`/`KillTimer`,
`GetWindowLong`/`SetWindowLong` (`:319–320`), `SetWindowPos` (`:286`).
- Messages/macros: `GET_X_LPARAM`, `GET_Y_LPARAM`, `HIWORD`, `MAKEINTRESOURCE`
(`swell-types.h:1220`), `PAINTSTRUCT`, `MSG` (`:262`), `SRCCOPY`, `WM_PAINT`, `WM_MOUSEMOVE`,
`WM_MOUSEWHEEL`, `WM_CAPTURECHANGED`, `WM_DROPFILES`, `WM_KEYDOWN`, `WM_TIMER`,
`WM_ERASEBKGND`, `TPM_RETURNCMD`, `MF_*`, `MB_*`, `ID*`, every `VK_*` used.
- `WM_MOUSEWHEEL` really does carry **screen** coords in `lParam` on the GDK backend — the
comment at `panel_window.cpp:100–102` is correct (`swell-generic-gdk.cpp:1442`).
- `WM_CAPTURECHANGED` really is delivered on capture loss (`swell-generic-gdk.cpp:1795`,
`swell-wnd-generic.cpp:7141,7150`), so the panel's rollback handler
(`panel_window.cpp:90–98`) has a live trigger.
- Cursors: `LoadCursor`→`SWELL_LoadCursor` (`swell-functions.h:728–730`), `SetCursor`
(`:740–741`), and **all seven** IDCs the panel uses map to real GDK cursors —
`IDC_ARROW`→`GDK_LEFT_PTR`, `IDC_HAND`→`GDK_HAND1`, `IDC_UPARROW`→`GDK_CENTER_PTR`,
`IDC_SIZEWE`→`GDK_RIGHT_SIDE`, `IDC_SIZEALL`→`GDK_FLEUR`, `IDC_IBEAM`→`GDK_XTERM`,
`IDC_NO`→`GDK_PIRATE` (`swell-generic-gdk.cpp:3736–3748` vs `panel_drag.cpp:141–147,159–161`).
- `GetAsyncKeyState` returns the `0x8000` high bit for `VK_CONTROL`/`VK_SHIFT`/`VK_MENU`
(`swell-generic-gdk.cpp:2439–2441`), so `panel_state.h:409–411` works verbatim.
- `GetTickCount` is SWELL-provided (`swell-functions.h:81`), so `panel_drag.cpp:308,324` — the
only unguarded Win32-looking calls in the panel — are fine.
- `SWELL_InitiateDragDropOfFileList` **does exist on Linux**, and is a GDK implementation on
the GDK backend: `swell-generic-gdk.cpp:3563–3592` sets up a hidden drop-source window and
spins a nested `SWELL_RunMessageLoop` until capture drops, with a 500 ms no-motion timeout;
the actual `gdk_drag_begin` call is inside the shared `dropSourceWndProc` helper it invokes
(`:3446`), not textually inside the `3563–3592` range itself. The headless backend defines
the **same-named function as an empty no-op stub** —
`swell-generic-headless.cpp:246–248` is `void SWELL_InitiateDragDropOfFileList(...) { }` — so
the "not a stub" framing only holds for the GDK backend specifically. The two backends are
mutually exclusive (`swell-generic-headless.cpp:28` is `#ifndef SWELL_TARGET_GDK`), so nothing
breaks in a GDK build, but a reader should not take "does exist on Linux" to mean "is
implemented in every Linux SWELL backend." macOS (`swell-dlg.mm:3534`) also defines it; it is
declared at `swell-functions.h:1011`.
- LICE itself is portable: `lice.h:31` includes `swell-types.h` off Windows, `lice.cpp:22`
includes `swell.h`, `LICE_SysBitmap::__resize` has a SWELL framebuffer path
(`lice.cpp:179–182`), and `LICE_CachedFont::DrawTextImpl` carries real non-Windows branches
(`lice_textnew.cpp:236–249,829,1027–1028,1040`).
Absent from SWELL, verified by grep over `vendor/WDL/WDL/swell/`: `FF_DONTCARE` (**zero hits
anywhere in `vendor/WDL/`**), `GetCurrentProcessId` (only `GetCurrentThreadId`,
`swell-functions.h:822`), `GetKeyState`, `WM_MOUSELEAVE`/`TrackMouseEvent`, `DragAcceptFiles`,
`RegisterClass*`, `CreateWindowEx*`, `DefWindowProc*`, `MoveWindow`,
`GetWindowLongPtr`/`SetWindowLongPtr`, `WHEEL_DELTA`, and any move-to-trash surface.
---
## 2. Findings
### L2-01 — `FF_DONTCARE` does not exist off Windows; `draw_kit.cpp` will not compile
**Location:** `src/shell/panel/draw_kit.cpp:73` (`DEFAULT_PITCH | FF_DONTCARE`), reached on
non-Windows through `draw_kit.cpp:12–16` (which includes `swell/swell.h`, **not** `windows.h`).
**Mechanism.** `swell-types.h` defines `DEFAULT_PITCH`, `DEFAULT_CHARSET`,
`OUT_DEFAULT_PRECIS`, `CLIP_DEFAULT_PRECIS`, `DEFAULT_QUALITY`, `FW_BOLD`, `FW_NORMAL`,
`FW_SEMIBOLD`, `TRANSPARENT` and every `DT_*` the kit uses — but **not** `FF_DONTCARE`. A grep
for `FF_DONTCARE` over the whole of `vendor/WDL/` returns nothing; on Windows it comes from
`<wingdi.h>` via `windows.h`. `draw_kit.cpp` is not platform-guarded (only its *include* is), so
the `CreateFont` call is compiled on every platform.
**Severity: Blocker** — `error: 'FF_DONTCARE' was not declared in this scope` at
`draw_kit.cpp:73`; `draw_kit` is linked into both loadable modules, so the extension does not
build at all.
**Effort: S** — the argument is `DEFAULT_PITCH | FF_DONTCARE`, and `FF_DONTCARE` is 0x00 in
wingdi.h; the family bits are advisory to Windows' font mapper and meaningless to fontconfig.
**Direction.** Drop the `| FF_DONTCARE` term, or define it locally in the non-Windows include
branch. Do not add `windows.h`.
### L2-02 — `GetCurrentProcessId()` is called with no platform branch and SWELL does not export it
**Location:** `src/shell/actions/instrument_drop_win.cpp:59` (temp `.vstpreset` filename). The TU
has **no** `_WIN32` conditional anywhere (verified: its only `#include`s are `<atomic> <cstdint>
<filesystem> <fstream> <string> <system_error> <vector>` plus project/SDK headers, lines 6–27).
**Mechanism.** On non-Windows the declaration would have to come from `reaper_plugin.h` →
`swell.h`. `swell-functions.h` declares `GetCurrentThreadId` (`:822`) and no
`GetCurrentProcessId`; the only two occurrences in the whole WDL tree are inside
`WDL/shm_msgreply.cpp:26` and `WDL/win32_utf8.c:244`, neither of which is a SWELL export.
**Severity: Blocker** — `error: 'GetCurrentProcessId' was not declared in this scope`; the
extension does not build.
**Effort: S** — the PID exists only to keep two concurrent REAPER instances from colliding in
the shared temp dir (comment at `:56–57`). `getpid()` behind a guard, or the already-imported
`GetCurrentThreadId()` plus the existing atomic counter, satisfies the same requirement.
**Direction.** Replace with a platform-neutral uniqueness source; the atomic counter at `:52`
already carries the intra-process half.
### L2-03 — `REAPERAPI_LoadAPI` is all-or-nothing over ~869 API names and fails silently
**Location:** `src/app/main.cpp:292–293` (`if (REAPERAPI_LoadAPI(rec->GetFunc) != 0) return 0;`).
`main.cpp` does **not** define `REAPERAPI_MINIMAL`, so the full table is loaded
(`vendor/reaper-sdk/sdk/reaper_plugin_functions.h:44–48`; 1738 `REAPERAPI_WANT_` guards ≈ 869
entries).
**Mechanism.** The SDK's loader accumulates one `failcnt` across the entire table
(`reaper_plugin_functions.h`, `REAPERAPI_LoadAPI` body: `failcnt += !(*table[i].dest =
getAPI(table[i].name)); return failcnt;`). If a Linux REAPER build does not export *any single
one* of those 869 names, `main.cpp` returns 0 and the extension never loads — with **no console
message, no log line, nothing**. The SDK header carries no "Windows only" annotation on any
entry (grep for `windows only|win32 only|not on mac|not on linux` returns nothing), so nothing
here says a gap exists — but nothing rules it out either, and the failure mode is maximally
opaque.
**Severity: Blocker (conditional)** `[verify — Linux]` — a silent load refusal with no
diagnostic is the worst possible first-run experience for a port. **Scope note:** the
all-or-nothing mechanism itself is identical on Windows too
(`reaper_plugin_functions.h:45–46` — "an older version of REAPER may not succeed in loading",
no platform fork in the loader) — nothing about the *mechanism* is Linux-specific, only whether
*this particular* build happens to be missing an entry is unknown. Graded here as a Linux
Blocker on failure-mode quality alone (per the Mechanism above), the same axis L2-04 is
graded on below, despite L2-04's mechanism being certain rather than speculative — see L2-04's
calculus note. Arguably this belongs as a cross-platform robustness note rather than a
Linux-exclusive finding; left here because the fix is trivial and worth doing regardless of
platform.
**Effort: S** — confirmed against the two Direction options below: the `ShowConsoleMsg`
diagnostic is one new line on the existing failure branch (`main.cpp:293`), and the
`REAPERAPI_MINIMAL` swap follows a pattern already used elsewhere in this codebase
(`panel_window.cpp:26–31`, `panel_audition.cpp:12–16`) rather than inventing a new one.
**Direction.** Either switch `main.cpp` to `REAPERAPI_MINIMAL` + an explicit `WANT` list (the
other TUs already do this — e.g. `panel_window.cpp:26–31`, `panel_audition.cpp:12–16`), or keep
the full load but print the failure count via `rec->GetFunc("ShowConsoleMsg")` before returning
0. The minimal list is also the honest inventory of what this extension actually needs.
### L2-04 — every persisted floating-point number is `LC_NUMERIC`-dependent, in both directions
**Location (writers):** `src/core/json/json.cpp:39–43` (`%.17g` — the bank index, view model and
tracking ledger all serialize through it), `src/core/model/provenance.cpp:40` (`%.17g` — the
provenance blob inside the bank JSON). Two writers, not three: `tail_control.cpp:74` is a
comment describing the format ("Byte-identical to the former snprintf writer:
`{"mode":%d,"manualMs":%.17g}`"), not a write site — the actual per-project tail-setting write
is `tail_control.cpp:78–79`, which already goes through `json::numToStr` (the same
`json.cpp:39–43` codec cited above), so it is the same writer, not a third one.
**Location (readers):** `src/core/json/json.cpp:190–196` (`std::strtod`),
`src/core/wire/wire.cpp:121–130` (`Cursor::fieldDouble`, `std::strtod`),
`src/core/capture/render_settings.cpp:178–186` (`std::stod` over REAPER's own `P_RAZOREDITS`).
**Mechanism.** `snprintf("%.17g")`, `strtod` and `stod` all honour `LC_NUMERIC`. Under a
comma-decimal locale the writers emit `1,5`, which makes the bank JSON *structurally invalid*
(an extra separator inside an object) — the whole index fails to parse on the next load. The
readers are honestly fail-closed (all three require whole-token consumption:
`json.cpp:194`, `wire.cpp:127`, `render_settings.cpp:184`), so they degrade to "malformed"
rather than silently truncating — but that means a razor range or a bank field simply
disappears. On Windows the CRT's start-up locale is `"C"` and nothing in this codebase calls
`setlocale`, which is why this has never fired. On Linux the process locale is far more likely
to be set by something else in the address space: SWELL's GDK backend calls `gtk_init_check`
when built with `SWELL_SUPPORT_GTK` (`swell-generic-gdk.cpp:366`; the `#else` branch uses
`gdk_init_check`, `:368`) and **never** calls `gtk_disable_setlocale` (grep over
`vendor/WDL/WDL/swell/` returns no hit), and any GTK/Qt-based plugin loaded into the same
process can do the same.
**Severity: Major** — builds and runs; under a non-C `LC_NUMERIC` the bank index is written
unparseable and the project's whole bank is lost on reload. **Calculus note:** unlike L2-03
(graded Blocker above on zero direct evidence, purely on failure-mode quality), this finding's
mechanism is confirmed by reading the actual writer/reader call sites, and its failure mode —
the entire bank index becomes unparseable — is at least as severe as L2-03's. It is graded only
Major here because it additionally requires a non-C `LC_NUMERIC` in the hosting process, a
likelihood factor L2-03 does not apply to its own claim. Reading both on the same axis (either
both by failure-mode quality, or both by likelihood) would put them closer together than
Blocker/Major suggests; resolving that is a scope call for whoever prioritizes the two, not a
fact this audit can settle statically.
**Effort: M** — two writers and three readers, all in `core/`, all unit-testable; the fix is
a locale-independent path (`std::to_chars`/`std::from_chars`, C++17, or an explicit
`std::locale::classic()`-bound stream), not a `setlocale` call in a plugin.
**Direction.** Make the number codec locale-independent at its two writers and three readers;
add a pure test that pins the emitted text for a fractional value. Do **not** "fix" this by
calling `setlocale` — an extension must not mutate the host's locale.
`[verify — Linux]` — read `LC_NUMERIC` inside a running REAPER-Linux process (e.g.
`ShowConsoleMsg(setlocale(LC_NUMERIC, nullptr))`) before sizing the work.
### L2-05 — prune loses the Recycle Bin *and* the "file is locked" backstop at the same time
**Location:** `src/shell/persist/prune_fs.cpp:167–209`; the non-Windows branch is `:200–208`.
**Mechanism.** Two Windows properties are load-bearing for the deletion authority and neither
survives. (a) The Windows path routes through `SHFileOperationW` + `FOF_ALLOWUNDO` (`:186–188`)
— deletions are recoverable from the Recycle Bin; the `#else` is a hard `fs::remove` (`:203`).
The header already states this honestly (`:30–34`, `:162–166`). (b) Less obviously, the failure
taxonomy at `:205` (`if (ec) return false; // real failure (locked/permission) -> skip`) encodes
**Windows** file-sharing semantics: a bank file currently open by REAPER's audio engine (an
active `PCM_source`, an item playing from it) cannot be deleted on Windows, so it is counted as
"skipped". On Linux `unlink()` on an open file succeeds — the directory entry vanishes while the
open fd keeps playing, and when the fd closes the bytes are gone with no trash to recover from.
So the Linux prune can delete a file that is *audibly in use*, silently, and the user's only
recovery floor (the superseded-file-survives-until-prune rule, root `CLAUDE.md` §resample bake)
now has nothing under it.
**Severity: Major** — irreversible user-data loss where the Windows build is recoverable; the
"locked" skip branch is dead code on Linux.
**Effort: M** — trash is genuinely non-portable, but the XDG trash spec (`~/.local/share/Trash`
with a `.trashinfo` sidecar) is a self-contained move-plus-metadata write, and the confirm gate
already exists upstream.
**Direction.** Either implement an XDG-trash move in the `#else` (preferred — the deletion
authority is a single ~40-line function and this is exactly where the platform seam belongs), or
make the prune confirmation text platform-aware so a Linux user is told the deletion is
permanent. Do not leave the current silent asymmetry.
### L2-06 — the docked panel never opens on Linux, and fails silently when it doesn't
**Location:** `src/shell/panel/panel_window.cpp:135–137`.
**Mechanism.** `CreateDialogParam(g_hInst, MAKEINTRESOURCE(IDD_BANK_PANEL), …)` maps on SWELL to
`SWELL_CreateDialog(SWELL_curmodule_dialogresource_head, (resid), …)`
(`swell-functions.h:616,619`) — it resolves the template out of a per-module registry populated
by the **resgen-generated source**, not out of a linked `.rc`. That generated source is not
currently part of the Linux target (the `target_sources` line is commented out;
build-system detail → §7). The source-side consequence is what matters here: `SWELL_CreateDialog`
returns `nullptr`, `panel_window.cpp:137` does `if (!g_panel.hwnd) return;`, and the toggle
action is a **silent no-op** — no console line, no message box, and `bankPanelIsOpen()` keeps
reporting false so the Actions-list checkmark never lights. The user's only symptom is "the
button does nothing." Note also that `MAKEINTRESOURCE` becomes `((const char*)(UINT_PTR)(x))` on
SWELL (`swell-types.h:1220`), so the id is a pointer-shaped integer — the resgen output must
agree on `IDD_BANK_PANEL == 1000` (`src/resource.h:8`).
**Severity: Major** — the extension loads, every action works, and the primary UI surface is
absent with no diagnostic.
**Effort: S** on the source side (one failure branch), separate from T1's resgen wiring.
**Direction.** Add a one-line `ShowConsoleMsg` on the `!g_panel.hwnd` path naming the missing
dialog resource. That single line converts a mystery into a two-minute diagnosis and is worth
having on Windows too.
### L2-07 — file-drop ingest onto the panel has no opt-in on SWELL
**Location:** `src/shell/panel/panel_window.cpp:145–150` (the `DragAcceptFiles` call is
`#ifdef _WIN32`), handler at `:47–61,65–67`.
**Mechanism.** The comment at `:145–147` is accurate — SWELL exposes no `DragAcceptFiles`
(grep over `vendor/WDL/WDL/swell/` finds only `DragQueryFile` and `DragFinish`,
`swell-functions.h:1006–1007`). What the comment does not say is *how* a drop would arrive
instead. Reading the GDK backend: on a URI-list selection-notify, SWELL resolves the top-level
window, walks down with `ChildWindowFromPoint` (which **is** descending — `for(;;)` loop,
`swell-wnd-generic.cpp:6956–6981`), and `SendMessage(cw, WM_DROPFILES, (WPARAM)gobj, 0)`
(`swell-generic-gdk.cpp:1622`). The default child proc forwards an *unhandled* `WM_DROPFILES`
up to the parent only when the window *lacks* `WS_EX_ACCEPTFILES`
(`swell-wnd-generic.cpp:7681`) — but that bit's only effect is to **suppress** the up-forward;
it does not enable acceptance, and the message already reaches the window under the pointer via
the `ChildWindowFromPoint` descent regardless of the bit's state. So the panel's own `dlgProc`
plausibly receives the drop **without any opt-in at all**, but the earlier "ex-style bit, not
an API call" framing was backwards about what the bit does. The real SWELL opt-in surface for
`WS_EX_ACCEPTFILES` is the dialog *resource*, not a runtime call: `swell_resgen.pl:10` and
`swell_resgen.php:204` translate a dialog's `WS_EX_ACCEPTFILES` style to
`SWELL_DLG_WS_DROPTARGET`, and `swell-dlg-generic.cpp:320–321` sets
`h->m_exstyle |= WS_EX_ACCEPTFILES` from that flag at dialog-creation time. `src/resource.rc:19`
declares `STYLE WS_CHILD` only — no `WS_EX_ACCEPTFILES` — so the bit is off on Linux regardless
of anything `panel_window.cpp` does at runtime. That makes L2-07's real seam `src/resource.rc` +
resgen, the SAME work as L2-06 and §7 bullet 1, not an independent one-liner: a runtime
`SetWindowLong(..., GWL_EXSTYLE, ... | WS_EX_ACCEPTFILES)` would only suppress the
unhandled-drop forward-to-parent — it would not change whether the drop reaches `dlgProc` in
the first place, which already happens via the `ChildWindowFromPoint` descent independent of
the bit. Note also the doc's own conclusion is better-supported than it knew: `src/resource.rc:21–22`
is `BEGIN`/`END` — zero child controls — so the GDK `ChildWindowFromPoint` descent has nowhere
to land but the panel HWND itself. Two supporting details still check out: SWELL's
`DragQueryFile` reads the same `DROPFILES` layout the handler assumes
(`swell-wnd-generic.cpp:7730+`), and SWELL's `DragFinish` is a documented no-op ("caller will
free hdrops", `:7725–7728`) while SWELL itself `GlobalFree`s the handle right after
`SendMessage` (`swell-generic-gdk.cpp:1623–1624`) — so `panel_window.cpp:59` calling
`DragFinish` is safe, not a double-free.
**Severity: Major `[verify — Linux]`** — if the routing does *not* reach a docked child dialog,
one of the three ingest surfaces (file drop onto the bank panel) is silently dead with no error.
The evidence above says it probably works; it is not proof, and it cannot be exercised until
the panel itself renders (T1's resgen wiring — see L2-06).
**Effort:** no independent source-side fix exists — this is the same resgen work already
costed under L2-06 / §7 bullet 1. Do not add an `Effort: S` line here; adding the
`SetWindowLong` call would compile, do nothing observable, and send an implementer looking for
a bug that isn't where they'd look.
**Direction.** No separate fix. Once the resgen work lands the panel dialog with
`WS_EX_ACCEPTFILES` set from the resource, verify: `[verify — Linux]` drop a WAV onto the
docked panel and confirm `WM_DROPFILES` reaches `dlgProc`.
### L2-08 — the VST3 instrument has no Linux editor, and no automatable parameters to fall back to
**Location:** `src/shell/instrument/editor_platform.cpp:37–42` (`isPlatformTypeSupported`
returns `kResultTrue` **only** for `kPlatformTypeHWND`, and only inside `#ifdef _WIN32`);
`:298–306` (the non-Windows stubs); `reasampler_editor.h:156–269` (the entire paint/input family
is `#ifdef _WIN32`); `reasampler_embed.cpp:135–141` (`REAPER_FXEMBED_WM_IS_SUPPORTED` returns 0
off Windows). `reasampler_processor.cpp:360–365` still hands the host a `ReaSamplerEditor`.
**Mechanism.** The VST3 SDK *does* support Linux — `kPlatformTypeX11EmbedWindowID`
(`vendor/vst3sdk/pluginterfaces/gui/iplugview.h:79`), `Linux::IRunLoop` with
`registerEventHandler`/`registerTimer` (`:267–279`), `Linux::IEventHandler` (`:223`),
`Linux::ITimerHandler` (`:239`), and a `linuxmain.cpp` module entry
(`vendor/vst3sdk/public.sdk/source/main/linuxmain.cpp`). The instrument simply does not
implement any of it. The consequence compounds: with `isPlatformTypeSupported` false for every
type, the host falls back to a **generic parameter UI** — and a grep for
`addParameter|parameters\.add|getParameterCount` across `src/shell/instrument/*.cpp` returns
**nothing**. Zero VST3 parameters are registered as of this branch's base. A Linux user would
get an instrument with no editor and no controls whatsoever. (Phase Γ-W4-T1
`vst3-parameter-set` — `docs/product/parameter-automation.md` — is landing the parameter set
concurrently, which materially improves this fallback; the *editor* gap is unaffected.)
The specific Win32 dependencies a Linux editor would have to replace, each verified absent from
SWELL: `RegisterClassW`/`CreateWindowExW`/`DefWindowProcW` (`editor_platform.cpp:79–103,294`) —
SWELL has no window-class model at all, only `SWELL_CreateDialog` and raw `HWND__` construction;
`MoveWindow` (`:133`) — SWELL has `SetWindowPos` (`swell-functions.h:286`) instead;
`GetWindowLongPtr`/`SetWindowLongPtr` (`:74,105,142`) — SWELL has the non-`Ptr` forms returning
`LONG_PTR` (`:319–320`); `TrackMouseEvent`/`WM_MOUSELEAVE` (`:176–198`) — SWELL has neither, a
gap the panel layer already documents at `panel_state.h:245–246`; `GetKeyState`
(`editor_input_waveform.cpp:38`, `editor_input_curve.cpp:50`) — SWELL has only
`GetAsyncKeyState` (`swell-functions.h:712`); `DragAcceptFiles`/`DragQueryFileW`
(`:109,283`); `GetModuleHandle` (`:75`).
**Severity: Major (instrument only)** — the plugin would load and process audio; it would be
unplayable and uneditable.
**Effort: L** — an X11-embed `IPlugView` (`attachedToParent` receiving an X11 window id rather
than an HWND), an `IRunLoop`-driven timer replacing `SetTimer`/`WM_TIMER`, an event-driven
input path replacing the `wndProc` switch, and a LICE surface bound to that window. This is a
new competence, not a port of the existing one.
**Direction.** Treat as a separate, later decision from the extension (see §3). If it is ever
taken, the natural shape is a small platform seam under `shell/instrument/` — `editor_platform`
already *is* that seam; it needs a sibling, not a rewrite.
### L2-09 — the draw kit's font faces do not exist on Linux and substitute silently
**Location:** `src/shell/panel/draw_kit.cpp:70–77` (`loadFont`), and the two literal faces it is
called with — Segoe UI and Consolas, per `draw_kit.h:63–64`.
**Mechanism.** On Linux `CreateFont` goes through fontconfig when built with
`-DSWELL_FONTCONFIG` (gated per the `[verify — Linux]` note in §1.5):
`FcPatternAddString(pat, FC_FAMILY, lfFaceName)` → `FcConfigSubstitute`/`FcDefaultSubstitute` →
`FcFontMatch` (`swell-gdi-lice.cpp:450–487`). Whether `FcFontMatch` itself can return failure is
a claim about fontconfig's own internals — fontconfig is not vendored here, so it is dropped
rather than asserted uncited (this doc's own evidence-discipline rule). What the vendored code
does show: even a successful match doesn't guarantee a loadable face —
`swell-gdi-lice.cpp:480–484` only sets `face` when `FcPatternGetString(hit, FC_FILE, …)`
resolves to a nonempty string AND the following `FT_New_Face` succeeds; either step can fail,
leaving `face` NULL, and in this build path there is no further fallback — the
`MatchFont`/LiberationSans/DejaVuSans list at `:493–539` compiles only in the `#else`
(`#ifndef SWELL_FONTCONFIG`) branch. However `swell-gdi-lice.cpp:400–401,561,564` show
`CreateFont` always allocates and returns a non-null `HGDIOBJ__*` regardless of whether `face`
resolved — the failure is recorded internally (`font->typedata = NULL`), not as a null return —
so `draw_kit.cpp:74`'s own `if (!hf) return` guard does **not** catch this failure mode; `hf`
comes back non-null either way. Whatever degraded outcome exists here comes from
`LICE_CachedFont`'s own handling of a null-`typedata` font (§1.5 already cites real
non-Windows branches in `lice_textnew.cpp:236–249,829,1027–1028,1040`), not from `loadFont`'s
stated guard — `[verify — Linux]`. The two WCAG `static_assert`s (`draw_kit.cpp:53–54`) are on
**pixel height and weight**, not on the face, so they still hold regardless.
**Severity: Minor** `[verify — Linux]` — cosmetic at best; whether it degrades further than
wrong metrics (e.g. to no text at all) rests on the unconfirmed downstream null-face handling
above, not on anything this audit can read statically.
**Effort: S** — confirmed against the actual call sites: five total (`draw_kit.cpp:154–158`,
four using "Segoe UI", one "Consolas"), each a single string-literal argument. A platform
fallback is a `#ifdef`-guarded literal swap at those five sites, not a new mechanism —
`draw_kit.cpp:69`'s comment ("the face is chosen here so a change is one line") describes one
call's literal, not all five; the S estimate rests on there being only five call sites, not on
that comment's wording.
**Direction.** Add a platform fallback face list at the five `loadFont` call sites
(`draw_kit.cpp:154–158`). DejaVu Sans / DejaVu Sans Mono are the safe Linux defaults; SWELL's
own no-fontconfig fallback list names LiberationSans/DejaVuSans and
LiberationMono/DejaVuSansMono (`swell-gdi-lice.cpp:505–507`), a reasonable precedent to copy.
This same change fixes macOS (San Francisco / Menlo), one code path.
### L2-10 — OS drag-out on SWELL loses the copy-only mask, the readiness probe, and the outcome
**Location:** `src/shell/actions/drag_out_win.cpp:249–282` (the `#else` branch);
`drag_out_win.h:7–11,29–33` already states the first and third honestly.
**Mechanism.** Three separate degradations, all real but none fatal. (a) `DoDragDrop`'s
`DROPEFFECT_COPY`-only mask (`:230`) is a **structural** guarantee that no target can MOVE a
bank file out of the folder; `SWELL_InitiateDragDropOfFileList` takes no effect mask
(`swell-functions.h:1011`), so the guarantee reduces to whatever the GDK drag advertises.
(b) `canInitiateDragOut` degrades to `!paths.empty()` (`:276–278`), so the caller's careful
coupling — "do not tear down the internal drag until the OS is known ready"
(`panel_drag.cpp:227–244`) — has nothing to check against. (c) `initiateDragOut` returns `true`
unconditionally (`:270`), so the advisory success return is meaningless. The caller ignores it,
so (c) is inert today. Note the call path is already Linux-correct in one important respect:
`handOffToOs` releases capture and resets drag state (`panel_drag.cpp:240–241`) *before*
invoking the drag, which matters because SWELL's implementation takes capture on its own hidden
window and spins a nested `SWELL_RunMessageLoop` until capture drops
(`swell-generic-gdk.cpp:3575–3584`, inside `SWELL_InitiateDragDropOfFileList` — the function
`drag_out_win.cpp:270` actually calls; the body is identical to the sibling
`SWELL_InitiateDragDrop` at `:3531–3560`, which is where an earlier draft of this citation
pointed) — with a 500 ms no-motion timeout that has no Windows analog.
**Severity: Minor** — the feature works; one safety property becomes conventional rather than
structural.
**Effort: S** — mostly documentation; there is no SWELL surface to restore the mask with.
**Direction.** Leave the implementation; make sure the copy-only invariant's home
(`drag_out_win.h:7–11`) is the doc a Linux reviewer is pointed at, and treat "MOVE is
structurally impossible" as a Windows-only claim in any future spec text.
### L2-11 — `normalizeSlashes` case-folds on `_WIN32` only, which is right for Linux and wrong for macOS
**Location:** `src/core/capture/capture_paths.cpp:18–20`.
**Mechanism.** The one platform conditional in `core/`. Linux filesystems are case-sensitive, so
*not* folding is correct and the existing tests already assert it
(`tests/test_capture_paths.cpp:50–51`). The shared-path note: macOS's default APFS/HFS+ is
case-**insensitive**, so the same `#ifdef _WIN32` under-folds there — a pre-existing macOS
defect this audit surfaces but does not own.
**Severity: Minor** (no Linux defect). **Effort: S** — confirmed: the one platform conditional
in `core/` is a single `#ifdef _WIN32` block (`capture_paths.cpp:18–20`) with no other call
site depending on the token; a predicate swap is a one-block change.
**Direction.** No Linux action. If macOS is ever targeted, the predicate wants to be
"case-insensitive filesystem", not "Windows".
### L2-12 — `fs::path::string()` narrowing is strictly better on Linux (informational)
**Location:** `prune_fs.cpp:118`, `ingest.cpp:222,254`, `capture_paths.cpp:95`,
`panel_bank_ops.cpp:39`, `scope_resolve.cpp:207`, `insert.cpp:71`,
`capture_realtime_shell.cpp:306`, `capture.cpp:408`, `instrument_bake.cpp:166`.
**Mechanism.** On MSVC `std::filesystem::path::string()` narrows through the active code page;
on Linux `path` is already `char`-based, so `.string()` is a byte passthrough and UTF-8 survives.
The one site that deliberately works around the Windows behaviour —
`instrument_drop_win.cpp:123–128`, using `u8string()` — is harmless on Linux (C++17, so
`u8string()` returns `std::string`; `CMakeLists.txt:28` pins `CMAKE_CXX_STANDARD 17`, and under
C++20 the `.c_str()` at `:128` would become a `const char8_t*` type error — worth knowing before
anyone bumps the standard).
**Severity: Minor / informational.** **Effort: none.** **Direction:** no action; do not "fix" it.
---
## Surfaces checked and found clean
Recorded so the sweep's negative results are as auditable as its findings.
- **Missing standard includes** (the MSVC-transitively-provides class). Ran a use-vs-include diff
across all 293 files for `<cstring> <cstdio> <memory> <atomic> <algorithm> <limits> <cmath>
<functional> <ctime> <cstdlib>`. Five raw hits; all five verified false positives on read —
four were the symbol name appearing in a *comment* (`render_settings.h:53`,
`ext_state_read.h:20`, `action_registry.h:7`) or a correct `<cmath>` `std::abs`
(`velocity_curve.cpp:229`, `<cmath>` at `:6`), and `processor_reload.cpp`'s `std::unique_ptr`
comes from `reasampler_processor.h:12`. **No missing include found — but this only covers the
ten headers above.** The two headers most likely to produce the classic
MSVC-transitively-provides failure under libstdc++, `<vector>` and `<string>`, were excluded
from that sweep; re-run including them: **45 files use `std::vector` without `#include
<vector>`, and 52 use `std::string` without `#include <string>`** (raw grep-diff counts,
unread). `<map>` and `<set>` add 2 and 3 more respectively. These 102 raw hits were **not**
individually verified the way the five above were (that would mean reading 102 files); the
claim this sweep actually supports is "up to 102 files may rely on transitive inclusion for
`<vector>`/`<string>`/`<map>`/`<set>`, unconfirmed one by one" — not "no missing include
found." The two header cases that matter most for the extension's own build
(`shell/capture/capture_orchestrator.h`, `src/ext_keys.h`) are confirmed satisfied
transitively.
- **Templates / two-phase lookup.** Exactly 7 templates in the tree
(`core/wire/bytes.h:25,61`, `core/wire/ext_state_read.h:37`,
`core/instrument/engine/play_params.h:191,203,208,218`). None derives from a dependent base,
none calls an unqualified dependent name, none needs `typename`/`template` disambiguation.
GCC/Clang-safe as written.
- **Compiler extensions.** Zero `#pragma` other than `#pragma once`; zero `__declspec`,
`__attribute__`, `__forceinline`, anonymous struct/union, or MSVC-permissive construct in
`src/**`.
- **`HWND__` forward declaration.** `drag_out_win.h:19` declares `struct HWND__;`; SWELL declares
`typedef struct HWND__ *HWND;` (`swell-types.h:211`) — same tag, no `-Wmismatched-tags`.
- **`preview_register_t` platform fork.** `panel_audition.cpp:36–41,58–63` and
`panel_state.h:20–24` match the SDK's own fork exactly (`CRITICAL_SECTION cs` on `_WIN32`,
`pthread_mutex_t mutex` otherwise — `vendor/reaper-sdk/sdk/reaper_plugin.h:1308–1312`).
`<pthread.h>` is included on the non-Windows branch. Correct.
- **Prompts and message boxes.** Every user prompt goes through REAPER's own
`GetUserInputs`/`ShowMessageBox`/`ShowConsoleMsg` (`panel_bank_ops.cpp:24–25,81,100,126,381`),
never a Win32 `MessageBox`. Cross-platform by construction.
- **Menus.** `CreatePopupMenu`/`InsertMenu`/`TrackPopupMenu(TPM_RETURNCMD)`/`DestroyMenu` are all
SWELL-provided (`swell-functions.h:528–532`, and `TrackPopupMenu`/`DestroyMenu`/
`CreatePopupMenu` entries); the "pos < 0 appends" assumption at `panel_bank_ops.cpp:226` matches
SWELL's `SWELL_InsertMenu`. The comment at `:220–222` is accurate.
- **Keyboard/accelerator path.** `accelerator_register_t` + `MSG`/`WM_KEYDOWN` + `GetFocus` +
`GetParent` (`panel_input.cpp:503–521`) are all SWELL-provided; every `VK_*` used is in
`swell-types.h`.
- **Double-buffered paint.** `LICE_SysBitmap` + `getDC()` + `BitBlt(SRCCOPY)`
(`panel_render.cpp:474,549`) — `LICE_SysBitmap` has real non-Windows paths
(`lice.cpp:179`, `lice.h:362`), `BitBlt`/`SRCCOPY` are SWELL-provided.
- **Byte order.** Handled explicitly everywhere it matters (see §1.1). No native-integer
`memcpy` onto a wire buffer anywhere in `core/wire`.
- **Hot-path guardrails.** Nothing in this audit's remediation directions touches
`peaks::computeEnvelope` (still a free function), the audition call-through
(`panel_audition.cpp` — direct calls, no interface), or the realtime tick's single-pointer-test
idle path (`main.cpp:156`). L2-04's number-codec change is on the JSON/persist path, which root
`CLAUDE.md` explicitly declares off all hot paths. **No recommendation here adds a hot-path
indirection.**
---
## 3. Extension vs. instrument — the cost split
The two artifacts are cleanly separable, and the evidence says the split is very lopsided.
### 3.1 Extension only (`reaper_reasampler`)
**What must change in source:** two compile Blockers (L2-01, L2-02 — both one-line), one load
hazard (L2-03), one silent-failure diagnostic (L2-06), one correctness/safety fix (L2-05), one
data-integrity fix (L2-04), and cosmetics (L2-09). Nothing here is architectural. The panel's
whole SWELL/LICE surface — dialog lifecycle, docking, `WM_PAINT` double-buffered LICE draw,
mouse/wheel/capture, cursors, menus, keyboard accelerator, modifier keys, tooltips, drag-out,
drop-in — was checked call-by-call against the vendor headers and is **already SWELL-portable**;
see §1.5 and "Surfaces checked". This is the single most load-bearing finding of the audit: the
panel was written against SWELL's vocabulary throughout, and the Windows-only escapes are three
small ones (`DragAcceptFiles`, `SHFileOperationW`, OLE `DoDragDrop`) that each already carry a
non-Windows branch or a documented reason they do not.
**Estimate shape:** S+S+S+S+M+M+S. No L item.
### 3.2 Instrument additionally (`reasampler_vst`)
**What must be written from nothing:** an X11-embed `IPlugView` (window creation and parenting
without `RegisterClass`/`CreateWindowEx`), an `IRunLoop`/`ITimerHandler`-driven replacement for
the `SetTimer`/`WM_TIMER` sync poll, an event-driven input path replacing the entire `wndProc`
switch (~150 lines of `editor_platform.cpp:139–296`), hover-leave detection without
`TrackMouseEvent`, modifier reads via `GetAsyncKeyState` instead of `GetKeyState`, and drop-accept
without `DragAcceptFiles`. The paint side is the cheapest part — every painter already draws into
a `LICE_IBitmap` through the shared kit (`editor_paint.cpp:28,51`), so the drawing survives a
window-system change intact; it is the *window and event plumbing* that is entirely absent. The
TCP/MCP embed strip (`reasampler_embed.cpp:135–141`) is a smaller, separate 0→1
(`REAPER_FXEMBED_WM_IS_SUPPORTED` currently returns 0 off Windows; the paint body at `:174+` is
LICE and would port).
**Estimate shape:** one L, and it is a genuinely new competence rather than a port.
### 3.3 The consequence for sequencing
The extension is a Linux target that is largely *already met* and needs a handful of small,
well-localized fixes. The instrument is a separate project. The two share exactly one file —
`shell/panel/draw_kit` — and that file's only Linux blocker is L2-01. Daniel rules on whether the
instrument is in scope at all; the evidence says the extension does not wait on it.
---
## 4. Feature-degradation list — what builds but behaves differently, or not at all
Blunt column: **GONE** = the capability does not exist on Linux; **DIFFERENT** = it exists with
changed behaviour; **AT RISK** = depends on an unverified assumption.
| Feature | Verdict | What actually happens | Cite |
|---|---|---|---|
| Prune → Recycle Bin | **GONE** | Hard `unlink`, unrecoverable | `prune_fs.cpp:200–208` |
| Prune's "file is locked" skip | **GONE** | `unlink` on an in-use file succeeds; the skip branch is dead code | `prune_fs.cpp:205` |
| Docked bank panel | **GONE (today)** | `SWELL_CreateDialog` returns null; toggle is a silent no-op until the resgen source is added (§7) | `panel_window.cpp:135–137` |
| VST3 editor | **GONE** | `isPlatformTypeSupported` false for every type; host shows a generic UI | `editor_platform.cpp:37–42` |
| VST3 generic-UI fallback | **GONE (today)** | Zero parameters registered as of this base; Phase Γ-W4-T1 changes this | grep `addParameter` over `shell/instrument/*.cpp` → no hits |
| TCP/MCP embed strip | **GONE** | `REAPER_FXEMBED_WM_IS_SUPPORTED` returns 0 | `reasampler_embed.cpp:135–141` |
| Kit fonts (Segoe UI / Consolas) | **DIFFERENT** | fontconfig substitutes silently; metrics and ellipsis points shift; ValueMono may lose tabular alignment | `swell-gdi-lice.cpp:450–487` |
| OS drag-out copy-only guarantee | **DIFFERENT** | No effect mask; copy-only is conventional not structural | `drag_out_win.cpp:257–270` |
| OS drag-out readiness/outcome | **DIFFERENT** | Probe degrades to "non-empty"; return is always `true`; 500 ms no-motion timeout has no Windows analog | `drag_out_win.cpp:276–278`, `swell-generic-gdk.cpp:3579–3580` |
| Panel file-drop ingest | **AT RISK** | Depends on SWELL delivering `WM_DROPFILES` without the Win32 opt-in | `panel_window.cpp:145–150` |
| Bank index float round-trip | **AT RISK** | Unparseable under a non-C `LC_NUMERIC` | `json.cpp:39–43,190–196` |
| Extension load | **AT RISK** | Any one unresolved API name in ~869 = silent refusal | `main.cpp:292–293` |
| Path case sensitivity | **DIFFERENT (correct)** | No case-fold; correct for Linux, and the tests already assert it | `capture_paths.cpp:18–20` |
| Prune reclaim on a symlinked bank file | **AT RISK** | `fs::directory_iterator` + `is_regular_file()` follows symlinks (C++17); size is read from the target via `file_size()` but `fs::remove` deletes the link, not the target — prune reports N bytes reclaimed and reclaims zero. Symlinked media folders are far more idiomatic on Linux than Windows. | `prune_fs.cpp:113–124` |
| Audition / preview | **INTACT** | `preview_register_t` fork matches the SDK; `PlayPreview`/`StopPreview` are REAPER API | `panel_audition.cpp:36–63` |
| Docking, menus, cursors, keyboard, wheel, capture rollback, tooltips | **INTACT** | All SWELL-provided; verified call-by-call | §1.5 |
| Capture pillar (offline + realtime), persist, tracking, prune *computation* | **INTACT** | Pure `core/` + REAPER API only | §1.1 |
---
## 5. Open questions
### `[verify — Linux]` — answerable only on a Linux box
1. **Process locale.** Read `setlocale(LC_NUMERIC, nullptr)` inside a running REAPER-Linux
process (print via `ShowConsoleMsg`) on a machine whose user locale uses a decimal comma.
Decides whether L2-04 is urgent or latent.
2. **REAPER API completeness.** Instrument `main.cpp:292` to print
`REAPERAPI_LoadAPI`'s return value instead of discarding it, load once, and record the count.
Non-zero decides whether L2-03 is a real Blocker and names the gap.
3. **Panel file-drop routing.** With the panel docked, drag a WAV from the file manager onto it
and observe whether `dlgProc` sees `WM_DROPFILES` (L2-07). If not, add `WS_EX_ACCEPTFILES`.
4. **Which SWELL GDI/locale build REAPER ships.** Whether REAPER's `libSwell.so` is built with
`SWELL_SUPPORT_GTK` (→ `gtk_init_check`, `swell-generic-gdk.cpp:366`) or without
(→ `gdk_init_check`, `:368`) changes the likelihood in (1). Observable indirectly via (1).
5. **fontconfig substitution for "Consolas".** Whether it lands on a monospaced face on a stock
distro decides whether L2-09 is cosmetic or a real readability regression on numeric readouts.
6. **`SWELL_InitiateDragDropOfFileList` acceptance semantics.** Whether a GDK-initiated file drag
is accepted as a copy by common targets (a file manager, another DAW), and whether the 500 ms
no-motion timeout (`swell-generic-gdk.cpp:3579–3580`) cancels a slow user gesture.
7. **Prune against an in-use file.** Play an item from a bank file, prune it, confirm the audio
survives until the fd closes and the file is then unrecoverable — the concrete demonstration
behind L2-05(b).
### `[Daniel]` — scope decisions, not knowledge gaps
1. **Is the VST3 instrument in scope for Linux at all?** §3 supplies the cost split; the
extension does not depend on the answer. This is the phase's one real fork.
2. **Is a hard `unlink` an acceptable prune on Linux**, with a platform-aware confirmation
string — or must XDG trash be implemented before Linux ships? (L2-05.)
3. **Is silent font substitution acceptable**, or does the kit get an explicit Linux face list?
(L2-09.)
4. **Does "copy-only is structural" survive as a shipped invariant** when one platform can only
offer it conventionally? (L2-10.)
---
## 6. Ordering sketch
Dependency order only — this is not a plan, and it assigns no waves.
1. **Make it compile.** L2-01 (`FF_DONTCARE`), L2-02 (`GetCurrentProcessId`). Nothing else can
be observed until these land; both are one-line and independent of each other.
2. **Make it load, visibly.** L2-03 (`REAPERAPI_LoadAPI` diagnostic or `REAPERAPI_MINIMAL`) —
must precede any runtime verification, because it is the failure mode that produces no
evidence. Pairs naturally with `[verify — Linux]` (2).
3. **Make the panel appear.** L2-06 (the missing-dialog diagnostic) alongside T1's resgen wiring.
The diagnostic should land first so the resgen step can be confirmed rather than assumed.
4. **Then, and only then, verify.** `[verify — Linux]` items 1, 3, 5, 6, 7 all need a running
panel. Item 2 is already answered by step 2. **The critical path for this step runs through
the parallel build-system track, not this one:** "a running panel" means T1's resgen wiring
(§7 bullet 1) has landed — this doc doesn't own that work and doesn't know its schedule, so
step 3's "alongside T1's resgen wiring" is doing real scheduling work, not just sequencing
flavor. Anyone driving this ordering sketch needs to coordinate with T1 before step 4 can
start, not just after step 3 finishes on this track's own items.
5. **Data integrity.** L2-04 (locale-independent number codec) — pure `core/` work, unit-testable
on Windows, and it should land before any Linux user saves a project. Sequenced after the
verify only so its urgency is known; the *work* is not blocked.
6. **Deletion safety.** L2-05 (XDG trash or a platform-aware confirm) — gated on `[Daniel]` (2).
7. **Ingest opt-in, if needed.** L2-07 — no independent fix; it is the resgen work already
sequenced in step 3, strictly gated on `[verify — Linux]` (3) to confirm it's needed at all.
8. **Cosmetics.** L2-09 (fonts), L2-10 (drag-out doc). Independent of everything above.
9. **Separately, if ruled in.** L2-08 — the instrument's X11 editor. No dependency in either
direction on 1–8 except L2-01, which the shared `draw_kit` needs regardless.
---
## 7. Referred to T1 (build-system; spotted, not analyzed)
- **SWELL dialog resgen is not wired for Linux.** `src/app/CMakeLists.txt:97` — the
`target_sources(... resource.rc_mac_dlg.h)` line is commented out in the Linux `else()` branch
(and in the `APPLE` branch, `:86`). This is the mechanical cause of L2-06.
- **VST3 target is `if(WIN32 …)`-gated.** `src/shell/instrument/CMakeLists.txt:9` — the target is
not configured at all off Windows; `dllmain.cpp` is hard-coded at `:78` where Linux needs
`linuxmain.cpp` (`vendor/vst3sdk/public.sdk/source/main/linuxmain.cpp` exists).
- **`SHCreateStdEnumFmtEtc` / `SHFileOperationW` / `OleInitialize` need shell32/ole32.** Only on
the Windows branch, but worth confirming the Linux branch links none of them.
- **`reaper_plugin.h`'s relative SWELL include.** `vendor/reaper-sdk/sdk/reaper_plugin.h:49`
does `#include "../WDL/swell/swell.h"`, which does not exist under `vendor/reaper-sdk/`. It
resolves only because `${WDL_INC}` is `vendor/WDL/WDL` and `vendor/WDL/WDL/../WDL/swell/swell.h`
is the same file. Works, but it is a coincidence worth knowing before anyone moves an include
path.
- **`<filesystem>` link requirement.** GCC < 9 needs `-lstdc++fs`; `core/` and `shell/` both use
`std::filesystem` heavily.
- **LICE TU set.** `CMakeLists.txt:79–82` adds `lice.cpp`, `lice_line.cpp`, `lice_arc.cpp`,
`lice_textnew.cpp` unconditionally. All four have non-Windows paths, but the Linux link needs
them compiled against `SWELL_PROVIDED_BY_APP` consistently with the module.
---
## Summary table
| ID | Finding | Severity | Effort | Artifact |
|-------|-----------------------------------------------------------------|----------|--------|--------------|
| L2-01 | `FF_DONTCARE` undefined off Windows (`draw_kit.cpp:73`) | Blocker | S | both |
| L2-02 | `GetCurrentProcessId()` unguarded, absent from SWELL | Blocker | S | extension |
| L2-03 | `REAPERAPI_LoadAPI` all-or-nothing over ~869 names, silent | Blocker `[verify]` | S | extension |
| L2-04 | Persisted floats are `LC_NUMERIC`-dependent, both directions | Major | M | both |
| L2-05 | Prune loses trash AND the locked-file backstop | Major | M | extension |
| L2-06 | Panel dialog never created; silent no-op | Major | S | extension |
| L2-07 | No drop-accept opt-in on SWELL; real seam is resgen, same as L2-06 | Major `[verify]` | — (see L2-06) | extension |
| L2-08 | No Linux VST3 editor; no parameters to fall back to | Major | L | instrument |
| L2-09 | Segoe UI / Consolas substitute silently via fontconfig | Minor | S | both |
| L2-10 | SWELL drag-out: no copy mask, no probe, no outcome | Minor | S | extension |
| L2-11 | Case-fold is `_WIN32`-only (right for Linux, wrong for macOS) | Minor | S | both |
| L2-12 | `fs::path::string()` narrowing — Linux is strictly better | Informational | — | both |
docs/product/audit-notes/q-w0-t1-dsp.md
+279
View File
@@ -0,0 +1,279 @@
# Q-W0 Track 1 — DSP / audio algorithm-quality audit (findings)
Static analysis only; no code changed. Surfaces per the track brief: `src/vst/pitch_shift.{h,cpp}`
(highest priority — GA correlation-aligned SOLA rewrite + GA2 prime + GA3 freeze, never audited),
`src/vst/sampler_core.{h,cpp}`, `src/peaks.*`, `src/wav_trim.*`, the capture/tail paths
(`src/capture.cpp`, `src/capture_realtime.cpp`, `src/realtime_record.h`), `src/vst/master_gain.*`,
`src/vst/velocity_curve.*`.
Dispositions follow Q-11 (SETTLED): default document-and-defer; a bounded SOLA fix is weighed
before any technique replacement; technique replacement is Daniel's decision at triage. Note on
"assigned wave": **no structural wave Q-W1..Q-W6 opens the `src/vst/` DSP files** (they target
`core/json`, `bank_panel`, `main`, `actions`, `persist`, registration tables) — so any DSP finding
triaged fix-now is remediated in Q-W0 itself or folded in as a new point before Q-W1 begins.
I cannot listen; every artifact below is stated as mechanism + predicted audible consequence.
Perceptual materiality is Daniel's call.
---
## Overall verdict on the pitch engine (Q-11 framing)
The correlation-aligned SOLA in `pitch_shift` is **not a reinvented wheel in the pejorative
sense** — single-tap SOLA with normalized cross-correlation splice alignment, parabolic sub-sample
peak refinement, and amplitude-complementary raised-cosine fades *is* an established time-domain
technique family (SOLA/TD-PSOLA lineage), and the implementation is unusually well-defended:
normalized (not raw) correlation, ratio-scaled fade lengths with a drain-headroom derivation,
prime-with-real-content onset, frozen-writer tail, filled-span clamping, and double-before-int64
clamps at the overflow-prone spots. The RT discipline holds throughout: `process()` does no
allocation, no locks; the splice burst is bounded and fires once per splice cadence, not per frame.
**No technique replacement (phase-vocoder / WSOLA) is warranted on this evidence.** The findings
below are bounded-fix candidates and documented limits within the existing approach, exactly the
Q-11 escalation ladder's first rung.
---
## Findings
### T1-01 — Stereo Preserve: per-channel independent splice alignment decorrelates L/R
- **Location:** `src/vst/sampler_core.cpp` `Voice::advanceFrame` (Preserve branch, ~577–589) +
`src/vst/pitch_shift.cpp` `PitchShifter::splice`.
- **Mechanism:** a stereo Preserve voice owns two `PitchShifter`s, each running its **own**
correlation search on its own channel's PCM. `bestLag + frac` differ per channel at every splice,
so after the first splice the two read taps sit at different ring positions — an inter-channel
time offset of up to ±`maxLag` (= window/4 ≈ **12.5 ms** at the 50 ms window), re-drawn at every
splice (cadence ≈ window/|ratio−1| frames). The splice *schedules* also diverge (delay drift
depends on tap position), so L and R fade at different times.
- **Predicted artifact:** on genuinely stereo captures played through Preserve off-root: stereo
image wander / widening that changes at the splice cadence, and comb-filter coloration on any
mono sum. Correlated stereo content (the common case for a captured bus) is the worst case.
Dual-mono (mono sample in stereo bus) is unaffected — the code correctly mirrors one shifter.
- **Severity:** **High** (Preserve is the product-default pitch engine and the output bus is
permanently stereo with channel mode auto-defaulting from the capture — this hits the flagship
path on stereo material).
- **Disposition proposal:** this is the strongest candidate for a **bounded SOLA fix** (Q-11 rung
1): link the channels — run the correlation search once (on the L+R mid signal, or on L as
master) and apply the same `bestLag + frac` and splice schedule to both channels. Standard
practice for stereo SOLA. It reshapes the `PitchShifter` seam slightly (splice decision must be
computable once and applied to two rings — e.g. a lag-provider hook or a two-channel shifter),
but no technique change and no new dependency. Recommend **fix-now in Q-W0** pending Daniel's
triage call; if deferred, record it as the known stereo-Preserve limitation.
### T1-02 — Ratio slew mid-fade can drain the outgoing tap past the writer
- **Location:** `src/vst/pitch_shift.cpp` `splice()` fade-length cap (~301–311) + `process()` tap
advance (~360–366).
- **Mechanism:** `fadeLen_` is capped from the drain headroom **at splice time** using the
then-current `ratio_`. The pitch envelope legitimately slews the ratio per frame
(`setShiftRatio` mid-fade). A ratio that **rises** after the splice (pitch-env attack toward a
positive peak, or attack from a negative dip back to base) drains tap B faster than the cap
assumed; the code comment claims the 2-frame margin covers "any realistic per-frame bias", but
the margin is absolute, not slew-proportional: e.g. a splice at ratio ≈ 1 sets
`fadeLen_ = window/4` with no cap (drainRate ≈ 0), and a pitch-env attack ramping to +24 st
(ratio 4) within those ~12 ms drains tap B ≈ 3·window/4 — far past the `dLow` ≈ window/4
headroom. Tap B laps the parked/advancing writer and reads ring-length-stale content at up to
~half fade gain.
- **Predicted artifact:** a periodic click/garble burst at the splice cadence during fast upward
pitch-envelope ramps on Preserve voices. Only reachable with the AD pitch envelope enabled and
steep; base transpositions (constant ratio) are correctly covered by the existing cap.
- **Severity:** Med.
- **Disposition proposal:** document-and-defer (needs pitch-env + Preserve + steep attack to
trigger), with a cheap bounded fix noted for whenever the file is opened: re-tighten `fadeLen_`
when the ratio increases mid-fade (the `freezeTail()` re-anchor block is the exact pattern to
reuse), or clamp tap B's delay to ≥ 2 during a fade.
### T1-03 — Preserve prime ignores the Trigger play-end bound (short-span rings hold cut content)
- **Location:** `src/vst/sampler_core.cpp` `Voice::start` prime block (~375–400) vs. the GA3
`feedBound` in `advanceFrame` (~568–572).
- **Mechanism:** the per-frame feed treats `playEnd_` (Trigger) / `frameCount` as source
exhaustion and freezes the writer so "no padding ever enters the ring" (GA3). But `start()`
primes a **full window** from `pcm[q]` bounded only by `frameCount` — not by `playEnd_` — and
pads with zeros past the sample end while declaring the whole window `filled_`. Two
consequences for spans shorter than the 50 ms window: (a) a Trigger zone's ring holds real PCM
**past the user's chosen stop**, which an up-shifted tap can reach and play (transposed) before
`readPos_ ≥ playEnd_` frees the voice; (b) a sample shorter than the window gets zero padding
inside the ring as declared-valid history, so splices can land in silence — a bounded re-entry
of exactly the burst/gap onset artifact GA2/GA3 eliminated, scoped to sub-50 ms material (short
drum one-shots are realistic content).
- **Severity:** Med (bounded to short spans / short samples in Preserve; inaudible for spans ≥ one
window).
- **Disposition proposal:** bounded fix candidate — prime `min(window, span-to-feedBound)` frames
and call `freezeTail()` immediately after prime when the span is shorter than a window (the GA3
machinery then recycles the real short tail, which is its designed behavior). Small and
contained in `Voice::start`. Recommend fix-now in Q-W0 if Daniel agrees the short-one-shot case
matters; else document-and-defer with this note as the record.
### T1-04 — No sustain-loop crossfade (hard loop seam)
- **Location:** `src/vst/sampler_core.cpp` `Voice::advanceFrame` loop wrap (~493–498, 610–612).
- **Mechanism:** the sustain loop wraps by subtracting the loop length (phase-preserving) and the
interpolation partner wraps `i1 → loop.start`, giving one-sample continuity only. There is no
crossfade region: unless the user's loop points sit at amplitude/slope-matched positions, every
loop pass produces a step discontinuity — a click at the loop rate. `waveform_view`'s
zero-crossing snap on the loop markers mitigates but does not remove it (zero crossings with
mismatched slopes still click). Established samplers crossfade the loop seam (equal-power over a
user- or fixed-length region).
- **Severity:** Med (musically prominent when it hits, fully user-avoidable with careful loop
placement).
- **Disposition proposal:** document-and-defer — a loop-crossfade is a *feature* (needs a
crossfade-length parameter and UI surface), not a bug fix; wrong scope for a reorg phase. Record
as a known limitation beside the zone-loop spec.
### T1-05 — Linear interpolation + no band-limiting on repitch (both engines)
- **Location:** `src/vst/sampler_core.cpp` Varispeed read (~607–624); `src/vst/pitch_shift.cpp`
`readTap` (~172–185).
- **Mechanism:** all fractional reads are first-order (linear). Linear interpolation's frequency
response rolls off highs and leaks imaging sidebands (the interpolation image spectrum is
attenuated only ~12 dB/oct); Varispeed up-shifts additionally alias (reading faster than 1× with
no pre-filter folds source content above the post-shift Nyquist back into band). This is classic
hardware-sampler behavior — often accepted, sometimes desired — and both engines share it
consistently.
- **Severity:** Low (quality ceiling, not a defect; deterministic and stable).
- **Disposition proposal:** document-and-defer as a recorded trade-off. If a quality bump is ever
wanted, a 4-point cubic Hermite read is a drop-in bounded upgrade at both call sites (no
structural change); band-limited varispeed is a much bigger lift and not recommended.
### T1-06 — Correlation search: coarse step 4 can mis-lock on very high fundamentals; maxLag bounds alignment to ≥ ~80 Hz
- **Location:** `src/vst/pitch_shift.cpp` `splice()` search loops (~240–257) and `configure()`
geometry (~68–72).
- **Mechanism:** two documented-by-construction limits. (a) The coarse search samples the
correlation every 4 lags and refines ±3 around the coarse best — full integer coverage only
*near* the coarse winner. For content whose correlation oscillates with period < ~8 samples
(fundamentals above ~5.5 kHz at 44.1k), the coarse grid can alias and lock a non-optimal region;
the splice then lands up to half a period misaligned. (b) `maxLag = window/4` (~12.5 ms) cannot
span a full period below ~80 Hz, so deep-bass fundamentals cannot be period-aligned and splices
degrade toward unaligned OLA there. Both are inherent range/cost trades every SOLA makes; the
in-code comment already states (b).
- **Severity:** Low (edge content: pure tones > 5 kHz, fundamentals < 80 Hz).
- **Disposition proposal:** document-and-defer; record both bounds as the engine's stated
operating range. No change recommended — widening either costs splice-burst CPU linearly.
### T1-07 — `splice()` up-jump clamp comment contradicts the code (margin direction)
- **Location:** `src/vst/pitch_shift.cpp` ~196–210.
- **Mechanism:** the comment derives the "tight cap" as `filled_ - d - maxLag_ - 2`, then says the
code's `- 1` is "one sample of conservative margin" — but `-1` permits a *larger* jump than
`-2`, i.e. the code is *less* restrictive than the comment's own derivation; the sentence has
the direction backwards. Re-deriving: the deepest probe is the parabola's outer lag at
`d + jump + maxLag + 1` (the interpolator's `i1 = i0 + 1` read-ahead moves *younger*, not
deeper), so the code's `-1` is exactly tight and the comment's `-2` double-counts the
interpolator. No out-of-range read either way; the comment is wrong, not the code.
- **Severity:** Low (doc-only; misleads the next maintainer of a safety-critical clamp).
- **Disposition proposal:** fix-now (comment rewrite, zero behavior change) — fold into whichever
Q-W0 remediation touches `pitch_shift`; if none does, a standalone one-line doc fix in Q-W0.
### T1-08 — Linear-in-amplitude ADSR decay/release segments
- **Location:** `src/vst/sampler_core.cpp` `AdsrEnvelope::tick` (~131–170).
- **Mechanism:** decay and release ramp linearly in amplitude. Constant-slope amplitude is
constant-dB-rate nowhere: a long release spends most of its wall-clock at perceptually loud
levels then collapses abruptly (in dB terms the curve is logarithmic-late). Classic samplers use
exponential (constant-ratio) segments for decay/release. The evaluator itself is correct and
well-tested (release-from-current-level, hold-0 byte-compat re-dispatch are both right).
- **Severity:** Low (character, not correctness; the perceptual judgment is Daniel's).
- **Disposition proposal:** document-and-defer. An exponential-segment option is a contained
evaluator change but alters every existing instrument's envelope feel — a product decision, not
a Q-W0 cleanup.
### T1-09 — Takeover-declick: `declickR_` is dead state
- **Location:** `src/vst/sampler_core.cpp` (~598–599, 639–646, 515–518).
- **Mechanism:** both channels deliberately share one blend weight (`declickL_` — commented), but
`declickR_` is still seeded and decayed every frame and never read for output. Dead state that
invites a future L/R-weight divergence bug. The blend itself audits **clean**: `out' =
(1−w)·out + w·ref` is a convex combination for w ∈ [0,1], so `|out'| ≤ max(|out|,|ref|)` — the
rev-2 boundedness claim is mathematically sound, the boundary-frame identity holds, and the
ring-out path on voice end is handled (the peer-path symmetry is present).
- **Severity:** Low (hygiene; no audio effect).
- **Disposition proposal:** fix-now-trivial (delete the field or rename the shared weight) — fold
into any Q-W0 edit of `sampler_core`; not worth its own change otherwise.
### T1-10 — `planWavTruncate` silently drops chunks located after `data`
- **Location:** `src/wav_trim.cpp` `planWavTruncate` (~151), `capture_realtime.cpp`
`trimAutoTailInPlace`.
- **Mechanism:** the plan truncates the file at `dataByteOffset + keptDataBytes`. Any RIFF chunk
REAPER wrote *after* the data chunk (bext/iXML/smpl orderings vary by writer) is discarded; the
RIFF size is patched consistently so the result is a valid WAV, but metadata is lost without a
trace. The PCM and the trim boundary math themselves audit clean (file-rate-authoritative frame
math, scan confined to the tail region, -72 dB threshold single-sourced from
`kAutoTrimThresholdDb`, one-frame-past-last-audible per spec, no-trim fallbacks total).
- **Severity:** Low (metadata only; audio unaffected; trim is a convenience path).
- **Disposition proposal:** document-and-defer — note the behavior in the header's FORMAT
ASSUMPTION block when the file is next touched. Preserving trailing chunks would complicate the
single-truncating-write design for no audio benefit.
### T1-11 — `makeUniqueTag` has one-second resolution (collision window)
- **Location:** `src/capture.cpp` (~224–227) and `src/capture_realtime.cpp` (~120–123).
- **Mechanism:** the uniqueness tag is `std::time(nullptr)` — 1 s resolution. Two captures of the
same `baseName` within the same wall-clock second derive the same file stem: the offline path
would overwrite the first render's file and mint two Samples with colliding ids. Reachable in
practice via `batch_capture` driving several short renders back-to-back. The realtime path
can't self-collide (transport exclusivity) but shares the pattern. DSP-adjacent rather than
DSP; recorded here because the capture paths are this track's surface — Track 2 may claim it.
- **Severity:** Low-Med (silent data loss on collision; narrow window).
- **Disposition proposal:** fix-now candidate, trivial: append a per-session monotonic counter to
the tag (both call sites). Belongs wherever Track 2/triage routes capture-path hygiene; Q-W3
(main/orchestration split) is the nearest wave that opens the extension capture flow, else Q-W0.
---
## Surfaces that came back clean
- **`src/peaks.*` — clean.** The bin partition `[b·frames/binCount, (b+1)·frames/binCount)` is
exact integer math, remainder-distributing, no dropped tail; overflow guarded; short-buffer
clamped; per-channel with no fold (invariant honored). `columnMinMax` mirrors the partition with
64-bit products and the enclosing-bin fallback. `lastFrameAboveThreshold` scans backward with a
correct strictly-greater test and no wrap hazard.
- **`src/wav_trim.*` — clean** except T1-10 (metadata note). Chunk walk is bounds-checked and
total; even-byte padding honored; extensible-format float discrimination via the SubFormat GUID
leading tag is correct; LE reads via `memcpy` (no aliasing UB); truncate plan never grows.
- **`src/capture.cpp` (offline) — clean** from the algorithm-quality lens except T1-11. Exact
unrounded bounds, dither forced off (bit-identical repeats), float32-only with ground-truth
format blob, surgical trim-end normalize only in Auto, full snapshot/restore RAII. The
precision-invariant plumbing is disciplined.
- **`src/capture_realtime.cpp` + `src/realtime_record.h` — clean** except T1-11 (shared) and the
already-in-code DAW-verify flags (take/frame-0 alignment assumption for the trim; abort()'s
best-effort finalize racing the flush — both explicitly documented in place, correctly scoped).
The record state machine's decisions are pure and ceiling-bounded; the trim is best-effort and
never eats the range body.
- **`src/vst/master_gain.*` — clean.** Taper endpoints single-sourced; norm-0 true-zero detent
with the finite −60 dB floor; unity at ≈ 0.714 as documented; inverse collapses sub-floor values
to the detent (documented); non-finite input clamped. The dB↔linear math is correct.
- **`src/vst/velocity_curve.*` — clean.** The Fritsch–Carlson tangent is the standard
weighted-harmonic-mean form (w₁ = 2h₂ + h₁, w₂ = h₂ + 2h₁), which bounds m ≤ 3·min(d₁,d₂) —
monotonicity and no-overshoot inside [0,1] hold as claimed; sign-change/flat neighbors pin to 0;
zero-span steps and coincident-X knots are handled; deserialize repairs the invariant
defensively. `eval` once per note-on keeps it off the per-frame path.
- **`sampler_core` voice/steal/mono machinery — clean** (beyond the findings above): the steal
policy is deterministic and as documented; the mono held-stack has correct range guards against
uint8 aliasing, order-preserving removal, per-note velocity for retrigger fallback, and CC 123
as its only reset path; `soundingNote()` correctly excludes ring-out tails from the Preserve cap
and legato predicates; the two-tier panic semantics are right; both render overloads share one
summation discipline with no allocation; envelope/keymap resolution honors the rate-free-seconds
invariant (frames resolved at keymap build against the live rate — the prior frame-domain
incident is not repeated here). The per-frame `std::pow` when the pitch envelope is active is
bounded and acceptable.
- **`pitch_shift` core machinery — clean** (beyond the findings above): the safe-band geometry,
filled-span clamps, normalized correlation, parabolic sub-sample refinement, complementary
raised-cosine fade (correct for phase-aligned content; the −6 dB midpoint on uncorrelated
content is a documented, benign trade), `freezeTail`'s fade re-anchor continuity, and the
down-shift ring-lap margin all audit sound. Down-shift writer-lap is unreachable for any ratio
above ≈ −109 st; up-shift fade drain is covered to +24 st and beyond by the ratio-scaled cap
(T1-02 is the slew case only).
---
## Summary table
| ID | Surface | Finding | Severity | Disposition proposal |
|-------|----------------------------------|------------------------------------------------------------|----------|---------------------------------------------------|
| T1-01 | pitch_shift + sampler_core | Stereo Preserve: independent L/R splice alignment | High | Bounded SOLA fix (linked lag) — recommend fix-now in Q-W0; Daniel's call |
| T1-02 | pitch_shift | Ratio slew mid-fade can lap the outgoing tap | Med | Document-and-defer; bounded re-cap noted |
| T1-03 | sampler_core (Preserve prime) | Prime ignores Trigger playEnd / pads short samples | Med | Bounded fix candidate in Q-W0; else defer w/ note |
| T1-04 | sampler_core (loop) | No sustain-loop crossfade (hard seam) | Med | Document-and-defer (feature, not reorg scope) |
| T1-05 | sampler_core + pitch_shift | Linear interp, no band-limiting on repitch | Low | Document-and-defer (recorded trade-off) |
| T1-06 | pitch_shift | Coarse-search HF mis-lock; ≥ ~80 Hz alignment bound | Low | Document-and-defer (stated operating range) |
| T1-07 | pitch_shift | maxJump clamp comment contradicts code | Low | Fix-now (comment-only), in Q-W0 |
| T1-08 | sampler_core (ADSR) | Linear-amplitude decay/release segments | Low | Document-and-defer (product decision) |
| T1-09 | sampler_core (declick) | `declickR_` dead state | Low | Fix-now-trivial, fold into any Q-W0 edit |
| T1-10 | wav_trim | Truncate drops post-`data` chunks (metadata) | Low | Document-and-defer (header note) |
| T1-11 | capture.cpp + capture_realtime | 1 s-resolution unique tag → batch collision window | Low-Med | Fix-now candidate (monotonic counter); route at triage |
Clean surfaces: `peaks`, `master_gain`, `velocity_curve` (fully); `wav_trim`, offline + realtime
capture paths, and the non-flagged machinery of `sampler_core` / `pitch_shift` (clean with the
noted exceptions above).
docs/product/audit-notes/q-w0-t2-architecture.md
+334
View File
@@ -0,0 +1,334 @@
# Q-W0 Track 2 — architecture-smell audit (functional lens)
Static analysis of the whole `src/` tree (extension + `src/vst/`), 2026-07-28, branch
`pq-w0-audit`. Complement to the grep-verified SOLID audit (§2) and naming audit (§2b) in
`docs/product/code-organization.md` — this track reports the **functional** smells those did not
target: duplicated *algorithms* (not merely duplicated responsibilities), reinvented wheels,
poor abstractions, and leaky pure/shell boundaries. Findings already catalogued there (the four
god-modules, the 4× JSON `Parser`, fat headers, `promptText`/`mintBankId` duplication, namespace
flatness, naming families) are **not restated**; where a finding below touches the same file it
is because the functional mechanism is new.
Every claim below was verified by grep/read of the actual tree. Line numbers are as of this
audit's snapshot. Wave assignments reference the Q-W1..Q-W6 waves (landed history in
`docs/ARCHIVE.md`; sequencing in `docs/product/code-organization.md` §5).
---
## Findings
### T2-01 — 3× copy-pasted length-prefixed wire `Cursor`, with security-hardening drift
**Location:** `src/provenance.cpp:56–137`, `src/assignment_request.cpp:25–121`,
`src/sample_usage.cpp:25–89` (plus a fourth sibling: `src/vst/bank_sync.cpp:11–28`
`parseBankGeneration` re-rolls the same guarded decimal accumulate).
**Mechanism.** The `<len>':'<bytes>` ext-state wire idiom ("one grammar across every ext-state
seam", per sample_usage's own comment) is implemented as three near-identical `putField` +
`Cursor` copies — and they have **drifted on the hardening**. The two newer copies
(`assignment_request`, `sample_usage`) carry a 20-digit length cap and an overflow guard
(`len > (SIZE_MAX - digit) / 10 → fail`) plus the subtraction-first bounds check
(`len > s_.size() - start`). The oldest copy (`provenance.cpp:65–82`) has **neither**: a crafted
long digit run wraps `len` silently, and the additive bounds check `start + len > s_.size()`
can itself wrap, letting a wrapped length pass. Downstream, `parseFingerprint`
(`provenance.cpp:197–199`) calls `r.trackGuids.reserve(guidCount)` on an **unbounded** count
parsed by the equally unguarded `fieldSizeT` — a corrupt/crafted `Sample.provenance` string in
the bank JSON can drive `reserve(huge)` into `std::length_error`/`bad_alloc` thrown through the
shell. (`sample_usage` fixed exactly this with its `count > wire.size()/4 + 1` sanity bound,
`sample_usage.cpp:121`; the fix was never backported.) `std::string::assign` clamping keeps the
wrap short of UB, but the parse-integrity promise ("never UB, never a partial value") is upheld
in two copies and eroded in the third — the textbook cost of a duplicated algorithm.
**Severity:** High (the drift already produced a concrete robustness gap on a persisted,
user-editable input; the class of bug will recur with every new wire seam).
**Disposition:** **fix-now, split:** (a) backport the hardened `field()` + a count sanity bound
to `provenance.cpp` **in Q-W0** — small, pure, existing `provenance_tests` covers round-trip and
malformed-input paths; (b) the structural collapse (one shared `wire` codec module beside
`core/json`, all three seams + `parseBankGeneration` consuming it) belongs to **Q-W1**, which is
already the serialization-extraction wave. Rationale: the hazard is cheap to close now; the
dedup is a relocation-adjacent move that should ride the wave already creating `core/`.
### T2-02 — a FIFTH hand-rolled JSON decoder the §2 audit did not count
**Location:** `src/tail_control.cpp:88–130` (`valueAfterKey` + `deserializeTailSetting`).
**Mechanism.** The catalogued DRY violation is "JSON `Parser` duplicated 4×" (`bank_model`,
`bank_book`, `view_mode_model`, `owned_manifest`). `tail_control` carries a fifth, structurally
different JSON decode: a substring-scan reader (`json.find("\"key\"")` → skip ws → parse token).
It is correct for the flat single-object payload it reads (the file argues this honestly), but
it is a fifth place JSON-reading behavior is defined, with different tolerance semantics (a key
found inside a *string value* would match — impossible today only because the writer is its own
sole producer). If Q-W1 extracts `core/json` from the four `Parser`s and misses this site, the
"one JSON path" goal is silently not achieved.
**Severity:** Med (no live bug; a completeness gap in the already-planned fix).
**Disposition:** **fix-now, folded into Q-W1** — add `tail_control` to the Q-W1 consumer list
explicitly. Rationale: zero extra cost when `core/json` lands; a stray fifth decoder afterward
would be a defect of the wave.
### T2-03 — `readFileBytes` hand-rolled five times, both sides of the artifact split
**Location:** `src/capture.cpp:232`, `src/capture_realtime.cpp:329` (as `readAllBytes`),
`src/ingest.cpp:86` (comment admits: "of capture.cpp's readFileBytes"),
`src/vst/reasampler_processor.cpp:72`, and inline in `src/vst/reasampler_editor.cpp:749–756`.
**Mechanism.** The identical ifstream-binary-ate/tellg/read whole-file loader exists five times
(two spellings, one anonymous inline). Well past extract-on-third-occurrence, and the copies
already disagree cosmetically (name, empty-on-failure comment placement) — the next divergence
will be behavioral (e.g. one copy gaining a size ceiling the others lack).
**Severity:** Med.
**Disposition:** **fix-now, folded into Q-W1** — a trivial pure `readFileBytes` helper in the
`core/` utility home Q-W1 creates; both CMake targets link it. Rationale: five occurrences of a
ten-line function is pure debt with a zero-risk fix, but creating its home is exactly Q-W1's
job — doing it days earlier in the flat tree would just move the file twice.
### T2-04 — the growing `GetProjExtState` read loop, three copies, pure half only half-used
**Location:** `src/persist.cpp:140–157` (`getProjExtStateString`),
`src/vst/reaper_bridge.cpp:93–107` (self-described "mirrors persist.cpp's growing strategy"),
`src/usage_scan.cpp:168–181` (self-described "the persist.cpp idiom").
**Mechanism.** The grow-buffer-until-it-fits retry loop over `GetProjExtState` is implemented
three times, in three TUs, on both sides of the split. The fiddly part — interpreting the int
return against the filled buffer — is *already extracted pure* as
`bridge_marshal::decodeGetProjExtState`, but only `reaper_bridge` consumes it; `persist` and
`usage_scan` interpret `rv` inline with their own conventions (persist: `rv <= 0` → absent;
bridge: return AND non-empty buffer). The absent-vs-truncated-vs-empty semantics are precisely
the kind of edge that drifts when defined thrice. `usage_scan`'s copy is prune-safety-adjacent
(an unreadable usage record must abort the prune) — its read loop deserves the tested pure
decode, not an inline reimplementation.
**Severity:** Med.
**Disposition:** **fix-now, assigned to the downstream wave that opens `persist`**
(Q-W4 per the current wave map; whichever wave splits `persist.cpp` is the moment). Generalize
the retry policy (next-capacity/done decision) into `bridge_marshal` (or its `core/` successor)
and make all three loops consume it. Rationale: touching persist's session machinery outside
its own wave risks the highest-traffic shell for a dedup that has no live bug today.
### T2-05 — 19 rect structs + ~15 inline point-in-rect predicates across the pure UI family
**Location (structs):** `action_bar.h:61`, `bank_grid.h:23`, `card_drag.h:109`,
`component_geometry.h:28,53,106`, `drag_out.h:40`, `footer_bar.h:41`, `mode_switch.h:21,35`,
`overflow_menu.h:23,39`, `prune_button.h:32,46`, `tab_strip.h:24,51`, `tooltip.h:20`,
`vst/editor_geometry.h:19`, `vst/velocity_curve.h:124`.
**Location (predicates):** inline half-open `px >= r.x && px < r.x + r.width && …` re-typed in
`action_bar.cpp`, `bank_grid.cpp`, `card_drag.cpp` (×2), `component_geometry.cpp` (×2),
`drag_out.cpp`, `footer_bar.cpp`, `mode_switch.cpp`, `overflow_menu.cpp`, `prune_button.cpp`,
`tab_strip.cpp` (×2), `bank_panel.cpp:1049`, plus `vst/editor_geometry.cpp:20`.
**Mechanism.** §2b.2 catalogued the *naming/collision* half of this (the `footer_bar.h` "NAME
NOTE" hand-checking smell). The functional half is uncatalogued: nineteen structurally identical
axis-aligned `{x, y, w, h}` record types, each with its own hand-typed containment predicate.
Every new pure-UI module re-mints both. This is Daniel's heuristic (b) verbatim: N near-identical
concrete implementations that one shared type collapses at compile time — one `ui::Rect` + one
`contains(Rect, x, y)` free function (both already exist in embryo as `vst/editor_geometry`'s
`Rect`/`contains`), with per-module aliases or thin wrappers only where a struct carries extra
fields (e.g. `TabRect::index`). Zero runtime cost; deletes ~15 chances for the next half-open/
closed-interval inconsistency to slip in.
**Severity:** Med.
**Disposition:** **fix-now, folded into Q-W2** (the ui/ relocation wave) — collapsing the type
zoo is nearly free precisely when every one of these files is being moved and re-namespaced;
doing it pre-reorg would churn 19 headers twice. Rationale: same-moment-as-relocation is the
stated principle for renames (§2b intro); it holds identically for type unification.
### T2-06 — pure-computable layout math stranded in the VST editor shell (the §2 scope gap)
**Location:** `src/vst/reasampler_editor.cpp` — `SampleFaceLayout` (~line 922) and its builder,
`ClusterLayout` (~line 964), `zonesStripArea`/`noteEntryFieldsArea`/`noteEntryFieldRect`/
`zonesControlPanel`/`zonesDeckArea`/`zonesCurveButton` (lines 992–1042), the channel-toggle
segment rects (~line 1065), banner rect math (~line 1195), among ~49 inline geometry
computations across the 3,065-LOC TU.
**Mechanism.** The codebase's own grammar homes exactly this class of math in pure modules
(`editor_geometry`, `knob_deck`, `curve_popup`, `capture_browser`, …), yet the editor shell has
accreted a second, untested layout layer: whole named layout structs and pure `Rect → Rect`
functions that take only ints and rects, compiled into the one TU that cannot be unit-tested
without a host window. This is the mirrored form of the pure/shell leak (algorithm math living
untestable in a shell). Note also the audit-scope gap this exposes: §2's god-module catalogue
covered the extension tree only — `reasampler_editor.cpp` (3,065 LOC) and
`reasampler_processor.cpp` (1,164 LOC) repeat the bank_panel pattern on the VST side and appear
in no existing finding.
**Severity:** Med (no correctness bug found in the stranded math; the cost is untestability and
the growth trajectory — the editor gained ~500 LOC/phase through r11).
**Disposition:** **document-and-defer, with a named reshape:** Q-W0 should surface a downstream
point (the wave that opens `src/vst/`, or a new one) hoisting the Sample-face/Zone-panel layout
into the existing pure homes (`editor_geometry` is the natural owner). Rationale: a hoist is a
behavior-preserving mechanical move best done under the reorg's test discipline, not pre-reorg;
but it must be a recorded point or the layer keeps growing.
### T2-07 — the extension links the entire voice engine to serialize one preset blob
**Location:** `CMakeLists.txt:383–385` (`instrument_drop` → PUBLIC `sample_map`);
`src/instrument_drop.cpp` includes `vst/sample_map.h`, which pulls `sampler_core.h` →
`pitch_shift.h` + `velocity_curve.h`.
**Mechanism.** `instrument_drop` (extension side) deliberately reuses
`sample_map::serializeComponentState` so the `.vstpreset` payload and the instrument's own
reader cannot drift — the right DRY call, explicitly documented in CMake. But the shared writer
lives *inside* the module that also owns zone resolution, WAV decode plumbing, and (via header
fan-in) the whole voice engine — so `reaper_reasampler` compiles and links `sampler_core`,
`pitch_shift`, and `velocity_curve` object code it never executes. The abstraction is right; its
*granularity* is wrong: the ComponentState codec is not separable from the engine stack today.
**Severity:** Low (dead weight in the binary and a misleading dependency edge; no runtime cost —
heuristic (c) is about call chains, which this does not add).
**Disposition:** **document-and-defer to Q-W1/Q-W2 module-homing:** when serialization gets its
`core/` home, split a `component_state` codec module (types + serialize/deserialize only) out of
`sample_map`; both artifacts link the codec, only the VST links the engine. Rationale: purely
structural, zero behavior change, and exactly the kind of module-boundary decision the reorg
waves exist to make once, deliberately.
### T2-08 — WAV/RIFF byte-format knowledge spread across four modules, two chunk walkers
**Location:** `src/wav_trim.cpp` (canonical parse: `parseWavLayout`/`extractFloatFrames`),
`src/capture_paths.cpp:31–115` (a second, independent RIFF chunk walker for content hashing),
`src/ingest.cpp:108–160` (hand-built 32f WAV writer), `src/capture_realtime.cpp:423` (in-place
RIFF/data size patch).
**Mechanism.** The tree is disciplined about *decoding* ("no third WAV reader" — sample_map,
editor, processor all route through `wav_trim`), but RIFF *container* knowledge is still minted
per site: `capture_paths` walks chunks with its own tag/size/pad-byte logic to hash `fmt `+`data`
while skipping metadata; `wav_trim` walks the same container shape for layout; `ingest` writes
headers by hand; `capture_realtime` patches sizes by offset. Four places know the RIFF framing
rules (even-byte padding, chunk-header arithmetic); a drift in any one (e.g. pad-byte handling)
would desynchronize hashing from decoding — the dedup-by-hash and null-test invariants both sit
on this.
**Severity:** Low (all four are currently correct against each other by inspection; the smell is
the maintenance surface, not a live divergence).
**Disposition:** **document-and-defer** — consolidate into a `core/wav` home (walker + layout +
writer + patch) when the reorg assigns module homes. Rationale: pre-reorg consolidation churns
the capture hot path (§3 guardrail) for no functional gain; the reorg wave that relocates
`wav_trim` is the natural moment.
### T2-09 — the two capture backends' Sample-stamping epilogue is copy-paste with silent divergences
**Location:** `src/capture.cpp:490–537` vs `src/capture_realtime.cpp:505–540`.
**Mechanism.** The finished-capture metadata stamp — `trackGuids`, `channelCount`, `sampleRate`,
`Master_GetTempo`, the `TimeMap_GetTimeSigAtTime` block, the WAV-aware `hashWavContent` content
hash (comment block duplicated verbatim, ~10 lines), `createdTimestamp` — is written twice, once
per backend. The copies have already diverged in quiet ways: offline passes `proj = nullptr`
(active project) to `TimeMap_GetTimeSigAtTime` while realtime pins `st.proj_`; the sampleRate
fallback logic differs in shape; realtime overrides `lengthSeconds` post-hoc. Some divergence is
semantic (realtime's tail-trim length), but the shared stamp is one concept — a future field
(e.g. a new provenance stamp) must currently be added in two places, and the time-sig
active-project vs pinned-project asymmetry is exactly the kind of drift that produces a
wrong-project stamp during a background-project capture.
**Severity:** Med.
**Disposition:** **fix-now, folded into Q-W3** (the wave already hoisting capture orchestration
out of `main.cpp` / right-sizing `capture.h`). Extract a `stampCaptureSample(Sample&, const
CaptureRequest&, ReaProject*)` shared helper; the divergent bits (length override) stay in the
realtime caller. Rationale: the fix touches both backend TUs, which Q-W3 opens anyway; doing it
there keeps one review of the precision-invariant-adjacent code.
### T2-10 — the two thumbnail pipelines' cache-invalidation strategies have drifted
**Location:** `src/bank_panel.cpp:422–483` (extension: `computeThumbnail` + pure
`ThumbnailKey{id, width, generation}` via `bank_grid::thumbnailKeyString`) vs
`src/vst/reasampler_editor.cpp:715–789` (VST: `monoPcmFor` keyed by bare `sampleId`,
`thumbnailFor` keyed by ad-hoc `sampleId + "|" + binCount`, invalidated by wholesale
`clear()` at lines 159–160/894).
**Mechanism.** The dock panel and the VST browser render the same thumbnails through the shared
`peaks::computeEnvelope`, but the caching layer around it was re-designed independently on each
side: the extension bakes the bank generation into a *pure, tested* key type; the editor
hand-concats a string key with no generation and relies on call-site `clear()`s (bank-refresh,
resize). Both are correct **today** — but correctness on the editor side is distributed across
remembering every clear site, and the bin-clamp guard comment ("computeEnvelope pads binCount >
frameCount…") is duplicated verbatim in both TUs (`bank_panel.cpp:462`,
`reasampler_editor.cpp:780`), marking the copied design. A future refresh path that forgets the
clear shows stale waveforms with no test to catch it.
**Severity:** Low.
**Disposition:** **document-and-defer** — when T2-06's layout hoist opens the editor, adopt the
pure `ThumbnailKey` (or a shared `thumb_cache` helper) on the VST side. Rationale: no live bug;
unifying cache policy is a natural rider on the editor wave, pointless as standalone churn.
### T2-11 — ComponentState v1→v11 deserialize chain: sound, but the legacy branches triplicate the shared read
**Location:** `src/vst/sample_map.cpp:775–945` (`deserializeComponentState`).
**Mechanism.** Audited the full lift chain for functional soundness: the bounded `ByteReader`
latches on truncation, every version's tail fields carry per-field corrupt fallbacks
(previewVelocity → mid default, voiceCount → default-not-clamp, gain → unity, refs → keep-parsed
prefix), and the strict-prefix envelope discipline is honest. **No correctness finding.** The
smell is shape: the v3, v4, and v5 branches each re-implement the mode-byte → marker → idLen/id
→ zones read sequence that the v6+ shared path also implements (three near-copies of the same
cursor walk, lines 806–841 vs 851+), and each new envelope version adds another
`version >= kꞏꞏꞏV*Version` stanza to a function already ~170 lines long.
**Severity:** Low.
**Disposition:** **document-and-defer, explicitly.** The legacy branches are frozen back-compat
contract code with saved-project blobs as their only callers; rewriting them into a table-driven
lift risks the one thing they must never break, for zero user-visible gain. Record the pattern
so the *next* envelope bump (v12) prefers extending the shared path over minting another branch.
(The unbounded-suffix version-constant naming is §2b territory; not restated.)
---
## Surfaces checked and found clean
Recorded per the wave's no-silent-omission rule; each was read/grepped this audit.
- **Pure-module include hygiene, both trees.** Every module CLAUDE.md claims pure was scanned
for REAPER/SWELL/WDL/LICE/VST3-SDK includes: all clean, `src/` and `src/vst/` both. The one
grep hit in `pitch_shift.h` is a comment (the S16 WDL-exclusion note), not an include. The one
cross-tree include (`instrument_drop` → `vst/sample_map.h`) is pure-to-pure — see T2-07 for
the granularity concern; it is not a boundary violation.
- **`bank_sync`** — the generation/consume decision rules are pure, explicit, and exhaustively
commented (rules 1–4); `parseBankGeneration` is overflow-guarded (its duplication is rolled
into T2-01's family, not a separate defect).
- **`bridge_marshal`** — one honest job, done pure, with the S1 string-scan JSON reader
documented as retired (verified: no second JSON parser on the VST side; `sample_map` routes
through `BankBook::deserialize`).
- **The realtime record lifecycle** — *not* an implicit state machine: `RecordPhase` is an
explicit enum with pure per-tick transitions in `realtime_record.h`; `main.cpp` holds only the
handle + project pointer. (Its *residence* in main.cpp is catalogued §2.1; nothing functional
to add.)
- **Project-identity transitions** — `classifyProjectTransition` is pure (capture_paths), the
shell passes `sameProjectObject` as a bool to keep it so; the GUID-primary layering is
decision-tabled in one place.
- **`usage_scan`** — every decision delegated to pure `sample_usage`; container recursion is
depth-bounded with a protect-on-truncation fail-safe; the `std::function` parm-getter
indirection is prune-scan-cold (heuristic (c) satisfied — no hot-path chain).
- **Exception boundaries** — the three `catch (...)` sites (`bank_book.cpp:794` stol guard,
`instrument_drop_win.cpp:74` REAPER-callback boundary, `render_settings.cpp:180` stod guard)
are all documented, narrow, and non-swallowing in intent (each converts to an explicit
failure value). No silent error swallowing found.
- **`FxBypassGuard` (main.cpp) vs `view.cpp` park/restore** — both are snapshot-mutate-restore
over track flags and *look* like a dedup candidate; they are deliberately not one. Different
flag sets, different invariants (precision-neutralization vs Design-View parking), different
failure postures. Duplication of shape, not of concept — correctly left separate.
- **Path resolution** — `capture_paths::resolveBankFile` is the single resolver on both sides
of the split (panel, insert, drag_out, editor, processor). No parallel path logic.
- **WAV decode on the play path** — `wav_trim` is genuinely the only decoder (T2-08 concerns
the *container* knowledge spread, not a second decoder).
- **Draw layer** — the VST editor/embed compile the same `draw_kit`/`theme`/`component_geometry`
the extension uses (verified in CMake + includes); no parallel draw vocabulary grew on the
VST side.
- **Interface cost audit (heuristic (c))** — `ICaptureBackend` is the tree's only virtual
interface; two real implementations, dispatched once per capture (cold). No hot-path virtual
or std::function chain found in `sampler_core`/`pitch_shift`/`sample_map` (all static calls).
No interface-with-one-implementation found anywhere.
- **Boolean-parameter proliferation** — swept `src/` headers for multi-bool signatures; the only
hit is `bank_grid::applyClick(…, bool ctrl, bool shift, …)`, which mirrors physical modifier
keys and reads fine at call sites. Not a finding.
## Cross-checks against the §2/§2b audits (gaps noted, not restated)
- §2's evidence base is scoped to the extension tree ("45 files / ~19,800 LOC"); the full tree
is now ~39,000 LOC. The VST shells repeat the god-module pattern uncatalogued
(`reasampler_editor.cpp` 3,065 LOC, `reasampler_processor.cpp` 1,164 LOC) — carried here as
T2-06's scope note so the reorg waves size the `src/vst/` work realistically.
- §2.1's "4× JSON Parser" undercounts by one — T2-02 (`tail_control`).
- §2b.2's shared-rect naming hazard has an uncatalogued functional twin — T2-05.
## Summary table
| ID | Finding | Severity | Disposition | Where |
|-------|---------------------------------------------------------------|----------|-------------------|--------------|
| T2-01 | Wire `Cursor` ×3 with hardening drift; provenance unguarded | High | fix-now (split) | Q-W0 backport + Q-W1 dedup |
| T2-02 | Fifth JSON decoder in `tail_control` | Med | fix-now | Q-W1 |
| T2-03 | `readFileBytes` ×5 across both artifacts | Med | fix-now | Q-W1 |
| T2-04 | Growing ext-state read loop ×3; pure decode half-adopted | Med | fix-now | persist's wave (Q-W4) |
| T2-05 | 19 rect structs + ~15 inline point-in-rect predicates | Med | fix-now | Q-W2 |
| T2-06 | Layout math stranded in VST editor shell (+§2 scope gap) | Med | document-and-defer (named reshape) | src/vst wave |
| T2-07 | Extension links voice engine to share the preset serializer | Low | document-and-defer | Q-W1/Q-W2 homing |
| T2-08 | RIFF container knowledge in 4 modules / 2 chunk walkers | Low | document-and-defer | core/wav homing |
| T2-09 | Capture backends' Sample-stamp epilogue copy-paste w/ drift | Med | fix-now | Q-W3 |
| T2-10 | Thumbnail cache-invalidation strategies drifted across split | Low | document-and-defer | editor wave |
| T2-11 | ComponentState legacy lift branches triplicate the shared read | Low | document-and-defer | (pattern note for v12) |
docs/product/audit-notes/q-w0-t3-env-constants.md
+220
View File
@@ -0,0 +1,220 @@
# Q-W0 Track 3 — env-coupled-constant domain-modeling audit
Static analysis, 2026-07-28, branch `pq-w0-audit`. Scope: any value stored in an
environment-coupled domain — frames, sample rate, DPI, pixels, tick cadence — that should be
stored **rate-free / device-free and resolved at the point of use** (`docs/product/code-organization.md`
§2c.3 env-coupled bullet; the load-bearing `sample_map` seconds invariant, documented in
`src/core/instrument/CLAUDE.md`). Findings are domain-modeling calls, not "rescale by rate" patches. The judgment bar
applied: a finding requires (a) an env-coupled *stored* domain AND (b) an environment that can
actually change under it. Frame counts computed transiently from seconds at the use site are
correct and are not reported.
Waves referenced for disposition: Q-W1..Q-W6 open `bank_panel.cpp`, `main.cpp`, `actions.cpp`,
`persist.cpp`, and relocate the clean pure libs — **no downstream wave opens
`reasampler_processor.cpp` / `sampler_core.h` / `reasampler_editor.cpp` for logic change**, so
fix-now findings in those files must be remediated in Q-W0 itself.
---
## Findings
### T3-01 — master-gain ramp step is a frame-domain constant anchored to 48 kHz
- **Location:** `src/vst/reasampler_processor.cpp:46-51` (`kGainRampRate = 1.0f / 960.0f`,
`kGainRampSnap`), applied per-sample at `:1069-1085` (stereo) and `:1114-1126` (mono).
- **Stored vs. correct domain:** stored as a **per-sample linear step** — `960` is literally
20 ms × 48 000 Hz, and the comment says so ("960 samples @ 48 kHz ≈ 20 ms"). The intended
quantity is a **wall-clock ramp time** (~20 ms); the correct model is a seconds/ms constant
with the per-sample step derived from `sampleRate_` at `setupProcessing` — exactly the
pattern the same file already uses two paragraphs away for `kPreserveWindowMs`
(`:618-623`, `:733-735`).
- **What breaks when the environment shifts:** the ramp's wall-clock length halves at 96 kHz
(~10 ms) and quarters at 192 kHz (~5 ms); at 44.1 kHz it stretches to ~21.8 ms. The FB1
"no zipper" contract degrades silently as the host rate rises. Not persisted, so no on-disk
breakage — but it is a live hardcoded-rate assumption in `src/`, which Daniel's standing
ruling forbids.
- **Severity:** Med.
- **Disposition:** **fix-now, remediated in Q-W0.** Rationale: trivial, isolated,
behavior-identical at 48 kHz; no downstream wave opens this file, so deferring means keeping
a named violation of the no-hardcoded-rate ruling through the whole reorg. Store
`kGainRampSeconds = 0.020`, derive the step from the live rate where `sampleRate_` is set.
### T3-02 — takeover-declick decay is a per-frame coefficient (documented deliberate)
- **Location:** `src/vst/sampler_core.h:409-410` (`kDeclickDecay = 0.95`,
`kDeclickFloor = 1e-4`), applied per output frame in `sampler_core.cpp:514-519`, `:643-645`.
- **Stored vs. correct domain:** a per-output-frame exponential coefficient; the implied
wall-clock decay-to-floor is ~4.2 ms at 44.1 kHz and ~1.9 ms at 96 kHz. The strict
domain-model form would be a time constant in seconds resolved to a coefficient at engine
build.
- **What breaks when the environment shifts:** the takeover-blend residue fades ~2× faster at
96 kHz. Audibly negligible for a declick micro-ramp — and the in-code comment
(`sampler_core.h:397-401`) **already documents this as a deliberate per-frame DSP micro-ramp,
"not a stored wall-clock quantity"**, with the 44.1–96 kHz variance stated and accepted.
- **Severity:** Low.
- **Disposition:** **document-and-defer.** Rationale: the coupling is already an explicit,
written, bounded design decision in the code; converting it buys no audible improvement.
Triage should ratify the in-code note as the record.
### T3-03 — Trigger-fade UI throw ceiling hardcodes 2 s × 44 100 as `88200.0` frames
- **Location:** `src/vst/reasampler_editor.cpp:395`
(`constexpr double kFadeMaxFrames = 88200.0`), used by `controlValue`/the commit path to
normalize the Trigger fade-in/out knobs.
- **Stored vs. correct domain:** the fade **storage** domain (int64 SOURCE frames, persisted in
the zones payload) is settled and correct — a source-timeline fact, invariant under project-
rate change (`docs/ARCHIVE.md` §S15). The *UI ceiling*, however, encodes a wall-clock intent ("2-second
max fade throw") as a frame count at an assumed 44.1 kHz source. `88200` is a rate-derived
literal in `src/`, brushing the no-hardcoded-rate ruling even though it never touches disk.
- **What breaks when the environment shifts:** the environment here is the **source file's
rate**: a 96 kHz capture's maximum fade throw is ~0.92 s; a 22.05 kHz file gets 4 s. The knob's
full-scale meaning silently varies per loaded sample.
- **Severity:** Low (UI-only, not persisted, comment flags it as a "build-time residual — one
place to retune").
- **Disposition:** **fix-now, remediated in Q-W0.** Rationale: small and contained — replace
with `kFadeMaxSeconds = 2.0` resolved against the loaded source's rate at the two normalize
sites (the editor already threads `frameCount + rate` through the pack/unpack path,
`envelope_edit.cpp:148`); storage domain unchanged. If triage prefers zero UI-feel change,
the fallback is document-and-defer with the comment amended to name the 44.1 k assumption.
### T3-04 — drop-hint banner duration stored in sync-timer ticks
- **Location:** `src/vst/reasampler_editor.cpp:2920-2923` (`dropHintTicks_ = 6`), decayed in
`onSyncTimer` (`:244-245`); field at `reasampler_editor.h:457`.
- **Stored vs. correct domain:** a wall-clock intent ("a few seconds of banner") stored as a
**count of `kSyncTimerIntervalMs` ticks** (6 × 500 ms). Correct model: a duration in ms,
ticks derived — or a `GetTickCount`-style deadline like the bank panel's tooltip already
uses.
- **What breaks when the environment shifts:** retuning the sync cadence (a plausible perf
tweak — the 500 ms value is itself a tuning constant) silently changes the banner duration.
The comment does state the coupling.
- **Severity:** Low.
- **Disposition:** **document-and-defer.** Rationale: cosmetic, self-documenting at the single
site, and the cadence and hint decay live three lines apart; a fix is fine to fold in
opportunistically if the file is ever opened, but does not justify a Q-W0 edit on its own.
### T3-05 — systemic: no DPI/content-scale support in either UI surface
- **Location:** systemic. VST3 editor: `reasampler_editor.cpp:150-153` (`ViewRect(0,0,840,620)`
default and the size floor at `:816`), all `editor_geometry` / `knob_deck` / `curve_popup` /
`envelope_overlay` px constants (e.g. the 8 px node min-separation, the 28×28 curve button),
cached font sizes in `draw_kit`. Extension side: the LICE-drawn `bank_panel` dock and its
geometry modules. No implementation of VST3's `IPlugViewContentScaleSupport` anywhere in
`src/vst/` (grep: zero hits for content-scale/DPI), no scale factor threaded through the
pure geometry modules.
- **Stored vs. correct domain:** every layout constant is a **physical device pixel** that
silently assumes ~96 DPI. Correct model: logical units × one scale factor resolved at draw
time (the pure geometry modules take widths/heights as parameters already, so a scale factor
threads through cleanly — the constants are centralized, which is the good news).
- **What breaks when the environment shifts:** on a 150–200 % Windows display the editor and
dock render physically small (or get bitmap-stretched by the host, blurring text); hit
targets like the 8 px min node separation shrink below comfortable pointer accuracy.
Usability, not correctness — nothing mis-plays and nothing persisted is wrong.
- **Severity:** Med (usability on modern displays; Windows-only product makes high-DPI common).
- **Disposition:** **document-and-defer.** Rationale: a proper UI-scaling pass is a feature
wave of its own (scale plumbing through ~15 geometry modules + font cache + both shells),
far outside Q-W0's remediation budget; deferral should be recorded as a named future phase,
and Q-W1's relocation of the geometry modules should keep the constants centralized so the
eventual scale factor lands in one place.
### T3-06 — legacy v3 zone-payload lift divides by the *current* project rate
- **Location:** `src/vst/sample_map.cpp:601-605` (v3 lift inside `readZonesPayload`), format
note at `sample_map.h:439-456`, `:510-513`.
- **Stored vs. correct domain:** the v3 blobs (Daniel's beta projects) stored wall-clock times
as frames — **the prior incident itself**. The lift converts frames → seconds by dividing by
the live `projectRate` threaded in at read time. That is exact only if the project rate today
equals the rate in effect when the S15/S16 editor wrote the frames; the write-era rate was
never recorded, so a project whose rate changed since lifts skewed times (old/new ratio,
e.g. ~8.8 % for 44.1→48 k).
- **What breaks when the environment shifts:** already broken by construction for
rate-changed-since-write projects; a one-time lift residue, after which v5+ re-saves in
seconds and the skew is frozen in, silently.
- **Severity:** Low (legacy-only, beta-project blobs, envelope-time magnitudes; unrecoverable
in principle — the missing datum was never written).
- **Disposition:** **document-and-defer.** Rationale: no better conversion exists; this is the
documented residue of the incident that motivated the seconds invariant. Worth one sentence
in the code-quality-audit report so the skew is a recorded known, not a mystery bug later.
### T3-07 — SOLA correlation-segment cap of 512 frames (deliberate CPU bound; cross-ref T1)
- **Location:** `src/vst/pitch_shift.cpp:72`
(`corrFrames_ = max(1, min(dLow_ - 1, 512))`; rationale comment at `:64-67`).
- **Stored vs. correct domain:** borderline by design. The quantity being bounded is **work per
splice** (multiply-accumulates), which is genuinely frame-domain — a CPU bound *should* be in
frames. The side effect is that the correlation segment's wall-clock span halves at 96 kHz
(512 frames ≈ 11.6 ms at 44.1 k, ≈ 5.3 ms at 96 k), raising the lowest frequency the
alignment search can lock onto at high rates. All other shifter geometry correctly derives
from `kPreserveWindowMs` resolved at the live rate.
- **What breaks when the environment shifts:** alignment quality for low-frequency content
degrades somewhat at high host rates; no correctness or persistence impact.
- **Severity:** Low.
- **Disposition:** **document-and-defer**, and hand to the T1 DSP audit for the quality call.
Rationale: the frame domain is arguably correct for a compute bound; whether 512 is the right
*number* is an algorithm-quality question (T1's territory), not a domain-modeling one.
---
## Surfaces checked clean
- **`sample_map` v5+ persistence (the reference implementation):** AHDSR + pitch-env times as
SECONDS doubles; no rate constant anywhere in the read/write paths (`kLegacyV3NominalRate`
deliberately does not exist); legacy v3 lift takes the rate as a parameter. Clean.
- **ComponentState envelope v6–v11 fields:** channel mode, assign generation, preview velocity,
voice count/mode/trigger, `masterGainLinear` (dimensionless linear), explicit flag,
`SampleRefs` (paths + root/loop/channels intrinsics), `instanceGuid` — all rate-free or
file-fact domains. Clean.
- **Trigger `fadeInFrames`/`fadeOutFrames`/`startPoint`/`SampleLoop.start/end` persisted as
int64 SOURCE frames:** deliberate, settled source-timeline facts (`docs/ARCHIVE.md` §S15;
`bank_model.h:66-72` documents the loop rationale) — frames *of the file* are invariant under
project-rate change; the file's own rate is stored alongside and resolved at decode. Correct
domain, not a finding.
- **`trigger_seam`:** frames↔fraction with `startFrame` threaded both directions; the overlay's
fraction domain is expressly rate-invariant. Clean.
- **`kPreserveWindowMs` (50 ms):** resolved to frames against the live host rate at both call
sites (`reasampler_processor.cpp:618-623`, `:733-735`) — the correct pattern, cited here as
the model T3-01 should copy.
- **`pitch_shift` internal geometry:** ring length, fade, lag band, delay band all derived from
the rate-resolved `window_`; ratio-scaled live fade length. Clean (T3-07 cap noted above).
- **Tail system:** `TailSetting.manualMs` persisted in **ms**; `kMaxTailSeconds`/`kMaxTailMs`
wall-clock; trim threshold in **dB** with the linear ratio derived
(`render_settings.h:59-86`); the realtime decay scan resolves frames against the **file's own
authoritative rate** (`capture_realtime.cpp:384-408`). Clean.
- **`wav_trim`:** frame counts are parsed file facts and transient truncate plans. Clean.
- **`bank_model` persisted metadata:** source bounds in seconds + PPQ (both stored, each for
its consumer); loudness in dB; `sampleRate`/`channelCount` are *recorded facts about the
file*, not assumptions; capture tempo + meter stamped at capture time deliberately so the
bars.beats read-out is stable under later project meter changes (`card_meta`). Clean.
- **Ext-state wires** (`banks` JSON, view-mode model, owned manifest, `assignment_request`,
`rsusage_*`): no frame-domain values; the rate field in the assign wire is a recorded fact.
Clean.
- **Envelope schematic (`envelope_overlay`/`envelope_edit`):** param-domain px↔seconds scale
derived from the live rect (`gatePxPerSecond`), sample-length-free; editor time-slider
ceiling is `kEnvTimeMaxSeconds = 2.0` (seconds). Clean (pixel constants themselves fall under
the systemic T3-05).
- **Timers:** bank_panel tooltip delay uses `GetTickCount()` ms against `kTooltipDelayMs = 500`
(wall-clock — the pattern T3-04 should copy); editor sync timer is a 500 ms `SetTimer`
interval (ms, not ticks); the new-content detector is an event diff per tick with no
wall-clock meaning encoded in tick counts; `retireIdleDrain` is idleness-driven, not
time-driven. Clean.
- **`peaks` / `waveform_view` / `master_gain` / `velocity_curve` / `keyboard_strip`:** bins and
columns derived from rects at use; dB↔linear taper and curve math dimensionless; key rects
from the passed strip rect. Clean.
## Summary
| ID | Location | Stored domain | Severity | Disposition |
|----|----------|---------------|----------|-------------|
| T3-01 | `reasampler_processor.cpp:46-51` gain-ramp step | per-sample step (20 ms @ 48 k baked in) | Med | **Fix-now (Q-W0)** — store seconds, derive step from `sampleRate_` |
| T3-02 | `sampler_core.h:409-410` declick decay | per-frame coefficient | Low | Document-and-defer — deliberate, already documented in-code |
| T3-03 | `reasampler_editor.cpp:395` fade throw ceiling | 88200 source frames (2 s @ 44.1 k) | Low | **Fix-now (Q-W0)** — seconds ceiling resolved vs. source rate at use |
| T3-04 | `reasampler_editor.cpp:2923` drop-hint duration | sync-timer ticks | Low | Document-and-defer — cosmetic, coupling stated in-code |
| T3-05 | systemic (both UI surfaces) | physical px, ~96 DPI assumed; no content-scale | Med | Document-and-defer — a UI-scaling phase of its own; keep geometry constants centralized through Q-W1 |
| T3-06 | `sample_map.cpp:601-605` v3 legacy lift | frames ÷ *current* project rate | Low | Document-and-defer — unrecoverable legacy residue; record as known skew |
| T3-07 | `pitch_shift.cpp:72` correlation cap | 512 frames (CPU bound) | Low | Document-and-defer — frame domain arguably correct for a compute bound; hand to T1 for the quality call |
Two fix-now findings (T3-01, T3-03), both assigned to **Q-W0 itself** — no downstream wave
opens those files for logic change. Five deferrals, each with a recorded rationale. The
persistence surfaces — the highest-stakes case — are clean: every wall-clock quantity written
to disk since the S12 remediation is in seconds or ms, and every frame-domain persisted value
is a source-file fact whose rate travels with it.
docs/product/audit-notes/q-w0-t4-sizing.md
+399
View File
@@ -0,0 +1,399 @@
# Q-W0 Track 4 — structural sizing + placement audit
Date: 2026-07-28 · Branch: `pq-w0-audit` · READ-ONLY static analysis (no build, no code edits)
**Method.** Line counts measured with `wc -l` on the worktree; seams derived from function-definition
skeletons (`grep` for top-level definitions + section markers) plus targeted reads. Acceptance bar =
Daniel's three heuristics: (a) more directories a must, files ≤ ~600 lines, SRP applies to files and
namespaces; (b) templates are good where they dedup at compile time; (c) saved CPU beats abstraction —
no dispatch-stack blowouts, prefer static polymorphism where types are compile-time-known.
**Measured sizes differ from the wave brief in several places** (the tree moved after the brief was
drafted — GA/pS/pS-usage landed): `reasampler_editor.cpp` 3065 (brief said 3035),
`reasampler_processor.cpp` 1164 (1004), `sampler_core.cpp` 968 (1049), `sample_map.cpp` 970 (807),
`sample_map.h` 708 (600), `sampler_core.h` 762 (820), `actions.cpp` 1016 (996), `persist.cpp` 852
(812). All numbers below are the measured ones.
---
## 1. Oversize census + seams
Every `.cpp`/`.h` in `src/` (both sides) over ~600 lines, with the *real* responsibility clusters.
Where a file is genuinely one responsibility, I say so and recommend leaving it.
### 1.1 The four planned splits — do the plan's seams still land sub-600?
**T4-01 — `src/bank_panel.cpp` (3459; plan assumed 2424).**
The plan's six seams (`panel_render` / `panel_thumbnails` / `panel_audition` / `panel_input` /
`panel_bank_ops` / `panel_window`) no longer all land sub-600 at current size. Tally against the
skeleton:
| Planned TU | Functions (line spans) | Est. LOC | Verdict |
|---|---|---|---|
| `panel_thumbnails` | `computeThumbnail`/`thumbnailFor` (420–487) | ~130 | fine |
| `panel_render` | `drawCardMeta`/`drawThumbnail` (487–547), kit adapters (547–570), `drawFooter` (685–780), `drawToolbar`/`drawMoreButton`/`drawTooltip` (992–1155), `drawRegionGrid`/`drawCardDropTarget`/`drawRegionHeader`/`drawTabStrip`/`paintPanel` (1334–1646) | ~700 | **over — needs the layout cut below** |
| *(unplanned)* **`panel_layout`** | toolbar/footer/menu rect + row/cluster builders (571–684, 785–991), split geometry + region rects + L7 slot-order display bridge (1156–1333) | ~500 | **new TU required** — this is pure-ish geometry glue, distinct from LICE drawing; extracting it puts `panel_render` at ~550 |
| `panel_audition` | `initPreview`/`startAudition`/`stopAudition`/`deinitPreview` (1874–1965) | ~90 | fine (keep the direct call-through guardrail) |
| `panel_input` | input helpers + `regionAt` (1965–2010), click routing `handleBanksChromeClick`…`handleKey`/accelerator (2384–2710), plus new-content detection (1647–1874, ~230) | ~800 | **over — needs the drag cut below** |
| *(unplanned)* **`panel_drag`** | `updateDropTarget`/`dropTargetBankId`/`classifyCardDrag`/`applyDragCursor`/`resolveHover`/`updateHover`/`maybeShowTooltip`/`onMouseMove`/`doReorderDrop`/`doReplaceDrop`/`resetDragState`/`onLBtnUp`/`handleRightClick` (2711–3185) | ~475 | **new TU required** — the card-drag/hover state machine is a cohesive cluster of its own (it already has a pure mirror, `card_drag`); extracting it puts `panel_input` at ~550 |
| `panel_bank_ops` | `promptText`/`mintBankId`/`doCreateBank`…`removeSamples`/`focusedSelectionIds`/`resolveDragPathsForOs` (2006–2231) + popup menus (2231–2384) | ~375 | fine (menus ride with bank_ops or input — either works; they invoke the ops) |
| `panel_window` | `handleDropFiles`/`dlgProc`/`openPanel`/`closePanel` (3185–3336) + public API (3336–3459) | ~275 | fine |
**Proposal:** eight TUs, not six — add `panel_layout` and `panel_drag`.
**Severity:** high (it is the biggest file in the repo). **Disposition: reshapes wave Q-W2** —
the wave brief must name eight seams, or two of its six TUs ship >600 on day one.
**T4-02 — `src/main.cpp` (1897; plan assumed 1762).**
The plan's three hoists are the right seams, but `capture_orchestrator` as specced lands **~885
lines** — over by half again. Tally: `FxBypassGuard` (627–731, ~105), `renderOffline` +
`captureAndIndexOne` + `RunCapture` + `RunCaptureItemAssign` (731–909, ~180), batch family
(`ItemSelectionGuard`/`selectOnlyItem`/`RunBatchCaptureItems`/`collectRazorAreas`/
`TrackSelectionGuard`/`RunBatchCaptureRazor`, 909–1181, ~270), `RunRecaptureFromSource` (1200–1398,
~200), realtime + insert actions (1398–1512, ~115). `scope_resolve` (361–590) ≈ 230 ✓;
`realtime_lifecycle` (186–360) ≈ 175 ✓; registration/entry residue (1512–1897) ≈ 385 ✓ (shrinks
further under Q-W6's table).
**Proposal:** split the orchestrator seam once more: `capture_orchestrator` (FxBypassGuard +
single-capture path + realtime/insert action bodies, ~450) and **`capture_batch`** (batch family +
`RunRecaptureFromSource` + the two selection guards, ~470). Recapture is planner-driven like batch
and shares the selection-guard machinery — it belongs with batch, not the single-shot path.
**Severity:** high. **Disposition: reshapes wave Q-W3** — add the fourth TU to the brief.
**T4-03 — `src/actions.cpp` (1016; plan assumed 981).**
Plan's seams still land: `design_view_actions` (59–421, ~360), `bank_actions` (422–1016 minus prune,
~490), `prune_action` (`doBankPruneFolder` 821–916 + registration share, ~130). All sub-600.
**Disposition: no change to Q-W4.**
**T4-04 — `src/persist.cpp` (852; plan assumed 766).**
Plan's seams still land: `ext_state_io` (helpers + `saveToActiveProject` + `writeAssignmentRequest`,
112–288, ~180), `prune_fs` (`scanPruneOrphans`/`pruneDryRun`/`pruneOrphanSet`/`deleteOrphanFile`/
`pruneReclaim`, 288–539, ~250 — pS-usage growth landed here, exactly where the plan isolates it),
`session` (load/guid/poll/reload, 539–852, ~315). All sub-600.
**Disposition: no change to Q-W5.**
### 1.2 Known offenders beyond the planned four — extension side
**T4-05 — `src/bank_book.cpp` (1109) + `bank_book.h` (457).**
Three genuine seams: **`SlotMap`** (27–143, ~115 — a self-contained ordered-slot container with its
own serialize at 614), **`BankBook`** registry/CRUD/transfer/slot-reconcile (145–545, ~400), and
**JSON serialize + `Parser`** (547–1109, ~560). Q-W1 deletes the Parser + `ObjWriter`/`writeEscaped`
copies; what remains of serialization rewired onto `core/json` is ~150.
**Proposal:** after Q-W1, split `slot_map` into its own TU/header pair (it is a distinct type with
its own tests-worthy invariants); `bank_book.cpp` lands ~550. **Severity:** medium.
**Disposition:** fold into Q-W1 (the JSON rewire already opens this file; the `slot_map` file split
is one `git mv`-shaped extraction on top).
**T4-06 — `src/view_mode_model.cpp` (1049) + `view_mode_model.h` (748).**
Four seams: **indexes** (`ModeRegistry`/`MembershipIndex`/`LaneOwnershipIndex`, 29–140), **pure
planners** (`autoTagNewContent`/`planItemRetag`/`planLaneMinting`/`makeParkPlan`/`makeRestorePlan`/
`nextModeId`, 143–326, ~185), **`ViewModeModel`** state + visibility/toggle planning (332–490), and
**JSON serialize + `Parser`** (494–1049, ~555). Q-W1 deletes the Parser (~390); remainder ~660.
**Proposal:** split planners (`view_plan.cpp`) from model+indexes (`view_mode_model.cpp`, ~450 after
JSON extraction). The header's 26 structs split the same way: mode/membership/lane types + model
class vs. the plan-record structs (`TrackPlan`/`TogglePlan`/`AutoTag`/`ItemRetagOp`/`LaneMint*`).
**Severity:** medium. **Disposition:** fold into Q-W1 (JSON rewire opens the file; planner split
rides it). If the wave wants to stay minimal, the planner split can defer — post-extraction ~660 is
marginal, not pathological.
**T4-07 — `src/bank_model.cpp` (767).**
Two seams only: the model (`Sample` equality + `BankIndex` verbs, 25–145, ~120) and JSON
(`ObjWriter`/`writeSample`/`Parser::parseSample`/`parseIndex`, 148–767, ~620). This file is the
poster child for Q-W1: after the extraction it is ~250 total (model + thin serialize using
`core/json`). **Disposition: already owned by Q-W1; no new seam needed.**
**T4-08 — `src/capture_realtime.cpp` (867).**
Two seams: the **async record lifecycle** (`RealtimeCaptureState` snapshot/restore, `begin`/`tick`/
`abort`, 177–324 + 569–867, ~450) and the **file-side finalize** (`readAllBytes`/`writeU32LE`/
`trimAutoTailInPlace`/`finalizeRecording`, 324–566, ~240). The lifecycle is genuinely one
responsibility (the header itself documents why the restore lives on the state object). The finalize
half — WAV byte-patching, decay-scan trim, move-into-bank — is a distinct concern that talks to
`wav_trim`, not to the transport.
**Proposal:** split `capture_realtime_finalize.cpp` (~240); lifecycle TU lands ~600 with the file
banner. Both stay in `shell/capture/`. **Severity:** low-medium. **Disposition:** ride Q-W3 (the
wave already renames this family per the Q-9 naming rider — same-wave file surgery is free).
**T4-09 — `src/view.cpp` (677).**
Two halves: **park/restore + flag application** (`snapshotTrack`/`applyFlags`/`parkFxOffline`/
`restoreFxOffline`/`applyMode`, ~350) and **lane management** (`laneName`/`managedLaneOrdinals`/
`applyLanePlays`/`applyLaneOps`/`readLaneTracks`/`assignItemToLane`/`applyMintPlan`/
`mintManagedLanes`/`reconcileManagedLanes`, ~330). The D2 lane machinery arrived after the file's
original charter and is a separable concern.
**Proposal:** split `view_lanes.cpp`. **Severity:** low (677 is barely over). **Disposition:**
document-and-defer unless Q-W1's relocation is already touching it — then take the free split.
**T4-10 — `src/ingest.cpp` (636).**
Seams: **pure-ish WAV/PCM helpers** (`buildFloat32Wav`/`decodePcmSource` + byte I/O, 86–217, ~130 —
see T4-22: `buildFloat32Wav` is a pure function trapped in a shell TU), **`importFileIntoActiveBank`**
(249–420, ~170), and the three ingest surfaces + registration (420–636). Extracting the pure WAV
build into a testable core module (`wav_write` beside `wav_trim`, or one `wav_codec`) drops the shell
to ~500 and gains a test target.
**Severity:** low-medium. **Disposition:** fix in whichever wave lands the WAV consolidation
(T4-22); the file split itself is a rider.
### 1.3 Known offenders — VST side (entirely absent from the current plan)
**T4-11 — `src/vst/reasampler_editor.cpp` (3065) + `reasampler_editor.h` (539).**
The single biggest unplanned file — it grew past `main.cpp` in the r11 recomposition, *after* the
plan was written. It is now the `bank_panel.cpp` of the VST artifact, with the same god-module
profile. Real seams, from the skeleton:
| Proposed TU | Functions (line spans) | Est. LOC |
|---|---|---|
| `editor_session` | ctor/dtor, `refreshFromBank`/`rebuildVisible`/`onSyncTimer`/`commitAndReload`/`loadSelection`/`upsertPickedOverride`/effective-zone helpers (146–400), PCM + thumbnail caches `monoPcmFor`/`thumbnailFor` (719–800) | ~420 |
| `editor_controls` | control-value map `controlValue`/`applyControl` (399–475), knob-deck plumbing `zoneDeckGroupDescs`/`deckGroupDescs`/`deckControlNorm`/`applyDeckKnob`/`deckValueLabel` (475–649), envelope pack/unpack + `commitPickedMarkers` (649–719), `applyZoneControl` (2576–2587) | ~470 |
| `editor_layout` (pure candidate — see T4-23) | anon-ns geometry: `computeSampleBands`/`clusterRects`/zone-panel areas/`channelToggleRects` (904–1076), `computeBrowseModal` (1756–1785), `zoneContentArea` (1917–1924) | ~250 |
| `editor_paint_sample` | `paint` dispatch (1169), `drawTitleBand`, `paintSample`/`paintEnvelopeOverlay`/`paintVelocityCurve`/`paintKnobDeck`/`paintCurveButton`/`paintCurvePopup`/`paintEmptyState` + `drawKnobFace`/`drawSpectralStrip`/`drawRootMarker` (1076–1756) | ~590 |
| `editor_paint_browse_zone` | `paintBrowse` (1785–1917), `paintZone` (1924–2041) | ~260 |
| `editor_input` | `resolveHover` (2041–2145), `onMouseDown` (2147–2576 — a 430-line per-face dispatch), popup/curve mouse (1637–1735), `onMouseMove`/`onMouseUp`/`onMouseRDown`/`onMouseWheel`/`onSearchChar`/`onFilesDropped` (2587–2929) | ~880 → **split by face**: `editor_input_sample` (~500: sample-face hit branches + drag state + curve popup) and `editor_input_browse_zone` (~380: browser cards/scroll/search + zone strip/note entry) |
| `editor_platform` | IPlugView overrides `isPlatformTypeSupported`/`canResize`/`checkSizeConstraint`/`attachedToParent`/`removedFromParent`/`onSize`/`invalidate` (800–904), `wndProc` + non-Windows stubs (2929–3065) | ~280 |
Seven-to-eight TUs, all sub-600, each a real cohesive cluster (session/bridge state · param
plumbing · layout · paint × 2 · input × 2 · platform). The face structure (Sample / Browse / Zone)
is the natural input/paint split axis — it mirrors how the code already dispatches.
**Severity: highest of the audit** — this is the largest unowned file in the repo.
**Disposition: reshapes the wave plan — needs a new owning wave** (see §1.5 / summary table).
**T4-12 — `src/vst/reasampler_processor.cpp` (1164) + `reasampler_processor.h` (502).**
Four seams: **VST3 lifecycle + bus boilerplate** (`queryInterface`…`setupProcessing`,
`setBusArrangements`, 118–209 + 492–506, ~120), **component-state I/O** (`setState`/`getState` +
`legacyLiftShouldRun`, 209–349 + 774–904, ~270), **accessors/param setters** (349–492, ~140), and
**reload + drain + usage-publish + render** (`reloadInstrument`/`publishUsage`/
`publishBuiltLocked`/`rebuildVoiceEngine`/`retireIdleDrain` 506–774 ~270, `process` 904–1164 ~260).
**Proposal:** three TUs — `processor_state` (state I/O + accessors, ~410), `processor_reload`
(reload/drain/usage, ~290), `reasampler_processor.cpp` (lifecycle + `process()`, ~400). Keep
`process()` and its block-render helpers in one TU (heuristic c — see T4-27). All are member
functions of one class; partial-class-across-TUs is the same pattern the Q-W2 panel split uses.
**Severity:** medium-high. **Disposition:** new VST wave (see §1.5).
**T4-13 — `src/vst/sample_map.cpp` (970) + `sample_map.h` (708).**
Two clean halves plus a small third: **resolution core** (bank-JSON distill/select/list, SampleRefs
management, PCM downmix/extract/decode, `resolvePlay`, keymap builders, performance-map resolution +
`reconcileSingleCaptureZones`, 14–406, ~390) and **binary component-state codec** (`putU32le`/
`putU64le`/`ByteReader`, zones payload put/read, `serializePerformance`/`deserializePerformance`,
`serializeComponentState`/`deserializeComponentState` v3→v11 lift ladder, selection codec,
406–970, ~565).
**Proposal:** split `component_state_io.cpp` (the codec, ~565) from `sample_map.cpp` (resolution,
~400). The header splits the same way: wire/state structs (`ComponentState`/`SampleRefEntry`/codec
decls) vs. resolution API (`SelectedSample`/`PerformanceMap`/`ZonePlaySeconds`/resolvers). This is
the same shape as the extension's model-vs-JSON split and directly reduces rebuild fan-out — the
editor and processor both include `sample_map.h` today and recompile on every codec tweak.
**Severity:** medium-high (the codec grows every ComponentState version bump — v6→v11 in one
quarter; it will cross 600 on its own soon). **Disposition:** new VST wave.
**T4-14 — `src/vst/sampler_core.cpp` (968) + `sampler_core.h` (762).**
Contents: pitch math (15–30), `Keymap` (34–58), `AdsrEnvelope`/`TriggerEnvelope`/`PitchEnvelope`
(62–251, ~190), `Voice` (255–680 — `advanceFrame` alone is ~200), `VoiceEngine` (680–968, ~290).
**This TU is a genuine single responsibility — the realtime voice engine — and it is the hottest
code in the repo.** Every function in it sits on the per-sample render path; the envelope `tick()`s
and `Voice::advanceFrame` benefit from same-TU inlining (no LTO assumption in the build). Splitting
the .cpp along class lines would put per-sample calls across TU boundaries — precisely the
heuristic-(c) violation the phase forbids.
**Proposal:** **leave the TU whole at 968** (documented exception to the 600 bar, justified by the
hot path), but **split the header**, which is where the pain actually is: `zone_params.h` (the enums
+ `AdsrParams`/`TriggerParams`/`PitchEnvParams`/`ZonePlayParams`/`SampleLoop`/`SampleData` — what
`sample_map`, the editor, and the codec actually need, ~250) vs. `sampler_core.h` (Keymap + the
engine classes, ~500). Today every UI TU that reads a param struct recompiles when a `Voice` member
changes. **Severity:** medium. **Disposition:** header split in the new VST wave; TU stays —
recommend recording the exception in the wave brief so nobody "fixes" it later.
**T4-15 — `src/view_mode_model.h` (748)** — covered under T4-06 (splits with its TU).
**T4-16 — `src/vst/sample_map.h` (708)** — covered under T4-13.
**T4-17 — `src/vst/sampler_core.h` (762)** — covered under T4-14.
### 1.4 Borderline (no action, for the record)
`capture.cpp` (549), `reasampler_editor.h` (539 — shrinks when the editor splits move private
helpers into their TUs), `reasampler_processor.h` (502 — same), `bank_book.h` (457), `pitch_shift.cpp`
(371 — single responsibility, hot, leave), `persist.h`/`capture.h` (341/234 — Q-W6 fat-header pass
already owns them). None need action beyond what their TU splits imply.
### 1.5 The structural conclusion for the wave plan
The existing plan splits 4 files, all extension-side. The census says **9 files need splitting and 2
need header-only splits — 5 of them VST-side, which currently have no owning wave.** The VST work is
the same kind and size as Q-W2 (the editor alone ≈ the old bank_panel). Recommendation: add one VST
god-module wave (call it **Q-W2v**, runnable in parallel with Q-W2 — different artifact, zero file
overlap; or sequence after W5 as Q-W7 if Daniel wants serial waves). Q-W1's relocation scope also
grows: the ~20 clean VST pure libs relocate + namespace in W1 alongside the extension's 30.
---
## 2. `src/vst/` placement in the Q-3 directory map
The settled Q-3 map (`core/{model,view,capture,audio,ui,reclaim,version,json}`,
`shell/{capture,panel,view,persist,actions}`, `app/`) covers only the extension. Two viable shapes
for the VST artifact; **this is Daniel's fork to call at triage.**
**T4-18 — Leading recommendation: integrate into the same `core/`/`shell/` top split, with
`instrument/` subsystem dirs beneath.**
```
core/instrument/engine/ sampler_core, pitch_shift, velocity_curve, master_gain
core/instrument/map/ sample_map (+component_state_io), bank_sync, bridge_marshal, note_entry, trigger_seam
core/instrument/ui/ editor_geometry, keyboard_strip, waveform_view, capture_browser,
browser_scroll, param_slider, knob_deck, curve_popup,
envelope_overlay, envelope_edit, embed_strip
shell/instrument/ reaper_bridge, processor TUs, editor TUs, reasampler_embed, vst_entry,
reasampler_vst.h / reasampler_uid.h
```
Rationale:
1. **One rule, no special case.** Q-3's settled reasoning is "top-level by the load-bearing
discipline, because the pure/shell split is the invariant worth making structural." That reasoning
is artifact-agnostic — a file's directory should tell you whether it may touch a *host* type
(REAPER or VST3 SDK), and `shell/instrument/` says exactly that.
2. **The artifact boundary is a link-graph fact, not a source-layout fact — and the sources already
straddle it.** Verified cross-artifact consumers: `sample_map` links `bank_book` + `wav_trim` +
`sampler_core`; the editor includes `draw_kit`/`theme`/`component_geometry`/`capture_paths`/
`peaks`/`wav_trim`/`app_version`/`ext_keys` (extension-side modules); the extension's pure
`instrument_drop` includes `vst/reasampler_uid.h`. An artifact-first subtree would either
duplicate these or still reach across — the boundary it draws is already false.
3. **Namespace map falls out:** `reasampler::instrument::{engine,map,ui}` beside
`reasampler::model` etc. — the Q-4 rule applied uniformly.
4. **CMake impact: path edits only.** Targets, links, and test executables are unchanged; the
VST3-gate (`EXISTS pluginfactory.cpp`) already guards targets, not directories.
Cost to name: the VST3-gated targets stay interleaved through the top-level `CMakeLists.txt` rather
than being isolatable behind one `add_subdirectory`. Mitigable by grouping the instrument targets
into one guarded block (or one `include()`d .cmake file) without moving sources.
**T4-19 — Alternative: parallel artifact-first subtree** — `src/vst/core/{engine,map,ui}` +
`src/vst/shell/`, extension keeps `src/core|shell|app`. Pros: the artifact boundary is visible at
top level; the whole VST tree (sources *and* a dedicated `src/vst/CMakeLists.txt`) can sit behind
one SDK-gated `add_subdirectory`, which is the cleanest possible expression of "this half only
exists on Windows with the submodule slice". Cons: two parallel `core/` trees dilute the "directory
= may it touch a host type" invariant into "check which subtree first"; the shared-module reality
(point 2 above) means the subtree is not actually self-contained — its purity is cosmetic; and the
gated-`add_subdirectory` win is achievable under T4-18 with an `include()` anyway. **Recommend
T4-18; T4-19 is defensible if Daniel weighs artifact legibility above discipline uniformity.**
**Disposition: reshapes Q-W1** (the relocation wave executes whichever shape is chosen).
---
## 3. Template-collapse opportunities
Judged per heuristic (b) — proposed only where duplication is real and the template earns it; two
anti-recommendations included, because a forced template is the worse smell.
**T4-20 — Little-endian byte codec: real template win.**
Five hand-rolled copies, verified: `putU32le`/`putU64le` + `ByteReader` (`vst/sample_map.cpp`
406–500), `writeU32LE` (`capture_realtime.cpp` 342), `readU32LE` lambda (`capture_paths.cpp` 49),
`putU32` lambda (`ingest.cpp` 134), `appendU32LE` (`instrument_drop.cpp` 18). One header —
`core/wire/bytes.h` (or beside `core/json`): `template <class T> void putLE(std::vector<uint8_t>&,
T)` / `template <class T> bool readLE(ByteReader&, T&)` with the double↔bits helpers — replaces all
five, compile-time dispatched, zero runtime cost, and gives the ComponentState codec (T4-13) a
tested primitive. Entirely off hot paths (serialization/file I/O only).
**Severity:** medium (each new ComponentState version re-duplicates today). **Disposition:** fix in
the wave that lands `component_state_io` (the biggest consumer); consumers rewire opportunistically.
**T4-21 — Rect family: unify, but with a concrete type, NOT a template.**
Verified 12+ byte-identical `{int x,y,width,height}` structs (`ActionBarRect`/`CellRect`/
`PanelClientRect`/`FooterBarRect`/`HeaderRect`/`SegmentRect`/`MenuBarRect`/`MenuButtonRect`/
`FooterRect`/`ButtonRect`/`TabStripRect`/`KitBox`…) plus a *second grammar* on the VST side
(`editor_geometry`'s `Rect` is LTRB with `left/top/right/bottom` + `height()`). The right tool is
one concrete `ui::Rect` + `contains()` with per-role type aliases (`using ButtonRect = ui::Rect;`)
so call sites keep their semantic names — Q-W1's "one `ui::` owner" note already points here; this
finding extends it: (a) retire the XYWH-vs-LTRB fork by picking one grammar (LTRB has the live
`contains`/`height` users; either works — pick once), and (b) the per-type `contains`/`hitTest*`
one-liners collapse for free. A template rect would model nothing — the types differ in name only.
**Watch:** cross-lib name collisions (extension `Rect` vs vst `Rect`) surface only when both headers
meet in one TU — `sample_map` and the editor are exactly such TUs; the Q-4 sub-namespaces are the fix.
**Severity:** medium. **Disposition:** ride Q-W1 (it is the settled `ui::` unification, widened to
include `editor_geometry::Rect`).
**T4-22 — Linear rect-scan hit-tests: small template, real but modest.**
`hitTestCell` (`bank_grid`), `hitTestSlot` (`card_drag`), and the tab/segment scans are the same
first-rect-containing-point loop over records that carry a rect plus extra fields (`SlotCellRect`
adds `slot`). After T4-21, a single `template <class R> int hitIndex(int px, int py,
span<const R>)` (requiring `r.rect.contains(px,py)` or a rect accessor) collapses them. Earns its
keep only if T4-21 lands first; alone it would be a forced template.
**Severity:** low. **Disposition:** document-and-defer; opportunistic rider on Q-W1.
**T4-23 — WAV build/parse consolidation (dedup, not template).**
`buildFloat32Wav` (ingest, 116–179) hand-writes the float32 header that `wav_trim` hand-parses and
`capture_paths`/`capture_realtime` chunk-scan/byte-patch. One pure `wav_codec` (or fold build into
`wav_trim`, renamed) gives one tested owner of the RIFF layout. Concrete functions; nothing to
template. **Severity:** low-medium. **Disposition:** fix-now-sized, but assign to the wave that
opens `ingest.cpp` (T4-10) to avoid a standalone churn commit.
**T4-24 — `clamp01`: dedup with one inline, anti-template.**
Six verified copies (`envelope_overlay`, `master_gain`, `param_slider`, `reasampler_editor`,
`velocity_curve` + `envelope_edit`'s `clamp`). One `constexpr inline double clamp01(double)` in a
shared core header (or just `std::clamp` at call sites). Not a template candidate — `std::clamp`
already is one. **Severity:** trivial. **Disposition:** rider on Q-W1 relocation.
**T4-25 — JSON `Parser`/`ObjWriter`/`writeEscaped`/`intToStr` ×4 — already owned by Q-W1;
confirmed still accurate** (verified in `bank_model`/`bank_book`/`view_mode_model`/
`owned_manifest`; `sample_usage` uses its own `rsusage` k/v wire, *not* a fifth JSON parser — no
scope growth). Concrete class, not a template. **Disposition:** no change.
---
## 4. Indirection audit (heuristic c)
**T4-26 — `ICaptureBackend` is now a dead abstraction: one implementation, zero polymorphic call
sites. The brief's "two implementations — earning its keep" assumption is FALSE at current state.**
Verified: `capture.h` itself documents (lines 139–148, the "SEAM CHOICE" comment) that
`RealtimeRecordBackend` **deliberately does not implement** `ICaptureBackend` — it has a bespoke
async `begin/tick/abort` seam. `OfflineRenderBackend` is the sole deriver, and the only
construction site (`main.cpp:738`) instantiates the concrete type; nobody anywhere holds an
`ICaptureBackend*`/`&`. The interface costs a vtable and models nothing.
**Proposal:** delete `ICaptureBackend`; `OfflineRenderBackend` becomes a plain concrete class. Note
CLAUDE.md/CONTEXT still describe the module as "`ICaptureBackend` interface; two backends" — the doc
should be corrected in the same commit. **Severity:** low runtime, medium hygiene (it misleads —
this audit's own brief was misled). **Disposition:** fix in Q-W3 (the wave that rehomes the capture
orchestration and touches every call site).
**T4-27 — Warning to the Q-W2v brief (T4-14): do not split `sampler_core.cpp` along class lines.**
`AdsrEnvelope::tick`/`TriggerEnvelope::amplitudeAt`/`PitchEnvelope::tick` are called per-voice
per-sample from `Voice::advanceFrame`, which is called per-sample from `VoiceEngine::render`.
Same-TU definition is what lets the compiler inline this stack today (no LTO configured). A
by-class TU split converts the hottest inner loop into cross-TU calls — the exact dispatch-stack
blowout heuristic (c) forbids. If a split is ever wanted, the envelopes must move as
header-defined (inline) classes, not to a TU. The engine TU staying whole at 968 is the correct
trade.
**T4-28 — Warning to the Q-W2 brief (reaffirming the plan's own guardrail).** `panel_audition` and
the preview idle path must stay direct call-throughs after the 8-TU split — the plan already says
this; the two *added* TUs (T4-01: `panel_layout`, `panel_drag`) introduce no new risk (layout is
paint-time, drag is input-time), but the split of `onMouseMove` (which calls hover + drag + tooltip)
should keep per-mouse-move work as plain free-function calls, no interface.
**T4-29 — Warning to the processor split (T4-12).** Keep `process()` and any per-block helpers it
calls in one TU. The state/reload/accessor TUs are UI-thread or setup-time — safe to move freely.
The atomic-pointer-swap pattern (`publishBuiltLocked`) must not gain a virtual seam.
**T4-30 — No other gratuitous indirection found (verified, not assumed).** The only extension-side
`virtual` is T4-26. VST-side virtuals are all VST3-SDK-mandated overrides (`SingleComponentEffect`,
`CPluginView`, `IReaperUIEmbedInterface`) — not ours to remove. The layered pure→shell pairs
(`card_drag`→`bank_panel`, `realtime_record`→`capture_realtime`, `drag_out`→`drag_out_win`,
`prune_reconcile`→`persist`) are the load-bearing discipline, not forwarding waste — each layer
adds the decision/side-effect split, and all are direct calls. `bank_panel`'s ~20-function free-API
is a module boundary, not a dispatch chain; Q-W2's header segmentation thins it.
---
## Summary table — every oversize file → proposed seams → owning wave
| File (LOC) | Proposed TUs/headers | Owning wave |
|---|---|---|
| `bank_panel.cpp` (3459) | 8 TUs: render / **layout (new)** / thumbnails / audition / input / **drag (new)** / bank_ops / window | **Q-W2 (reshaped: 6→8 seams)** |
| `vst/reasampler_editor.cpp` (3065) | 8 TUs: session / controls / layout (pure candidate) / paint_sample / paint_browse_zone / input_sample / input_browse_zone / platform | **NEW wave Q-W2v** |
| `main.cpp` (1897) | orchestrator / **batch+recapture (new)** / scope_resolve / realtime_lifecycle / app-entry residue | **Q-W3 (reshaped: 3→4 hoists)** + Q-W6 |
| `vst/reasampler_processor.cpp` (1164) | processor_state / processor_reload / lifecycle+process (whole) | **NEW wave Q-W2v** |
| `bank_book.cpp` (1109) | slot_map / bank_book / JSON→`core/json` | Q-W1 (+slot_map rider) |
| `view_mode_model.cpp` (1049) + `.h` (748) | indexes+model / planners / JSON→`core/json`; header splits likewise | Q-W1 (+planner rider) |
| `actions.cpp` (1016) | design_view_actions / bank_actions / prune_action (unchanged) | Q-W4 (no change) |
| `vst/sample_map.cpp` (970) + `.h` (708) | sample_map (resolution) / component_state_io (codec); header splits likewise | **NEW wave Q-W2v** |
| `vst/sampler_core.cpp` (968) + `.h` (762) | **TU stays whole (hot-path exception, T4-27)**; header → zone_params.h + sampler_core.h | **NEW wave Q-W2v** (header only) |
| `capture_realtime.cpp` (867) | lifecycle / finalize | Q-W3 (rides the Q-9 rename) |
| `persist.cpp` (852) | session / ext_state_io / prune_fs (unchanged) | Q-W5 (no change) |
| `bank_model.cpp` (767) | model / JSON→`core/json` (unchanged) | Q-W1 (no change) |
| `view.cpp` (677) | apply / lanes | defer, or Q-W1 rider |
| `ingest.cpp` (636) | wav helpers→core / import / surfaces | wave owning T4-23 |
**Wave-plan deltas requested of triage:** (1) Q-W2 grows to 8 seams; (2) Q-W3 grows to 4 hoists +
the `ICaptureBackend` deletion; (3) a **new VST god-module wave (Q-W2v)** owns the editor /
processor / sample_map splits + the sampler_core header split — parallel-safe with Q-W2 (zero file
overlap); (4) Q-W1's relocation scope includes the VST pure libs under the placement shape chosen
at the T4-18/T4-19 fork; (5) the `core/wire/bytes.h` LE-codec template (T4-20) lands with
`component_state_io`.
docs/product/bank-package.md
+773
View File
@@ -0,0 +1,773 @@
# Bank package — product notes
Framing, rationale, and design-direction calls behind **Phase Ε — bank export and
import as a single-file package**. The tickable spec lives in `docs/PLAN.md`
(§Phase Ε); the architecture detail will live in `src/core/package/CLAUDE.md` and
`src/shell/package/CLAUDE.md` once those directories exist. This doc holds the
*why* — the user problem, the container choice, the version-compatibility policy
and the reasoning that produced it, the failure-mode table, and what a package
deliberately does not carry.
Status: framed by product-designer (2026-08-02); **all three [Daniel]-class forks
RULED the same day** — Ε-F1 **proprietary container** (`RSBK`), Ε-F2 **import always
lands as a new bank**, with an automatic suffix on a name collision, Ε-F3 **refuse an
import while the tracking ledger is degraded**. See §"Rulings" for the index and the
recorded rationale; each is specified in place in the section that owns it. Nothing in
this doc is open. Everything else below is a product-designer call with its reasoning
stated; contradict it in review with an argument, not a preference.
---
## What it is (and what it is not)
**A bank package is one file that carries one bank — its audio and its index —
out of a project and into another.** Today a bank is per-project by construction:
the audio sits in `<projectDir>/reasampler_bank/` (`core/capture/capture_paths.h`'s
`kBankSubfolder`) and the index that gives that audio meaning lives in the `.rpp`'s
project ext state under the `"reasampler"` namespace (`src/ext_keys.h`'s
`kProjExtBanksKey`). The two travel together with the project and nowhere else.
Export writes both halves into a single `.rsbank` file; import lands them into
another project's bank folder and index.
**It is not a project-transfer feature.** REAPER already moves projects — *Save
project as… with copy of media*, track templates, subprojects. None of them can
carry a ReaSampler bank, because none of them knows the ext-state index exists;
copy the `reasampler_bank/` folder by hand into another project and you get a pile
of `.wav` files with no names, no loop points, no root notes, no tempo stamps, no
tiers, and no lineage. The package exists precisely because **the metadata is the
part that cannot be moved by hand.**
**It is not a preset.** A package carries audio plus bank metadata. It does not
carry ReaSampler 9000's dialed sound — filter, envelopes, splines, loop crossfade,
rate, pitch. That is the instrument's `ComponentState`, and a user who wants the
dialed sound in another project bakes it first (Phase Ξ's resample) and exports the
resulting capture. The package is a *bank*, and the bank has always been the audio,
not the instrument. See "What a package deliberately does not carry" below — this
is the most likely user expectation mismatch in the whole feature, so it is headed
off here rather than discovered in a support thread.
**It is not a re-encode.** Sample bytes leave the source project and arrive at the
destination byte-identical. Frame count, sample rate, bit depth, channel count are
untouched; no trim, no normalize, no mono collapse, no format conversion, no
compression of the audio payload. The package payload is **opaque bytes** to
everything in the export/import path except a hash function. This is the phase's
trust anchor, and it is the direct analogue of the capture pillar's null test.
---
## Why a single file, not a folder copy
The obvious cheap alternative is "copy the bank folder, and write the index into a
sidecar JSON beside it." Rejected, for four reasons, in descending order of weight:
1. **A folder has no place to put its own manifest that a user cannot lose.** The
index is the part that makes the audio a bank. In a folder, the manifest is just
one more file among two hundred `.wav`s — droppable, renamable, editable into
inconsistency, and silently absent after a partial copy. In a single file it is
the header, and the file either has one or is not a package.
2. **Integrity and version tagging need one identity.** "Is this package complete,
and can this build read it?" is answerable in one read of one file's first few
kilobytes. A folder answers it only after enumerating and stat-ing every entry,
and answers "was anything edited since export?" not at all.
3. **The move gesture is one object.** Email it, drop it in shared storage, drop it
on the docked panel. The panel already accepts `WM_DROPFILES` for ingest
(`src/shell/panel/panel_window.cpp` header comment: "WM_DROPFILES -> ingest"), so
a package can ride an affordance that exists.
4. **Atomicity is buyable.** A single file can be written to a temp path and
atomically renamed on success — the precedent the mono collapse already set
(Ψ-W2-T2 landed the collapse "via temp file plus atomic rename"). A half-written
folder looks exactly like a complete one.
The counter-argument for the folder is real and should be recorded: a folder is
inspectable with no tooling. The container ruling below does **not** buy that back —
`RSBK` is opaque without our tool — so the inspectability loss is an accepted cost,
paid deliberately, not an oversight to be corrected later by reaching for ZIP.
---
## The container — a proprietary `RSBK` (Ε-F1, RULED)
**Ruled by Daniel, 2026-08-02: *"proprietary container."*** The package is a
hand-rolled `RSBK` file. ZIP — whether via the vendored MiniZip64 in
`vendor/WDL/WDL/zlib/` or as a hand-written stored-only ZIP *shape* — is rejected and
is not to be revisited inside this phase.
**The shape.** Magic `RSBK`, a fixed little-endian header carrying the two version
fields (§"Version tagging" below), a length-prefixed JSON manifest, then each entry's
payload concatenated in manifest order. Framing overhead is tens of bytes, not
kilobytes.
**What it reuses, rather than invents.** The little-endian byte codec
(`core/wire/bytes.h` — `putLE` / `ByteReader`, called out in `src/core/wire/CLAUDE.md`
as the earned template case) and the hand-rolled JSON layer (`core/json`). Both are
already owned and already tested here.
**Why the ruling went this way.** The load-bearing reason is not effort — it is that
the pure/shell split is this project's central discipline, and `RSBK` is the only
candidate where the **whole codec lands pure** and the shell is a bytes-in/bytes-out
skin. MiniZip's API is path-and-file-handle shaped (`ioapi.h`), so a ZIP codec drags
the filesystem into the layer that discipline keeps free of hosts; a buffer-backed
`zlib_filefunc_def` is possible but fiddly and defeats the "standard format" argument
inside the code even while preserving it on disk. Compression buys almost nothing on
float32 PCM. Writing a correct ZIP central directory by hand was the worst of both —
more code than `RSBK`, the same hardening burden, plus Zip64 and name-encoding edge
cases, and still no compression.
**The two costs, accepted with the ruling.** (1) The package is **opaque without our
tool** — no unzip-and-look support path. (2) We own the hostile-input hardening of our
own parser, to the discipline `bank_model::deserialize` and `parseLedger` already
carry — *error signaled, never UB* (`bank_model.h`'s `BankModel::deserialize`). Both are priced in; a
later "let's make it inspectable" impulse is a new phase's argument, not this one's.
**This was a one-way door and it is now shut** — packages are in users' hands the day
it ships, and a later container change means either a second reader forever or
stranded packages. The version ladder below, not a format swap, is how the format
moves from here.
---
## Version tagging: two questions, and why one number cannot answer both
### The precedent this extends (read from source, 2026-08-02)
The repo already carries **two** versioning mechanisms, and they answer different
questions:
1. **A blob-schema ladder.** `src/core/tracking/origin_ledger.cpp`'s version-ladder
header comment states the
ladder for the `owned_files` blob (v1 legacy path-only, v2
current), pins `constexpr int kLedgerVersion = 2`, and — the load-bearing part —
**reads and validates `"v"`, not merely writes it**: "A version above
`kLedgerVersion` is therefore its own degraded status, never a Loaded ledger"
(the same comment). The parse outcome is a three-way `Ok` / `Malformed` / `FutureVersion`
(`origin_ledger.cpp`'s `ParseOutcome` enum and `parseStored`), deliberately distinguished so the operator gets the right
recovery advice. A *field-vocabulary* gap behaves oppositely: an unrecognized
`OriginKind` integer degrades to `Unknown` rather than failing the parse
(`origin_ledger.cpp`'s `kindFromInt`), because "a vocabulary gap must not halt the prune"
(`src/core/tracking/CLAUDE.md` §"Gotchas").
2. **An app writing-version stamp.** `src/core/version/app_version.h`'s
`WritingVersion` with `PreVersioning` / `Unknown` / `Stamped`, classified by
`classifyWritingVersion`, stamped into project ext state by
`ReaSamplerSession::saveToActiveProject` (`src/shell/persist/ext_state_io.cpp`) using `stampVersion()` (the numeric
triple only, no channel suffix). It is informational: an absent stamp is "not an
error and not a warning" (`app_version.h`'s `WritingVersion` comment, the `PreVersioning` case).
**An observation worth recording, not a defect to fix here:** `BankBook` writes
`"version": 1` into the banks blob (`src/core/model/bank_book_json.cpp`'s `BankBook::serialize`) but its
parser skips the key along with every other unknown one
(`bank_book_json.cpp`'s `parseBook` — `if (!r.skipValue()) return false; // version, or unknown`).
The book's version field is therefore **decorative today** — written, never read,
never gating. The ledger's is the precedent to extend; the book's is the precedent
not to repeat.
### The two questions a package must answer
- **"Can I parse this shape at all?"** — a hard gate. Monotonic integer. This is
`origin_ledger`'s `"v"`.
- **"Who wrote this, so I can tell the user what to open it with?"** — informational,
never a gate. Semver string. This is `app_version`'s stamp.
A package carries **both**, and conflating them is the mistake to avoid. The stamp
alone cannot gate (semver ordering does not track schema shape; a patch release can
change a blob and a minor release can leave it alone). The ladder alone cannot
advise (an integer tells a user nothing about which build to install).
### The refinement: `formatVersion` **and** `minReaderVersion`
A single ladder has one bad property: **every change strands every older reader,
even a purely additive one.** That is not hypothetical here — look at what `Sample`
has actually accumulated: `rootNote` and `loop` (`bank_model.h`'s `Sample::rootNote` / `Sample::loop`,
"additive like `provenance`. Both default cleanly empty"), `captureTimeSigNum` /
`captureTimeSigDenom` (`Sample::captureTimeSigNum` / `Sample::captureTimeSigDenom`, "0/0 means UNSTAMPED"), `channelCount`
(`Sample::channelCount`, "0 = unknown — a pre-field entry"). Every one of those was additive with
a defined absent-value. Under a single ladder, each would have blocked older readers
for no reason.
So the package header carries two integers:
- **`formatVersion`** — what this writer emitted. Monotonic, bumped on any change.
- **`minReaderVersion`** — the oldest reader that can read this package *safely*.
Bumped only when a change is **structural** (a field's meaning changes, a section
is removed, framing changes); left alone when a change is **additive** (a new
optional manifest key, a new `Sample` field with a defined absent-value — exactly
the four listed above).
The reader's rule is one line: **read it iff
`minReaderVersion <= kPackageFormatVersion`.** `formatVersion` is then only for the
message text and the log.
**One change class that looks additive and is not: a new enum value.**
`BankModel::deserialize` *rejects* an out-of-range `SourceMode` or `Tier` rather than
degrading it (`bank_model.cpp`'s `parseSample` — the `sourceMode` and `tier` branches), and every enum a package carries
rides inside the nested `BankModel` blob. So growing either vocabulary is
**structural** and bumps `minReaderVersion` too. This is wider than packages and
predates them: `BankModel::deserialize` is also the live project ext-state parser
(`bank_book_json.cpp`'s `parseBank`), so appending a `SourceMode` value already strands an older
build opening a newer project's `.rpp`. Phase Ε inherits that property; it did not
cause it, and changing it — degrade-to-`Unknown` at those two sites, the way
`BakeStatus` already does — is a change to the model layer, not a package concern. It
leaves the argument above untouched: the four fields that motivated the two-integer
design are *fields*, and `parseSample`'s `skipValue()` fallback
(`bank_model.cpp`), plus the manifest parsers' equivalent at each level, still
carries them forward.
This is a borrowed pattern, not an invention: Matroska's `EBMLVersion` /
`EBMLReadVersion` pair, PDF's catalog `/Version` over the header version, and OOXML's
`mc:Ignorable` markup-compatibility mechanism all separate "what I am" from "what you
must understand to read me." It costs one extra integer and one writer discipline —
*decide honestly whether your change is additive* — and that discipline is exactly
the one `origin_ledger` already enforces on `OriginKind`
(`src/core/tracking/CLAUDE.md` §"Gotchas": "PERSISTED INTEGERS — never renumber, only
append").
### Both directions, concretely
**Direction 1 — newer ReaSampler, older package. Always imports. Never refuses.**
Every reader reads every `minReaderVersion <= kPackageFormatVersion`. Absent manifest
keys take their defined defaults, exactly as `Sample`'s additive fields already do,
and exactly as `origin_ledger` lifts a v1 path-only blob into v2 records with kind
`Unknown` and empty ids (`origin_ledger.cpp`'s version-ladder header comment). Unrecognized manifest keys are
skipped, which is already how every parser in this repo behaves
(`bank_book_json.cpp`'s `parseBook`). Unrecognized enum integers (the manifest's own —
`BankModel`'s nested ones reject) degrade to their defined `Unknown`-equivalent,
never to the numeric default and never to a parse failure —
`bake_wire`'s rule verbatim (`src/core/wire/CLAUDE.md` §"Modules", the `bake_wire` bullet: "an unrecognized value
decodes as `Failed` rather than as the numeric default `Ok`").
**The user sees:** a normal import summary. Optionally a single console line naming
the older writer version. No dialog, no warning, no ceremony — a supported case is
not an incident.
**Direction 2 — older ReaSampler, newer package. Refuses. Whole-package, nothing
written.** `minReaderVersion > kPackageFormatVersion` is a hard stop, before a single
byte is written to the bank folder and before the index is touched. This is exactly
`LedgerStatus::FutureVersion`'s treatment, and for the same reason stated at
`origin_ledger.cpp`'s version-ladder header comment: parsing an unknown shape by old rules "would yield a
plausible-but-partial" result, and a partial bank is worse than no bank.
**The user sees** a message box (`ShowMessageBox`, verified —
`vendor/reaper-sdk/sdk/reaper_plugin_functions.h:6546`,
`int (*ShowMessageBox)(const char* msg, const char* title, int type)`) naming three
things, because any two of them leave the user stuck:
> **Cannot import this bank package.**
> It was written by ReaSampler 1.7.0 and needs package format 3 or newer.
> This build (1.5.2) reads package format 2.
> Nothing was imported. Install ReaSampler 1.7.0 or newer and try again.
The writer's semver is what makes the message *actionable* — "format 3" alone tells a
user nothing they can act on. That is the whole reason both fields exist.
**Refusing is the correct direction to refuse in**, and it is worth saying why
rather than leaving it as taste: the destination project is the user's existing work.
A refusal costs a transfer the user can retry after updating. A best-effort partial
import costs silent data absence inside a project they will keep working in, and they
will not find out which twelve of forty samples were dropped until they need one.
---
## What a package carries
- **The two version fields and the writer's semver**, in the fixed header.
- **An export timestamp** and the **source bank's display name** — informational, and
the default the import prompt pre-fills.
- **One manifest entry per sample**, carrying that `Sample` record in
**`bank_model`'s own serialization, nested verbatim**. This is the
`bank_book_json` precedent applied outward: the book writer "emits the bank
envelope … plus a raw `index` member whose value is the `BankModel` blob verbatim,
so per-bank sample serialization stays owned by `bank_model` and is not duplicated
here" (`bank_book_json.cpp`'s file-header comment). The package does the same, so a future `Sample`
field reaches packages for free and the shape has exactly one owner.
- **Per entry, additionally:** the payload's **bare file name** inside the package,
its byte length, and a whole-file `hashBytes` digest
(`core/capture/wav_codec.h`'s `hashBytes` — FNV-1a 64-bit over raw bytes, 16-char lowercase
hex). Note carefully: `hashBytes`, **not** `hashWavContent`. The latter deliberately
skips non-`fmt `/`data` chunks (`wav_codec.h`'s `hashWavContent`), which is right for dedup
identity and wrong for "did these bytes survive the trip." Both hashes are already
in the codebase; the package needs the raw one for integrity and carries the
`Sample`'s existing `contentHash` for dedup, and they are different fields
answering different questions.
- **The bank's slot map** — display positions (`core/model/slot_map`), already JSON
round-trippable. A bank's arrangement is part of what the user built.
- **The payloads**, byte-exact, in manifest order.
`hashBytes` is FNV-1a — a corruption detector, not a cryptographic checksum. Say so
plainly in the code and in any user-facing wording: it catches truncation, bit rot,
and a mangled transfer. It does not certify provenance, and it is not a defense
against a package deliberately crafted to collide. That is the right level of
guarantee for this feature; overselling it would be the error.
## What a package deliberately does NOT carry
- **Any absolute path. Any path at all.** Entries are **bare file names** — no
directory component, no `..`, no drive letter, no leading separator — validated on
encode *and* on decode. The importer spells the destination path itself, through
the same `capture_paths` arithmetic every capture already uses. This makes the
relative-paths-only precision invariant **structural rather than remembered**:
there is no field in the format capable of expressing an absolute path. It also
closes the archive-traversal ("zip slip") bug class by construction, which is the
one genuinely security-shaped surface this feature has.
- **The origin ledger.** The ledger is *this project's* record of files *it*
created, and it is the authority prune's protected set is computed from
(`src/core/tracking/CLAUDE.md` §"Scope"). Importing foreign ownership records would
assert this project's authority over another project's history. Instead the
importer writes **its own** birth records for the files it lands, at the moment it
lands them, through the one writer (`ReaSamplerSession::recordCreated`,
`src/shell/persist/session.h` — it already takes an `OriginKind`). Without that,
every imported file would be "foreign, therefore never reclaimed"
(`core/tracking/CLAUDE.md` §"Invariants", the "No silent gaps" bullet) and a user's bank folder would grow forever.
- **Live-instance usage records** (`rsusage_*`, `src/ext_keys.h`'s `kProjExtUsageKeyPrefix`). Per-instance
runtime state of a specific project's specific FX instances. Meaningless elsewhere.
- **Project state that is not bank state:** which bank was active, the Design View
mode model (`view_state`), the tail setting, the project GUID, the bank-generation
counter. A package is a bank, not a project.
- **ReaSampler 9000's `ComponentState`.** Stated above; restated here because it is
the expectation most likely to be wrong. The seam is left open, not closed: the
manifest skips unknown keys, so a future `instrumentState` section is a purely
additive change that does not bump `minReaderVersion`. Designing that seam now and
spending it later is the point.
---
## Identity and collision on import
**The import target is settled first, because it frames all four collisions.
Ε-F2, RULED by Daniel, 2026-08-02: *"always lands as a new bank, with an auto suffix
if name collision."*** Every import creates a **new bank** in the destination book.
It never merges into an existing bank, never lands into the pool, never offers a
target picker, and never overwrites. **Merge-into-existing is out of scope for Phase
Ε** — not deferred behind a flag, not a second action shipped later in this phase, not
a checkbox. A user who wants imported samples in an existing bank imports and then
uses the existing move/copy verbs, which already do exactly that and already carry
their own undo.
Four distinct collisions hide under the word "collision," and they need four
different answers.
1. **Sample id.** Ids are minted as `"cap-" + uniqueTag + "-" + fileName`
(`src/shell/capture/capture.cpp`'s `OfflineRenderBackend::capture`) and `"imp-" + …`
(`src/shell/actions/ingest.cpp`'s `importFileIntoActiveBank`) — unique within a project, **not** globally.
Re-importing a package into the project it came from would collide.
**Answer: remint every sample id on import**, under its own prefix, and remap
`Provenance::parentSampleId` (`bank_model.h`'s `Provenance` struct) through the same map — to the
reminted parent if that parent came in the same package, cleared otherwise. A
foreign id never enters the destination index. This also makes "import the same
package twice" a clean, duplicative, correct operation rather than an undefined
one.
2. **File name in the destination bank folder.** **Never overwrite.** Overwriting
would destroy an existing capture, and only prune touches existing bank bytes.
Mint a fresh unique name through the existing `deriveBankPaths` +
unique-tag machinery (`core/capture/capture_paths.h`'s `deriveBankPaths`), automatically, no
prompt, and report the count in the summary.
3. **Content hash.** `BankModel::add` collapses an equal-`contentHash` add onto the
existing entry (`bank_model.h`'s `AddResult::Collapsed`). Desirable — but
if the file was already written to disk before the collapse, it becomes an
instant orphan. **Answer: check the destination bank's `findByHash` BEFORE writing
the payload**; on a hit, skip the write entirely and report "N already present."
This is the one place the import must consult the model before touching the
filesystem, and it is a concrete acceptance criterion rather than an optimization.
4. **Bank display name.** `bank_book` enforces unique display names, trimmed and
case-insensitive ASCII (`src/core/model/CLAUDE.md` §"Invariants", the "Bank identity, movement, dedup" bullet; `createBank`'s own
contract at `bank_book.h` — *"Drums"/"drums"/" Drums " collide, including
against the pool's "Pool"*), so `createBank("Drums")` into a project that already
has "Drums" returns `false` with no mutation. **Answer: an automatic numeric
suffix, specified below.** No prompt, no overwrite, no refusal.
### The auto-suffix rule (Ε-F2, implementation-binding)
The importer picks the destination bank's display name itself. The user is told what
it picked; the user is never asked.
**The seed.** The seed is the package's recorded source bank display name, taken
**verbatim**. If that name is absent, empty, or whitespace-only after the model's own
trim, the seed is the literal `Imported bank`.
**The probe.** Let `seed` be that string and `fold(x)` be `BankBook`'s own uniqueness
key — strip leading/trailing ASCII whitespace, lower-case ASCII letters
(`bank_book.h`'s `BankBook::nameKey`). Take the **first** name in this sequence whose fold is not
already carried by a bank in the destination book:
seed, seed + " 2", seed + " 3", seed + " 4", …
ascending from 2, unbounded. So `"Drums"` into a project already holding `"drums"`
lands as `"Drums 2"`; a third copy lands as `"Drums 3"`.
**Four properties that make this unambiguous, each stated because omitting it lets two
implementations diverge:**
1. **The seed is never re-parsed.** A package named `"Drums 2"` colliding in the
destination lands as `"Drums 2 2"`, **not** `"Drums 3"`. This is deliberate and is
not a defect to fix: a trailing integer cannot be distinguished from a user's own
name (`"Kit 808"` would become `"Kit 2"` under a stripping rule, silently losing
user-authored text). `resample_name::nextIterationName` may increment its tail only
because ` r<N>` carries a marker; a bare integer carries none. Appending is the
safe direction — it never mutates text the user wrote.
2. **The probe fills gaps.** With `"Drums"` and `"Drums 3"` present and `"Drums 2"`
free, the import lands as `"Drums 2"`. First-free-ascending, not
highest-plus-one — the rule is a pure function of the destination's current name
set, so the same package into the same project always produces the same name.
3. **The suffix is derived from the destination, never from the package.** The package
records only its source name. Nothing about a collision is stored in the package,
and re-importing the same package into a different project can produce a different
name. The probe terminates: with `B` banks in the destination, one of the first
`B + 1` candidates is free by pigeonhole, so no cap is needed and none should be
added.
4. **The fold has exactly one home.** `import_plan` must **not** re-implement
`nameKey` — `bank_book.h`'s `BankBook::nameKey` says in as many words that a drifted second copy
would let the uniqueness invariant be violated. The probe therefore runs behind
`BankBook`'s own folding, which means Ε-W2-T2 adds **one additive public `const`
member** to `BankBook` (recommended: `std::string uniqueDisplayName(const
std::string& seed) const`, returning the first free candidate) and calls it. That
one member is the only edit any Ε track makes to `core/model/`.
**What the suffix does NOT touch.** It renames nothing but the new bank's display
name. Sample ids are reminted by collision rule 1 regardless of whether a name
collision occurred, and the two mechanisms are independent. **`Sample` display names
are never suffixed** — two banks may legitimately hold a sample called `"Kick"`, and
`resample_name`'s own contract already states that sample display names are not unique
(`resample_name.h`'s `nextIterationName`). Bank-folder file names are handled by collision rule 2 and
are unaffected by the bank's name. `slot_map` positions ride along unchanged.
**The pool case is guaranteed, not hypothetical.** Exporting the pool is in scope (the
pool is structurally a bank), and the destination's pool always exists and always
carries the protected name `"Pool"`. So a pool export imported anywhere lands as a
**named** bank called `"Pool 2"`. That is correct under the Ε-F2 ruling — import never
lands into the pool — and it should read as intended behaviour in the summary, not as
a glitch.
**What the user sees, and their recovery.** The import summary names the bank it
created, and says so plainly when the name was adjusted:
> Imported 42 samples into a new bank: **Drums 2** (a bank named "Drums" already
> exists in this project).
The recovery path is the existing rename verb — one Ctrl-Z undoes the whole import
including the bank creation, and a rename is one gesture if the user wants a different
name. Neither needs a new affordance.
---
## Failure modes and what the user sees
Whole-package, all-or-nothing on both sides. The reasoning is the same one prune
settled on: report before acting, and never leave a half-state that looks whole.
| Failure | Side | Behaviour | What the user sees |
|---|---|---|---|
| An indexed file is missing on disk | export | Refuse by default; offer "export the N present entries" only behind an explicit confirm that lists what is missing | Message box naming the missing entries; nothing written unless confirmed |
| An indexed file is unreadable (locked/permission) | export | Same as missing | Same, distinguishing unreadable from absent |
| Destination package file exists | export | Platform save dialog's own overwrite confirm | Native dialog |
| Write fails partway | export | Temp file in the destination directory, atomic rename only on complete success | Console error; no `.rsbank` left behind. A truncated package must never exist |
| `minReaderVersion` above this build | import | Refuse whole. Nothing written, index untouched | The three-part message box above (package needs / this build reads / what to install) |
| Malformed or truncated container | import | Refuse whole. Reported **distinctly from** the version case | "This file is not a readable bank package (corrupt or truncated)." The distinction matters: the two have opposite recoveries — one is "install a newer build," the other is "get an intact copy." `origin_ledger.cpp`'s `parseStored` makes exactly this distinction for exactly this reason |
| Entry name contains a path separator, `..`, or is absolute | import | Refuse whole, before any write | "This package is not well-formed." Hostile input, not user error — no need to elaborate |
| Payload hash mismatch on any entry | import | Refuse whole, before landing anything | "This bank package is damaged (entry `<name>` failed its integrity check). Nothing was imported." |
| A write fails mid-import (disk full, permission) | import | Roll back: delete the files **this import wrote** and abandon the index mutation | "Import failed and was rolled back. Nothing was added." |
| Bank name collides in the destination | import | Auto-suffix, no prompt, no overwrite — first free of `seed`, `seed 2`, `seed 3`, … | Summary names the bank it created and says the name was adjusted |
| File name collides in the bank folder | import | Auto-rename, no prompt | Counted in the summary line only |
| Sample already present by content hash | import | Skip the write, collapse onto the existing entry | Counted in the summary line ("N already present") |
| Tracking ledger degraded at import time | import | **Refuse whole**, before the picker's bytes are read and before any write — the guard runs first | The two-case message below, mirroring prune's abort |
**On the rollback, and why it is not an invariant breach.** Prune is the single
exclusive file-deletion authority, with exactly one carve-out, stated in one place —
`src/shell/persist/prune_fs.cpp`'s file-header comment: "a shell removing a file it wrote itself
moments earlier and that no index ever referenced is self-cleanup, not authority
over user data … the discriminator is 'did this call create it, and did anything ever
reference it', not where it sits." An import rollback fits that discriminator
exactly: the files were written by this call, and the index mutation is abandoned, so
nothing ever referenced them. The spec must **cite** the carve-out rather than
restate it, or a reviewer will correctly read the rollback as a breach.
**On undo.** The index side of an import is one Ctrl-Z, through the same
`persistBankOp` undo batching every bank verb already uses
(`src/shell/bank_ops/CLAUDE.md` §"Invariants", the "One bank operation is one Ctrl-Z" bullet; `Undo_BeginBlock2` / `Undo_EndBlock2` verified
at `reaper_plugin_functions.h:7758` and `:7806`). **Undo does not un-write the
files** — they remain on disk, referenced by no index, until a prune reclaims them.
That is the same designed orphaned-until-prune window a non-empty bank delete already
produces (`src/core/model/CLAUDE.md` §"Invariants", the "Bank identity, movement, dedup" bullet). Say it out loud in the spec; do not let
a user infer that Ctrl-Z cleans the folder.
### Import under a degraded tracking ledger (Ε-F3, RULED: refuse)
**Ruled by Daniel, 2026-08-02: *"refuse mismatched import."*** An import that cannot be
cleanly reconciled against the tracking ledger is **refused outright**. There is no
confirm-and-proceed path, no "I understand the risk" checkbox, and no preference to
turn the guard off. This ruling went against the framing recommendation, and the
reasoning that carried it is recorded below rather than re-argued.
**The trigger, exactly.** The guard fires when `tracking::ledgerDegraded(status)` holds
for the project's loaded ledger status — that is, `LedgerStatus::Unreadable` or
`LedgerStatus::FutureVersion` (`src/core/tracking/origin_ledger.h`'s `LedgerStatus` and `ledgerDegraded`).
`Fresh` (absent key — a legitimate new project) and `Loaded` both proceed normally.
**Two things the guard is deliberately NOT keyed on:**
- **Not `PruneReport::blockedByTracking`.** That flag also fires on unreadable
`rsusage_*` keys, which are about live-instance protection during a *deletion*.
Import deletes nothing and computes no protected set; it *writes* birth records. An
undecodable usage key must not block an import, and reusing prune's composite flag
would silently make it do so.
- **Not the package.** Nothing in the `.rsbank` participates in this check. The package
is untouched by a refusal and remains importable later, elsewhere, or after the
project is repaired.
**When it runs.** First — **before the file picker opens**, before a byte of the
package is read, before any allocation. Making the user find and pick a file we have
already decided to refuse is the wrong order.
**What the user sees.** A console block through `ShowConsoleMsg`, mirroring prune's
abort (`src/shell/actions/prune_action.cpp`'s `doBankPruneFolder` — the `blockedByTracking` console block) in structure and in tone, because a
user who has hit prune's block should recognise this one. Every recovery line names
**this build's** ext-state namespace via `version::extStateNamespace()` — the
beta/stable trap prune already documents, where a beta user handed the stable spelling
clears the wrong key and is still blocked. Two cases, exactly one of which fires:
*Malformed ledger:*
> ReaSampler import: ABORTED — the file-tracking ledger could not be read. Nothing was
> imported.
> The stored file-tracking ledger is malformed. It has been left intact rather than
> overwritten, so it can be repaired or cleared:
> `reaper.SetProjExtState(0, "reasampler", "owned_files", "")`
> Clearing it makes every existing bank file un-reclaimable (they stop being
> attributable to ReaSampler); no file is lost. Reopen the project afterwards — the
> block is held for the rest of this session.
> An import can land hundreds of files in one gesture. With no readable ledger, none of
> them could be given a birth record, and every one would be permanently unreclaimable.
*Ledger from a newer build:*
> ReaSampler import: ABORTED — the file-tracking ledger could not be read. Nothing was
> imported.
> The stored file-tracking ledger was written by a NEWER version of ReaSampler than
> this one, so its records cannot be read safely. It has been left intact and will NOT
> be overwritten. Reopen the project with that newer version — do NOT clear this key
> from here, that would discard tracking records this build cannot see. The block is
> held for the rest of this session.
> An import can land hundreds of files in one gesture. With no readable ledger, none of
> them could be given a birth record, and every one would be permanently unreclaimable.
**The recovery path.** The status is written only by `loadFromProject`, so it is sticky
for the session (`src/shell/persist/CLAUDE.md` §"Invariants", the "A ledger this build cannot read is degraded" bullet): repair or clear the key
(malformed case only), or install the newer build (future-version case), **reopen the
project**, then import again. The package needs no re-export, and nothing about the
destination project was changed by the refusal.
**Export is NOT gated on the ledger, and that asymmetry is intentional.** Export writes
no birth records, mutates nothing, and touches no ext state. A user whose ledger is
degraded can still get their bank *out* — which is exactly the moment they are most
likely to want to. Only the landing side refuses.
**Why the ruling went this way.** The rejected option — allow the import behind an
up-front confirm — matched the accepted residual already stated at
`core/tracking/CLAUDE.md` §"Invariants" (the "No silent gaps" bullet), where a capture made during a degraded session is
recorded in memory but not persisted and degrades to foreign. The argument that carried
is **scale**: that residual contemplates *one* untracked capture, and a bulk import can
strand two hundred files in a single gesture. Same mechanism, different animal. A
confirm would also push a data-lifecycle consequence onto the user at the one moment
they are least equipped to evaluate it — mid-transfer, wanting the samples. The refusal
costs a retry after a project reload; the confirm costs a bank folder that can never be
reclaimed.
---
## Memory: the streaming seam that keeps the codec pure
A bank is not small. Float32 stereo at 48 kHz is ~23 MB per minute; a two-hundred-
sample bank is plausibly gigabytes. **The naive shape — a pure
`encodePackage(vector<uint8_t>) -> vector<uint8_t>` — holds the whole bank twice in
RAM and is unshippable.** The temptation is then to move the codec into the shell so
it can stream. That is the wrong correction, and the right one is a better seam:
- **Pure owns framing and arithmetic.** `encodeHeader(manifest) -> bytes` and
`entryLayout(manifest) -> [{ name, offset, length }]` on the write side;
`decodeHeader(prefix bytes) -> manifest + entry layout` on the read side. Offsets
and lengths are arithmetic — perfectly pure, perfectly testable, and the exact
place an off-by-one becomes a corrupt package.
- **Shell owns the stream.** It writes the header, then appends payloads one at a
time, reading each source file into a buffer, hashing it, writing it, and releasing
it. On decode it reads the prefix, gets the layout, then seeks and streams each
payload independently.
**Constraint, stated as an acceptance criterion:** the export and import paths hold
**at most one entry's payload** in memory at a time. This is what keeps the codec
pure without making the feature fail on real banks, and it is the kind of thing that
is cheap to design in and expensive to retrofit.
**One honest cost.** Export and import are synchronous, on the UI thread, like every
other action in the tool, and prune sets that precedent (a scan-then-confirm gesture
that blocks). A multi-gigabyte bank will therefore freeze REAPER for seconds. The
recommendation is to ship synchronous with a console progress/summary line and treat
async as a later move if it bites — but this is a real `[propose]`-class call the
implementation review should make deliberately rather than by default.
---
## Where it lives (pure / shell)
Two new directories, following the split the whole repo turns on.
**`src/core/package/` — pure, REAPER-free, unit-tested without a DAW.**
- `package_format` — the container framing and the version ladder in one place:
the magic, the header layout, `kPackageFormatVersion`, `kPackageMinReaderVersion`,
and `classifyPackageVersion(formatVersion, minReader) -> Readable | TooNew |
Malformed`. The ladder lives with the framing because the ladder *is* the framing's
contract, and it gets a header-comment ladder written the way
`origin_ledger.cpp`'s version-ladder header comment writes one.
- `package_manifest` — the manifest model and its JSON codec, nesting `BankModel`'s
own blob verbatim.
- `bank_package` — header encode / prefix decode / entry layout, composing the two
above. Never holds a payload.
- `export_plan` — the pure export decision: which entries, what names, what is
missing, and therefore whether the export may proceed.
- `import_plan` — the pure import decision: the id remap table, the parent remap, the
per-entry write / skip-already-present / rename-to-avoid-collision disposition, and
the destination bank name after uniqueness folding. **This module is why the whole
feature is testable without a DAW** — every collision rule above is a pure function
over strings and hashes.
`export_plan` and `import_plan` are separate TUs deliberately, not one `package_plan`:
they share only the manifest type, and separating them is what lets the two Phase Ε
build tracks run in parallel without fighting over a file. The seam is a
responsibility seam, which is what the structural heuristic asks for.
**`src/shell/package/` — filesystem and REAPER-facing.**
- `package_io` — read a package file to bytes, write bytes through temp + atomic
rename, read a bank file's bytes, write a landed file, enumerate existing bank-folder
names, and execute the rollback delete (citing the `prune_fs` carve-out).
- The file picker, which is REAPER's own on every platform — no `#ifdef _WIN32` /
`#else swell/swell.h` split, no Win32 `GetSaveFileNameW`, no wide-char round trip.
**Verified:** `GetUserFileName(int mode, const char* caption, const char*
initial_file_or_path, const char* extension_list, char* fnOutNeedBig, int
fnOutNeedBig_sz)` — `reaper_plugin_functions.h:3790`, documented at `:3788` — serves
both verbs symmetrically: `mode=0` chooses a new file (export's destination),
`mode=1` an existing one (import's source). `extension_list` takes the
`'ReaSampler banks|*.rsbank|All files|*.*'` form. `GetUserFileNameForRead` is
explicitly "Superseded, see GetUserFileName" (`:3796`) and is not used. No fallback
is needed: `src/app/main.cpp`'s `#define REAPERAPI_IMPLEMENT` appears without
`REAPERAPI_MINIMAL`, so the resolver walks the full table (`GetUserFileName` at
`:9084`), and `REAPER_PLUGIN_ENTRYPOINT`'s `REAPERAPI_LoadAPI` check refuses to load the extension if any one function
fails to resolve — so no REAPER build that loads us can lack it.
- `export_bank` / `import_bank` — the promptless verbs, mirroring
`src/shell/bank_ops/`'s pattern exactly: take a `ReaSamplerSession&`, do the work,
return an outcome, **no prompts and no message boxes**. The bindable action and the
panel menu item are then thin skins over one verb apiece, so the logic has one home
(`src/shell/bank_ops/CLAUDE.md` §"Scope").
**The dependency-shape criterion, stated because the brief demands it.** The pure
planners take **explicit value inputs** — the decoded manifest, the destination
`BankBook`, the set of file names present in the bank folder — never a session handle,
never a service container, never a "pass me the thing that has everything." The shell
*gathers*; the core *decides*. That is the same shape `src/shell/persist/CLAUDE.md` §"Scope"
already states ("it gathers rather than decides"). If a circular dependency shows up
during the build, the fix is a service split or a thin interface at the seam — never
threading an extra parameter through a chain of constructors, and never handing a
container down. A base class that grows a dependency must not grow its subclasses'
constructors.
---
## Invariant reconciliation
- **Relative paths only.** Strengthened, not merely preserved: the package format has
no field capable of expressing a path, only a bare file name, validated at both
ends. The destination path is spelled by `capture_paths` on the importing side.
- **Capture and placement are separate acts.** Import writes files and index entries.
It places **no** timeline item, ever — the same rule capture has always carried
(root `CLAUDE.md`, "The load-bearing principle"). A user who wants the imported
audio in the arrange uses the existing insert action.
- **Prune is the single exclusive file-deletion authority.** Unchanged. The one
rollback path is the documented self-cleanup carve-out, cited not restated.
- **No lossy transforms.** The payload is opaque bytes on both sides. `wav_codec` is
invoked on it only to hash and to read metadata already recorded — never to rebuild,
trim, normalize, or collapse. The mono collapse in particular is a **capture-path**
behaviour and must not reach the import path, for the same reason ingest is already
excluded from it (root `CLAUDE.md`, exact-bounds invariant: "ingest is excluded,
because an imported file is the user's bytes, not our capture"). A package's bytes
are someone else's capture; the same exclusion applies with the same reasoning.
- **Bit-identical round-trip.** Export → import → export yields byte-identical
payloads. This is the phase's trust anchor and belongs in the acceptance criteria of
the round-trip track, tested against frozen fixture bytes rather than against a
freshly-generated pair.
- **Bank generation.** Import mutates bank content that live ReaSampler 9000
instances may play, so it must `bumpBankGeneration()`
(`src/shell/persist/session.h`'s `ReaSamplerSession::bumpBankGeneration`, whose own comment says call sites "err toward
bumping"). Export mutates nothing and must bump nothing, write no ext state, and
open no undo point.
- **Beta/stable channel isolation.** Packages are channel-**agnostic** and this is
deliberate. Channel isolation exists so a beta cannot rewrite a stable project's
ext state (`app_version.h`'s `extStateNamespace` — the ISOLATION comment); a package is a file the user moves by hand, not
ambient project state, so there is no isolation property to preserve. A beta build
and a stable build at the same package format read each other's packages, and that
is the useful behaviour. The version ladder — not the channel — is what gates.
---
## Rulings — Daniel's, 2026-08-02
All three [Daniel]-class forks this doc opened were ruled the same day it was framed.
Nothing here is open. This section is an index; each ruling is **specified** in the
section that owns it, and that section is the implementation-binding text.
| Fork | Ruling | Specified in |
|---|---|---|
| **Ε-F1** | **Proprietary container.** Hand-rolled `RSBK`. ZIP via the vendored MiniZip64, and a hand-written stored-only ZIP shape, are both rejected | §"The container" |
| **Ε-F2** | **Import always lands as a new bank**, with an automatic numeric suffix on a display-name collision. Merge-into-existing is out of scope for this phase | §"Identity and collision on import" — the frame, plus the auto-suffix rule |
| **Ε-F3** | **Refuse** an import while the tracking ledger is degraded. No confirm-and-proceed path | §"Import under a degraded tracking ledger" |
**Two of the three went to a different answer than the framing recommended, and the
reasons are worth keeping.** Ε-F2's recommendation was a *prompt* pre-filled with a
uniqueness-folded suggestion; the ruling removed the prompt entirely, which is the
better shape — the name is derived deterministically from the destination, the user is
told rather than asked, and the existing rename verb is the recovery. Ε-F3's
recommendation was allow-with-confirm; the ruling refused, and the counter-argument
raised alongside that recommendation is what carried it (scale — the accepted residual
contemplates one untracked capture, an import strands hundreds).
---
## Implementation decisions — Ε-W2-T1
Not [Daniel]-class forks — both were `[propose at review]` calls in `docs/PLAN.md`'s
Ε-W2-T1 track, answered at implementation review rather than by Daniel, and recorded
here per this phase's own convention for keeping such answers where the design lives
rather than only in the track's own now-stale open-questions line.
- **Affordance: both the bindable action and the panel row.** The action targets the
**active** bank and is the only spelling that can reach the **pool** (the panel's
`showTabMenu` returns early on `isPool()` — a named-bank-tab context menu has no tab
to right-click for the pool), while the exported unit's own definition above includes
the pool. The panel row is the direct gesture on a specific named bank. Neither
subsumes the other.
- **Default file name: the bank's display name**, sanitized through
`capture_paths::sanitizeStem`, seeded into `<projectDir>/<stem>.rsbank`. A
project-derived name was the rejected alternative: three banks exported from one
project must produce three distinguishable files, and a project-derived name
collides on the second export. Known wart, worth recording rather than hiding:
`sanitizeStem` collapses an all-non-ASCII display name to the literal `capture`, so
two such banks still collide — the existing rename verb is the recovery, same as the
import-side auto-suffix collisions above.
---
## Non-goals and guardrails
- **No auto-insertion of imported audio into the arrange.** Same rule as capture.
- **No overwrite of an existing bank-folder file, ever.** Auto-rename instead.
- **No partial import.** All-or-nothing, with rollback. A partially-imported bank is
the failure mode this whole design is shaped to avoid.
- **No re-encode, no trim, no normalize, no mono collapse on either side.**
- **No compression of the audio payload.** `RSBK` concatenates payload bytes; there is
no compressor in the path and none is to be added.
- **No merge-into-existing import.** Every import creates a new bank (Ε-F2). There is
no target picker, no "import into the active bank" variant, and no second action.
Move/copy already move samples between banks after the fact.
- **No instrument state in the package** — the seam is left additive, deliberately
unspent.
- **No whole-book export in this phase.** One package carries one bank, because that
is the unit users think in. A future multi-bank package is an additive manifest
change that does **not** bump `minReaderVersion`, so the option is preserved by
construction rather than by promise. Do not build it now.
- **Do not make the package a sync mechanism.** No "re-import to update," no
reconciliation against a previously-imported package, no package identity tracked
in project state. Import is a one-way copy-in. Anything else is a different product.
docs/product/capture-tail.md
+42 -31
View File
@@ -1,19 +1,20 @@
# Capture tail — spec
Authoritative spec for the **capture-tail** feature: preserving reverb/release
tails that decay past the end of a capture range. The tickable milestone lives in
`PLAN.md` (Milestone T); this doc holds the full technical detail **and** the
product framing.
tails that decay past the end of a capture range. The tickable milestone's landed
history is in `docs/ARCHIVE.md` (Milestone T); this doc holds the full technical
detail **and** the product framing.
> **Why this doc carries the technical spec (not `CONTEXT.md`).** Every other
> pillar (capture M0–M11, Design View, Multi-bank) keeps its authoritative
> technical spec as a `CONTEXT.md §` section and its *why* in a `docs/product/`
> note. Capture-tail is a rider on the already-shipped offline-render path
> (M3/M7), not a standalone pillar, and it is being specced without reopening
> `CONTEXT.md`. So the authoritative detail lands **here**, house-styled to match
> the CONTEXT specs; when the tail work lands, doc-keeper may fold the invariant
> deltas into `CONTEXT.md §Precision invariants` as landed history. Same standing
> discipline applies: **verify every REAPER API name/flag against
> **Why this doc carries the technical spec (not the architecture docs).** Every
> other pillar (capture M0–M11, Design View, Multi-bank) keeps its authoritative
> technical spec as a per-directory `src/**/CLAUDE.md` section and its *why* in a
> `docs/product/` note. Capture-tail is a rider on the already-shipped
> offline-render path (M3/M7), not a standalone pillar, and it was specced without
> reopening the architecture spec. So the authoritative detail lands **here**,
> house-styled to match those specs; the landed invariant deltas are folded into
> root `CLAUDE.md` §Precision invariants and `src/core/capture/CLAUDE.md` /
> `src/shell/capture/CLAUDE.md` as landed history. Same standing discipline
> applies: **verify every REAPER API name/flag against
> `vendor/reaper-sdk/sdk/reaper_plugin_functions.h` before use** — the flag values
> below are transcribed from that header (line numbers cited) and are not guesses.
@@ -52,12 +53,20 @@ snapshot/restore, forces dither and all normalize-postprocessing off, and render
32-bit float. The tail wires into that existing path — no new render trigger, no
new backend.
### Bounds are always custom — so the tail bit is always `&1`
### Bounds are always the time selection — so the tail bit is always `&4`
The backend renders with `RENDER_BOUNDSFLAG = 0` (custom time bounds) for **every**
scope and every range type: it sets `RENDER_STARTPOS` / `RENDER_ENDPOS` explicitly
from the request's exact seconds (`capture.cpp` ~L352–354). It does **not** use the
time-selection / selected-items / regions bounds modes.
The backend renders with `RENDER_BOUNDSFLAG = 2` (time selection) for **every**
scope and every range type: it writes the request's exact seconds into the
project's own time selection via `GetSet_LoopTimeRange` (`capture.cpp` ~L470–477;
`RENDER_STARTPOS`/`RENDER_ENDPOS` are also written, as a defensive no-op for a
mode-0-only field, but the window itself travels in the time selection). It does
**not** use the custom-time-bounds mode (`RENDER_BOUNDSFLAG = 0`) — that mode was
tried and retired: DAW observation showed REAPER resolving a custom-bounds window
on a whole-millisecond grid AT RENDER TIME, flooring the end and rendering exactly
the floored frame count, which silently broke the exact-bounds precision
invariant. The time-selection mode does not floor the window. (The one narrative
home for that finding is `render_settings.h`'s `kRenderBoundsTimeSelection`; this
doc points there rather than retelling it.)
`RENDER_TAILFLAG` is a bitmask keyed to the **bounds mode**, not the capture range
type (header line 3047):
@@ -68,18 +77,20 @@ RENDER_TAILFLAG : &1=custom time bounds, &2=entire project, &4=time selection,
&32=selected project markers/regions
```
Because we always render in custom-time-bounds mode, **the only tail bit that ever
applies is `&1`**. There is no per-range-type tail-flag decision to make — a razor
capture, a time-selection capture, and an item capture are all custom-bounds
renders under the hood, so all three take `RENDER_TAILFLAG = 1`.
Because we always render in time-selection mode, **the only tail bit that ever
applies is `&4`**. There is no per-range-type tail-flag decision to make — a razor
capture, a time-selection capture, and an item capture are all time-selection-bounds
renders under the hood, so all three take `RENDER_TAILFLAG = 4`.
> **Correction to the framing brief.** The brief asked us to pick a
> `RENDER_TAILFLAG` bit *per capture range type* (time selection vs. razor vs. item)
> and flagged `&32` as "markers/regions." The header (line 3047) says `&32` =
> *selected project regions* and `&8` = *all markers/regions* — but neither matters:
> our renders are all `RENDER_BOUNDSFLAG = 0`, so the tail bit is `&1` unconditionally.
> The existing `kTailFlagCustomBounds = 1.0` constant in `capture.cpp` (~L80) is
> already correct; the field wiring is what's missing.
> our renders are all `RENDER_BOUNDSFLAG = 2`, so the tail bit is `&4` unconditionally.
> The existing `kTailFlagTimeSelection = 4` constant in
> `src/core/capture/render_settings.h` (the bounds mode's own bit, per bounds mode —
> header line 3047) is already correct — it was right from the start; the wording
> above it (which had assumed a custom-bounds render) was what was wrong.
### Mode 1 — Automatic (default): generous tail + auto-trim to -72 dB
@@ -87,7 +98,7 @@ Set, in addition to the exact `STARTPOS`/`ENDPOS` already driven:
| Setting | Value | Meaning / header ref |
|---|---|---|
| `RENDER_TAILFLAG` | `1` | apply tail for custom time bounds (line 3047, `&1`) |
| `RENDER_TAILFLAG` | `4` | apply tail for time selection (line 3047, `&4`) |
| `RENDER_TAILMS` | `8000` | the 8 s cap, in ms (line 3048) |
| `RENDER_NORMALIZE` | `32768` | **only** the trim-ending-silence bit (line 3051, `&32768`) |
| `RENDER_TRIMEND` | `≈ 0.000251` | -72 dB threshold (line 3062; scaling below) |
@@ -155,7 +166,7 @@ The existing (currently unwired) `CaptureRequest.renderTail` / `tailMs` fields
| Setting | Value |
|---|---|
| `RENDER_TAILFLAG` | `1` |
| `RENDER_TAILFLAG` | `4` |
| `RENDER_TAILMS` | `request.tailMs` (clamped to the 8 s cap — see below) |
| `RENDER_NORMALIZE` | `262144` (`kNormalizeDisableAll`, unchanged) |
| `RENDER_TRIMEND` | not set / irrelevant (trim bit is clear) |
@@ -176,9 +187,9 @@ adds a third state, so the wiring is a small enum, not a bool:
- **None** (default for null-test / verify captures, and the current two-scope
action defaults): `RENDER_TAILFLAG = 0`, `RENDER_TAILMS = 0`, normalize =
disable-all. Exact bounds. Byte-identical to today.
- **Auto** (the new user-facing default for tail-on captures): tailFlag `1`,
- **Auto** (the new user-facing default for tail-on captures): tailFlag `4`,
tailMs `8000`, normalize `32768` (surgical trim), trimEnd `0.00025119`.
- **Manual(ms)**: tailFlag `1`, tailMs `clamp(ms, 8000)`, normalize `262144`
- **Manual(ms)**: tailFlag `4`, tailMs `clamp(ms, 8000)`, normalize `262144`
(disable-all), no trim.
Recommended shape: replace `bool renderTail` with a `TailMode { None, Auto,
@@ -252,7 +263,7 @@ held to bit-identical repeats.
- **Opt-in beyond the region.** The tail only ever adds audio past the range end
when a tail is explicitly requested (Auto or Manual). This is exactly the existing
invariant: *"no added silence unless a tail is explicitly requested"*
(`CONTEXT.md §Precision invariants`, `CLAUDE.md §Exact bounds`). Auto-trim
(`CLAUDE.md §Precision invariants §Exact bounds`). Auto-trim
strengthens it — the tail added is decay, not silence, and the silence past the
decay is trimmed off.
- **The null test uses NO tail.** The null-test / verify capture (M10) and any
@@ -274,8 +285,8 @@ held to bit-identical repeats.
the tail is **the track's own reverb/delay decay**, not the parent bus's. A track
with a reverb plugin captures that reverb's tail; a track feeding a folder reverb
does **not** capture the folder reverb's tail (that send is out of scope — and
note the pre-existing send-isolation caveat in `PLAN.md §Open questions`, which
the tail inherits unchanged, does not worsen). Correct and consistent.
note the pre-existing send-isolation caveat, which the tail inherits
unchanged, does not worsen). Correct and consistent.
- **Item scope:** item/take FX only, self-track + ancestors + master bypassed →
the tail is the **item/take FX decay only**. An item with a take reverb captures
its tail; the track's reverb does not ring into it. Correct.
docs/product/code-organization.md
+24 -22
View File
@@ -9,8 +9,10 @@ subdirectories) **without sacrificing runtime performance**, against a stated qu
>
> Bring the codebase "**into the realm of something I can stand to look at.**"
Its build roadmap lives in **PLAN.md §Phase Q** and its authoritative spec in
**CONTEXT.md §Phase Q**. This doc holds the *why* — the quality bar, the evidence base
Its build roadmap's landed history lives in **`docs/ARCHIVE.md`** ("Phase Q — Quality:
the decision record") and its authoritative spec now lives in root **`CLAUDE.md`**
(§Directory and namespace layout, §Performance guardrails, §Structural heuristics)
plus the per-directory `src/**/CLAUDE.md` files. This doc holds the *why* — the quality bar, the evidence base
(a grep-verified SOLID audit), the target directory/namespace shape grounded in the Vital
reference, and the numbered fork decisions.
@@ -224,25 +226,25 @@ them through the reorg, not to change them:
These are the naming equivalent of the JSON-`Parser` DRY violation — concrete hazards, not taste:
1. **Four hand-rolled `Parser` classes, one name.** `class Parser` is defined **four times** —
`bank_model.cpp:306`, `bank_book.cpp:663`, `owned_manifest.cpp:107`, `view_mode_model.cpp:654`.
`bank_model.cpp`, `bank_book.cpp`, `owned_manifest.cpp`, `view_mode_model.cpp`.
Q-W1 already deletes three of them by extracting `core/json`; the naming rule is that the
survivor is **`json::Parser`** (or a more specific `json::Reader`/`json::Writer` pair — see
Q-8), never a bare `Parser` in flat scope.
2. **`FooterRect` and `ButtonRect` are shared across pure UI modules — and the codebase already
*knows* it.** `struct FooterRect` and `struct ButtonRect` are defined in `prune_button.h`
(lines 32, 46) and **reused** by `footer_bar.h`, which carries an explicit in-file "NAME NOTE"
(`footer_bar.h:27–34`) documenting that `ButtonRect / FooterRect / SegmentRect / ActionBarRect /
and **reused** by `footer_bar.h`, which carries an explicit in-file "NAME NOTE"
(`footer_bar.h`) documenting that `ButtonRect / FooterRect / SegmentRect / ActionBarRect /
KitBox / KitButtonBox` are "already owned in this namespace" and that new types must carry a
`FooterBar*` prefix to avoid collision. That comment is a smell made visible: the flat
`reasampler::` namespace forces every pure-UI author to hand-check for name collisions before
minting a type. This is the single strongest in-codebase argument for the Q-4 sub-namespaces —
under `reasampler::ui` these shared rect types get one clear owner and the hand-checking stops.
3. **`Sample` (`bank_model.h:69`, the bank metadata struct) vs `AudioSample` (the `peaks` float
3. **`Sample` (`bank_model.h`'s `Sample` struct, the bank metadata struct) vs `AudioSample` (the `peaks` float
alias).** Already flagged in §2.4/Q-4; verified — `Sample` is the model record, `AudioSample`
is a raw PCM float. Under `model::Sample` vs `audio::AudioSample` the collision risk is gone,
but the *names* still read oddly side by side (a `Sample` that is metadata, an `AudioSample`
that is one float). Noted; the namespace split is the required fix, a rename is optional (Q-8).
4. **`Selection` (`bank_grid.h:112`) and `CellRect` (`bank_grid.h:23`) are generic names in a
4. **`Selection` (`bank_grid.h`'s `Selection` struct) and `CellRect` (`bank_grid.h`'s `CellRect`) are generic names in a
flat namespace.** `Selection` in particular is the kind of name a newcomer cannot place without
opening the file. `ui::Selection` / `ui::CellRect` resolve it structurally; no rename needed
beyond the namespace.
@@ -253,23 +255,23 @@ Here the names are legal and non-colliding but do not read on one principle —
at" gap:
1. **The model-family suffixes disagree: `_model` vs `_book` vs `Index`.** Verified: the pure model
modules are `bank_model.{h,cpp}` (owning `class BankIndex`, `bank_model.h:132`), `bank_book.{h,cpp}`
(owning `class BankBook`, `bank_book.h:208`), `view_mode_model.{h,cpp}` (owning `class ViewModeModel`,
`view_mode_model.h:376`), `owned_manifest.{h,cpp}` (owning `class OwnedFileManifest`,
`owned_manifest.h:52`). Four modules, four different file↔class naming relationships:
modules are `bank_model.{h,cpp}` (owning `class BankIndex`, `bank_model.h`), `bank_book.{h,cpp}`
(owning `class BankBook`, `bank_book.h`'s `BankBook`), `view_mode_model.{h,cpp}` (owning `class ViewModeModel`,
`view_mode_model.h`'s `ViewModeModel`), `owned_manifest.{h,cpp}` (owning `class OwnedFileManifest`,
`owned_manifest.h`). Four modules, four different file↔class naming relationships:
`bank_model`→`BankIndex` (file says "model," class says "index"), `bank_book`→`BankBook`
(file = class), `view_mode_model`→`ViewModeModel` (file = class), `owned_manifest`→`OwnedFileManifest`
(file ≈ class, but the class adds "File"). The `bank_model`/`BankIndex` mismatch is the worst:
the file name and its primary class name share no word. This is a genuine legibility wart — the
fix is a *rename decision* (Q-8), not something the directory move alone resolves.
2. **The `bank_book` "wraps `bank_model`" relationship is invisible in the names.** `BankBook`
(`bank_book.h:208`) is a registry of `Bank` (`bank_book.h:147`), each wrapping a `BankIndex`
(`bank_model.h:132`). The names `Book` → `Bank` → `Index` do not read as a containment hierarchy;
(`bank_book.h`'s `BankBook`) is a registry of `Bank` (`bank_book.h`'s `Bank` struct), each wrapping a `BankIndex`
(`bank_model.h`). The names `Book` → `Bank` → `Index` do not read as a containment hierarchy;
a reader has to learn it. (Not necessarily worth a rename — "book of banks" is evocative — but
it is the kind of call Q-8 should make deliberately, not by accident.)
3. **`realtime_record.h` (pure) vs `capture_realtime.cpp` (shell) — the word order flips.** Verified:
the pure realtime module is `realtime_record.{h}` (owning `RecordModePlan`/`RecordPhase`/
`RecordTickInputs`, `realtime_record.h:57–173`) while its shell is `capture_realtime.cpp`. So the
`RecordTickInputs`, `core/capture/capture_realtime.h`) while its shell is `capture_realtime.cpp`. So the
pure core is `realtime_record` but the shell is `capture_realtime` — the two halves of one feature
are named on inverted word order (`realtime_record` vs `capture_realtime`). Compare the *clean*
shell-pair convention elsewhere: `drag_out` (pure) ↔ `drag_out_win` (shell) — same stem, suffix
@@ -277,7 +279,7 @@ at" gap:
naming-drift instance in the tree (Q-9).
4. **`capture.{h,cpp}` is the *offline* backend shell, but the name claims all of capture.**
Verified: `capture.h` declares `ICaptureBackend`, `OfflineRenderBackend`, **and**
`RealtimeRecordBackend` (`capture.h:112,124,201`), while the realtime *implementation* lives in
`RealtimeRecordBackend` (`capture.h`'s `OfflineRenderBackend`), while the realtime *implementation* lives in
`capture_realtime.cpp` and its pure planner in `realtime_record.h`. So `capture` is really
"capture interface + offline backend," a fat header (the §2.3 Interface-Segregation concern) whose
name oversells its scope. Its Q-W3 hoist (`capture_orchestrator`/`scope_resolve`) is the moment
@@ -288,11 +290,11 @@ at" gap:
Swept for names a newcomer couldn't decode; the tree is mostly clean here (a credit to it). Two
minor notes:
- **`guid_diff` / `GuidBaseline` (`guid_diff.h:40`)** — "GUID diff" is decodable in context (it
- **`guid_diff` / `GuidBaseline` (`guid_diff.h`'s `GuidBaseline`)** — "GUID diff" is decodable in context (it
diffs the live track/item GUID set between polls) but `GuidBaseline` reads more clearly as "the
previous-poll snapshot" than the module name suggests. Low priority; leave unless its `core/view`
relocation invites it.
- **`MinMax` (`peaks.h:30`), `KitBox` (`component_geometry.h:28`)** — terse but correct and local;
- **`MinMax` (`peaks.h`'s `MinMax`), `KitBox` (`component_geometry.h`'s `KitBox`)** — terse but correct and local;
no change. Named here only to record they were swept and cleared.
### 2b.5 What the naming audit does NOT touch (hard boundary)
@@ -321,10 +323,10 @@ re-namespaced, and split, not carried forward untouched into a tidier tree. "Som
look at" is partly shape (§2/§2b) and partly *functional soundness* (§2c).
Q-W0 is **not executed by product-designer** — this doc *defines the wave and its scope*; the audit
itself is staff-engineer/DSP work. The authoritative wave definition lives in **PLAN.md §Q-W0** and
its spec framing in **CONTEXT.md §"The pre-restructure audit wave (Q-W0)"**; this section is the
evidence-doc framing (the *why* and the smell taxonomy), matching how §2/§2b frame the structural
audits.
itself is staff-engineer/DSP work. The wave's landed history lives in **`docs/ARCHIVE.md`**
("Q-W0 fix-now remediations" and "Phase Q — Quality: the decision record"), and its findings live in
**`docs/product/code-quality-audit.md`**; this section is the evidence-doc framing (the *why* and
the smell taxonomy), matching how §2/§2b frame the structural audits.
### 2c.1 Audit surfaces (the named targets)
@@ -451,7 +453,7 @@ namespace of every header, splitting the four largest TUs). Meanwhile:
- **Phase L** has **L3** (VST editor + embed-strip restyle, gated on Phase S landing on dev)
still to land — it touches the Phase S draw shells (`reasampler_editor` / `reasampler_embed`),
which arrive on dev with Phase S. (L1/L2/L4/L5/L6/L7 have **already landed** — see
`COMPLETED.md`; the once-listed "L2 pending" is stale and has been corrected here.)
`docs/ARCHIVE.md`; the once-listed "L2 pending" is stale and has been corrected here.)
- **D2** is **functionally complete** (D2-W1..W3-B landed; the only open item — a per-track
lane-split panel indicator — is *explicitly deferred*, not a blocking residual). **M9** (slots)
is **abandoned** (Daniel, 2026-07-27) — will not be built. D2 is named in the gate only so a
docs/product/code-quality-audit.md
+379
View File
@@ -0,0 +1,379 @@
# ReaSampler code-quality audit — Q-W0 findings report and triage
Date: 2026-07-28 · Branch: `pq-w0-audit` · Static analysis only; no code changed by the audit.
This is the committed Q-W0 findings report (Q-10 SETTLED: a committed doc beside the SOLID/naming
audit — `docs/product/code-organization.md` §2c.3; deliverable contract landed per `docs/ARCHIVE.md`
§Phase Q). It
synthesizes four parallel audit tracks; the full track notes remain in the tree as appendices and
are the evidence base for every claim here — this report cites finding IDs and does not restate
mechanisms in full:
- **Track 1 — DSP / audio algorithm quality:** [`audit-notes/q-w0-t1-dsp.md`](audit-notes/q-w0-t1-dsp.md) (T1-01…T1-11)
- **Track 2 — architecture smells (functional lens):** [`audit-notes/q-w0-t2-architecture.md`](audit-notes/q-w0-t2-architecture.md) (T2-01…T2-11)
- **Track 3 — env-coupled-constant domain modeling:** [`audit-notes/q-w0-t3-env-constants.md`](audit-notes/q-w0-t3-env-constants.md) (T3-01…T3-07)
- **Track 4 — structural sizing + placement:** [`audit-notes/q-w0-t4-sizing.md`](audit-notes/q-w0-t4-sizing.md) (T4-01…T4-30)
Dispositions below are **proposals**. Per the Q-W0 sign-off gate, Q-W1 does not begin until Daniel
has signed off on every disposition; the open calls are collected in §4.
---
## 1. Verdicts up front
**DSP / pitch engine (the Q-11 question).** The correlation-aligned SOLA in `pitch_shift` is
**sound — no technique replacement (phase-vocoder / WSOLA) is warranted on this evidence** (T1
overall verdict). Track 1 finds the implementation "unusually well-defended" (normalized
correlation, ratio-scaled fades with drain-headroom derivation, prime-with-real-content onset,
frozen-writer tail, filled-span clamping) with RT discipline intact throughout. Every T1 finding
sits on the Q-11 escalation ladder's first rungs — bounded fixes within the existing technique, or
documented operating limits — exactly the settled default. The one High finding (T1-01, stereo
splice decorrelation) is a bounded fix inside the current design (link the per-channel lag
search), not a technique change. Track 1 states plainly that it cannot listen: every artifact is
mechanism + predicted audible consequence, and perceptual materiality is Daniel's call.
**Architecture (functional smells).** The load-bearing boundaries hold: no pure module includes a
host type, the VST bridge is genuinely read-only, WAV *decoding* has exactly one owner, the prune
and exception boundaries audit clean (T2 clean list). What Track 2 found instead is the classic
cost of duplicated *algorithms*: the length-prefixed wire `Cursor` copy-pasted 3× **with
security-hardening drift** — the oldest copy (`provenance`) missing the overflow guards its
siblings gained (T2-01, High, with a cheap Q-W0 backport); a fifth hand-rolled JSON decoder the
§2 audit did not count (T2-02); `readFileBytes` ×5 (T2-03); the ext-state grow-loop ×3 with its
pure decode half-adopted (T2-04); a 19-struct rect zoo (T2-05); and drifting copy-paste in the
capture-stamp epilogue (T2-09). All are dedup/relocation-shaped and route onto the reorg waves;
none is a live user-facing bug except the T2-01 robustness gap.
**Env-coupled constants (the prior-incident category).** The persistence surfaces — the
highest-stakes case — are **clean**: every wall-clock quantity written to disk since the S12
remediation is in seconds or ms, and every persisted frame-domain value is a source-file fact
whose rate travels with it (T3 clean list). Seven findings, only two fix-now: the master-gain
ramp step hard-codes 20 ms × 48 kHz (T3-01) and the Trigger-fade UI ceiling hard-codes
2 s × 44.1 kHz (T3-03) — both live hardcoded-rate residues in `src/`, both trivial, both in files
no then-planned downstream wave opens. The rest are deliberate-and-documented couplings or
recorded legacy residue, plus one systemic usability note (no DPI/content-scale support, T3-05)
that is a future phase of its own.
**Sizing + placement.** The wave plan's four planned splits are necessary but no longer
sufficient: the census measures **9 files needing TU splits and 2 needing header-only splits — 5
of them VST-side, which currently have no owning wave** (T4 §1.5). `reasampler_editor.cpp`
(3,065 LOC) is now the largest unowned file in the repo. Track 4's structural answer is a new
VST god-module wave (**Q-W2v**), reshaped seam lists for Q-W2 (6→8) and Q-W3 (3→4 hoists), one
documented exception (`sampler_core.cpp` stays whole — hot path, T4-14/T4-27), and one dead
abstraction to delete (`ICaptureBackend`, T4-26 — the brief's "two implementations" assumption is
false at current state). The `src/vst/` placement question is a genuine fork for Daniel
(T4-18/T4-19, §4a).
---
## 2. Unified findings register
Every finding from all four tracks, exactly once, with proposed disposition. Severities are the
tracks' own. "Q-W0" as a destination means remediated in this wave before it closes (post
sign-off). Cross-track overlaps are reconciled in §2.5.
### 2.1 Track 1 — DSP (appendix: `q-w0-t1-dsp.md`)
| ID | Finding (one line) | Sev | Proposed disposition | Rationale |
|----|--------------------|-----|----------------------|-----------|
| T1-01 | Stereo Preserve: per-channel independent splice alignment decorrelates L/R (image wander + mono-sum combing on stereo captures) | High | **Fix-now in Q-W0** (bounded SOLA fix: linked lag/schedule across channels) — **Daniel's call, §4b** | Hits the flagship path (Preserve default + permanently stereo bus); standard stereo-SOLA practice; no technique change |
| T1-02 | Ratio slew mid-fade can drain the outgoing tap past the writer (pitch-env attack case) | Med | Document-and-defer; bounded re-cap noted for when the file is next opened | Needs pitch-env + Preserve + steep attack to trigger; constant-ratio case already covered |
| T1-03 | Preserve prime ignores Trigger `playEnd_` bound; zero-pads sub-window samples as declared-valid ring content | Med | **Fix-now in Q-W0** (prime to feedBound + immediate `freezeTail()`) **if Daniel agrees short one-shots matter, else defer with note — §4b** | Small, contained in `Voice::start`; re-uses designed GA3 machinery |
| T1-04 | No sustain-loop crossfade — hard loop seam clicks unless loop points amplitude-matched | Med | Document-and-defer (record beside the zone-loop spec) | A crossfade is a feature (parameter + UI), wrong scope for a reorg phase |
| T1-05 | Linear interpolation + no band-limiting on repitch (both engines) | Low | Document-and-defer (recorded trade-off; cubic Hermite noted as drop-in if ever wanted) | Classic sampler behavior, deterministic and consistent across engines |
| T1-06 | Correlation search: coarse step-4 can mis-lock above ~5 kHz; maxLag bounds alignment to ≥ ~80 Hz | Low | Document-and-defer (record as the engine's stated operating range) | Inherent SOLA range/cost trades; widening costs splice-burst CPU linearly |
| T1-07 | `splice()` up-jump clamp comment contradicts the code (code is exactly tight; comment's margin direction is backwards) | Low | **Fix-now in Q-W0** (comment rewrite, zero behavior change) | Misleads the next maintainer of a safety-critical clamp; one line |
| T1-08 | Linear-in-amplitude ADSR decay/release (constant-dB nowhere; abrupt-late releases) | Low | Document-and-defer | Character-vs-correctness product decision; changing it alters every existing instrument's feel |
| T1-09 | `declickR_` is dead state (blend correctly shares one weight; R is seeded/decayed, never read) | Low | Fix-now-trivial **as a rider on any Q-W0 `sampler_core` edit** (T1-01/T1-03); else defer | Hygiene only, no audio effect; not worth a standalone change |
| T1-10 | `planWavTruncate` silently drops RIFF chunks after `data` (metadata loss on trim) | Low | Document-and-defer (note in the header's FORMAT ASSUMPTION block when next touched) | Metadata-only; preserving trailing chunks complicates the single-truncating-write design for no audio benefit |
| T1-11 | `makeUniqueTag` 1 s resolution → same-second batch captures collide (silent overwrite) | Low-Med | **Fix-now, assigned to Q-W3** (per-session monotonic counter, both call sites); Q-W0 fallback if triage prefers | T1 explicitly routes at triage; Q-W3 is the nearest wave opening the extension capture flow |
### 2.2 Track 2 — architecture (appendix: `q-w0-t2-architecture.md`)
| ID | Finding (one line) | Sev | Proposed disposition | Rationale |
|----|--------------------|-----|----------------------|-----------|
| T2-01 | Wire `Cursor` ×3 with hardening drift — `provenance` lacks the overflow/length guards its siblings have; unbounded `reserve` reachable from persisted input | High | **Fix-now, split:** (a) backport hardened `field()` + count sanity bound to `provenance.cpp` **in Q-W0** (§4c); (b) structural collapse to one shared wire codec **in Q-W1** | Hazard is cheap to close now with existing `provenance_tests`; the dedup should ride the wave already creating `core/` |
| T2-02 | Fifth hand-rolled JSON decoder in `tail_control` (the §2 "4× Parser" undercount) | Med | **Fix-now, folded into Q-W1** — add `tail_control` to the `core/json` consumer list explicitly | Zero extra cost when `core/json` lands; a stray fifth decoder afterward would be a defect of the wave |
| T2-03 | `readFileBytes` hand-rolled ×5 across both artifacts | Med | **Fix-now, folded into Q-W1** — one pure helper in the `core/` utility home; both targets link it | Five copies of a ten-line function; creating its home is exactly Q-W1's job |
| T2-04 | `GetProjExtState` grow-loop ×3; pure `bridge_marshal` decode only half-adopted (`usage_scan`'s copy is prune-safety-adjacent) | Med | **Fix-now, assigned to Q-W5** (the wave that splits `persist.cpp` — T2's own rule; its "Q-W4" label predates the plan's persist=W5 numbering) | Touching persist's session machinery outside its own wave risks the highest-traffic shell for a dedup with no live bug |
| T2-05 | 19 rect structs + ~15 inline point-in-rect predicates across the pure UI family | Med | **Fix-now, folded into Q-W1** — reconciled with T4-21 into one disposition, see §2.5(1) | Same-moment-as-relocation principle; PLAN Q-W1 already owns the `ui::` rect unification |
| T2-06 | Pure-computable layout math stranded in the VST editor shell (~49 inline geometry computations; §2's VST scope gap) | Med | Document-and-defer **with named reshape — satisfied by Q-W2v's `editor_layout` pure-candidate TU** (see §2.5(4), §3) | Behavior-preserving hoist best done under the reorg's test discipline; must be a recorded point or the layer keeps growing |
| T2-07 | Extension links the entire voice engine to serialize one preset blob (codec not separable from engine) | Low | Document-and-defer → **executed by Q-W2v's `component_state_io` split** (same split as T4-13, see §2.5(3)) | Right abstraction, wrong granularity; a module-homing decision the reorg waves exist to make once |
| T2-08 | WAV/RIFF container knowledge in 4 modules / 2 chunk walkers (dedup-by-hash + null-test invariants sit on their agreement) | Low | Document-and-defer → **consolidation moment is a triage question, §4e** (T2 prefers the `core/wav` homing moment; T4-23 prefers the wave that opens `ingest.cpp`) | All four currently correct against each other; pre-reorg consolidation churns the capture hot path for no functional gain |
| T2-09 | Capture backends' Sample-stamping epilogue copy-paste with silent divergences (active-project vs pinned-project time-sig read) | Med | **Fix-now, folded into Q-W3** — extract shared `stampCaptureSample` helper; divergent bits stay in the realtime caller | Q-W3 opens both backend TUs anyway; keeps one review of precision-invariant-adjacent code |
| T2-10 | Thumbnail cache-invalidation drifted across the split (extension: pure generation-baked key; editor: ad-hoc string key + call-site `clear()`s) | Low | Document-and-defer — adopt the pure `ThumbnailKey` on the VST side **as a rider on Q-W2v's editor work** | No live bug; pointless as standalone churn, natural rider on the editor wave |
| T2-11 | ComponentState v1→v11 deserialize chain sound, but v3/v4/v5 legacy branches triplicate the shared read | Low | Document-and-defer, explicitly — record that the next envelope bump (v12) extends the shared path rather than minting another branch | Legacy branches are frozen back-compat contract; rewriting them risks the one thing they must never break |
### 2.3 Track 3 — env-coupled constants (appendix: `q-w0-t3-env-constants.md`)
| ID | Finding (one line) | Sev | Proposed disposition | Rationale |
|----|--------------------|-----|----------------------|-----------|
| T3-01 | Master-gain ramp step is a per-sample constant baking in 20 ms × 48 kHz (`kGainRampRate = 1/960`); FB1 no-zipper contract degrades silently at higher rates | Med | **Fix-now in Q-W0** — store `kGainRampSeconds`, derive step from `sampleRate_` (the file's own `kPreserveWindowMs` pattern) — **§4d** | Trivial, isolated, behavior-identical at 48 kHz; a live violation of the no-hardcoded-rate ruling in a file no then-planned wave opens |
| T3-02 | Takeover-declick decay is a per-frame coefficient (~2× faster at 96 kHz) — documented deliberate in-code | Low | Document-and-defer — triage ratifies the in-code note as the record | Already an explicit, written, bounded design decision; converting buys no audible improvement |
| T3-03 | Trigger-fade UI throw ceiling hardcodes 2 s × 44 100 as `88200.0` frames (knob full-scale varies per source rate) | Low | **Fix-now in Q-W0** — `kFadeMaxSeconds = 2.0` resolved against the loaded source's rate; T3's stated fallback (defer, amend comment) if zero UI-feel change is preferred — **§4d** | Small and contained; storage domain unchanged; the editor already threads `frameCount + rate` through pack/unpack |
| T3-04 | Drop-hint banner duration stored in sync-timer ticks (6 × 500 ms) | Low | Document-and-defer; fold in opportunistically if the file is opened | Cosmetic, self-documenting, cadence and decay live three lines apart |
| T3-05 | Systemic: no DPI/content-scale support in either UI surface (all layout constants are physical px at ~96 DPI) | Med | Document-and-defer — record as a named future phase; Q-W1's geometry relocation keeps constants centralized so the eventual scale factor lands in one place | A proper UI-scaling pass is a feature wave of its own, far outside Q-W0's remediation budget |
| T3-06 | Legacy v3 zone-payload lift divides by the *current* project rate (skewed times if the rate changed since write; write-era rate never recorded) | Low | Document-and-defer — this report is the record; the skew is a known, not a future mystery bug | Unrecoverable in principle; the documented residue of the incident that motivated the seconds invariant |
| T3-07 | SOLA correlation-segment cap of 512 frames — frame-domain by design (CPU bound); wall-clock span halves at 96 kHz | Low | Document-and-defer — **resolved against Track 1's verdict, see §2.5(2)** | T3 judged the frame domain arguably correct for a compute bound and handed the quality call to T1 |
### 2.4 Track 4 — sizing + placement (appendix: `q-w0-t4-sizing.md`)
| ID | Finding (one line) | Sev | Proposed disposition | Rationale |
|----|--------------------|-----|----------------------|-----------|
| T4-01 | `bank_panel.cpp` (3459): the plan's six seams no longer land sub-600 — `panel_render` ~700, `panel_input` ~800 | High | **Fix-now → reshapes Q-W2:** eight TUs, adding `panel_layout` and `panel_drag` | Without the two new seams, two of six TUs ship >600 on day one |
| T4-02 | `main.cpp` (1897): `capture_orchestrator` as specced lands ~885 | High | **Fix-now → reshapes Q-W3:** fourth hoist `capture_batch` (batch family + recapture + selection guards) | Recapture is planner-driven like batch and shares the guard machinery — it belongs with batch |
| T4-03 | `actions.cpp` (1016): plan's seams still land sub-600 | — | No change to Q-W4 (confirmation) | Measured against the current tree |
| T4-04 | `persist.cpp` (852): plan's seams still land sub-600; pS-usage growth landed exactly where the plan isolates it | — | No change to Q-W5 (confirmation) | Measured against the current tree |
| T4-05 | `bank_book.cpp` (1109): `SlotMap` is a self-contained type; post-JSON-extraction remainder splits cleanly | Med | Fix-now, fold into Q-W1 (`slot_map` extraction rides the JSON rewire already opening this file) | One `git mv`-shaped extraction on top of owned work |
| T4-06 | `view_mode_model.cpp` (1049) + `.h` (748): planners separable from model+indexes after JSON extraction | Med | Fix-now, fold into Q-W1 (planner split rides the JSON rewire); T4 allows deferring the planner split if the wave wants to stay minimal (~660 post-extraction is marginal) | JSON rewire opens the file; header splits the same way |
| T4-07 | `bank_model.cpp` (767): model vs JSON — the Q-W1 poster child, ~250 after extraction | — | Already owned by Q-W1; no new seam (confirmation) | — |
| T4-08 | `capture_realtime.cpp` (867): async lifecycle vs file-side finalize are distinct concerns | Low-Med | Fix-now, ride Q-W3 (`capture_realtime_finalize.cpp` split rides the Q-9 naming rider) | Same-wave file surgery is free |
| T4-09 | `view.cpp` (677): park/restore vs D2 lane machinery are separable halves | Low | Document-and-defer unless Q-W1's relocation touches it — then take the free `view_lanes` split | 677 is barely over the bar |
| T4-10 | `ingest.cpp` (636): pure WAV/PCM build helpers trapped in a shell TU | Low-Med | Fix in whichever wave lands the WAV consolidation — **moment is the §4e triage question** (circular with T4-23; no current wave opens `ingest.cpp`) | Extracting the pure WAV build gains a test target and drops the shell to ~500 |
| T4-11 | `vst/reasampler_editor.cpp` (3065): the largest unowned file — the `bank_panel` of the VST artifact | Highest | **Fix-now → new wave Q-W2v:** eight TUs (session / controls / layout / paint ×2 / input ×2 / platform), split axis = the face structure | Grew past `main.cpp` after the plan was written; same god-module profile |
| T4-12 | `vst/reasampler_processor.cpp` (1164): four seams | Med-High | **Fix-now → Q-W2v:** three TUs (`processor_state` / `processor_reload` / lifecycle+`process()` whole) | Partial-class-across-TUs is the same pattern as the Q-W2 panel split |
| T4-13 | `vst/sample_map.cpp` (970) + `.h` (708): resolution core vs binary ComponentState codec | Med-High | **Fix-now → Q-W2v:** split `component_state_io.cpp` + matching header split — one disposition with T2-07, see §2.5(3) | The codec grows every envelope bump (v6→v11 in one quarter); reduces editor/processor rebuild fan-out |
| T4-14 | `vst/sampler_core.cpp` (968) + `.h` (762): TU is a genuine single responsibility on the hottest path | Med | **Fix-now → Q-W2v, header only:** split `zone_params.h` from `sampler_core.h`; **TU stays whole — documented exception to the 600 bar** (record in the wave brief so nobody "fixes" it later) | Same-TU inlining on the per-sample path; no LTO in the build (see T4-27) |
| T4-15 | `view_mode_model.h` (748) | — | Covered under T4-06 (splits with its TU) | — |
| T4-16 | `vst/sample_map.h` (708) | — | Covered under T4-13 | — |
| T4-17 | `vst/sampler_core.h` (762) | — | Covered under T4-14 | — |
| T4-18 | VST placement, leading recommendation: integrate into the one `core/`/`shell/` split with `instrument/` subsystem dirs | — | **Daniel's fork — §4a** (T4 recommends T4-18) | One rule, no special case; the artifact boundary is a link-graph fact the sources already straddle |
| T4-19 | VST placement, alternative: parallel artifact-first subtree (`src/vst/core|shell` behind one SDK-gated `add_subdirectory`) | — | **Daniel's fork — §4a** | Defensible if artifact legibility outweighs discipline uniformity; T4 notes its self-containment is cosmetic |
| T4-20 | Little-endian byte codec hand-rolled ×5 — real template win (`putLE`/`readLE`) | Med | Fix-now, lands with `component_state_io` in Q-W2v (its biggest consumer); other consumers rewire opportunistically — relationship to T2-03/T2-04 noted in §2.5(5) | Compile-time dispatch, zero runtime cost, entirely off hot paths; gives the codec a tested primitive |
| T4-21 | Rect family: unify with one **concrete** `ui::Rect` + `contains()` + per-role aliases — NOT a template; retire the XYWH-vs-LTRB fork | Med | **Fix-now, ride Q-W1** — reconciled with T2-05 into one disposition, see §2.5(1) | The types differ in name only; a template would model nothing; cross-lib `Rect` collision is fixed by the Q-4 sub-namespaces |
| T4-22 | Linear rect-scan hit-tests: one small `hitIndex` template collapses them — only after T4-21 | Low | Document-and-defer; opportunistic rider on Q-W1 once the rect unification lands | Alone it would be a forced template |
| T4-23 | WAV build/parse consolidation into one pure `wav_codec` owner (dedup, not template) | Low-Med | Fix-now-sized, but the owning moment is the **§4e triage question** (T4 assigns it to the wave opening `ingest.cpp`; T2-08 prefers the `core/wav` homing moment; no current wave opens ingest) | Avoid a standalone churn commit; one tested owner of the RIFF layout |
| T4-24 | `clamp01` ×6 — one `constexpr inline` (or `std::clamp` at sites); anti-template | Trivial | Fix-now, rider on Q-W1 relocation | — |
| T4-25 | JSON `Parser` ×4 confirmed still accurate; `sample_usage` is **not** a fifth JSON parser (no scope growth from this track) | — | No change to Q-W1 (confirmation; T2-02's fifth decoder is a different file and does grow the consumer list) | — |
| T4-26 | `ICaptureBackend` is a dead abstraction: one deriver, zero polymorphic call sites; the brief's "two implementations" assumption is FALSE (realtime deliberately has a bespoke seam) | Low (runtime) / Med (hygiene) | **Fix-now, in Q-W3:** delete the interface, `OfflineRenderBackend` becomes concrete; **correct CLAUDE.md/CONTEXT ("ICaptureBackend interface; two backends") in the same commit** | It misleads — this audit's own brief was misled; Q-W3 touches every call site |
| T4-27 | Warning: do **not** split `sampler_core.cpp` along class lines — envelope `tick()`s are per-voice-per-sample; a by-class split is the exact heuristic-(c) dispatch blowout | — | Record as a guardrail in the Q-W2v brief (pairs with T4-14's whole-TU exception) | Same-TU definition is what lets the compiler inline the stack today |
| T4-28 | Warning to Q-W2: audition/preview stays a direct call-through across the 8-TU split; per-mouse-move work stays plain free-function calls | — | Record as a guardrail in the (reshaped) Q-W2 brief — reaffirms the plan's own guardrail; the two added TUs introduce no new risk | — |
| T4-29 | Warning to the processor split: `process()` + per-block helpers stay one TU; the atomic-pointer-swap pattern must not gain a virtual seam | — | Record as a guardrail in the Q-W2v brief | — |
| T4-30 | No other gratuitous indirection found (verified: only extension-side `virtual` is T4-26; VST virtuals are SDK-mandated; layered pure→shell pairs are the discipline, all direct calls) | — | Clean verification — see §5 | — |
### 2.5 Cross-track dedupes and reconciliations
1. **T2-05 ≡ T4-21 (+ T4-22 rider) — the rect zoo. Reconciled into ONE disposition: fix-now,
ride Q-W1.** Both tracks found the same duplication (19 XYWH structs + inline predicates;
T4-21 adds the VST side's second LTRB grammar) and both prescribe the same mechanism — one
concrete `ui::Rect` + `contains()` with per-role aliases, explicitly **not** a template
(T4-21's ruling). The only divergence was the wave label: T2-05 said "Q-W2 (the ui/
relocation wave)", but in the plan the relocation wave — and the settled `ui::` rect
unification (PLAN §Q-W1, "shared pure-UI rect types … get one `ui::` owner") — is **Q-W1**.
T2-05's own rationale ("same-moment-as-relocation") therefore points at Q-W1; reconciled
there. T4-22's hit-test template stays a deferred opportunistic rider behind it.
2. **T3-07 → T1 — the 512-frame correlation cap. Resolved: document-and-defer.** T3 handed the
"is 512 the right number" quality call to Track 1. Track 1's verdict on the correlation
search's bounds (T1-06) is document-and-defer — record the alignment limits as the engine's
stated operating range; "widening either costs splice-burst CPU linearly." Note for accuracy:
T1-06 adjudicates the coarse-step and `maxLag` bounds specifically and does not name the
512-frame `corrFrames_` cap; the resolution here rests on T1's general verdict (bounded
limits recorded, no change recommended) applied to the same search-cost family. If triage
wants the 512 value separately adjudicated, that is a residual question — flagged rather than
silently absorbed.
3. **T2-07 ≡ T4-13 — the ComponentState codec split. One disposition: Q-W2v's
`component_state_io`.** T2-07's complaint (extension links the whole voice engine to share
the preset serializer) is *solved by* T4-13's proposed split; T2-07's link-weight rationale
rides the T4-13 seam. T4-14's `zone_params.h` header split completes the extension-side
decoupling. T2 had provisionally pointed at "Q-W1/Q-W2 module-homing"; with Q-W2v now
proposed as the wave that opens `sample_map`, that is the owning wave.
4. **T2-06 ≡ T4-11's `editor_layout` — the stranded editor layout math.** T2-06's
document-and-defer explicitly demanded a *named* downstream reshape; Q-W2v's `editor_layout`
TU (T4-11, marked "pure candidate") is that reshape. One disposition: assigned to Q-W2v, with
the hoist targeting the existing pure homes (`editor_geometry` is T2's named natural owner).
T2-06's scope note (the §2 god-module catalogue missed the VST side) is also the evidence
base for Q-W2v existing at all.
5. **T4-20 / T2-03 / T2-04 — related but distinct dedup family, three separate dispositions.**
All three converge on shared `core/` utility homes but touch disjoint code: T4-20 (LE byte
codec ×5) lands with `component_state_io` in Q-W2v; T2-03 (`readFileBytes` ×5) lands in
Q-W1's utility home; T2-04 (ext-state grow-loop ×3, generalizing `bridge_marshal`) lands in
Q-W5 with the persist split. Marked here so triage sees them as one family and no wave
assumes another already covered its slice.
6. **T2-08 / T4-23 / T4-10 — WAV/RIFF consolidation. Genuine track disagreement on the moment;
surfaced as §4e** rather than silently picked. T2-08 defers to "the reorg wave that
relocates `wav_trim`" (Q-W1's relocation); T4-23 assigns to "the wave that opens
`ingest.cpp`" — and T4-10 assigns the ingest split to "whichever wave lands the WAV
consolidation," which is circular: **no current wave opens `ingest.cpp`.**
7. **T1-11 — capture-tag collision.** T1 offered it to Track 2 ("Track 2 may claim it");
Track 2 did not. It remains a single T1 finding, routed per T1's own suggestion to Q-W3.
8. **Cross-track interaction on the DSP/VST fix-nows.** T1 and T3 both justified
fix-now-in-Q-W0 partly by "no downstream wave opens these files" — written before T4
proposed Q-W2v, which *does* open `reasampler_processor.cpp` / `reasampler_editor.cpp` /
`sampler_core.h`. The recommendation stands unchanged: Q-W2v is a behavior-preserving
mechanical-split wave, and folding behavior-changing DSP/domain fixes into it would break the
wave discipline (CTest-green mechanical moves, no logic change). Fix-now items stay in Q-W0;
noted so the rationale reads correctly against the reshaped plan.
---
## 3. Plan reshape — what Q-W0 proposes for Q-W1..Q-W6
The concrete deltas to the PLAN §Phase Q wave graph. Every wave is named; "no change"
confirmations included deliberately.
**Q-W0 (this wave, post sign-off) — remediations before close:** T2-01(a) provenance cursor
hardening backport; T3-01 gain-ramp seconds; T3-03 fade-ceiling seconds (or its stated fallback);
T1-07 comment fix; pending §4b — T1-01 linked-lag stereo fix and T1-03 prime bound, with T1-09
riding any `sampler_core` edit. Each behavior-touching remediation lands with its module's CTest
target green per the Q-W0 verify contract.
**Q-W1 (safe opener — scope grows):**
- Add `tail_control` to the `core/json` consumer list (T2-02) — the wave's "one JSON path" goal
is not met without it. (T4-25 confirms the original 4× scope is otherwise accurate.)
- Add the shared `readFileBytes` pure helper to the `core/` utility home (T2-03).
- Rect unification: one concrete `ui::Rect` + `contains()` + per-role aliases, including
retiring the XYWH-vs-LTRB fork and folding in `editor_geometry`'s `Rect` (T2-05 ≡ T4-21);
`clamp01` dedup rider (T4-24); `hitIndex` template only as an opportunistic follow-on (T4-22).
- Structural collapse of the wire `Cursor` family into one shared `wire` codec module beside
`core/json`, consumed by `provenance` / `assignment_request` / `sample_usage` /
`parseBankGeneration` (T2-01(b)).
- `slot_map` extraction rider on the `bank_book` JSON rewire (T4-05); `view_mode_model` planner
split rider (T4-06, optional per T4); `bank_model` unchanged-as-planned (T4-07); `view_lanes`
split only if relocation touches `view.cpp` anyway (T4-09).
- Relocation scope grows to include the ~20 clean VST pure libs, under whichever placement shape
§4a settles (T4 §1.5, T4-18/T4-19).
**Q-W2 (bank_panel split — 6→8 seams):** the wave brief must name **eight** TUs — the planned
six plus `panel_layout` and `panel_drag` (T4-01) — or two of its TUs ship >600 on day one.
Guardrails reaffirmed: audition direct call-through; per-mouse-move work stays plain free-function
calls (T4-28).
**Q-W2v (NEW — VST god-module wave; the T2-06/T4 §1.5 scope gap made structural):**
- `reasampler_editor.cpp` → eight TUs: session / controls / **layout (pure-candidate hoist into
the existing pure homes — this discharges T2-06)** / paint_sample / paint_browse_zone /
input_sample / input_browse_zone / platform (T4-11).
- `reasampler_processor.cpp` → three TUs: `processor_state` / `processor_reload` /
lifecycle+`process()` kept whole (T4-12), with the T4-29 guardrail (no virtual seam on the
atomic-swap pattern).
- `sample_map` → `component_state_io` codec split + matching header split (T4-13 ≡ T2-07).
- `sampler_core`: **TU stays whole at 968 — documented hot-path exception** recorded in the wave
brief (T4-14, T4-27); header splits into `zone_params.h` + `sampler_core.h`.
- The `core/wire/bytes.h` LE-codec template lands here with its biggest consumer (T4-20).
- Rider: adopt the pure `ThumbnailKey` on the VST side while the editor is open (T2-10).
- **Scheduling:** parallel-safe with Q-W2 (different artifact, zero file overlap) — T4 also
offers serial-after-W5 as "Q-W7" if Daniel prefers serial waves (§4f).
**Q-W3 (main.cpp split — 3→4 hoists):** add **`capture_batch`** (batch family +
`RunRecaptureFromSource` + the two selection guards) as a fourth TU so `capture_orchestrator`
lands ~450 (T4-02). Also owned here: **delete `ICaptureBackend`** and correct the
CLAUDE.md/CONTEXT description in the same commit (T4-26); the shared `stampCaptureSample`
epilogue dedup (T2-09); the `capture_realtime_finalize` split riding the Q-9 naming rider
(T4-08); the `makeUniqueTag` monotonic-counter fix (T1-11).
**Q-W4 (actions split): no change** — the planned seams still land sub-600 (T4-03).
**Q-W5 (persist split): seams unchanged** (T4-04); **add** the ext-state grow-loop dedup —
generalize the retry policy into `bridge_marshal` (or its `core/` successor) and rewire all three
loops, `usage_scan`'s prune-safety-adjacent copy included (T2-04).
**Q-W6 (registration table): no change**; T4-02 notes the `main.cpp` registration residue (~385)
shrinks further under its table.
**Unassigned pending §4e:** the WAV/RIFF consolidation family (T2-08 / T4-23 / T4-10) — no
current wave opens `ingest.cpp`; the owning moment is Daniel's call.
Updated dependency sketch:
```
Q-W0 (this report + remediations) ── SUB-GATE: Daniel signs off every disposition (§4) ──
▼
Q-W1 (core/json + wire codec + relocation incl. VST pure libs + rect unification + riders)
├─► Q-W2 (bank_panel split, 8 seams) ──► Q-W4 (actions; unchanged)
├─► Q-W2v (NEW: VST god-modules — editor/processor/sample_map splits, sampler_core header,
│ LE codec) [parallel-safe with Q-W2; serial "Q-W7" alternative — §4f]
├─► Q-W3 (main split, 4 hoists; ICaptureBackend deletion + doc fix; stamp dedup; T1-11)
│ └──► Q-W6 (registration table; unchanged)
└─► Q-W5 (persist; seams unchanged; + ext-state-loop dedup) [best after Q-W4]
```
---
## 4. Daniel's decision list (sign-off gate)
Each item: leading recommendation first, alternative second. Settled matters (Q-10, Q-11 framing,
the clean bills) are deliberately absent.
- **(a) VST placement fork — T4-18 vs T4-19.** *Recommend T4-18:* integrate `src/vst/` into the
one `core/`/`shell/` top split with `instrument/{engine,map,ui}` subsystem dirs — one rule
("directory = may it touch a host type"), the artifact boundary is a link-graph fact the
sources already straddle, CMake impact is path-edits only. *Alternative T4-19:* artifact-first
subtree (`src/vst/core|shell` behind one SDK-gated `add_subdirectory`) — cleanest expression
of the Windows-only gate, at the cost of two parallel `core/` trees and a subtree whose
self-containment is cosmetic. Q-W1 executes whichever shape is chosen.
- **(b) DSP bounded fixes in Q-W0 — T1-01 and T1-03.** *Recommend fix-now for T1-01* (linked
L/R lag + splice schedule): High severity on the flagship stereo-Preserve path, standard
stereo-SOLA practice, no technique change. *Alternative:* defer and record as the known
stereo-Preserve limitation. *For T1-03* (prime bound + immediate `freezeTail()` on
sub-window spans): T1's own framing — fix-now **if the short-one-shot case matters** to you
(short drum one-shots are realistic content); else document-and-defer with the T1 note as the
record. T1-09 (`declickR_` dead state) rides whichever `sampler_core` edit happens.
- **(c) T2-01(a) provenance wire-cursor hardening backport in Q-W0.** *Recommend yes:* small,
pure, closes a concrete robustness gap on persisted user-editable input, covered by existing
`provenance_tests`. *Alternative:* wait for the Q-W1 wire-codec collapse to fix it
structurally — leaves the gap open through the gate for no saving.
- **(d) Env-constant fix-nows in Q-W0 — T3-01 and T3-03.** *Recommend fix-now for both:* each
is trivial, isolated, and a live hardcoded-rate residue Daniel's standing ruling forbids;
behavior-identical at the baked-in rates. *Alternative for T3-03 only* (T3's stated
fallback): document-and-defer with the comment amended to name the 44.1 k assumption, if zero
UI-feel change is preferred. (Folding either into Q-W2v instead is *not* recommended — it
would put behavior changes inside a mechanical-split wave; §2.5(8).)
**Recorded deviation (Q-W0 remediation, code review):** T3-03 as implemented resolves
`fadeMaxFrames()` against `liveSampleRate()` (the host/project rate), not the per-file rate
this section's text literally suggests ("the loaded source's rate"). Reviewer verified this
is the more correct choice: no resample path exists anywhere in `src/`, the engine advances
one source frame per host frame, and this matches the time base `paintEnvelopeOverlay`
already uses for the same fades (`totalSeconds = frames / liveSampleRate()`). No further
action — recorded here so the audit text and the shipped behavior don't read as diverged.
- **(e) WAV/RIFF consolidation moment — the one true track disagreement (T2-08 vs T4-23/T4-10).**
T2 prefers the `core/wav` homing moment (the relocation wave); T4 prefers "the wave that opens
`ingest.cpp`" — which does not exist, and T4-10 points back circularly. *Recommend:* record
the consolidation (one pure `wav_codec` owner: walker + layout + build + patch, absorbing
T4-10's ingest extraction) as a named rider on **Q-W3** — the wave already opening the capture
family (`capture_realtime` finalize, T4-08) — with Q-W1-relocation as the alternative moment
if Daniel prefers T2's framing. Either way it must land somewhere named, or the
dedup-by-hash/null-test maintenance surface stays quadruplicated.
- **(f) Q-W2v scheduling.** *Recommend parallel with Q-W2* (different artifact, zero file
overlap — T4 §1.5). *Alternative:* sequence it serially after W5 as "Q-W7" if you want serial
waves throughout.
---
## 5. Clean bills — surfaces audited and found clean
Consolidated coverage evidence; details in the appendices' clean-surface sections.
**DSP (T1):** `peaks` (bin partition exact, overflow-guarded, per-channel no-fold), `master_gain`
(taper math correct end to end), `velocity_curve` (Fritsch–Carlson monotonicity/no-overshoot
claims hold) — fully clean. Clean with only the noted findings: `wav_trim` (T1-10 metadata note),
offline capture path (T1-11; precision-invariant plumbing "disciplined"), realtime capture path
(T1-11 + already-in-code DAW-verify flags), `sampler_core`'s voice/steal/mono/panic machinery
(rate-free-seconds invariant honored; takeover blend mathematically sound), `pitch_shift`'s core
machinery (safe-band geometry, clamps, correlation, fades, `freezeTail` continuity all audit
sound; down-shift writer-lap unreachable above ≈ −109 st).
**Architecture (T2):** pure-module include hygiene across both trees (zero host-type includes in
any claimed-pure module); `bank_sync`; `bridge_marshal`; the realtime record lifecycle (explicit
enum state machine, not implicit); project-identity transitions; `usage_scan` (decisions
delegated pure, depth-bounded recursion, protect-on-truncation); the three `catch (...)` sites
(documented, narrow, non-swallowing); `FxBypassGuard` vs `view.cpp` park/restore (duplication of
shape, not concept — correctly separate); path resolution (`resolveBankFile` is the single
resolver both sides); WAV decode (one decoder); the draw layer (no parallel vocabulary on the VST
side); interface cost (no hot-path virtual/`std::function` chains); boolean parameters (no
smell). Also T2-11's headline: the ComponentState v1→v11 lift chain is **functionally sound** —
the finding is shape, not correctness.
**Env-coupled constants (T3):** `sample_map` v5+ persistence (the reference implementation);
ComponentState v6–v11 fields; Trigger fade/loop frames as source-file facts with the rate stored
alongside; `trigger_seam`; `kPreserveWindowMs` (the model pattern); `pitch_shift` internal
geometry; the tail system; `wav_trim`; `bank_model` persisted metadata; all ext-state wires; the
envelope schematic's param-domain scaling; every timer surveyed; `peaks` / `waveform_view` /
`master_gain` / `velocity_curve` / `keyboard_strip`. The persistence layer — the category's
highest-stakes surface — is clean end to end.
**Sizing/indirection (T4):** borderline files needing no action: `capture.cpp` (549),
`reasampler_editor.h`/`reasampler_processor.h` (shrink with their TU splits), `bank_book.h`,
`pitch_shift.cpp` (371 — single responsibility, hot, leave), `persist.h`/`capture.h` (owned by
Q-W6). T4-30: no gratuitous indirection anywhere beyond the dead `ICaptureBackend` — VST-side
virtuals are SDK-mandated, and the layered pure→shell pairs are the load-bearing discipline, all
direct calls. Plan-confirmations: Q-W4 and Q-W5 seams land as planned (T4-03/T4-04); Q-W1's JSON
scope confirmed accurate modulo T2-02 (T4-25).
docs/product/design-view.md
+27 -17
View File
@@ -1,8 +1,9 @@
# Design View — product notes
Framing, rationale, and design-direction calls behind the **Design View** phase.
The tickable spec lives in `PLAN.md` (Phase D) and the authoritative technical
detail in `CONTEXT.md` (§Design View). This doc holds the *why* — the workflow
The tickable spec's landed history lives in `docs/ARCHIVE.md` (Phase D) and the
architecture detail in `src/core/view/CLAUDE.md` + `src/shell/view/CLAUDE.md`
(§Design View). This doc holds the *why* — the workflow
narrative, the N-mode reasoning, the screenset differentiation, and the
design-direction recommendations — so those don't clutter the build docs.
@@ -156,12 +157,19 @@ load hitch and any un-persisted internal state is lost. This is an accepted cost
of the CPU reclaim, not a bug. It must be documented at the toggle affordance so
the user isn't surprised.
**Never touched:** `B_MUTE` and `I_SOLO`. The tool owns visibility, `B_MAINSEND`,
`I_FXEN`, and FX-offline — nothing else — across every managed leaf, tagged or
untagged. The user's mute/solo survives every toggle, untouched. This is the exact
analog of the
capture pillar's non-destructive invariant: **the tool never destroys the user's
real state to do its job.**
**Never touched:** `B_MUTE`. The tool owns visibility, `B_MAINSEND`, `I_FXEN`,
FX-offline, and `I_SOLO` — nothing else — across every managed leaf, tagged or
untagged.
**Solo is owned but never lost.** Solo is a per-mode surface: switching modes banks
the outgoing mode's solo state, clears it, and replays the incoming mode's on
return, verbatim. Two modes therefore never share a solo — you can solo the drum
bus in Arrange and the sound-design chain in Design without either leaking into the
other — and neither is destroyed. That is the same exact analog of the capture
pillar's non-destructive invariant the flags above satisfy: **the tool never
destroys the user's real state to do its job.** It is snapshot-and-restore, one
level out from a single toggle to the pair of stances. Reapplying the current mode
(tagging, project load) is not a switch and does not touch solo at all.
---
@@ -315,8 +323,10 @@ Mirrors the capture pillar's split exactly.
- Snapshots prior flag values before parking (reads the same flags it will drive).
- Resolves track GUIDs via `GetTrackGUID` / `guidToString` / `stringToGuid` for the
index; never uses track index (unstable across reorders).
- Never touches the master track's visibility flags; never touches `B_MUTE` /
`I_SOLO` on anything.
- On a real switch only, banks/clears/replays `I_SOLO` per the per-mode solo surface
above.
- Never touches the master track's visibility flags; never touches `B_MUTE` on
anything.
**`persist` slice:**
- Serialize/deserialize the view section (modes + membership + show-both + snapshots
@@ -339,8 +349,7 @@ tooltip on the switch.
`docs/design/`), say so and it moves. Flagging because establishing the
directory is a project convention, not mine to assume silently.
2. **Phase namespace.** Proposed **Phase D** (a lettered namespace) rather than
M12 — see PLAN.md rationale. Confirm you're happy with letters for parallel,
non-capture phases.
M12. Confirm you're happy with letters for parallel, non-capture phases.
3. **SDK name correction.** The brief cited `B_SHOWINMCP`; the verified SDK flag
for mixer-panel visibility is **`B_SHOWINMIXER`** (SDK header line 2235). The
spec uses the verified name. Just flagging the discrepancy so it isn't a
@@ -585,11 +594,12 @@ The settled distinction:
touch them**: a mode toggle never shows, hides, silences, re-lanes, or re-plays a
manual lane. Its `C_LANEPLAYS` state is the user's, left exactly as they set it.
This is the fixed-lane analog of the two invariants already load-bearing in D1 —
*never touch `B_MUTE`/`I_SOLO`* and *never touch the master* — extended to a third
surface: **never drive a lane the tool did not mint.** It is the same non-destructive
promise (the tool owns only what it created) reaching one level deeper, into the lane
dimension.
This is the fixed-lane analog of the invariants already load-bearing in D1 —
*never touch `B_MUTE`*, *never touch the master*, and *never lose the user's solo*
(see "Never touched" above) — extended to a further surface: **never drive a lane
the tool did not mint.** It is the same non-destructive promise (the tool owns only
what it created, and restores what it parks) reaching one level deeper, into the
lane dimension.
### Lane-ownership index (the new data)
docs/product/instrument-control-surface.md
+1641
View File
File diff suppressed because it is too large Load Diff
docs/product/linux-readiness.md
+1305
View File
File diff suppressed because it is too large Load Diff
docs/product/midi-playback.md
+72 -58
View File
@@ -2,10 +2,11 @@
Framing for a **MIDI-triggered audio sampler** that plays back ReaSampler's captured
banks. This began as a discussion-shaping doc; with all forks now settled it has become
the **product framing behind a scoped phase**. Its build roadmap lives in **PLAN.md
§Phase S** and its authoritative spec in **CONTEXT.md §Phase S** — this doc holds the
*why* (the plugin-format reasoning, the bare-VST3-vs-JUCE assessment, the settled
decision record).
the **product framing behind a scoped phase**. Its build roadmap lives in
**`docs/ARCHIVE.md` §Phase S** and its authoritative spec in
**`src/core/instrument/CLAUDE.md`** and **`src/shell/instrument/CLAUDE.md`** — this
doc holds the *why* (the plugin-format reasoning, the bare-VST3-vs-JUCE assessment, the
settled decision record).
Status: framed by product-designer (2026-07-26), **revised 2026-07-27 (r11)**. r11 records the
**Sample-face recomposition** (Daniel's post-landing DAW pass, 2026-07-27): all linear sliders →
@@ -42,10 +43,11 @@ demoted to an opt-in Zones panel — see the r6 Addendum in §4. r6 also settles
S1–S6 instrument: the product name **ReaSampler 9000** and the **"better than RS5K" UX
overhaul** (Phase S points S10–S13) — see the r5 Addendum in §4. r4 (below) settled the four
residual forks D-A..D-D. The
"no PLAN.md footprint" era is **over** — with D-A through D-D settled (below), the
"no landed-roadmap footprint" era is **over** — with D-A through D-D settled (below), the
instrument was scoped into **Phase S** (codename Daniel's: "S" for Sampler, because "D"
collides with the existing Design View phase). **PLAN.md §Phase S is now the
authoritative roadmap; CONTEXT.md §Phase S is the authoritative spec.** This doc is the
collides with the existing Design View phase). **`docs/ARCHIVE.md` §Phase S now records
the landed roadmap; `src/core/instrument/CLAUDE.md` and `src/shell/instrument/CLAUDE.md`
are the authoritative spec.** This doc is the
framing/decision record they point back to. Prior revisions (a) established that a REAPER
*extension* cannot be a MIDI instrument, (b) corrected a material omission — REAPER's
**VST-host bridge**, which lets a VST3 plugin *hosted inside REAPER* call back into
@@ -410,8 +412,8 @@ it doesn't carry" — is unchanged. What the bridge settles is *where that mappi
between extension and instrument as **live shared `"reasampler"` state**, not a file one
writes and the other re-parses.
**What the current index carries** (from `bank_model`'s `Sample`, per CONTEXT.md §Data
model): id, display name, relative path, source range, channel count, sample rate,
**What the current index carries** (from `bank_model`'s `Sample`): id, display name,
relative path, source range, channel count, sample rate,
length, capture tempo, an **optional key**, peak/RMS/LUFS, content hash, tier,
provenance, timestamp. Notably it *already* has an optional key field and capture
tempo — the seeds of pitch-mapping are there.
@@ -426,8 +428,8 @@ tempo — the seeds of pitch-mapping are there.
to velocity zones).
- **Round-robin groups** (cycle through N samples on repeated same-note hits).
- **Loop points** (sustain loop start/end for held notes; sample-accurate,
zero-crossing-aware — CONTEXT already flags loop/zero-crossing handling as
day-one-relevant for wavetable material).
zero-crossing-aware — loop/zero-crossing handling is day-one-relevant for
wavetable material).
- **Amplitude envelope** (ADSR) and optionally filter/pitch envelopes.
- **Tuning/gain trim** per sample.
@@ -559,7 +561,7 @@ ReaSampler-native way to build it and it's assumed, not debated, going forward.
All four residual decisions are now called. Each is marked **SETTLED** with Daniel's
choice and the reasoning kept as the record of *why* — do not re-litigate. They are
scoped into **PLAN.md §Phase S** / **CONTEXT.md §Phase S**.
scoped into **`docs/ARCHIVE.md` §Phase S** / **`src/core/instrument/CLAUDE.md`**.
**D-A — SETTLED: bare Steinberg VST3 SDK + LICE editor (no JUCE).** *(The central fork.
§1a is the assessment that fed it. The sub-question — who draws the editor? — was the
@@ -649,7 +651,7 @@ After Phase S was scoped (D-A..D-D), Daniel set two further directions. These ar
**settled directions**, not open forks — specced as new Phase S points (S7–S9), not
re-litigated. Recorded here per the doc's settled-decisions convention.
**D-E — Channel mode: mono | stereo, per-instance, bus-negotiated (→ PLAN.md S7).**
**D-E — Channel mode: mono | stereo, per-instance, bus-negotiated (→ `docs/ARCHIVE.md` §S7).**
Captures are often stereo; the current mono downmix is a Tier-0 simplification. The
engine gets a **per-instance channel-mode toggle (1 mono / 2 stereo)** that "works with
the REAPER audio bus automatically" — the VST3 declares/negotiates its output bus
@@ -662,8 +664,8 @@ Cross-mode policy: mono-source-in-stereo → dual-mono; stereo-source-in-mono
never a bank fact). Sequenced **first after the editor/embed work** because it touches the
engine Daniel smoke-tests.
**Ingest routes through the bank — "option 1"; the extension owns ingest (→ PLAN.md
S8 + S9).** Loading a sample into the sampler is **one gesture**: capture/import-into-bank
**Ingest routes through the bank — "option 1"; the extension owns ingest (→
`docs/ARCHIVE.md` §S8 + §S9).** Loading a sample into the sampler is **one gesture**: capture/import-into-bank
+ auto-assign to the active instance. The **extension owns ingest** (it has arrange
access, Media-Explorer access, and the drop-target surface on its own panels); the
**instrument stays a read-only bank consumer** — it never captures or imports. Sub-parts,
@@ -690,7 +692,7 @@ with the honest SDK reality verified against the vendored headers:
*The genuine spikes flagged (not decisions Daniel owes, just build-time unknowns):* the
ME merely-selected-file read (b), and the drop-onto-editor cross-artifact relay (c). Both
are honestly-flagged as spikes in PLAN.md S8, not promised.
are honestly-flagged as spikes in `docs/ARCHIVE.md` §S8, not promised.
### Addendum — product name + UX overhaul (Daniel, 2026-07-26, post-S1–S6 DAW test)
@@ -700,7 +702,7 @@ open forks (the two flagged forks below are the only calls left to Daniel).
**The instrument's product name is `ReaSampler 9000`.** The extension stays **ReaSampler**
(capture + organization); the instrument is **ReaSampler 9000** (playback). Propagation is
a checklist item (PLAN.md §Phase S — product name; CONTEXT.md §Product name): the VST3
recorded in `docs/ARCHIVE.md` §Phase S — product name: the VST3
class **display name** string, the `IPlugView` editor title band (today "ReaSampler
Instrument"), the S6 embed-strip label, and the docs. **Compat guard (load-bearing):** the
**VST3 class UID must NOT change** — instances in saved projects key off it; a UID change
@@ -747,8 +749,9 @@ names the editor as the wound.
After the r5 UX-overhaul directive was specced (keymap-first S10), Daniel reframed the
workflow before S10 was implemented. This **revises S10** and settles S-NAME-1. Settled
directions, not open forks — recorded here per the doc's settled-decisions convention; PLAN.md
§S10 and CONTEXT.md §Phase S (workflow hierarchy) carry the spec.
directions, not open forks — recorded here per the doc's settled-decisions convention;
`docs/ARCHIVE.md` §S10 records what landed and `src/core/instrument/CLAUDE.md` (the
editor `ui/` modules) documents the current architecture.
**The reframe, verbatim (Daniel, 2026-07-26):** *"We need to think hard about the workflow
with this plugin. Have a giant list of 'item' blocks is visually useless. When the plugin is
@@ -806,8 +809,8 @@ partly on filename, fall back to keeping the filename and record that as shipped
Daniel directed a set of engine features for the sampler, specced as **new Phase S points
S15 (Trigger vs Gate) and S16 (pitch envelope)**. **The feature set is settled** — recorded
here per the doc's settled-decisions convention; PLAN.md §S15/S16 and CONTEXT.md §Sampling
modes carry the spec. Two forks are flagged with leans (S15-F1 choke, S15-F2 param
here per the doc's settled-decisions convention; `docs/ARCHIVE.md` §S15 / §S16 records what
landed and `src/core/instrument/CLAUDE.md` §Sampling modes documents the current spec. Two forks are flagged with leans (S15-F1 choke, S15-F2 param
granularity); the WDL question was resolved by inspection.
**Directive, verbatim (Daniel, 2026-07-26):** *"let's have product spec out some features
@@ -927,9 +930,10 @@ This reshapes S16 and **flips the r7 WDL verdict** on `WDL_SimplePitchShifter`.
`process` allocation; measure per-voice CPU + onset latency against the polyphony cap. Treat
S16's Preserve-engine point as the phase's next real DSP spike, not a thin envelope add-on.
**Where the spec lives:** PLAN.md §S16 (reshaped to "pitch engine modes + pitch envelope",
with forks S16-F1/F2 and the corrected WDL finding) and the S15 × S16 interaction note;
CONTEXT.md §Pitch engine modes — Varispeed vs Preserve + the corrected WDL surface finding.
**Where the spec lives:** `docs/ARCHIVE.md` §S16 (reshaped to "pitch engine modes + pitch
envelope", with forks S16-F1/F2 and the corrected WDL finding) and the S15 × S16
interaction note; `src/core/instrument/CLAUDE.md` §Sampling modes — Varispeed vs Preserve
+ the WDL surface finding.
### Addendum — VST channel isolation (Daniel, 2026-07-26)
@@ -972,9 +976,9 @@ with or right after the in-flight waves (S9 ext_keys, S15/S16 processor/editor)
channel's banks; stable-project + beta-VST = clean empty (not error); the S-NAME-1
rename/rebind test extends to the beta UID.
**Where the spec lives:** PLAN.md §S18; CONTEXT.md §VST3 channel identity — the UID pair + the
pairing surface. The pairing surface's data half is already load-bearing V4 machinery; S18
adds only the identity fork on top.
**Where the spec lives:** `docs/ARCHIVE.md` §S18; `src/shell/instrument/CLAUDE.md` §VST3
channel identity — the UID pair + the pairing surface. The pairing surface's data half is
already load-bearing V4 machinery; S18 adds only the identity fork on top.
---
@@ -986,8 +990,9 @@ good — but the two-view editor (today's "Browser" + "Zones" toggle) misallocat
the default window is undersized for a 1080p world, and the drop-a-capture-onto-FX gesture is
broken in practice. The directive: **make the one job — pick a capture, tune it, play it —
fast, easy, and fun. Style is a critical ingredient. No spreadsheet aesthetics.** These are the
`r9` calls. Authoritative spec: **CONTEXT.md §Phase S — editor view-model redesign (S-VIEW)**;
build roadmap: **PLAN.md §Phase S — editor view-model redesign**.
`r9` calls. Current architecture: **`src/core/instrument/CLAUDE.md`** and
**`src/shell/instrument/CLAUDE.md`**; landed record: **`docs/ARCHIVE.md` §Phase S — editor
view-model redesign**.
**The reference devices (the north star for control density).** Daniel named Ableton **Simpler**
and a Kilohearts/Phase-Plant **sampler group** as the composition targets. Both share one
@@ -1021,7 +1026,7 @@ grammar, and it is the grammar the redesign adopts:
loading a new one is a distinct act), not a three-way radio. *Why the reframe matters:* it
makes "I just want to play this capture" the zero-click default, and "I want a different one"
a single deliberate gesture, instead of making the user re-choose their whole stance every
time. See CONTEXT.md §S-VIEW for the precise navigation model.
time. See `docs/ARCHIVE.md` §S-VIEW-1 for the precise navigation model as landed.
2. **The Sample view earns the hero treatment; Browse gets ruthlessly cut.** Browse today
carries a waveform preview, root-note piano-roll, loop-point labels, a track-root message, and
@@ -1037,10 +1042,10 @@ grammar, and it is the grammar the redesign adopts:
3. **Two engineering prerequisites, framed but routed to implementation.** The **drop-to-FX bug**
(dropping a capture onto a track's FX chain does not instantiate + init ReaSampler 9000) and
the **undersized default window** are not design decisions — they are a bug and a one-line
default. Both are framed in CONTEXT.md §S-VIEW with the SDK reality swept (drop-to-FX: the S17
machinery is SDK-correct, so this is a *diagnosis* task, not a redesign; window size: the
`getSize`/`checkSizeConstraint` mechanism is verified), and both are flagged for
staff-engineer, not for a product fork.
default. Both are recorded landed in `docs/ARCHIVE.md` §S-VIEW-BUG-1 (drop-to-FX: the S17
machinery is SDK-correct, so this is a *diagnosis* task, not a redesign) and §S-VIEW-SIZE-1
(window size: the `getSize`/`checkSizeConstraint` mechanism is verified), and both were
flagged for staff-engineer, not for a product fork.
**New parameters this introduces (both instrument performance state, D-B — never bank facts):**
@@ -1064,7 +1069,7 @@ grammar, and it is the grammar the redesign adopts:
new top-level `previewVelocity` field), **not** the extension's `persist` project ext-state —
that module is REAPER-project-scoped and extension-owned, so it would make the level
project-global instead of per-instance and route an instrument concern through a bank-read-only
seam. See CONTEXT.md §S-VIEW for the round-trip and back-compat lift. This is what makes the
seam. See `docs/ARCHIVE.md` §S-VIEW-4 for the round-trip and back-compat lift as landed. This is what makes the
preview button *fun*: tap it hard or soft without reaching for a controller — and it remembers.
**Two visual components the redesign commits to:**
@@ -1101,8 +1106,10 @@ persisted fields is not a compat event; saved instances rebind and restore. And
(extended additively — `keyTrack` per-zone, `previewVelocity` per-instance via an envelope bump to
v6, both with back-compat defaults on read) are the same load-bearing core.
**Where the spec lives:** CONTEXT.md §Phase S — editor view-model redesign (S-VIEW); PLAN.md
§Phase S — editor view-model redesign. This Addendum is the *why*; those are the *what/how*.
**Where the spec lives:** `src/core/instrument/CLAUDE.md` (envelope overlay, key-tracking,
preview-velocity ownership) documents the current architecture; `docs/ARCHIVE.md` §Phase S
— editor view-model redesign records what landed (S-VIEW-1 through S-VIEW-10). This
Addendum is the *why*; those are the *what/how*.
---
@@ -1110,7 +1117,7 @@ v6, both with back-compat defaults on read) are the same load-bearing core.
**Framing.** Folds one more control into the S-VIEW redesign: a **visual velocity → amp
transfer-curve editor**. Today the engine maps velocity to gain *linearly* (`velocityGain_ =
velocity / 127.0`, `sampler_core.cpp:261`), applied once at note-on in `Voice::start()`. Daniel
velocity / 127.0`, `Voice::start()`), applied once at note-on in `Voice::start()`. Daniel
wants that mapping to become an **editable transfer curve** — a bezier from a default flat line to
an arbitrary multi-point curve — so velocity dynamics are fully shapeable per sound.
@@ -1174,7 +1181,7 @@ a LICE shell that draws handles and routes the mouse).
evaluation is called at note-on, not per frame (see call 4).
4. **Voice-engine application point → `Voice::start()`, replacing the linear `velocity/127`.**
Confirmed from source: `sampler_core.cpp:261` computes `velocityGain_ = velocity / 127.0` **once
Confirmed from source: `Voice::start()` computes `velocityGain_ = velocity / 127.0` **once
at note-on** inside `Voice::start()`; the per-frame render path (`advanceFrame`, line 408:
`gain = amp * velocityGain_`) then just multiplies the cached scalar. So the transfer curve
slots in at exactly one line: `velocityGain_ = curve.eval(velocity)` at note-on — **off the
@@ -1217,8 +1224,9 @@ for preview velocity — a different struct on a different version axis). Concre
the L1 kit, routing mouse through `velocity_curve`), gated on the foundation track and composing
with the S-VIEW-2 Sample face + S-VIEW-3 envelope-overlay work.
**Where the spec lives:** CONTEXT.md §Phase S — editor view-model redesign (S-VIEW), velocity-curve
sub-section; PLAN.md §Phase S — editor view-model redesign (S-VIEW-9/S-VIEW-10 + fork R10-F1). This
**Where the spec lives:** `src/core/instrument/CLAUDE.md` (the `velocity_curve` module, its
engine application point, and its ownership rules) documents the current architecture;
`docs/ARCHIVE.md` §S-VIEW-9 / §S-VIEW-10 records what landed (fork R10-F1 resolved). This
Addendum is the *why*; those are the *what/how*.
---
@@ -1273,16 +1281,20 @@ small labelled knobs in functional clusters** — and drives the **Wave B editor
same knob deck + button/popup — Sample and Zone already edit one storage site (S15-F2); the lean
is that they should speak one control grammar too. Daniel's call (it grows Wave B scope).
**What does NOT change (guardrails).** Zero engine/state/persistence change — this is a view
recomposition of *existing* controls; no new params, no component-state bump, VST3 class UID
unchanged. All drawing through the L1 kit by palette role; all layout/hit-test in new pure modules
**What does NOT change (guardrails).** Zero engine-behavior change — this is a view
recomposition of *existing* controls, with one additive exception: the new post-mixer master
gain persists as `masterGainLinear`, bumping `ComponentState` v7→v8 (back-compat: pre-v8 blobs
lift to unity gain); VST3 class UID unchanged. All drawing through the L1 kit by palette role;
all layout/hit-test in new pure modules
(`knob_deck`, `curve_popup` — mirrors of `action_bar`/`overflow_menu`); the knobs and the hero's
envelope nodes remain two surfaces on one param model (S-VIEW-F2's structural sync, untouched).
The full inventory contract (every landed element → its r11 home) is in the CONTEXT.md spec.
The full inventory of what landed (every element → its r11 home) is recorded in
`docs/ARCHIVE.md` §FB1 and §FB2.
**Where the spec lives:** CONTEXT.md §Phase S — editor view-model redesign (S-VIEW) → "The
Sample-face recomposition (r11)"; PLAN.md §Phase S — editor Wave B (S-VIEW-11/12/13 + forks
R11-F1/R11-F2). This Addendum is the *why*; those are the *what/how*.
**Where the spec lives:** `src/core/instrument/CLAUDE.md` (the `knob_deck`/`curve_popup`/
`master_gain` modules) documents the current architecture; `docs/ARCHIVE.md` §FB1 and §FB2
record what landed (S-VIEW-11/12/13 + forks R11-F1/R11-F2 resolved). This Addendum is the
*why*; those are the *what/how*.
---
@@ -1329,7 +1341,8 @@ Post-DAW-test directives (2026-07-26; see the "product name + UX overhaul" Adden
frameworks), DS-2 (Direction B "Neon Console" + Direction C's spectral keyboard strip), and
DS-3 (thorough panel layout) are all **SETTLED (2026-07-26)**. Framing + palette + the three
visual directions + forks: `docs/product/visual-design-language.md` (on `dev`); roadmap +
spec: **PLAN.md §Phase L + CONTEXT.md §Phase L** (on `dev`). **S10–S13 build with the
spec: **`docs/ARCHIVE.md` §Phase L** (landed record) and **`src/core/ui/CLAUDE.md`**
(current architecture) (on `dev`). **S10–S13 build with the
current drawing and adopt the L1 kit when it lands — not gated on Phase L.** Answers
Daniel's "the VST is dogshit / temple os / does Cockos have a toolkit" (2026-07-26,
post-S1–S6 DAW test).
@@ -1350,15 +1363,16 @@ Post-DAW-test directives (2026-07-26; see the "product name + UX overhaul" Adden
S15-F1 (choke, held) / S15-F2 (param granularity, lean per-zone). Feature set settled;
the engine default is Daniel's fork.
**Authoritative from here:** **PLAN.md §Phase S** is the roadmap (S1–S6 the original
dependency chain: spike → `Sample` fields → pure sampler core → Tier 0 → Tier 1 → embedded
UI; then **S7** stereo, **S8** ingest, **S9** change-detection, **S10–S13** the ReaSampler
9000 UX overhaul, **S15/S16** the Trigger-vs-Gate + pitch-engine-modes engine features);
**CONTEXT.md §Phase S** is the spec (seam-field semantics, scope contracts, the channel-mode
/ ingest / bank-generation / sampling-mode / pitch-engine contracts, the UX-overhaul spec,
the product-name convention, the pure/shell split, the WDL finding, the must-verify
SDK/bridge surfaces). This doc is the framing/decision record they point back to. The "no
PLAN.md footprint" era is over.
**Authoritative from here:** **`docs/ARCHIVE.md` §Phase S** is the landed roadmap (S1–S6
the original dependency chain: spike → `Sample` fields → pure sampler core → Tier 0 → Tier
1 → embedded UI; then **S7** stereo, **S8** ingest, **S9** change-detection, **S10–S13** the
ReaSampler 9000 UX overhaul, **S15/S16** the Trigger-vs-Gate + pitch-engine-modes engine
features); **`src/core/instrument/CLAUDE.md`**, **`src/shell/instrument/CLAUDE.md`**, and
**`src/core/wire/CLAUDE.md`** are the current spec (seam-field semantics, scope contracts,
the channel-mode / ingest / bank-generation / sampling-mode / pitch-engine contracts, the
UX-overhaul spec, the product-name convention, the pure/shell split, the WDL finding, the
must-verify SDK/bridge surfaces). This doc is the framing/decision record they point back
to. The "no landed-roadmap footprint" era is over.
---
docs/product/multi-bank.md
+3 -2
View File
@@ -1,8 +1,9 @@
# Multi-bank — product notes
Framing, rationale, and design-direction calls behind the **Multi-bank** phase.
The tickable spec lives in `PLAN.md` (Phase B) and the authoritative technical
detail in `CONTEXT.md` (§Multi-bank). This doc holds the *why* — the workflow
The tickable spec's landed history lives in `docs/ARCHIVE.md` (Phase B) and the
architecture detail in `src/core/model/CLAUDE.md` + `src/shell/bank_ops/CLAUDE.md`
(§Multi-bank). This doc holds the *why* — the workflow
narrative, the pool-privilege reasoning, the movement semantics, and the
design-direction recommendations — so those don't clutter the build docs.
docs/product/parameter-automation.md
+1032
View File
File diff suppressed because it is too large Load Diff
docs/product/provenance.md
+4 -4
View File
@@ -1,10 +1,10 @@
# Provenance — product notes
Framing, rationale, and the dual-canvas reconciliation behind the reshaped
**Milestone 10 (provenance)**. The tickable spec lives in `PLAN.md` (M10); the
authoritative technical detail is `CONTEXT.md` (§Data model, §capture) plus this
note for the reconciliation calls. This doc holds the *why* and the open forks so
they don't clutter the build docs.
**Milestone 10 (provenance)**. The tickable spec's landed history is in
`docs/ARCHIVE.md` (M10); the architecture detail is in `src/core/model/CLAUDE.md`
and `src/shell/capture/CLAUDE.md` plus this note for the reconciliation calls.
This doc holds the *why* and the open forks so they don't clutter the build docs.
Status: **IMPLEMENTED (2026-07-26).** Settled 2026-07-23; landed 2026-07-26.
Reshaped from the old "provenance + null-test verify" M10. Two decisions were fixed
docs/product/removal-and-prune.md
+17 -14
View File
@@ -2,24 +2,26 @@
Framing, rationale, and open forks behind the two missing removal capabilities:
**sample-remove** (a sample-level index verb) and **prune** (the file-lifecycle
path CONTEXT.md keeps forward-referencing but never scoped). The tickable spec
lives in `PLAN.md` (Phase B point B5 for remove; **Phase R** for prune) and the
authoritative technical detail in `CONTEXT.md` (§Sample removal, §Prune — file
lifecycle). This doc holds the *why* — the workflow, the guardrails, the
index-vs-file boundary, and the forks that need a Daniel decision.
path the spec kept forward-referencing but never scoped). The tickable spec's
landed history is in `docs/ARCHIVE.md` (Phase B point B5 for remove; **Phase R**
for prune) and the architecture detail lives in `src/core/model/CLAUDE.md` +
`src/shell/bank_ops/CLAUDE.md` (§Sample removal) and `src/core/reclaim/CLAUDE.md`
+ `src/shell/persist/CLAUDE.md` (§Prune — file lifecycle). This doc holds the
*why* — the workflow, the guardrails, the index-vs-file boundary, and the forks
that need a Daniel decision.
Status: framed by product-designer (2026-07-23); **all five forks settled by Daniel
(2026-07-24)** — R-A this-bank-primary, R-B batched REAPER undo points
(Phase-B-wide), R-C trash-preferred-with-unlink-fallback, R-D owned-file manifest
(seam lands early in Phase B / capture), R-E manual action + panel button. The
decisions are folded into the fork sections below and into the B5 / Phase R spec
prose in CONTEXT.md and the tickable points in PLAN.md.
decisions are folded into the fork sections below and into the B5 / Phase R
history in `docs/ARCHIVE.md` and the architecture docs above.
---
## The one boundary that governs everything: index vs. file
ReaSampler already draws a hard line, stated repeatedly in CONTEXT.md: **a bank
ReaSampler already draws a hard line: **a bank
operation touches the *index*, never the *file*.** Move, copy, evacuate, and
delete-bank are all index-only; files persist on disk "until prune." Every
removal capability below sits on exactly one side of that line, and keeping the
@@ -120,7 +122,7 @@ line. It is the verb Phase B forgot, not a new pillar.
---
## Prune — the file-lifecycle path CONTEXT.md kept promising
## Prune — the file-lifecycle path the spec kept promising
### What the user is doing
@@ -131,7 +133,7 @@ purpose. Over a long project the bank folder accumulates dead `.wav` files that
cost disk and clutter. **Prune is the reclaim pass**: "sweep the bank folder,
delete the files nothing references, tell me what you reclaimed."
This is the path CONTEXT.md forward-references in at least four places ("files
This is the path the spec forward-references in at least four places ("files
persist on disk until prune," "the capture/prune path reclaims it") but never
scopes. It is a real, promised capability with **no phase, no module, no point**
— a dangling reference the plan has to make good on.
@@ -141,8 +143,8 @@ scopes. It is a real, promised capability with **no phase, no module, no point**
ReaSampler already shipped this exact shape once. Design View's `view_mode_model`
has **`ViewModeModel::reconcile(liveGuids)`** — a pure function fed the live set
(the tracks that still exist), returning the residual membership entries to drop
(CONTEXT.md §Design View: "prunes orphaned snapshots on every toggle/load;
tolerates unknown/stale GUIDs (prune on reconcile)"). Prune is the **file-pool
(`src/core/view/CLAUDE.md`: "tolerates unknown/stale GUIDs (pruned on reconcile
via `ViewModeModel::reconcile(liveGuids)`)"). Prune is the **file-pool
mirror of that pure pattern**:
> `reconcile(liveGuids)` reconciles *membership entries* against *live tracks*.
@@ -224,7 +226,7 @@ Prune is **not** a Phase B point. Three reasons it earns its own lettered phase
1. **It is a different pillar.** Phase B is the *bank container* pillar
(index-only, non-destructive, above the file). Prune is the *file lifecycle*
pillar (the one path that deletes files). CONTEXT.md already names it as a
pillar (the one path that deletes files). The spec already named it as a
separate concern every time it says "the capture/**prune** path" — file
lifecycle is spoken of as its own thing, owned by neither the capture nor the
bank layer. Giving it its own phase matches how the spec already talks about it.
@@ -337,7 +339,8 @@ capture).** The book tracks the set of files it has created; prune reclaims
ext-state**, and Phase R's R1/R2 *consume* that manifest. The exact persistence
shape — a sibling ext-state key vs. folded into the `banks` blob — is a small
residual to settle at build; the **manifest-now decision is firm**. (Settled
2026-07-24; the up-front point is added to Phase B / the capture path in PLAN.md.)
2026-07-24; the up-front point is recorded in `docs/ARCHIVE.md` under Phase B /
the capture path.)
**Fork R-E — prune trigger: manual-only vs. offer-on-orphaning vs. periodic.
SETTLED: MANUAL ACTION + PANEL BUTTON.** Prune runs via a bindable manual action
docs/product/render-in-place.md
+829
View File
@@ -0,0 +1,829 @@
# Render in place — product notes
Framing, rationale, and design-direction calls behind **Phase Ρ — render a track's
output to a new sibling track, in the timeline, without touching the bank.** The
tickable spec lives in `docs/PLAN.md` (§Phase Ρ); the architecture detail belongs in
`src/shell/capture/CLAUDE.md` and `src/core/capture/CLAUDE.md` once the track lands.
This doc holds the *why* — the third-verb argument that reconciles this feature with
the capture/placement separation, the prior art it borrows from, the reuse inventory
that makes it small, and the handful of decisions the shape actually turns on.
Status: framed by product-designer (2026-08-02) from Daniel's direct request the same
day; **all three [Daniel]-class forks RULED the same day** — Ρ-F1 **refuse a
multi-track selection**, Ρ-F2 **the result track always goes to Arrange**, Ρ-F3
**follow the panel tail setting**. See §"Rulings" for the index and the recorded
rationale; each is specified in place in the section that owns it. Nothing in this
doc is open.
**Ρ-F2 overrode the framing, including Daniel's own original phrasing.** The request
as first stated had the new track take whatever mode was active when the action fired;
the ruling replaced that with an absolute rule. §"Mode transitions" is written against
the ruling, and the A/B-on-the-bench behaviour that mode-following would have produced
**no longer exists anywhere in this design** — do not reintroduce it as a benefit.
Everything else below is a product-designer call with its reasoning stated; contradict
it in review with an argument, not a preference.
---
## What it is (and what it is not)
**Render in place takes one selected track, renders its output over the current
range to a file, and drops that file as an item on a brand-new sibling track at the
exact position it was rendered from — then moves the source track into Design mode.**
The new track inherits the source's colour and its name with a `Capture ` prefix, and
belongs to Arrange unconditionally (Ρ-F2). The bank is never opened, never read, never
written.
The model Daniel named is REAPER's own *Render selected track time selection to new
track (stereo) and mute original*. Phase Ρ differs in exactly one respect, and that
respect is the whole feature: **instead of muting the original, it parks it.** The
source track goes to Design mode — hidden from the arrange, out of the mix, FX
offline, CPU reclaimed — and its rendered audio takes its place in the arrangement.
That is a strictly better disposition than mute, because mute leaves the design
scaffolding visible and its FX resident; Design mode removes both, reversibly, from
a snapshot.
**It is not a capture.** No `Sample` is minted into any `BankModel`, no index entry is
added, no file is recorded in the tracking ledger, the bank generation is not bumped,
and no live ReaSampler 9000 instance reloads. The bank does not change in any way an
observer could detect.
**It is not a freeze.** The source track's FX chain is untouched — not removed, not
bypassed permanently, not flattened. Design View's park is snapshot-based and fully
restored on toggle-back (`src/shell/view/CLAUDE.md` §Non-destructive restore), so
switching to Design brings the source back exactly as it was, FX and routing intact.
Ableton's *Freeze & Flatten* destroys the device chain; Phase Ρ never does.
**It is not a placement of a bank sample.** The insert action and the arrange drop
both take something already in the bank and put it on the timeline. Phase Ρ's file
was never in the bank and never will be. The two paths share `InsertMedia` and
nothing else.
---
## The third verb — and why the load-bearing principle survives it
Root `CLAUDE.md` carries the tool's sharpest rule:
> **Capture and placement are separate acts.** Capturing audio writes a file to the
> bank and adds an index entry. It **never** puts an item in the arrange view. […]
> Any code path that auto-inserts a capture into the timeline violates the purpose of
> the tool and **must be rejected in review**.
Phase Ρ renders audio, places an item in the arrange, and deliberately does not touch
the bank. The question is not rhetorical and the answer is not "it's fine because
Daniel asked for it."
**The answer is that the rule is about the bank, not about rendering.** Read the
sentence again: the object of "capturing" is *the bank* — a file in the bank folder
plus an index entry. The prohibition attaches to *that act* placing an item. What the
rule protects is a two-way boundary:
- the arrangement must never gain an item as a side effect of a bank gesture, and
- the bank must never gain a member as a side effect of an arrangement gesture.
Phase Ρ crosses neither direction, because **the bank is not a party to it.** The
system has two verbs today and gains a third:
| Verb | Source | Sink | Touches the bank |
|---|---|---|---|
| **Capture** (`RunCapture`, batch, realtime, bake, ingest) | arrange / instrument | bank | writes it |
| **Placement** (`RunInsertSelected`, `performArrangeDrop`) | bank | arrange | reads it |
| **Render in place** (Phase Ρ) | arrange | arrange | never |
Three verbs, three distinct (source, sink) pairs. The bank appears in exactly two of
them and never on both sides of one. The load-bearing rule is the statement that no
single verb may have the bank on one side and the arrange on the other *in the wrong
direction* — and Ρ has the bank on neither side.
What Ρ shares with capture is the **render**, not the capture: the same
`renderOffline` seam, the same `FxBypassGuard`, the same exact-bounds custom time
window, the same multi-track refusal, the same `RENDER_ADDTOPROJ = 0`. A render is a
mechanism; a capture is a render *plus* a bank landing. Ρ takes the mechanism and
declines the landing. That is reuse, not a breach.
### The boundary that keeps them from bleeding
Four things must stay true. Each is a review-rejectable condition, and three of the
four are structural rather than remembered:
1. **Ρ's shell never names the bank.** `render_in_place.cpp` must not call
`session.bank()`, `session.book()`, `session.recordCreated()`, or
`session.bumpBankGeneration()`. The `Sample` that `OfflineRenderBackend::capture`
returns is discarded, and on the project-media destination its `relativePath` is
left **empty** — so a Ρ `Sample` is inert by construction and could not be usefully
added to a bank even by accident.
2. **Ρ cannot express "write into the bank folder."** The destination reaches the
backend as a **two-valued enum** (`Bank` / `ProjectMedia`), never as a caller-supplied
path. There is no string a Ρ caller could pass that lands a file in
`reasampler_bank/`. This is the single most important structural choice in the
phase: it makes the boundary a type, not a convention.
3. **Ρ's file is never recorded as owned.** Prune deletes `(owned ∩ present) −
referenced` (`src/core/reclaim/CLAUDE.md`), where `owned` comes from the tracking
ledger. Ρ records nothing, so its file is not prune-eligible — and it lives outside
the bank folder, so prune's enumeration never sees it either. Two independent
layers. The symmetry is worth stating plainly: **the tool deletes only what it
owns, and a render-in-place file belongs to the project, not to the tool.**
4. **The traffic is one-way.** Ρ may borrow capture's render. **Capture may never
borrow Ρ's placement.** No capture action grows a "…and place it" option, ever. If
a future request wants capture-and-place, the answer is "fire the capture action,
then fire the insert action" — two acts, which is the whole point.
**What would count as drift**, stated so a reviewer can name it: a `renderDir` string
on `CaptureRequest` instead of the enum; a Ρ path that calls `session.bank().add()`;
a Ρ file recorded via `recordCreated`; a `place` flag added to `CaptureActionDef`; or
a "Ρ but also add it to the bank" convenience action. Any of those collapses the
three verbs back into two and the rule stops meaning anything.
---
## Prior art, and what each one contributes
The shape is not novel; the *disposition of the source* is. Named precedents, because
they anchor the argument better than reasoning does:
- **Logic Pro — Bounce in Place.** The idiom Ρ's name borrows. Renders a track's
output to audio at the same timeline position, on a new track, with the source
preserved. Confirms that "in place" in DAW usage means *at the same timeline
position*, not *onto the same track* — which is why the name is right despite Ρ
creating a new track.
- **Pro Tools — Commit.** The closest prior art, and the one that validates the mode
transition. Commit offers four dispositions for the source track: *Hide and Make
Inactive* (the default), *Make Inactive*, *Delete*, and *Do Nothing*. The default
is hide-and-deactivate — visually gone and processing gone. That is precisely what
Design View's park already does (`B_SHOWINTCP=0`, `B_SHOWINMIXER=0`,
`B_MAINSEND=0`, `I_FXEN=0`, per-FX offline), except that Ρ gets it *reversibly and
as a membership fact* rather than as a per-track inactive flag. Ρ is Commit with
a fifth disposition the DAWs do not have — *move to the design bench* — supplied by
the tool's own mode system.
([Sound on Sound](https://www.soundonsound.com/techniques/making-commitments),
[Production Expert](https://www.production-expert.com/production-expert-1/pro-tools-track-commit-vs-track-freeze))
- **REAPER — Render selected track time selection to new track and mute original.**
The action Daniel named. Contributes the range semantics (time selection) and the
new-track placement; Ρ replaces its source disposition and adds colour/name
cloning.
- **Ableton Live — Freeze & Flatten.** Contributes a negative: flatten destroys the
device chain. Ρ explicitly does not, and the Design-mode park is what makes
preserving it cost nothing at playback.
---
## What already exists — the reuse inventory
Daniel's framing was that the machinery is in place. It substantially is. This table
is the proof, and it is also the spec's shape: each row names the module that answers
the need, so the implementation is composition rather than construction.
| What Ρ needs | Already answered by |
|---|---|
| Resolve the source track + the range (razor-else-time) | `shell/capture/scope_resolve` — `ResolveScopeSource(CaptureScope::Track, …)` |
| Refuse a multi-track render | `core/capture/render_settings` — `isMultiTrackStemRender` / `multiTrackRefusalMessage`, fired inside `renderOffline` |
| Render exactly the requested window, wet, at track scope | `shell/capture/capture_orchestrator` — `renderOffline` + `FxBypassGuard` + `RenderTrackSelection` |
| Never add the render to the project as an item | `shell/capture/capture.cpp` — `RENDER_ADDTOPROJ = 0`, unconditional |
| Refuse a widened render | `core/capture/render_window::frameCountFor` + the bounds gate in `OfflineRenderBackend::capture` |
| Snapshot and restore every `RENDER_*` project setting | `ScopedRenderSettings` (RAII) in `capture.cpp` |
| Force the project to be saved first | the `EnumProjects` / `Main_SaveProject` gate in `OfflineRenderBackend::capture` |
| Name the render after its source track + a discriminator | `core/capture/capture_name` — `composeCaptureName`, `shell/capture/capture.cpp` — `captureNameFor` |
| Read the source track's display name (with the `Track N` fallback) | `shell/capture/scope_resolve::trackName` |
| Collapse a bit-identical stereo render to mono | `core/capture/wav_codec::collapseToMono`, driven by `collapseCapturedFileToMono` |
| Compute the `InsertMedia` bitmask with the stretch bit provably clear | `core/capture/insert_plan::computeInsertMode` |
| Place a file at a known track + time, undo-wrapped, selection restored | the recipe in `shell/capture/insert.cpp` / `shell/actions/arrange_drop_win.cpp` |
| Move a track into Design and reapply the active mode | `core/view` `MembershipIndex::tag` + `shell/view/view.h` `applyMode` / `mintManagedLanes` |
| Persist the view model | `ReaSamplerSession::saveToActiveProject()` (the `persistViewState` pattern in `design_view_actions.cpp`) |
| Register one more bindable action | `shell/actions/action_registry` — one `ActionTableRow` in `main.cpp`'s table |
| Pure folder arithmetic over the flat `I_FOLDERDEPTH` delta list | `core/capture/track_topology` (extended — see §"The new track") |
**What genuinely does not exist**, and why nothing already there stretches to cover
it — three small pure additions and one bounded seam:
1. **A render destination that is not the bank.** `OfflineRenderBackend::capture`
derives its output path from `deriveBankPaths(projectDir, …)` unconditionally
(`capture.cpp`'s `OfflineRenderBackend::capture`) and points `RENDER_FILE` at the bank folder. Nothing about
that is parameterized. The alternative — render into the bank and then move the
file out — was rejected: it puts a transient, unindexed, unowned file inside the
folder prune enumerates, which is exactly the file class the ownership rule exists
to reason about, and it would make the bank folder momentarily lie about its
contents. **Seam:** a `CaptureDestination { Bank, ProjectMedia }` field on
`CaptureRequest` (defaulting to `Bank`), resolved by the backend *after* its own
save gate, plus a `RenderPaths deriveRenderPaths(absoluteDir, baseName, uniqueTag)`
sibling in `capture_paths` that `deriveBankPaths` is then expressed in terms of, so
the file-stem spelling keeps one owner.
2. **The absolute path of the rendered file, returned.** `CaptureResult` carries only
`sample.relativePath`, which Ρ deliberately leaves empty. One new field,
`CaptureResult::absolutePath`, set on the Ok path.
3. **Where a sibling track goes, in folder terms.** Genuinely new, genuinely
necessary, and genuinely small — see §"The new track".
4. **The idempotent `Capture ` prefix.** Six lines in `core/capture/capture_name`.
Everything else is composition. No new directory, no new backend, no new interface,
no new persisted state.
---
## The render — scope, range, refusal
**Scope is Track**, always. `CaptureScope::Track` means the render hears the item/take
FX plus the selected track's own track FX, with every ancestor and the master
neutralized to unity — no FX, no fader, no pan/width/law colouring
(`fxBypassPlanFor`, `FxBypassGuard`). That is exactly right for a drop-in
replacement: what the render contains is *the track's own contribution to its
parent*, which is what the new sibling track must reproduce when it feeds the same
parent.
**The range is razor-else-time selection**, resolved by `ResolveScopeSource` — the
same rule every other capture action already obeys. Razor wins when present; the
razor union's bounds are the window. If neither a razor area nor a time selection is
present, the action refuses with the reason `resolveRange` already produces. **Item
extent is not a fallback**, and should not become one: item extent is item scope's
concern, and a track render bounded by whichever items happen to be selected is a
different and much less predictable verb.
**Multi-track selections are refused**, inherited rather than re-implemented.
`renderOffline` fires `isMultiTrackStemRender` before touching anything, keyed on the
render *source* (`SelectedTracks`, which track scope always uses), so any selection of
more than one track refuses with `multiTrackRefusalMessage(CaptureScope::Track)`
before a single project setting is written. Ρ inherits this for free and adds no
check of its own.
**Ρ-F1, RULED by Daniel, 2026-08-02: *refuse*.** One selected track per fire is a
**settled non-goal**, in the same sense as the other entries in §"What Phase Ρ
explicitly is NOT" — not a deferral. There is no per-track loop planned, no second
wave holding one, and no seam to be left half-open on the way past. If multi-track is
ever wanted it is a new phase with its own framing, and the counter-argument that made
this a fork (the stem-collapse hazard does not apply to a per-track loop, so the
refusal is inherited rather than required) is recorded in §"Rulings" so it does not
have to be rediscovered.
**Tail follows the panel setting — Ρ-F3, RULED by Daniel, 2026-08-02: *"follow panel
tail settings."*** None / Auto / Manual, read from `bankPanelTailSetting()` like every
other capture path. Forcing `None` would be Ρ inventing a policy the rest of the tool
does not have, and a decaying design chain wants its tail when its source is about to
be silenced.
**Two consequences of that ruling, both accepted, both stated here because an
implementer meets them directly:**
1. **Under Auto or Manual the placed item is longer than the window it replaces.** The
chain's decay rings past the range end and the render carries it, so the item on
the result track extends past the source range. This is correct for reverb and
wrong for a section meant to butt against the next one — and the ruling accepts
that trade rather than splitting the behaviour. The user's lever is the panel's own
tail setting: set it to None before firing if a hard edge is wanted.
2. **The exact-bounds gate is inactive under Auto and Manual.** The gate in
`OfflineRenderBackend::capture` runs **only** under `TailMode::None`, so Ρ renders
in the other two modes are unguarded against a widened render. This is inherited
from every other capture path, not introduced by Ρ, and it is not a caveat to bury:
the phase's exactness guarantee under Auto/Manual is the *start* only.
The placed item's **start is exact in every tail mode**, because a tail is only ever
added at the end. The null test therefore holds in all three modes — the shared region
nulls; the tail simply has nothing to null against.
A third option was floated at framing and is **not ruled in**: keep the panel setting
but run the bounds gate's start-alignment check regardless of tail mode, since a tail
only ever extends the end. It is recorded as an unexercised alternative in §"Rulings"
and is not to be built into this phase.
**Mono collapse applies**, unchanged. A render whose channels are bit-identical
collapses losslessly to one channel and REAPER derives a mono item from the file
(`insert.cpp` passes only a path). Daniel's Ψ.6 ask named "mono arrange items"
explicitly, so this is the intended outcome, not a side effect. **But note what Ρ
changes about the risk:** root `CLAUDE.md` already flags, as `[verify — DAW]`,
whether REAPER sums a 1-channel item on a stereo track at the same unity gain as a
dual-mono 2-channel item. Until Ρ, that property was unverified but not load-bearing
— nothing in the tool placed a collapsed capture automatically. **Ρ is the first path
where a collapsed render is placed into the mix by the tool itself,** which promotes
that question from a footnote to a verification obligation on this phase.
---
## Where the file goes
**The project's recording path** — `GetProjectPathEx(proj, buf, sz)` (SDK header
2550), which the header's own `RECORD_PATH` entry names as the way to get the
*effective* path when `RECORD_PATH` is blank or relative (header 3102).
Why there rather than a dedicated `reasampler_renders/` folder: because the file is
**the project's media, not the tool's.** REAPER's own render-to-new-track, apply-FX,
and freeze glue actions all write into the recording path; *Clean current project
directory* and *Save project as… with copy of media* both understand it. A file in
the recording path is managed by REAPER's project-media machinery, which is exactly
the machinery that should own it. A `reasampler_renders/` folder would be marginally
more findable and would make ReaSampler the apparent owner of files it explicitly
does not own — the wrong trade.
The relative-paths-only invariant is untouched: it binds the persisted `BankIndex`,
and Ρ writes nothing to any index. REAPER stores the item's source path in the `.rpp`
by its own rules.
---
## Placement — exactly
The item lands at **`src.startSeconds`**, the render window's start, unrounded and
**unsnapped**.
Unsnapped is the load-bearing word. `performArrangeDrop` runs its drop time through
`SnapToGrid` because a hand drop wants snapping; Ρ must not, because a snapped
placement would move the audio off the sample-accurate position it was rendered from
and break the property the whole tool is built on. **Ρ's placement is the null test
performed automatically:** an offline render of a range, re-inserted at its source
position, nulls to silence against the source — root `CLAUDE.md` calls that the
tool's trust anchor. Ρ *is* that gesture, made a workflow. If Ρ's placement is not
sample-exact, Ρ is broken, and the way you find out is by soloing the two tracks with
one polarity-inverted.
The recipe is `insert.cpp`'s, verbatim, with the bank lookup removed:
snapshot the cursor → `SetOnlyTrackSelected(newTrack)` → `SetEditCurPos(startSeconds,
false, false)` → `InsertMedia(absolutePath, computeInsertMode(InsertOptions{}))` →
restore the cursor. `InsertOptions{}` defaults give native length, no tempo conform,
and `insert_plan` guarantees the &4 stretch-to-time-selection bit is never set — so
"do not silently time-stretch on insert" holds by construction. Ρ must never offer a
conform variant: a conform would defeat the exact placement it exists to produce.
**Selection afterwards is a deliberate divergence.** Every other placing path
restores the caller's track selection. Ρ leaves **the new track selected, alone.**
The reason is specific: in the headline case the source track is being parked out of
sight in the same gesture, so restoring the selection would leave the user selecting
an invisible track. The new track is the workflow's next subject; select it. The edit
cursor *is* restored, since nothing about Ρ argues for moving it.
**The Ρ-F2 ruling inverts that reasoning in the Design-fired case, and the rule stays
absolute anyway.** Fired from Design, the result track is the parked one and the source
is the visible one, so leaving the result selected selects an invisible track — the
exact thing the rule exists to avoid in the other direction. Making the selection
conditional on the active mode would reintroduce mode-relative behaviour, which is
precisely what the ruling removed from this action. One rule, both cases: the result
track ends up selected, alone.
---
## The new track — index, folder, colour, name
### Index and folder — the one piece of genuinely new arithmetic
"Sibling" is easy to say and has three cases. Getting it wrong is audible, not
cosmetic, which is why this is the one place Ρ adds a real (small) pure function
rather than composing.
The naive answer — insert at `sourceIndex + 1` — is wrong twice:
- **Source is a folder parent** (`I_FOLDERDEPTH >= 1`). Inserting immediately after
it makes the new track the folder's **first child**, so the rendered audio is
summed back into the folder and runs through the parent's FX and fader a second
time. Track scope already put the parent's own FX and fader *into* the render, so
this double-processes audibly.
- **Source is the last track in its folder** (`I_FOLDERDEPTH <= -1`). The source
carries the folder's closing delta, so inserting after it lands the new track
**outside** the folder — the audio then bypasses the folder bus entirely and the
drop-in replacement is silently wrong in the other direction.
The correct rule is one computation in absolute nesting levels, over the same flat
`I_FOLDERDEPTH` delta list `track_topology::directChildIndices` already prefix-sums.
Given `depth[i]` for every track and `level[0] = 0`, `level[i+1] = level[i] +
depth[i]` (and `level[count] = 0` for a well-formed project):
1. `L = level[srcIdx]` — the source's own nesting level.
2. **Insert position** `p`: if `depth[srcIdx] >= 1` (folder parent), `p` = the first
`j > srcIdx` with `level[j] == L` — i.e. immediately after the whole folder, at
the source's own level; `count` if none. Otherwise `p = srcIdx + 1`.
3. **Two folder-depth writes**, and only two. With `b = p - 1` (the track that will
precede the new one) and `Lp = level[p]` (the level the track currently at `p`
sits at, `0` at end-of-project): set `depth[b] = L - level[b]`, and set the new
track's `depth = Lp - L`.
The total of all deltas is preserved, so nothing downstream of the insertion shifts.
Checked against every case:
| Case | `depth[b]` after | new track `depth` | Result |
|---|---|---|---|
| Normal track, mid-folder or top level | unchanged (`0`) | `0` | inserted directly below, same level |
| Last track in a folder (`-1`) | `0` | `-1` | new track becomes the folder's last member |
| Last in two folders (`-2`) | `0` | `-2` | closing delta moves to the new track intact |
| Folder parent | unchanged | `0` | new track lands after the whole folder, at the parent's level |
| Last track in the project | unchanged | `0` or the source's close | consistent, sums to zero |
That is roughly thirty lines, fully unit-testable with no DAW, and it belongs beside
`directChildIndices` in `core/capture/track_topology` — same input, same arithmetic,
same file. A malformed project whose deltas do not sum to zero should clamp rather
than assert; the failure mode is a track at the wrong nesting level, never a crash.
Creation is `InsertTrackInProject(proj, p, /*flags=*/0)` (SDK header 3954), then
`GetTrack(proj, p)` (3501) to obtain the handle. **`flags = 0`, not `1`:** the header
states `flags&1` adds default envelopes/FX, and a Ρ track must be bare — the FX are
already baked into the audio, and a default chain would process the render a second
time.
### Colour
`SetMediaTrackInfo_Value(newTrack, "I_CUSTOMCOLOR", (double)GetTrackColor(source))`.
`GetTrackColor` (3517) returns the custom colour already OR'd with `0x1000000`, or
`0` when the track has no colour set; `I_CUSTOMCOLOR` (2942) treats a value without
that bit as "not used." So the same single line clones a colour *and* clones the
absence of one, with no branch.
### Name
`"Capture " + sourceName`, where `sourceName` is `scope_resolve::trackName(source)` —
`GetTrackName` (3629), which already answers REAPER's `Track N` convention for an
unnamed track. An unnamed track 7 therefore yields `Capture Track 7`, which is a real,
deterministic, identifiable name; this is Ψ-W2-T1's precedent applied unchanged.
Written with `GetSetMediaTrackInfo_String(newTrack, "P_NAME", buf, true)` (2997).
**The prefix is idempotent — it never stacks.** If the source name already begins with
`"Capture "`, the new name is the source name **verbatim**. So rendering `MONEY`
gives `Capture MONEY`, and rendering `Capture MONEY` gives `Capture MONEY` again, not
`Capture Capture MONEY`.
The alternative — a counter suffix, `Capture MONEY 2` — is rejected. REAPER does not
uniquify track names either, duplicate track names are ordinary and harmless, and a
counter is a treadmill that has to be maintained forever. What actually distinguishes
two renders of the same source is their position in the track list and the item on
each; the name's job is to say *what this is*, and it says that correctly the first
time. Making the operation a fixed point is worth more than distinguishability here.
This is one pure function in `core/capture/capture_name` — `captureTrackName(sourceName)`
— tested for the plain case, the already-prefixed case, the empty-source case, and
the `Track N` case. The prefix string is a display convention, not a persisted key:
unlike `kManagedLanePrefix` or an action-id suffix, changing it later strands nothing.
---
## Mode transitions — the source parks, the result goes to Arrange
Daniel's original phrasing was *"the source track stays/goes to design mode, and the
resulting new sibling track […] stays in whatever mode was active when the action was
run."* **The second half was overridden by his own later ruling — Ρ-F2, 2026-08-02:
*"for this action which is not a capture, the result track should always go to
arrange."*** The source half stands exactly as first stated; the result half is now
absolute and mode-independent.
**Source track: unconditionally a Design member afterwards.**
`membership().tag(sourceGuid, kDesignModeId)` covers both readings in one call —
`tag` replaces any prior single-mode membership, so a source already in Design
*stays* (no observable change) and a source in Arrange or untagged *goes*. This is
exactly what the shipped `VIEW_TAG_DESIGN` action does to a selection; Ρ performs it
on one track as part of a larger gesture.
Two inherited behaviours to state rather than fight:
- **Show-both on the source is not cleared.** Show-both is the user's explicit "pin
this visible across modes" flag. Ρ tagging a source into Design must not silently
unpin it; a show-both source stays visible in both stances, which is what the user
asked for.
- **A folder-parent source is not hidden by tagging it.** Parents are derived, never
tagged: a parent is visible in every mode any descendant leaf is visible in
(`core/view/CLAUDE.md`). Tagging a folder parent Design sets its *own* membership
but leaves it visible in Arrange as long as any child is an Arrange member. This is
a limitation of the shipped model that the existing tag action shares exactly; Ρ
inherits it. Do **not** invent a cascade that tags the children — that changes the
membership model to make one feature convenient.
**Result track: unconditionally an Arrange member**, whatever mode was active —
`membership().tag(newTrackGuid, kArrangeModeId)`, synchronously and explicitly, **not**
an `untag()` to the Arrange default. The distinction is load-bearing: an explicit
membership record is what protects the ruling from the auto-tag detector (below). An
untagged track is an Arrange member by observable behaviour but carries no record, and
a record is what the detector must be made to respect.
**Note what is novel here, because it is worth a reviewer's attention.** Ρ is the
**first** path in the tree to write an explicit `kArrangeModeId` record. The shipped
*tag selected tracks → Arrange* action does not — it dispatches to `doUntag()`, i.e.
Arrange-by-absence, which is why the constant appears in `view_mode_model` and
`mode_enable` but never in a `tag()` call. The record is nonetheless well-formed and
behaviourally identical to the untagged state everywhere that matters:
`ViewModeModel::isMember` answers `true` for `arrange` and `false` for `design` in
both cases, the derived-parent and lane rules read the same, and `untag()` still
returns it to absence. The only differences are one more entry in the persisted
membership index and — the point — its visibility to the detector's filter. **[verify
— DAW]** that a project saved with an explicit Arrange record round-trips and shows no
behavioural difference from an untagged track; the JSON round-trip is unit-testable and
should be tested, but the live view behaviour is not.
**The placed item is tagged Arrange too**, explicitly, for the same reason. Item
membership is a separate index from track membership and it is what drives lane
minting; leaving the item untagged hands it to the detector, which tags a new item to
the active mode whenever its track has no pre-existing single-mode content — and a
brand-new track never does. After `InsertMedia`, enumerate the new track's items (it
is brand new, so they are exactly the ones just placed) and tag each;
`shell/capture/item_read::itemGuid` is the existing GUID seam.
### The one hazard the ruling creates — the auto-tag detector
The ruling **dissolves** the ordering hazard the mode-following rule carried and
**creates a different one** in its place. Both are stated, because the first was
written into the plan's acceptance criteria and is now wrong.
**Dissolved.** Under mode-following, the tag had to precede the `applyMode` reapply:
an untagged track is an Arrange member by default, so a Design reapply running first
would have parked a track destined for Design, and it would have stayed parked until
the next switch. Under the ruling the result track *is* an Arrange member, so a Design
reapply parking it is the correct outcome and the ordering no longer changes what the
user sees. Tag first anyway, for state hygiene — it is simply no longer load-bearing.
**Created, and it is a defect rather than a nuance.** The panel's new-content detector
(`panel_input::detectNewContent` over `guid_diff::GuidBaseline`, feeding
`view_mode_model::autoTagNewContent`) tags **every new track to the active mode**,
unconditionally: it diffs live GUIDs against the previous tick and never consults the
membership index. Fire Ρ while Design is active and, on the next timer tick, the
detector re-tags the brand-new result track — and its item — from Arrange to Design,
silently reversing the ruling inside a second. Nothing in Ρ's own gesture can outrun
it, because it runs after.
**The fix is one rule, and it is worth stating generally: an explicit tag wins over
the detector.** `detectNewContent` drops any added GUID that already carries a
membership record (`MembershipIndex::query(guid) != nullptr`) before building its
auto-tag input. Two lines, at the point in that function where the model is already in
hand. The rule is right beyond Ρ — the detector exists to classify content the *user*
made, not content the tool made and has already classified — and it is a strict
improvement on an existing rough edge: a track brought back by undo keeps its original
mode instead of being re-tagged to whatever mode happens to be active at the time.
Two alternatives were considered and rejected. Re-arming the baseline after Ρ's
gesture (the `bankPanelNotifyProjectLoaded` mechanism) works, but it absorbs an entire
tick of genuinely new content silently — a blunt instrument aimed at two GUIDs.
Changing `autoTagNewContent`'s own track rule changes Design View's behaviour for
every caller in order to serve one.
The resulting behaviour, stated completely:
| Active mode when fired | Source afterwards | Result track afterwards | What the user sees |
|---|---|---|---|
| **Arrange** | Design — parked, hidden, FX offline | Arrange — visible, in the mix | The headline case. The design chain vanishes from the arrangement and its audio takes its place, at the same position, same colour, named after it. |
| **Design** | Design — visible on the bench | Arrange — parked while Design is active | The bench keeps only the source. The render is not on screen; it is waiting in the arrangement, and switching to Arrange shows it in the source's place. |
**The Design-fired case produces no visible change, and that is the ruling's accepted
cost.** Fire Ρ from the bench and the immediate feedback is that nothing appears. The
price buys the action meaning exactly one thing wherever it is fired — *commit this
design work into the arrangement* — which is the reasoning behind the ruling: Ρ is not
a capture, and a capture's mode-relative habits do not apply to it.
**Feedback deserves reconsideration for this case, and only this case.** Ρ is
otherwise silent on success because the new track is the feedback; fired from Design
there is no visible new track, so a silent success is indistinguishable from a no-op.
**[propose at review]** whether the Design-fired path should emit a one-line
`ShowConsoleMsg` naming the track it created. Recommendation: yes — it costs one line
and one string, and it is the only place in the phase where success is invisible.
**Lane minting runs**, via `mintManagedLanes(view, nullptr)` before the reapply, on
the same path `doMoveItems` already uses — so a track that ends up carrying content
for two modes splits into managed lanes exactly as it would from any other membership
change. Ρ adds no lane rule of its own.
---
## Undo
**One undo block** (`Undo_BeginBlock2` / `Undo_EndBlock2` with `UNDO_STATE_ALL`, i.e.
`-1`), opened before the track is created and closed after the mode reapply — the
same shape `insert.cpp` and `performArrangeDrop` already use. The render itself sits
*outside* the block: `renderOffline` mutates only `RENDER_*` project settings, which
it snapshots and restores by RAII, and writes a file. Nothing there is undoable and
nothing there should be in the undo history.
What one Ctrl-Z therefore restores: the new track is gone, its item with it, the
source track's folder-depth write is reverted, and the track selection is back.
Three residuals, all inherited and all honest:
1. **The rendered file survives.** REAPER's undo does not delete files, prune is the
exclusive deletion authority in this system, and Ρ's file is not even prune-
eligible. An undone render leaves an orphan `.wav` in the project's recording
path — precisely what REAPER's own render and record actions do. Not a defect.
2. **The source stays tagged Design.** REAPER's undo restores live track state but
does not roll back the view model's membership index or active mode — documented
in `src/shell/view/CLAUDE.md` §Gotchas, where `snapshots_` already carries the same
split. The way out is the existing *tag selected tracks → Arrange* action. Do not
build a compensating mechanism for one feature; the model-vs-undo split is a
phase-D-scale question, not Ρ's.
3. **A membership entry for the deleted track's GUID lingers**, harmlessly:
`ViewModeModel::reconcile(liveGuids)` prunes unknown GUIDs on its next pass.
**Persist runs after the block closes, not inside it** — the ordering
`design_view_actions::doMoveItems` already documents, because `persistViewState` may
raise a Save-As dialog and a modal dialog must not sit inside an open undo block.
---
## The action
**Command-id suffix: `RENDER_TRACK_IN_PLACE`.** FOREVER-STABLE per channel
(`channelCommandId` composes `CEREBELLUM_REASAMPLER_` / `CEREBELLUM_REASAMPLER_BETA_`
in front of it), so this string can never change once shipped — user keybindings key
off the composed id.
Chosen deliberately as a **new verb family**, not a member of `CAPTURE_*`. The id is
permanent and it is the most durable statement the codebase makes about which pillar
a feature belongs to; filing this under `CAPTURE_` would encode the exact confusion
the third-verb argument exists to prevent. `RENDER_*` also leaves room for a future
`RENDER_ITEMS_IN_PLACE` without renaming anything.
**Actions-list phrase: `"render selected track to a new track (source moves to
Design)"`**, which REAPER shows as *ReaSampler: render selected track to a new track
(source moves to Design)*. Long, but the parenthetical is not decoration — a user
binding this to a key must know the source is about to disappear from the arrangement
before they press it, not after. The existing family already carries parentheticals of
this weight (*insert selected sample at edit cursor (conform to tempo)*).
Registration is **one `ActionTableRow`** in `main.cpp`'s `buildMainActionTable()` — the
Q-W6 data-driven table drives registration, `hookcommand` dispatch, and the unload
mirror-unregister from that one row. Main section only; no `custom_action` /
`hookcommand2` second registration is needed.
**Feedback:** silent on success (the new track is the feedback), `ShowConsoleMsg` on
every refusal, carrying the reason `resolveRange` / `renderOffline` already produced.
This matches `RunInsertSelected` exactly.
---
## What Phase Ρ explicitly is NOT
Stated as sharply as the goals, because a small phase stays small only if its edges
are named:
- **Not a bank capture, in any form.** No index entry, no ledger record, no
generation bump, no instance reload.
- **Not multi-track.** Ρ-F1, RULED: one selected track per fire; more than one refuses
with the message that already exists. Settled, not deferred — no per-track loop is
planned, half-built toward, or left a seam for.
- **Not mode-following.** Ρ-F2, RULED: the result track is an Arrange member
unconditionally. There is no variant that follows the active mode, no per-fire
choice, and no bench-visible result — firing from Design puts nothing on the bench.
- **Not item-scoped.** No `RENDER_ITEMS_IN_PLACE`, no item-extent range fallback. The
seam is left open by the id family; the feature is not built.
- **Not a tempo-conforming insert.** No conform variant, ever — a conform would
destroy the exact placement the feature exists to produce.
- **Not a mute, not a delete, not a freeze.** The source keeps its items, its FX, its
routing and its automation. It moves stance; it loses nothing.
- **Not a source-track cascade.** Rendering a folder parent does not tag its children,
does not restructure the folder, and does not touch anything but the two
folder-depth values the insertion arithmetic requires.
- **Not a new persisted state.** Membership writes go into the existing `"reasampler"`
view section. Ρ adds no key, no version rung, no wire format.
- **Not a new directory.** Three small pure additions to existing `core/capture`
modules, one new shell TU in `shell/capture`, two lines in `panel_input.cpp`, one
row in `main.cpp`.
---
## Invariant amendments this phase owns
Three statements in the tree become false the moment Ρ lands, and amending them is a
**deliverable of the track**, not a follow-up — the precedent is Phase Ψ, where three
such amendments were carried as acceptance criteria of the tracks that broke them. A
track that lands Ρ without these reads as an invariant breach in review.
1. **`src/shell/capture/CLAUDE.md` §Invariants** — *"`RunInsertSelected` is the one
deliberate exception to capture-never-places … every other capture entry point
writes only a file + index entry."* Ρ adds a second placing path in this
directory. The amended form must say that this directory now hosts two placing
paths and state the discriminator: `RunInsertSelected` places a *bank sample*;
`render_in_place` places a render that never entered the bank. Neither is a
capture placing itself.
2. **`src/shell/actions/CLAUDE.md` §Invariants** — *"`arrange_drop_win` is the only
timeline-placing shell in this directory."* Strictly this stays true if Ρ's shell
lives in `shell/capture/`, but the sentence reads as a claim about the system.
Amend it to be explicit that it scopes to *this directory*, and cross-reference the
third verb.
3. **`src/core/view/CLAUDE.md` §Invariants** — *"New tracks are tagged to the active
mode at creation."* Ρ-F2 makes this conditional for the first time: the detector's
active-mode rule now applies only to a GUID that carries **no** membership record,
because an explicit tag wins over it (§"Mode transitions"). Amend the sentence to
say so, and state the reason in one clause — the detector classifies content the
user made, not content the tool made and already classified. `src/shell/panel/`'s
own CLAUDE.md describes `panel_input` as "the new-content auto-tag timer" without
restating the rule, so it needs no amendment; if that changes, the rule has one
home and this is it.
Root `CLAUDE.md` §"The load-bearing principle" should gain **one sentence**, not a
rewrite: that a render which never enters the bank and never leaves it is a third
verb outside the rule, with the two-way boundary spelled out. The rule's force must
not be diluted — it is what keeps the tool honest — so the amendment names the
exception precisely rather than softening the prohibition.
---
## Where it lives
**Pure** — three additions, all to existing modules with existing test targets, no new
directory:
- `core/capture/track_topology` — the sibling-placement arithmetic
(`siblingPlacement(depths, srcIdx) -> { insertIndex, precedingDepth, newDepth }`).
Same input list, same prefix-sum, same file as `directChildIndices`.
- `core/capture/capture_name` — `captureTrackName(sourceName)`, the idempotent prefix.
- `core/capture/capture_paths` — `RenderPaths` + `deriveRenderPaths(absoluteDir,
baseName, uniqueTag)`, with `deriveBankPaths` re-expressed over it so the stem
spelling keeps one owner (`bankRelativeForName` already depends on that being true).
**Shell** — one new TU plus one bounded edit:
- `shell/capture/render_in_place.{h,cpp}` — the action body. It lives in
`shell/capture/` rather than `shell/actions/` because it composes `renderOffline`
and `ResolveScopeSource` and is genuinely a render path, not a skin over one; the
directory's own CLAUDE.md says action *bodies* belong here and that `shell/actions`
only skins mutation logic owned elsewhere.
- `shell/capture/capture.cpp` — the destination branch (~6 lines at the path
derivation) and `CaptureResult::absolutePath`. **No behavioural change on the bank
path**: the enum defaults to `Bank`, and the bank branch must be byte-identical to
today.
- `shell/panel/panel_input.cpp` — two lines inside `detectNewContent`: drop added
GUIDs that already carry a membership record, so an explicit tag wins over the
auto-tag detector (§"Mode transitions"). This edit exists **only because of the Ρ-F2
ruling**; without it the ruling reverses itself on the next timer tick. No other
function in the file is touched.
- `src/app/main.cpp` — one `ActionTableRow`.
**Performance posture:** every surface is cold — one gesture, once. None of the named
hot paths (peaks envelope compute, audition, the realtime-capture tick's
single-pointer-test idle fast path, the instrument's `process()`) is touched, and no
guardrail applies beyond the general one.
---
## DAW-verification obligations
Following the plan's convention, stated up front so they are an obligation rather
than a discovery. Nothing in Ρ is unit-testable past the pure functions.
- **The null test on Ρ's own output** — render a track over a range, then
polarity-invert the source against the new track and confirm silence. This is the
phase's trust anchor and the single most important check.
- **The three folder cases** — a normal mid-folder track, a last-in-folder track, and
a folder parent — each rendered, each confirming the new track's nesting level and
that the render feeds (or bypasses) the folder bus correctly. `[verify — DAW]`
whether `InsertTrackInProject` at index `p` combined with the two `I_FOLDERDEPTH`
writes settles without an intermediate `TrackList_AdjustWindows(false)` (header
7735; the note at 2721 says some attribute writes need a manual panel update, and
the `isMinor` semantics are undocumented).
- **The collapsed-mono placement** — render a dead-centre source, confirm the item is
mono, and confirm it sums at the same level as the stereo source did. This is root
`CLAUDE.md`'s existing `[verify — DAW]` on mono-item-on-stereo-track summing,
promoted to load-bearing by Ρ.
- **Both mode transitions** — fired from Arrange (source parks; result track visible
and in the mix) and fired from Design (source stays on the bench; result track
parked, then present in the source's place after switching to Arrange). **In each
case wait out at least one panel timer tick and re-check the membership.** That is
the auto-tag-detector regression, and it is the check that catches a missing
explicit-tag-wins filter or an untagged item — either of which silently reverses the
Ρ-F2 ruling. The old ordering check (that the new track is never momentarily parked)
no longer applies: under the ruling the result track is an Arrange member and a
Design reapply parking it is correct.
- **Undo** — one Ctrl-Z removes the track and item and restores the folder depth; the
file survives; the source stays tagged Design.
- **The name and colour clone**, including a second run over an already-prefixed track
(must not stack) and an unnamed source (must read `Capture Track N`).
- **`GetProjectPathEx` on a project saved in a folder with a non-default recording
path**, confirming the render lands where the project's media lives.
---
## Rulings — Daniel's, 2026-08-02
All three [Daniel]-class forks this doc opened were ruled the same day it was framed.
Nothing here is open. This section is an index; each ruling is **specified** in the
section that owns it, and that section is the implementation-binding text.
| Fork | Ruling | Specified in |
|---|---|---|
| **Ρ-F1** | **Refuse** a multi-track selection. One track per fire, inherited from `isMultiTrackStemRender`. A per-track loop is a settled non-goal for this phase, not a deferral | §"The render" — the multi-track paragraph; §"What Phase Ρ explicitly is NOT" |
| **Ρ-F2** | **The result track always goes to Arrange**, whatever mode was active. *"For this action which is not a capture, the result track should always go to arrange."* | §"Mode transitions" — the absolute rule, the item tag, and the auto-tag-detector fix it requires |
| **Ρ-F3** | **Follow the panel tail setting** (None / Auto / Manual), with both consequences accepted | §"The render" — the tail paragraph and its two numbered consequences |
**Ρ-F2 went against the framing, and against the request's own original wording.**
The framing recommended mode-following on the strength of Daniel's first phrasing
("stays in whatever mode was active") and of one use it enabled — an A/B of a chain
against its own render, both on the bench, neither touching the arrangement. The
ruling took the alternative the framing had itself named: an absolute rule, because Ρ
is *not a capture* and the mode-relative habit belongs to the capture pillar, not
here. **That A/B use no longer exists, and no text in this doc or in `PLAN.md` may
still claim it as a benefit.** The cost the ruling accepts is that firing Ρ from
Design produces no visible change; the compensating console message is a
[propose at review] item in §"Mode transitions".
**The ruling also has a cost the framing did not anticipate**, recorded here so it is
not read as scope creep at review: the panel's auto-tag detector tags every new track
to the active mode, so without an explicit-tag-wins filter the Design-fired case
reverses the ruling on the next timer tick. The two-line fix in
`panel_input::detectNewContent` is a **deliverable of this phase**, caused by this
ruling. Under mode-following it would not have been needed — the detector would have
agreed with Ρ.
**Ρ-F1 and Ρ-F3 both matched the recommendation**, so nothing in the spec moved. The
counter-arguments are kept because they are the reason each was a fork rather than a
call, and they will resurface: for Ρ-F1, that the stem-collapse hazard does **not**
apply to a per-track loop (each iteration renders one track), so the refusal is
inherited rather than forced — what a loop would actually cost is bookkeeping (indices
shift per insertion, so the folder arithmetic re-derives each pass; plus an undo label,
a partial-failure story, and a selection-afterwards rule). For Ρ-F3, that a drop-in
replacement arguably wants exact length, and that forcing `None` would have kept the
exact-bounds gate live on every Ρ render.
**One unexercised alternative, recorded and not built.** For Ρ-F3, a third option was
floated at framing: follow the panel setting *and* run the bounds gate's
start-alignment check regardless of tail mode, since a tail only ever extends the end.
It would recover the widening guard on the start edge without losing the tail, at the
cost of editing a gate shared by every capture path for one caller's benefit. It is
**not ruled in** and is not part of this phase. If the unguarded Auto/Manual render
ever produces a real bug, this is the shape of the fix.
docs/product/single-cycle-and-wavetable.md
+1082
View File
File diff suppressed because it is too large Load Diff
docs/product/versioning-and-release.md
+6 -6
View File
@@ -8,8 +8,8 @@ concrete and decidable:
2. **A beta side-channel** — so development can continue and a beta build run
*alongside* the stable one without the beta clobbering the release.
This doc holds the *why*, the forks, and a recommendation. When Daniel picks, the
tickable points land in `PLAN.md` and the deploy/build wiring hands off to dev-ops.
This doc holds the *why*, the forks, and a recommendation. The tickable points'
landed history is in `docs/ARCHIVE.md`; the deploy/build wiring hands off to dev-ops.
This is a framing note; it changes no source or CMake.
Status: framed by product-designer (2026-07-26); **all four forks settled by Daniel
@@ -45,7 +45,7 @@ below:
Two sharp edges follow directly and recur throughout this note:
- **The `STABLE_FOREVER_STRING` command-id contract** (CLAUDE.md; `main.cpp:41`,
- **The `STABLE_FOREVER_STRING` command-id contract** (CLAUDE.md; `app_version.h`'s `commandIdPrefix()`,
prefix `CEREBELLUM_REASAMPLER_`). Command-id strings are minted once and **never
changed after shipping** — user keybindings key off them. Two coexisting binaries
that register the *same* id strings collide in REAPER's Actions list.
@@ -54,7 +54,7 @@ Two sharp edges follow directly and recur throughout this note:
Both binaries reading/writing the same namespace on the same open project means a
**beta can read — and rewrite — a stable project's saved bank/view state.** Given
the forward-only migrations already in the design (legacy `bank_index` retired
after promotion; `banks` authoritative thereafter — CONTEXT.md §Multi-bank), a
after promotion; `banks` authoritative thereafter — `docs/ARCHIVE.md` §Phase B), a
beta that writes a newer schema into a project a user then reopens in stable is a
real corruption path, not a theoretical one.
@@ -67,9 +67,9 @@ allowed to touch.
## What we have today
- No version anywhere. `CMakeLists.txt:2` is `project(reaper_reasampler LANGUAGES
- No version anywhere. `CMakeLists.txt` is `project(reaper_reasampler LANGUAGES
CXX)` — no `VERSION`. The binary announces itself only as `"ReaSampler loaded.\n"`
to the console (`main.cpp:960`). There is no number a user, a bug report, or a
to the console (`main.cpp`). There is no number a user, a bug report, or a
future migration can key off.
- The natural user-visible readout already exists: the docked LICE bank panel, and
the console (`ShowConsoleMsg`). A version has cheap homes; none is wired.
docs/product/visual-design-language.md
+134 -13
View File
@@ -16,11 +16,12 @@ written after Daniel DAW-tested the S1–S6 instrument:
revised 2026-07-26 (Daniel)** from the single electric-cyan accent to a **three-accent
pastel system** (primary/secondary/tertiary = pastel lime green / pastel teal / pastel
purple) — see §6. (A stylish-font upgrade was considered and **declined** by Daniel — no
font bundling/redistribution; the kit keeps its current cached-font face.) The build points it feeds live in
**PLAN.md §Phase L** (**L1** the shared LICE drawing kit, **L2** the dock-panel layout
redesign, **L3** the VST editor + embed-strip restyle) and **CONTEXT.md §Phase L** (the
design-system spec). Toolkit facts below are **verified against the vendored `vendor/WDL`
tree**, not lore.
font bundling/redistribution; the kit keeps its current cached-font face.) The build points it
fed have landed; their history is in **`docs/ARCHIVE.md`** ("Phase L — Look-and-feel", **L1** the
shared LICE drawing kit, **L2** the dock-panel layout redesign, **L3** the VST editor +
embed-strip restyle) and the architecture now lives in **`src/core/ui/CLAUDE.md`** /
**`src/shell/panel/CLAUDE.md`** (the design-system implementation). Toolkit facts below are
**verified against the vendored `vendor/WDL` tree**, not lore.
> **Phase-boundary note (2026-07-26).** This look-and-feel effort was originally drafted
> as Phase S points **S0-DS** (the shared kit) and **S14** (the panel refresh). It was
@@ -415,14 +416,34 @@ against the WCAG tests — §2.1):
| Role | Pastel | Starting RGB (hex) | Job |
|---|---|---|---|
| `accent/primary` | pastel lime green | `~176,224,152` (`#B0E098`) | the live/active/selected signal — the eye-magnet |
| `accent/secondary` | pastel teal | `~132,214,208` (`#84D6D0`) | categorical role A (non-active zones, a second cluster) |
| `accent/secondary` | pastel teal | `~132,214,208` (`#84D6D0`) *(superseded, see below)* | categorical role A (non-active zones, a second cluster) |
| `accent/tertiary` | pastel purple | `~194,170,232` (`#C2AAE8`) | categorical role B (tertiary zones, a distinct affordance class) |
| `accent/hot` | brighter primary tint | `~200,236,178` (`#C8ECB2`) | hover / live / drag feedback (a lighter pastel-lime) |
**Locked values, where they diverge from the starting table (2026-07-31).** `accent/secondary`
darkened to `#38A8A0` (same hue ~176°, same saturation, lightness 0.68 → 0.44). Its **binding
limiter** — the pair that stops it going darker — is the velocity-curve trace on a
*hover-lightened* `bg/cell` at **3.03:1** against a 3:1 floor, tighter than either the AA 4.5:1
text-on-fill pair (4.91:1 on `bg/base`) or the indicator floor on rest `bg/cell` (3.94:1). ONE
new Role was added past the original three, since "exactly three accents" is no longer a
constraint: `overlay/trace` `#816AA6`, a muted violet for marks drawn *over* an accent fill (see
§the two-neighbour problem below). The spectral ramp's mid stop also became its own value —
the original pastel teal `#84D6D0` — but as a private constant, not a `Role`.
**The two-neighbour problem** (rule + numbers owned by `src/core/ui/CLAUDE.md`; the design
consequence is recorded here). A mark drawn *over* an accent fill has to read against the fill
*and* the surface behind it, which caps *any* single value at ≈3.07:1 against both. Two
consequences shape the design rather than the palette: such a role is confined to the band it
was picked for, and a **state** of that mark cannot be expressed as a hotter color — every
value that clears the ceiling sits within 1.05:1 of every other, so the grabbed envelope handle
signals by **size and a punched-out core** instead. That deliberately inverts the kit's
"brighter = hotter" convention in this one band, because over a light fill a brighter tint is a
*lower*-contrast tint (`accent/hot` measures 1.15:1 against the lime).
These are light-ish, low-saturation tints. On the **REAPER-grey surfaces** (`bg/cell` ≈
`#3a3a3a`) they still clear **AA-large (3:1)** and the **state-indicator** floor — but the
margin is **much smaller than it was on near-black** (roughly ~6:1–7:1 on grey vs. ~15:1
on `#12121x`). This is a real DS-2-revision tension: **the greyer background pulls the
margin is **much smaller than it was on near-black** (~7.6:1 primary / ~5.5:1 tertiary /
~3.9:1 the darkened secondary on grey, vs. ~15:1 on `#12121x`). This is a real DS-2-revision tension: **the greyer background pulls the
pastels toward the floor** at the same time the "keep it soft" rule pulls them away from
saturation. Approach from the **soft side** (§2.1) — keep them as pastel as possible while
still clearing the floor on **grey, not near-black** — but **if any pastel used as a state
@@ -469,9 +490,12 @@ the rest of the UI. Concretely: the ramp runs **pastel-lime (primary, low) → p
(secondary, mid) → pastel-purple (tertiary, high)** as a three-stop gradient through the
accent constants (or a slightly wider pastel arc that passes *through* those three anchor
points), keeping every stop in the pastel band. This ties the spectrum to the palette:
the same three hues that mean "live / category A / category B" elsewhere are the endpoints
and midpoint of the spectrum here, so the strip reads as an extension of the accent system,
not a separate neon flourish. The **active** zone still lifts to `accent/primary` +
the same hues that mean "live / category A / category B" elsewhere anchor the spectrum here,
so the strip reads as an extension of the accent system, not a separate neon flourish.
**The mid stop is its own constant, not an alias of `accent/secondary`** (decoupled
2026-07-31): the ramp is a luminance progression while the accents are categorical roles, and
darkening secondary for a categorical reason inverted lo→mid→hi. A monotonicity test now guards
the ordering. The **active** zone still lifts to `accent/primary` +
its bloom, so "which zone is live" stays unambiguous over the categorical spectral bands.
- **Feel:** premium, almost visualizer-grade — but soft and cohesive, a pastel spectrum
@@ -497,7 +521,7 @@ within the pastel intent — is one file.
---
## 5. The build shape (feeds PLAN.md / CONTEXT.md §Phase L)
## 5. The build shape (landed history in `docs/ARCHIVE.md` §Phase L)
Three points and their sequencing.
@@ -547,7 +571,7 @@ draw it.
affordances, per-selection **move / copy / remove** sample menu.
- **Prune** button (R-E) — the byte-deleting action, `warn`-colored.
*M11 adds (dev PLAN.md M11 — merging now):*
*M11 adds (landed — `docs/ARCHIVE.md` Milestone 11):*
- **Action trigger buttons** — clickable buttons that fire the capture + provenance
action family directly (capture item / capture track scopes, re-capture from source,
resample-and-mute-source, batch capture, conform-on-insert, insert-at-cursor, drag-out,
@@ -737,3 +761,100 @@ re-skin).**
font obligation.
- **Phase S is not gated on Phase L** — S7–S13 proceeded in parallel; they adopted the
kit via L3 when it landed. Phase L is complete (L1–L7 all landed).
---
## 8. Antialiasing disposition — the drawn-surface audit
A standing inventory of every class of drawn surface and how it answers antialiasing, so the
audit is re-runnable rather than a one-off sweep. **The rule the table applies:** an
axis-aligned fill or hairline has no aliasing to remove — LICE's `aa` flag is inert on a pure
horizontal or vertical run — so "already clean" there is a statement about geometry, not a
concession. Everything with a slope or a curve must draw through a primitive that antialiases.
**Primitive gotchas this audit established (verified in `vendor/WDL/WDL/lice/`):**
- `LICE_Line` takes INTEGER endpoints. `aa=true` antialiases the span, but the endpoints are
still quantized; `LICE_FLine` keeps float endpoints and `LICE_ThickFLine` is *always*
antialiased and adds width.
- `LICE_FillTriangle` takes **no** `aa` parameter at all — its sloped edges alias, and the
only fix inside the kit is to re-stroke those edges with an AA line in the same ink.
- **`LICE_Arc` does not rasterize an arc.** It rasterizes a whole circle clipped to a
rectangular bounding box per 90° chunk (`lice_arc.cpp` `__DrawArc`), and its AA circle splits
one unit of ink across two adjacent pixels by the **fractional part of the radius**
(`w = yf - floor(yf)`, then `wa` and `ai - wa`). A half-integer radius therefore puts 50% on
each of two pixels at the cardinal points, and stacked radii do not tile — vertical spacing
between rings `r` and `r-1` dilates from 1.0 px at the top to 1.41 px at 45°. Measured on the
shipped 3-ring knob arc: weakest cross-section peak **138/255** and perpendicular weight
**1.62–3.24 px** against a nominal 3 (67% ripple).
- **`LICE_ThickFLine` lays its width along the MINOR axis**, so perpendicular weight is
`wid·cos θ`. Measured at width 2: **1.41–2.00 px** across a 0–90° sweep — it thins to
`1/√2` of nominal at every diagonal.
- Neither of those two is usable for a stroke that must hold a consistent weight. Arcs and
spline contours draw through the analytic stroker instead (`core/ui/stroke_aa` +
`shell/instrument/editor_stroke`): coverage is distance-to-polyline, MAX-accumulated into a
scratch mask and blended **once**. The single blend is the structural part — compositing
per segment re-lays ink over the previous segment's fringe.
- A min/max waveform column plot cannot be antialiased by the column fill itself (the columns
are vertical). The outline is what reads as jagged, so it is stroked separately.
> **Methodological lesson — why this table got two rows wrong.** The original audit verified
> *which primitive each surface called* and treated an `aa=true` argument as the answer. It
> never verified *what the primitive rasterized*. Both misses hid behind a true-looking
> statement: `LICE_Arc` really does antialias, and `LICE_ThickFLine` really is always
> antialiased — neither fact says anything about opacity or perpendicular weight, which is
> what was actually broken. **A disposition row is only earned by a measurement of the
> rendered output** (peak alpha, weight across angle), not by reading the call site.
| Surface | Where | Disposition |
|---|---|---|
| Radial knob track arc | `editor_internal.h` `drawKnobFace` | **Fixed (2026-08-01), widened (2026-08-01)** — the stacked-radius `LICE_Arc` ring never reached an opaque core. Now ONE analytic stroke (`strokeArcAA`); `kKnobTrackArcPx` was initially left at 1 px, below the ≥2 px opaque-core threshold (`core/ui/CLAUDE.md`), and surfaced to Daniel as a by-eye call — he ruled to enlarge all sub-2 px stroker widths, so it is now 2 px and reaches a guaranteed opaque core. |
| Radial knob value arc | `editor_internal.h` `drawKnobFace` | **Fixed (2026-08-01)** — same stroke, `kKnobValueArcPx` = 3 px, clear of the opaque-core threshold. Measured: peak **255/255** at every cross-section, weight **2.95–3.11 px** (5% ripple). |
| Knob needle | `drawKnobFace` | **Fixed (2026-08-01)** — `LICE_ThickFLine`'s minor-axis width thinned it to `cos θ` as the knob swept. Now `strokeLineAA`, 2 px. |
| Inner curve dial arc | `drawInnerDial` | **Fixed (2026-08-01)** — the arc shared the knob track/value arc's stacked-radius opacity defect. Same one analytic fix, at `kInnerDialArcPx` = 2 px (at the opaque-core threshold). |
| Inner curve dial needle | `drawInnerDial` | **Converted (2026-08-01), widened (2026-08-01)** — this needle was already `LICE_FLine` (float endpoints, always AA), not `LICE_ThickFLine`; a 1 px AA line has no width to lay along a minor axis, so it never had the knob needle's `cos θ` defect. Moved to `strokeLineAA` at 1 px for one-seam consistency, not because it was broken — but 1 px is below the analytic stroker's opaque-core threshold, so it fell under Daniel's later blanket ruling and is now `kInnerDialNeedlePx` = 2 px. |
| Staged envelope segment slopes | `editor_paint_waveform.cpp` | **Fixed (2026-08-01)** — one `strokePolylineAA` over the whole polyline, so the stage joints blend once. Vertices stay INTEGER by design: they are the positions the draggable handles are drawn at. |
| Spline (drawn EG) contour | `editor_paint_waveform.cpp` `paintSplineOverlay` | **Fixed (2026-08-01)** — the trace was never gapped; it was fully aliased (every pixel full or empty) because the loop passed INTEGER `cy`, quantizing the slope into alternating 1/2 px steps. Now sub-pixel y (`subpixelFromPoint`) through `strokePolylineAA`. Measured: peak **255/255**, weight **1.95–2.01 px** (3% ripple). |
| Velocity-curve popup trace | `editor_paint_curve.cpp` | **Fixed (2026-08-01)** — same cause, same treatment. |
| Velocity-curve mini thumbnail | `editor_paint_curve.cpp` | **Fixed (2026-08-01), widened (2026-08-01)** — strokes analytically at sub-pixel y instead of integer-endpoint `LICE_Line`. Initially kept as a 1 px hairline (a 2 px trace was thought to blot at thumbnail scale), but 1 px is below the opaque-core threshold; Daniel's ruling raised `kMiniTracePx` to 2 px, same as the popup trace. |
| Waveform min/max columns | `draw_kit.cpp` `drawWaveform` | **Fixed** — column fill unchanged (it cannot alias), plus an AA `LICE_FLine` stroke joining each column's extremes to its neighbour's, in the same ink. Shared with the docked bank panel and the browser cards. **Measured cost** (Release, MSVC 14.44, real LICE, 24 stereo cards × 136 columns = 6528 columns): fill alone 0.070 ms per full-grid repaint, fill+stroke 0.48 ms — the stroke is ~0.41 ms, about 2.5% of a 60 Hz frame, and the grid repaints on hover/scroll/drag, not continuously. One-off scratchpad measurement, 2026-08-01, harness not committed — not a standing regression guard; re-measure before relying on it again. |
| Preview play triangle | `editor_paint_chrome.cpp` | **Fixed** — `LICE_FillTriangle` has no `aa`; its two sloped edges are re-stroked with AA `LICE_FLine`. |
| Envelope/spline node handles (squares) | `editor_paint_waveform.cpp` | Already clean — axis-aligned `LICE_FillRect`. |
| Envelope curve knots (circles) | `editor_paint_waveform.cpp` | Already clean — `LICE_FillCircle` with `aa=true`. |
| Knob body disc | `drawKnobFace` / `drawInnerDial` | Already clean — `LICE_FillCircle` with `aa=true`. |
| Buttons | `draw_kit.cpp` `drawButton` | Already clean — `LICE_RoundRect` with `aa=true`. |
| Piano key faces + edges | `editor_paint_chrome.cpp` `drawKeyboard` | Already clean — axis-aligned fills and a vertical hairline. **See §8.1.** |
| Loop span, crossfade region, marker bars, grab tab | `editor_paint_waveform.cpp` | Already clean — axis-aligned fills. |
| Group fences, card/tab/tooltip borders, focus rings | deck, browse, panel painters | Already clean — `LICE_DrawRect`, axis-aligned. |
| Surface fills + inner edge highlights | `draw_kit.cpp` `fillSurface` | Already clean — `LICE_GradRect` + axis-aligned hairlines. |
| Embed strip (TCP/MCP) | `reasampler_embed.cpp` | Already clean — axis-aligned fills only. |
| Docked bank panel chrome | `panel_render.cpp` | Already clean — axis-aligned fills, rects and hairlines. Its only exposure to this pass is the shared `drawWaveform`. |
| Text | `draw_kit.cpp` `text` | Already clean — `LICE_CachedFont` AA glyph cache (§1.1). |
**Analytic stroker cost** (Release, MSVC, real LICE, one-off scratchpad harness 2026-08-01,
not committed — re-measure before relying on it): 30 knob arcs **0.113 ms → 0.169 ms**; a
500 px spline contour **0.013 ms → 0.047 ms**. About +0.09 ms per full editor repaint, on a
surface that repaints on interaction rather than continuously. Micro-optimisation, each lever
measured in isolation: writing the blend straight to the bitmap's bits rather than through
`LICE_PutPixel` is the big one (arcs 0.169 vs 0.253 ms); reusing the scratch mask across
calls matters on the contour's large bounding box (0.047 vs 0.073 ms); `float` over `double`
is small but real (contour coverage 0.045 vs 0.051 ms). The per-row valid-extent bookkeeping
in the mask is a **wash** against the simpler clear-the-whole-box design (0.218 vs 0.218 ms
for a full repaint) — it wins on the contour and loses on the small arc boxes; it is kept
because the contour is the drag-interactive surface.
### 8.1 Was the piano-key width defect an aliasing artifact?
**No.** Every piano key is an axis-aligned `LICE_FillRect` with an integer width, so there is
no sloped or curved edge for aliasing to act on — the defect could not have had that cause.
It was integer-division residue: `keyboard_strip` tiles same-class keys at one integer width
and the indivisible remainder of the band width has to go *somewhere*. The fix put it in
symmetric end margins instead of in a key, which is arithmetic, not rasterization.
**Does the fix survive DPI scaling?** At the client-pixel level, yes — key widths are uniform
by construction at every client width the strip's test sweep covers. Above that level it is
**unverified**, and for a structural reason worth keeping visible: nothing in the instrument
implements `IPlugViewContentScaleSupport`, so a host that scales the plugin window resamples
the already-rasterized uniform widths at the physical-pixel level, where the guarantee no
longer applies. That is a host-scaling question, not an antialiasing one, and it is recorded
as a gotcha in `src/core/instrument/CLAUDE.md`.
docs/verify-package-transfer.md
+172
View File
@@ -0,0 +1,172 @@
# DAW verification — bank-package transfer across machines
What a DAW pass must establish for `.rsbank` export and import, and the exact strings or
counts to read off. The unit corpus (`tests/fixtures/package_compat/`) already proves the
version ladder, the truncation verdicts and the hostile-name refusals against frozen
bytes. **Nothing below is covered by it**: every cell here depends on a real REAPER
session, a real file dialog, or a genuine second machine.
**Build to use.** Release, installed into `UserPlugins/`, REAPER restarted — extensions
load at startup only. Note the version the *About*/version action reports; §5 needs it.
**Machines to use.** Two: **A** (the source) and **B** (the destination). B must be a
different machine, or at minimum a different user account with its own REAPER resource
path and its own projects folder — the point is that no absolute path from A can resolve
on B. A USB stick, a network share, or a cloud folder are all acceptable transports.
**Projects to use.** On A: one **saved** project with a bank holding at least **three**
samples, at least one of them audibly distinct from the others, and at least one whose
display name carries a non-ASCII character (e.g. `Café hit`). On B: one **saved**,
otherwise empty project.
---
## 1. Export writes one file and touches nothing else
On A, right-click the bank's header in the docked panel → **Export as package...** (or
run *ReaSampler: export active bank as package*). Accept the suggested file name.
Read off:
- The console shows `ReaSampler export: wrote 3 entry/entries (N bytes) to <path>`, with
the entry count matching the bank.
- A single `.rsbank` file exists at that path. **No `.rsbanktmp` sibling remains** — a
leftover temp file means the atomic rename did not complete.
- The bank's card count, the bank folder's file count, and the project's dirty flag are
all **unchanged**. An export writes no ext state and opens no undo point, so REAPER
must not consider the project modified by it alone.
- Nothing was added to the arrange view.
## 2. The transfer itself — the claim no unit test can make
Copy the `.rsbank` to B by whatever transport you chose. Do **not** copy the project, the
bank folder, or anything else.
On B, open the empty saved project. Panel bank menu → **Import bank package...** (or run
*ReaSampler: import bank package (.rsbank)*), and choose the transferred file.
Read off:
- A message box: `Imported 3 sample(s) into a new bank: "<bank name>".`
- The console block repeats that line and ends with `One undo removes the imported bank
and its entries. It does NOT delete the imported files ...`.
- The panel shows a **new** bank with the same display name and the same number of cards,
**in the same order** as on A.
- B's bank folder holds three new files. The non-ASCII display name from A renders
correctly on the card — a mangled name here means the UTF-8 path/name conversion broke
in transit.
- **Audition each card.** They must sound like their counterparts on A. This is the whole
claim: the audio survived a machine boundary with no shared path.
- Press **Ctrl-Z once**. The imported bank and its entries disappear in one step. The
three files remain in B's bank folder (that is stated in the console block above, and is
the designed behaviour — a prune reclaims them). Redo to continue.
## 3. Re-importing the same package never overwrites
Still on B, import the **same** file a second time.
Read off:
- A second new bank appears, named with a suffix (`<bank name> 2`), and the box's
`(a bank named "<bank name>" already exists in this project)` clause appears in the
console block.
- B's bank folder now holds **six** files, not three. The console reports
`3 file(s) landed under a freshly minted name (the package's own name was already taken
in the bank folder). An existing bank file is never overwritten.`
- The first imported bank's cards still audition correctly — nothing was replaced under it.
## 4. Round trip back to the source
On B, export the imported bank (§1) to a second `.rsbank`. Carry it back to A and import
it into A's original project.
Read off:
- The import succeeds and lands as a new bank beside the original.
- The original bank on A is untouched: same card count, same names, same audio.
- Compare the two `.rsbank` files' **sizes**. They will usually differ — entry names,
sample ids and the export timestamp are all legitimately re-minted across a trip. The
payload bytes are what must survive, and that half is closed by
`tests/test_package_round_trip.cpp` against frozen bytes; do **not** treat a size
difference here as a defect.
## 5. The too-new refusal, with the message read verbatim
This is the direction a user hits when a collaborator is ahead of them, and the message is
the only actionable output. Produce it by hand:
1. Copy the `.rsbank` from §1 to a scratch name.
2. Open the copy in a hex editor. Bytes 0–3 are `RSBK`; bytes 4–7 are `formatVersion`
little-endian; bytes **8–11** are `minReaderVersion` little-endian.
3. Change byte **8** from `01` to `02`, and byte **4** from `01` to `02` (a writer cannot
require a reader newer than the format it wrote — leaving `formatVersion` at 1 makes
the file incoherent and it will be refused as malformed instead, which is a different
cell). Save.
4. Import the edited copy.
Read off — the message box, all four lines:
```
Cannot import this bank package.
It was written by ReaSampler <the version noted at the top> and needs package format 2 or newer.
This build (<the same version>) reads package format 1.
Nothing was imported. Install ReaSampler <the same version> or newer and try again.
```
- The writer version named is the one **this** build stamped in §1 (the hex edit does not
touch the semver), so the second and fourth lines will name your own version. That is
expected — what is being verified is that all three facts are present and the box
appears at all.
- **No** new bank, **no** new files in the bank folder, **no** undo point.
## 6. The truncated-download refusal is a different message
Copy the §1 package again and delete the last few hundred bytes (any hex editor, or
`head -c` / `fsutil` — the exact count does not matter as long as the file is shorter).
Import it.
Read off:
- The message box reads exactly: `This file is not a readable bank package (corrupt or
truncated). Nothing was imported.`
- It is **not** the §5 message. Crossing these two is the failure this cell exists to
catch — "install a newer build" does not fix a partial download.
- No new bank, no new files.
## 7. Corruption in the middle is caught before anything lands
Copy the §1 package again and flip a single byte **well past the halfway point** (inside a
payload, not the header). Import it.
Read off:
- The message box names the offending entry:
`This bank package is damaged (entry "<name>" failed its integrity check). Nothing was
imported.`
- The bank folder gained **no** files at all — not even the entries before the damaged
one. Verification runs to completion before the first write, so a damaged package costs
no rollback.
## 8. The unsaved-project refusals
- On B, File → New Project (do not save). Try to import. Read off:
`Save the project before importing a bank package -- an unsaved project has no bank
folder to import into.` The file picker must **not** have opened first.
- On A, in an unsaved project with no bank, try to export. Read off the console:
`ReaSampler export: save the project first -- an unsaved project has no bank folder to
read from.`
## 9. Drag-and-drop reaches the same verb
On B, drag a `.rsbank` from the file manager onto the docked ReaSampler panel.
Read off: the same import box as §2, and the same new bank. A `.rsbank` is a whole bank,
not audio — it must never land as an item in the arrange view.
---
## Recording the result
For each section, record **pass**, **fail with the string actually seen**, or **not
exercised**. §2 and §4 are the load-bearing ones: they are the only cells in this document
that involve a real machine boundary, and no unit test can stand in for them.
docs/verify-track-scope-multitrack.md
+154
View File
@@ -0,0 +1,154 @@
# DAW verification — track-scope capture over a multi-track selection
What a DAW pass must establish for the multi-track track capture, and the exact numbers
or strings to read off. Nothing below can be closed by a unit test: every item depends on
what REAPER actually does with a render request.
**Build to use.** Release, installed into `UserPlugins/`, REAPER restarted — extensions
load at startup only. Set the docked panel's tail toggle to **None** before every cell;
Auto adds an 8 s window and Manual a fixed one, and both would invalidate the frame-count
readings.
**Project to use.** One saved project, project sample rate pinned to 48000. Two audio
tracks, `A` and `B`, each holding one item at least 30 s long, with *audibly different*
content (a tone on `A`, a drum loop on `B`). One folder track `F` with `A` and `B` as its
children, used only in §5.
---
## 1. The regression floor — single-track track capture is unchanged
Select **track `A` only**. Make a time selection from **10.000 s to 12.000 s**. Run
*ReaSampler: capture selected track(s)*.
Read off:
- A file appears in the project's bank folder, and one new card appears on the panel.
- The card's length reads **2.000 s**; its frame count is **96000** (`round(12.0 × 48000)
− round(10.0 × 48000)`). The backend refuses the capture with `BoundsMismatch` if the
render is more than one frame off that, so a landed capture already proves the number
to ±1 — what you are confirming here is that it landed at all.
- The REAPER console shows **no** `ReaSampler capture failed:` line.
- Track `A` is still the only selected track afterwards.
- **Content, not just length.** Listen to the landed file. `A` and `B` carry *audibly
different* content by the project setup above (tone vs. drum loop), so this is a by-ear
check, not a null test: the capture must be the tone alone, with **no** drum-loop bleed.
Expected: pure tone, matching `A` soloed. Failing: any trace of `B`'s drum loop audible
in the file. This is not a tautology check — the SDK header's own `RENDER_SETTINGS` line
admits a second reading, `(&(1|2)==0)=master mix`, under which a single-track track
capture could render the **whole master mix** (both `A` and `B`) rather than `A` alone;
drum-loop bleed here is exactly what that misreading would produce, and this is the
cheapest place in the whole doc to catch it.
**This is the byte-identical floor.** If either cell now refuses, the change is wrong —
the refusal must fire only above one track.
## 2. The defect cell — two selected tracks now refuse
Select **`A` and `B` together**. Time selection 10.000–12.000 s. Run *capture selected
track(s)*.
Read off:
- The console prints exactly:
`ReaSampler capture failed: A track capture renders the selected tracks through the
master, and more than one track cannot land as a single file. Capture one track at a
time, or route them into a folder/bus track and capture that (a folder's own output is
its children summed).`
- **No** new card on the panel, and **no** new `.wav` in the bank folder (check the folder
directly — a stray file with nothing indexing it would mean the refusal fired too late).
- `A` and `B` are both still selected, both still unmuted, and neither track's fader, pan,
or FX-bypass state changed. The refusal returns before any guard is constructed, so
there should be nothing to restore — this reading is what confirms that.
Repeat with a **razor area spanning both tracks** and no time selection: identical
readings. Note that the track *selection* is what the refusal counts — a razor over two
tracks with only `A` selected is a one-track capture and must still succeed (§1).
## 3. The decisive observation — what `&128` actually writes
**This is the one that retires an inference, and it is the reason `docs/TODO.md` still
carries an entry.** The refusal in §2 rests on reading the SDK header's single-file bit
`&(4<<16)` as applying to item/razor sources only, never to `&128` — so N selected tracks
are believed to produce N files. That has never been observed.
Drive REAPER's own Render dialog by hand, with the extension out of the loop:
1. Select `A` and `B`.
2. File → Render. **Source:** *Selected tracks via master* — the dialog wording for `&128`
(SDK header ~3041). Do **not** pick *Stems (selected tracks)* — that is `&2`, a
different source bit that unambiguously writes one file per track and would confirm
nothing about `&128`.
**Bounds:** *Custom time range*, 10.000 to 12.000 s.
3. **File name:** a literal stem with **no wildcards at all** — e.g. `stemprobe`. Clear
`$track` / `$item` / anything else from the pattern; the extension writes exactly one
literal stem, so the probe must too.
4. Render to an empty scratch folder.
Read off — **the file count in that folder**:
- **Two files** (however REAPER disambiguated them, or one file that visibly got
overwritten): the inference holds, the §2 refusal is correct, and the `docs/TODO.md`
entry can be closed by writing this observation into `src/shell/capture/CLAUDE.md` as
fact.
- **One file containing `A` and `B` summed** (confirm by ear, or by nulling it against a
master render of the same range with only `A` and `B` unmuted): the inference is wrong,
the §2 refusal costs a working capture, and the track-scope half should be narrowed back
per the `docs/TODO.md` entry. The item-scope half stays either way.
Also record **what REAPER named the files** — that decides whether a future correct
multi-track capture could ever be built on this source at all.
## 4. Recapture replays the same answer
Take a **single-track** track capture that carries provenance (capture a range on `A`
whose source item is itself a bank sample, so `detectParent` fires), select its card, and
run *re-capture from source*. It must regenerate — same audio, same 96000 frames.
Then construct the multi-track case: a recorded recipe whose `trackGuids` names two
tracks. The reachable way to get one is to have captured it before this change; if no such
entry exists in any project, record that this cell was **not exercised** rather than
inventing one. When it is exercised, read off:
- `ReaSampler re-capture failed:` followed by the **same** message text as §2.
- The bank entry is untouched — same file, same hash, same card.
## 5. The way out actually works
Route `A` and `B` into folder `F`. Select **`F` only**, time selection 10.000–12.000 s,
capture track scope.
Read off: one card, 2.000 s, and the audio contains **both** `A` and `B`. This is what the
refusal message tells the user to do, so it has to be true.
## 6. Realtime still accepts a multi-track selection
Select `A` and `B`. Run *ReaSampler: capture selected track(s) in realtime* over the same
range. Read off: **one** card, and its audio contains both tracks. Realtime taps each
source track with a send into one temp track, so it sums where the offline render cannot —
the divergence from §2 is deliberate and this cell is what confirms it is real.
## 7. Mono collapse — what is and is not reachable
Capture a range on a track whose content is dead-center (a mono source panned center, or
a duplicated-channel file), using time selection **10.000 s to 12.000 s** (2.000 s, 96000
frames at 48000 Hz — the §1 convention, so the resulting file size is exact). The panel has
no channel-count readout anywhere (`Sample::channelCount` is not drawn by
`src/shell/panel/panel_render.cpp`), so read the proxy instead:
- Check the landed `.wav`'s size on disk (Explorer → Properties, or a directory listing). A
successful collapse is the extension's own rebuild — canonical 44-byte header + 96000 ×
4 bytes = **384,044 bytes**. A file near double that (~768,044 bytes, plus whatever
REAPER's own render adds for `bext`/metadata chunks) means the collapse did not fire —
recheck the source is genuinely dead-center before treating this as a defect.
- The console shows **no** `the lossless mono collapse ... already reached the bank; only
the size win from the collapse was lost.` line.
**Not DAW-reachable:** the collapse's *failure* branch. It fires only if the captured file
cannot be read, or its temporary rewrite cannot be written or renamed, inside the same
call that just rendered the file — there is no manual way to inject that fault between the
render and the rename. The branch is covered only at its reporting seam
(`tests/test_wav_codec.cpp`, `testCollapseOutcomeSuffixesAreDistinctStrings`), and its console line
has never been seen in a running REAPER. If you ever do see it, the render already reached
the bank — the report only tells you the collapse's size win was lost, not that the bytes
were verified (see `docs/TODO.md`'s 0-byte-render entry).
src/action_bar.h
-159
View File
@@ -1,159 +0,0 @@
#pragma once
// action_bar — the REAPER-free, LICE-free layout + hit-test math behind the bank_panel's
// TASK-GROUPED toolbars (Phase L, L2 + L4 + L6). L2's dock-panel layout redesign (DS-3: a
// thorough layout, not a re-skin) groups the action-trigger button inventory BY TASK — a compact
// bar of clusters, each button carrying a label sub-rect spanning
// its full height — a single-row short label (L6: the keybinding sub-row was on the button face
// through L5; L6 moves it to the hover tooltip instead). The bar degrades gracefully on a narrow
// panel by dropping WHOLE trailing buttons (never clipping) so the frequent leading cluster
// survives.
//
// L4 re-homes the inventory across TWO toolbars, BOTH driven by this one module: a TOP toolbar
// (Capture + Placement — the two acts the tool exists for) and a BOTTOM toolbar (the Design-View
// verbs, Tagging then Switching). The tiling is cluster-agnostic — it walks the caller's
// ClusterSpec list in order — so the same computeBarSlots / hitTestActionBar serve both bars;
// only the cluster membership and the band rect differ per toolbar.
//
// Why pure (CLAUDE.md §load-bearing split, DS-1 caution): the panel shell owns the SWELL
// window, the L1-kit draws, and the NamedCommandLookup/Main_OnCommand dispatch — all
// DAW-verified. What is NOT DAW-bound — how the clusters tile the bar, where each button and
// its label sub-rect sit, and which button a click hits — lives HERE, unit-tested outside the
// DAW. Mirror of mode_switch / prune_button.
//
// NAME NOTE (brief §name-collision): ButtonRect / ButtonStripRect / ActionButtonRect /
// SegmentRect / CellRect / FooterRect / KitButtonBox are already owned in this namespace, so
// this module's types are ActionBarRect / ActionBarSlot / ActionCluster — grep-checked free
// before minting. They are a distinct concept (a task-grouped multi-cluster bar with text
// sub-rects), so the separate names are correct, not merely non-colliding.
//
// SCOPE: the destructive PRUNE button is NOT in this bar — it stays set-apart in the footer,
// warn-marked, owned by prune_button (L2 keeps prune deliberately away from the frequent
// action cluster). This module lays out only the non-destructive capture/placement/maintenance
// actions.
//
// PURE MODULE: NO REAPER types, NO SWELL, NO LICE, NO vendor/ includes. Standard library only.
#include <vector>
namespace reasampler {
// The task cluster a button belongs to (the L2 "group by task" mandate). The order here is
// NOT itself the bar order — the caller passes ClusterSpecs in the order it wants; this enum
// only names the groups so a slot can carry (and a test/shell can assert) its membership.
//
// L4 split the panel's buttons across TWO toolbars, each an action_bar instance:
// * the TOP toolbar draws Capture + Placement (the two acts the tool exists for);
// * the BOTTOM toolbar draws the Design-View verbs, grouped Tagging then Switching.
// Both toolbars share this ONE pure layout module (the tiling is cluster-agnostic — it walks
// the caller's ClusterSpec list in order), so a cluster value belongs to whichever toolbar
// the shell places it in; nothing here couples a cluster to a specific bar.
enum class ActionCluster {
Capture, // capture item / track / realtime / batch — top toolbar, primary gesture
Placement, // insert at cursor / insert-conform — top toolbar, placing a sample
Maintenance, // re-capture from source / cancel realtime — rarer upkeep actions
Tagging, // tag / untag selected tracks for the active mode — bottom toolbar (L4)
Switching, // activate Arrange / Design, toggle mode, show-both — bottom toolbar (L4)
};
// The bar the clusters are drawn into, top-left origin (SWELL/LICE convention). (x, y) is the
// top-left corner; width/height are the bar extents. The panel reserves this as a fixed-height
// band (its own judgment where — above the tail footer, below the split body).
struct ActionBarRect {
int x = 0;
int y = 0;
int width = 0;
int height = 0;
bool operator==(const ActionBarRect& o) const {
return x == o.x && y == o.y && width == o.width && height == o.height;
}
};
// One visible button's placement within the bar, top-left origin. `index` is the button's
// position in the caller's flat action list (the caller supplies actions in cluster order, so
// index also selects the action to fire on a hit). `cluster` is the task group it was laid out
// under (surfaced so a test can assert the grouping is structural, and the shell can tint a
// cluster). `box` is the whole button rect; `labelBox` is the text area inset horizontally so
// text clears the button edge. Only VISIBLE buttons get a slot — a button that does not fit is
// omitted, never returned clipped, so every slot is fully drawable.
struct ActionBarSlot {
int index = 0;
ActionCluster cluster = ActionCluster::Capture;
int x = 0;
int y = 0;
int width = 0;
int height = 0;
// Label rect (absolute, top-left origin), inside `box`. The label spans the full button
// height — a single-row short label only (L6: keybinding sub-row removed from the face;
// binding is surfaced in the hover tooltip instead).
int labelX = 0, labelY = 0, labelW = 0, labelH = 0;
bool operator==(const ActionBarSlot& o) const {
return index == o.index && cluster == o.cluster &&
x == o.x && y == o.y && width == o.width && height == o.height &&
labelX == o.labelX && labelY == o.labelY &&
labelW == o.labelW && labelH == o.labelH;
}
};
// One cluster's button count, in the caller's flat action-list order. The caller passes these
// in the left-to-right order it wants them drawn (top toolbar: Capture then Placement; bottom
// toolbar: Tagging then Switching); a cluster with count 0 is skipped (no gap emitted for it).
// The flat action index a slot carries is the running sum across clusters (cluster 0's buttons
// are indices [0, counts[0]), etc.), so the shell's flat action table lines up with the slots
// by index.
struct ClusterSpec {
ActionCluster cluster = ActionCluster::Capture;
int count = 0;
};
// Layout inputs for the bar, in pixels. Defaults are the bank_panel action-bar metrics; the
// shell passes its own so draw and hit-test share ONE source of truth.
// * buttonWidth — each button's fixed width (buttons never render narrower; overflow drops
// whole trailing buttons instead of shrinking below this).
// * buttonGap — horizontal gap between buttons WITHIN a cluster.
// * clusterGap — horizontal gap between adjacent clusters (wider than buttonGap so the
// task grouping reads visually; the 8px-grid density decision).
// * sidePad — left/right inset from the bar edges to the first/last button.
// * verticalInset — top/bottom gap inside the bar (buttons read as raised, not full-bleed).
struct ActionBarSpec {
int buttonWidth = 108;
int buttonGap = 4;
int clusterGap = 16;
int sidePad = 8;
int verticalInset = 3;
};
// How many buttons (from the front, cluster by cluster) fit the bar at `spec.buttonWidth`.
// Split from slot tiling so the shell can size an overflow affordance / count without
// re-deriving it. Trailing buttons that do not fit are the overflow (dropped whole). A
// non-positive bar width, or a bar too narrow for even one button, yields 0. Clamps to
// [0, total-button-count].
struct BarFit {
int visibleCount = 0; // buttons that fit (laid out), counted from the front
int hiddenCount = 0; // total - visibleCount (the overflow, dropped whole)
};
BarFit computeBarFit(const ActionBarRect& bar, const std::vector<ClusterSpec>& clusters,
const ActionBarSpec& spec);
// Lays out the VISIBLE buttons (per computeBarFit) left-to-right in cluster order: buttons
// pack at buttonWidth with buttonGap inside a cluster and clusterGap between clusters, starting
// at bar.x + sidePad. Each slot carries its flat action index, its cluster, its box, and the
// label sub-rect (full-height single row). Empty clusters emit no gap. Returns exactly
// visibleCount slots in ascending index order. A degenerate bar (width/height <= 0), an empty
// cluster list, or a non-positive buttonWidth yields empty.
std::vector<ActionBarSlot> computeBarSlots(const ActionBarRect& bar,
const std::vector<ClusterSpec>& clusters,
const ActionBarSpec& spec);
// The flat action index the point (px, py) (SWELL/LICE top-left client coords) lands on, or -1
// for a miss: outside the bar band, in an inter-button / inter-cluster gap, or past the last
// visible button (the narrow-panel overflow dead-zone — a harmless no-op the shell ignores).
// Half-open bounds [x, x+width) x [y, y+height) match computeBarSlots so no pixel is double-
// claimed and the hit maps to the button drawn there. Unlike an equal-tiled strip, the bar has
// real gaps, so a gap point is a clean miss (not the nearest button).
int hitTestActionBar(int px, int py, const ActionBarRect& bar,
const std::vector<ClusterSpec>& clusters, const ActionBarSpec& spec);
} // namespace reasampler
src/actions.cpp
-1016
View File
File diff suppressed because it is too large Load Diff
src/actions.h
-92
View File
@@ -1,92 +0,0 @@
#pragma once
// actions — the Design View action family (Phase D4). Registers the bindable
// actions that drive the mode workflow and wires them end-to-end: toggle/activate
// a mode, tag/untag/show-both the current track selection. Each action mutates the
// session's ViewModeModel (D1, via persist's ReaSamplerSession) and then reapplies
// the active mode through the view shell (D2) so the change takes effect immediately.
//
// REAPER-facing shell: the .cpp includes reaper_plugin_functions.h WITHOUT
// REAPERAPI_IMPLEMENT (main.cpp owns the API pointers — CLAUDE.md §contract). This
// header is SDK-free; main.cpp calls register/handle/unregister and nothing else.
//
// Split out of main.cpp (rather than inlined there) to match CONTEXT.md's planned
// `actions` module and keep main.cpp's entrypoint focused on API-pointer ownership
// and lifecycle. The reapply-on-open glue stays in main.cpp (it owns the timer that
// drives persist.poll()); this module only registers and services the actions.
// Forward-declared at GLOBAL scope (matches reaper_plugin.h's typedef struct
// reaper_plugin_info_t) so this header stays SDK-free; the .cpp includes the real
// definition. Declared before the namespace so it is the global type, not a
// namespace-local shadow.
struct reaper_plugin_info_t;
namespace reasampler {
class ReaSamplerSession;
// Registers the Design View action family against `rec` (command_id + gaccel +
// hookcommand-routing is owned by the caller's single hookcommand). `session` is the
// live session the actions mutate; it must outlive the registration. Idempotent is
// NOT promised — call exactly once at load, mirror-unregister once at unload.
void designViewRegisterActions(reaper_plugin_info_t* rec, ReaSamplerSession* session);
// Services one fired command. Returns true iff `command` is one of this module's
// action ids (and it was handled); false otherwise so the caller's hookcommand keeps
// looking (per the contract: claim only our own ids). Safe to call for any command.
bool designViewHandleCommand(int command);
// Mirror-unregisters everything designViewRegisterActions registered, with the
// '-'-prefixed strings (per the contract's unload rule). Call once on rec==nullptr.
void designViewUnregisterActions(reaper_plugin_info_t* rec);
// --- Multi-bank action family (Phase B3) -----------------------------------
// The bindable action set that drives the multi-bank workflow: create / rename /
// delete / evacuate a bank, activate a bank (direct pool/design-free + cycle), move /
// copy the panel's selected samples into a bank, and the two vertical-split
// full-height toggles. Every mutating action drives the B1 model on
// g_session.book() and persists via g_session.saveToActiveProject() so the change
// travels with the .rpp; the toggles flip the B4-rendered layout bit on the panel.
//
// Same registration/routing/unload contract as the Design View family above and the
// same shared g_session. Kept a distinct trio (not folded into the Design View one)
// because the two families are orthogonal pillars — but they share the single
// hookcommand main.cpp owns; each family's Handle claims only its own ids.
// Registers the multi-bank family against `rec`. `session` is the live session (must
// outlive registration). Call exactly once at load. Shares g_session with the Design
// View family — pass the SAME session pointer.
void bankRegisterActions(reaper_plugin_info_t* rec, ReaSamplerSession* session);
// Services one fired command for the multi-bank family. True iff it was one of this
// family's ids (and handled); false otherwise so the caller's hookcommand keeps
// looking. Safe for any command.
bool bankHandleCommand(int command);
// Mirror-unregisters the multi-bank family with '-'-prefixed strings. Call once on
// rec==nullptr (before g_session is torn down).
void bankUnregisterActions(reaper_plugin_info_t* rec);
// The registered command id for the "Prune bank folder" action (Phase R, R3), or 0 before
// registration. The bank_panel prune button fires the action THROUGH this id via
// Main_OnCommand (fork R-E: the button dispatches the command, it does not call the session
// directly) so the panel affordance and the bindable action share one guarded code path.
int bankPruneCommandId();
// Persists a completed bank-index verb as a single REAPER undo point (R-B).
// Wraps persistBook() (= SetProjExtState) in a Begin/End block with UNDO_STATE_MISCCFG
// so the bank op is one Ctrl-Z. On an unsaved / no-active project persistBook() no-ops
// and the block is closed with an empty label + zero flag (REAPER discards it). Callers
// must invoke this ONLY after a successful/effective mutation — rejected ops (duplicate
// name, un-deletable pool, etc.) must return before reaching here so no empty undo
// point is ever opened for a no-op. Defined in actions.cpp alongside persistBook().
//
// S9 bank-generation bump: pass `bumpGeneration = true` for a verb that changes what a live
// instance would PLAY — move / copy / remove / evacuate / delete-with-members (a sample left,
// arrived, or dropped out of a bank an instance may reference). Leave it false (the default)
// for a PURELY ORGANIZATIONAL verb — create / rename / activate / reorder — which changes no
// existing (bankId, sampleId) -> content mapping, so no instance need refresh. The bump (when
// requested) happens INSIDE the block, BEFORE persistBook(), so the stamped counter rides the
// same ext-state write and undo captures the pre/post generation with the rest of the blob.
void persistBankOp(const char* label, bool bumpGeneration = false);
} // namespace reasampler
src/app/CLAUDE.md
+35
View File
@@ -0,0 +1,35 @@
# src/app — REAPER extension entry point
## Scope
Contains only `main.cpp`. Since the Phase Q hoists (Q-W3 onward), this TU is ONLY
pointers + entry + dispatch — the actual capture/panel/persist/action orchestration
lives in `shell/`. `main.cpp` owns: receiving REAPER's dispatch struct
(`ReaperPluginEntry`), resolving the REAPER API function pointers
(`REAPERAPI_LoadAPI`), the globals other files reference via `extern` (`g_hInst`,
`g_rec`), the `ReaSamplerSession` instance, its own bindable-action family via the
Q-W6 data-driven registration table (`shell/actions/action_registry`), and invoking
the other action families' (`design_view` / `bank` / `ingest`) own
register/handle/unregister triples at load and unload.
Exactly **one** translation unit defines `REAPERAPI_IMPLEMENT` — that is `main.cpp`.
Every other `.cpp` includes `reaper_plugin_functions.h` without the define and gets
`extern` declarations for the global API function pointers.
See root `CLAUDE.md`'s "REAPER extension contract" section for the full four-step
action-registration contract (`command_id` / `gaccel` / `hookcommand` / unload
mirror-unregister) that both this file's own action-table rows and the other
families' register/handle/unregister triples follow.
## Modules
- `main.cpp` — the REAPER extension's entry point and the sole `REAPERAPI_IMPLEMENT` TU; see root `CLAUDE.md`'s "REAPER extension contract" section for the registration contract this file implements.
## Gotchas
- This is intentionally a thin TU post-Phase-Q. Adding a new bindable action to
`main.cpp`'s own family means adding one row to its `ActionTableRow` table and a
flat handler function — do not hand-roll a parallel register/hookcommand/unregister
mechanism alongside the table.
- Never let a second `.cpp` define `REAPERAPI_IMPLEMENT` — that would double-allocate
the global REAPER API function pointers.
src/app/CMakeLists.txt
+122
View File
@@ -0,0 +1,122 @@
# The REAPER extension — a loadable module REAPER dlopen()s, never linked against. Paths
# below are rooted at src/, not relative to this directory.
# No core/ TU is ever compiled into this source list; every core/ TU enters through a link edge
# instead. Compiling one here too would give it its own copy, built under this target's own
# compile definitions and include dirs — free to diverge from the library copy every other
# consumer (the <module>_tests targets, reasampler_vst) links, with nothing to detect it.
add_library(reaper_reasampler MODULE
${REASAMPLER_SRC_DIR}/app/main.cpp
${REASAMPLER_SRC_DIR}/shell/capture/capture.cpp
${REASAMPLER_SRC_DIR}/shell/capture/capture_orchestrator.cpp
${REASAMPLER_SRC_DIR}/shell/capture/capture_batch.cpp
${REASAMPLER_SRC_DIR}/shell/capture/bake_land.cpp
${REASAMPLER_SRC_DIR}/shell/capture/bake_landing.cpp
${REASAMPLER_SRC_DIR}/shell/capture/scope_resolve.cpp
${REASAMPLER_SRC_DIR}/shell/capture/render_selection.cpp
${REASAMPLER_SRC_DIR}/shell/capture/render_isolation.cpp
${REASAMPLER_SRC_DIR}/shell/capture/render_bounds_gate.cpp
${REASAMPLER_SRC_DIR}/shell/capture/render_in_place.cpp
${REASAMPLER_SRC_DIR}/shell/capture/realtime_lifecycle.cpp
${REASAMPLER_SRC_DIR}/shell/capture/capture_realtime_shell.cpp
${REASAMPLER_SRC_DIR}/shell/capture/capture_realtime_finalize.cpp
${REASAMPLER_SRC_DIR}/shell/persist/session.cpp
${REASAMPLER_SRC_DIR}/shell/persist/ext_state_io.cpp
${REASAMPLER_SRC_DIR}/shell/persist/prune_fs.cpp
${REASAMPLER_SRC_DIR}/shell/bank_ops/bank_ops.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_audition.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_bank_ops.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_drag.cpp
${REASAMPLER_SRC_DIR}/shell/panel/footer_input.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_input.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_layout.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_render.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_thumbnails.cpp
${REASAMPLER_SRC_DIR}/shell/panel/panel_window.cpp
# draw_kit is compiled into each module rather than being a static library — see root
# CMakeLists.txt's LICE_SRC comment for why.
${REASAMPLER_SRC_DIR}/shell/panel/draw_kit.cpp
${LICE_SRC}
${REASAMPLER_SRC_DIR}/shell/capture/insert.cpp
${REASAMPLER_SRC_DIR}/shell/view/view.cpp
${REASAMPLER_SRC_DIR}/shell/view/view_fx_park.cpp
${REASAMPLER_SRC_DIR}/shell/view/view_solo.cpp
${REASAMPLER_SRC_DIR}/shell/capture/track_guid.cpp
${REASAMPLER_SRC_DIR}/shell/capture/provenance_shell.cpp
${REASAMPLER_SRC_DIR}/shell/capture/item_read.cpp
${REASAMPLER_SRC_DIR}/shell/actions/action_registry.cpp
${REASAMPLER_SRC_DIR}/shell/actions/design_view_actions.cpp
${REASAMPLER_SRC_DIR}/shell/actions/bank_actions.cpp
${REASAMPLER_SRC_DIR}/shell/actions/prune_action.cpp
${REASAMPLER_SRC_DIR}/shell/actions/package_export_action.cpp
${REASAMPLER_SRC_DIR}/shell/actions/ingest.cpp
${REASAMPLER_SRC_DIR}/shell/actions/arrange_drop_win.cpp
${REASAMPLER_SRC_DIR}/shell/actions/drag_out_win.cpp
${REASAMPLER_SRC_DIR}/shell/actions/instrument_drop_win.cpp
${REASAMPLER_SRC_DIR}/shell/actions/insert_fx_action.cpp
${REASAMPLER_SRC_DIR}/shell/persist/usage_scan.cpp
)
target_link_libraries(reaper_reasampler PRIVATE json wire file_bytes bank_model capture_paths capture_name peaks bank_grid mode_switch tab_strip view_mode_model view_tree guid_diff lane_keys solo_cache insert_plan render_settings render_window track_topology batch_capture tail_control capture_realtime bank_book wav_codec origin_ledger tracking_authority prune_reconcile prune_button app_version provenance drag_out instrument_drop theme component_geometry action_bar footer_bar overflow_menu mode_enable insert_fx_enable tooltip card_meta card_drag assignment_request bank_sync sample_usage bake_wire resample_name export_bank package_pickers)
# NOT linked here, deliberately: sampler_core / pitch_shift / the filter / limiter. The
# instrument renders its own bake in its own process, which is what keeps the extension's
# link graph free of the voice engine — a link edge to it here means the design drifted.
target_include_directories(reaper_reasampler PRIVATE ${SDK_INC} ${WDL_INC})
# The park surface's decisions are pure (header-inline, no REAPER types), so they are
# CTest-covered like a core/ module: the snapshot trust test, the refusal message and
# its once-per-changed-set gate, and the apply's undo-point fold. Declared here rather
# than in a src/shell/view/CMakeLists.txt because that directory deliberately has none
# — its TUs are compiled into this target directly. view_mode_model is linked for
# makeParkPlan, the flag set the trust test folds over; pinning that against hand-built
# ops would not catch a change to the planner.
reasampler_test(view_fx_park LINK fx_offline view_mode_model)
# Bank-package import: the promptless verb plus its action skin. Kept as its own
# appended block rather than merged into the lists above, so the two package
# directions stay textually independent.
target_sources(reaper_reasampler PRIVATE
${REASAMPLER_SRC_DIR}/shell/package/import_bank.cpp
${REASAMPLER_SRC_DIR}/shell/actions/package_import_action.cpp)
target_link_libraries(reaper_reasampler PRIVATE import_landing package_pickers)
# OUTPUT_NAME is channel-derived; the CMake target name stays "reaper_reasampler" for both
# configs, since REAPER dlopen's any reaper_* module and the two channels' artifacts load
# side-by-side. LIBRARY_OUTPUT_DIRECTORY pins the module to the top of the build tree even
# though this target is declared in a subdirectory — the install step copies it from there.
# ARCHIVE_OUTPUT_DIRECTORY pins the same for MODULE targets: CMake emits an import-lib
# sidecar (.lib/.exp on MSVC) keyed off ARCHIVE_OUTPUT_DIRECTORY, not LIBRARY_OUTPUT_DIRECTORY,
# so it needs pinning too even though nothing links against this import lib.
set_target_properties(reaper_reasampler PROPERTIES
PREFIX ""
OUTPUT_NAME "${REASAMPLER_OUTPUT_NAME}"
LIBRARY_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}"
ARCHIVE_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}")
if(WIN32)
# Native Win32; REAPER provides nothing extra to link. The bank-panel dialog template
# is compiled from resource.rc by the platform RC compiler.
target_sources(reaper_reasampler PRIVATE ${REASAMPLER_SRC_DIR}/resource.rc)
elseif(APPLE)
# Use REAPER's OWN SWELL at runtime via the modstub. Do NOT build full SWELL —
# SWELL_PROVIDED_BY_APP routes calls to the host.
target_sources(reaper_reasampler PRIVATE ${SWELL}/swell-modstub.mm)
target_compile_definitions(reaper_reasampler PRIVATE SWELL_PROVIDED_BY_APP)
target_link_libraries(reaper_reasampler PRIVATE "-framework AppKit")
set_target_properties(reaper_reasampler PROPERTIES SUFFIX ".dylib")
# SWELL can't read a Win32 .rc directly. Run resgen once to turn resource.rc into a
# C++ source, then add it here:
# php ${WDL_INC}/swell/mac_resgen.php src/resource.rc
# target_sources(reaper_reasampler PRIVATE ${REASAMPLER_SRC_DIR}/resource.rc_mac_dlg.h)
else()
# Linux: REAPER's libSwell.so is used at runtime via the generic modstub. With
# SWELL_PROVIDED_BY_APP you can drop pkg-config / -lX11 entirely.
target_sources(reaper_reasampler PRIVATE ${SWELL}/swell-modstub-generic.cpp)
target_compile_definitions(reaper_reasampler PRIVATE SWELL_PROVIDED_BY_APP)
set_target_properties(reaper_reasampler PROPERTIES SUFFIX ".so")
# Reuse the macOS resgen output (see CLAUDE.md, SWELL dialog resources), then add the
# generated source:
# php ${WDL_INC}/swell/mac_resgen.php src/resource.rc
# target_sources(reaper_reasampler PRIVATE ${REASAMPLER_SRC_DIR}/resource.rc_mac_dlg.h)
endif()
src/app/main.cpp
+369
View File
@@ -0,0 +1,369 @@
// main.cpp — the SINGLE translation unit that OWNS the REAPER API pointers.
//
// REAPER dlopen()s reaper_*.dll|dylib|so from UserPlugins/ and calls the exported
// ReaperPluginEntry, handing over `rec` (rec->GetFunc resolves API pointers,
// rec->Register plugs our callbacks in). Exactly ONE .cpp defines
// REAPERAPI_IMPLEMENT (this one) — that allocates storage for the global API
// pointers every other TU gets `extern`. Never let a second TU define it.
//
// This TU is ONLY pointers + entry + dispatch. Its own action family registers
// through the data-driven table below (buildMainActionTable + action_registry) —
// adding a bindable action means adding ONE row and its handler function (OCP). The
// design_view / bank / ingest families keep their own register/handle/unregister
// triples, called from entry.
#define REAPERAPI_IMPLEMENT
#include "reaper_plugin.h"
#include "reaper_plugin_functions.h"
#include <cstddef>
#include <string>
#include <vector>
#include "core/capture/render_settings.h" // captureActionTable
#include "core/version/app_version.h" // appVersion
#include "shell/actions/ingest.h"
#include "shell/actions/action_registry.h" // the registration table
#include "shell/actions/bank_actions.h" // multi-bank action family
#include "shell/actions/design_view_actions.h" // Design View action family
#include "shell/actions/insert_fx_action.h" // insert-as-FX action body
#include "shell/actions/package_export_action.h" // bank-package export action body
#include "shell/actions/package_import_action.h" // bank-package import action body
#include "core/wire/bake_wire.h" // kBakeActionSuffix (the shared action id)
#include "shell/capture/bake_land.h" // resample-bake landing action body
#include "shell/capture/capture_batch.h" // batch + recapture action bodies
#include "shell/capture/capture_orchestrator.h" // single-capture / realtime / insert action bodies
#include "shell/capture/realtime_lifecycle.h" // in-flight realtime state + tick driver
#include "shell/capture/render_in_place.h" // render-in-place action body
#include "shell/panel/panel_input.h" // bankPanelRefresh / bankPanelNotifyProjectLoaded
#include "shell/panel/panel_window.h" // panel lifecycle (init/toggle/open-query/shutdown)
#include "shell/persist/session.h" // ReaSamplerSession
#include "shell/view/view.h" // reconcileManagedLanes / applyMode
namespace capture = reasampler::capture;
// Globals other files reference via `extern`.
REAPER_PLUGIN_HINSTANCE g_hInst = nullptr;
reaper_plugin_info_t* g_rec = nullptr;
// Retired command-id SUFFIXES: kept ONLY to mirror-unregister on unload so a user's
// stale keybindings are cleaned up. Never re-register these. The four-mode WET ids,
// the removed master scope/realtime actions, and the removed per-action tail variants
// (tail is now a panel toggle, not a paired action).
static const char* const kRetiredCaptureCmdSuffixes[] = {
"CAPTURE_TRACKS_WET",
"CAPTURE_ITEMS_WET",
"CAPTURE_RAZOR_WET",
"CAPTURE_MASTER",
"CAPTURE_MASTER_REALTIME",
"CAPTURE_ITEM_TAIL",
"CAPTURE_TRACK_TAIL",
};
// Owns the in-memory BankModel and bridges it to project ext state. A timer tick
// drives g_session.poll() to detect project load / Save-As; capture adds Samples to
// g_session.bank() (resolves to the active bank's index), and we serialize the book
// back into the active project's ext state (the `banks` key) so it travels with the .rpp.
static reasampler::ReaSamplerSession g_session;
// Command id of the TOGGLE_BANK_PANEL row, resolved from the table once at load so
// OnToggleAction's checked-state poll is a single int compare (no per-poll lookup).
static int g_cmdToggleBankPanel = 0;
// Each handler is a thin stateless routing shim: (session, per-row arg) -> the
// action body in shell/capture/ or shell/panel/, existing only so table rows can be
// plain data with flat function pointers.
// `arg` is the captureActionTable() row index — the table rows below are built by
// iterating that pure taxonomy, so the routing stays 1:1 by construction.
static void RunCaptureScopeRow(int arg) {
capture::RunCapture(g_session,
capture::captureActionTable()[static_cast<std::size_t>(arg)]);
}
static void RunToggleBankPanel(int) { reasampler::bankPanelToggle(); }
static void RunCaptureItemAssign(int) { capture::RunCaptureItemAssign(g_session); }
// `arg` != 0 is the EXPLICIT conform-to-project-tempo opt-in (never silent); 0
// inserts at native length.
static void RunInsertSelected(int arg) {
capture::RunInsertSelected(g_session, arg != 0);
}
// Placement of the PLAYER, not of an item: adds a ReaSampler 9000 to the selected track's
// FX chain. Sessionless — it reads the panel's selection, exactly like the drag it mirrors.
static void RunInsertAsFx(int) { reasampler::doInsertAsFx(); }
static void RunBatchCaptureItems(int) { capture::RunBatchCaptureItems(g_session); }
static void RunBatchCaptureRazor(int) { capture::RunBatchCaptureRazor(g_session); }
static void RunCaptureRealtime(int) { capture::RunCaptureRealtimeTrack(g_session); }
static void RunCancelRealtime(int) { capture::RunCancelRealtime(g_session); }
static void RunRecaptureFromSource(int) { capture::RunRecaptureFromSource(g_session); }
static void RunRenderTrackInPlace(int) { capture::RunRenderTrackInPlace(g_session); }
static void RunResampleBake(int) { capture::RunResampleBake(g_session); }
static void RunExportBankPackage(int) { reasampler::doBankPackageExport(g_session, g_session.book().activeBankId()); }
static void RunImportBankPackage(int) { reasampler::doImportBankPackage(g_session); }
static void RunShowVersion(int) {
// On-demand only — no unconditional startup print (routine console chatter pops
// the console window).
ShowConsoleMsg(("ReaSampler " + reasampler::version::appVersion() + "\n").c_str());
}
// ONE row per bindable action this TU owns: FOREVER-STABLE id suffix, Actions-list
// phrase, handler, per-row arg. Registration, hookcommand dispatch, and the unload
// mirror-unregister all iterate this data. The capture scope rows come first,
// sourced from the pure captureActionTable() taxonomy; the rest are this TU's singles.
static std::vector<reasampler::ActionTableRow> buildMainActionTable() {
using reasampler::ActionTableRow;
std::vector<ActionTableRow> rows;
const auto& cap = capture::captureActionTable();
for (std::size_t i = 0; i < cap.size(); ++i)
rows.push_back(ActionTableRow{cap[i].commandSuffix, cap[i].descriptionPhrase,
&RunCaptureScopeRow, static_cast<int>(i)});
// Show/hide the docked bank panel (display-only; never captures/inserts).
rows.push_back({"TOGGLE_BANK_PANEL", "toggle bank panel", &RunToggleBankPanel});
rows.push_back({"CAPTURE_ITEM_ASSIGN",
"capture selected item into bank + assign to active instance",
&RunCaptureItemAssign});
// Two variants differing ONLY in InsertOptions — native length vs conform opt-in.
rows.push_back({"INSERT_SELECTED", "insert selected sample at edit cursor",
&RunInsertSelected, 0});
rows.push_back({"INSERT_SELECTED_CONFORM",
"insert selected sample at edit cursor (conform to tempo)",
&RunInsertSelected, 1});
// A LOAD_*, not an INSERT_*: INSERT_SELECTED/_CONFORM place a timeline item;
// this loads an instrument onto a track's FX chain. The id is permanent, so
// keeping the two apart here is the most durable statement of which verb this is.
rows.push_back({"LOAD_INSTRUMENT_ON_TRACK",
"insert selected sample as ReaSampler 9000 on the selected track",
&RunInsertAsFx});
// One action fires N captures (per selected item / per razor area); the original
// selection is restored on every exit path. Bank-only, never places.
rows.push_back({"CAPTURE_BATCH_ITEMS",
"batch capture selected items (one per item)",
&RunBatchCaptureItems});
rows.push_back({"CAPTURE_BATCH_RAZOR", "batch capture razor areas (one per area)",
&RunBatchCaptureRazor});
// Realtime sibling of the offline CAPTURE_TRACK scope, plus its cancel-in-flight
// companion (stop + restore, non-destructive).
rows.push_back({"CAPTURE_TRACK_REALTIME", "capture selected track (realtime)",
&RunCaptureRealtime});
rows.push_back({"CANCEL_REALTIME_CAPTURE", "cancel realtime capture",
&RunCancelRealtime});
rows.push_back({"RECAPTURE_FROM_SOURCE", "re-capture from source",
&RunRecaptureFromSource});
// A RENDER_*, not a CAPTURE_*: the id is permanent and is the most durable
// statement the codebase makes about which pillar a feature belongs to.
rows.push_back({"RENDER_TRACK_IN_PLACE",
"render selected track to a new track (source moves to Design)",
&RunRenderTrackInPlace});
// Invoked by a ReaSampler 9000 instance over the VST3 host bridge (and bindable, so a
// stranded request can be landed by hand). The suffix is the wire contract itself —
// core/wire/bake_wire owns the spelling both artifacts read.
rows.push_back({reasampler::wire::kBakeActionSuffix,
"land pending ReaSampler 9000 resample bake",
&RunResampleBake});
rows.push_back({"EXPORT_BANK_PACKAGE", "export active bank as package",
&RunExportBankPackage});
rows.push_back({"IMPORT_BANK_PACKAGE", "import bank package (.rsbank)",
&RunImportBankPackage});
rows.push_back({"SHOW_VERSION", "show version", &RunShowVersion});
return rows;
}
// The timer callback REAPER runs periodically (registered via "timer"). It only
// forwards to the session poll — cheap per tick (reads the active project id and
// its .rpp path, acts only on a change).
static void OnTimer()
{
// Advance any in-flight realtime capture FIRST, so a project switch is caught and
// torn down/restored before session.poll() reacts to that switch. LOAD-BEARING:
// the idle fast-path is a SINGLE POINTER TEST — drive only when a capture is live.
if (capture::g_rtCapture) capture::DriveRealtimeCapture(g_session);
// poll()'s undo/redo-reload and project-switch Load branches call
// loadFromProject, replacing g_session.view() wholesale — deferred here while
// an applyMode is on the stack (reachable if a pumped message loop re-enters
// this timer mid-apply), same retry-next-tick shape as the consume guard below.
// Deferred WHOLE, not just the reload branches: poll()'s identity tracking is
// cheap to skip for one tick and resumes correctly, unlatched, on the next.
if (!reasampler::modeApplyInProgress()) g_session.poll();
// persist stays MODEL-ONLY (loads the saved view model but does not apply
// visibility, to avoid coupling persist to the view shell); poll() raises a
// one-shot load signal that we drain here to reapply the SAVED active mode so a
// project saved in Design mode parks Arrange tracks automatically. The same
// signal re-arms the bank panel's new-content detector — notified BEFORE the
// reapply so re-arm and model restore ride the one load event (otherwise
// pre-existing tracks can be mis-detected as "new" and mass-tagged).
// modeApplyInProgress is tested BEFORE the consume, not after the applyMode call:
// the load signal is one-shot, a re-entered applyMode fails closed, and a reapply
// dropped here is the saved mode never applied at all. Holding the whole block
// back one tick also keeps the panel re-arm ahead of the reapply.
if (!reasampler::modeApplyInProgress() && g_session.consumeLoadSignal()) {
reasampler::bankPanelNotifyProjectLoaded();
// Reconcile lane ownership against the live project's lanes (P_LANENAME,
// the cross-session source of truth) BEFORE reapplying visibility. Never
// re-mints, never mass-tags.
reasampler::reconcileManagedLanes(g_session.view(), nullptr);
reasampler::applyMode(g_session.view(), g_session.view().activeModeId(), nullptr);
}
reasampler::bankPanelRefresh(); // cheap fingerprint compare; no-op when unchanged/closed
}
// A Ctrl-Z/Ctrl-Shift-Z rolls back/forward the "reasampler" project ext state on disk
// but keeps the SAME project identity, so the timer's identity poll never re-reads
// ext state on undo/redo — the in-memory book/view would stay stale until
// close+reopen. REAPER's projectconfig fires BeginLoadProjectState on every
// project-state (re)load INCLUDING undo/redo (isUndo == true for both); we hook it.
//
// TIMING: BeginLoadProjectState fires BEFORE any state restore, so reading
// GetProjExtState here would return the PRE-undo value. Instead we raise a one-shot
// reload request that OnTimer's poll() drains on the NEXT tick, once REAPER has
// finished restoring the <EXTSTATE> block. A normal project open also fires this
// (isUndo=false); ignored here so a normal open flows solely through the timer's
// identity-transition Load path (no double load).
static void OnBeginLoadProjectState(bool isUndo, project_config_extension_t* /*reg*/)
{
if (isUndo)
g_session.requestReload();
}
// Intentional no-ops: ReaSampler stores state via project EXT STATE, not this
// extension's own project lines. The struct is registered ONLY for the
// BeginLoadProjectState undo/redo notification.
static bool OnProcessExtensionLine(const char* /*line*/, ProjectStateContext* /*ctx*/,
bool /*isUndo*/, project_config_extension_t* /*reg*/)
{
return false; // we own no project lines — ext state carries our data
}
static void OnSaveExtensionConfig(ProjectStateContext* /*ctx*/, bool /*isUndo*/,
project_config_extension_t* /*reg*/)
{
}
// Storage must outlive registration — REAPER holds this pointer until we unregister it.
static project_config_extension_t g_projectConfig{
&OnProcessExtensionLine,
&OnSaveExtensionConfig,
&OnBeginLoadProjectState,
nullptr, // userData
};
// REAPER calls this for every action fired in the MAIN section; claim only our own id,
// return false otherwise so REAPER keeps looking. This TU's own family dispatches through
// the registration table; the other families claim their own ids after it.
static bool OnHookCommand(int command, int /*flag*/)
{
if (command == 0) return false;
if (reasampler::actionTableHandleCommand(command)) return true;
if (reasampler::designViewHandleCommand(command)) return true;
if (reasampler::bankHandleCommand(command)) return true;
if (reasampler::ingestHandleCommand(command)) return true;
return false;
}
// "hookcommand" covers the main section only, so actions we published into another
// section arrive here instead. Partitioning contract: root `CLAUDE.md` §"REAPER
// extension contract".
static bool OnHookCommand2(KbdSectionInfo* /*sec*/, int command, int /*val*/, int /*val2*/,
int /*relmode*/, HWND /*hwnd*/)
{
if (command == 0) return false;
return reasampler::ingestHandleSectionCommand(command);
}
// REAPER polls this to render each of OUR actions' checked state in menus/toolbars.
// Return 1 (on) / 0 (off) for ids we own, -1 for everything else (per the contract).
static int OnToggleAction(int command)
{
if (command != 0 && command == g_cmdToggleBankPanel)
return reasampler::bankPanelIsOpen() ? 1 : 0;
return -1; // not ours / non-toggling
}
extern "C" REAPER_PLUGIN_DLL_EXPORT int REAPER_PLUGIN_ENTRYPOINT(
REAPER_PLUGIN_HINSTANCE hInstance, reaper_plugin_info_t* rec)
{
if (!rec)
{
// rec == nullptr => REAPER is UNLOADING us.
if (g_rec)
{
// Abort any in-flight realtime capture FIRST, while the API pointers are
// still live, so we never leave a temp track, an armed track, or an
// altered transport/cursor in the user's project on unload.
capture::AbortRealtimeCaptureForUnload(g_session);
g_rec->Register("-timer", (void*)&OnTimer);
g_rec->Register("-projectconfig", (void*)&g_projectConfig);
g_rec->Register("-toggleaction", (void*)&OnToggleAction);
g_rec->Register("-hookcommand", (void*)&OnHookCommand);
g_rec->Register("-hookcommand2", (void*)&OnHookCommand2);
reasampler::designViewUnregisterActions(g_rec);
reasampler::bankUnregisterActions(g_rec);
reasampler::ingestUnregisterActions(g_rec);
// This TU's own family, reverse table order; each '-command_id'
// re-presents the SAME interned pointer used at register.
reasampler::unregisterActionTable(g_rec);
// Retire the REMOVED command ids (command_id only — we never held a gaccel
// for them this session).
for (const char* suffix : kRetiredCaptureCmdSuffixes)
g_rec->Register("-command_id", (void*)reasampler::channelIdFor(suffix));
}
// Before dropping the API pointers: DockWindowRemove/DestroyWindow need them live.
reasampler::bankPanelShutdown();
g_rec = nullptr;
return 0;
}
// ABI guard: the struct layout we compiled against must match this REAPER.
if (rec->caller_version != REAPER_PLUGIN_VERSION)
return 0;
// Resolve every REAPER API function pointer. Returns the number that FAILED
// to load; 0 == success. Non-zero usually means REAPER is older than our SDK.
if (REAPERAPI_LoadAPI(rec->GetFunc) != 0)
return 0;
g_hInst = hInstance;
g_rec = rec;
// Point the bank panel at the live session BEFORE registering its action, so a
// toggle firing immediately has a session to read. Does not open the window.
reasampler::bankPanelInit(&g_session);
{
const std::vector<reasampler::ActionTableRow> rows = buildMainActionTable();
reasampler::registerActionTable(rec, rows.data(), rows.size());
}
// The panel toggle renders a checked state — resolve its minted id once and
// register the toggleaction hook that reports it.
g_cmdToggleBankPanel = reasampler::actionTableCommandId("TOGGLE_BANK_PANEL");
if (g_cmdToggleBankPanel)
rec->Register("toggleaction", (void*)&OnToggleAction);
// Each family mints its own command_id + gaccel, shares g_session, and is routed
// by the same hookcommand below. Registered before the hook so every id is
// minted first.
reasampler::designViewRegisterActions(rec, &g_session);
reasampler::bankRegisterActions(rec, &g_session);
reasampler::ingestRegisterActions(rec, &g_session);
rec->Register("hookcommand", (void*)&OnHookCommand);
rec->Register("hookcommand2", (void*)&OnHookCommand2);
// Drives project-load / Save-As detection: the timer polls the active project
// each tick; on a project load it reloads the bank from ext state, on a Save-As
// it relocates the bank folder under the new .rpp.
rec->Register("timer", (void*)&OnTimer);
// An UNDO/REDO state restore reloads the session's book + view from the restored
// ext state. The timer's identity poll cannot see an undo (same project
// identity), so this hook owns it (see OnBeginLoadProjectState).
rec->Register("projectconfig", (void*)&g_projectConfig);
return 1; // success — REAPER keeps us loaded
}
src/app_version.h
-202
View File
@@ -1,202 +0,0 @@
#pragma once
// app_version — the REAPER-free version-identity core (Phase V, V1 + V4). The single
// source of truth for the version STRING lives in CMake (a `REASAMPLER_VERSION`
// variable threaded in via configure_file -> version_generated.h); this module
// re-exports it as the canonical constant and owns every pure operation on it: the
// exact-string render, the parse/compare arithmetic a within-channel forward
// migration will lean on, and the "which version wrote this project" result that
// persist reads back from ext state (absent stamp = pre-versioning, never an error).
//
// V4 (beta-in-isolation) extends this module into the SINGLE SOURCE OF TRUTH FOR
// CHANNEL IDENTITY too. A compile-time flag (`-DREASAMPLER_CHANNEL=beta`, threaded
// through the same configure_file'd version_generated.h as REASAMPLER_CHANNEL_IS_BETA)
// selects stable (the default, absent-flag build — byte-for-byte today's identity) or
// a fully isolated beta build. Every channel-qualified identity string the shells
// register with REAPER — the display suffix, the ext-state namespace, the command-id
// prefix, the Actions-list name prefix, the binary/dock idents — is DERIVED HERE from
// the one channel bit, so no scattered #ifdef forks live across the translation units;
// the shells just consume these accessors. This keeps "what makes a beta a beta" one
// auditable definition and makes the channel-derived rendering unit-testable.
//
// PURE MODULE: NO REAPER types, NO SWELL, NO vendor/ includes. Standard library
// only. Builds and unit-tests without REAPER (mirror of bank_model / tail_control).
//
// Leading-zero fidelity (V1, Daniel-fixed): the displayed/stamped string preserves the
// configured version EXACTLY as written — padded and unpadded versions are both
// legitimate (e.g. "0.9.8" and "0.9.80" are different versions; a "0.9.01" renders its
// zero-padded patch verbatim). That exactness is why the version STRING is the
// authoritative artifact (sourced verbatim from the one CMake variable), not a
// reconstruction from numeric components — CMake's `project(VERSION)` may normalize a
// numeric patch field, so we never round-trip the string through integers to render it.
// Guarded against reconstruct-from-components regressions in app_version.cpp by
// app_version_padding_tests (the padded canary build). The canary does NOT guard
// against the CMakeLists.txt source-of-truth line being changed to a CMake variable
// derivation — that case is guarded by the comment block at the top of CMakeLists.txt.
#include <optional>
#include <string>
namespace reasampler {
// --- Channel identity (V4, beta-in-isolation) ---------------------------------------
//
// The build channel, fixed at compile time by REASAMPLER_CHANNEL_IS_BETA (0 = stable,
// the default absent-flag build; 1 = beta, from -DREASAMPLER_CHANNEL=beta). Stable is
// today's build with byte-identical identity in EVERY string below — any divergence on
// the stable channel is a defect. Beta forks every identity so a beta binary coexists
// with stable in one REAPER (both are dlopen'd at startup) without colliding on project
// ext-state, keybindings, or any REAPER-global registration.
enum class Channel { Stable, Beta };
// The channel this build was compiled for. Constant per binary.
Channel channel();
// True on the beta build only. Convenience over channel() == Channel::Beta.
bool isBeta();
// The user-visible version render. Stable: EXACTLY the configured CMake string. Beta:
// that string plus a plain "-beta" suffix — a plain suffix, NOT a git-describe
// decoration (V2, Daniel-fixed). This is what the show-version action and the
// bank-panel readout display. It is NOT the ext-state stamp value (see stampVersion).
const std::string& appVersion();
// The ext-state STAMP value — the writing-version recorded into a saved project. This is
// the NUMERIC TRIPLE ONLY (the configured string, no channel suffix) on BOTH channels:
// it deliberately carries NO channel suffix, so (a) parseVersion classifies it as
// Stamped when its own channel reads it back (a "-beta"-suffixed stamp would classify
// as Unknown — the V4 stamp-classifiability requirement), and (b) stable's stamp value
// is byte-identical regardless of the channel build. The channel is carried by the
// ISOLATED namespace (see extStateNamespace), never baked into the stamp. Distinct from
// appVersion() precisely so the display can say "-beta" while the stamp stays
// classifiable and stable-identical.
const std::string& stampVersion();
// The project ext-state namespace this channel reads and writes. Stable: "reasampler"
// (byte-identical to the pre-V4 build). Beta: "reasampler_beta". FOREVER-STABLE per
// channel once shipped — changing either orphans every already-saved project's state.
//
// ISOLATION SEMANTICS (V4, accepted — not a bug): a channel reads/writes ONLY its own
// namespace. A project saved by stable shows empty/default ReaSampler state when opened
// in beta, and vice versa. There is NO cross-namespace read, migration, or fallback in
// this wave — that isolation is the safety property (a beta can never read or rewrite a
// stable project's bank/view/tail state).
const std::string& extStateNamespace();
// The FOREVER-STABLE command-id prefix every bindable action mints its id from. Stable:
// "CEREBELLUM_REASAMPLER_" (byte-identical to the shipped ids). Beta:
// "CEREBELLUM_REASAMPLER_BETA_", a DISTINCT forever-family so beta and stable actions
// never collide in REAPER's one Actions list and their keybindings stay independent.
// Callers concatenate their per-action suffix onto this (e.g. prefix + "CAPTURE_TRACK").
// PERMANENT once a beta ships — mark any minted id FOREVER-STABLE like stable's.
const std::string& commandIdPrefix();
// The Actions-list DISPLAY-NAME prefix, so two coexisting channels are distinguishable in
// REAPER's Actions list. Stable: "ReaSampler: " (unchanged). Beta: "ReaSampler beta: ".
// Callers build a gaccel desc as actionDisplayPrefix() + "capture selected track", etc.
const std::string& actionDisplayPrefix();
// The binary/module OUTPUT NAME base. Stable: "reaper_reasampler". Beta:
// "reaper_reasampler_beta". Mirrors the CMake OUTPUT_NAME (which is the authoritative
// artifact name); exposed here for any in-binary self-identification. REAPER dlopen's
// any reaper_* module, so both channels load side-by-side.
const std::string& binaryName();
// The docked bank-panel identity strings, channel-qualified so the two panels are
// distinguishable and do not fight over one persisted dock slot (a REAPER-global
// collision surface — DockWindowAddEx's identstr keys the saved dock position).
// dockTitle() — the visible dock tab title. Stable: "ReaSampler Bank".
// Beta: "ReaSampler Bank beta".
// dockIdent() — the persisted dock-position ident. Stable: "reasampler_bank_panel".
// Beta: "reasampler_bank_panel_beta". FOREVER-STABLE per channel.
const std::string& dockTitle();
const std::string& dockIdent();
// --- VST3 instrument identity (S18, beta-in-isolation) ------------------------------
//
// The ReaSampler 9000 VST3 instrument forks its plugin identity per channel exactly as the
// extension forks its binary/dock idents above — one channel per binary, all derived from
// the ONE channel bit here, so the VST shell carries no #ifdef fork. These are the VST's
// analogues of binaryName()/dockTitle(): the on-disk module name and the human-facing name.
//
// vstOutputName() — the CMake OUTPUT_NAME base for the .vst3 module. Stable:
// "reasampler_9000" (byte-identical to pre-S18). Beta:
// "reasampler_9000_beta". Mirrors the CMake target's OUTPUT_NAME (the
// authoritative artifact name); exposed here so the one derivation lives
// in this module. FOREVER-STABLE per channel — the on-disk filename a
// REAPER project's saved instance path may reference.
// vstPluginName() — the factory display name (FX browser), editor title band, and S6
// embed-strip label. Stable: "ReaSampler 9000". Beta:
// "ReaSampler 9000 beta". Sourced from here, never a literal in
// reasampler_vst.h / vst_entry.cpp / the editor / the embed strip.
//
// NOTE: the VST3 CLASS UID is NOT here — a UID is not a string derivation but a compile-time
// FUID/INLINE_UID constant the factory needs in brace-init form; it lives in reasampler_vst.h,
// channel-selected by the same REASAMPLER_CHANNEL_IS_BETA bit. This module owns the string
// identity; reasampler_vst.h owns the binary UID identity. The version display the factory
// stamps into PClassInfo2 reuses appVersion() (it already renders "-beta" on beta) — no
// separate VST version accessor.
const std::string& vstOutputName();
const std::string& vstPluginName();
// --- Channel-qualified action id / name builders ------------------------------------
//
// The two composition helpers every action-registering shell (main.cpp, actions.cpp)
// funnels through, so command ids and Actions-list names are qualified IDENTICALLY on
// every channel from ONE definition — no shell re-implements the concatenation.
//
// channelCommandId(suffix): commandIdPrefix() + suffix. `suffix` is the per-action tail
// WITHOUT the family prefix (e.g. "CAPTURE_TRACK", "SHOW_VERSION"). Stable yields the
// exact shipped id ("CEREBELLUM_REASAMPLER_CAPTURE_TRACK"); beta yields the isolated
// forever-family id ("CEREBELLUM_REASAMPLER_BETA_CAPTURE_TRACK"). FOREVER-STABLE per
// channel — a suffix, once shipped, is as permanent as the prefix.
// channelActionName(phrase): actionDisplayPrefix() + phrase. `phrase` is the action's
// human description WITHOUT the "ReaSampler: " lead (e.g. "capture selected track(s)").
// Stable yields "ReaSampler: capture selected track(s)"; beta prefixes "ReaSampler beta: "
// so the two channels' actions are distinguishable in one Actions list.
std::string channelCommandId(const std::string& suffix);
std::string channelActionName(const std::string& phrase);
// A parsed semver triple. Kept minimal — major.minor.patch as integers, for ORDERING
// only. It deliberately does NOT round-trip back to the display string (the leading
// zero is a rendering concern owned by the authoritative string, not reconstructable
// from the integer patch). parseVersion returns nullopt on malformed input.
struct Version {
int major = 0;
int minor = 0;
int patch = 0;
};
// Parse "x.y.z" (each component a non-negative integer, leading zeros allowed) into a
// Version. Returns nullopt on anything malformed: wrong component count, non-digits, a
// leading `-`, empty components, or trailing garbage. Used for ordering two stamps and
// for validating a stored stamp before comparing.
std::optional<Version> parseVersion(const std::string& s);
// Numeric ordering by (major, minor, patch). a < b iff a precedes b. So
// 0.9.01 < 0.9.02 < 0.10.01 (numeric compare, NOT lexicographic — 10 > 9).
bool versionLess(const Version& a, const Version& b);
// The writing-version a project was last saved with, recovered from its ext-state
// stamp. A project saved before this feature shipped has NO stamp — that is the
// explicit `preVersioning` case (kind), not an error and not a warning. A present-but-
// malformed value is `unknown` (also silent — a corrupt stamp is ignored, never
// throws). A well-formed value is `stamped` and carries the exact stored string plus
// its parsed triple for comparison.
struct WritingVersion {
enum class Kind {
PreVersioning, // no stamp stored — a project written before versioning shipped
Unknown, // a stamp was stored but is not parseable — ignored, not an error
Stamped, // a well-formed stamp
};
Kind kind = Kind::PreVersioning;
std::string raw; // the exact stored string (empty for PreVersioning)
Version parsed; // meaningful only when kind == Stamped
};
// Classify a raw stored stamp value (exactly what GetProjExtState returned for the
// version key). Empty -> PreVersioning; non-empty but unparseable -> Unknown; parseable
// -> Stamped. Pure so the three-way classification is test-pinned; persist calls this
// with the raw ext-state read and never has to reason about the cases itself.
WritingVersion classifyWritingVersion(const std::string& rawStamp);
} // namespace reasampler
src/assignment_request.cpp
-147
View File
@@ -1,147 +0,0 @@
// assignment_request.cpp — see assignment_request.h. Pure: standard library only.
#include "assignment_request.h"
#include <cstddef>
#include <limits>
namespace reasampler {
namespace {
constexpr const char* kMagic = "rsassign1";
// Append one length-prefixed field: <decimal-len> ':' <bytes>. Mirror of
// provenance's putField so the two seams share one wire idiom.
void putField(std::string& out, const std::string& field) {
out += std::to_string(field.size());
out += ':';
out += field;
}
// Cursor over the encoded string. All reads are bounds-checked; a short read fails
// the whole parse (ok_ latches false). Mirror of provenance's Cursor, trimmed to the
// three field kinds this record needs.
class Cursor {
public:
explicit Cursor(const std::string& s) : s_(s) {}
bool ok() const { return ok_; }
bool atEnd() const { return pos_ >= s_.size(); }
// Reads one length-prefixed field into `out`. Fails on a missing ':', an empty or
// non-numeric length, a length that overflows SIZE_MAX, or a length that runs past
// the end. The digit count is capped at 20 (the decimal width of SIZE_MAX on a
// 64-bit host) so a crafted 200-digit length cannot accumulate past SIZE_MAX via
// repeated multiply. "never UB" promise from the header is upheld here.
bool field(std::string& out) {
if (!ok_) return false;
const std::size_t colon = s_.find(':', pos_);
if (colon == std::string::npos) return fail();
if (colon == pos_) return fail(); // empty length token
// Cap: SIZE_MAX fits in at most 20 decimal digits; a longer run is bogus.
if (colon - pos_ > 20u) return fail();
std::size_t len = 0;
for (std::size_t i = pos_; i < colon; ++i) {
const char c = s_[i];
if (c < '0' || c > '9') return fail();
const std::size_t digit = static_cast<std::size_t>(c - '0');
// Overflow guard: if len would exceed SIZE_MAX after multiply+add, fail.
if (len > (std::numeric_limits<std::size_t>::max() - digit) / 10u)
return fail();
len = len * 10u + digit;
}
const std::size_t start = colon + 1;
// Guard: start may equal s_.size() (empty remainder), in which case only len==0
// is valid; start > s_.size() cannot happen (colon < s_.size() by find()).
// Use subtraction-first form to avoid start+len wrapping on a huge len.
if (start > s_.size() || len > s_.size() - start) return fail();
out.assign(s_, start, len);
pos_ = start + len;
return true;
}
// Reads a length-prefixed field and parses it as a signed 64-bit decimal (an
// optional leading '-'). Fails on empty, non-digit, trailing bytes, or a value
// that would overflow INT64_MAX / underflow INT64_MIN. The digit count is capped
// at 19 (the decimal width of INT64_MAX, plus 1 for the optional sign = 20
// characters maximum) so a crafted 21-digit field cannot accumulate UB. "never UB"
// promise from the header is upheld: all arithmetic is done on positive digits
// and capped before applying the sign.
bool fieldInt64(std::int64_t& out) {
std::string f;
if (!field(f)) return false;
if (f.empty()) return fail();
std::size_t i = 0;
bool neg = false;
if (f[0] == '-') {
neg = true;
i = 1;
if (f.size() == 1) return fail(); // bare "-"
}
// Cap at 19 digits (INT64_MAX = 9223372036854775807 — 19 digits). A 20-digit
// positive value would overflow INT64_MAX; a 20-digit negative might be valid
// (INT64_MIN = -9223372036854775808) but we conservatively reject it too: the
// generation field is a unix timestamp, never near INT64 limits in practice.
if (f.size() - i > 19u) return fail();
std::int64_t v = 0;
for (; i < f.size(); ++i) {
const char c = f[i];
if (c < '0' || c > '9') return fail();
const std::int64_t digit = static_cast<std::int64_t>(c - '0');
// Overflow guard: v * 10 + digit must not exceed INT64_MAX.
if (v > (std::numeric_limits<std::int64_t>::max() - digit) / 10)
return fail();
v = v * 10 + digit;
}
out = neg ? -v : v;
return true;
}
// Consumes an exact literal at the cursor (the magic tag). Fails if absent.
bool literal(const char* lit) {
if (!ok_) return false;
std::size_t i = 0;
for (; lit[i] != '\0'; ++i) {
if (pos_ + i >= s_.size() || s_[pos_ + i] != lit[i]) return fail();
}
pos_ += i;
return true;
}
private:
bool fail() {
ok_ = false;
return false;
}
const std::string& s_;
std::size_t pos_ = 0;
bool ok_ = true;
};
} // namespace
std::string encodeAssignmentRequest(const AssignmentRequest& req) {
std::string out = kMagic;
putField(out, req.bankId);
putField(out, req.sampleId);
putField(out, std::to_string(req.generation));
return out;
}
std::optional<AssignmentRequest> decodeAssignmentRequest(const std::string& wire) {
Cursor cur(wire);
if (!cur.literal(kMagic)) return std::nullopt;
AssignmentRequest req;
if (!cur.field(req.bankId)) return std::nullopt;
if (!cur.field(req.sampleId)) return std::nullopt;
if (!cur.fieldInt64(req.generation)) return std::nullopt;
// Reject trailing garbage: a well-formed value ends exactly at the last field.
if (!cur.ok() || !cur.atEnd()) return std::nullopt;
return req;
}
} // namespace reasampler
src/assignment_request.h
-89
View File
@@ -1,89 +0,0 @@
#pragma once
// assignment_request — the pure core of the S8 ingest assignment-request seam.
//
// PURE MODULE (CLAUDE.md §load-bearing split): NO REAPER types, NO SWELL, NO VST3,
// NO vendor/ includes. Standard library only. Unit-tested outside the DAW — the same
// "small pure type + length-prefixed round-trip" pattern as provenance / owned_manifest.
//
// -- What it is --------------------------------------------------------------
//
// When the EXTENSION ingests a sample (S8: arrange capture / Media-Explorer import /
// drop-onto-panel) it writes an ASSIGNMENT REQUEST to its own "reasampler" ext-state
// namespace: "the active sampler instance should now play THIS sample." The value
// names the ingested sample by (bankId, sampleId) plus a monotonic `generation` the
// reader compares to decide the request is NEW (a fresh ingest, even of the same id).
//
// This module owns ONLY the value's WIRE FORMAT — build/parse round-trip. Writing it
// to ext-state is the persist shell's job; READING it is the instrument's job in a
// LATER dispatch (S8 instrument-side follow-up, after S10 merges). This is why the
// format is documented here in the header, not just in code: the reader lands elsewhere
// and must decode exactly what this writer produced.
//
// -- The data-ownership boundary (load-bearing) ------------------------------
//
// The EXTENSION writes this; the instrument only READS it. That does not violate the
// instrument's read-only-over-the-bank rule: the assignment request is the extension
// writing its OWN namespace (a request FROM the extension TO the instrument), never the
// instrument writing back into the bank. The instrument, on reading a new generation,
// updates its OWN component-state selection (the same selection S4 persists) and reloads.
//
// -- Why `generation` -------------------------------------------------------
//
// Instances reference sample IDs, so re-assigning the SAME id (e.g. a recapture, or a
// re-drop of the same file) would be indistinguishable from a stale value without a
// changing field. `generation` is a monotonic disambiguator (the ingest writer supplies
// a wall-clock unix-epoch stamp today — see the writer shell) so the reader can tell
// "assigned again just now" from "already saw this." It is DELIBERATELY the same shape
// the S9 bank-generation counter will use, but it is NOT that counter — S9 is a separate
// point; this field is self-contained to the request and does not depend on S9 landing.
#include <cstdint>
#include <optional>
#include <string>
namespace reasampler {
// One assignment request: the ingested sample's identity + a monotonic disambiguator.
// bankId — the bank the sample was ingested into (the active/target bank).
// sampleId — the ingested Sample's stable id (BankIndex key).
// generation — a monotonic value the reader compares to detect a NEW request. The
// writer supplies a unix-epoch-seconds stamp; the reader treats it as an
// opaque "did this change?" token, not a wall-clock it interprets.
struct AssignmentRequest {
std::string bankId;
std::string sampleId;
std::int64_t generation = 0;
bool operator==(const AssignmentRequest& o) const {
return bankId == o.bankId && sampleId == o.sampleId &&
generation == o.generation;
}
bool operator!=(const AssignmentRequest& o) const { return !(*this == o); }
};
// Encode an assignment request to the wire string. Length-prefixed fields behind a
// magic+version tag ("rsassign1"), so arbitrary bytes in an id (a GUID, a display-
// derived id) round-trip whole with no escaping ambiguity — the same idiom provenance
// uses. Deterministic: the same request always yields the same string.
//
// FORMAT (documented for the LATER instrument-side reader):
// "rsassign1" <len>':'<bankId> <len>':'<sampleId> <len>':'<generation-decimal>
// where each <len> is the decimal byte length of the field that follows the ':'.
std::string encodeAssignmentRequest(const AssignmentRequest& req);
// Parse a wire string produced by encodeAssignmentRequest. std::nullopt on any
// malformed / truncated / trailing-garbage input (never UB, never a partial value) —
// the reader shell treats absence/malformed as "no pending request." Round-trips:
// decodeAssignmentRequest(encodeAssignmentRequest(x)) == x.
//
// READER REQUIREMENT (instrument-side, S8 follow-up dispatch): after successfully
// decoding a request, the reader MUST verify that (bankId, sampleId) resolves to an
// existing sample before acting on it. An undo on the extension side rolls back the
// `banks` ext-state key (removing the sample) but cannot atomically clear the
// `assign_request` key if the write happened outside the undo block. Even with the
// undo-grouping fix (Major 2), the reader must guard against this: treat an
// unresolvable (bankId, sampleId) pair as a stale/no-op request and discard it
// silently, never crashing or selecting a nonexistent entry.
std::optional<AssignmentRequest> decodeAssignmentRequest(const std::string& wire);
} // namespace reasampler
src/bank_book.cpp
-1109
View File
File diff suppressed because it is too large Load Diff
src/bank_book.h
-457
View File
@@ -1,457 +0,0 @@
#pragma once
// bank_book — the pure core of the multi-bank phase (Phase B), deliberately free
// of any REAPER type so it compiles and unit-tests OUTSIDE the DAW. It is the
// third instance of the same "pure registry + JSON round-trip, unit-tested outside
// the DAW" pattern as bank_model and view_mode_model.
//
// PURE MODULE (CLAUDE.md §load-bearing split): NO REAPER types, NO SWELL, NO
// vendor/ includes. Standard library only.
//
// -- What it is --------------------------------------------------------------
//
// An ordered registry of banks. Each bank = { stable id, display name, ordinal,
// BankIndex }. The book WRAPS N BankIndex instances — bank_model / BankIndex are
// UNTOUCHED (additive: no bankId on Sample). Movement of samples between banks is
// index-only (remove from source's BankIndex, add to destination's); files never
// relocate — banks are logical groupings over one shared file pool.
//
// -- The pool (privileged, not special-cased) --------------------------------
//
// Structurally the pool is bank-zero — one Bank among many, seeded on construction
// with a fixed id (kPoolBankId) and fixed display name (kPoolBankName), ordinal 0.
// Semantically it is privileged, and the privileges are enforced HERE in the pure
// rules layer (CONTEXT.md §Multi-bank guardrail — not deferred to a shell):
// * always exists (seeded on construction; the book never reaches zero banks)
// * un-deletable (deleteBank rejects the pool)
// * un-renamable (renameBank rejects the pool)
// * un-evacuable (evacuate rejects the pool — the pool is evacuation's
// destination, not a source)
//
// -- Id minting is the CALLER'S job (design decision) ------------------------
//
// createBank takes a caller-supplied stable id, mirroring bank_model's "id
// assigned by the caller" and view_mode_model's mode ids. The pure core has no
// REAPER genGuid / RNG and deliberately introduces none: a fake in-model id source
// would not be a real GUID anyway, and keeping ids caller-supplied lets the B2
// shell mint a genuine REAPER GUID while the model stays pure and deterministically
// testable. The model still enforces the invariants: non-empty, unique, not the
// reserved pool id.
#include <optional>
#include <string>
#include <utility>
#include <vector>
#include "bank_model.h"
namespace reasampler {
// The pool's fixed identity. The id is reserved: createBank rejects it, and the
// pool is always bank-zero. The name is fixed: renameBank rejects the pool.
inline constexpr const char* kPoolBankId = "pool";
inline constexpr const char* kPoolBankName = "Pool";
// SlotMap — the L7 gap-preserving display-position carrier for ONE bank (F2 settled:
// plain interchangeable slots, NOT M9 fixed/addressable slots). A slot is just a
// display position a sample id occupies; the map is sample id -> slot (>= 0). Gaps
// are first-class: a bank may have a sample at slot 1 with slot 0 empty (an empty
// first row above an occupied second row). At most one id per slot (a slot is never
// double-occupied) and at most one slot per id (an id sits in exactly one place).
//
// Position lives HERE, not on Sample (CLAUDE.md wrapping discipline): a copy of one
// sample into two banks may sit at different slots, so position is a per-bank display
// concern owned by the bank's membership. bank_model / Sample stay untouched.
//
// PURE: standard library only. Hard-tested to the bar of BankIndex's round-trip.
class SlotMap {
public:
// The slot an id occupies, or -1 if the id is not mapped. O(N).
int slotOf(const std::string& id) const;
// The id occupying `slot`, or "" if the slot is empty. O(N).
std::string idAt(int slot) const;
// The highest occupied slot, or -1 when the map is empty. Defines the append
// frontier and (with trailing-empty trim) the content extent.
int maxSlot() const;
// Ids in ASCENDING slot order (the deterministic display order). Empty slots
// produce no entry — the caller iterates occupants; sparse layout is a draw
// concern that reads slotOf/idAt, not this list.
std::vector<std::string> orderedIds() const;
// Places `id` at the next free slot after the last occupied one (append). If the
// id is already mapped it is first removed (leaving its old slot empty), then
// appended — an append never fills an earlier gap. No-op guard: empty id ignored.
void append(const std::string& id);
// Drops `id`'s mapping, LEAVING ITS SLOT EMPTY (no re-pack) so every other id
// keeps its position. Returns true if the id was mapped.
bool remove(const std::string& id);
// Moves `id` to `targetSlot`, gap-preserving (F3 reorder semantics):
// * target slot EMPTY -> `id` moves there; its old slot is left empty.
// * target slot OCCUPIED -> insert-before-and-shift: `id` takes targetSlot and
// every occupant at slot >= targetSlot (except `id` itself) shifts up by one,
// preserving their relative order and never colliding. Matches file-manager
// reorder. Interior gaps between shifted occupants are preserved as-is
// (shift is +1 on each occupant, so the gap structure above the target is kept).
// * negative targetSlot is clamped to 0.
// Returns false (no mutation) if `id` is not mapped. Deterministic.
bool reorder(const std::string& id, int targetSlot);
// Rebuilds the map densely from `ids` in the given order (slot i = ids[i]),
// dropping any prior state. The migration path: a pre-L7 bank with no persisted
// slot data is seeded from its BankIndex insertion order, densely packed (no gaps),
// so it is visually identical on first post-L7 load. Empty/duplicate ids skipped.
void resetDense(const std::vector<std::string>& ids);
// Drops any mapping whose id is NOT in `liveIds` (a stale marker whose sample left
// the index) and appends any live id that has NO mapping yet (a sample the index
// gained out-of-band). Slots of surviving ids are untouched (gaps preserved). Keeps
// the map consistent with the bank's membership without a re-pack. Deterministic:
// orphan appends follow `liveIds` order.
void reconcile(const std::vector<std::string>& liveIds);
bool empty() const { return entries_.empty(); }
std::size_t size() const { return entries_.size(); }
bool operator==(const SlotMap& o) const;
// JSON fragment (an array of {id, slot} objects, ascending slot). Emitted as the
// bank envelope's "slots" member by BankBook::serialize; parsed back by its parser.
// Round-trips losslessly with the rest of the bank.
std::string serialize() const;
// Builds a map from explicit (id, slot) pairs parsed from persisted JSON. Enforces
// the map invariants defensively against a hand-edited blob: a duplicate id keeps
// its FIRST occurrence; a slot already taken by a kept id drops the later pair
// (never double-occupies); an empty id or negative slot is dropped. The result is
// sorted ascending by slot. reconcile() against live membership runs afterward, so
// a lossy repair here degrades gracefully rather than corrupting lookup.
static SlotMap fromEntries(const std::vector<std::pair<std::string, int>>& pairs);
private:
struct Entry {
std::string id;
int slot = 0;
bool operator==(const Entry& o) const { return id == o.id && slot == o.slot; }
};
std::vector<Entry> entries_; // kept sorted ascending by slot (invariant)
void sortBySlot();
};
// One bank: a stable id, a display name, an ordinal (tab/display order), and its
// own BankIndex. The pool is the bank whose id == kPoolBankId.
struct Bank {
std::string id; // stable, persisted; the pool's is kPoolBankId
std::string displayName; // mutable for named banks; fixed "Pool" for the pool
int ordinal = 0; // display order; pool is 0, named banks 1..N
BankIndex index; // this bank's samples
SlotMap slots; // L7 display positions of this bank's samples (gap-preserving)
bool isPool() const { return id == kPoolBankId; }
bool operator==(const Bank& o) const {
return id == o.id && displayName == o.displayName &&
ordinal == o.ordinal && index == o.index && slots == o.slots;
}
};
// Outcome of a cross-bank sample move/copy. Mirrors AddResult's honesty: the op
// reports what happened rather than silently mutating on a bad request.
// - Moved / Copied: the sample was transferred to the destination as a new entry.
// - Collapsed: the destination already held the hash; it collapsed onto the
// existing entry (a no-op add on the destination side). For a
// MOVE the source entry is STILL removed; for a COPY the source
// entry is (as always) retained.
// - RejectedUnknownBank: a source or destination id named no bank.
// - RejectedSampleAbsent: the sample id was not in the source bank.
// - RejectedSameBank: source and destination were the same bank (no-op).
enum class TransferResult {
Moved,
Copied,
Collapsed,
RejectedUnknownBank,
RejectedSampleAbsent,
RejectedSameBank,
};
// Scope of a sample-remove (fork R-A, settled 2026-07-24). ThisBank is the default
// and the ONLY behavior surfaced in the UI/action layer; AllBanks is a latent seam —
// live and tested at the model level, promotable later behind this parameter without
// a rewrite, but never wired to an affordance in B5.
// - ThisBank: drop the entry from the one named source bank only. A same-hash entry
// in another bank survives (no cross-bank cascade — dedup is per-bank).
// - AllBanks: drop the sample's entry from EVERY bank that holds the source id
// ("purge from the library"). Latent; unsurfaced.
enum class RemoveScope {
ThisBank,
AllBanks,
};
// Outcome of BankBook::removeSample. Mirrors TransferResult's honesty: the op reports
// what happened rather than silently mutating on a bad request.
// - Removed: at least one index entry was dropped.
// - RejectedUnknownBank: the source bank id named no bank (ThisBank scope only).
// - RejectedSampleAbsent: the sample id was in no bank in scope (nothing removed).
enum class RemoveResult {
Removed,
RejectedUnknownBank,
RejectedSampleAbsent,
};
// An ordered registry of banks with the pool seeded as bank-zero, per-bank sample
// indices, an active-bank pointer, and lossless JSON round-trip. The heart of the
// multi-bank phase — mirror of bank_model / view_mode_model.
class BankBook {
public:
BankBook(); // seeds the pool (id kPoolBankId, name kPoolBankName, ordinal 0);
// active bank = pool; zero named banks.
// -- Bank lifecycle ------------------------------------------------------
// Creates a named bank with the caller-supplied stable id and display name,
// assigning the next ordinal. Rejects (returns false, no mutation) an empty id,
// a duplicate id, the reserved pool id, or a display name that duplicates an
// existing bank's name (including the pool's "Pool"). Display-name uniqueness is
// trimmed + case-insensitive (ASCII): "Drums", "drums", and " Drums " collide.
bool createBank(const std::string& id, const std::string& displayName);
// Renames a named bank. Rejects (false, no mutation) an unknown id, the pool, or a
// target name already used by a DIFFERENT bank (trimmed + case-insensitive, as
// createBank). Renaming a bank to its own current name is a no-op success.
bool renameBank(const std::string& id, const std::string& displayName);
// Deletes a NAMED bank, removing it (and its member index entries) from the
// registry. Files are a shell/prune concern and are NOT touched here. Rejects
// (false, no mutation) an unknown id or the pool. Remaining banks' ordinals are
// compacted so the pool stays 0 and named banks stay contiguous 1..N. If the
// deleted bank was active, the active bank falls back to the pool.
bool deleteBank(const std::string& id);
// Reorders a NAMED bank to `newOrdinal` (clamped into the named-bank range),
// shifting the others to keep ordinals contiguous. The pool is pinned at 0 and
// cannot be reordered. Rejects (false, no mutation) an unknown id or the pool.
bool reorderBank(const std::string& id, int newOrdinal);
// Moves EVERY member of a named bank into the pool (index-only, observing the
// same destination-collapse-by-hash as a move), leaving the bank empty. Rejects
// (false, no mutation) an unknown id or the pool (the pool is the destination,
// never a source). Returns true on success even if the bank was already empty.
bool evacuate(const std::string& id);
// -- Active bank ---------------------------------------------------------
// The active bank's id (the capture target). Defaults to the pool.
const std::string& activeBankId() const { return activeBankId_; }
// Sets the active bank. Rejects (returns false, no change) an id that names no
// bank — an invalid set never corrupts state.
bool setActiveBank(const std::string& id);
// The active bank's BankIndex — the index the capture layer adds to. Always
// valid (the active id always names a live bank; it falls back to the pool).
BankIndex& activeIndex();
const BankIndex& activeIndex() const;
// -- Sample movement (index-only; files never relocate) ------------------
// Moves a sample by id from `fromBankId` to `toBankId`: removes it from the
// source index and adds it to the destination (observing destination
// collapse-by-hash). See TransferResult for the full outcome set.
TransferResult moveSample(const std::string& sampleId,
const std::string& fromBankId,
const std::string& toBankId);
// Copies a sample by id from `fromBankId` to `toBankId`: the source entry is
// retained, the destination gains it (observing destination collapse-by-hash).
// Same hash may then live in both banks — cross-bank dedup is NOT enforced.
TransferResult copySample(const std::string& sampleId,
const std::string& fromBankId,
const std::string& toBankId);
// -- Sample removal (index-only; the file is NEVER touched — orphaned until prune) --
// Drops a sample's index entry (the sample-level sibling of move/copy/evacuate).
// Index-only and non-destructive to the file: a last-reference remove leaves the
// file on disk, orphaned until Phase R prune — remove NEVER deletes bytes.
//
// Scope (fork R-A): ThisBank (default, the only surfaced verb) drops the entry from
// `fromBankId` alone; AllBanks (latent seam) drops the sample id from every bank
// that holds it. See RemoveResult for the outcome set.
// * ThisBank: RejectedUnknownBank if `fromBankId` names no bank; RejectedSampleAbsent
// if that bank does not hold the id; Removed on a drop.
// * AllBanks: `fromBankId` is ignored (the id is purged book-wide);
// RejectedSampleAbsent if NO bank held the id; Removed otherwise.
// No mutation occurs on any Rejected outcome (no-op guardrail for the undo layer).
RemoveResult removeSample(const std::string& sampleId,
const std::string& fromBankId,
RemoveScope scope = RemoveScope::ThisBank);
// -- Sample display order (L7; index membership untouched) ---------------
// The bank's sample ids in DISPLAY (slot) order — the deterministic order the grid
// iterates, sourced from the bank's SlotMap. Reconciles the map against live index
// membership first (drops stale markers, appends unmapped samples densely), so a
// freshly-migrated or out-of-band-mutated bank always yields a complete order. An
// unknown bank id yields an empty vector. Const-logical but reconciles lazily, so
// it is a non-const member.
std::vector<std::string> orderedSampleIds(const std::string& bankId);
// Ensures every bank's SlotMap is consistent with its index membership: seeds a
// map that has NO overlap with its index from insertion order (the pre-L7 migration
// default — dense, no gaps), and reconciles a partially-populated map (drop stale,
// append unmapped). Idempotent. Called after deserialize and after any capture/
// transfer that added samples out-of-band of the L7 reorder path.
void reconcileSlots();
// Reorders sample `id` within `bankId` to `targetSlot` (gap-preserving; see
// SlotMap::reorder). INDEX-ONLY of positions — the sample's membership, file, and
// metadata are untouched (capture != placement holds). Reconciles the bank's slots
// first so the target space is complete. Returns false (no mutation) on an unknown
// bank or an id the bank does not hold.
bool reorderSample(const std::string& id, const std::string& bankId, int targetSlot);
// Alt-replace (L7 F3): the dragged sample `newId` (already a member of `bankId`)
// takes the slot of the occupant `oldId`, and `oldId` is REMOVED from `bankId`'s
// index (index-only, same semantics as removeSample ThisBank — the file stays on
// disk; owned-manifest/prune govern bytes; hashReferencedElsewhere handles the
// last-reference case). Position of the slot is preserved; only its occupant changes.
//
// POOL GUARD (settled): the index-removal of `oldId` passes the SAME guard the
// remove verb applies — removeSample(oldId, bankId, ThisBank) must return Removed.
// For the pool this is permitted whenever the occupant exists (per-sample removal
// is not a pool privilege violation — the pool's guards are un-delete/rename/evacuate,
// never per-sample remove). If the removal would be rejected (occupant absent), the
// whole replace is rejected: false, NO mutation (neither the index nor the slots
// change), so the shell can fall back to the default insert-shift or a no-op.
// Rejects (false, no mutation) an unknown bank, a `newId`/`oldId` the bank does not
// hold, or `newId == oldId`. NEVER touches disk; introduces no new deletion authority.
bool replaceSample(const std::string& newId, const std::string& oldId,
const std::string& bankId);
// Refreshes a sample IN PLACE wherever it lives in the book (M10 re-capture):
// finds the bank holding `sampleId` and replaces its entry with `updated`
// (order-preserving, no dedup — see BankIndex::updateInPlace). Scans banks in
// ordinal order and updates the FIRST holder (a sample id is unique within a
// bank; the same id living in two banks via copy would update the earliest, which
// is acceptable — re-capture operates on the panel's focused single selection).
// Returns false (no mutation) if no bank holds the id or the replacement's path
// is absolute. Index-only and non-destructive to the timeline.
bool updateSampleInPlace(const std::string& sampleId, const Sample& updated);
// Reference-count query backing the confirm-on-last-reference guardrail: does any
// bank OTHER than `exceptBankId` still hold an entry whose contentHash == `hash`?
//
// Identity is the CONTENT HASH, not the file path: hash is the canonical dedup key
// the whole model already reasons in (findByHash / collapse-by-hash), and two
// entries that share content share one file — so "some other bank still references
// this hash" is exactly "removing here does not orphan the file." An EMPTY hash is
// never matched (it does not participate in dedup, mirroring findByHash), so an
// empty-hash sample reads as referenced-nowhere-else — the safe, confirm-eliciting
// direction (we cannot prove another bank shares an unhashed file).
bool hashReferencedElsewhere(const std::string& hash,
const std::string& exceptBankId) const;
// Every project-relative file path referenced by ANY bank in the book, pool
// included — the union across the whole book (Phase R, prune). This is the
// safety-critical referenced-set the prune core subtracts: a file referenced by
// any bank (INCLUDING via a copy into a second bank) appears here, so prune never
// reclaims it. Paths are returned VERBATIM (Sample.relativePath, exact strings —
// no normalization), first-seen order across banks in ordinal order then sample
// insertion order, and DE-DUPLICATED (one file referenced by N banks appears
// once). An empty relativePath is skipped (it references no file). Additive
// read-only query; adds no mutation and no coupling to Phase R.
std::vector<std::string> referencedPaths() const;
// -- Query ---------------------------------------------------------------
// The bank with `id`, or nullptr. Pointer invalidated by any mutating call.
Bank* bank(const std::string& id);
const Bank* bank(const std::string& id) const;
// The bank's BankIndex by id, or nullptr. Convenience over bank()->index.
BankIndex* index(const std::string& id);
const BankIndex* index(const std::string& id) const;
// The pool (always present). Never null.
Bank& pool();
const Bank& pool() const;
// All banks in ordinal order (pool first). The pool is always banks()[0].
const std::vector<Bank>& banks() const { return banks_; }
std::size_t size() const { return banks_.size(); } // >= 1 (the pool)
bool operator==(const BankBook& o) const {
return banks_ == o.banks_ && activeBankId_ == o.activeBankId_;
}
// -- Persistence ---------------------------------------------------------
// Serializes the whole book to a JSON string (lossless round-trip): the pool
// folded in as bank-zero + named banks + per-bank indices + ordinals + active
// id. deserialize(serialize(x)) == x.
std::string serialize() const;
// Parses a book JSON produced by serialize(). std::nullopt on malformed input.
//
// LEGACY MIGRATION: a bare legacy bank_index JSON (the pre-multi-bank shape, an
// object with a "samples" array and no "banks" key) is promoted into the pool's
// index, yielding a book of { pool } with zero named banks — one-way, lossless.
// After migration the book blob is authoritative (the caller persists the book
// shape going forward; the legacy key is retired by the B2 shell).
static std::optional<BankBook> deserialize(const std::string& json);
// Resolve a BankBook from the two persisted ext-state values a project may carry:
// the authoritative `banks` blob and the retired-but-possibly-present legacy
// `bank_index` blob. The persist shell (B2) hands both raw strings straight here so
// the load-source decision stays REAPER-free and unit-tested. Precedence:
// 1. non-empty `banksJson` present -> deserialize it (authoritative). If it is
// MALFORMED, do NOT silently fall back to the legacy blob — a corrupt `banks`
// blob is an error, not an absence; return an empty book so a stale legacy key
// can never resurrect a superseded single-bank state over a broken book.
// 2. else non-empty `legacyJson` -> deserialize it (one-way pool migration).
// 3. else (both absent/empty) -> a fresh empty book (pool only).
// Never returns nullopt: an unloadable input degrades to the empty book (matching
// the shell's existing "malformed -> ignore, start empty" behaviour), so the caller
// has one branchless install path.
static BankBook loadFromPersisted(const std::string& banksJson,
const std::string& legacyJson);
private:
std::vector<Bank> banks_; // ordinal order; banks_[0] is always the pool
std::string activeBankId_; // always names a live bank; defaults to pool
// True if a bank OTHER than `exceptId` already carries `name`'s uniqueness key
// (trimmed + case-insensitive, ASCII). Backs the create/rename uniqueness check;
// pass exceptId=id to let a bank keep (or re-case/-space) its own name.
bool displayNameTaken(const std::string& name, const std::string& exceptId) const;
// Re-sorts banks_ by ordinal (pool pinned first) and rewrites ordinals to a
// contiguous 0..N-1 so the pool is 0 and named banks are 1..N. Called after any
// structural change (create / delete / reorder).
void normalizeOrdinals();
// Replaces the book's banks with a parsed set, normalizes ordinals, and resolves
// the active bank (falling back to the pool if the id names no bank). Used only
// by deserialize; kept private so the public surface stays create/rename/etc.
void adoptBanks(std::vector<Bank>&& banks, const std::string& activeBank);
};
// The next bank id to activate when cycling the active bank forward, in ordinal
// order (the ids arrive pool-first, named 1..N, matching banks()). Wraps: the id
// after the last returns the first (pool → named → … → pool). This is the pure
// decision behind the "cycle active bank" action — the shell reads the book's
// ordered bank ids + current active id, asks for the next, and activates it.
// * empty list -> "" (nothing to cycle to)
// * single id (pool-only) -> that id (a one-bank book stays put)
// * currentBankId not present -> the first id (a sane home to jump to)
// Exposed as a free function (not a BankBook member) so it is unit-testable against
// a bare id vector without a full book. Mirror of view_mode_model's nextModeId.
std::string nextBankId(const std::vector<std::string>& orderedBankIds,
const std::string& currentBankId);
} // namespace reasampler
src/bank_grid.h
-186
View File
@@ -1,186 +0,0 @@
#pragma once
// bank_grid — the REAPER-free layout math and cache-key logic behind the docked
// bank_panel (M5, Wave A). The panel shell (bank_panel.cpp) owns the SWELL window,
// LICE drawing, and PCM reads; ALL of that is REAPER-bound and DAW-verified. What
// is NOT DAW-bound — how N sample cells tile a panel of a given pixel size, and
// the key that identifies a cached thumbnail — lives here so it is unit-tested
// outside the DAW (CLAUDE.md §load-bearing split).
//
// PURE MODULE: NO REAPER types, NO SWELL, NO vendor/ includes. Standard library
// only. Builds and unit-tests without REAPER.
#include <cstddef>
#include <cstdint>
#include <string>
#include <vector>
namespace reasampler {
// A single cell's pixel rectangle within the panel, top-left origin (SWELL/LICE
// convention). (x, y) is the top-left corner; width/height are the cell extents.
// These are the draw bounds for one sample's thumbnail; the panel draws its
// waveform envelope inside this rect (minus any internal padding it applies).
struct CellRect {
int x = 0;
int y = 0;
int width = 0;
int height = 0;
bool operator==(const CellRect& o) const {
return x == o.x && y == o.y && width == o.width && height == o.height;
}
};
// Fixed inputs that shape the grid. All in pixels. cellWidth/cellHeight are the
// TARGET cell size; the layout fits as many whole columns as the panel width
// allows (>= 1) and wraps to as many rows as N requires. gap is the pixel spacing
// between adjacent cells (and the outer margin), so cells never touch.
struct GridSpec {
int cellWidth = 120;
int cellHeight = 72;
int gap = 8;
};
// Computes the number of columns that fit in a panel of the given pixel width for
// the spec. Always >= 1 (a panel narrower than one cell still shows one column,
// clipped by the window). Pure arithmetic — the panel passes its live client
// width here and to computeCellRects.
int columnsForWidth(int panelWidth, const GridSpec& spec);
// Tiles `itemCount` cells left-to-right, top-to-bottom into a panel of the given
// pixel width, honoring the spec's cell size and gap. Returns exactly itemCount
// rects in item order (rect i is sample i). A partial last row is left-aligned
// and simply shorter — no centering, no stretching. itemCount == 0 -> empty.
// panelWidth is used only to derive the column count; the returned rects may
// extend below any fixed viewport height (the panel scrolls/clips in Wave B).
std::vector<CellRect> computeCellRects(int itemCount,
int panelWidth,
const GridSpec& spec);
// The total pixel height the grid occupies for itemCount cells at the given panel
// width and spec (top margin + rows*cellHeight + inter-row gaps + bottom margin).
// 0 when itemCount == 0. The panel uses this to know its full content height
// (scroll extent in Wave B; for Wave A it sizes the empty-vs-populated decision).
int contentHeight(int itemCount, int panelWidth, const GridSpec& spec);
// Identifies one cached thumbnail. A cached envelope is valid only while the
// sample's identity, the draw width it was computed at, and the bank generation
// it was computed under all match. Width is part of the key because the envelope
// has exactly `width` bins per channel (peaks::computeEnvelope is width-driven);
// a resized panel needs a fresh envelope. Generation lets the panel invalidate
// every entry when the bank changes (capture / project load) without diffing.
struct ThumbnailKey {
std::string sampleId;
int width = 0;
std::uint64_t generation = 0;
bool operator==(const ThumbnailKey& o) const {
return sampleId == o.sampleId && width == o.width &&
generation == o.generation;
}
};
// A stable string form of the key, suitable as a map key. Deterministic: the same
// key always yields the same string, distinct keys always differ (the sampleId is
// length-prefixed so an id containing the delimiter cannot collide with another).
std::string thumbnailKeyString(const ThumbnailKey& key);
// --- Interaction (M5 Wave B): hit-test, selection, keyboard nav --------------
//
// All REAPER-free so the panel's interaction LOGIC is unit-tested outside the DAW,
// exactly as the layout math is. The panel shell (bank_panel.cpp) reads live mouse
// coordinates / key codes / modifier state via SWELL and calls into these; it owns
// no selection arithmetic of its own.
// Hit-tests a point (SWELL/LICE top-left client coords) against a cell-rect list.
// Returns the index of the FIRST rect that contains the point, or -1 for a miss
// (a click in the inter-cell gap, the margin, or below the last row). Half-open
// bounds [x, x+width) x [y, y+height) so adjacent rects never both claim a pixel.
int hitTestCell(int px, int py, const std::vector<CellRect>& rects);
// The panel's selection state. `indices` is the selected set as a SORTED, unique
// ascending vector (deterministic for tests and for highlight iteration). `focus`
// is the cell the caret sits on — the audition/extend target — or -1 when nothing
// is focused. `anchor` is the fixed end of a shift-range (the cell a range extends
// FROM); -1 when there is no active range origin. An empty selection has focus and
// anchor both -1.
//
// Invariants (upheld by the pure mutators below, asserted in tests):
// * indices is sorted ascending with no duplicates;
// * every index (and focus/anchor when >= 0) is in [0, itemCount);
// * focus, when >= 0, is a member of indices.
struct Selection {
std::vector<int> indices;
int focus = -1;
int anchor = -1;
bool operator==(const Selection& o) const {
return indices == o.indices && focus == o.focus && anchor == o.anchor;
}
bool contains(int index) const;
bool empty() const { return indices.empty(); }
};
// Applies a mouse click on cell `index` to `current`, returning the new selection.
// Modifier semantics (standard multi-select, matching file-manager conventions):
// * plain (no modifier): select ONLY `index`; focus = anchor = index.
// * ctrl: TOGGLE `index` in/out of the set; focus = index. Anchor moves to
// index on add, and to index on remove too (a ctrl-click reseeds the
// range origin at the clicked cell). If the toggle empties the set,
// focus stays at index (the caret) but the set is empty.
// * shift: select the inclusive RANGE from `anchor` to `index` (replacing the
// set); focus = index, anchor unchanged. With no prior anchor (anchor
// == -1) shift behaves like a plain click (anchor seeds at index).
// `index` out of [0, itemCount) or itemCount <= 0 returns `current` unchanged.
// ctrl and shift together: shift takes precedence (range select), matching common
// UI; documented so the panel need not special-case it.
Selection applyClick(const Selection& current, int index, bool ctrl, bool shift,
int itemCount);
// A directional key for keyboard navigation. REAPER-free (the shell maps VK_* to
// these) so nav math is testable without SWELL. Enter/Space/Esc are NOT here: they
// drive audition, which is a shell concern (no selection math), so the shell reads
// those key codes directly.
enum class NavKey { Left, Right, Up, Down, Home, End };
// Moves the focus by one step for `key` in a grid of `cols` columns holding
// `itemCount` cells, returning the new selection. `cols` >= 1.
// * Left/Right move by one cell in linear (row-major) order; Up/Down move by
// `cols`. Movement CLAMPS at the grid ends (no wrap): Right on the last cell,
// Left on the first, Up on the top row, Down past the last cell all stay put.
// (Clamp, not wrap: wrap on a partial last row is surprising and error-prone;
// clamp is the predictable choice — flagged as the deliberate decision.)
// * Down from the second-to-last row into a column with no cell in the last row
// clamps to the last cell rather than overshooting past itemCount.
// * Without shift: the moved-to cell becomes the sole selection; focus = anchor
// = newIndex (a plain arrow reseeds the range origin).
// * With shift: focus moves to newIndex and the selection becomes the inclusive
// range from anchor to newIndex (anchor unchanged); a first shift-arrow with no
// anchor seeds the anchor at the ORIGIN cell before moving.
// * Empty selection (focus == -1): the first arrow focuses cell 0 (Home-like),
// so an arrow press on a fresh panel starts navigation predictably.
// itemCount <= 0 returns `current` unchanged.
Selection navigate(const Selection& current, NavKey key, int cols, int itemCount,
bool shift);
// --- Waveform display compression --------------------------------------------
//
// Maps a raw linear amplitude magnitude to a perceptual display fraction so
// quiet and medium content remains visible in the thumbnail.
//
// The floor below which amplitude is treated as silence (display fraction 0).
// At -60 dB, 0.001 linear magnitude maps to ~0. Tune this constant in-DAW to
// taste — it is the only knob for the compression curve.
constexpr float kDisplayFloorDb = -60.0f;
// Maps a signed linear amplitude value in [-1, 1] (a raw envelope extreme such
// as PeakBin::max or PeakBin::min) to a signed display fraction in [-1, 1].
//
// The magnitude |linear| is converted to dB, clamped to [kDisplayFloorDb, 0],
// then normalized so kDisplayFloorDb -> 0 and 0 dB -> 1. The original sign is
// re-applied so positive max values still map positive (draw up) and negative
// min values still map negative (draw down). Exact-zero input returns 0.0f
// (stays on the midline). Full-scale (|linear| == 1.0f) returns exactly ±1.0f.
float compressAmplitudeForDisplay(float linear);
} // namespace reasampler
src/bank_model.cpp
-767
View File
@@ -1,767 +0,0 @@
#include "bank_model.h"
#include <cctype>
#include <cerrno>
#include <cstdio>
#include <cstdlib>
#include <cstring>
// bank_model implementation.
//
// JSON is hand-rolled and self-contained (brief: keep the pure core
// dependency-free — no third-party JSON lib, no WDL coupling). The field set is
// a flat struct of primitives, strings, one enum, a small string array, and a
// few optionals, so a compact writer + recursive-descent parser is the simplest
// thing that works. Doubles are emitted with 17 significant digits (%.17g), the
// shortest form that round-trips every IEEE-754 double exactly, so the
// deserialize(serialize(x)) == x invariant holds bit-for-bit.
namespace reasampler {
// ---------------------------------------------------------------------------
// equality
// ---------------------------------------------------------------------------
bool SourceRange::operator==(const SourceRange& o) const {
return startSeconds == o.startSeconds && endSeconds == o.endSeconds &&
startPpq == o.startPpq && endPpq == o.endPpq;
}
bool Provenance::operator==(const Provenance& o) const {
return parentSampleId == o.parentSampleId && fxChainSnapshot == o.fxChainSnapshot;
}
bool Levels::operator==(const Levels& o) const {
return peakDb == o.peakDb && rmsDb == o.rmsDb && lufs == o.lufs;
}
bool LoopPoints::operator==(const LoopPoints& o) const {
return start == o.start && end == o.end;
}
bool Sample::operator==(const Sample& o) const {
return id == o.id && displayName == o.displayName && relativePath == o.relativePath &&
sourceMode == o.sourceMode && sourceRange == o.sourceRange &&
trackGuids == o.trackGuids && wetDry == o.wetDry &&
channelCount == o.channelCount && sampleRate == o.sampleRate &&
lengthSeconds == o.lengthSeconds && lengthBeats == o.lengthBeats &&
captureTempo == o.captureTempo &&
captureTimeSigNum == o.captureTimeSigNum &&
captureTimeSigDenom == o.captureTimeSigDenom && key == o.key &&
rootNote == o.rootNote && loop == o.loop && levels == o.levels &&
clipped == o.clipped && tier == o.tier && contentHash == o.contentHash &&
provenance == o.provenance && createdTimestamp == o.createdTimestamp;
}
// ---------------------------------------------------------------------------
// path invariant
// ---------------------------------------------------------------------------
// DECISION: reject absolute paths rather than normalize them. The pure model has
// no knowledge of the project root, so it cannot correctly relativize an absolute
// path — any "normalization" would be a guess that could point at the wrong file.
// Rejecting at the boundary is honest and deterministic; the capture backend (M3)
// is responsible for handing us an already-relative path. Covers POSIX ("/x"),
// Windows drive ("C:\x", "C:/x", "C:foo" drive-relative), and UNC ("\\host\share")
// forms. Any leading <alpha>: is rejected regardless of the character that follows —
// drive-relative paths ("C:foo.wav") resolve against the drive's current directory,
// not the project root, so they violate the relative-paths-only invariant just as
// much as "C:\foo.wav" does.
static bool isAbsolutePath(const std::string& p) {
if (p.empty()) return false;
if (p[0] == '/' || p[0] == '\\') return true; // POSIX root or UNC
if (p.size() >= 2 && std::isalpha(static_cast<unsigned char>(p[0])) && p[1] == ':')
return true; // Windows drive (C:\, C:/, C:foo, C:)
return false;
}
// ---------------------------------------------------------------------------
// BankIndex
// ---------------------------------------------------------------------------
AddResult BankIndex::add(const Sample& sample) {
if (sample.id.empty()) return AddResult::RejectedEmptyId;
if (isAbsolutePath(sample.relativePath)) return AddResult::RejectedAbsolutePath;
if (findByHash(sample.contentHash) != nullptr)
return AddResult::Collapsed;
samples_.push_back(sample);
return AddResult::Added;
}
bool BankIndex::remove(const std::string& id) {
for (auto it = samples_.begin(); it != samples_.end(); ++it) {
if (it->id == id) {
samples_.erase(it);
return true;
}
}
return false;
}
bool BankIndex::updateInPlace(const std::string& id, const Sample& updated) {
if (isAbsolutePath(updated.relativePath)) return false; // invariant still holds
for (auto& s : samples_) {
if (s.id == id) {
s = updated; // replace in place — position (insertion order) preserved
return true;
}
}
return false;
}
const Sample* BankIndex::query(const std::string& id) const {
for (const auto& s : samples_)
if (s.id == id) return &s;
return nullptr;
}
const Sample* BankIndex::findByHash(const std::string& contentHash) const {
if (contentHash.empty()) return nullptr; // empty hashes never dedup
for (const auto& s : samples_)
if (s.contentHash == contentHash) return &s;
return nullptr;
}
bool BankIndex::moveTier(const std::string& id, Tier tier) {
for (auto& s : samples_) {
if (s.id == id) {
s.tier = tier;
return true;
}
}
return false;
}
std::vector<Sample> BankIndex::byTier(Tier tier) const {
std::vector<Sample> out;
for (const auto& s : samples_)
if (s.tier == tier) out.push_back(s);
return out;
}
// ---------------------------------------------------------------------------
// JSON writer
// ---------------------------------------------------------------------------
namespace {
void writeEscaped(std::string& out, const std::string& s) {
out += '"';
for (char c : s) {
switch (c) {
case '"': out += "\\\""; break;
case '\\': out += "\\\\"; break;
case '\b': out += "\\b"; break;
case '\f': out += "\\f"; break;
case '\n': out += "\\n"; break;
case '\r': out += "\\r"; break;
case '\t': out += "\\t"; break;
default:
if (static_cast<unsigned char>(c) < 0x20) {
char buf[8];
std::snprintf(buf, sizeof(buf), "\\u%04x", static_cast<unsigned char>(c));
out += buf;
} else {
out += c;
}
}
}
out += '"';
}
std::string numToStr(double v) {
char buf[32];
std::snprintf(buf, sizeof(buf), "%.17g", v);
return buf;
}
std::string numToStr(std::int64_t v) {
char buf[32];
std::snprintf(buf, sizeof(buf), "%lld", static_cast<long long>(v));
return buf;
}
std::string numToStr(int v) { return numToStr(static_cast<std::int64_t>(v)); }
class ObjWriter {
public:
explicit ObjWriter(std::string& out) : out_(out) { out_ += '{'; }
~ObjWriter() { out_ += '}'; }
void keyRaw(const char* key, const std::string& rawValue) {
sep();
writeEscaped(out_, key);
out_ += ':';
out_ += rawValue;
}
void keyStr(const char* key, const std::string& value) {
sep();
writeEscaped(out_, key);
out_ += ':';
writeEscaped(out_, value);
}
// Begin a nested value; caller writes the value immediately after.
void keyBegin(const char* key) {
sep();
writeEscaped(out_, key);
out_ += ':';
}
private:
void sep() {
if (first_) first_ = false; else out_ += ',';
}
std::string& out_;
bool first_ = true;
};
void writeStringArray(std::string& out, const std::vector<std::string>& v) {
out += '[';
for (std::size_t i = 0; i < v.size(); ++i) {
if (i) out += ',';
writeEscaped(out, v[i]);
}
out += ']';
}
void writeSample(std::string& out, const Sample& s) {
ObjWriter w(out);
w.keyStr("id", s.id);
w.keyStr("displayName", s.displayName);
w.keyStr("relativePath", s.relativePath);
w.keyRaw("sourceMode", numToStr(static_cast<int>(s.sourceMode)));
w.keyBegin("sourceRange");
{
ObjWriter r(out);
r.keyRaw("startSeconds", numToStr(s.sourceRange.startSeconds));
r.keyRaw("endSeconds", numToStr(s.sourceRange.endSeconds));
r.keyRaw("startPpq", numToStr(s.sourceRange.startPpq));
r.keyRaw("endPpq", numToStr(s.sourceRange.endPpq));
}
w.keyBegin("trackGuids");
writeStringArray(out, s.trackGuids);
w.keyRaw("wetDry", numToStr(s.wetDry));
w.keyRaw("channelCount", numToStr(s.channelCount));
w.keyRaw("sampleRate", numToStr(s.sampleRate));
w.keyRaw("lengthSeconds", numToStr(s.lengthSeconds));
w.keyRaw("lengthBeats", numToStr(s.lengthBeats));
w.keyRaw("captureTempo", numToStr(s.captureTempo));
w.keyRaw("captureTimeSigNum", numToStr(s.captureTimeSigNum));
w.keyRaw("captureTimeSigDenom", numToStr(s.captureTimeSigDenom));
// Optionals are emitted as null when absent so present/absent round-trips.
w.keyBegin("key");
if (s.key) writeEscaped(out, *s.key); else out += "null";
// Phase S seam fields (D-B). Emitted as null when absent (same shape as `key`
// and `provenance`) so pre-Phase-S JSON — which lacks these keys entirely —
// parses to empty optionals and re-serializes without invention.
w.keyBegin("rootNote");
if (s.rootNote) out += numToStr(*s.rootNote); else out += "null";
w.keyBegin("loop");
if (s.loop) {
ObjWriter lp(out);
lp.keyRaw("start", numToStr(s.loop->start));
lp.keyRaw("end", numToStr(s.loop->end));
} else {
out += "null";
}
w.keyBegin("levels");
{
ObjWriter l(out);
l.keyRaw("peakDb", numToStr(s.levels.peakDb));
l.keyRaw("rmsDb", numToStr(s.levels.rmsDb));
l.keyRaw("lufs", numToStr(s.levels.lufs));
}
w.keyRaw("clipped", s.clipped ? "true" : "false");
w.keyRaw("tier", numToStr(static_cast<int>(s.tier)));
w.keyStr("contentHash", s.contentHash);
w.keyBegin("provenance");
if (s.provenance) {
ObjWriter p(out);
p.keyStr("parentSampleId", s.provenance->parentSampleId);
p.keyStr("fxChainSnapshot", s.provenance->fxChainSnapshot);
} else {
out += "null";
}
w.keyRaw("createdTimestamp", numToStr(s.createdTimestamp));
}
} // namespace
std::string BankIndex::serialize() const {
std::string out;
{
ObjWriter root(out);
root.keyRaw("version", numToStr(1));
root.keyBegin("samples");
out += '[';
for (std::size_t i = 0; i < samples_.size(); ++i) {
if (i) out += ',';
writeSample(out, samples_[i]);
}
out += ']';
} // root closes the object here — not deferred to function return (NRVO would
// otherwise let the caller observe `out` before the closing brace is appended)
return out;
}
// ---------------------------------------------------------------------------
// JSON parser (recursive descent). Returns false on any malformed input; never
// reads out of bounds. Only supports the subset our writer emits.
// ---------------------------------------------------------------------------
namespace {
class Parser {
public:
explicit Parser(const std::string& s) : s_(s) {}
bool parseIndex(BankIndex& out);
private:
const std::string& s_;
std::size_t pos_ = 0;
bool eof() const { return pos_ >= s_.size(); }
char peek() const { return s_[pos_]; }
void skipWs() {
while (!eof()) {
char c = s_[pos_];
if (c == ' ' || c == '\t' || c == '\n' || c == '\r') ++pos_;
else break;
}
}
bool consume(char c) {
skipWs();
if (eof() || s_[pos_] != c) return false;
++pos_;
return true;
}
bool parseString(std::string& out);
bool parseRawScalar(std::string& out); // number / true / false / null token
bool parseDouble(double& out);
bool parseInt64(std::int64_t& out);
bool parseInt(int& out);
bool parseBool(bool& out);
bool expectNullOr(bool& wasNull); // peeks for `null`; consumes if present
bool parseSample(Sample& out);
bool parseKey(std::string& key); // an object member key + ':'
bool skipValue(); // for forward-compat unknown keys
};
// Parses a JSON string literal (with the escapes our writer emits, plus \uXXXX
// for control chars). Positioned at the opening quote after whitespace.
bool Parser::parseString(std::string& out) {
skipWs();
if (eof() || s_[pos_] != '"') return false;
++pos_;
out.clear();
while (!eof()) {
char c = s_[pos_++];
if (c == '"') return true;
if (c == '\\') {
if (eof()) return false;
char e = s_[pos_++];
switch (e) {
case '"': out += '"'; break;
case '\\': out += '\\'; break;
case '/': out += '/'; break;
case 'b': out += '\b'; break;
case 'f': out += '\f'; break;
case 'n': out += '\n'; break;
case 'r': out += '\r'; break;
case 't': out += '\t'; break;
case 'u': {
// Decode a \uXXXX escape to its code point.
auto readHex4 = [&](unsigned int& cp) -> bool {
if (pos_ + 4 > s_.size()) return false;
cp = 0;
for (int i = 0; i < 4; ++i) {
char h = s_[pos_++];
cp <<= 4;
if (h >= '0' && h <= '9') cp |= static_cast<unsigned>(h - '0');
else if (h >= 'a' && h <= 'f') cp |= static_cast<unsigned>(h - 'a' + 10);
else if (h >= 'A' && h <= 'F') cp |= static_cast<unsigned>(h - 'A' + 10);
else return false;
}
return true;
};
unsigned int hi = 0;
if (!readHex4(hi)) return false;
unsigned int codePoint = hi;
if (hi >= 0xD800 && hi <= 0xDBFF) {
// High surrogate — must be followed by \uDC00–\uDFFF.
if (pos_ + 6 > s_.size()) return false;
if (s_[pos_] != '\\' || s_[pos_ + 1] != 'u') return false;
pos_ += 2;
unsigned int lo = 0;
if (!readHex4(lo)) return false;
if (lo < 0xDC00 || lo > 0xDFFF) return false; // unpaired high surrogate
codePoint = 0x10000 + ((hi - 0xD800) << 10) + (lo - 0xDC00);
} else if (hi >= 0xDC00 && hi <= 0xDFFF) {
return false; // unpaired low surrogate — malformed
}
// Encode codePoint as UTF-8.
if (codePoint <= 0x7F) {
out += static_cast<char>(codePoint);
} else if (codePoint <= 0x7FF) {
out += static_cast<char>(0xC0 | (codePoint >> 6));
out += static_cast<char>(0x80 | (codePoint & 0x3F));
} else if (codePoint <= 0xFFFF) {
out += static_cast<char>(0xE0 | (codePoint >> 12));
out += static_cast<char>(0x80 | ((codePoint >> 6) & 0x3F));
out += static_cast<char>(0x80 | (codePoint & 0x3F));
} else {
out += static_cast<char>(0xF0 | (codePoint >> 18));
out += static_cast<char>(0x80 | ((codePoint >> 12) & 0x3F));
out += static_cast<char>(0x80 | ((codePoint >> 6) & 0x3F));
out += static_cast<char>(0x80 | (codePoint & 0x3F));
}
break;
}
default: return false;
}
} else {
out += c;
}
}
return false; // unterminated string
}
// Reads a bare token (number, true, false, null) up to the next structural char.
bool Parser::parseRawScalar(std::string& out) {
skipWs();
std::size_t start = pos_;
while (!eof()) {
char c = s_[pos_];
if (c == ',' || c == '}' || c == ']' || c == ' ' || c == '\t' ||
c == '\n' || c == '\r')
break;
++pos_;
}
if (pos_ == start) return false;
out.assign(s_, start, pos_ - start);
return true;
}
bool Parser::parseDouble(double& out) {
std::string tok;
if (!parseRawScalar(tok)) return false;
const char* b = tok.c_str();
char* end = nullptr;
errno = 0;
double v = std::strtod(b, &end);
if (end != b + tok.size()) return false;
if (errno == ERANGE) return false; // overflow / underflow → malformed
out = v;
return true;
}
bool Parser::parseInt64(std::int64_t& out) {
std::string tok;
if (!parseRawScalar(tok)) return false;
const char* b = tok.c_str();
char* end = nullptr;
errno = 0;
long long v = std::strtoll(b, &end, 10);
if (end != b + tok.size()) return false;
if (errno == ERANGE) return false; // overflow → malformed
out = static_cast<std::int64_t>(v);
return true;
}
bool Parser::parseInt(int& out) {
std::int64_t v = 0;
if (!parseInt64(v)) return false;
out = static_cast<int>(v);
return true;
}
bool Parser::parseBool(bool& out) {
std::string tok;
if (!parseRawScalar(tok)) return false;
if (tok == "true") { out = true; return true; }
if (tok == "false") { out = false; return true; }
return false;
}
// If the next value is the `null` token, consumes it and sets wasNull=true.
// Otherwise leaves the position untouched and sets wasNull=false. Returns false
// only on eof.
bool Parser::expectNullOr(bool& wasNull) {
skipWs();
if (eof()) return false;
if (s_.compare(pos_, 4, "null") == 0) {
pos_ += 4;
wasNull = true;
} else {
wasNull = false;
}
return true;
}
bool Parser::parseKey(std::string& key) {
if (!parseString(key)) return false;
if (!consume(':')) return false;
return true;
}
// Skips one JSON value (object / array / string / scalar) for forward-compat
// with keys we don't recognize. Assumes position is at the start of the value.
bool Parser::skipValue() {
skipWs();
if (eof()) return false;
char c = s_[pos_];
if (c == '"') {
std::string tmp;
return parseString(tmp);
}
if (c == '{' || c == '[') {
char open = c, close = (c == '{') ? '}' : ']';
++pos_;
int depth = 1;
while (!eof() && depth > 0) {
char d = s_[pos_];
if (d == '"') {
std::string tmp;
if (!parseString(tmp)) return false;
continue;
}
if (d == open) ++depth;
else if (d == close) --depth;
++pos_;
}
return depth == 0;
}
std::string tmp;
return parseRawScalar(tmp);
}
bool Parser::parseSample(Sample& s) {
if (!consume('{')) return false;
skipWs();
if (consume('}')) return true; // empty object (shouldn't happen, but valid)
do {
std::string key;
if (!parseKey(key)) return false;
if (key == "id") {
if (!parseString(s.id)) return false;
} else if (key == "displayName") {
if (!parseString(s.displayName)) return false;
} else if (key == "relativePath") {
if (!parseString(s.relativePath)) return false;
} else if (key == "sourceMode") {
int v = 0;
if (!parseInt(v)) return false;
// Valid range: MasterMix(0) .. Realtime(5).
if (v < static_cast<int>(SourceMode::MasterMix) ||
v > static_cast<int>(SourceMode::Realtime))
return false;
s.sourceMode = static_cast<SourceMode>(v);
} else if (key == "sourceRange") {
if (!consume('{')) return false;
do {
std::string rk;
if (!parseKey(rk)) return false;
double dv = 0.0;
if (!parseDouble(dv)) return false;
if (rk == "startSeconds") s.sourceRange.startSeconds = dv;
else if (rk == "endSeconds") s.sourceRange.endSeconds = dv;
else if (rk == "startPpq") s.sourceRange.startPpq = dv;
else if (rk == "endPpq") s.sourceRange.endPpq = dv;
} while (consume(','));
if (!consume('}')) return false;
} else if (key == "trackGuids") {
if (!consume('[')) return false;
skipWs();
if (!consume(']')) {
do {
std::string g;
if (!parseString(g)) return false;
s.trackGuids.push_back(g);
} while (consume(','));
if (!consume(']')) return false;
}
} else if (key == "wetDry") {
if (!parseDouble(s.wetDry)) return false;
} else if (key == "channelCount") {
if (!parseInt(s.channelCount)) return false;
} else if (key == "sampleRate") {
if (!parseInt(s.sampleRate)) return false;
} else if (key == "lengthSeconds") {
if (!parseDouble(s.lengthSeconds)) return false;
} else if (key == "lengthBeats") {
if (!parseDouble(s.lengthBeats)) return false;
} else if (key == "captureTempo") {
if (!parseDouble(s.captureTempo)) return false;
} else if (key == "captureTimeSigNum") {
if (!parseInt(s.captureTimeSigNum)) return false;
} else if (key == "captureTimeSigDenom") {
if (!parseInt(s.captureTimeSigDenom)) return false;
} else if (key == "key") {
bool wasNull = false;
if (!expectNullOr(wasNull)) return false;
if (wasNull) {
s.key.reset();
} else {
std::string k;
if (!parseString(k)) return false;
s.key = k;
}
} else if (key == "rootNote") {
bool wasNull = false;
if (!expectNullOr(wasNull)) return false;
if (wasNull) {
s.rootNote.reset();
} else {
int v = 0;
if (!parseInt(v)) return false;
// Valid MIDI note range: 0..127 inclusive (boundaries valid).
if (v < 0 || v > 127) return false;
s.rootNote = v;
}
} else if (key == "loop") {
bool wasNull = false;
if (!expectNullOr(wasNull)) return false;
if (wasNull) {
s.loop.reset();
} else {
if (!consume('{')) return false;
LoopPoints lp;
do {
std::string lk;
if (!parseKey(lk)) return false;
std::int64_t lv = 0;
if (!parseInt64(lv)) return false;
if (lk == "start") lp.start = lv;
else if (lk == "end") lp.end = lv;
} while (consume(','));
if (!consume('}')) return false;
// Invariant: 0 <= start <= end. start == end is a valid zero-length
// marker; a negative index or start > end is malformed, not silently
// clamped (mirrors the enum-range rejection above).
if (lp.start < 0 || lp.end < lp.start) return false;
s.loop = lp;
}
} else if (key == "levels") {
if (!consume('{')) return false;
do {
std::string lk;
if (!parseKey(lk)) return false;
double dv = 0.0;
if (!parseDouble(dv)) return false;
if (lk == "peakDb") s.levels.peakDb = dv;
else if (lk == "rmsDb") s.levels.rmsDb = dv;
else if (lk == "lufs") s.levels.lufs = dv;
} while (consume(','));
if (!consume('}')) return false;
} else if (key == "clipped") {
if (!parseBool(s.clipped)) return false;
} else if (key == "tier") {
int v = 0;
if (!parseInt(v)) return false;
// Valid range: Scratch(0) .. Archive(1).
if (v < static_cast<int>(Tier::Scratch) ||
v > static_cast<int>(Tier::Archive))
return false;
s.tier = static_cast<Tier>(v);
} else if (key == "contentHash") {
if (!parseString(s.contentHash)) return false;
} else if (key == "provenance") {
bool wasNull = false;
if (!expectNullOr(wasNull)) return false;
if (wasNull) {
s.provenance.reset();
} else {
if (!consume('{')) return false;
Provenance p;
do {
std::string pk;
if (!parseKey(pk)) return false;
std::string pv;
if (!parseString(pv)) return false;
if (pk == "parentSampleId") p.parentSampleId = pv;
else if (pk == "fxChainSnapshot") p.fxChainSnapshot = pv;
} while (consume(','));
if (!consume('}')) return false;
s.provenance = p;
}
} else if (key == "createdTimestamp") {
if (!parseInt64(s.createdTimestamp)) return false;
} else {
if (!skipValue()) return false; // forward-compat: ignore unknown
}
} while (consume(','));
return consume('}');
}
bool Parser::parseIndex(BankIndex& out) {
if (!consume('{')) return false;
skipWs();
if (consume('}')) return true; // empty object — vacuously an empty index
std::vector<Sample> parsed;
do {
std::string key;
if (!parseKey(key)) return false;
if (key == "samples") {
if (!consume('[')) return false;
skipWs();
if (!consume(']')) {
do {
Sample s;
if (!parseSample(s)) return false;
parsed.push_back(std::move(s));
} while (consume(','));
if (!consume(']')) return false;
}
} else {
if (!skipValue()) return false; // version, or unknown keys
}
} while (consume(','));
if (!consume('}')) return false;
// Trailing garbage after the root object is malformed.
skipWs();
if (!eof()) return false;
// Rebuild via add() so the same invariants (relative-path, dedup) that guard
// live inserts also guard deserialized data. Rejected/collapsed entries are
// dropped silently — a well-formed serialized index never triggers them.
for (auto& s : parsed) out.add(s);
return true;
}
} // namespace
std::optional<BankIndex> BankIndex::deserialize(const std::string& json) {
BankIndex idx;
Parser p(json);
if (!p.parseIndex(idx)) return std::nullopt;
return idx;
}
} // namespace reasampler
src/bank_panel.cpp
-3459
View File
File diff suppressed because it is too large Load Diff
src/bank_panel.h
-130
View File
@@ -1,130 +0,0 @@
#pragma once
// bank_panel — the docked grid window (M5, Wave A). REAPER-facing shell: it owns
// a SWELL dialog docked via DockWindowAddEx, and paints the current project's
// bank as a grid of LICE-drawn waveform thumbnails. The panel itself NEVER inserts
// into the arrange or mutates the project/bank (CONTEXT.md §load-bearing
// principle). Audition / multi-select / keyboard nav are Wave B.
//
// The header is REAPER-free as practical: main.cpp drives the panel through these
// free functions, passing the live session so the panel reads the current bank.
// All SWELL / LICE / PCM_source use is confined to bank_panel.cpp. The pure
// layout math and cache keys live in bank_grid (unit-tested outside the DAW).
#include <string>
#include <vector>
#include "tail_control.h" // TailSetting — the panel's tail-mode toggle state
namespace reasampler {
class ReaSamplerSession;
// Wires the panel into main.cpp's lifecycle. Called once after the API pointers
// are loaded, BEFORE the toggle action is registered. `session` must outlive the
// panel (it is the extension-lifetime g_session). Stores the session pointer the
// panel reads on every repaint; does not create the window yet.
void bankPanelInit(ReaSamplerSession* session);
// Toggles the docked window: creates+docks it if hidden, hides+undocks it if
// shown. Bound to the "toggle bank panel" action. Safe to call before the first
// timer tick.
void bankPanelToggle();
// Whether the panel window is currently open/visible. Feeds the action's
// checked-state (toggleaction) so REAPER shows a tick next to the menu entry.
bool bankPanelIsOpen();
// The stable ids of the currently-selected samples, in bank (insertion) order.
// Empty when nothing is selected or the panel has never opened. This is the clean
// seam the `insert` action reads to know WHAT to place — it returns ids (not grid
// indices) so the caller resolves against the live bank and is unaffected by the
// panel's internal index bookkeeping. READ of panel state only; no mutation.
//
// Note: the panel's selection is cleared on a bank change (capture / project
// load), so a returned id always names a sample present in the current bank at
// the moment of the call; the caller still tolerates an absent id gracefully.
//
// Phase B4 (vertical split): the selection lives in whichever REGION the user last
// interacted with (the pool grid on top or a named-bank grid below), which is NOT
// necessarily the active/capture-target bank. The returned ids therefore name
// samples in the FOCUSED region's displayed bank — the bank the user visibly
// selected in. Pair with bankPanelSelectedSourceBankId() to know which bank those
// ids belong to (the move/copy source).
std::vector<std::string> bankPanelSelectedSampleIds();
// The bank id the current selection belongs to — the displayed bank of the region
// the user last interacted with (pool region -> the pool id; named-banks region ->
// the shown tab's bank id). This is the SOURCE bank for a move/copy of the current
// selection, and it is distinct from the active/capture-target bank (active ≠ shown).
// Returns the pool id when nothing is selected or the panel has never opened (a safe
// default source). READ of panel state only; no mutation.
std::string bankPanelSelectedSourceBankId();
// Requests a repaint if the bank changed since the last paint (generation bump).
// Cheap when nothing changed. Driven by the timer so a capture / project load is
// reflected without the panel diffing the bank itself.
void bankPanelRefresh();
// Notifies the panel that persist just (re)loaded a project's view model (membership +
// active mode). main.cpp calls this on the exact tick it drains persist's load signal
// and reapplies the active mode. It re-arms the new-content detector so the just-loaded
// project's PRE-EXISTING content is taken as the baseline (reported as nothing new),
// never diffed against the previously-open project and mass-tagged into the active mode.
// This coordinates the detector's project-identity signal with persist's authoritative
// (GUID-primary) one — the two can no longer diverge on a recycled ReaProject* address,
// which is what caused a project opened in Design to mis-tag its Arrange tracks. READ/
// arm of panel state only; no project or bank mutation.
void bankPanelNotifyProjectLoaded();
// The panel's current tail-mode setting (mode + Manual length), read by the plain
// CAPTURE_ITEM / CAPTURE_TRACK actions when building a CaptureRequest so a capture
// applies whatever the panel toggle is set to. Default None (exact bounds) — a
// capture with no explicit choice stays byte-identical to today. Extension-session
// setting: persists across project loads and panel open/close within a REAPER session;
// resets to None only when the extension unloads (fresh REAPER session). Project
// persistence across REAPER restarts is a noted follow-on.
// Safe to call before the panel has ever opened (returns the default). READ of panel
// state only; the toggle is mutated by a click inside the panel, never here.
TailSetting bankPanelTailSetting();
// The vertical-split full-height layout state (Phase B). The bank window splits
// vertically — pool on top, named-banks region below — and two toggles collapse the
// split: pool full-height (hide the named-banks region) and banks full-height (hide
// the pool). The two are mutually exclusive with the default (both regions shown),
// so one enum captures the whole state.
//
// This bit is B3-owned (the actions flip it); B4's panel RENDERS from it. It lives
// here beside the tail setting — the other session-level view-layout bit the panel
// reads — NOT in the persisted ReaSamplerSession: it is a UI-layout preference, not
// project state, so it must not travel with the .rpp. In-memory for the extension's
// lifetime; resets to Split on unload.
enum class BankPanelFullHeight {
Split, // default: pool region on top, named-banks region below
PoolOnly, // pool full-height — named-banks region hidden
BanksOnly, // banks full-height — pool region hidden
};
// The current full-height layout state (default Split). READ by B4's panel to decide
// which region(s) to draw. Safe before the panel has ever opened.
BankPanelFullHeight bankPanelFullHeight();
// Toggles pool full-height: Split <-> PoolOnly. From PoolOnly returns to Split; from
// either other state (Split or BanksOnly) enters PoolOnly. Bound to the "pool
// full-height" action. Requests a repaint so an open panel reflects the change.
void bankPanelToggledPoolFullHeight();
// Toggles banks full-height: Split <-> BanksOnly, symmetric to the pool toggle.
// Bound to the "banks full-height" action. Requests a repaint.
void bankPanelToggledBanksFullHeight();
// Requests an immediate repaint of the panel if it is open. A no-op when the panel
// is closed (safe to call unconditionally). Called by the actions layer after a
// mode change so the footer [Arrange|Design] toggle reflects the new mode without
// requiring a hide/reshow.
void bankPanelInvalidate();
// Tears the panel down on extension unload: destroys the window and releases any
// cached thumbnails / PCM handles. Mirror of bankPanelInit; safe if never opened.
void bankPanelShutdown();
} // namespace reasampler
src/batch_capture.h
-100
View File
@@ -1,100 +0,0 @@
#pragma once
// batch_capture — the REAPER-free logic behind M11 batch capture (one action fires
// N captures: one bank sample per selected item / per razor area).
//
// PURE MODULE (CLAUDE.md §load-bearing split): NO REAPER types, NO SWELL, NO
// vendor/ includes. Standard library only. The batch shell (main.cpp) reads the DAW
// state (selected items -> their exact bounds; every track's P_RAZOREDITS -> areas)
// and hands the raw ranges here so the genuinely-pure, easy-to-get-wrong pieces are
// unit-tested outside the DAW:
//
// 1. planCaptureUnits: an ordered list of (start,end) source ranges -> an ordered
// list of CaptureUnit, each carrying its 1-based ordinal and validated bounds.
// Empty/inverted ranges are DROPPED (mirrors the offline backend's own
// end>start guard) so a zero-length item/area never produces a stray render.
// Order is preserved: unit ordinals count only the KEPT units, so a batch of
// three valid items yields ordinals 1,2,3 regardless of dropped neighbors.
// 2. BatchOutcome: order-preserving aggregation of per-unit results into a summary
// (succeeded / failed counts + the ordered list of failures) so the shell can
// report a mixed result with one console line and no partial-corruption
// ambiguity. The AGGREGATION is pure; the render loop that feeds it is shell.
//
// Range is the ONLY thing that varies per unit here. FX scope (item vs track) is a
// per-ACTION constant the shell already owns (fxBypassPlanFor); it is not a
// per-unit field. Item-batch uses item scope; razor-batch uses track scope — the
// shell passes the scope straight through to each render, unchanged from the
// single-capture path.
#include <cstddef>
#include <string>
#include <vector>
namespace reasampler {
// One capture in a batch: an exact source range plus its 1-based ordinal within the
// KEPT set. The ordinal disambiguates per-unit file stems (the offline backend's
// unique tag is 1-second-granular, so a fast batch could otherwise collide N files
// onto one name) and labels a failure in the summary.
struct CaptureUnit {
int ordinal = 0; // 1-based, counts kept units only
double startSeconds = 0.0; // exact — no rounding
double endSeconds = 0.0;
};
// A source range handed in by the shell (a selected item's [pos, pos+len] or one
// razor area's [start, end]). Kept as a distinct type from CaptureUnit so the input
// (raw, possibly-invalid) and the output (validated, ordinal-assigned) do not share
// a shape by accident. Named BatchRange (not SourceRange) to avoid collision with
// bank_model's SourceRange, which carries PPQ fields this planner does not need.
struct BatchRange {
double startSeconds = 0.0;
double endSeconds = 0.0;
};
// Validates + orders a batch's source ranges into capture units. Preserves input
// order; DROPS every range with end <= start (empty/inverted) so no stray render is
// planned; assigns 1-based ordinals over the KEPT units. An empty input (no selected
// item / no razor area) yields an empty plan — the shell reports "nothing to batch"
// and writes nothing (the same no-op posture the single-capture path takes).
std::vector<CaptureUnit> planCaptureUnits(const std::vector<BatchRange>& ranges);
// The per-unit verdict the shell records after each render attempt, in unit order.
struct BatchUnitResult {
int ordinal = 0; // the CaptureUnit's ordinal this result is for
bool ok = false; // true iff the render + bank-add succeeded
std::string detail; // failure reason (empty on success) — for the summary
};
// Order-preserving aggregation of a batch's per-unit results. Built incrementally by
// the shell (record() after each unit) so a mid-batch failure is captured without
// aborting the remaining units (no partial corruption: each unit is independent, and
// the selection is restored on every exit path by the shell's RAII guard).
class BatchOutcome {
public:
// Records one unit's verdict. Order of calls IS the reported order.
void record(int ordinal, bool ok, std::string detail = {});
std::size_t total() const { return results_.size(); }
std::size_t succeeded() const;
std::size_t failed() const;
const std::vector<BatchUnitResult>& results() const { return results_; }
// The ordered subset of results that failed (ok == false). For the summary line.
std::vector<BatchUnitResult> failures() const;
// A single human summary line for the console (explicit-action response — allowed
// by the console policy; a batch-completion summary with failure counts qualifies,
// per-unit success spam does not). `noun` is the unit word ("item" / "razor area").
// Examples:
// all-success, 3 items : "ReaSampler batch capture: 3 items captured."
// partial, 3 of 5 : "ReaSampler batch capture: 3 of 5 items captured "
// "(2 failed: #2, #4)."
// empty plan : "ReaSampler batch capture: nothing to capture."
std::string summaryLine(const std::string& noun) const;
private:
std::vector<BatchUnitResult> results_;
};
} // namespace reasampler
src/capture.cpp
-549
View File
@@ -1,549 +0,0 @@
// capture.cpp — REAPER-facing offline-render backend (OfflineRenderBackend).
//
// Compiled into the reaper_reasampler MODULE. Includes
// reaper_plugin_functions.h WITHOUT REAPERAPI_IMPLEMENT — main.cpp is the one TU
// that defines the API pointers; here they are extern (CLAUDE.md §contract).
//
// Renders a CaptureRequest's source over its requested range. The full three-scope
// capture family (item / track / master, each over a razor-else-time range) is
// driven here — all wet-only with optional tail. FX scope is enforced by the
// caller (via FX-bypass-around-render / FxBypassGuard) before invoking capture;
// this backend is source-agnostic and does not itself read the DAW selection.
// Drives the RENDER_* project settings via GetSetProjectInfo / _String
// (the source-selection bits come from render_settings.cpp, the pure mapping),
// snapshots and restores every setting it changes (non-destructive), triggers a
// render, then populates a Sample. It NEVER inserts into the arrange
// (load-bearing principle) — RENDER_ADDTOPROJ&1 is cleared on every path.
//
// The backend is SOURCE-AGNOSTIC: it does NOT read the DAW selection. The action
// layer (main.cpp) resolves each source mode to a concrete time range (+ track
// GUIDs for track captures) and hands it in via the CaptureRequest. This keeps
// the render-driving here and the selection-reading testable/visible up in the
// actions layer.
//
// RENDER PROGRESS WINDOW (Item 2 finding — not suppressible via stock API):
// Triggering kActionRenderUsingMostRecentSettings (42230) causes REAPER to show
// its offline-render progress dialog (progress bar + waveform view) for the
// duration of the render. The RENDER_SETTINGS bits documented in
// reaper_plugin_functions.h (line ~3041) contain no "no-dialog", "headless", or
// "suppress-progress-window" flag. No GetSetProjectInfo desc documents such a
// flag either. There is no stock, header-verifiable mechanism to prevent REAPER
// from showing this UI for an offline file render triggered via Main_OnCommand.
// This is inherent to REAPER's offline render path. The dialog-free alternative
// is the realtime-record backend (M8), which captures the master bus output to a
// temp track during playback and never invokes the offline render pipeline.
#include "capture.h"
#include <cstdint>
#include <ctime>
#include <filesystem>
#include <fstream>
#include <string>
#include <vector>
#include "capture_paths.h"
#include "render_settings.h"
#define REAPERAPI_MINIMAL
#define REAPERAPI_WANT_EnumProjects
#define REAPERAPI_WANT_GetSetProjectInfo
#define REAPERAPI_WANT_GetSetProjectInfo_String
#define REAPERAPI_WANT_GetSet_LoopTimeRange
#define REAPERAPI_WANT_Main_OnCommand
#define REAPERAPI_WANT_Main_SaveProject
#define REAPERAPI_WANT_Master_GetTempo
#define REAPERAPI_WANT_TimeMap_GetTimeSigAtTime
#include "reaper_plugin_functions.h"
namespace reasampler {
namespace {
// --- Render command / setting constants -------------------------------------
//
// DAW-ONLY ASSUMPTION (open question, CONTEXT.md §Open questions): the no-dialog
// render is triggered by the built-in action "File: Render project, using the
// most recent render settings" — command id 42230. This is a stock REAPER main
// action id, NOT part of reaper_plugin_functions.h, so it CANNOT be verified
// against the SDK header; it must be confirmed in a running REAPER. It renders
// headlessly (no dialog) using whatever RENDER_* settings are currently on the
// project — which is exactly why we set them all explicitly first.
constexpr int kActionRenderUsingMostRecentSettings = 42230;
// RENDER_BOUNDSFLAG value 0 = custom time bounds (we set STARTPOS/ENDPOS
// ourselves for exact, unrounded bounds). Verified: SDK header line ~3042.
constexpr double kBoundsCustom = 0.0;
// RENDER_TAILFLAG / RENDER_TAILMS / RENDER_NORMALIZE / RENDER_TRIMEND for the tail
// are driven from the pure tailRenderSettingsFor mapping (render_settings.h),
// unit-tested outside the DAW. See the tail-driving block in capture() below.
// RENDER_DITHER disable-all: &16 = disable all dither/noise-shaping.
// Verified: SDK header line ~3050: "&16=disable all".
// Float-32 output does not need dither, but if the user's project has dither
// enabled the render would obey it, breaking bit-identical repeats. Force off.
constexpr double kDitherDisableAll = 16.0;
// --- WAV render sink configuration ------------------------------------------
//
// FORMAT CHOICE (CONTEXT.md open question — surfaced for Daniel to confirm):
// 32-bit IEEE float. Rationale: float is lossless and needs NO dither, so
// identical inputs render bit-identically (enables the M10 null test) and a dry
// capture nulls exactly against its source. 16/24-bit int paths require dither
// for correctness, which is nondeterministic — unacceptable for a precision tool.
//
// API FACT (SDK header line ~3114): GetSetProjectInfo_String("RENDER_FORMAT", ...)
// uses the BASE64-ENCODED string form of the sink config — NOT raw binary bytes.
// Writing raw bytes causes REAPER to silently reject the value and fall back to
// the project's default render format (typically 16-bit/44.1 kHz). This was the
// confirmed root cause of the M3 offline-capture regression.
//
// GROUND TRUTH: base64 string captured from a live REAPER configured to
// WAV / 32-bit float. Decodes to 7 bytes: 65 76 61 77 20 00 00
// = "evaw" (WAV fourcc, little-endian) + 0x20 (=32, the float bit-depth field)
// + 0x00 0x00 (flags: little-endian, no BWF/loop metadata).
constexpr const char* kRenderFormatWavFloat32 = "ZXZhdyAAAA==";
// Int16 / Int24 blob strings are NOT implemented in M3 — their byte encoding
// was not captured from a live REAPER and must not be guessed. If M7+ adds
// them, capture the ground-truth base64 from a running REAPER first.
//
// Returns nullptr for unsupported depths.
const char* wavSinkConfigBase64(WavBitDepth depth) {
switch (depth) {
case WavBitDepth::Float32: return kRenderFormatWavFloat32;
case WavBitDepth::Int16: return nullptr; // M7+: capture ground-truth blob first
case WavBitDepth::Int24: return nullptr; // M7+: capture ground-truth blob first
}
return nullptr;
}
// --- RENDER_* snapshot / restore --------------------------------------------
//
// The RENDER_* settings are project-GLOBAL: clobbering them would destroy the
// user's render configuration. We snapshot every value we are about to change,
// then restore all of them in the reverse order on the way out (non-destructive
// invariant). Modeled as a small RAII guard so early returns cannot leak a
// half-restored state.
struct RenderSettingsSnapshot {
ReaProject* proj = nullptr;
// Numeric settings (GetSetProjectInfo).
double boundsFlag = 0.0;
double startPos = 0.0;
double endPos = 0.0;
double tailFlag = 0.0;
double tailMs = 0.0;
double srate = 0.0;
double channels = 0.0;
double renderSettings = 0.0;
double addToProj = 0.0;
double dither = 0.0; // RENDER_DITHER — snapshotted so user's setting is restored
double normalize = 0.0; // RENDER_NORMALIZE — snapshotted so user's setting is restored
double trimEnd = 0.0; // RENDER_TRIMEND — snapshotted so the Auto trim threshold is restored
// String settings (GetSetProjectInfo_String). Big buffers: REAPER writes the
// full value in, and RENDER_FORMAT is a base64 blob that can be long.
std::string renderFile;
std::string renderPattern;
std::string renderFormat;
bool captured = false;
};
std::string getProjString(ReaProject* proj, const char* desc) {
std::vector<char> buf(4096, '\0');
GetSetProjectInfo_String(proj, desc, buf.data(), false);
return std::string(buf.data());
}
void setProjString(ReaProject* proj, const char* desc, const std::string& value) {
// GetSetProjectInfo_String takes a non-const char*; copy into a mutable buf.
std::vector<char> buf(value.begin(), value.end());
buf.push_back('\0');
GetSetProjectInfo_String(proj, desc, buf.data(), true);
}
void snapshotRenderSettings(RenderSettingsSnapshot& s, ReaProject* proj) {
s.proj = proj;
s.boundsFlag = GetSetProjectInfo(proj, "RENDER_BOUNDSFLAG", 0.0, false);
s.startPos = GetSetProjectInfo(proj, "RENDER_STARTPOS", 0.0, false);
s.endPos = GetSetProjectInfo(proj, "RENDER_ENDPOS", 0.0, false);
s.tailFlag = GetSetProjectInfo(proj, "RENDER_TAILFLAG", 0.0, false);
s.tailMs = GetSetProjectInfo(proj, "RENDER_TAILMS", 0.0, false);
s.srate = GetSetProjectInfo(proj, "RENDER_SRATE", 0.0, false);
s.channels = GetSetProjectInfo(proj, "RENDER_CHANNELS", 0.0, false);
s.renderSettings = GetSetProjectInfo(proj, "RENDER_SETTINGS", 0.0, false);
s.addToProj = GetSetProjectInfo(proj, "RENDER_ADDTOPROJ", 0.0, false);
s.dither = GetSetProjectInfo(proj, "RENDER_DITHER", 0.0, false);
s.normalize = GetSetProjectInfo(proj, "RENDER_NORMALIZE", 0.0, false);
s.trimEnd = GetSetProjectInfo(proj, "RENDER_TRIMEND", 0.0, false);
s.renderFile = getProjString(proj, "RENDER_FILE");
s.renderPattern = getProjString(proj, "RENDER_PATTERN");
s.renderFormat = getProjString(proj, "RENDER_FORMAT");
s.captured = true;
}
void restoreRenderSettings(const RenderSettingsSnapshot& s) {
if (!s.captured) return;
// Restore strings first, then numerics — order is not load-bearing since the
// fields are independent, but we mirror snapshot order for readability.
setProjString(s.proj, "RENDER_FILE", s.renderFile);
setProjString(s.proj, "RENDER_PATTERN", s.renderPattern);
setProjString(s.proj, "RENDER_FORMAT", s.renderFormat);
GetSetProjectInfo(s.proj, "RENDER_BOUNDSFLAG", s.boundsFlag, true);
GetSetProjectInfo(s.proj, "RENDER_STARTPOS", s.startPos, true);
GetSetProjectInfo(s.proj, "RENDER_ENDPOS", s.endPos, true);
GetSetProjectInfo(s.proj, "RENDER_TAILFLAG", s.tailFlag, true);
GetSetProjectInfo(s.proj, "RENDER_TAILMS", s.tailMs, true);
GetSetProjectInfo(s.proj, "RENDER_SRATE", s.srate, true);
GetSetProjectInfo(s.proj, "RENDER_CHANNELS", s.channels, true);
GetSetProjectInfo(s.proj, "RENDER_SETTINGS", s.renderSettings, true);
GetSetProjectInfo(s.proj, "RENDER_ADDTOPROJ", s.addToProj, true);
GetSetProjectInfo(s.proj, "RENDER_DITHER", s.dither, true);
GetSetProjectInfo(s.proj, "RENDER_NORMALIZE", s.normalize, true);
GetSetProjectInfo(s.proj, "RENDER_TRIMEND", s.trimEnd, true);
}
// RAII wrapper: guarantees restore on every return path from capture().
struct ScopedRenderSettings {
RenderSettingsSnapshot snap;
explicit ScopedRenderSettings(ReaProject* proj) {
snapshotRenderSettings(snap, proj);
}
~ScopedRenderSettings() { restoreRenderSettings(snap); }
ScopedRenderSettings(const ScopedRenderSettings&) = delete;
ScopedRenderSettings& operator=(const ScopedRenderSettings&) = delete;
};
// A monotonic, filesystem-safe timestamp tag so repeated captures in one session
// do not collide on the file name. NOTE: the tag varies the file NAME, not the
// audio bytes — bit-identical-repeat is about identical *content* for identical
// requests; two deliberate captures naturally live in two files.
std::string makeUniqueTag() {
std::time_t now = std::time(nullptr);
return std::to_string(static_cast<long long>(now));
}
// Reads the whole file into a byte buffer. Returns an empty vector on any I/O
// failure (the caller then leaves contentHash empty — the safe, confirm-eliciting
// direction for an unreadable file).
std::vector<std::uint8_t> readFileBytes(const std::string& path) {
std::ifstream f(path, std::ios::binary | std::ios::ate);
if (!f) return {};
const std::streamoff size = f.tellg();
if (size <= 0) return {};
std::vector<std::uint8_t> bytes(static_cast<std::size_t>(size));
f.seekg(0);
f.read(reinterpret_cast<char*>(bytes.data()), size);
if (!f) return {};
return bytes;
}
} // namespace
CaptureResult OfflineRenderBackend::capture(const CaptureRequest& request) {
CaptureResult result;
// Resolve the RENDER_SETTINGS source/processing bits for this mode + wet/dry
// (pure mapping, unit-tested in render_settings). An unsupported mode (only
// SourceMode::Realtime — that is the M8 realtime backend) is refused here so
// the offline path never silently renders the wrong thing.
const RenderSettingsChoice choice =
renderSettingsFor(request.sourceMode, request.wetDry);
if (!choice.supported) {
result.status = CaptureStatus::UnsupportedMode;
result.message = "OfflineRenderBackend does not render this source mode "
"(realtime capture is the M8 backend).";
return result;
}
// Exact bounds: reject an empty/inverted range rather than render silence.
if (!(request.endSeconds > request.startSeconds)) {
result.status = CaptureStatus::EmptyRange;
result.message = "Capture range is empty (end <= start).";
return result;
}
// Current project (idx -1 == the active project tab). Verified: SDK header
// line ~1264, EnumProjects(int idx, char*, int).
ReaProject* proj = EnumProjects(-1, nullptr, 0);
if (!proj) {
result.status = CaptureStatus::NoProject;
result.message = "No active project.";
return result;
}
// Resolve the project directory from the .rpp file path.
//
// Unsaved-project detection: we use EnumProjects(-1, buf, bufsz) to read
// the project's .rpp filename. Per SDK header line ~1262:
// EnumProjects(int idx, char* projfnOutOptional, int sz)
// "idx=-1 for current project, projfn can be NULL if not interested in filename."
// The out-parameter is the full path to the .rpp file, and is EMPTY for a
// project that has never been saved — making it a reliable unsaved sentinel.
//
// WHY NOT GetProjectPathEx: that function returns the project *recording path*
// (SDK header line ~2548: "Get the project recording path."), NOT the .rpp
// location. For an unsaved project it returns REAPER's default media/recording
// directory — never empty — so it cannot detect the unsaved state. Using it
// caused the original bug: the guard never fired, and captures landed in
// REAPER's default media location rather than alongside the .rpp.
//
// WHY NOT GetProjectPathEx for the saved-project dir: even for a saved project,
// GetProjectPathEx returns the recording path (which may be a media subfolder),
// not the .rpp parent directory. We need the .rpp parent so reasampler_bank/
// sits alongside the .rpp and travels with the project.
//
// FLOW:
// 1. Read .rpp path via EnumProjects(-1, buf, bufsz).
// 2. If non-empty (saved) -> derive project dir as parent of the .rpp.
// 3. If empty (unsaved) -> Main_SaveProject(proj, true) prompts Save-As.
// Re-read. If now non-empty -> proceed. If still empty (user cancelled) ->
// refuse CaptureStatus::NoProject, write nothing.
//
// DAW-ONLY ASSUMPTION: Main_SaveProject(proj, true) opens a Save/Save-As
// dialog and blocks until the user dismisses it. "true" = forceSaveAsIn.
// Verified SDK header line ~4599:
// void Main_SaveProject(ReaProject* proj, bool forceSaveAsInOptional)
// The blocking behaviour and dialog appearance can only be confirmed in a
// running REAPER.
auto readRppPath = [&]() -> std::string {
std::vector<char> buf(4096, '\0');
// EnumProjects(-1, ...) returns the active project and writes the .rpp
// path into buf. We already have the ReaProject* from the earlier call
// (nullptr-checked above), but calling EnumProjects again is the only
// stock, header-documented way to read the .rpp filename.
EnumProjects(-1, buf.data(), static_cast<int>(buf.size()));
return std::string(buf.data());
};
std::string rppPath = readRppPath();
if (rppPath.empty()) {
// Project is unsaved. Prompt the user to choose a save location.
Main_SaveProject(proj, true);
// Re-read: non-empty if the user confirmed, still empty if cancelled.
rppPath = readRppPath();
}
if (rppPath.empty()) {
// User cancelled the save dialog — refuse, write nothing.
result.status = CaptureStatus::NoProject;
result.message = "Project must be saved before capture — nothing captured.";
return result;
}
// Derive the project directory as the parent folder of the .rpp file.
// std::filesystem::path handles both forward- and back-slash paths; .parent_path()
// gives the containing directory. Convert to forward-slash string so the rest
// of the capture pipeline (deriveBankPaths, RENDER_FILE) sees a clean path.
const std::string projectDir = [&]() -> std::string {
namespace fs = std::filesystem;
std::string dir = fs::path(rppPath).parent_path().string();
// normalizeSlashes is in capture_paths (pure); replicate the transform
// inline here to avoid a cross-module dependency for a one-liner.
for (char& c : dir) { if (c == '\\') c = '/'; }
// Strip a single trailing slash (defensive; parent_path usually omits it).
if (dir.size() > 1 && dir.back() == '/') dir.pop_back();
return dir;
}();
// Compute the unique tag ONCE so the file stem and Sample.id carry the same
// timestamp. Calling makeUniqueTag() twice could yield different values if a
// second boundary crosses between the two calls (bug: id and filename diverge).
const std::string uniqueTag = makeUniqueTag();
const BankPaths paths =
deriveBankPaths(projectDir, request.baseName, uniqueTag);
// Snapshot + auto-restore ALL render settings we are about to touch.
ScopedRenderSettings guard(proj);
// --- Drive the render settings (exact, deterministic) -------------------
// Custom time bounds so the rendered length equals the requested range with
// NO rounding and NO added silence (unless a tail was explicitly requested).
GetSetProjectInfo(proj, "RENDER_BOUNDSFLAG", kBoundsCustom, true);
GetSetProjectInfo(proj, "RENDER_STARTPOS", request.startSeconds, true);
GetSetProjectInfo(proj, "RENDER_ENDPOS", request.endSeconds, true);
// Tail: TAILFLAG / TAILMS / NORMALIZE / TRIMEND all come from the pure mapping
// (render_settings.h, unit-tested). None -> exact bounds + disable-all normalize
// (byte-identical to the pre-tail path); Auto -> 8 s tail + surgical trim-end
// normalize + -72 dB TRIMEND; Manual -> clamped fixed tail + disable-all, no trim.
// RENDER_NORMALIZE is driven HERE from the mapping (not the determinism block
// below) so the Auto surgical value is not clobbered — the snapshot guard restores
// the user's original RENDER_NORMALIZE / RENDER_TRIMEND on every exit path.
const TailRenderSettings tail =
tailRenderSettingsFor(request.tailMode, request.tailMs);
GetSetProjectInfo(proj, "RENDER_TAILFLAG",
static_cast<double>(tail.tailFlag), true);
GetSetProjectInfo(proj, "RENDER_TAILMS", tail.tailMs, true);
// Source-selection bits for this mode, from the pure render_settings mapping
// (verified against SDK header ~3041). All M7 actions are wet-only:
// master mix = 0; tracks = &128; items = &32|single-file; razor = &4096|single-file.
GetSetProjectInfo(proj, "RENDER_SETTINGS",
static_cast<double>(choice.settings), true);
// Resolve the effective sample rate. When the request carries 0 ("follow
// project"), read PROJECT_SRATE explicitly so RENDER_SRATE is set to the
// actual value — not left as 0 for REAPER to interpret. SDK header line ~3064:
// PROJECT_SRATE = sample rate (ignored unless PROJECT_SRATE_USE set); the
// value is still readable via GetSetProjectInfo even when _USE is clear.
const int effectiveSampleRate = (request.sampleRate > 0)
? request.sampleRate
: static_cast<int>(GetSetProjectInfo(proj, "PROJECT_SRATE", 0.0, false));
// Pin RENDER_SRATE only when the resolved rate is known (> 0). PROJECT_SRATE
// can read 0 on a project that has never explicitly pinned a sample rate (e.g.
// brand-new projects before the user has visited the project settings). Forcing
// RENDER_SRATE = 0 would re-introduce the "0 as literal" trap we fixed by
// moving away from blind passthrough. When the rate is unknown, leave
// RENDER_SRATE unset so REAPER follows its own project-rate default — which is
// correct behaviour for that project — rather than pinning a bogus 0.
if (effectiveSampleRate > 0) {
GetSetProjectInfo(proj, "RENDER_SRATE",
static_cast<double>(effectiveSampleRate), true);
}
GetSetProjectInfo(proj, "RENDER_CHANNELS",
static_cast<double>(request.channelCount), true);
// Load-bearing principle: do NOT add the rendered file to the project as an
// item. Clearing RENDER_ADDTOPROJ&1 keeps capture out of the arrange.
GetSetProjectInfo(proj, "RENDER_ADDTOPROJ", 0.0, true);
// Determinism: disable dither so identical inputs produce bit-identical files
// and a dry capture nulls to silence. RENDER_DITHER &16 = disable all dither/
// noise-shaping (SDK header line ~3050). Snapshotted above; restored by the guard.
GetSetProjectInfo(proj, "RENDER_DITHER", kDitherDisableAll, true);
// RENDER_NORMALIZE + RENDER_TRIMEND come from the tail mapping (above). None /
// Manual -> disable-all (byte-identical to the pre-tail path); Auto -> surgical
// trim-end (only &32768) + the -72 dB TRIMEND. A fixed-threshold trailing-silence
// trim scales/limits/fades nothing, so Auto stays deterministic and un-coloring
// (spec §surgical normalize). TRIMEND is only consulted when the trim bit is set,
// but we write it unconditionally (harmless when clear) so the value is explicit.
GetSetProjectInfo(proj, "RENDER_NORMALIZE",
static_cast<double>(tail.normalize), true);
GetSetProjectInfo(proj, "RENDER_TRIMEND", tail.trimEnd, true);
// Output location: directory (RENDER_FILE) + file stem (RENDER_PATTERN).
// RENDER_PATTERN with no wildcards is a literal stem; REAPER appends the
// format extension. Use paths.fileStem — capture_paths owns the .wav suffix
// knowledge; re-stripping here would duplicate that coupling.
setProjString(proj, "RENDER_FILE", paths.absoluteDir);
setProjString(proj, "RENDER_PATTERN", paths.fileStem);
// Pin the WAV format using the ground-truth base64 blob for the chosen depth.
// Int16/Int24 are not implemented (no live-captured blob) — fail explicitly
// rather than silently mis-render at the wrong bit depth.
const char* fmtBase64 = wavSinkConfigBase64(request.bitDepth);
if (!fmtBase64) {
result.status = CaptureStatus::UnsupportedFormat;
result.message = "Requested bit depth has no verified RENDER_FORMAT blob "
"(M3 supports Float32 only; Int16/Int24 are M7+).";
return result;
// guard's dtor restores every RENDER_* setting here.
}
setProjString(proj, "RENDER_FORMAT", fmtBase64);
// --- Trigger the render -------------------------------------------------
// DAW-ONLY ASSUMPTION (see kActionRenderUsingMostRecentSettings): this runs
// the render synchronously on the current build. REAPER will show its
// offline-render progress window for the duration (see file-top comment —
// the progress UI is not suppressible via stock API).
Main_OnCommand(kActionRenderUsingMostRecentSettings, 0);
// --- Verify the output file exists ---------------------------------------
// Main_OnCommand returns void, so a failed render is silent. Stat the
// expected output path; if the file does not exist the render failed.
// Note: std::filesystem is used only in this REAPER-facing .cpp — the pure
// libs (capture_paths, bank_model) remain filesystem-free.
const std::string expectedPath = paths.absoluteDir + "/" + paths.fileName;
if (!std::filesystem::exists(expectedPath)) {
result.status = CaptureStatus::RenderFailed;
result.message = "Render produced no output file (expected: " +
expectedPath + "). Check the REAPER console for errors.";
return result;
// guard's dtor restores every RENDER_* setting here.
}
// --- Populate the Sample -------------------------------------------------
// We record the request's own bounds (exact) rather than re-measuring the
// file, so the Sample's range is precisely what was asked for.
Sample s;
// Use the same uniqueTag that named the file — calling makeUniqueTag() again
// here would risk a different timestamp if a second boundary crosses between
// the two calls, making Sample.id inconsistent with the file name.
s.id = "cap-" + uniqueTag + "-" + paths.fileName;
s.displayName = request.baseName;
s.relativePath = paths.relativePath; // project-relative (invariant)
s.sourceMode = request.sourceMode;
s.sourceRange.startSeconds = request.startSeconds;
s.sourceRange.endSeconds = request.endSeconds;
// DEFERRED (M6/M7): startPpq, endPpq, and lengthBeats are left at 0.
// PPQ mapping via TimeMap2_timeToBeats is a musical-placement concern for the
// insert milestone; the model refuses to re-derive one bound from the other.
// Seconds are the authoritative source for the render. Do NOT add DAW-
// unverifiable PPQ resolution here — it requires a live REAPER to validate.
s.wetDry = request.wetDry;
// Track GUIDs for track-scoped captures (empty for master/items/razor). The
// caller resolved the selection to canonical GUID strings; we record them so a
// "re-capture from source" (M10) knows which tracks the sample came from.
s.trackGuids = request.trackGuids;
s.channelCount = request.channelCount;
// Store the resolved sample rate only when it is known (> 0). If the project
// never pinned a rate (PROJECT_SRATE read 0), we did not force RENDER_SRATE
// either, so the render ran at REAPER's project default — an unknown value from
// this code's perspective. Leave sampleRate at 0 (the Sample zero-value) rather
// than store a bogus literal; M6/M7 can fill it in by probing the rendered file.
s.sampleRate = effectiveSampleRate; // 0 when project rate was unknown
s.lengthSeconds = request.endSeconds - request.startSeconds;
s.captureTempo = Master_GetTempo(); // BPM at capture time (verified ~4651)
// Time signature at the capture's START time (L7 F1 stamp). TimeMap_GetTimeSigAtTime
// (verified reaper_plugin_functions.h:7130 — void(ReaProject*, double time,
// int* numOut, int* denomOut, double* tempoOut)) reads the meter effective at that
// project time, so a sample captured under 3/4 keeps a 3/4 read-out even if the
// project later switches to 4/4. proj=nullptr => the active project (matches the
// Master_GetTempo() call above, which is also active-project). The tempoOut is
// ignored — captureTempo already carries the master tempo. Leaves 0/0 (unstamped)
// if the API is somehow unavailable; the formatter renders a blank musical read-out.
{
int tsNum = 0, tsDenom = 0;
double tsTempo = 0.0;
TimeMap_GetTimeSigAtTime(nullptr, request.startSeconds, &tsNum, &tsDenom, &tsTempo);
s.captureTimeSigNum = tsNum;
s.captureTimeSigDenom = tsDenom;
}
s.tier = Tier::Scratch; // captures land in scratch by default
// Content hash: WAV-aware FNV-1a over the rendered file's fmt+data chunks so
// hashReferencedElsewhere can identify copies in other banks and suppress the
// last-reference confirm when another bank still holds the same file. Using
// hashWavContent (not the raw hashBytes) skips render-varying metadata chunks
// (bext origination timestamp, iXML, LIST/INFO, etc.) so two renders of identical
// audio collapse to the same hash. Best-effort: an unreadable file leaves
// contentHash empty — the safe, confirm-eliciting direction (bank_model treats
// "" as non-participating in dedup, which is the existing fallback semantics).
{
const std::vector<std::uint8_t> fileBytes = readFileBytes(expectedPath);
if (!fileBytes.empty()) {
s.contentHash = hashWavContent(fileBytes);
}
}
s.createdTimestamp = static_cast<std::int64_t>(std::time(nullptr));
// Phase S seam fields (rootNote / loop) left empty (D-B). An offline render of a
// master mix / track / time-selection is not a single played note, so no root
// note is derivable here — we do NOT guess one. Loop points are set later by an
// explicit user action, not at capture. Leaving them empty is the honest default;
// the instrument (Phase S) treats an absent root note as "not a pitched sample".
result.status = CaptureStatus::Ok;
result.sample = s;
result.message = "Captured [" +
std::to_string(request.startSeconds) + "s, " +
std::to_string(request.endSeconds) + "s] -> " +
paths.relativePath;
return result;
// guard's dtor restores every RENDER_* setting here.
}
} // namespace reasampler
src/capture.h
-234
View File
@@ -1,234 +0,0 @@
#pragma once
// capture — the REAPER-facing capture shell (CLAUDE.md §load-bearing split).
//
// This header declares the capture *seam* the later milestones fill:
// * CaptureRequest — everything a capture needs, source-mode-agnostic.
// * ICaptureBackend — the SYNCHRONOUS interface OfflineRenderBackend implements
// (headless, immediate, returns a finished Sample).
// * OfflineRenderBackend — the deterministic default; drives the offline scopes.
// * RealtimeRecordBackend — the ASYNC realtime seam (begin/tick/abort), driven
// across timer ticks; deliberately NOT an ICaptureBackend
// (see the SEAM CHOICE note at its declaration).
//
// It includes bank_model (pure) to hand back a populated Sample, but NO REAPER
// headers — the .cpp is the REAPER-facing translation unit. Keeping this header
// REAPER-free lets callers (main.cpp, future actions.cpp) depend on the seam
// without dragging the SDK into every include site.
#include <memory>
#include <string>
#include <vector>
#include "bank_model.h"
#include "render_settings.h" // TailMode (pure) — the three-state tail contract
// MediaTrack is forward-declared (like track_guid.h) so this header stays
// REAPER-free while RealtimeRecordBackend::begin can take the resolved source
// MediaTrack* to tap. The pointers are opaque here — never dereferenced in a
// pure/header context; only the REAPER-facing capture_realtime.cpp touches them.
class MediaTrack;
namespace reasampler {
// Audio bit-depth for the rendered wav. 32-bit float is the M3 default —
// rationale lives in capture.cpp next to the sink-config bytes.
enum class WavBitDepth {
Int16,
Int24,
Float32,
};
// One capture, independent of source mode. Populated by the caller (the action
// handler in M3; the action family in M7) and consumed by a backend.
//
// M3 fills only the fields the master-mix/time-selection path needs; the rest
// are declared now so M7/M8 do not reshape the struct (they are the seam).
struct CaptureRequest {
SourceMode sourceMode = SourceMode::MasterMix;
// Sample-accurate render bounds in project seconds. For the M3 spike these
// come straight from the time selection (GetSet_LoopTimeRange) — NO rounding.
double startSeconds = 0.0;
double endSeconds = 0.0;
// 1.0 = fully wet, 0.0 = fully dry. All three-scope capture actions set this to 1.0 (wet).
// The field is kept as the seam for future true-dry work (M10 null test):
// true pre-FX dry offline is NOT available via RENDER_SETTINGS — it requires
// FX-bypass-around-render or the M8 realtime pre-FX path, and will be
// designed alongside the M10 null test. Also recorded on the Sample.
double wetDry = 1.0;
// Track GUID(s) the capture came from, when the source mode is track-scoped
// (SelectedTracks). Empty for master/items/razor. The action layer (M7)
// resolves the selection to canonical GUID strings and passes them here; the
// backend copies them onto the Sample (it does NOT itself read the selection —
// it stays source-agnostic, driven entirely by the request).
std::vector<std::string> trackGuids;
// Render tail (docs/product/capture-tail.md §The three tail states). Default
// None: exact bounds, no added silence — the precision invariant, and the only
// mode valid for null-test / verify captures. `tailMs` is meaningful ONLY for
// TailMode::Manual (clamped to the 8 s cap by the pure mapping); Auto uses the
// 8 s cap + -72 dB trim internally, None ignores it.
TailMode tailMode = TailMode::None;
double tailMs = 0.0;
// Output format. 0 sampleRate => follow project rate (deterministic: the
// project rate is fixed for a given project).
int sampleRate = 0;
int channelCount = 2;
WavBitDepth bitDepth = WavBitDepth::Float32;
// Human base name for the file stem; sanitized by capture_paths. The unique
// tag (disambiguator) is supplied separately by the backend caller so the
// pure naming logic stays testable.
std::string baseName = "capture";
std::string uniqueTag; // e.g. a timestamp/counter; may be empty
};
// Outcome of a capture attempt. `Ok` carries the populated Sample; every failure
// is an explicit code (never a thrown exception across the REAPER boundary) so
// the action handler can log a precise reason.
enum class CaptureStatus {
Ok,
NoProject, // no active project to render / resolve a bank folder
EmptyRange, // start >= end: nothing to render
UnsupportedMode, // backend does not implement this source mode (M3 scope)
UnsupportedFormat, // requested bit depth has no known REAPER blob (M3: Float32 only)
RenderFailed, // the render action ran but produced no output file
TransportBusy, // realtime backend: transport already playing/recording — refused
};
struct CaptureResult {
CaptureStatus status = CaptureStatus::RenderFailed;
Sample sample; // valid only when status == Ok
std::string message; // human-readable detail for the console log
};
// The capture seam. One method: run a request, return a populated Sample (or a
// failure code). Backends are non-destructive — they must restore any global
// state they touch before returning (OfflineRenderBackend snapshots/restores the
// RENDER_* project settings).
class ICaptureBackend {
public:
virtual ~ICaptureBackend() = default;
virtual CaptureResult capture(const CaptureRequest& request) = 0;
};
// Deterministic offline-render backend. Drives the full offline source family —
// master mix / time selection, selected tracks, selected items, razor area — all
// wet-only (render_settings.h) with optional tail. The source selection + range
// are resolved by the caller (the action layer) and handed in via the
// CaptureRequest; the backend drives RENDER_* and never reads the DAW selection
// itself. SourceMode::Realtime returns UnsupportedMode (that is the M8 backend).
class OfflineRenderBackend : public ICaptureBackend {
public:
CaptureResult capture(const CaptureRequest& request) override;
};
// --- Realtime-record backend: the ASYNC seam ---------------------------------
//
// A realtime record is inherently asynchronous: CSurf_OnRecord starts the transport
// on REAPER's audio thread and returns immediately — it does NOT block until the
// range completes, which takes (end - start) wall-clock seconds. Blocking the main
// thread for that duration freezes REAPER's UI, so the realtime backend is DRIVEN
// ACROSS TIMER TICKS instead: begin() starts and returns at once; tick() (called
// from the same OnTimer that runs session.poll()) advances the in-flight record and
// reports when it is done.
//
// SEAM CHOICE (surfaced): RealtimeRecordBackend deliberately does NOT implement the
// synchronous ICaptureBackend — that interface returns a finished Sample from one
// call, which no longer fits a record that spans ticks. The two backends have
// genuinely different lifecycles (offline is headless + immediate; realtime is
// transport-driven + async), so forcing a shared async interface would make offline
// fake a lifecycle it does not have (its tick() would always be Done on the first
// call — dead code / an LSP smell). Offline stays synchronous and unchanged; the
// realtime backend owns this small bespoke async seam, driven by exactly one caller
// (main.cpp's OnTimer). This is the split-sync/async fork, chosen over a unified
// async interface for that reason.
// One tick's verdict from the in-flight record.
enum class RealtimeTickStatus {
InProgress, // still recording — call tick() again next timer tick
Done, // finished (range end reached, or the user stopped) — `result` is set
Failed, // an error tore the capture down — `result.message` explains
};
struct RealtimeTickResult {
RealtimeTickStatus status = RealtimeTickStatus::InProgress;
CaptureResult result; // meaningful only when status == Done or Failed
};
// The opaque in-flight capture state. Owns the snapshot of everything to restore
// (temp track + its receive sends from the source tracks, other tracks' I_RECARM,
// transport, edit cursor, time selection) and the record's own project handle.
// Defined in
// capture_realtime.cpp; the header stays REAPER-free (no MediaTrack*/ReaProject*
// leaks here) by holding it behind a forward-declared type + unique_ptr.
//
// restore()/teardown is idempotent and lives ON THIS OBJECT (not a function-scope
// RAII guard) because the record spans ticks — no single stack frame outlives it.
// Every terminal path (normal completion, user stop, error, project switch, unload)
// funnels through the same single restore, safe to call once from whichever fires.
class RealtimeCaptureState;
// Out-of-line deleter so callers (main.cpp) can own a unique_ptr to the opaque
// RealtimeCaptureState WITHOUT its full (REAPER-typed) definition — the delete is
// compiled in capture_realtime.cpp where the type is complete, keeping this header
// REAPER-free (load-bearing split).
struct RealtimeCaptureStateDeleter {
void operator()(RealtimeCaptureState* p) const noexcept;
};
using RealtimeCaptureHandle =
std::unique_ptr<RealtimeCaptureState, RealtimeCaptureStateDeleter>;
// Realtime-record backend — captures by RECORDING in realtime (transport-driven)
// into a hidden temp track, then moves the recorded file into the bank as a Sample.
// For sources offline render cannot do (hardware, performed FX) and as the true
// pre-FX-dry path (I_RECMODE_FLAGS &3==1 — the only pre-FX tap in the SDK; offline
// render has none). Dialog-free: never invokes the offline-render progress window.
//
// Non-bit-identical by nature (it is realtime); offline stays the deterministic
// default. Non-destructive across EVERY terminal path — the review gate — which is
// harder here than offline because the record spans ticks: the snapshot + restore
// live on RealtimeCaptureState, not a function-scope RAII destructor.
//
// SCOPE (this increment): TRACK scope only — records the selected track's OWN
// output (item + that track's own FX + its own fader/pan, PRE-parent), matching
// offline's track scope. This needs NO FxBypassGuard: a send tapping a track's
// output is naturally PRE-parent (the parent has not summed it yet), so the tap is
// chain-independent by construction. Item realtime is deferred (UnsupportedMode).
class RealtimeRecordBackend {
public:
// Starts a realtime record: validates the request (track scope, non-empty range,
// at least one source track, active + saved project, transport idle), snapshots
// all state to restore, creates the hidden temp track, routes a send FROM each
// source track INTO the temp track, arms, and CSurf_OnRecord — then returns
// IMMEDIATELY (no wait, no UI block). `sourceTracks` are the selected tracks to
// tap (resolved by the action layer — the CaptureRequest itself stays REAPER-free,
// carrying only the provenance GUIDs). On success the returned unique_ptr owns the
// in-flight state; drive it with tick(). On a validation/setup failure returns
// nullptr and fills `outFailure` with the CaptureStatus + message (nothing was
// left mutated — begin() restores on its own failure paths).
RealtimeCaptureHandle begin(const CaptureRequest& request,
const std::vector<MediaTrack*>& sourceTracks,
CaptureResult& outFailure);
// Advances the in-flight record one tick. Reads the transport (bound to the
// record's OWN project handle so a project switch cannot confuse it), and on a
// terminal verdict stops the transport, finalizes the recorded file into the
// bank Sample (Done) or reports the failure (Failed), then restores ALL
// snapshotted state. Returns InProgress while the record is still running.
// After Done/Failed the state is spent — the caller drops the unique_ptr.
RealtimeTickResult tick(RealtimeCaptureState& state);
// Force-terminate an in-flight record NOW without waiting for the range end:
// stops the transport, finalizes whatever was captured (best effort) or abandons
// it, and restores ALL snapshotted state. For the shutdown / project-switch
// paths (extension unload, a new project became active) where the record must
// not leak a temp track / armed track / altered transport into the user's
// project. Idempotent — safe even if a prior tick already tore the state down.
RealtimeTickResult abort(RealtimeCaptureState& state);
};
} // namespace reasampler
src/capture_paths.cpp
-287
View File
@@ -1,287 +0,0 @@
#include "capture_paths.h"
#include <cassert>
#include <cctype>
#include <cstdint>
#include <cstdio>
#include <cstring> // std::memcmp
#include <filesystem>
#include <vector>
namespace reasampler {
std::string hashBytes(const std::uint8_t* data, std::size_t len) {
// FNV-1a 64-bit: deterministic, no dependencies, adequate for dedup identity.
// Constants from the FNV spec (http://www.isthe.com/chongo/tech/comp/fnv/).
constexpr std::uint64_t kOffsetBasis = 14695981039346656037ULL;
constexpr std::uint64_t kPrime = 1099511628211ULL;
std::uint64_t h = kOffsetBasis;
for (std::size_t i = 0; i < len; ++i) {
h ^= static_cast<std::uint64_t>(data[i]);
h *= kPrime;
}
// Format as 16-digit lowercase hex (zero-padded) for a fixed-length string.
char buf[17];
std::snprintf(buf, sizeof(buf), "%016llx",
static_cast<unsigned long long>(h));
return std::string(buf);
}
std::string hashWavContent(const std::vector<std::uint8_t>& bytes) {
// Walk the RIFF/WAVE container and feed only the `fmt ` body and `data` body
// through FNV-1a, prefixed with the domain-separation tag byte 'W' (0x57).
// Any render-varying metadata chunks (bext, iXML, LIST, SMED, etc.) are skipped.
// If the file does not parse as RIFF/WAVE with both fmt and data chunks, fall back
// to whole-file hashBytes (no prefix) so an unrecognized file still gets a hash.
//
// The chunk-walk mirrors wav_trim::parseWavLayout's structure but accumulates
// FNV state instead of recording geometry — no second parser, same logic.
// FNV-1a 64-bit constants (same as hashBytes).
constexpr std::uint64_t kOffsetBasis = 14695981039346656037ULL;
constexpr std::uint64_t kPrime = 1099511628211ULL;
// Minimum viable RIFF/WAVE: "RIFF"(4) size(4) "WAVE"(4) = 12 bytes.
auto tagEq = [&](std::size_t off, const char* tag) -> bool {
return off + 4 <= bytes.size() &&
std::memcmp(bytes.data() + off, tag, 4) == 0;
};
auto readU32LE = [&](std::size_t off) -> std::uint32_t {
return static_cast<std::uint32_t>(bytes[off]) |
(static_cast<std::uint32_t>(bytes[off + 1]) << 8) |
(static_cast<std::uint32_t>(bytes[off + 2]) << 16) |
(static_cast<std::uint32_t>(bytes[off + 3]) << 24);
};
bool isWav = bytes.size() >= 12 &&
tagEq(0, "RIFF") &&
tagEq(8, "WAVE");
if (isWav) {
// Accumulate FNV-1a starting with the domain-separation tag byte 'W'.
std::uint64_t h = kOffsetBasis;
auto feedByte = [&](std::uint8_t b) {
h ^= static_cast<std::uint64_t>(b);
h *= kPrime;
};
bool haveFmt = false;
bool haveData = false;
// Domain-separation prefix: 'W' (0x57) distinguishes a content hash from a
// whole-file hash of different bytes that happen to be the same length.
feedByte(static_cast<std::uint8_t>('W'));
std::size_t pos = 12;
while (pos + 8 <= bytes.size()) {
const std::size_t bodyOffset = pos + 8;
const std::uint32_t bodySize = readU32LE(pos + 4);
if (tagEq(pos, "fmt ")) {
// Feed the entire fmt body (all fields, including format tag, channels,
// sample rate, bits-per-sample — everything that defines the audio format).
if (bodyOffset + bodySize <= bytes.size()) {
for (std::uint32_t i = 0; i < bodySize; ++i)
feedByte(bytes[bodyOffset + i]);
haveFmt = true;
}
} else if (tagEq(pos, "data")) {
// Feed the entire PCM payload.
if (bodyOffset + bodySize <= bytes.size()) {
for (std::uint32_t i = 0; i < bodySize; ++i)
feedByte(bytes[bodyOffset + i]);
haveData = true;
}
}
// All other chunks (bext, iXML, LIST, SMED, cue, etc.) are skipped.
// Advance past this chunk's body, honoring RIFF even-byte padding.
std::size_t advance = bodySize;
if (advance & 1u) ++advance; // RIFF pad byte
if (advance > bytes.size() - bodyOffset) break; // overrun guard
pos = bodyOffset + advance;
}
if (haveFmt && haveData) {
char buf[17];
std::snprintf(buf, sizeof(buf), "%016llx",
static_cast<unsigned long long>(h));
return std::string(buf);
}
// Falls through to whole-file fallback if chunks were missing/malformed.
}
// Fallback: not a parseable RIFF/WAVE — hash the whole file (same as the old
// per-call hashBytes). No prefix tag: identical to hashBytes(data, size).
return hashBytes(bytes.data(), bytes.size());
}
std::string normalizeSlashes(const std::string& path) {
std::string out = path;
for (char& c : out) {
if (c == '\\') c = '/';
}
// Strip a single trailing slash so joins do not double up. Preserve a lone
// "/" (root) — stripping it would turn root into empty.
if (out.size() > 1 && out.back() == '/') {
out.pop_back();
}
#ifdef _WIN32
// Windows paths are case-insensitive. Fold to lowercase so that two paths
// that differ only in drive-letter or component casing compare equal (e.g.
// "C:/Foo/BAR.wav" == "c:/foo/bar.wav"). On macOS/Linux, exact case is
// preserved (the filesystem is case-sensitive; folding would be wrong).
for (char& c : out) c = static_cast<char>(std::tolower(static_cast<unsigned char>(c)));
#endif
return out;
}
std::string sanitizeStem(const std::string& baseName) {
std::string out;
out.reserve(baseName.size());
for (unsigned char c : baseName) {
const bool keep = (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z') ||
(c >= '0' && c <= '9') || c == '.' || c == '_' ||
c == '-';
out.push_back(keep ? static_cast<char>(c) : '_');
}
// Collapse to a stable default if nothing usable survived (e.g. all spaces).
// A stem of only separators ('.', '_', '-') is also unhelpful as a name.
bool hasAlnum = false;
for (unsigned char c : out) {
if ((c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z') ||
(c >= '0' && c <= '9')) {
hasAlnum = true;
break;
}
}
if (out.empty() || !hasAlnum) {
return "capture";
}
return out;
}
BankPaths deriveBankPaths(const std::string& projectDir,
const std::string& baseName,
const std::string& uniqueTag) {
const std::string dir = normalizeSlashes(projectDir);
std::string stem = sanitizeStem(baseName);
if (!uniqueTag.empty()) {
stem += "_" + sanitizeStem(uniqueTag);
}
const std::string fileName = stem + ".wav";
// Precondition: the capture shell must resolve a non-empty project directory
// before calling this function. An empty projectDir would produce a bare
// relative "reasampler_bank" path — the silent default-location fallback this
// tool explicitly forbids. Assert in debug; leave absoluteDir empty in release
// so any caller that ignores the precondition fails loudly at the render/stat
// step rather than silently writing to CWD.
assert(!dir.empty() && "deriveBankPaths: projectDir must not be empty");
BankPaths p;
p.fileStem = stem; // stem only — REAPER appends extension
p.fileName = fileName;
p.relativePath = std::string(kBankSubfolder) + "/" + fileName;
// absoluteDir intentionally omits a trailing slash (RENDER_FILE wants the
// directory itself; RENDER_PATTERN supplies the file name separately).
// Empty when precondition is violated (dir empty) — caller must not proceed.
p.absoluteDir = dir.empty() ? std::string{}
: dir + "/" + kBankSubfolder;
return p;
}
std::string bankRelativeForName(const std::string& fileName) {
if (fileName.empty()) return {};
// The SAME expression deriveBankPaths uses for relativePath, kept in one place so
// the two spellings can never drift (Phase R spelling-consistency invariant).
return std::string(kBankSubfolder) + "/" + fileName;
}
std::string resolveBankFile(const std::string& projectDir,
const std::string& relativePath) {
// No default-location fallback (CLAUDE.md invariant): an empty project dir or
// relative path yields empty, not a bare relative path resolved against CWD.
if (projectDir.empty() || relativePath.empty()) {
return {};
}
const std::string dir = normalizeSlashes(projectDir);
const std::string rel = normalizeSlashes(relativePath);
if (dir.empty() || rel.empty()) {
return {};
}
return dir + "/" + rel;
}
std::string projectDirOfRpp(const std::string& rppPath) {
// An unsaved project reports an empty .rpp path; keep it empty so downstream
// resolution refuses (no default-location fallback). Mirrors persist.cpp's prior
// projectDirOf exactly: parent_path of the .rpp, then normalizeSlashes.
if (rppPath.empty()) return {};
std::string dir = std::filesystem::path(rppPath).parent_path().string();
return normalizeSlashes(dir);
}
BankRelocation deriveRelocationPlan(const std::string& oldProjectDir,
const std::string& newProjectDir) {
BankRelocation r;
if (oldProjectDir.empty() || newProjectDir.empty()) {
return r; // needed=false, empty dirs — nothing to relocate
}
const std::string oldDir = normalizeSlashes(oldProjectDir);
const std::string newDir = normalizeSlashes(newProjectDir);
r.oldBankDir = oldDir + "/" + kBankSubfolder;
r.newBankDir = newDir + "/" + kBankSubfolder;
// A Save (in place) leaves the project dir unchanged — nothing to relocate.
// Only a Save-As to a different directory needs the bank moved.
r.needed = (oldDir != newDir);
return r;
}
ProjectTransition classifyProjectTransition(bool sameProjectObject,
const std::string& lastGuid,
const std::string& lastPath,
const std::string& currentGuid,
const std::string& currentPath) {
// 1. The GUID is the identity of record and is checked FIRST. A different
// stored GUID means a genuinely different project is active — Load ITS index.
// This catches the regression that pointer-primary classification missed:
// REAPER RECYCLES ReaProject* addresses across close/open, so a reopened /
// new project can reuse the previous project's address (sameProjectObject ==
// true) while carrying a different stored GUID. Deciding on the pointer alone
// then returned NoOp/SaveAsRelocate and the bank never reloaded. The GUID is
// immune to address recycling, so it leads. Also covers new/unsaved<->saved
// transitions (one GUID empty, the other not) and switching between two
// distinct saved projects.
if (currentGuid != lastGuid) {
return ProjectTransition::Load;
}
// From here currentGuid == lastGuid (they are equal; both may be empty for
// unsaved projects). The pointer now disambiguates the same-GUID case.
// 2. Same GUID but a DIFFERENT object is a forked sibling: Save-As copied our
// GUID onto a distinct project object. Load its (own) index; never relocate.
// Two unsaved projects (both GUIDs empty, distinct objects) also land here —
// Load, so switching between them installs the right in-memory state.
if (!sameProjectObject) {
return ProjectTransition::Load;
}
// 3. Same object AND same GUID with a NEW path is a genuine Save-As (the object
// identity is proven and the record identity is unchanged — only the .rpp
// moved). Also the first save of an unsaved project (both GUIDs empty, old
// path empty): SaveAsRelocate is safe there because deriveRelocationPlan
// no-ops on the empty old dir (empty-GUID safety preserved) while poll()
// mints a GUID.
if (currentPath != lastPath) {
return ProjectTransition::SaveAsRelocate;
}
// 4. Same object, same GUID, same path — Save in place / idle tick.
return ProjectTransition::NoOp;
}
} // namespace reasampler
src/capture_paths.h
-215
View File
@@ -1,215 +0,0 @@
#pragma once
// capture_paths — the REAPER-free path arithmetic behind offline capture.
//
// PURE MODULE (CLAUDE.md §load-bearing split): NO REAPER types, NO SWELL, NO
// vendor/ includes. Standard library only. The capture shell resolves the
// current project directory via REAPER APIs, then hands the raw strings here so
// the fiddly, easy-to-get-wrong path arithmetic (bank subfolder, unique file
// name, absolute render dir, project-relative index path) is unit-tested outside
// the DAW.
//
// Path convention: this module works in forward-slash form and does NOT touch
// the filesystem. The bank subfolder name is a fixed constant so the same
// project always resolves the same bank location (determinism).
#include <cstddef>
#include <cstdint>
#include <string>
#include <vector>
namespace reasampler {
// The project-relative bank subfolder. All captured wavs live here so the bank
// travels with the .rpp (CONTEXT.md §Settled decisions: per-project bank).
inline constexpr const char* kBankSubfolder = "reasampler_bank";
// A resolved pair of paths for one capture: where REAPER must be told to write
// (absolute, because RENDER_FILE wants a directory REAPER can create/open) and
// what we store in the BankIndex (project-relative, because the index is
// relative-paths-only — CLAUDE.md precision invariant).
struct BankPaths {
std::string absoluteDir; // <projectDir>/reasampler_bank (forward slash)
std::string relativePath; // reasampler_bank/<fileName> (index value)
std::string fileName; // <stem>.wav (full file name)
std::string fileStem; // <stem> (RENDER_PATTERN — REAPER appends the extension)
};
// Computes a deterministic FNV-1a 64-bit content hash over `len` bytes at `data`
// and returns it as a 16-character lowercase hex string. Designed to fill
// Sample::contentHash so the confirm-on-last-reference guardrail
// (BankBook::hashReferencedElsewhere) can distinguish "no other bank holds this
// file" from "another bank holds the same file." An empty buffer returns the bare
// FNV-1a 64-bit offset basis in hex (a stable, non-empty sentinel that two empty
// files would share, but real WAV files are never empty).
std::string hashBytes(const std::uint8_t* data, std::size_t len);
// WAV-aware content hash: hashes only the audio-defining content of a 32-bit-float
// RIFF/WAVE file — the `fmt ` chunk body + the `data` chunk payload — skipping all
// other RIFF chunks (e.g. `bext` origination timestamp, `iXML`, `LIST`/`INFO`, SMED).
//
// WHY: REAPER's offline renderer embeds render-varying metadata chunks (at minimum a
// `bext` chunk containing the origination date/time) even when the format config blob
// requests no BWF metadata. Two renders of identical audio therefore differ in those
// bytes, making whole-file hashes diverge and preventing dedup collapse.
//
// DOMAIN SEPARATION: the FNV-1a input is prefixed with the tag byte 'W' (0x57) before
// the fmt/data bytes are fed in, so a content hash can never equal a whole-file
// hashBytes result for a different file of the same size.
//
// FALLBACK: if `bytes` does not parse as a valid RIFF/WAVE with both a `fmt ` and a
// `data` chunk, the function falls back to whole-file hashBytes (no prefix tag) —
// identical to calling hashBytes(bytes.data(), bytes.size()). This ensures that an
// unrecognized or malformed file still gets a non-empty hash rather than silently
// skipping dedup.
//
// Called by both capture commit paths (offline and realtime) in place of the raw
// hashBytes call.
std::string hashWavContent(const std::vector<std::uint8_t>& bytes);
// Normalizes a path to forward slashes and strips any trailing slash. Empty in
// -> empty out. Pure string transform (does not consult the filesystem).
// Platform case rule: on Windows (_WIN32) the result is also lowercased so that
// paths differing only in drive-letter or component casing compare equal (Windows
// paths are case-insensitive). On macOS/Linux the case is preserved exactly (those
// filesystems are case-sensitive).
std::string normalizeSlashes(const std::string& path);
// Sanitizes a caller-supplied base name into a filesystem-safe stem: keeps
// [A-Za-z0-9._-], replaces every other byte (spaces, slashes, quotes, control)
// with '_', and collapses to "capture" if nothing usable remains. Deterministic:
// the same input always yields the same stem (feeds bit-identical file naming).
std::string sanitizeStem(const std::string& baseName);
// Derives the bank paths for one capture.
// projectDir : absolute directory of the current .rpp (any slash style)
// baseName : human base for the file stem (sanitized)
// uniqueTag : caller-supplied disambiguator appended to the stem (e.g. a
// timestamp or counter) so repeated captures do not collide.
// Also sanitized. May be empty.
// Produces "<stem>[_<tag>].wav". The relativePath is always project-relative and
// forward-slashed so it satisfies BankIndex::add's relative-only invariant.
BankPaths deriveBankPaths(const std::string& projectDir,
const std::string& baseName,
const std::string& uniqueTag);
// The project-relative index spelling for a bank file KNOWN ONLY by its file name —
// the forward derivation the Phase R prune shell uses to spell an ENUMERATED folder
// entry the SAME way deriveBankPaths spelled it at capture time. By construction it
// is the identical expression deriveBankPaths().relativePath uses (kBankSubfolder +
// "/" + fileName), so a file the capture path created and a directory listing of that
// same file resolve to the byte-identical relative string — the safety-critical
// spelling-consistency the prune core's exact-string match depends on (a divergence
// here could make a referenced file look like an orphan). fileName is a bare entry
// name (no directory component); the caller supplies forward-slash-free names from the
// folder enumeration. Empty in -> empty out.
std::string bankRelativeForName(const std::string& fileName);
// --- Persist-side path arithmetic (M4) --------------------------------------
//
// The index stores relative paths only; on project load the persist shell must
// turn each entry's relativePath back into an absolute path against the CURRENT
// project directory (so a project opened from a new location still resolves its
// bank). This is the inverse of the relativePath the capture path produced.
//
// projectDir : absolute directory of the current .rpp (any slash style)
// relativePath : a project-relative index entry (e.g. "reasampler_bank/x.wav")
//
// Returns "<projectDir>/<relativePath>" forward-slashed. Returns empty when
// either input is empty (no default-location fallback — CLAUDE.md invariant) so
// a caller that ignores an unsaved/unset project fails loudly rather than
// resolving against CWD.
std::string resolveBankFile(const std::string& projectDir,
const std::string& relativePath);
// The project directory that holds a .rpp: its parent directory, forward-slashed,
// trailing slash stripped. Empty in -> empty out (an unsaved project has an empty
// .rpp path, which must stay empty so resolveBankFile refuses to resolve — the
// no-default-location invariant). This is the M4 convention persist uses to place
// the bank alongside the .rpp; extracted here (pure) so the VST3 instrument resolves
// audio paths the SAME way persist does rather than re-implementing the derivation.
std::string projectDirOfRpp(const std::string& rppPath);
// A relocation plan for the physical bank folder on Save-As to a new project
// location. The index's relative paths do NOT change (they are relative to the
// project dir, which is what moved with the .rpp), so relocation is purely a
// folder move: copy/move the whole bank subfolder from the old project dir to
// the new one. Both dirs are absolute, forward-slashed, trailing-slash-stripped.
struct BankRelocation {
std::string oldBankDir; // <oldProjectDir>/reasampler_bank
std::string newBankDir; // <newProjectDir>/reasampler_bank
bool needed = false; // false when old==new (Save in place, not Save-As)
};
// Derives the relocation plan from the old and new project directories.
// oldProjectDir : project dir the bank currently sits under (any slash style)
// newProjectDir : project dir the .rpp was just saved to (any slash style)
// `needed` is true iff the normalized dirs differ (a genuine Save-As-to-new-dir).
// Returns a plan with empty dirs and needed=false when either input is empty.
BankRelocation deriveRelocationPlan(const std::string& oldProjectDir,
const std::string& newProjectDir);
// --- Project-identity transition (W12 combined identity fix) -----------------
//
// What the persist timer must do on each tick. Identity rests on TWO facts,
// layered GUID-PRIMARY:
// 1. the minted GUID — content-based identity of record, stored in ext state.
// It is IMMUNE to REAPER recycling a closed project's ReaProject* address,
// so it is checked FIRST.
// 2. sameProjectObject — did the same live ReaProject* stay active across the
// two ticks (computed in poll() as `proj == lastProject_`)? Used ONLY to
// disambiguate the same-GUID case: a forked sibling (Save-As copied our GUID
// onto a distinct object) vs a genuine Save-As (one object, new path).
//
// This fix layers both prior designs, GUID-primary. M4 (GUID-only) broke Save-As
// forks: Save-As copies the whole .rpp incl. our stored GUID, so a fork and its
// parent share a GUID on disk. W10 (pointer-primary, GUID voided) broke pointer
// RECYCLING: REAPER reuses a closed project's address, so a reopened/new project
// can present the previous project's pointer with a different stored GUID —
// pointer-primary read that as NoOp/SaveAsRelocate and the bank never reloaded.
// Checking the GUID first catches recycling; the pointer then separates a fork
// (same GUID, different object -> Load) from a Save-As (same GUID, same object,
// new path -> relocate).
//
// The load-bearing rule: a DIFFERENT record identity (GUID) is always a Load; a
// DIFFERENT project object with the same GUID is a fork Load, never a relocate.
enum class ProjectTransition {
NoOp, // same object, same GUID, same location — nothing to do
Load, // a different project is active — load ITS index from ext state
SaveAsRelocate, // SAME object + SAME GUID, new .rpp location — relocate the bank
};
// Classifies what a poll tick observed.
// sameProjectObject : true iff the SAME ReaProject* stayed active across the two
// ticks (poll() computes `proj == lastProject_`). The pure
// classifier takes the bool, not the raw pointer, to stay
// REAPER-free and testable.
// lastGuid : the GUID of the project persist last acted on ("" if none/unsaved)
// lastPath : that project's .rpp path when last seen ("" if unsaved)
// currentGuid : the GUID stored in the now-active project's ext state ("" if
// unsaved or never written)
// currentPath : the now-active project's .rpp path ("" if unsaved)
//
// Rules (evaluated in EXACTLY this order):
// 1. currentGuid != lastGuid -> Load (different record identity:
// recycled pointer w/ different GUID,
// new/unsaved<->saved, or two distinct
// saved projects)
// 2. !sameProjectObject -> Load (same GUID, different object:
// forked sibling, or two unsaved projects)
// 3. currentPath != lastPath -> SaveAsRelocate (same object + same GUID,
// new path: genuine Save-As, or first save
// of an unsaved project — relocate no-ops
// on the empty old dir, poll() mints a GUID)
// 4. otherwise -> NoOp (same object, same GUID, same path)
//
// The GUID (identity of record) leads; the pointer only disambiguates the same-GUID
// case (fork-Load in step 2 vs Save-As in step 3). The empty-GUID safety (unsaved
// projects never physically relocate) is preserved because an empty old project dir
// makes deriveRelocationPlan's `needed` false.
ProjectTransition classifyProjectTransition(bool sameProjectObject,
const std::string& lastGuid,
const std::string& lastPath,
const std::string& currentGuid,
const std::string& currentPath);
} // namespace reasampler
src/capture_realtime.cpp
-867
View File
@@ -1,867 +0,0 @@
// capture_realtime.cpp — REAPER-facing realtime-record backend (RealtimeRecordBackend).
//
// Compiled into the reaper_reasampler MODULE. Includes reaper_plugin_functions.h
// WITHOUT REAPERAPI_IMPLEMENT — main.cpp is the one TU that defines the API
// pointers; here they are extern (CLAUDE.md §contract).
//
// Captures the requested scope over the requested range by RECORDING in realtime
// (transport-driven) into a hidden temp track, then moves the recorded file into
// the bank as a Sample — non-destructively. This increment implements the TRACK
// scope only (records the selected track's own output). Item realtime is deferred
// (UnsupportedMode) rather than silently half-built.
//
// ============================================================================
// §ASYNC — timer-driven, no UI block (M8 rework — Daniel: "do it right")
// ============================================================================
// A realtime record takes (end - start) wall-clock seconds. The earlier spike ran a
// bounded MAIN-THREAD wait for the transport to reach the range end — which FREEZES
// REAPER's UI for the whole record. That is gone. The record is now driven across
// timer ticks:
// begin() — validate, snapshot ALL state to restore, create the temp track,
// route the source-track tap, arm, CSurf_OnRecord, RETURN IMMEDIATELY.
// tick() — (from OnTimer, the same tick as session.poll()) read the transport,
// and on a terminal verdict stop + finalize/abort + RESTORE everything.
// abort() — force-terminate now (shutdown / project switch) + RESTORE everything.
//
// The snapshot + restore live on RealtimeCaptureState (below), NOT a function-scope
// RAII guard — because the record spans ticks, no single stack frame outlives it.
// restore() is idempotent (a restored_ latch): every terminal path — normal
// completion, user stop, error, second-capture reject, project switch, unload —
// funnels through the SAME single restore, safe to call once from whichever fires.
// The pure record-mode bookkeeping, the recorded-file->Sample mapping, and the
// completion state machine (advanceRecordPhase) all live in realtime_record.{h,cpp}
// (unit-tested outside the DAW). This TU owns only the REAPER-bound recipe.
//
// ============================================================================
// §TAP — track-output tap (selected track's own output, PRE-parent)
// ============================================================================
// The recipe: the hidden temp track RECEIVES a send FROM each selected source track
// (CreateTrackSend(source, temp)). The temp track records its OWN output
// (I_RECMODE 3/6, latency-compensated) with B_MAINSEND=0 (it does NOT sum back into
// the master — no feedback, no monitoring double). Multiple selected tracks each get
// a send into the one temp track, so their outputs SUM in the temp track — matching
// how offline track scope handles a multi-track selection.
//
// WHY THIS FAITHFULLY CAPTURES THE TRACK'S OUTPUT — and why NO FxBypassGuard:
// A CreateTrackSend defaults to I_SENDMODE=0 (post-fader) with I_SRCCHAN=0
// (channel offset 0, (srcchan>>10)==0 => full stereo — SDK ~3302/3304). Post-fader
// taps the source track AFTER its own FX and AFTER its own fader/pan — i.e. exactly
// the track's OWN OUTPUT — but BEFORE the parent/folder/master sums it. The send is
// a branch off the signal at the track's output stage; the parent chain downstream
// of that branch is not in the tapped path AT ALL. So the tap is chain-independent
// BY CONSTRUCTION: there is nothing to neutralize, and FxBypassGuard (which mutates
// the live chain, altering the user's monitoring) is deliberately NOT used. This is
// the realtime analogue of offline track scope (item + the track's own FX + its own
// fader/pan; parent/folder/master excluded), reached without touching any live FX.
//
// This ALSO fixes the earlier silent-file bug: that spike sent FROM the master INTO
// a temp track, which REAPER refuses to carry (master->track is a feedback loop), so
// the temp recorded silence. A regular track->track send has no feedback — it works.
//
// Non-destructive: the temp track is deleted on teardown, which removes every send we
// created INTO it (REAPER cannot leave a send dangling to a deleted destination) — so
// NO source track retains any routing change. We never mutate any existing track's
// persistent state; we only add sends FROM the source tracks that vanish with the
// temp track. The selected source tracks are UNCHANGED after capture.
//
// Item realtime is deferred (UnsupportedMode): item scope would need per-item take
// isolation on top of the tap, which is a separate increment.
#include "capture.h"
#include <chrono>
#include <cstdint>
#include <cstring>
#include <ctime>
#include <filesystem>
#include <fstream>
#include <string>
#include <vector>
#include "capture_paths.h" // hashBytes, deriveBankPaths
#include "peaks.h" // lastFrameAboveThreshold, AudioSample
#include "realtime_record.h"
#include "render_settings.h" // autoTrimEndRatio, realtimeRecordWindowEnd
#include "wav_trim.h" // parseWavLayout, extractFloatFrames, planWavTruncate
#define REAPERAPI_MINIMAL
#define REAPERAPI_WANT_EnumProjects
#define REAPERAPI_WANT_Main_SaveProject
#define REAPERAPI_WANT_Master_GetTempo
#define REAPERAPI_WANT_TimeMap_GetTimeSigAtTime
#define REAPERAPI_WANT_GetSetProjectInfo
#define REAPERAPI_WANT_InsertTrackAtIndex
#define REAPERAPI_WANT_DeleteTrack
#define REAPERAPI_WANT_CountTracks
#define REAPERAPI_WANT_GetTrack
#define REAPERAPI_WANT_CreateTrackSend
#define REAPERAPI_WANT_GetMediaTrackInfo_Value
#define REAPERAPI_WANT_SetMediaTrackInfo_Value
#define REAPERAPI_WANT_GetTrackNumMediaItems
#define REAPERAPI_WANT_GetTrackMediaItem
#define REAPERAPI_WANT_GetMediaItemTake
#define REAPERAPI_WANT_GetMediaItemTake_Source
#define REAPERAPI_WANT_GetMediaSourceFileName
#define REAPERAPI_WANT_CSurf_OnRecord
#define REAPERAPI_WANT_OnStopButtonEx
#define REAPERAPI_WANT_GetPlayStateEx
#define REAPERAPI_WANT_GetPlayPositionEx
#define REAPERAPI_WANT_GetSet_LoopTimeRange
#define REAPERAPI_WANT_GetCursorPosition
#define REAPERAPI_WANT_SetEditCurPos
#define REAPERAPI_WANT_ValidatePtr2
#include "reaper_plugin_functions.h"
namespace reasampler {
namespace {
// A monotonic, filesystem-safe timestamp tag so repeated captures do not collide.
std::string makeUniqueTag() {
std::time_t now = std::time(nullptr);
return "rt-" + std::to_string(static_cast<long long>(now));
}
std::string normSlashes(std::string s) {
for (char& c : s) if (c == '\\') c = '/';
if (s.size() > 1 && s.back() == '/') s.pop_back();
return s;
}
// Reads the ACTIVE project's .rpp path (empty if unsaved). Only needed at begin()
// time, when the record's project IS the active project.
std::string readRppPath() {
std::vector<char> buf(4096, '\0');
EnumProjects(-1, buf.data(), static_cast<int>(buf.size()));
return std::string(buf.data());
}
// Discovers the file REAPER actually recorded onto the temp track: the first media
// item's active take's source file. Empty string if nothing was recorded.
std::string recordedFilePath(MediaTrack* temp) {
if (!temp) return {};
if (GetTrackNumMediaItems(temp) <= 0) return {};
MediaItem* item = GetTrackMediaItem(temp, 0);
if (!item) return {};
MediaItem_Take* take = GetMediaItemTake(item, 0);
if (!take) return {};
PCM_source* src = GetMediaItemTake_Source(take);
if (!src) return {};
std::vector<char> buf(4096, '\0');
GetMediaSourceFileName(src, buf.data(), static_cast<int>(buf.size()));
return std::string(buf.data());
}
// The recorded file's current size in bytes, or -1 if it cannot be resolved yet (no
// item/take/source, or the file does not exist on disk this tick). Used by the flush
// wait to detect stability (size unchanged across a tick) BEFORE moving the file — a
// take REAPER is still flushing on the audio thread grows tick over tick.
std::int64_t recordedFileSize(MediaTrack* temp) {
const std::string path = recordedFilePath(temp);
if (path.empty()) return -1;
std::error_code ec;
const auto sz = std::filesystem::file_size(path, ec);
if (ec) return -1;
return static_cast<std::int64_t>(sz);
}
} // namespace
// ============================================================================
// RealtimeCaptureState — the in-flight snapshot + idempotent restore
// ============================================================================
// Holds EVERYTHING to restore across the many ticks the record spans (temp track +
// its receive-sum sends, other tracks' I_RECARM, transport, edit cursor, time selection),
// plus the request echo needed to finalize the Sample. restore() is idempotent
// (restored_ latch) and is the single teardown every terminal path calls.
class RealtimeCaptureState {
public:
// Bound at begin(): the record's OWN project (transport reads use *Ex(proj_) so
// a project switch mid-record cannot read the wrong transport), the request
// echo, and the resolved bank paths + tag for finalize.
ReaProject* proj_ = nullptr;
CaptureRequest request_;
BankPaths paths_;
std::string uniqueTag_;
// The RECORDED window end in project seconds (>= request_.endSeconds). For a tail
// mode the transport runs PAST the range end (Auto: +8 s cap; Manual: +the set
// length), so this — not request_.endSeconds — is the end the completion state
// machine waits for. Equals request_.endSeconds for TailMode::None (exact bounds).
double recordWindowEnd_ = 0.0;
// The transient sink. The sends we create (from each selected source track INTO
// temp_) live on those source tracks pointing AT temp_, and are removed automatically
// when temp_ is deleted — REAPER cannot leave a send dangling to a deleted
// destination. So there is no separate send handle to track here.
MediaTrack* temp_ = nullptr;
// The record phase (pure state machine drives the transition). Starts Recording.
RecordPhase phase_ = RecordPhase::Recording;
// Wall-clock anchors for the pure machine's safety ceilings (a steady clock — not
// the play cursor — so a stuck/looping transport is still caught, review §3).
// begunAt_ is set at begin(); finalizingAt_ is set on the Recording->Finalizing
// edge (the transport stop) so the flush wait is bounded from the stop, not begin.
std::chrono::steady_clock::time_point begunAt_{};
std::chrono::steady_clock::time_point finalizingAt_{};
// Deferred-finalize (review §2) flush tracking: the recorded file's size the
// previous tick, so "size unchanged across a tick" signals REAPER finished
// flushing/closing the take. -1 = not yet seen.
std::int64_t lastFileSize_ = -1;
void markElapsedStart() { begunAt_ = std::chrono::steady_clock::now(); }
double elapsedSeconds() const {
return std::chrono::duration<double>(
std::chrono::steady_clock::now() - begunAt_).count();
}
// Set the flush-wait anchor once, on the first Finalizing tick.
void markFinalizingStartOnce() {
if (finalizingAt_.time_since_epoch().count() == 0)
finalizingAt_ = std::chrono::steady_clock::now();
}
double finalizingSeconds() const {
if (finalizingAt_.time_since_epoch().count() == 0) return 0.0;
return std::chrono::duration<double>(
std::chrono::steady_clock::now() - finalizingAt_).count();
}
// Snapshot of state to restore. Filled at begin(), replayed once by restore().
double curPos_ = 0.0;
double tsStart_ = 0.0;
double tsEnd_ = 0.0;
struct ArmSnap { MediaTrack* track; double recarm; };
std::vector<ArmSnap> armSnaps_;
// Snapshot the transport-adjacent state (cursor + time selection) and every
// OTHER track's arm, disarming them so only our sink records. Call ONCE, before
// the temp track exists (so the temp track is never in the arm snapshot).
void snapshotAndDisarmOthers() {
curPos_ = GetCursorPosition();
GetSet_LoopTimeRange(false, false, &tsStart_, &tsEnd_, false);
const int n = CountTracks(proj_);
for (int i = 0; i < n; ++i) {
MediaTrack* tr = GetTrack(proj_, i);
if (!tr) continue;
const double armed = GetMediaTrackInfo_Value(tr, "I_RECARM");
if (armed != 0.0) {
armSnaps_.push_back({tr, armed});
SetMediaTrackInfo_Value(tr, "I_RECARM", 0.0);
}
}
}
// The single, idempotent teardown. Called on EVERY terminal path (normal
// completion, user stop, error, project switch, unload). Safe to call more than
// once — the restored_ latch makes every call after the first a no-op. Order:
// 1. stop the transport if anything is still running (we own it),
// 2. delete the temp track (drops its receive-sum sends + the recorded item),
// 3. restore every other track's arm,
// 4. restore the time selection + edit cursor.
// Stop the record's OWN project transport if it is still playing/recording. Uses
// the project-scoped OnStopButtonEx(proj_) (not the global CSurf_OnStop) so a
// project switch mid-record — where proj_ is no longer the ACTIVE project — stops
// OUR project's transport, never the foreign now-active one. &1=playing,
// &4=recording. Idempotent to call (the playstate guard makes a repeat a no-op).
void stopOwnTransport() {
if (GetPlayStateEx(proj_) & (1 | 4)) OnStopButtonEx(proj_);
}
// Is the captured project STILL OPEN? (review §1 — CRITICAL). If the captured
// project was CLOSED mid-record, proj_/temp_ point at freed memory;
// touching them (stopOwnTransport, DeleteTrack, arm restore) is a use-after-free.
// ValidatePtr2 with a null project validates the ReaProject* itself (the header:
// "proj is ignored if pointer is itself a project"). Every teardown that
// dereferences a captured REAPER object MUST gate on this first.
bool captureProjectStillOpen() const {
return proj_ && ValidatePtr2(nullptr, proj_, "ReaProject*");
}
// Drop the handle WITHOUT touching any REAPER state — for the closed-project case
// (review §1). A closed project already reclaimed its temp track, arms, and
// transport; there is nothing to restore and the pointers are freed. Latch
// restored_ so any later terminal path is a no-op (idempotent), but skip every
// REAPER call restore() would make.
void dropWithoutRestore() {
restored_ = true;
temp_ = nullptr;
armSnaps_.clear();
}
void restore() {
if (restored_) return;
restored_ = true;
// 1. Transport: stop OUR project's if still running (usually already stopped
// by the terminal path's explicit stop-before-finalize — a safe no-op then).
stopOwnTransport();
// 2. Temp track: deleting it drops the source-track sends (REAPER removes every
// send whose destination is deleted — no source track is left mutated) AND the
// recorded arrange item in one move — nothing stays behind (load-bearing).
if (temp_) { DeleteTrack(temp_); temp_ = nullptr; }
// 3. Other tracks' record-arm.
for (const ArmSnap& s : armSnaps_)
SetMediaTrackInfo_Value(s.track, "I_RECARM", s.recarm);
armSnaps_.clear();
// 4. Time selection + edit cursor (no view move, no seek).
GetSet_LoopTimeRange(true, false, &tsStart_, &tsEnd_, false);
SetEditCurPos(curPos_, false, false);
}
bool restored() const { return restored_; }
bool finalized() const { return finalized_; }
void markFinalized() { finalized_ = true; }
private:
bool restored_ = false;
bool finalized_ = false;
};
namespace {
// Reads the whole file into a byte buffer. Empty vector on any I/O failure — the
// caller treats an unreadable file as "skip the trim" (keep the untrimmed window),
// never as a corruption of the recorded audio.
std::vector<std::uint8_t> readAllBytes(const std::string& path) {
std::ifstream f(path, std::ios::binary | std::ios::ate);
if (!f) return {};
const std::streamoff size = f.tellg();
if (size <= 0) return {};
std::vector<std::uint8_t> bytes(static_cast<std::size_t>(size));
f.seekg(0);
f.read(reinterpret_cast<char*>(bytes.data()), size);
if (!f) return {};
return bytes;
}
// Patches a little-endian uint32 into a byte buffer at `off` (the header size fields).
void writeU32LE(std::vector<std::uint8_t>& bytes, std::size_t off, std::uint32_t v) {
bytes[off + 0] = static_cast<std::uint8_t>(v & 0xFF);
bytes[off + 1] = static_cast<std::uint8_t>((v >> 8) & 0xFF);
bytes[off + 2] = static_cast<std::uint8_t>((v >> 16) & 0xFF);
bytes[off + 3] = static_cast<std::uint8_t>((v >> 24) & 0xFF);
}
// ============================================================================
// §TAIL — Auto-mode PCM decay-scan trim (docs/product/capture-tail.md §realtime)
// ============================================================================
// After the recorded file is stable and moved into the bank (the file we OWN — never
// the project), Auto mode trims the trailing decay: read the WAV, scan the tail
// region (frames AFTER the original range end) backward for the last frame above
// -72 dB, and truncate the file there. Rules (spec):
// * no frame in the tail window above -72 dB -> trim back to the original range end
// * signal never falls below -72 dB in window -> keep the full window (cap did its job)
// * otherwise -> trim one frame past the last audible
//
// Returns the trimmed length in SECONDS (for the Sample), or a negative value to
// signal "no trim applied" (caller keeps the pre-trim length). Best-effort and
// non-fatal: any unreadable/unknown/short file skips the trim (keeps the full window)
// rather than risk corrupting the capture — realtime tail is a convenience path.
//
// FORMAT / FLUSH ASSUMPTIONS (DAW-verify): the recorded file is a canonical 32-bit
// float WAV (REAPER project record format — the manual procedure sets it) and is fully
// flushed/closed before this runs (the tick() Finalizing size-stable wait guarantees
// that for the normal path; abort()'s best-effort finalize races it, documented).
double trimAutoTailInPlace(const std::string& path,
double rangeStartSeconds,
double rangeEndSeconds) {
constexpr double kNoTrim = -1.0;
std::vector<std::uint8_t> bytes = readAllBytes(path);
if (bytes.empty()) return kNoTrim;
const reasampler::WavLayout layout = parseWavLayout(bytes);
if (!layout.valid || layout.sampleRate == 0) return kNoTrim; // not a WAV we trim
const std::size_t totalFrames = layout.frameCount();
if (totalFrames == 0) return kNoTrim;
// The original range end as a frame index within the file (frame 0 == start). Use
// the FILE's own sample rate (authoritative) — the request rate may be 0 (=follow
// project). Clamp to the file so a rounding overshoot cannot exceed it.
const double rangeSeconds = rangeEndSeconds - rangeStartSeconds;
if (rangeSeconds <= 0.0) return kNoTrim;
std::size_t rangeEndFrame = static_cast<std::size_t>(
rangeSeconds * static_cast<double>(layout.sampleRate) + 0.5);
if (rangeEndFrame > totalFrames) rangeEndFrame = totalFrames;
// Nothing recorded past the range end (the tail window was empty) -> nothing to
// trim; keep as-is. (Shouldn't happen for Auto, but total by construction.)
if (rangeEndFrame >= totalFrames) return kNoTrim;
// Scan ONLY the tail region (frames after the original range end). The trim never
// eats into the range body — the scan starts at rangeEndFrame.
const std::size_t tailFrames = totalFrames - rangeEndFrame;
const std::vector<reasampler::AudioSample> tailPcm =
extractFloatFrames(bytes, layout, rangeEndFrame, tailFrames);
if (tailPcm.empty()) return kNoTrim;
const float threshold = static_cast<float>(reasampler::autoTrimEndRatio());
const std::size_t lastAbove = reasampler::lastFrameAboveThreshold(
tailPcm, layout.channelCount, tailFrames, threshold);
// keptFrames: the total frame count the trimmed file retains.
// no audible tail frame -> trim back to the range end (rangeEndFrame frames)
// an audible frame at idx -> keep range body + up to and including that frame
// The "signal never falls below threshold" case falls out naturally: lastAbove is
// the final tail frame, so keptFrames == totalFrames (the full window is kept).
std::size_t keptFrames;
if (lastAbove == reasampler::kNoFrameAboveThreshold) {
keptFrames = rangeEndFrame;
} else {
keptFrames = rangeEndFrame + (lastAbove + 1);
}
if (keptFrames >= totalFrames) return kNoTrim; // full window kept -> no truncate
const reasampler::WavTruncatePlan plan = planWavTruncate(layout, keptFrames);
if (!plan.valid) return kNoTrim;
// Patch the RIFF + data size fields in the in-memory buffer so they describe the
// kept frame count, then rewrite the file as exactly the first newFileByteLength
// bytes (header + patched sizes + retained PCM). A single truncating write is the
// simplest correct truncate — no separate resize step, no partial-write window
// where the on-disk sizes and length disagree. The result is a valid, playable WAV
// of the kept frames (verified by the wav_trim re-parse test).
writeU32LE(bytes, plan.dataSizeFieldOffset, plan.newDataSize);
writeU32LE(bytes, plan.riffSizeFieldOffset, plan.newRiffSize);
// NOTE (DAW-verify, best-effort): a truncating write that fails MID-write (a full
// disk, a yanked drive) would leave a short file while we return kNoTrim, so the
// Sample length would overstate the file. Vanishingly unlikely for a just-recorded
// local bank file, and realtime tail is a convenience path, so a temp-file+atomic-
// rename is not warranted here; flagged rather than built.
std::ofstream out(path, std::ios::binary | std::ios::trunc);
if (!out) return kNoTrim; // could not reopen to rewrite — leave the full file
out.write(reinterpret_cast<const char*>(bytes.data()),
static_cast<std::streamsize>(plan.newFileByteLength));
if (!out) return kNoTrim;
out.close();
// The trimmed length in seconds for the Sample metadata.
return static_cast<double>(keptFrames) / static_cast<double>(layout.sampleRate);
}
// Builds a CaptureResult for a finalized recording: discover the recorded file,
// move it into the bank, populate the Sample via the pure mapping. Returns Ok +
// Sample on success, or a RenderFailed result. Does NOT restore — the caller
// restores unconditionally afterward (finalize + restore are separate steps so a
// finalize failure still restores).
CaptureResult finalizeRecording(RealtimeCaptureState& st) {
CaptureResult result;
const std::string recorded = normSlashes(recordedFilePath(st.temp_));
if (recorded.empty() || !std::filesystem::exists(recorded)) {
result.status = CaptureStatus::RenderFailed;
result.message = "Realtime record produced no file (check transport/record "
"settings in the DAW).";
return result;
}
std::error_code ec;
std::filesystem::create_directories(st.paths_.absoluteDir, ec);
const std::string destPath = st.paths_.absoluteDir + "/" + st.paths_.fileName;
std::filesystem::rename(recorded, destPath, ec);
if (ec) {
// Cross-volume rename can fail; fall back to copy+remove.
ec.clear();
std::filesystem::copy_file(
recorded, destPath,
std::filesystem::copy_options::overwrite_existing, ec);
if (ec) {
result.status = CaptureStatus::RenderFailed;
result.message = "Recorded file could not be moved into the bank: " +
ec.message();
return result;
}
std::error_code rmEc;
std::filesystem::remove(recorded, rmEc); // best-effort
}
// TAIL (Auto): trim the trailing decay of the recorded window in place — on the
// BANK file we now own (destPath), never the project. Best-effort: an unreadable /
// unknown-format / short file skips the trim (keeps the full window) rather than
// corrupt the capture. Only Auto trims; None recorded exact bounds and Manual is a
// fixed window (spec §The realtime path). Returns the trimmed length in seconds,
// or < 0 for "no trim applied".
double trimmedLenSeconds = -1.0;
if (st.request_.tailMode == TailMode::Auto) {
trimmedLenSeconds = trimAutoTailInPlace(destPath,
st.request_.startSeconds,
st.request_.endSeconds);
}
RecordedCapture cap;
cap.relativePath = st.paths_.relativePath;
cap.uniqueTag = st.uniqueTag_;
cap.sourceMode = SourceMode::Realtime;
cap.startSeconds = st.request_.startSeconds;
cap.endSeconds = st.request_.endSeconds;
cap.wetDry = st.request_.wetDry;
cap.displayName = st.request_.baseName;
cap.trackGuids = st.request_.trackGuids;
cap.channelCount = st.request_.channelCount;
cap.sampleRate = (st.request_.sampleRate > 0)
? st.request_.sampleRate
: static_cast<int>(GetSetProjectInfo(st.proj_, "PROJECT_SRATE", 0.0, false));
cap.captureTempo = Master_GetTempo();
// Time signature at the record range's START (L7 F1). TimeMap_GetTimeSigAtTime
// (reaper_plugin_functions.h:7130) reads the meter effective at that project time;
// proj=st.proj_ pins the recording's own project. tempoOut ignored (captureTempo is
// the master tempo above). Leaves 0/0 (unstamped) on any failure.
{
int tsNum = 0, tsDenom = 0;
double tsTempo = 0.0;
TimeMap_GetTimeSigAtTime(st.proj_, st.request_.startSeconds, &tsNum, &tsDenom, &tsTempo);
cap.captureTimeSigNum = tsNum;
cap.captureTimeSigDenom = tsDenom;
}
cap.createdTimestamp = static_cast<std::int64_t>(std::time(nullptr));
result.status = CaptureStatus::Ok;
result.sample = sampleFromRecordedCapture(cap);
// Content hash: WAV-aware FNV-1a over the (possibly trimmed) bank file's fmt+data
// chunks so hashReferencedElsewhere can identify copies in other banks and suppress
// the last-reference confirm when another bank still holds the same file. Using
// hashWavContent (not the raw hashBytes) skips render-varying metadata chunks
// (bext origination timestamp, iXML, LIST/INFO, etc.) so two records of identical
// audio collapse to the same hash. Best-effort: an unreadable file leaves
// contentHash empty — the safe, confirm-eliciting direction (bank_model treats
// "" as non-participating).
{
const std::vector<std::uint8_t> fileBytes = readAllBytes(destPath);
if (!fileBytes.empty()) {
result.sample.contentHash = hashWavContent(fileBytes);
}
}
// The recorded file's true length differs from the request range when a tail was
// recorded, so the Sample length must reflect the FILE, not the range:
// Auto with a trim applied -> the trimmed length trimAutoTailInPlace returned.
// Auto with no trim, or Manual -> the full recorded window (end - start).
// None -> the exact range (unchanged; recordWindowEnd_ == endSeconds).
// sampleFromRecordedCapture already set lengthSeconds = end - start; override it
// to the recorded/trimmed length so downstream (thumbnail, placement) matches disk.
if (trimmedLenSeconds >= 0.0) {
result.sample.lengthSeconds = trimmedLenSeconds;
} else {
result.sample.lengthSeconds =
st.recordWindowEnd_ - st.request_.startSeconds;
}
result.message = "Realtime-captured [" +
std::to_string(st.request_.startSeconds) + "s, " +
std::to_string(st.request_.endSeconds) + "s] (recorded " +
std::to_string(result.sample.lengthSeconds) + "s) -> " +
st.paths_.relativePath;
return result;
}
} // namespace
// ============================================================================
// begin — start the record, snapshot, return immediately (no UI block)
// ============================================================================
void RealtimeCaptureStateDeleter::operator()(RealtimeCaptureState* p) const noexcept {
delete p; // full type is visible here — keeps capture.h REAPER-free
}
RealtimeCaptureHandle
RealtimeRecordBackend::begin(const CaptureRequest& request,
const std::vector<MediaTrack*>& sourceTracks,
CaptureResult& outFailure) {
// Only the track scope is implemented this increment (see §TAP). Item realtime
// is deferred — it needs per-item take isolation on top of the track-output tap.
if (request.sourceMode != SourceMode::SelectedTracks) {
outFailure.status = CaptureStatus::UnsupportedMode;
outFailure.message = "RealtimeRecordBackend implements TRACK scope only this "
"increment (item realtime is deferred).";
return nullptr;
}
// Track scope needs at least one source track to tap. No selection -> refuse
// (matching offline track scope's no-op on an empty selection).
if (sourceTracks.empty()) {
outFailure.status = CaptureStatus::UnsupportedMode;
outFailure.message = "No track selected — realtime track capture needs at least "
"one selected track to tap.";
return nullptr;
}
// Exact bounds: refuse an empty/inverted range rather than record silence.
if (!(request.endSeconds > request.startSeconds)) {
outFailure.status = CaptureStatus::EmptyRange;
outFailure.message = "Capture range is empty (end <= start).";
return nullptr;
}
ReaProject* proj = EnumProjects(-1, nullptr, 0);
if (!proj) {
outFailure.status = CaptureStatus::NoProject;
outFailure.message = "No active project.";
return nullptr;
}
// Refuse if the transport is already playing/recording — we own the transport for
// the capture window and must not hijack a user's live take.
if (GetPlayStateEx(proj) & (1 | 4)) {
outFailure.status = CaptureStatus::TransportBusy;
outFailure.message = "Transport is already playing/recording — realtime capture "
"refused. Stop the transport first.";
return nullptr;
}
// Saved-project gate (same as offline): the bank folder resolves against the
// .rpp parent. Prompt Save-As once when unsaved; refuse if still unsaved.
std::string rppPath = readRppPath();
if (rppPath.empty()) {
Main_SaveProject(proj, true); // DAW-only: opens Save-As, blocks (verify)
rppPath = readRppPath();
}
if (rppPath.empty()) {
outFailure.status = CaptureStatus::NoProject;
outFailure.message = "Project must be saved before capture — nothing captured.";
return nullptr;
}
const std::string projectDir =
normSlashes(std::filesystem::path(rppPath).parent_path().string());
// --- Build the in-flight state (owns the snapshot + teardown) ---------------
RealtimeCaptureHandle st(new RealtimeCaptureState());
st->proj_ = proj;
st->request_ = request;
st->uniqueTag_ = makeUniqueTag();
st->paths_ = deriveBankPaths(projectDir, request.baseName, st->uniqueTag_);
// The recorded window end: extended past the range end for a tail mode (Auto/Manual),
// exact for None. This — not request.endSeconds — is what the completion machine
// waits for; the extra window past the range end is trimmed later (Auto) or kept
// (Manual). Pure mapping (render_settings), shared caps with the offline tail.
st->recordWindowEnd_ = realtimeRecordWindowEnd(request.tailMode,
request.endSeconds,
request.tailMs);
// DELIBERATE: the transient temp-track / arm / send / transport mutations are NOT
// wrapped in an Undo_BeginBlock/Undo_EndBlock — divergence from the insert/view
// shells is intentional. This backend fully restores its own state across every
// terminal path (the restore() latch); an undo point would surface an internal,
// fully-reversed scaffold in the user's undo history for no user-meaningful action.
// Snapshot cursor + time selection, and disarm every OTHER track BEFORE the temp
// track exists (so it is never in the arm snapshot and keeps the arm we set).
st->snapshotAndDisarmOthers();
// Hidden temp track at the end: no default FX/envelopes (clean sink), hidden from
// both panels, B_MAINSEND=0 so it does NOT sum back into the master (monitoring
// invariant — it would otherwise double the tapped tracks in the user's monitoring).
const int idx = CountTracks(proj);
InsertTrackAtIndex(idx, false);
st->temp_ = GetTrack(proj, idx);
if (!st->temp_) {
outFailure.status = CaptureStatus::RenderFailed;
outFailure.message = "Could not create the hidden temp record track.";
st->restore(); // undo the disarm + cursor/time-sel snapshot
return nullptr;
}
SetMediaTrackInfo_Value(st->temp_, "B_SHOWINTCP", 0.0);
SetMediaTrackInfo_Value(st->temp_, "B_SHOWINMIXER", 0.0);
SetMediaTrackInfo_Value(st->temp_, "B_MAINSEND", 0.0);
// Route the TRACK-OUTPUT tap: a send FROM each selected source track INTO the temp
// track (CreateTrackSend(source, temp)). The temp records its OWN output, so the
// sends' outputs SUM in it — multiple selected tracks are captured together (same as
// offline track scope). See §TAP for why this faithfully captures each track's own
// output and needs no FxBypassGuard.
//
// Sends default to post-fader (I_SENDMODE 0) and full-stereo (I_SRCCHAN default,
// (srcchan>>10)==0 — SDK ~3302/3304): post-fader = after the source track's FX and
// fader/pan = the track's OWN output, tapped BEFORE the parent sums it. Left at
// defaults deliberately — that IS the track-scope tap point.
//
// DAW-ONLY ASSUMPTION (flag): that a post-fader track->temp send + output-record
// reproduces the track's own output sample-for-sample (latency comp, pan law,
// mono/stereo folding) is the crux to verify live.
int sendsMade = 0;
for (MediaTrack* src : sourceTracks) {
if (!src || src == st->temp_) continue;
if (CreateTrackSend(src, st->temp_) >= 0) ++sendsMade;
}
if (sendsMade == 0) {
// Every send failed (should not happen for valid selected tracks). Refuse
// rather than record a guaranteed-silent file.
outFailure.status = CaptureStatus::RenderFailed;
outFailure.message = "Could not route any selected track into the record tap — "
"nothing to capture.";
st->restore(); // deleting the temp track drops any partial sends too
return nullptr;
}
// Record-mode values from the pure planner. The temp track records its OWN output;
// it has no FX and unity fader, so its post-fader output equals the summed sends.
// Track scope is fully wet -> PostFader. (The actual track-scope tap point is the
// source sends' default post-fader mode; the temp's recmode only records the sum.)
const OutputTap tap = outputTapForWetDry(request.wetDry);
const RecordModePlan rec = recordModePlanFor(request.channelCount, tap);
SetMediaTrackInfo_Value(st->temp_, "I_RECMODE", static_cast<double>(rec.recMode));
SetMediaTrackInfo_Value(st->temp_, "I_RECMODE_FLAGS",
static_cast<double>(rec.recModeFlags));
SetMediaTrackInfo_Value(st->temp_, "I_RECARM", 1.0); // arm ONLY the sink
SetMediaTrackInfo_Value(st->temp_, "I_RECMON", 0.0); // no input monitoring
// Record range: time selection over [start, recordWindowEnd], play cursor at start.
// recordWindowEnd extends past the request's range end for a tail mode so the
// transport captures the decaying tail; it equals the range end for None (exact
// bounds). Both cursor + time selection were snapshotted and are restored by
// restore().
double rs = request.startSeconds, re = st->recordWindowEnd_;
GetSet_LoopTimeRange(true, false, &rs, &re, false);
SetEditCurPos(request.startSeconds, false, false);
// Start the transport and RETURN. tick() drives the rest across timer ticks.
//
// DAW-ONLY ASSUMPTION (flag): CSurf_OnRecord starts recording and the exact
// range/auto-punch/stop behavior depends on the user's transport settings — not
// header-guaranteed. tick() detects completion via the play cursor reaching the
// range end (the pure state machine), independent of REAPER's auto-punch.
CSurf_OnRecord();
// Anchor the wall-clock safety ceiling from here (steady clock — independent of the
// play cursor, so a transport that starts but never advances is still bounded).
st->markElapsedStart();
return st;
}
// ============================================================================
// tick — advance the in-flight record; on terminal, finalize/abort + restore
// ============================================================================
RealtimeTickResult RealtimeRecordBackend::tick(RealtimeCaptureState& state) {
RealtimeTickResult out;
// If a prior terminal path already tore this down (e.g. abort() then a stray
// tick), do nothing — the state is spent.
if (state.restored()) { out.status = RealtimeTickStatus::Failed; return out; }
const RecordPhase prevPhase = state.phase_;
// Read the transport bound to the record's OWN project (a project switch cannot
// point these reads at the wrong transport). &4 = recording. Gather everything the
// pure machine needs (transport + wall-clock ceilings + file-flush readiness).
RecordTickInputs inputs;
inputs.transport.recording = (GetPlayStateEx(state.proj_) & 4) != 0;
inputs.transport.playPosition = GetPlayPositionEx(state.proj_);
inputs.elapsedSeconds = state.elapsedSeconds();
// Deferred-finalize flush check (review §2), only meaningful once stopped. The
// recorded file is READY when its size is a valid positive value AND unchanged
// from the previous tick — REAPER finished flushing/closing the take on the audio
// thread. Comparing across a tick avoids moving a file mid-write (truncated take).
if (prevPhase == RecordPhase::Finalizing) {
state.markFinalizingStartOnce();
inputs.finalizingSeconds = state.finalizingSeconds();
const std::int64_t sz = recordedFileSize(state.temp_);
inputs.fileReady = (sz > 0 && sz == state.lastFileSize_);
state.lastFileSize_ = sz;
}
// Wait for the transport to reach the RECORDED window end (extended past the
// range end for a tail mode), not the request's range end — the extra tail window
// is part of the record. The record safety ceiling scales with it (window - start
// + margin) inside the pure machine.
state.phase_ = advanceRecordPhase(state.phase_, inputs,
state.request_.startSeconds,
state.recordWindowEnd_);
// On the Recording -> Finalizing edge, stop OUR project's transport ONCE so REAPER
// begins closing/flushing the recorded take. Project-scoped (OnStopButtonEx(proj_))
// — never the global CSurf_OnStop, which would stop whatever project is ACTIVE (a
// foreign one during a project switch), not the record's own. The flush wait then
// proceeds across subsequent ticks before the file is moved.
if (prevPhase == RecordPhase::Recording &&
isStopRequested(state.phase_)) {
state.stopOwnTransport();
state.markFinalizingStartOnce(); // anchor the flush ceiling from the stop
}
if (!isTerminalPhase(state.phase_)) {
out.status = RealtimeTickStatus::InProgress;
return out; // keep the OnTimer tick fast — recording or flushing
}
// Terminal (Done: file flushed + stable; Failed: flush ceiling tripped). On Done,
// finalize moves the now-stable file into the bank + builds the Sample. On Failed
// (the flush timeout) there is nothing usable — report RenderFailed. Then restore
// ALL snapshotted state — the non-destructive gate, idempotent + unconditional.
CaptureResult res;
if (state.phase_ == RecordPhase::Done) {
res = finalizeRecording(state);
} else {
res.status = CaptureStatus::RenderFailed;
res.message = "Realtime record timed out waiting for the recorded file to "
"flush/close (nothing captured).";
}
state.markFinalized();
state.restore();
out.result = res;
out.status = (res.status == CaptureStatus::Ok)
? RealtimeTickStatus::Done
: RealtimeTickStatus::Failed;
return out;
}
// ============================================================================
// abort — force-terminate now (shutdown / project switch) + restore
// ============================================================================
RealtimeTickResult RealtimeRecordBackend::abort(RealtimeCaptureState& state) {
RealtimeTickResult out;
// Already torn down (idempotent): report Failed and leave it.
if (state.restored()) { out.status = RealtimeTickStatus::Failed; return out; }
// CRITICAL (review §1): if the captured project was CLOSED mid-record, proj_ /
// temp_ point at freed memory. The closed project already reclaimed its
// temp track, arms, and transport — so DROP the handle WITHOUT touching any REAPER
// state (no stop, no finalize, no DeleteTrack, no arm restore). Touching those
// freed pointers is the use-after-free bug this guard exists to prevent. This is
// the ONE terminal path that can run against a possibly-closed project (tick() only
// runs while proj_ is the active — hence still-open — project); guarding here covers
// both the project-switch and unload callers.
if (!state.captureProjectStillOpen()) {
state.dropWithoutRestore();
out.result.status = CaptureStatus::RenderFailed;
out.result.message = "Realtime capture dropped — the captured project was closed "
"mid-record (nothing to restore; no capture persisted).";
out.status = RealtimeTickStatus::Failed;
return out;
}
// The project is still open (a tab-switch, or a clean unload with the project
// present): stop the transport, then TRY to finalize whatever was captured so a
// near-complete record still keeps the audio; if nothing was recorded (or the file
// has not flushed yet), finalize returns RenderFailed and we abort clean.
// Project-scoped stop (OnStopButtonEx(proj_)) — on a project switch proj_ is no
// longer active, so the global CSurf_OnStop would stop the wrong (foreign) project.
//
// NOTE (residual timing — DAW-verify): abort is the force-terminate path (unload /
// switch); it cannot span ticks to wait for the flush the way tick() does, so its
// finalize still races REAPER's audio-thread take close. That is inherent to a
// best-effort terminal grab and is acceptable — the normal completion path (tick)
// is the one that must be flush-safe.
state.stopOwnTransport();
CaptureResult res = finalizeRecording(state);
state.markFinalized();
state.restore(); // the non-destructive gate — always runs
out.result = res;
out.status = (res.status == CaptureStatus::Ok)
? RealtimeTickStatus::Done
: RealtimeTickStatus::Failed;
return out;
}
} // namespace reasampler
src/card_drag.h
-147
View File
@@ -1,147 +0,0 @@
#pragma once
// card_drag — the REAPER-free decision logic behind the L7 in-grid reorder drag. Three
// pure concerns live here so they are unit-tested outside the DAW (CLAUDE.md §load-bearing
// split); the SWELL wiring, SetCursor call, cursor resources, and drop-target draw stay in
// the shell (bank_panel.cpp). Mirror of drag_out::decideGesture.
//
// 1. GESTURE PRECEDENCE (F3 settled). A live drag resolves to exactly one gesture, in a
// strict precedence the shell evaluates on every mouse-move / at drop:
// (1) pointer LEFT the client rect -> OsDragOut (hand off to the OS)
// (2) else drop over a tab / the OTHER bank -> Move | Copy (Ctrl = Copy)
// (3) else drop within the SAME bank's grid -> Reorder | Replace
// - empty slot -> Reorder (place there)
// - occupied slot, no modifier -> Reorder (insert-before-and-shift)
// - occupied slot, Alt held -> Replace (Alt-replace-over-occupied)
// So leave-client wins first, then other-bank, then same-bank-grid = reorder/replace.
// This keeps the reorder gesture from ever stealing a bank-move or OS-drag.
//
// 2. SLOT HIT-TEST. Which grid SLOT a pointer sits over, sparse-aware: the grid tiles
// slots 0..maxSlot including empty ones, so hit-testing maps a point to a slot index
// (empty or occupied) or -1 for a miss. The pixel<->slot rect math extends bank_grid's
// dense tiling to the gap-preserving slot layout.
//
// 3. DROP-RESULT -> CURSOR CUE. The resolved gesture maps to a cursor cue enum the shell
// turns into a SetCursor call. The cue DECISION is pure (here); the shell owns only
// the SetCursor call and the cursor resources. The Replace cue appears ONLY when Alt
// is actually held over an occupied slot (precedence rule 3's Alt branch).
//
// PURE MODULE: NO REAPER types, NO SWELL, NO LICE, NO OS, NO vendor/ includes. Standard
// library only. Reuses drag_out's PanelClientRect / DragState and bank_grid's CellRect.
#include <vector>
#include "bank_grid.h" // CellRect
#include "drag_out.h" // PanelClientRect, DragState
namespace reasampler {
// Which drop region the pointer currently sits over WITHIN the client rect. The shell
// classifies the live pointer against its own region geometry (tab strip / other bank
// region / this bank's own grid) and passes the verdict; card_drag does not know panel
// layout, only the precedence over these verdicts. (When the pointer has left the client
// rect the shell need not compute this — OsDragOut wins first regardless.)
enum class DropRegion {
SameBankGrid, // over the dragged samples' OWN bank grid — a reorder/replace target
OtherBankOrTab, // over a tab or the other region's bank — a move/copy target
DeadSpace, // inside the client but over no drop target (header, footer, gap)
};
// The resolved gesture — one clean outcome the shell acts on and maps to a cursor.
enum class CardGesture {
None, // no drag under way, or an empty payload — do nothing
OsDragOut, // pointer left the client rect — hand off to the native OS drag (drag_out)
Move, // drop over another bank/tab, no Ctrl — move the samples there
Copy, // drop over another bank/tab, Ctrl held — copy the samples there
Reorder, // drop within the same bank grid — reorder to the target slot
Replace, // drop within the same bank grid, Alt over an OCCUPIED slot — replace
};
// The live drag inputs the precedence decision needs beyond position + client rect:
// region — the shell's verdict on what the pointer sits over (see DropRegion).
// targetSlot — the slot the pointer sits over in the same-bank grid, or -1 (used only
// when region == SameBankGrid to decide empty-vs-occupied).
// slotOccupied — whether targetSlot currently holds a sample (drives Reorder vs Replace).
// ctrl — Ctrl held (Copy vs Move over another bank).
// alt — Alt held (Replace vs Reorder over an occupied same-bank slot).
struct DragModifiers {
DropRegion region = DropRegion::DeadSpace;
int targetSlot = -1;
bool slotOccupied = false;
bool ctrl = false;
bool alt = false;
};
// Resolves the gesture for a drag at pointer (px, py) over `client`, given the drag
// `state` and the live `mods`. Precedence exactly as documented above.
// * Not dragging / no armed samples: None.
// * Pointer OUTSIDE the client rect: OsDragOut (wins first — invariant #4 boundary).
// * OtherBankOrTab: Copy if ctrl else Move.
// * SameBankGrid: Replace iff (alt AND the target slot is occupied); else Reorder
// (whether the slot is empty — place — or occupied without Alt — insert-shift).
// * DeadSpace inside the client: None (a drop here is a no-op).
CardGesture decideCardGesture(int px, int py, const PanelClientRect& client,
const DragState& state, const DragModifiers& mods);
// The cursor cue the shell should show for a resolved gesture. 1:1 with CardGesture but
// named as a cursor concern so the shell maps it to a SetCursor resource. None -> the
// default arrow. The Replace cue is produced ONLY for CardGesture::Replace (which itself
// requires Alt-over-occupied), satisfying "the replace cursor appears only while Alt is
// held over an occupied slot."
enum class CursorCue {
Default, // arrow — no drag, or dead space
Reorder, // within-bank reorder
Move, // move to another bank/tab
Copy, // copy to another bank/tab
OsDragOut, // pointer left the client (the OS drag loop owns the cursor once handed off)
Replace, // Alt-replace over an occupied slot
};
// Maps a resolved gesture to its cursor cue (pure — the shell owns SetCursor only).
CursorCue cursorForGesture(CardGesture g);
// --- Sparse-aware slot layout + hit-test --------------------------------------
// The pixel rect of one grid SLOT (empty or occupied). Distinct from bank_grid's CellRect
// only in intent — a SlotCellRect carries the slot index it draws, so the shell can map a
// drawn/hit rect back to the model slot without a parallel array. width/height match the
// grid spec; (x, y) is the top-left in the region's grid-viewport coordinates (the shell
// translates by the grid origin exactly as regionCellRects does today).
struct SlotCellRect {
int slot = 0; // the model slot this rect represents (0..maxSlot)
int x = 0;
int y = 0;
int width = 0;
int height = 0;
bool operator==(const SlotCellRect& o) const {
return slot == o.slot && x == o.x && y == o.y &&
width == o.width && height == o.height;
}
};
// Tiles slots 0..maxSlot (INCLUSIVE) into a panel of the given pixel width, honoring the
// grid spec — the sparse-aware sibling of bank_grid::computeCellRects. Every slot in
// [0, maxSlot] gets a rect (empty slots included) so a gap draws as an empty cell and a
// drop targets it precisely. `maxSlot` < 0 -> empty (no occupied slots). The rects use the
// SAME column/row math as computeCellRects (slot index in place of item index), so an
// all-dense map (slots 0..N-1) lays out identically to today's grid.
std::vector<SlotCellRect> computeSlotRects(int maxSlot, int panelWidth,
const GridSpec& spec);
// Like computeSlotRects but extends one full trailing row of slots beyond maxSlot so a
// drop pointer past the last occupied card still resolves to a valid target slot. The
// trailing slots (maxSlot+1 .. maxSlot+cols) are empty — a drop on any of them calls
// reorderSample with that slot index, which places the card there directly (no shift,
// because the slot is empty). Used ONLY for drop hit-testing; the draw path uses
// computeSlotRects (no trailing ghost row in the visual).
// When maxSlot < 0 the trailing row starts at slot 0 (same as a fresh bank with no cards).
std::vector<SlotCellRect> computeSlotRectsForDrop(int maxSlot, int panelWidth,
const GridSpec& spec);
// Hit-tests a point against slot rects (half-open bounds, matching hitTestCell). Returns
// the SLOT index (rect.slot) of the first rect containing the point, or -1 on a miss (gap,
// margin, below the last row). NOTE the return is the slot index, NOT the vector index —
// callers reason in model slots.
int hitTestSlot(int px, int py, const std::vector<SlotCellRect>& rects);
} // namespace reasampler
src/card_meta.cpp
-64
View File
@@ -1,64 +0,0 @@
// card_meta — pure implementation. See card_meta.h. NO REAPER / SWELL / LICE / vendor.
#include "card_meta.h"
#include <cmath>
#include <cstdio>
namespace reasampler {
std::string formatBarsBeats(const MusicalLength& m) {
// No derivable musical read-out without a positive tempo AND a stamped meter.
if (m.tempoBpm <= 0.0 || m.timeSigNum <= 0 || m.timeSigDenom <= 0) return {};
const double len = m.lengthSeconds > 0.0 ? m.lengthSeconds : 0.0;
// Total beats in THIS meter. A quarter-note is 60/tempo s; a beat is (4/denom)
// quarter-notes, so a beat lasts (60/tempo) * (4/denom) seconds. beats = len / that.
const double secondsPerBeat = (60.0 / m.tempoBpm) * (4.0 / m.timeSigDenom);
double totalBeats = len / secondsPerBeat;
// Snap to an exact beat when we are within a hundredth-of-a-beat epsilon of one, so a
// bar-aligned capture reads "2.1.00" rather than "1.4.99" from FP error just under the
// boundary. The epsilon is well below the .01 display quantum, so it never mis-rounds a
// genuinely fractional length.
const double snapped = std::floor(totalBeats + 0.5);
if (std::fabs(totalBeats - snapped) < 1e-6) totalBeats = snapped;
// Split into whole beats + a fractional remainder (0..1 of a beat).
double wholeBeats = std::floor(totalBeats);
double frac = totalBeats - wholeBeats;
// Bars/beats are 1-based; beat cycles 1..timeSigNum within a bar.
const long wb = static_cast<long>(wholeBeats);
const long bar = wb / m.timeSigNum + 1; // 1-based bar
const long beat = wb % m.timeSigNum + 1; // 1-based beat within the bar
// Subdivision: hundredths of a beat, floored (0..99). A decorative display quantum.
int sub = static_cast<int>(std::floor(frac * 100.0));
if (sub < 0) sub = 0;
if (sub > 99) sub = 99;
char buf[48];
std::snprintf(buf, sizeof(buf), "%ld.%ld.%02d", bar, beat, sub);
return buf;
}
std::string formatSecondsMs(double lengthSeconds) {
double len = lengthSeconds > 0.0 ? lengthSeconds : 0.0;
long secs = static_cast<long>(std::floor(len));
// Round to the nearest millisecond (not floor): FP error means 62.037 s stores as
// 62.0369999... and a raw floor would render "62.036". +0.5 before truncation rounds
// to the closest ms, which is what a wall-clock read-out should show.
int ms = static_cast<int>((len - static_cast<double>(secs)) * 1000.0 + 0.5);
// Rounding can push ms to 1000 at a whole-second boundary; carry into seconds.
if (ms >= 1000) { ms -= 1000; ++secs; }
if (ms < 0) ms = 0;
char buf[48];
std::snprintf(buf, sizeof(buf), "%ld.%03d", secs, ms);
return buf;
}
} // namespace reasampler
src/card_meta.h
-55
View File
@@ -1,55 +0,0 @@
#pragma once
// card_meta — pure formatting for the L7 decorative card metadata overlay. Each bank
// card overlays capture length as bars.beats.subdivisions (bottom-LEFT, musical) and
// seconds.milliseconds (bottom-RIGHT, wall-clock). Both read-outs are DECORATIVE and
// non-interactive; the bank_panel draws them via the L1 kit. The formatting itself is
// pure string work over the sample's stamped tempo + meter + length, so it is
// unit-tested outside the DAW (CLAUDE.md §load-bearing split).
//
// PURE MODULE: NO REAPER types, NO SWELL, NO LICE, NO vendor/ includes. Standard
// library only. Mirror of tooltip's prefix-strip helper.
#include <string>
namespace reasampler {
// The musical length inputs, taken straight off a Sample (L7 F1 capture-time stamp):
// lengthSeconds — captured length in wall-clock seconds (>= 0).
// tempoBpm — project tempo (BPM) at capture (Sample.captureTempo); 0 = unknown.
// timeSigNum — meter numerator at capture (Sample.captureTimeSigNum); 0 = unstamped.
// timeSigDenom — meter denominator at capture (Sample.captureTimeSigDenom); 0 = unstamped.
struct MusicalLength {
double lengthSeconds = 0.0;
double tempoBpm = 0.0;
int timeSigNum = 0;
int timeSigDenom = 0;
};
// bars.beats.subdivisions from a capture-time tempo + meter stamp (musical read-out).
//
// Derivation: one quarter-note lasts 60 / tempo seconds; a beat in this meter lasts
// (4 / timeSigDenom) quarter-notes; a bar holds timeSigNum beats. From lengthSeconds we
// get total beats, split into whole bars (÷ timeSigNum) + whole leftover beats + a
// subdivision remainder scaled to 1..N of the next beat. The output is 1-BASED and
// zero-padded to two subdivision digits: "1.1.00" is exactly one bar-start (a
// zero-length or bar-aligned capture), "2.3.50" is 1 bar + 2 beats + half a beat.
//
// Contract / edge cases (all tested):
// * UNSTAMPED meter (timeSigNum <= 0 || timeSigDenom <= 0) OR unknown tempo
// (tempoBpm <= 0): returns "" — no musical read-out is derivable (the caller keeps
// the s.ms read-out). This is the pre-L7-sample fallback (blank musical read-out).
// * zero length: "1.1.00" (bar 1, beat 1, no subdivision) — the musical origin.
// * exact bar boundary: the beat rolls to 1 and the bar increments (never "1.5.00"
// in 4/4 — that reads as "2.1.00").
// * long captures: bars grow without cap ("129.1.00" is fine).
// The subdivision is 0..99 (hundredths of a beat), floored — a display quantum, not a
// tick-accurate PPQ (the model refuses to invent PPQ; this is a decorative read-out).
std::string formatBarsBeats(const MusicalLength& m);
// seconds.milliseconds from a wall-clock length (always derivable, meter-independent).
// * "S.mmm" — integer seconds, a dot, zero-padded 3-digit milliseconds (rounded to nearest ms).
// e.g. 0.0 -> "0.000", 1.5 -> "1.500", 62.037 -> "62.037".
// * negative length is clamped to "0.000" (a length is never negative; defensive).
std::string formatSecondsMs(double lengthSeconds);
} // namespace reasampler
src/component_geometry.h
-139
View File
@@ -1,139 +0,0 @@
#pragma once
// component_geometry — the REAPER-free, LICE-free geometry + hit-test math for the shared
// drawing kit's generic components (Phase L, L1): a button box, a slider's track/handle,
// and a list row. These are the kit-level primitives that DON'T already have a pure owner:
// bank_grid / mode_switch / tab_strip / prune_button stay the source of truth for the
// surfaces THEY own; this module carries only the new, reusable component
// shapes the kit's drawButton / drawSlider / drawListRow draw against.
//
// Why pure (CLAUDE.md §load-bearing split, DS-1 caution): even where the draw shell reuses
// a WDL/vwnd drawing idiom, the hit-test geometry stays HERE, unit-tested outside the DAW —
// vwnd's retained-mode controls own their hit-test internally, which this deliberately does
// NOT import. The shell asks this module where a handle is and whether a point hit a row.
//
// NAME NOTE (brief §name-collision): the surrounding modules already own ButtonRect /
// SegmentRect / CellRect / FooterRect etc. in this namespace, so this module's types are
// named KitButtonBox / SliderGeometry / ListRowBox to avoid collision — checked with grep
// before minting. They are distinct concepts (kit-generic component boxes vs. a specific
// surface's hit rects), so the separate names are correct, not merely non-colliding.
//
// PURE MODULE: NO REAPER types, NO SWELL, NO LICE, NO vendor/ includes. Standard library
// only. Builds and unit-tests without REAPER. Mirror of mode_switch / prune_button.
namespace reasampler {
// A generic pixel box, top-left origin (SWELL/LICE convention). Shared shape for the kit
// component rects below. A zero-area box (empty()) means "nothing to draw / hit" — the
// same graceful-suppression convention prune_button uses.
struct KitBox {
int x = 0;
int y = 0;
int width = 0;
int height = 0;
bool empty() const { return width <= 0 || height <= 0; }
bool operator==(const KitBox& o) const {
return x == o.x && y == o.y && width == o.width && height == o.height;
}
};
// True iff (px, py) falls inside `box`, half-open bounds [x, x+width) x [y, y+height) —
// the same discipline as every sibling hit-test so draw and hit-test never double-claim a
// pixel. An empty box claims no point (always false).
bool hitTestBox(int px, int py, const KitBox& box);
// --- Button ------------------------------------------------------------------
//
// A button drawn inside a host cell, inset by a uniform padding so it reads as a raised
// control rather than a full-bleed fill (the kit's drawButton draws the micro-gradient
// surface inside this box). Distinct from prune_button, which owns its OWN placement
// within its strip — this is the generic "given a cell, where's the
// button" helper for new kit consumers.
struct KitButtonBox {
KitBox box;
bool operator==(const KitButtonBox& o) const { return box == o.box; }
};
// The button box inside `cell`, inset uniformly by `padding` on all four sides. Returns an
// empty box (suppressed) when the cell is degenerate or the padding would collapse it to
// zero-or-negative area — the caller then draws nothing (graceful, mirrors prune_button).
// padding < 0 is treated as 0.
KitButtonBox computeButtonBox(const KitBox& cell, int padding);
// --- Slider (horizontal) -----------------------------------------------------
//
// A horizontal slider: a track spanning the control width (inset at both ends by the
// handle's half-width so the handle never clips past the track), and a square handle
// centered on the track and positioned by the normalized value. drawSlider draws the
// track, the filled portion up to the handle, and the handle. Hit-test is against the
// handle (grab) and the track (jump); both are pure here.
struct SliderGeometry {
KitBox track; // the full track rect (the groove)
KitBox filled; // the filled portion from the track's left up to the handle center
KitBox handle; // the draggable handle rect
bool operator==(const SliderGeometry& o) const {
return track == o.track && filled == o.filled && handle == o.handle;
}
};
// Lays out a horizontal slider inside `control` for a normalized `value` in [0, 1] with a
// square handle of side `handleSize`. The track is vertically centered at a fixed
// `trackThickness`, inset horizontally by handleSize/2 at each end so the handle's travel
// stays within `control`. value is clamped to [0, 1]; a value of 0 puts the handle flush
// left, 1 flush right. Returns all-empty boxes when the control is degenerate or too
// small to host the handle (control width < handleSize or height < handleSize) — the
// caller draws nothing. handleSize <= 0 or trackThickness <= 0 also yields empty.
SliderGeometry computeSlider(const KitBox& control, double value,
int handleSize, int trackThickness);
// The normalized value [0, 1] a click at px maps to, for a slider laid out in `control`
// with `handleSize` (the inverse of computeSlider's handle placement — a track jump).
// px left of / at the track start yields 0.0, at/right of the track end yields 1.0,
// linear in between. Returns 0.0 for a degenerate/too-small control (no travel). py is
// unused (a horizontal slider maps X only); the caller gates the whole slider region
// with hitTestBox(control) before calling this.
double sliderValueAt(int px, const KitBox& control, int handleSize);
// --- List row ----------------------------------------------------------------
//
// A single selectable row in a vertical list: full-width, fixed height, stacked from the
// list's top by index (no scroll — the caller offsets the list origin for scroll). The
// kit's drawListRow draws the row surface (rest/hover/selected/focus) and an optional
// leading thumbnail; the panel's waveform cell is a specialization drawn the same way.
struct ListRowBox {
int index = 0; // the row's index in the caller's list (0-based, top-first)
KitBox box;
bool operator==(const ListRowBox& o) const {
return index == o.index && box == o.box;
}
};
// The row box for `index` in a list laid out inside `list` at `rowHeight` per row. Rows
// stack from list.y; row i spans [list.y + i*rowHeight, +rowHeight). Returns an empty box
// when the list is degenerate, rowHeight <= 0, index < 0, or the row would fall entirely
// below the list's bottom (fully clipped) — a partially-visible last row IS returned (the
// caller clips the draw). This is layout only; the caller decides how many rows exist.
ListRowBox computeListRow(const KitBox& list, int index, int rowHeight);
// The index of the row a point (px, py) lands on, for a list laid out inside `list` at
// `rowHeight`. Returns -1 for a miss: outside the list bounds, in the list band but below
// the last row of `rowCount` rows (the empty tail), or a degenerate list/rowHeight/count.
// rowCount bounds the hit so a click in blank space past the last row is a clean miss, not
// a phantom row. Half-open bounds match computeListRow so the hit maps to the drawn row.
int hitTestListRow(int px, int py, const KitBox& list, int rowHeight, int rowCount);
// --- Waveform column count ---------------------------------------------------
//
// The number of pixel columns drawWaveform renders inside `box` (its fixed 2px side
// insets), never negative. Callers pass this count directly as the `binCount` argument to
// peaks::computeEnvelope — one bin per column is the correct resolution, and
// peaks::columnMinMax's exact partition makes the render gap-free at any bins-to-pixels
// ratio. Overbinning does NOT improve render quality (columnMinMax's frame union is
// identical whether bins == columns or bins == k*columns) and wastes memory and CPU.
int waveformColumnCount(const KitBox& box);
} // namespace reasampler
src/core/CMakeLists.txt
+19
View File
@@ -0,0 +1,19 @@
# The pure substrate — see root CLAUDE.md's architecture section for the core/ purity invariant.
#
# Declaration order below runs base-first so the file reads as a dependency ladder; CMake
# itself does not require it (link names resolve at generate time), and a few edges do run
# backwards — core/wire's instrument_drop reuses the instrument's own state codec.
add_subdirectory(json)
add_subdirectory(util)
add_subdirectory(wire)
add_subdirectory(audio)
add_subdirectory(model)
add_subdirectory(capture)
add_subdirectory(tracking)
add_subdirectory(reclaim)
add_subdirectory(version)
add_subdirectory(package)
add_subdirectory(view)
add_subdirectory(ui)
add_subdirectory(instrument)
src/core/audio/CLAUDE.md
+13
View File
@@ -0,0 +1,13 @@
# src/core/audio — pure audio-data math
## Scope
Pure, REAPER-free audio-data math with no dependence on REAPER's own peak-cache
API. Currently one module: waveform min/max bin computation from raw PCM. Does
**not** include: LICE waveform drawing (`draw_kit`, `shell/panel`), the editor's
waveform/marker geometry (`waveform_view`, `core/instrument/ui`), or PCM
decoding itself.
## Modules
- `peaks` — waveform min/max bin computation from raw PCM; does not depend on REAPER's peak API.
src/core/audio/CMakeLists.txt
+2
View File
@@ -0,0 +1,2 @@
reasampler_pure_library(peaks SOURCES peaks.cpp)
reasampler_test(peaks LINK peaks)
src/peaks.cpp → src/core/audio/peaks.cpp
+16 -31
View File
@@ -1,20 +1,17 @@
#include "peaks.h"
#include "core/audio/peaks.h"
#include <algorithm>
#include <climits>
#include <cmath>
#include <cstdint>
// peaks implementation.
// peaks — pure implementation. See peaks.h.
//
// One linear pass per channel. The frame->bin partition is computed with integer
// arithmetic so it is exact for any frameCount / binCount pairing: bin b owns the
// half-open frame span [b*frameCount/binCount, (b+1)*frameCount/binCount). That
// span formula distributes the remainder deterministically (earlier bins get the
// extra frames) with no rounding drift and no dropped tail — the last bin's end is
// always exactly frameCount.
// One linear pass per channel. Frame->bin partition uses integer arithmetic so it's exact for
// any frameCount/binCount pairing: bin b owns [b*frameCount/binCount, (b+1)*frameCount/binCount)
// — earlier bins absorb the remainder, no rounding drift, no dropped tail.
namespace reasampler {
namespace reasampler::audio {
Envelope computeEnvelope(const std::vector<AudioSample>& interleaved,
std::size_t channelCount,
@@ -22,11 +19,10 @@ Envelope computeEnvelope(const std::vector<AudioSample>& interleaved,
std::size_t binCount) {
Envelope envelope(channelCount);
if (channelCount == 0) {
return envelope; // no channels -> no envelopes
return envelope;
}
// Never read past what the buffer actually holds, even if the caller's
// frameCount overstates the buffer (defensive: no OOB on a short buffer).
// Never read past what the buffer actually holds, even if frameCount overstates it.
const std::size_t availableFrames = interleaved.size() / channelCount;
const std::size_t frames = std::min(frameCount, availableFrames);
@@ -35,14 +31,10 @@ Envelope computeEnvelope(const std::vector<AudioSample>& interleaved,
bins.assign(binCount, MinMax{}); // empty/degenerate bins default to {0,0}
for (std::size_t b = 0; b < binCount; ++b) {
// Half-open frame span for this bin: [b*frames/binCount, (b+1)*frames/binCount).
// Guard against size_t overflow in b*frames and (b+1)*frames: binCount is
// caller-controlled and unbounded, so when b >= SIZE_MAX/frames either
// multiplication could wrap. Any such bin is unreachable in practice
// (allocating that many MinMax entries would OOM first), but we guard
// explicitly to eliminate UB.
// Guard b*frames / (b+1)*frames overflow: binCount is caller-controlled and
// unbounded. Unreachable in practice (would OOM first) but guarded to avoid UB.
if (frames > 0 && b >= SIZE_MAX / frames) {
continue; // b*frames or (b+1)*frames would overflow; span is empty
continue;
}
const std::size_t begin = (b * frames) / binCount;
const std::size_t end = ((b + 1) * frames) / binCount;
@@ -69,21 +61,17 @@ MinMax columnMinMax(const ChannelEnvelope& bins, int columnCount, int col) {
const int nbins = static_cast<int>(bins.size());
if (columnCount <= 0 || nbins == 0) return MinMax{};
// Clamp col to [0, columnCount-1].
if (col < 0) col = 0;
if (col >= columnCount) col = columnCount - 1;
// Half-open bin range for this column, mirroring computeEnvelope's exact partition.
// 64-bit products: col*nbins can exceed int range for a large oversampled envelope
// (same overflow discipline as computeEnvelope's frame-span arithmetic above).
// Half-open bin range for this column, mirroring computeEnvelope's partition. 64-bit
// products: col*nbins can exceed int range for a large oversampled envelope.
const std::int64_t begin64 = (static_cast<std::int64_t>(col) * nbins) / columnCount;
const std::int64_t end64 =
(static_cast<std::int64_t>(col) + 1) * nbins / columnCount;
// col <= columnCount-1 guarantees begin64 <= (columnCount-1)*nbins/columnCount < nbins.
const int colBinBegin = static_cast<int>(begin64);
// When the column spans no full bin (more columns than bins), use the enclosing bin
// so no column is left empty.
// When the column spans no full bin (more columns than bins), use the enclosing bin.
const int scanEnd = (end64 > begin64) ? static_cast<int>(end64) : colBinBegin + 1;
const int clampedEnd = (scanEnd <= nbins) ? scanEnd : nbins;
@@ -102,14 +90,11 @@ std::size_t lastFrameAboveThreshold(const std::vector<AudioSample>& interleaved,
AudioSample linearThreshold) {
if (channelCount == 0) return kNoFrameAboveThreshold;
// Clamp to what the buffer actually holds — a caller frameCount that overstates
// the buffer must never read past the end (mirror of computeEnvelope's guard).
const std::size_t availableFrames = interleaved.size() / channelCount;
const std::size_t frames = std::min(frameCount, availableFrames);
if (frames == 0) return kNoFrameAboveThreshold;
// Scan backward: the first frame (from the end) whose loudest channel exceeds the
// threshold is the last audible frame. `f` runs frames..1 so `f-1` never wraps.
// Scan backward; `f` runs frames..1 so `f-1` never wraps.
for (std::size_t f = frames; f > 0; --f) {
const std::size_t frame = f - 1;
const std::size_t base = frame * channelCount;
@@ -123,4 +108,4 @@ std::size_t lastFrameAboveThreshold(const std::vector<AudioSample>& interleaved,
return kNoFrameAboveThreshold;
}
} // namespace reasampler
} // namespace reasampler::audio
src/core/audio/peaks.h
+88
View File
@@ -0,0 +1,88 @@
#pragma once
// peaks — waveform min/max envelope (thumbnail) computation from raw interleaved PCM. We compute
// our own thumbnails rather than depending on REAPER's peak API: we own the file format, so this
// is simpler, testable, and dependency-free.
#include <cstddef>
#include <vector>
namespace reasampler::audio {
// REAPER's native audio buffer format (interleaved 32-bit float), consumed directly with no
// lossy conversion. Named AudioSample rather than Sample to avoid colliding with bank_model's
// metadata struct of the same short name.
using AudioSample = float;
// One bin's extremes across the samples that fell in it. min <= max always; an empty bin
// (more bins than frames) is {0, 0}.
struct MinMax {
AudioSample min = 0.0f;
AudioSample max = 0.0f;
bool operator==(const MinMax& o) const { return min == o.min && max == o.max; }
};
// One channel's envelope: exactly `binCount` bins, in time order.
using ChannelEnvelope = std::vector<MinMax>;
// Per-channel envelopes: outer index is channel (channelCount entries, order preserved — never
// mixed or folded), inner is that channel's bins.
using Envelope = std::vector<ChannelEnvelope>;
// Computes a per-channel min/max envelope from interleaved PCM.
//
// interleaved frame-interleaved samples: [f0c0, f0c1, ..., f1c0, f1c1, ...]. Size must be
// >= frameCount * channelCount; extra is ignored.
// channelCount channels per frame (the stride). Each channel is enveloped INDEPENDENTLY — no
// averaging, no stereo fold (channel count is preserved end to end).
// frameCount frames (samples-per-channel) to consider.
// binCount requested bins per channel. Honored exactly for any frameCount.
//
// Frame->bin partition: frames split into `binCount` contiguous spans as evenly as possible;
// when frameCount doesn't divide evenly, the remainder spreads one-frame-per-bin across the
// earliest bins, so the tail is never dropped and no bin reads out of bounds.
//
// Degenerate input (no UB, no throw): binCount == 0 -> empty bin vector per channel;
// channelCount == 0 -> empty envelope; frameCount == 0 -> binCount bins, all {0, 0}.
Envelope computeEnvelope(const std::vector<AudioSample>& interleaved,
std::size_t channelCount,
std::size_t frameCount,
std::size_t binCount);
// Merged min/max for display column `col` (0-based, of `columnCount` total) of a pre-computed
// ChannelEnvelope — the true extremes of every bin projecting to that column. This is the
// display-side collapse when the envelope was computed at a higher resolution than the drawn
// width, so a steep transient split across adjacent bins (e.g. {0.9,1.0} then {-1.0,-0.9})
// renders as one gap-free span instead of two separated dots.
//
// Bin->column mapping mirrors computeEnvelope's half-open partition: column col owns bins
// [col*nbins/columnCount, (col+1)*nbins/columnCount). When that range is empty (more columns
// than bins), the enclosing bin fills the column instead. columnCount <= 0 or bins.empty()
// returns {0, 0}; col is clamped to [0, columnCount-1].
MinMax columnMinMax(const ChannelEnvelope& bins, int columnCount, int col);
// Sentinel for "no frame in the scanned range peaked above threshold". SIZE_MAX is unambiguous
// since no real frame index can reach it.
inline constexpr std::size_t kNoFrameAboveThreshold =
static_cast<std::size_t>(-1);
// Scans interleaved PCM BACKWARD for the last frame whose per-frame peak (max |sample| across
// all channels of that frame — no stereo fold) exceeds `linearThreshold`. Returns
// kNoFrameAboveThreshold if no frame exceeds it (or on degenerate input).
//
// This is the boundary primitive behind the realtime tail's decay-scan trim (see
// docs/product/capture-tail.md): the recorded tail is scanned back from the end for the last
// frame still above -72 dB, and the file truncated one frame past it. Deliberately separate from
// computeEnvelope — that answers "the min/max envelope over bins" (a thumbnail), this answers
// "the last frame above a level" (a boundary); bending a bin-oriented envelope to a frame-exact
// question is a worse fit.
//
// linearThreshold a LINEAR amplitude ratio (e.g. the -72 dB ratio from
// render_settings::autoTrimEndRatio), NOT dB. A frame counts as above when
// its peak is STRICTLY greater than this.
std::size_t lastFrameAboveThreshold(const std::vector<AudioSample>& interleaved,
std::size_t channelCount,
std::size_t frameCount,
AudioSample linearThreshold);
} // namespace reasampler::audio
src/core/capture/CLAUDE.md
+109
View File
@@ -0,0 +1,109 @@
# src/core/capture — pure logic behind the capture pillar
## Scope
Pure, REAPER-free logic behind the capture pillar: path arithmetic, the RIFF/WAV
codec, render-settings/FX-scope/tail-mode mapping, `InsertMedia` mode-bit
computation, the realtime-record state machine, and batch-capture planning.
Does **not** include: the REAPER-bound capture backends themselves
(`shell/capture`), the docked panel's tail-toggle window/click-handling
(`shell/panel`), or the `InsertMedia` call/undo-block mechanics
(`shell/capture`'s `insert.cpp`).
## Invariants
The repo-wide precision invariants (null test, bit-identical repeats,
non-destructive, exact bounds, relative-paths-only, capture FX scope) are
authoritative in root `CLAUDE.md` — reference them, don't re-copy them.
Detail specific to these pure modules:
- **No silent time-stretch, made checkable.** `insert_plan` never sets the &4
("stretch/loop to fit time sel") bit; `kStretchToTimeSelBit` is exposed
precisely so a test can assert it is never present in any computed
`InsertMedia` mode.
- **Tail is a three-state mode (`docs/product/capture-tail.md`), not a
per-action variant:** None (exact bounds, byte-identical, the only mode for
null-test/verify captures), Auto (generous 8 s tail then trim trailing
silence to -72 dB surgical normalize), Manual (fixed length, clamped to the 8
s cap, no trim). `render_settings` owns the offline RENDER_* mapping;
`tail_control` owns the panel-facing toggle/cycle/clamp/label logic sharing
the same `TailMode` enum and the same 8 s / -72 dB constants (single source
of truth — do not hardcode a second copy in either module).
- **Capture FX scope is enforced via FX-bypass + gain-neutralize, not a render
bit.** `render_settings::fxBypassPlanFor` selects which tracks (self /
ancestors / master) get their FX bypassed for a given `CaptureScope`; there
is no master capture scope (to capture the master, render a track instead).
- **Relative paths only, by construction.** `capture_paths::BankPaths`
separates the absolute render directory REAPER needs from the
project-relative path the `BankIndex` stores; `bankRelativeForName` spells an
enumerated folder entry the identical way `deriveBankPaths` spelled it at
capture time, so the prune core's exact-string match cannot drift.
- **Project-identity transition is GUID-primary.** `capture_paths`'s
`classifyProjectTransition` checks the minted GUID before the live
`ReaProject*` object, specifically because REAPER can recycle a closed
project's pointer address onto an unrelated project.
## Modules
- `wav_codec` — chunk walker + layout parse + float32 build + size-field patch + the lossless mono collapse + content hashes; the single pure RIFF/WAV owner (`wav_trim` is retired; `wav_codec` is the sole owner).
- `capture_realtime` (`core/capture`, **renamed from `realtime_record` in Q-W3** — the Q-9 naming rider: pure module takes the stem, the shell takes the suffix, matching `drag_out`/`drag_out_win`) — the M8 realtime-record pure logic: capture scope + FX-tap point → `I_RECMODE`/`I_RECMODE_FLAGS` values, wet/dry → tap point, the recorded-file → `Sample` mapping, and the async record-phase state machine. Depends on `bank_model` for the plain `Sample`/`SourceMode` types. The transport/temp-track/send recipe lives in the shell (`shell/capture/capture_realtime_shell.cpp` + `capture_realtime_finalize.cpp`).
- `batch_capture` — pure batch-capture planner: maps source ranges to capture units and aggregates results.
- `capture_paths` — the REAPER-free path arithmetic behind offline capture: bank-subfolder + unique-filename derivation (`deriveBankPaths`, forward-slash form, no filesystem touch), the absolute-render-dir vs. project-relative-index-path split (`BankPaths`), the persist-side inverse (`resolveBankFile`, `projectDirOfRpp`), the Save-As bank-relocation plan (`deriveRelocationPlan`), and the GUID-primary project-identity classifier (`classifyProjectTransition` → `NoOp`/`Load`/`SaveAsRelocate`) the persist-poll timer drives.
- `capture_name` — the REAPER-free composition of one capture's label + file-stem base from its source-track name(s), a local-calendar discriminator (`MM-DD HHMM`, from the shell's clock read), and an optional batch ordinal. The label and the stem deliberately diverge: the stem still passes through `capture_paths::sanitizeStem` (so a name that sanitizes to nothing files as `capture`), while the label keeps the source name verbatim. Stem uniqueness stays entirely `makeUniqueTag`'s — this module never disambiguates.
- `insert_plan` — the REAPER-free logic behind the `insert` shell (M6): computes the `InsertMedia` `mode` bitmask from an `InsertOptions` struct (placement target, tempo-conform ratio, preserve-pitch flag), guaranteeing the &4 stretch-to-time-selection bit is never set and that no tempo bits are set when `conform == None`.
- `render_settings` — the REAPER-free logic behind the capture action family: `SourceMode` → `RENDER_SETTINGS` bit mapping, `P_RAZOREDITS` string parsing + range-union bounds, razor-else-time range inference, the FX-scope bypass plan (`fxBypassPlanFor`), the one bounds mode a capture hands its window over on (`kRenderBoundsTimeSelection`) and the tail bit paired with it (`kTailFlagTimeSelection`), the tail-mode → `RENDER_TAILFLAG`/`RENDER_NORMALIZE`/`RENDER_TRIMEND` mapping (`tailRenderSettingsFor`) and its realtime-window analog (`realtimeRecordWindowEnd`), the capture-action taxonomy table (`captureActionTable`) `main.cpp` iterates to register the CAPTURE_ITEM/CAPTURE_TRACK family, and `renderSourceLabel` (the source named in the offline backend's bounds refusal).
- `render_window` — the REAPER-free frame arithmetic behind exact capture bounds: `frameCountFor` (the frame count a project-time window occupies at the project rate — the number the offline backend checks the rendered file against before landing it, so a render that printed something other than the window is refused rather than banked), `renderHonoredBounds` (the gate's verdict and the sole home of its one-frame tolerance, which is empirical rather than proven — the header states which renderer models it covers and which it does not), and `itemExtentPrintsWindow`, the predicate `render_settings::sourceModeForScope` consults to decide whether REAPER's selected-items render source can express a requested window at all. It also owns the one short-render diagnostic: `msFlooredEndFrameCount` (the frames a window holds with its end floored to the millisecond — the shape two live short renders matched on the retired custom-bounds mode, quoted by a refusal as a count coincidence and nothing more) and `isOnMillisecondGrid`, the whole-millisecond tolerance that count depends on.
- `track_topology` — the REAPER-free folder arithmetic over a project's flat `I_FOLDERDEPTH` delta list: `directChildIndices` names a folder parent's DIRECT children, the set `shell/capture/render_isolation` silences so a ranged item capture does not print its track's children. Grandchildren are excluded by construction — they reach the parent only through the child that owns them.
- `tail_control` — the REAPER-free logic behind the docked `bank_panel`'s tail-mode toggle: the cycle order (None → Auto → Manual → None), the Manual-length clamp/scroll-wheel fine-adjust (`clampManualMs`/`adjustManualMs`, 250 ms/notch, 2000 ms default), the toggle's label text (e.g. "Tail: Manual 2.0s"), and the `TailSetting` JSON round-trip persist stores per-project.
## Gotchas
- `render_settings`'s `RENDER_SETTINGS`/`RENDER_NORMALIZE`/`RENDER_TAILFLAG`/
`RENDER_TRIMEND` bit values are transcribed verbatim from the SDK header
(`reaper_plugin_functions.h` lines ~3041/~3047/~3051/~3062) — re-verify
against the header before changing any bit value, per the root `CLAUDE.md`
API-verification rule.
- **The selected-items render source (`&32`) cannot narrow a window** — REAPER
derives that render's bounds from the selected items' own extents, so
`RENDER_BOUNDSFLAG=0` + `RENDER_STARTPOS`/`RENDER_ENDPOS` do not constrain it.
This is an inference from the observed defect (a time selection inside a long
item captured the whole item), NOT a header-confirmed fact. It is why
`sourceModeForScope` routes item scope to `&32` only when the item extent
already IS the requested window — do not re-point item scope unconditionally at
`&32`, and do not widen the `&32` branch to windows it cannot express. This is the
one home for that inference; the sites that act on it point here rather than
restating it.
- **The re-source changes the CONTENT, not the FX scope.** `fxBypassPlanFor` is keyed
on `CaptureScope`, so a ranged item capture still hears take/item FX only — but the
selected-tracks source prints everything upstream of the track. The shell answers
that with a transient silencing (`shell/capture/render_isolation`) whose child-set
walk lives here in `track_topology`; the item-vs-track asymmetry behind it is in
`src/shell/capture/CLAUDE.md`.
- **The custom-time-bounds field floors the render window to the millisecond; the
time selection does not.** Both observations and why only one bounds mode is
reachable: `render_settings.h`'s `kRenderBoundsTimeSelection` — the one narrative
home; this bullet is a pointer, not a retelling. Do not reintroduce
`RENDER_BOUNDSFLAG=0`.
- `kRenderPreFaderStems` (&8192) is deliberately **not** used — REAPER offline
render has no true pre-FX "dry" bit; FX scoping is done entirely by the
FX-bypass-around-render mechanism, never by a render bit.
- **The mono collapse changes a capture's content identity, by design.**
`hashWavContent` covers the `fmt ` body plus the `data` payload, and the collapse
rewrites both — so a collapsed capture does NOT hash-dedup against a stereo twin of
the same audio already in the bank. Accepted: the predicate is deterministic over
deterministic bytes, so repeats of the same request still dedup against each other,
which is what the bit-identical-repeats invariant actually asks for. Do not "fix"
this by hashing pre-collapse — that would make two entries with different audio
layouts share one identity.
- **The collapse's minimal rebuild also drops `bext`/iXML/LIST — a source-position
consequence, not only a hashing one.** REAPER's renderer writes a `bext` time
reference, and REAPER's own import paths can position an item at that BWF timestamp,
so a collapsed capture loses it while a declined (non-collapsed) capture from the same
action keeps it — two captures from one action behave differently on re-import.
`shell/capture/insert.cpp` is unaffected (it drives `SetEditCurPos` + `InsertMedia`
rather than reading BWF), so this is not a defect in the shipped insert path.
Accepted, not verified against a DAW re-import: `[verify — DAW]`.
- `tail_control`'s `kDefaultManualTailMs`/`kManualStepMs` and
`render_settings`'s `kMaxTailMs`/`kAutoTrimThresholdDb` are separate constants
in separate files by design (panel-facing default/step vs. runaway-guard cap)
— don't conflate them when touching either.
src/core/capture/CMakeLists.txt
+33
View File
@@ -0,0 +1,33 @@
reasampler_pure_library(capture_paths SOURCES capture_paths.cpp)
reasampler_test(capture_paths LINK capture_paths)
reasampler_pure_library(capture_name SOURCES capture_name.cpp)
# capture_paths: the stem base's real contract is that sanitizeStem keeps it legal, so the
# name tests assert the composed stem THROUGH the sanitizer rather than in isolation.
reasampler_test(capture_name LINK capture_name capture_paths)
reasampler_pure_library(insert_plan SOURCES insert_plan.cpp)
reasampler_test(insert_plan LINK insert_plan)
reasampler_pure_library(render_settings SOURCES render_settings.cpp LINK PUBLIC bank_model)
reasampler_test(render_settings LINK render_settings)
reasampler_pure_library(render_window SOURCES render_window.cpp)
reasampler_test(render_window LINK render_window)
reasampler_pure_library(track_topology SOURCES track_topology.cpp)
reasampler_test(track_topology LINK track_topology)
reasampler_pure_library(batch_capture SOURCES batch_capture.cpp)
reasampler_test(batch_capture LINK batch_capture)
reasampler_pure_library(tail_control
SOURCES tail_control.cpp
LINK PUBLIC render_settings PRIVATE json)
reasampler_test(tail_control LINK tail_control)
reasampler_pure_library(capture_realtime SOURCES capture_realtime.cpp LINK PUBLIC bank_model)
reasampler_test(capture_realtime LINK capture_realtime)
reasampler_pure_library(wav_codec SOURCES wav_codec.cpp LINK PUBLIC peaks)
reasampler_test(wav_codec LINK wav_codec)
src/batch_capture.cpp → src/core/capture/batch_capture.cpp
+6 -8
View File
@@ -1,20 +1,18 @@
// batch_capture.cpp — pure logic for M11 batch capture. See header.
// NO REAPER types; unit-tested by tests/test_batch_capture.cpp.
// batch_capture.cpp — pure logic for batch capture. See header.
// Unit-tested by tests/test_batch_capture.cpp.
#include "batch_capture.h"
#include "core/capture/batch_capture.h"
#include <algorithm>
namespace reasampler {
namespace reasampler::capture {
std::vector<CaptureUnit> planCaptureUnits(const std::vector<BatchRange>& ranges) {
std::vector<CaptureUnit> units;
units.reserve(ranges.size());
int ordinal = 0;
for (const BatchRange& r : ranges) {
// Drop empty/inverted ranges — the offline backend refuses end<=start too, so
// planning one would only manufacture a guaranteed per-unit failure. Ordinals
// count kept units so the reported numbering is contiguous.
// Drop empty/inverted ranges — the offline backend refuses end<=start too.
if (!(r.endSeconds > r.startSeconds)) continue;
++ordinal;
units.push_back({ordinal, r.startSeconds, r.endSeconds});
@@ -73,4 +71,4 @@ std::string BatchOutcome::summaryLine(const std::string& noun) const {
return line;
}
} // namespace reasampler
} // namespace reasampler::capture
src/core/capture/batch_capture.h
+92
View File
@@ -0,0 +1,92 @@
#pragma once
// batch_capture — the REAPER-free logic behind batch capture (one action fires N
// captures: one bank sample per selected item / per razor area).
//
// PURE MODULE: NO REAPER types, NO SWELL, NO vendor/ includes. Standard library
// only. The batch shell reads the DAW state (selected items -> exact bounds;
// each track's P_RAZOREDITS -> areas) and hands the raw ranges here:
//
// 1. planCaptureUnits: an ordered list of (start,end) ranges -> an ordered
// list of CaptureUnit, each with a 1-based ordinal and validated bounds.
// Empty/inverted ranges are dropped (mirrors the offline backend's own
// end>start guard); ordinals count only the kept units, so three valid
// items yield 1,2,3 regardless of dropped neighbors.
// 2. BatchOutcome: order-preserving aggregation of per-unit results into a
// summary (succeeded/failed counts + ordered failures) for one console
// line with no partial-corruption ambiguity.
//
// Range is the only thing that varies per unit here. FX scope (item vs track) is
// a per-action constant the shell already owns; item-batch uses item scope,
// razor-batch uses track scope, passed through unchanged from the single-capture
// path.
#include <cstddef>
#include <string>
#include <vector>
namespace reasampler::capture {
// One capture in a batch: an exact source range plus its 1-based ordinal within
// the kept set. The ordinal disambiguates per-unit file stems (the offline
// backend's unique tag is 1-second-granular, so a fast batch could otherwise
// collide N files onto one name) and labels a failure in the summary.
struct CaptureUnit {
int ordinal = 0; // 1-based, counts kept units only
double startSeconds = 0.0; // exact — no rounding
double endSeconds = 0.0;
};
// A source range handed in by the shell (a selected item's [pos, pos+len] or one
// razor area's [start, end]). Named BatchRange (not SourceRange) to avoid
// collision with bank_model's SourceRange, which carries PPQ fields this planner
// doesn't need.
struct BatchRange {
double startSeconds = 0.0;
double endSeconds = 0.0;
};
// Validates + orders a batch's source ranges into capture units. Preserves input
// order; drops every range with end <= start; assigns 1-based ordinals over the
// kept units. An empty input yields an empty plan — the shell reports "nothing
// to batch" and writes nothing.
std::vector<CaptureUnit> planCaptureUnits(const std::vector<BatchRange>& ranges);
// The per-unit verdict the shell records after each render attempt, in unit order.
struct BatchUnitResult {
int ordinal = 0; // the CaptureUnit's ordinal this result is for
bool ok = false; // true iff the render + bank-add succeeded
std::string detail; // failure reason (empty on success) — for the summary
};
// Order-preserving aggregation of a batch's per-unit results. Built incrementally
// by the shell (record() after each unit) so a mid-batch failure doesn't abort
// the remaining units — each unit is independent.
class BatchOutcome {
public:
// Records one unit's verdict. Order of calls IS the reported order.
void record(int ordinal, bool ok, std::string detail = {});
std::size_t total() const { return results_.size(); }
std::size_t succeeded() const;
std::size_t failed() const;
const std::vector<BatchUnitResult>& results() const { return results_; }
// The ordered subset of results that failed (ok == false). For the summary line.
std::vector<BatchUnitResult> failures() const;
// A single human summary line for the console (explicit-action response — allowed
// by the console policy; a batch-completion summary with failure counts qualifies,
// per-unit success spam does not). `noun` is the unit word ("item" / "razor area").
// Examples:
// all-success, 3 items : "ReaSampler batch capture: 3 items captured."
// partial, 3 of 5 : "ReaSampler batch capture: 3 of 5 items captured "
// "(2 failed: #2, #4)."
// empty plan : "ReaSampler batch capture: nothing to capture."
std::string summaryLine(const std::string& noun) const;
private:
std::vector<BatchUnitResult> results_;
};
} // namespace reasampler::capture
src/core/capture/capture_name.cpp
+104
View File
@@ -0,0 +1,104 @@
// capture_name — pure implementation. See the header.
#include "core/capture/capture_name.h"
#include <cstdio>
namespace reasampler::capture {
namespace {
// A track name padded with spaces would render ragged in the label and as underscores in
// the stem, so both ends are trimmed before anything else looks at it.
std::string trimmed(const std::string& s) {
std::size_t b = 0;
std::size_t e = s.size();
auto isSpace = [](unsigned char c) {
return c == ' ' || c == '\t' || c == '\r' || c == '\n';
};
while (b < e && isSpace(static_cast<unsigned char>(s[b]))) ++b;
while (e > b && isSpace(static_cast<unsigned char>(s[e - 1]))) --e;
return s.substr(b, e - b);
}
// Truncating mid-sequence would put invalid UTF-8 into the persisted label, so the cut
// backs off over continuation bytes (10xxxxxx). The stem does not care — sanitizeStem
// replaces every non-ASCII byte anyway — but one rule for both keeps them the same name.
std::string truncateUtf8(const std::string& s, std::size_t maxBytes) {
if (s.size() <= maxBytes) return s;
std::size_t cut = maxBytes;
while (cut > 0 && (static_cast<unsigned char>(s[cut]) & 0xC0) == 0x80) --cut;
return s.substr(0, cut);
}
int clampTo(int v, int lo, int hi) { return v < lo ? lo : (v > hi ? hi : v); }
} // namespace
std::string formatCaptureStamp(const CaptureStamp& stamp) {
if (stamp.month < 1 || stamp.day < 1) return {};
char buf[24];
std::snprintf(buf, sizeof(buf), "%02d-%02d %02d%02d",
clampTo(stamp.month, 1, 12), clampTo(stamp.day, 1, 31),
clampTo(stamp.hour, 0, 23), clampTo(stamp.minute, 0, 59));
return buf;
}
CaptureName composeCaptureName(const CaptureNameInputs& in) {
std::string base;
int named = 0;
for (const std::string& raw : in.sourceNames) {
const std::string n = trimmed(raw);
if (n.empty()) continue;
if (base.empty()) base = n;
++named;
}
if (base.empty()) base = trimmed(in.fallback);
if (base.empty()) base = "capture";
base = truncateUtf8(base, kMaxSourceNameBytes);
// truncateUtf8 backs off over continuation bytes, so a name whose first kMaxSourceNameBytes
// bytes are ALL continuation bytes (0x80-0xBF) backs off to nothing — re-apply the "never an
// empty label" fallback after truncation, not just before it.
if (base.empty()) base = "capture";
CaptureName out;
out.label = base;
out.stemBase = base;
// Several sources collapse onto the first one's name plus a count of the rest — the
// alternative (joining every name) produces a stem no one can read and a label that
// no longer fits a card.
if (named > 1) {
const std::string extra = std::to_string(named - 1);
out.label += " +" + extra;
out.stemBase += "+" + extra;
}
if (in.ordinal > 0) {
const std::string ord = std::to_string(in.ordinal);
out.label += " #" + ord;
out.stemBase += "-" + ord;
}
const std::string stamp = formatCaptureStamp(in.stamp);
if (!stamp.empty()) out.label += " " + stamp;
return out;
}
std::string captureTrackName(const std::string& sourceName) {
const std::string prefix(kCaptureTrackPrefix);
// A source with no readable name yields the bare word rather than a trailing
// space; both spellings are fixed points, which is what makes the whole function
// one (a track named exactly "Capture" must not become "Capture Capture"). Read
// from kCaptureTrackPrefixBare rather than chopped off prefix, so the two names
// can't drift out of sync with each other (both expand from the same header token).
const std::string bare = kCaptureTrackPrefixBare;
if (sourceName.empty()) return bare;
if (sourceName == bare) return sourceName;
if (sourceName.rfind(prefix, 0) == 0) return sourceName;
return prefix + sourceName;
}
} // namespace reasampler::capture
src/core/capture/capture_name.h
+84
View File
@@ -0,0 +1,84 @@
#pragma once
// capture_name — the REAPER-free composition of one capture's label and file-stem base
// from its source-track name(s), a local-calendar discriminator, and an optional batch
// ordinal. The shell reads the names and the clock; the SHAPE of a capture's name is
// decided here so it is testable without a DAW.
#include <cstddef>
#include <string>
#include <vector>
namespace reasampler::capture {
// The capture's own moment, already broken down into LOCAL calendar fields by the shell.
// Passing fields rather than an epoch is what keeps the format deterministic under test:
// an epoch would render differently per machine timezone. month < 1 or day < 1 means
// "no stamp" and suppresses the discriminator entirely.
struct CaptureStamp {
int month = 0; // 1-12
int day = 0; // 1-31
int hour = 0; // 0-23
int minute = 0; // 0-59
};
// Longest source-name prefix kept in either the label or the stem. Real track names sit
// far under it; the bound exists so a pathological name cannot push the rendered file
// path toward the platform's limit, and so a label and its file still read as the same
// name.
inline constexpr std::size_t kMaxSourceNameBytes = 64;
struct CaptureNameInputs {
// Source-track names in source order — the first non-empty one names the capture,
// the rest only contribute the "+N" multi-source marker.
std::vector<std::string> sourceNames;
CaptureStamp stamp;
// Batch unit ordinal; <= 0 for a single capture.
int ordinal = 0;
// The scope literal ("item"/"track"/"realtime"), used ONLY when no source name
// resolved at all — otherwise the source name wins.
std::string fallback = "capture";
};
struct CaptureName {
// Sample::displayName. Legible, carries the source name verbatim, and is explicitly
// NOT unique (core/model/CLAUDE.md §resample_name) — the stamp serves the eye.
std::string label;
// deriveBankPaths' baseName. Still passes through sanitizeStem, and stem uniqueness
// is still entirely makeUniqueTag's job.
std::string stemBase;
};
// "MM-DD HHMM" (e.g. "08-01 1432"); empty when the stamp carries no calendar date.
// Year is deliberately omitted: the card and the browse list are narrow, and Sample
// carries the full createdTimestamp for anything needing the exact moment.
std::string formatCaptureStamp(const CaptureStamp& stamp);
CaptureName composeCaptureName(const CaptureNameInputs& in);
// The single source of truth for the word itself — kCaptureTrackPrefixBare and
// kCaptureTrackPrefix below both expand from this one token, so editing it can never
// desync captureTrackName's "no readable source name" bare-word fallback from the
// separator-terminated prefix it is derived from.
#define REASAMPLER_CAPTURE_TRACK_WORD "Capture"
// The bare word behind kCaptureTrackPrefix, needed by captureTrackName's
// no-readable-source-name fallback.
inline constexpr const char* kCaptureTrackPrefixBare = REASAMPLER_CAPTURE_TRACK_WORD;
// Prefixed onto a source track's name to name the track a render-in-place created.
// A display convention, not a persisted key — unlike a lane prefix or an action-id
// suffix, changing it later strands nothing.
inline constexpr const char* kCaptureTrackPrefix = REASAMPLER_CAPTURE_TRACK_WORD " ";
// The new track's name for a render of `sourceName`. IDEMPOTENT — a fixed point on
// its own output, so a second render over a result track yields "Capture MONEY"
// again rather than "Capture Capture MONEY". A counter suffix is deliberately not
// offered: REAPER does not uniquify track names either, and what distinguishes two
// renders of one source is their position, not their name.
std::string captureTrackName(const std::string& sourceName);
} // namespace reasampler::capture
src/core/capture/capture_paths.cpp
+142
View File
@@ -0,0 +1,142 @@
#include "core/capture/capture_paths.h"
#include <cassert>
#include <cctype>
#include <filesystem>
namespace reasampler::capture {
std::string normalizeSlashes(const std::string& path) {
std::string out = path;
for (char& c : out) {
if (c == '\\') c = '/';
}
// Strip a trailing slash but preserve a lone "/" (root).
if (out.size() > 1 && out.back() == '/') {
out.pop_back();
}
#ifdef _WIN32
for (char& c : out) c = static_cast<char>(std::tolower(static_cast<unsigned char>(c)));
#endif
return out;
}
std::string sanitizeStem(const std::string& baseName) {
std::string out;
out.reserve(baseName.size());
for (unsigned char c : baseName) {
const bool keep = (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z') ||
(c >= '0' && c <= '9') || c == '.' || c == '_' ||
c == '-';
out.push_back(keep ? static_cast<char>(c) : '_');
}
// Collapse to a stable default if nothing alnum survived.
bool hasAlnum = false;
for (unsigned char c : out) {
if ((c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z') ||
(c >= '0' && c <= '9')) {
hasAlnum = true;
break;
}
}
if (out.empty() || !hasAlnum) {
return "capture";
}
return out;
}
RenderPaths deriveRenderPaths(const std::string& absoluteDir,
const std::string& baseName,
const std::string& uniqueTag) {
std::string stem = sanitizeStem(baseName);
if (!uniqueTag.empty()) {
stem += "_" + sanitizeStem(uniqueTag);
}
RenderPaths r;
r.fileStem = stem; // stem only — REAPER appends the extension
r.fileName = stem + ".wav";
r.absoluteDir = normalizeSlashes(absoluteDir);
return r;
}
BankPaths deriveBankPaths(const std::string& projectDir,
const std::string& baseName,
const std::string& uniqueTag) {
const std::string dir = normalizeSlashes(projectDir);
// Precondition: caller must resolve a non-empty project directory — an
// empty one would otherwise fall back to a bare relative path (forbidden).
// Assert in debug; leave absoluteDir empty in release so a caller that
// ignores it fails at the render/stat step, not silently onto CWD.
assert(!dir.empty() && "deriveBankPaths: projectDir must not be empty");
const RenderPaths r = deriveRenderPaths(
dir.empty() ? std::string{} : dir + "/" + kBankSubfolder, baseName, uniqueTag);
BankPaths p;
p.fileStem = r.fileStem;
p.fileName = r.fileName;
p.relativePath = bankRelativeForName(r.fileName);
p.absoluteDir = r.absoluteDir;
return p;
}
std::string bankRelativeForName(const std::string& fileName) {
if (fileName.empty()) return {};
return std::string(kBankSubfolder) + "/" + fileName;
}
std::string resolveBankFile(const std::string& projectDir,
const std::string& relativePath) {
if (projectDir.empty() || relativePath.empty()) {
return {};
}
const std::string dir = normalizeSlashes(projectDir);
const std::string rel = normalizeSlashes(relativePath);
if (dir.empty() || rel.empty()) {
return {};
}
return dir + "/" + rel;
}
std::string projectDirOfRpp(const std::string& rppPath) {
if (rppPath.empty()) return {}; // unsaved project: keep empty, no fallback
std::string dir = std::filesystem::path(rppPath).parent_path().string();
return normalizeSlashes(dir);
}
BankRelocation deriveRelocationPlan(const std::string& oldProjectDir,
const std::string& newProjectDir) {
BankRelocation r;
if (oldProjectDir.empty() || newProjectDir.empty()) {
return r; // needed=false, empty dirs — nothing to relocate
}
const std::string oldDir = normalizeSlashes(oldProjectDir);
const std::string newDir = normalizeSlashes(newProjectDir);
r.oldBankDir = oldDir + "/" + kBankSubfolder;
r.newBankDir = newDir + "/" + kBankSubfolder;
r.needed = (oldDir != newDir); // Save-in-place leaves the dir unchanged
return r;
}
ProjectTransition classifyProjectTransition(bool sameProjectObject,
const std::string& lastGuid,
const std::string& lastPath,
const std::string& currentGuid,
const std::string& currentPath) {
// See capture_paths.h for the GUID-primary rationale and rule order.
if (currentGuid != lastGuid) {
return ProjectTransition::Load;
}
if (!sameProjectObject) {
return ProjectTransition::Load; // forked sibling: same GUID, different object
}
if (currentPath != lastPath) {
return ProjectTransition::SaveAsRelocate;
}
return ProjectTransition::NoOp;
}
} // namespace reasampler::capture
src/core/capture/capture_paths.h
+136
View File
@@ -0,0 +1,136 @@
#pragma once
// capture_paths — the REAPER-free path arithmetic behind offline capture. The
// capture shell resolves the current project directory via REAPER APIs, then
// hands the raw strings here. Forward-slash form throughout, no filesystem
// access; the bank subfolder name is a fixed constant.
#include <cstddef>
#include <cstdint>
#include <string>
#include <vector>
namespace reasampler::capture {
// The project-relative bank subfolder. All captured wavs live here so the bank
// travels with the .rpp.
inline constexpr const char* kBankSubfolder = "reasampler_bank";
// A resolved pair of paths for one capture: where REAPER must be told to write
// (absolute, because RENDER_FILE wants a directory REAPER can create/open) and
// what we store in the BankModel (project-relative, because the index is
// relative-paths-only — CLAUDE.md precision invariant).
struct BankPaths {
std::string absoluteDir; // <projectDir>/reasampler_bank (forward slash)
std::string relativePath; // reasampler_bank/<fileName> (index value)
std::string fileName; // <stem>.wav (full file name)
std::string fileStem; // <stem> (RENDER_PATTERN — REAPER appends the extension)
};
// Normalizes a path to forward slashes and strips any trailing slash (does not
// consult the filesystem). On Windows (_WIN32) also lowercases the result so
// paths differing only in casing compare equal; macOS/Linux preserve case.
std::string normalizeSlashes(const std::string& path);
// Sanitizes a caller-supplied base name into a filesystem-safe stem: keeps
// [A-Za-z0-9._-], replaces every other byte with '_', and collapses to
// "capture" if nothing usable remains. Deterministic.
std::string sanitizeStem(const std::string& baseName);
// Where one render writes, with no index spelling at all: the directory REAPER is
// told to render into plus the stem/file name it produces there. `absoluteDir` is
// taken as given (normalized only) rather than derived, because a render that never
// enters the bank has no bank subfolder to append — the render-in-place verb points
// this at the project's own recording path.
struct RenderPaths {
std::string absoluteDir; // RENDER_FILE (forward slash, no trailing slash)
std::string fileName; // <stem>.wav
std::string fileStem; // <stem> (RENDER_PATTERN — REAPER appends the extension)
};
// The file-stem spelling for one render: baseName is the sanitized file-stem source,
// uniqueTag an optional sanitized disambiguator (timestamp/counter) so repeated
// renders don't collide. Produces "<stem>[_<tag>].wav". THE one owner of that
// spelling — deriveBankPaths is expressed over it, and bankRelativeForName depends
// on the bank's spelling never drifting from it.
RenderPaths deriveRenderPaths(const std::string& absoluteDir,
const std::string& baseName,
const std::string& uniqueTag);
// Derives the bank paths for one capture: the same stem spelling as
// deriveRenderPaths, in the bank subfolder, plus the project-relative path the
// index stores.
BankPaths deriveBankPaths(const std::string& projectDir,
const std::string& baseName,
const std::string& uniqueTag);
// The project-relative index spelling for a bank file known only by its file
// name (bare entry, no directory) — the prune shell uses this to spell an
// enumerated folder entry the SAME way deriveBankPaths spelled it at capture
// time; a divergence here could make a referenced file look like an orphan.
std::string bankRelativeForName(const std::string& fileName);
// --- Persist-side path arithmetic -------------------------------------------
//
// The index stores relative paths only; on project load the persist shell
// turns each relativePath back into an absolute path against the current
// project directory — the inverse of deriveBankPaths.
// Returns "<projectDir>/<relativePath>" forward-slashed, or empty if either
// input is empty (no default-location fallback — an unsaved/unset project
// fails loudly rather than resolving against CWD).
std::string resolveBankFile(const std::string& projectDir,
const std::string& relativePath);
// The project directory that holds a .rpp: parent directory, forward-slashed,
// trailing slash stripped. Empty in -> empty out (an unsaved project reports
// an empty .rpp path). Pure so the VST3 instrument resolves audio paths the
// same way persist does.
std::string projectDirOfRpp(const std::string& rppPath);
// A relocation plan for the physical bank folder on Save-As to a new project
// location. The index's relative paths do NOT change (they are relative to the
// project dir, which moved with the .rpp), so relocation is purely a folder
// move. Both dirs are absolute, forward-slashed, trailing-slash-stripped.
struct BankRelocation {
std::string oldBankDir; // <oldProjectDir>/reasampler_bank
std::string newBankDir; // <newProjectDir>/reasampler_bank
bool needed = false; // false when old==new (Save in place, not Save-As)
};
// Derives the relocation plan: `needed` is true iff the normalized old/new
// project dirs differ (a genuine Save-As-to-new-dir); empty dirs/needed=false
// when either input is empty.
BankRelocation deriveRelocationPlan(const std::string& oldProjectDir,
const std::string& newProjectDir);
// --- Project-identity transition ---------------------------------------------
//
// What the persist timer must do on each tick. GUID is checked FIRST because
// two prior pointer-primary/GUID-only designs each broke a real case: a
// GUID-only check misreads a Save-As fork as the same project (fork and
// parent share a GUID on disk); a pointer-primary check misreads REAPER
// recycling a closed project's ReaProject* address onto an unrelated project
// (a different project, same recycled pointer, read as NoOp/SaveAsRelocate —
// the bank never reloads). Checking GUID first catches recycling; the pointer
// (sameProjectObject) then separates a forked sibling (Load) from a genuine
// Save-As (SaveAsRelocate).
enum class ProjectTransition {
NoOp, // same object, same GUID, same location — nothing to do
Load, // a different project is active — load ITS index from ext state
SaveAsRelocate, // SAME object + SAME GUID, new .rpp location — relocate the bank
};
// Classifies what a poll tick observed. sameProjectObject is passed as a bool
// (not the raw pointer) to keep the classifier REAPER-free and testable;
// lastGuid/lastPath is the project persist last acted on, currentGuid/
// currentPath the now-active project (both "" if unsaved/unwritten).
// Evaluated in order: currentGuid!=lastGuid -> Load; !sameProjectObject ->
// Load (forked sibling); currentPath!=lastPath -> SaveAsRelocate (also covers
// first save of an unsaved project); else NoOp.
ProjectTransition classifyProjectTransition(bool sameProjectObject,
const std::string& lastGuid,
const std::string& lastPath,
const std::string& currentGuid,
const std::string& currentPath);
} // namespace reasampler::capture
src/core/capture/capture_realtime.cpp
+103
View File
@@ -0,0 +1,103 @@
// capture_realtime.cpp — pure logic for the realtime-record backend. See header.
// Unit-tested by tests/test_capture_realtime.cpp.
#include "core/capture/capture_realtime.h"
namespace reasampler::capture {
RecordModePlan recordModePlanFor(int channelCount, OutputTap tap) {
RecordModePlan p;
// REAPER's output-record modes are mono/stereo only; >2 channels still
// records stereo-out (a >2-channel realtime capture is out of scope).
p.recMode = (channelCount <= 1) ? kRecModeMonoOutLatComp
: kRecModeStereoOutLatComp;
switch (tap) {
case OutputTap::PostFader: p.recModeFlags = kRecOutPostFader; break;
case OutputTap::PreFx: p.recModeFlags = kRecOutPreFx; break;
case OutputTap::PostFxPreFader: p.recModeFlags = kRecOutPostFxPreFader; break;
}
return p;
}
OutputTap outputTapForWetDry(double wetDry) {
return (wetDry >= 1.0) ? OutputTap::PostFader : OutputTap::PreFx;
}
Sample sampleFromRecordedCapture(const RecordedCapture& cap) {
Sample s;
// Relative path tail included so two same-tag captures (shouldn't happen) still differ.
s.id = "cap-" + cap.uniqueTag + "-" + cap.relativePath;
s.displayName = cap.displayName;
s.relativePath = cap.relativePath;
s.sourceMode = cap.sourceMode;
s.sourceRange.startSeconds = cap.startSeconds;
s.sourceRange.endSeconds = cap.endSeconds;
// PPQ/beats deferred (musical-placement concern), as offline.
s.wetDry = cap.wetDry;
s.trackGuids = cap.trackGuids;
s.channelCount = cap.channelCount;
s.sampleRate = cap.sampleRate; // 0 when project rate was unknown
s.lengthSeconds = cap.endSeconds - cap.startSeconds;
s.captureTempo = cap.captureTempo;
s.captureTimeSigNum = cap.captureTimeSigNum; // 0/0 = unstamped
s.captureTimeSigDenom = cap.captureTimeSigDenom;
s.tier = Tier::Scratch;
// contentHash is left empty: this mapping runs before the file exists on
// disk; the shell patches the hash in after the move+trim.
// rootNote/loop left empty: a realtime record of wet output isn't a single
// played note, so no root note is derivable; loop points are a later action.
s.createdTimestamp = cap.createdTimestamp;
return s;
}
RecordPhase advanceRecordPhase(RecordPhase current,
const RecordTickInputs& inputs,
double rangeStartSeconds,
double rangeEndSeconds) {
switch (current) {
case RecordPhase::Recording: {
// Stopped early (user or REAPER) -> finalize what was captured so far.
if (!inputs.transport.recording) return RecordPhase::Finalizing;
// >= (not >): a cursor landing exactly on the end completes.
if (inputs.transport.playPosition >= rangeEndSeconds)
return RecordPhase::Finalizing;
// Self-defense: a stuck/looping transport that never reaches end would
// otherwise stay in Recording forever, leaking the temp track + armed sink.
const double ceiling =
(rangeEndSeconds - rangeStartSeconds) + kRecordMarginSeconds;
if (inputs.elapsedSeconds > ceiling) return RecordPhase::Finalizing;
return RecordPhase::Recording;
}
case RecordPhase::Finalizing: {
// Moving the file before it's stable would race REAPER's flush and
// yield a truncated/missing capture.
if (inputs.fileReady) return RecordPhase::Done;
if (inputs.finalizingSeconds > kFinalizeFlushCeilingSeconds)
return RecordPhase::Failed;
return RecordPhase::Finalizing;
}
case RecordPhase::Done:
case RecordPhase::Failed:
default:
return current;
}
}
bool isStopRequested(RecordPhase phase) {
return phase != RecordPhase::Recording;
}
bool isTerminalPhase(RecordPhase phase) {
return phase == RecordPhase::Done || phase == RecordPhase::Failed;
}
} // namespace reasampler::capture
src/core/capture/capture_realtime.h
+171
View File
@@ -0,0 +1,171 @@
#pragma once
// capture_realtime — the REAPER-free logic behind the realtime-record backend.
// The shell drives the transport, temp track, send routing, and file move; the
// pure pieces split out here and unit-tested outside the DAW are: (1) record-
// mode bookkeeping — scope + FX-tap point -> I_RECMODE/I_RECMODE_FLAGS values
// (bit MEANINGS transcribed verbatim from reaper_plugin_functions.h ~2197-2198;
// the CHOICE of value per scope is this module's tested logic) — and (2) the
// recorded-file -> Sample mapping (mirrors OfflineRenderBackend's population).
#include <cstdint>
#include <string>
#include <vector>
#include "core/model/bank_model.h" // Sample, SourceMode (pure)
namespace reasampler::capture {
using model::Sample;
using model::Tier;
using model::SourceMode;
// I_RECMODE (verbatim from SDK header ~2197): 0=input, 1=stereo out, 2=none,
// 3=stereo out w/latency comp, 4=midi output, 5=mono out, 6=mono out w/latency
// comp, 7=midi overdub, 8=midi replace. We record a track's OUTPUT, latency-
// compensated, so the recorded file lines up sample-accurately with the source.
inline constexpr int kRecModeStereoOutLatComp = 3; // stereo out w/latency comp
inline constexpr int kRecModeMonoOutLatComp = 6; // mono out w/latency comp
// I_RECMODE_FLAGS (verbatim from SDK header ~2198): &3=output recording mode
// (0=post fader, 1=pre-fx, 2=post-fx/pre-fader). This is the only documented
// pre-FX tap in the SDK — offline render has no pre-FX bit — so the realtime
// backend is the true pre-FX "dry" path.
inline constexpr int kRecOutPostFader = 0; // &3==0: post-fader (fully wet)
inline constexpr int kRecOutPreFx = 1; // &3==1: pre-FX (true dry)
inline constexpr int kRecOutPostFxPreFader = 2; // &3==2: post-FX, pre-fader
// The tap point on the source track's output the temp track records from.
// Orthogonal to the record mode (stereo/mono); this only sets the &3 flags bits.
enum class OutputTap {
PostFader, // fully wet, after this track's fader (kRecOutPostFader)
PreFx, // true dry, before this track's FX (kRecOutPreFx)
PostFxPreFader, // wet FX, before the fader (kRecOutPostFxPreFader)
};
// The concrete record-mode values a temp track must carry to capture the scoped
// output. `recMode` sets I_RECMODE (stereo/mono, latency-compensated);
// `recModeFlags` sets the &3 output-recording tap bits (we only own those bits).
struct RecordModePlan {
int recMode = kRecModeStereoOutLatComp;
int recModeFlags = kRecOutPostFader;
};
// Maps (channelCount, tap) to the record-mode values: channelCount <= 1 ->
// mono-out latency-comp, else stereo-out; tap -> the &3 bits. The shell applies
// these via SetMediaTrackInfo_Value(I_RECMODE / I_RECMODE_FLAGS).
RecordModePlan recordModePlanFor(int channelCount, OutputTap tap);
// Maps a wetDry value to the output tap point: 1.0 (fully wet) -> PostFader,
// anything less -> PreFx (true dry — the realtime backend's distinguishing
// capability over offline render). PostFxPreFader is not reachable from wetDry.
OutputTap outputTapForWetDry(double wetDry);
// --- Recorded-file -> Sample mapping ----------------------------------------
// The inputs a finished realtime capture yields, gathered by the shell into a
// pure struct so Sample population is a single tested transform (mirrors the
// inline population in OfflineRenderBackend::capture).
struct RecordedCapture {
// Project-relative path of the recorded file (the shell resolves REAPER's
// absolute path back to project-relative).
std::string relativePath;
// The disambiguating tag that named the file (feeds the Sample id).
std::string uniqueTag;
// Echoed from the request (exact bounds — no re-measuring the file).
SourceMode sourceMode = SourceMode::Realtime;
double startSeconds = 0.0;
double endSeconds = 0.0;
double wetDry = 1.0;
std::string displayName;
std::vector<std::string> trackGuids;
int channelCount = 0;
// Left at defaults here — capture_realtime_finalize.cpp calls
// stampCaptureSample(result.sample, ...) afterward, overwriting these five
// from the live project. Kept because the pure unit tests still assert them.
int sampleRate = 0; // 0 when the project rate was unknown (as offline)
double captureTempo = 0.0; // BPM at capture time
int captureTimeSigNum = 0; // 0/0 = unstamped
int captureTimeSigDenom = 0;
std::int64_t createdTimestamp = 0; // unix epoch seconds
};
// Builds the Sample for a finished realtime capture: exact request bounds,
// scratch tier, empty content hash, lengthSeconds = end - start. PPQ/beats
// left 0 (deferred, as offline).
Sample sampleFromRecordedCapture(const RecordedCapture& cap);
// --- Async record-phase state machine ----------------------------------------
//
// A realtime record spans many timer ticks (CSurf_OnRecord starts the transport
// on REAPER's audio thread and returns immediately — it does not block until the
// range completes). The completion decision — keep waiting, stop-and-flush,
// finalize, or give up — is pure and unit-tested without a DAW; the shell only
// reads the transport/clock/file and applies the verdict.
//
// Two waits, not one:
// 1. RECORD wait (Recording): transport running; wait for the play cursor to
// reach the range end, OR the user stops early, OR a wall-clock safety
// ceiling trips (a started-but-never-advancing transport).
// 2. FLUSH wait (Finalizing): transport stopped but REAPER closes/flushes the
// recorded take on the audio thread — the file may lag a tick or two.
// Defer the move until the file exists AND is stable, bounded by a flush
// ceiling so a file that never appears fails cleanly instead of hanging.
// Where an in-progress capture is in its lifecycle: Recording (live, transport
// running) and Finalizing (live-but-stopped, waiting for flush) are the two
// waits above; Done/Failed are terminal — the shell's verdict to act on.
enum class RecordPhase {
Recording,
Finalizing,
Done,
Failed
};
// A distilled transport reading so the state machine never touches a REAPER
// type. `recording` is (GetPlayStateEx & 4) != 0; `playPosition` is
// GetPlayPositionEx (latency-compensated).
struct TransportReading {
bool recording = false;
double playPosition = 0.0;
};
// Everything the pure transition needs beyond the current phase, gathered by
// the shell each tick (the shell only reads and reports; never decides).
struct RecordTickInputs {
TransportReading transport;
double elapsedSeconds = 0.0; // wall-clock since begin() — record ceiling
double finalizingSeconds = 0.0; // wall-clock in Finalizing — flush ceiling
bool fileReady = false; // recorded file exists+stable (Finalizing only)
};
// Record ceiling margin added to nominal duration: generous enough that
// pre-roll/count-in/latency never trips it, tight enough a stuck transport is
// force-terminated within seconds.
inline constexpr double kRecordMarginSeconds = 5.0;
// Max wall-clock Finalizing waits for the file to flush/stabilize before
// giving up (REAPER closes the take within a tick or two in practice).
inline constexpr double kFinalizeFlushCeilingSeconds = 5.0;
// The pure transition (total + deterministic). Done/Failed are sticky — a late
// tick before teardown finishes cannot flip the verdict (the idempotence the
// shell's single-restore relies on).
RecordPhase advanceRecordPhase(RecordPhase current,
const RecordTickInputs& inputs,
double rangeStartSeconds,
double rangeEndSeconds);
// True once the shell must STOP the transport and begin the flush wait — i.e. the
// phase has left Recording (Finalizing/Done/Failed). Used by the shell to fire the
// (idempotent) transport stop exactly on the Recording -> Finalizing edge.
bool isStopRequested(RecordPhase phase);
// True for the phases the shell must ACT on to conclude (finalize-or-fail + restore).
// Only Done and Failed are terminal; Recording and Finalizing are live.
bool isTerminalPhase(RecordPhase phase);
} // namespace reasampler::capture
src/insert_plan.cpp → src/core/capture/insert_plan.cpp
+11 -14
View File
@@ -1,20 +1,20 @@
// insert_plan.cpp — see insert_plan.h. Pure InsertMedia mode-bit arithmetic.
#include "insert_plan.h"
#include "core/capture/insert_plan.h"
namespace reasampler {
namespace reasampler::capture {
namespace {
// Base target bits (mode&3). We use only 0 (current track) and 1 (new track).
constexpr int kBaseCurrentTrack = 0; // add to current track
constexpr int kBaseNewTrack = 1; // add new track
constexpr int kBaseCurrentTrack = 0;
constexpr int kBaseNewTrack = 1;
// Tempo-conform bits, verbatim from the header doc-comment.
constexpr int kMatchTempo1x = 8; // &8: try to match tempo 1x
constexpr int kMatchTempoHalf = 16; // &16: try to match tempo 0.5x
constexpr int kMatchTempoDbl = 32; // &32: try to match tempo 2x
constexpr int kDontPreservePitch = 64; // &64: don't preserve pitch when matching tempo
constexpr int kMatchTempo1x = 8;
constexpr int kMatchTempoHalf = 16;
constexpr int kMatchTempoDbl = 32;
constexpr int kDontPreservePitch = 64;
} // namespace
@@ -24,8 +24,7 @@ int computeInsertMode(const InsertOptions& opts) {
switch (opts.conform) {
case TempoConform::None:
// No tempo bits: native length, no stretch. (Also never &4.)
return mode;
return mode; // native length, no stretch; never &4
case TempoConform::Ratio1x:
mode |= kMatchTempo1x;
break;
@@ -37,13 +36,11 @@ int computeInsertMode(const InsertOptions& opts) {
break;
}
// Tempo bits are set (conform != None). Add the pitch-shift bit only when the
// caller asked NOT to preserve pitch. When conform == None we already returned
// above, so this can never fire without a tempo bit present.
// Reached only when a tempo bit is set (None already returned above).
if (!opts.preservePitch)
mode |= kDontPreservePitch;
return mode;
}
} // namespace reasampler
} // namespace reasampler::capture
src/insert_plan.h → src/core/capture/insert_plan.h
+17 -19
View File
@@ -1,34 +1,32 @@
#pragma once
// insert_plan — the REAPER-free logic behind the `insert` shell (M6): computing
// the InsertMedia `mode` bitmask from a small options struct.
// insert_plan — the REAPER-free logic behind the `insert` shell: computing the
// InsertMedia `mode` bitmask from a small options struct.
//
// PURE MODULE (CLAUDE.md §load-bearing split): NO REAPER types, NO SWELL, NO
// vendor/ includes. Standard library only. The one genuinely testable-outside-DAW
// piece of insert is the mode-bit arithmetic — the InsertMedia bitfield is easy to
// get wrong and its bits are load-bearing for the "no silent time-stretch"
// invariant, so it is factored here and unit-tested. The REAPER-bound placement
// (InsertMedia call, edit-cursor movement, undo block) lives in insert.cpp and is
// DAW-verified.
// PURE MODULE: NO REAPER types, NO SWELL, NO vendor/ includes. Standard library
// only. The InsertMedia bitfield is easy to get wrong and its bits are
// load-bearing for the "no silent time-stretch" invariant, so it's factored here
// and unit-tested. The REAPER-bound placement (InsertMedia call, edit-cursor
// movement, undo block) lives in insert.cpp and is DAW-verified.
//
// The bit meanings below are transcribed VERBATIM from the authoritative header
// Bit meanings below are transcribed VERBATIM from the authoritative header
// doc-comment (vendor/reaper-sdk/sdk/reaper_plugin_functions.h, InsertMedia):
// mode: 0=add to current track, 1=add new track, 3=add to selected items as
// takes, &4=stretch/loop to fit time sel, &8=try to match tempo 1x,
// &16=try to match tempo 0.5x, &32=try to match tempo 2x,
// &64=don't preserve pitch when matching tempo, ...
// We intentionally use only the base target (0/1) and the tempo-conform bits
// (&8/&16/&32/&64). We NEVER set &4 (stretch/loop to fit time selection) — that is
// the silent-time-stretch path the tool forbids (CONTEXT.md §Non-goals).
// We use only the base target (0/1) and the tempo-conform bits (&8/&16/&32/&64).
// We NEVER set &4 (stretch/loop to fit time selection) — the silent-time-stretch
// path the tool forbids.
#include <cstdint>
namespace reasampler {
namespace reasampler::capture {
// Where InsertMedia drops the item. Maps to the low bits of `mode` (mode&3).
// We expose only the two placement targets M6 needs; "add as takes" (3) is a
// later concern (YAGNI). Both insert AT THE EDIT CURSOR — that is REAPER's
// convention for base modes 0/1 (the header names no explicit edit-cursor bit;
// see the flagged runtime assumption in insert.cpp).
// We expose only the two placement targets needed here; "add as takes" (3) is
// out of scope. Both insert at the edit cursor — REAPER's convention for base
// modes 0/1 (the header names no explicit edit-cursor bit; see the flagged
// runtime assumption in insert.cpp).
enum class InsertTarget {
NewTrack, // mode base 1: add a new track for the item
CurrentTrack, // mode base 0: add to the current/selected track
@@ -72,4 +70,4 @@ int computeInsertMode(const InsertOptions& opts);
// any computed mode (the "no silent time-stretch" invariant, made checkable).
inline constexpr int kStretchToTimeSelBit = 4;
} // namespace reasampler
} // namespace reasampler::capture
src/core/capture/render_settings.cpp
+237
View File
@@ -0,0 +1,237 @@
// render_settings.cpp — pure logic for the three-scope capture action family. See header.
// NO REAPER types; unit-tested by tests/test_render_settings.cpp.
#include "core/capture/render_settings.h"
#include <algorithm>
#include <cmath>
#include <sstream>
namespace reasampler::capture {
double autoTrimEndRatio() {
// Amplitude ratio = 10^(dB/20) (header ~3062). For -72 dB this is ~0.00025119.
return std::pow(10.0, kAutoTrimThresholdDb / 20.0);
}
TailRenderSettings tailRenderSettingsFor(TailMode mode, double manualTailMs) {
TailRenderSettings t;
switch (mode) {
case TailMode::None:
// Exact bounds — byte-identical to the pre-tail capture.
t.tailFlag = kTailFlagNone;
t.tailMs = 0.0;
t.normalize = kNormalizeDisableAll;
t.trimEnd = 0.0;
return t;
case TailMode::Auto:
// Surgical normalize: only the trim-ending-silence bit set, every other
// postprocessing bit clear. A fixed-threshold trim scales/limits/fades
// nothing, so identical requests trim at the identical sample -> holds
// the bit-identical-repeats invariant.
t.tailFlag = kTailFlagTimeSelection;
t.tailMs = kMaxTailMs;
t.normalize = kNormalizeTrimEnd;
t.trimEnd = autoTrimEndRatio();
return t;
case TailMode::Manual:
// Clamped to the cap regardless of source; negative floors to 0.
t.tailFlag = kTailFlagTimeSelection;
t.tailMs = std::clamp(manualTailMs, 0.0, kMaxTailMs);
t.normalize = kNormalizeDisableAll;
t.trimEnd = 0.0;
return t;
}
// Unreachable for a valid enum; fail closed to exact bounds (never a stray tail).
return t;
}
double realtimeRecordWindowEnd(TailMode mode, double rangeEndSeconds,
double manualTailMs) {
switch (mode) {
case TailMode::None:
return rangeEndSeconds; // exact, no extra recording
case TailMode::Auto:
return rangeEndSeconds + kMaxTailSeconds; // runaway cap; decay-trim shortens later
case TailMode::Manual:
return rangeEndSeconds + std::clamp(manualTailMs, 0.0, kMaxTailMs) / 1000.0;
}
// Unreachable for a valid enum; fail closed to exact bounds (never a stray tail).
return rangeEndSeconds;
}
RenderSettingsChoice renderSettingsFor(SourceMode mode, double /*wetDry*/) {
// wetDry doesn't affect this mapping (seam for future dry work); FX scoping
// is handled by fxBypassPlanFor, not by these render bits.
RenderSettingsChoice c;
switch (mode) {
case SourceMode::MasterMix:
case SourceMode::TimeSelection:
c.settings = kRenderMasterMix; // wet-only, no source bits
c.supported = true;
return c;
case SourceMode::SelectedTracks:
c.settings = kRenderSelTracksViaMaster;
c.supported = true;
return c;
case SourceMode::SelectedItems:
// Single-file bit so a multi-item selection yields one bank entry.
c.settings = kRenderSelItems | kRenderSingleFile;
c.supported = true;
return c;
case SourceMode::RazorArea:
c.settings = kRenderRazorEdits | kRenderSingleFile;
c.supported = true;
return c;
case SourceMode::Realtime:
c.settings = kRenderMasterMix;
c.supported = false; // not an offline-render source
return c;
}
// Unreachable for a valid enum; fail closed (unsupported) rather than render.
c.supported = false;
return c;
}
void applySecondPassRenderSettings(const bool secondPass, RenderSettingsChoice& choice) {
if (secondPass) { choice.settings |= kSecondPassRender; }
}
const char* renderSourceLabel(SourceMode mode) {
switch (mode) {
// MasterMix and TimeSelection share this label because they ARE the same
// render — see the header.
case SourceMode::MasterMix:
case SourceMode::TimeSelection: return "master mix";
case SourceMode::SelectedTracks: return "selected tracks via master";
case SourceMode::SelectedItems: return "selected media items";
case SourceMode::RazorArea: return "razor edits";
case SourceMode::Realtime: return "realtime record";
}
return "unknown"; // unreachable for a valid enum; never claim a source
}
SourceMode sourceModeForScope(CaptureScope scope, bool itemExtentIsWindow) {
switch (scope) {
case CaptureScope::Item:
return itemExtentIsWindow ? SourceMode::SelectedItems
: SourceMode::SelectedTracks;
case CaptureScope::Track: return SourceMode::SelectedTracks;
}
// Unreachable for a valid enum; fail closed to the time-bounded render, which
// honors the requested bounds whatever the selection is.
return SourceMode::SelectedTracks;
}
bool isMultiTrackStemRender(SourceMode mode, int sourceTrackCount) {
return mode == SourceMode::SelectedTracks && sourceTrackCount > 1;
}
std::string multiTrackRefusalMessage(CaptureScope scope) {
// Deliberately does not name realtime capture as a way out, though it is the one
// action that sums correctly here: realtime is non-deterministic (hardware/performed
// FX, no bit-identical-repeats guarantee), so pointing an offline refusal at it would
// trade one invariant for another rather than just naming a substitute. A stated
// choice, not an oversight.
switch (scope) {
case CaptureScope::Item:
return "This range is narrower than the selected items, so it renders "
"through their tracks -- and those items span more than one track, "
"which this shape cannot land as a single file. Capture one track's "
"items at a time, or make the range match the items' extent.";
case CaptureScope::Track:
return "A track capture renders the selected tracks through the master, "
"and more than one track cannot land as a single file. Capture one "
"track at a time, or route them into a folder/bus track and capture "
"that (a folder's own output is its children summed).";
}
// Unreachable for a valid enum; a refusal with no way out is still better than a
// silent one, so fail closed to the scope-agnostic half of the message.
return "This selection spans more than one track, which cannot land as a single "
"file. Capture one track at a time.";
}
RangeSource inferRangeSource(bool hasRazorArea) {
// Razor wins when present; otherwise the time selection. Orthogonal to scope.
return hasRazorArea ? RangeSource::Razor : RangeSource::TimeSelection;
}
FxBypassPlan fxBypassPlanFor(CaptureScope scope) {
FxBypassPlan p;
switch (scope) {
case CaptureScope::Item:
// Take FX live in the item and are always rendered — bypass everything else.
p.bypassSelfFx = true;
p.bypassAncestorFx = true;
p.bypassMaster = true;
return p;
case CaptureScope::Track:
// Keep self FX; bypass every ancestor (parent/folder) and the master.
p.bypassSelfFx = false;
p.bypassAncestorFx = true;
p.bypassMaster = true;
return p;
}
return p; // unreachable; bypass nothing (fail to full-chain, never over-bypass)
}
std::vector<RazorRange> parseRazorEdits(const std::string& razorString) {
std::vector<RazorRange> ranges;
std::istringstream in(razorString);
std::string startTok, endTok, guidTok;
while (in >> startTok >> endTok >> guidTok) {
// Skip envelope-lane areas (real GUID); keep only track-audio (`""`).
if (guidTok != "\"\"") continue;
// std::stod throws on garbage — guard so one malformed triple doesn't
// abort the whole parse.
double start = 0.0, end = 0.0;
try {
std::size_t sp = 0, ep = 0;
start = std::stod(startTok, &sp);
end = std::stod(endTok, &ep);
// Reject trailing garbage (e.g. "1.0x") — a partial parse is malformed.
if (sp != startTok.size() || ep != endTok.size()) continue;
} catch (...) {
continue;
}
if (end > start) ranges.push_back({start, end}); // drop empty/inverted
}
return ranges;
}
RazorRange razorUnionBounds(const std::vector<RazorRange>& ranges) {
if (ranges.empty()) return {0.0, 0.0};
RazorRange u = ranges.front();
for (const RazorRange& r : ranges) {
if (r.startSeconds < u.startSeconds) u.startSeconds = r.startSeconds;
if (r.endSeconds > u.endSeconds) u.endSeconds = r.endSeconds;
}
return u;
}
const std::vector<CaptureActionDef>& captureActionTable() {
// FOREVER-STABLE ids — never edit a shipped string. No master capture
// action (its id was retired; do not reintroduce it).
static const std::vector<CaptureActionDef> table = {
{"CAPTURE_ITEM",
"capture selected item(s)", "item",
CaptureScope::Item},
{"CAPTURE_TRACK",
"capture selected track(s)", "track",
CaptureScope::Track},
};
return table;
}
} // namespace reasampler::capture
src/core/capture/render_settings.h
+250
View File
@@ -0,0 +1,250 @@
#pragma once
// render_settings — the REAPER-free logic behind the capture action family:
// sourceMode -> RENDER_SETTINGS bits, P_RAZOREDITS parsing + range union,
// razor-else-time inference, the FX-scope bypass plan, the capture-action
// table main.cpp iterates, and the multi-track-stem refusal + its user-facing
// message text. Bit MEANINGS below are transcribed verbatim from
// reaper_plugin_functions.h; the CHOICE of which bits each mode sets is tested.
#include <string>
#include <vector>
#include "core/model/bank_model.h" // SourceMode (pure enum)
namespace reasampler::capture {
using model::SourceMode;
// --- RENDER_SETTINGS source/processing bits (verbatim from SDK header ~3041) --
inline constexpr int kRenderMasterMix = 0; // (&(1|2))==0, no source bits
inline constexpr int kRenderSelItems = 32; // &32 selected media items
inline constexpr int kRenderSelItemsViaMaster = 64; // &64 selected media items via master
inline constexpr int kRenderSelTracksViaMaster = 128; // &128 selected tracks via master
inline constexpr int kSecondPassRender = 2048; // &2048 2nd Pass Render
inline constexpr int kRenderRazorEdits = 4096; // &4096 render razor edits
// kRenderPreFaderStems (&8192) is deliberately NOT used — REAPER offline render
// has no true pre-FX "dry" bit. FX scoping is done by the FX-bypass-around-render
// mechanism (see fxBypassPlan below), not by any render bit. All capture actions
// render wet; the scope decides which FX remain enabled.
inline constexpr int kRenderSingleFile = (4 << 16); // items/razor -> one file
// --- Render bounds mode -------------------------------------------------------
//
// A capture hands its window over on RENDER_BOUNDSFLAG=2 — the project's own TIME
// SELECTION (value verbatim, header ~3042), written through GetSet_LoopTimeRange.
//
// Custom time bounds (RENDER_BOUNDSFLAG=0, RENDER_STARTPOS/RENDER_ENDPOS, header
// ~3045-3046) must NOT be reintroduced: REAPER resolved a custom-bounds window on a
// whole-millisecond grid AT RENDER TIME, floored the end, wrote the floored value back
// over RENDER_ENDPOS, and rendered exactly the floored frame count — twice, to the
// frame. Re-rendering on this mode came back exact on both edges, including a start
// carrying a sub-millisecond remainder, which is what locates the floor in the
// custom-bounds field rather than downstream in the render engine. This is the one
// narrative home for that; other sites point here.
inline constexpr int kRenderBoundsTimeSelection = 2;
// --- Tail: RENDER_NORMALIZE / RENDER_TRIMEND bits + named constants ----------
//
// RENDER_NORMALIZE (verbatim, header ~3051): &32768 = trim ending silence (Auto
// path); &(4<<16) = disable all render postprocessing (None/Manual path).
inline constexpr int kNormalizeTrimEnd = 32768; // &32768 trim ending silence
inline constexpr int kNormalizeDisableAll = (4 << 16); // &(4<<16) = 262144, disable all
inline constexpr int kTailFlagNone = 0;
// RENDER_TAILFLAG's bits are keyed PER BOUNDS MODE (header ~3047): &4 is the
// time-selection mode's bit, the pair of kRenderBoundsTimeSelection above. A tail set
// under a different mode's bit renders no tail at all, so these two move together.
inline constexpr int kTailFlagTimeSelection = 4;
// Auto-trim trailing-silence threshold; single source of truth (RENDER_TRIMEND
// ratio derives from this dB, never the reverse). Daniel-set.
inline constexpr double kAutoTrimThresholdDb = -72.0;
// Runaway guard: max tail rendered past the range end, so a non-decaying or
// looping signal doesn't render forever. Daniel-set; shared by offline+realtime.
inline constexpr double kMaxTailSeconds = 8.0;
inline constexpr double kMaxTailMs = 8000.0;
// Derived linear amplitude ratio for RENDER_TRIMEND (header ~3062: an amplitude
// ratio, "0.5 means -6.02 dB", i.e. 10^(dB/20)) from kAutoTrimThresholdDb.
// Function not constant: std::pow isn't constexpr before C++26.
double autoTrimEndRatio();
// The three tail states — see src/core/capture/CLAUDE.md.
enum class TailMode {
None,
Auto,
Manual,
};
// The RENDER_* values a tail mode drives, in addition to the exact STARTPOS/ENDPOS
// the backend already sets. `trimEnd` is meaningful only when the trim-end
// normalize bit is set (Auto). The backend reads these straight onto
// GetSetProjectInfo.
struct TailRenderSettings {
int tailFlag = kTailFlagNone; // RENDER_TAILFLAG (0 or the bounds mode's bit)
double tailMs = 0.0; // RENDER_TAILMS
int normalize = kNormalizeDisableAll; // RENDER_NORMALIZE
double trimEnd = 0.0; // RENDER_TRIMEND (only used when trim bit set)
};
// Maps a tail mode (+ requested manual tail ms, used only for Manual) to its
// RENDER_* values. Manual is clamped to kMaxTailMs regardless of source.
TailRenderSettings tailRenderSettingsFor(TailMode mode, double manualTailMs);
// The realtime record-window end (project seconds): realtime does NOT drive
// RENDER_*, it records a generous window and trims later, so this is where the
// transport actually stops. None -> exact rangeEndSeconds; Auto -> +8s runaway
// cap; Manual -> + clamp(manualTailMs, kMaxTailMs)/1000.
double realtimeRecordWindowEnd(TailMode mode, double rangeEndSeconds,
double manualTailMs);
// The RENDER_SETTINGS value for a given source mode. `supported` is false only
// for SourceMode::Realtime (that backend doesn't use offline render).
struct RenderSettingsChoice {
int settings = kRenderMasterMix;
bool supported = true; // false => not an offline-render source (e.g. Realtime)
};
// Maps a source mode to its RENDER_SETTINGS value (which content the render
// covers); FX scoping is orthogonal (done by fxBypassPlan). `wetDry` is
// accepted but ignored — retained as the seam for future dry work. CONFIRMED
// (SDK header ~3041): MasterMix/TimeSelection -> 0; SelectedTracks -> &128;
// SelectedItems -> &32|single-file; RazorArea -> &4096|single-file.
RenderSettingsChoice renderSettingsFor(SourceMode mode, double wetDry);
// Apply the 2nd Pass Render setting to the RENDER_SETTINGS block
void applySecondPassRenderSettings(const bool secondPass, RenderSettingsChoice& choice);
// The render source a mode drives, in words. Exists for the offline backend's
// bounds refusal: the two ways a render can miss its window — a source that
// derives its own bounds (selected items, razor edits) versus a time-bounded
// render that came up short — are indistinguishable from a frame count alone,
// and naming the source is what tells them apart in a bug report.
//
// MasterMix and TimeSelection deliberately answer the SAME words: they map to the
// same RENDER_SETTINGS value and render identically, so naming them apart would
// assert a render distinction that does not exist.
const char* renderSourceLabel(SourceMode mode);
// --- Capture scope: the FX-scope invariant ------------------------------------
//
// See src/core/capture/CLAUDE.md for the scope contract. There is NO master
// scope; the master track's FX/gain/pan are still NEUTRALIZED as part of the
// out-of-scope chain (bypassMaster below) — master is a bypass target only.
enum class CaptureScope {
Item,
Track,
};
// The render source mode each scope drives. Track scope always captures its
// selected tracks (via master), time-bounded by RENDER_STARTPOS/ENDPOS.
//
// Item scope captures the selected items ONLY when `itemExtentIsWindow` — i.e.
// when those items' own extent already prints the requested window (see
// render_window::itemExtentPrintsWindow). REAPER's selected-items render source is
// INFERRED to derive its bounds from the item extents, so a window strictly inside
// (or wider than) a selected item cannot be expressed through it; that case renders
// time-bounded through the items' own tracks. The inference is unverified — see
// src/core/capture/CLAUDE.md §Gotchas for what it rests on.
//
// The FX SCOPE is unaffected by the swap (fxBypassPlanFor is keyed on CaptureScope,
// not on the source mode, so an item capture still hears take/item FX only), but the
// CONTENT reaching the render is not: the selected-tracks source prints everything
// upstream of the track — its folder children and its receives — which the shell
// transiently silences (shell/capture/render_isolation). An overlapping item on the
// track ITSELF is deliberately not isolated; see src/shell/capture/CLAUDE.md.
SourceMode sourceModeForScope(CaptureScope scope, bool itemExtentIsWindow);
// True for the one render shape that cannot land as a single capture: a selected-tracks
// render covering more than one track — a ranged item capture whose items span several
// tracks, or any multi-track track capture. That source is read as rendering one file
// per selected track — the single-file bit is documented for item/razor sources only
// (SDK header ~3041), which is the whole basis for the reading and is DAW-unverified.
// If it holds, N tracks collapse N stems onto one literal render pattern and whichever
// file survived would land as a successful capture carrying one track's audio. The
// caller refuses instead.
//
// Scope is deliberately NOT a parameter: the exposure comes from the render SOURCE,
// which both scopes reach.
bool isMultiTrackStemRender(SourceMode mode, int sourceTrackCount);
// The refusal text for the shape above. Keyed on scope because only the way OUT differs:
// an item capture can also widen its range to the items' own extent, which a track
// capture has no analog for. Kept beside the predicate so the two read as siblings.
std::string multiTrackRefusalMessage(CaptureScope scope);
// --- Range inference: razor-else-time (orthogonal to scope) -------------------
//
// Razor-present -> razor union; otherwise time selection. Razor is a range
// source, not a capture mode.
enum class RangeSource {
Razor, // a razor area is present -> use its union bound
TimeSelection, // no razor -> use the time selection
};
// Picks the range source. Pure so "razor wins when present" is tested without
// a DAW; the shell supplies whether any razor area was found.
RangeSource inferRangeSource(bool hasRazorArea);
// --- FX-bypass plan: which tracks' FX to bypass for a scope -------------------
//
// Given a CaptureScope, returns three boolean flags: bypass (a) the captured
// track's OWN FX, (b) every ancestor (parent/folder) track's FX, (c) the
// master FX. The caller (FxBypassGuard, shell) walks the ancestor chain via
// GetParentTrack, clears I_FXEN on each flagged track (RAII restore), and also
// neutralizes D_VOL/D_PAN/D_WIDTH/D_PANLAW/I_PANMODE to unity/center on the
// same set (I_PANMODE is load-bearing: in pan mode 6, D_PAN/D_WIDTH are
// ignored entirely, so forcing it is what makes the other neutralizations
// take effect) — I_FXEN alone doesn't touch a track's volume/pan. This plan
// selects the set; the guard applies both the FX bypass and the neutralize.
struct FxBypassPlan {
bool bypassSelfFx = false; // the captured track's own FX
bool bypassAncestorFx = false; // every ancestor (parent/folder) track's FX
bool bypassMaster = false; // the master track's FX
};
FxBypassPlan fxBypassPlanFor(CaptureScope scope);
// A single razor-edit area: a time range on one track (envelope GUID ignored —
// razor captures target track-audio areas, not envelope lanes).
struct RazorRange {
double startSeconds = 0.0;
double endSeconds = 0.0;
};
// Parses ONE track's P_RAZOREDITS string (SDK header ~2899): space-separated
// TRIPLES of <start> <end> <envGuidString>, envGuid == `""` for a track-audio
// area vs a GUID for an envelope-lane area. Returns only track-audio ranges
// (envelope-lane triples skipped); malformed trailing tokens are ignored, not
// fatal; a range with end <= start is dropped.
std::vector<RazorRange> parseRazorEdits(const std::string& razorString);
// The union bound (min start, max end) of a set of razor ranges — the exact
// window the offline render must cover. {0,0} for empty input ("no razor area").
RazorRange razorUnionBounds(const std::vector<RazorRange>& ranges);
// --- Capture-action taxonomy (the bindable set main.cpp registers) -----------
//
// One row per bindable scope action (item/track); range inference and tail
// mode are read at fire time, not baked into the row. The row stores only the
// channel-agnostic command-id SUFFIX + description PHRASE; the registering
// shell composes the full channel-qualified id/name via app_version.
//
// commandSuffix is FOREVER-STABLE (user keybindings key off the composed id).
struct CaptureActionDef {
const char* commandSuffix; // e.g. "CAPTURE_TRACK" — FOREVER-STABLE (composed w/ prefix)
const char* descriptionPhrase; // e.g. "capture selected track(s)" — Actions-list phrase
const char* baseName; // file-stem FALLBACK; the source track normally names the capture
CaptureScope scope; // FX scope (item / track)
};
// The capture-action table. Iterated by main.cpp to register the family and
// route each fired command back to its definition.
//
// Two rows: CAPTURE_ITEM / CAPTURE_TRACK. There is no master capture — to
// capture the master you render a track.
const std::vector<CaptureActionDef>& captureActionTable();
} // namespace reasampler::capture
src/core/capture/render_window.cpp
+61
View File
@@ -0,0 +1,61 @@
// render_window.cpp — see the header.
#include "core/capture/render_window.h"
#include <cmath>
namespace reasampler::capture {
namespace {
// Round-to-nearest: the convention THIS module measures a window by, so a mid-frame
// position maps to the closer frame boundary rather than always down. Not a claim
// about how any renderer resolves that position -- see the header's caveat.
long long frameIndexAt(double seconds, int sampleRate) {
return std::llround(seconds * static_cast<double>(sampleRate));
}
// See the header for why whole milliseconds get a tolerance and why it is this small.
double floorToMilliseconds(double seconds) {
const double ms = seconds * 1000.0;
if (isOnMillisecondGrid(seconds)) return std::nearbyint(ms) / 1000.0;
return std::floor(ms) / 1000.0;
}
} // namespace
long long frameCountFor(double startSeconds, double endSeconds, int sampleRate) {
if (sampleRate <= 0) return 0;
if (!(endSeconds > startSeconds)) return 0;
const long long frames =
frameIndexAt(endSeconds, sampleRate) - frameIndexAt(startSeconds, sampleRate);
return frames > 0 ? frames : 0;
}
bool renderHonoredBounds(long long expectedFrames, long long actualFrames) {
const long long delta = actualFrames > expectedFrames
? actualFrames - expectedFrames
: expectedFrames - actualFrames;
return delta <= 1;
}
bool itemExtentPrintsWindow(double reqStart, double reqEnd,
double itemStart, double itemEnd,
int sampleRate) {
if (sampleRate <= 0)
return reqStart == itemStart && reqEnd == itemEnd;
return frameIndexAt(reqStart, sampleRate) == frameIndexAt(itemStart, sampleRate)
&& frameIndexAt(reqEnd, sampleRate) == frameIndexAt(itemEnd, sampleRate);
}
bool isOnMillisecondGrid(double seconds) {
const double ms = seconds * 1000.0;
return std::fabs(ms - std::nearbyint(ms)) < 1e-6;
}
long long msFlooredEndFrameCount(double startSeconds, double endSeconds,
int sampleRate) {
return frameCountFor(startSeconds, floorToMilliseconds(endSeconds), sampleRate);
}
} // namespace reasampler::capture
src/core/capture/render_window.h
+75
View File
@@ -0,0 +1,75 @@
#pragma once
// render_window — pure frame arithmetic for a capture's requested window: the frame
// count a project-time range occupies, whether a render whose bounds come from the
// selected items' own extent already prints that window, and the one diagnostic a
// refused render quotes — whether its shortfall matches a millisecond-floor coincidence.
// NO REAPER types; unit-tested by tests/test_render_window.cpp.
namespace reasampler::capture {
// Frames the [startSeconds, endSeconds) window occupies at `sampleRate`. Both
// edges are resolved to the NEAREST frame boundary and subtracted, so the answer
// is a difference of frame indices rather than a rounded duration — two windows
// of equal length at different offsets can legitimately differ by one frame.
// Returns 0 for a non-positive rate or an empty/inverted window.
//
// The offline backend compares this against the rendered file's own frame count, so
// exact-bounds failures surface as a refused capture rather than a wrong file.
long long frameCountFor(double startSeconds, double endSeconds, int sampleRate);
// True when a landed render's frame count is consistent with `frameCountFor`'s
// answer for the same window. Tolerates a one-frame difference, and exactly one.
//
// That bound is EMPIRICAL. It is provable only for renderer models that derive the
// count from the window's LENGTH (floor/ceil/round of (end-start)*rate) or resolve
// both edges by the SAME convention; a renderer that resolves the start edge and the
// end edge by DIFFERENT conventions can legitimately sit TWO frames from this answer
// (tests/test_render_window.cpp pins both facts). Which model REAPER uses is
// unverified, so a refusal one or two frames wide may be this gate's fault rather than
// the render's. Widening past one frame retires the exact-bounds invariant rather than
// relaxing it, and is not a fix to reach for before that question is answered.
bool renderHonoredBounds(long long expectedFrames, long long actualFrames);
// True when a render bounded by the selected items' own extent
// [itemStart, itemEnd) already prints exactly the requested
// [reqStart, reqEnd) window — the one case where REAPER's selected-items render
// source is believed to need no correction (the bounds-override inference behind
// that is unverified; src/core/capture/CLAUDE.md §Gotchas states what it rests on).
// Compared at frame resolution, because a sub-frame difference prints the same
// frames. An unknown rate (<= 0) falls back to exact equality, which can only send
// a window to the time-bounded render, never widen one.
bool itemExtentPrintsWindow(double reqStart, double reqEnd,
double itemStart, double itemEnd,
int sampleRate);
// --- Diagnostics: where a short render lost its frames ------------------------
// The frames this window would hold if its END were resolved on a whole-millisecond
// grid, floored, instead of exactly. That is what REAPER's offline render did on the
// retired custom-time-bounds mode (render_settings.h's kRenderBoundsTimeSelection states
// the whole observation): two live short renders (48 kHz, TailMode::None) printed this
// count to the frame. Kept as the refusal's shape check — a refused render matching it
// says the floor is back, on a mode that was measured escaping it.
//
// Still a DESCRIPTION, never a request: nothing renders from this number and no capture
// path asks for it — a refusal quotes it to say the shortfall has the known shape, which
// is not the same as proving that this particular render took it. Whole-millisecond values
// are recognized within a nanosecond, because a decimal millisecond is not always one
// in binary (1.007 * 1000 lands just below 1007) and a bare floor would drop a
// millisecond from a window already on the grid. A nanosecond is far under one frame
// at any rate we render, so a real sub-millisecond remainder still floors.
//
// The tolerance is ours, not REAPER's: on a `1.007`-class grid point, a REAPER floor
// that does NOT carry the same epsilon would miss this shape entirely, and a real
// floored render would then read as an unmatched short render rather than the known one
// — silence here is not proof the floor didn't happen (docs/TODO.md records why this
// premise needs a DAW measurement before anything is built on it).
long long msFlooredEndFrameCount(double startSeconds, double endSeconds,
int sampleRate);
// True when `seconds` sits on a whole-millisecond boundary, under the nanosecond
// tolerance msFlooredEndFrameCount depends on and for the reason stated there. Public so
// that premise is testable directly rather than only through the count it feeds.
bool isOnMillisecondGrid(double seconds);
} // namespace reasampler::capture
src/core/capture/tail_control.cpp
+129
View File
@@ -0,0 +1,129 @@
// tail_control — pure implementation. See tail_control.h.
#include "core/capture/tail_control.h"
#include <algorithm>
#include <cstdio>
#include "core/json/json.h"
namespace reasampler::capture {
TailMode cycleTailMode(TailMode current) {
switch (current) {
case TailMode::None: return TailMode::Auto;
case TailMode::Auto: return TailMode::Manual;
case TailMode::Manual: return TailMode::None;
}
return TailMode::None; // unreachable for a valid enum; fail to the safe default
}
bool toggleSecondPass(bool current) {
return !current; // wow
}
double clampManualMs(double manualMs) {
return std::clamp(manualMs, 0.0, kMaxTailMs);
}
double adjustManualMs(double current, int notches, double stepMs) {
return clampManualMs(current + notches * stepMs);
}
std::string tailToggleLabel(const TailSetting& setting) {
switch (setting.mode) {
case TailMode::None: return "Tail: Off";
case TailMode::Auto: return "Tail: Auto";
case TailMode::Manual: {
// Clamped so the readout can't show an over-cap value even if
// manualMs was stored past the cap.
const double seconds = clampManualMs(setting.manualMs) / 1000.0;
char buf[32];
std::snprintf(buf, sizeof(buf), "Tail: Manual %.1fs", seconds);
return std::string(buf);
}
}
return "Tail: Off"; // unreachable for a valid enum; fail to the safe default
}
// --- JSON round-trip ---------------------------------------------------------
// manualMs round-trips exactly (json::numToStr uses the shortest %.17g-class
// form for doubles); deserialize returns nullopt on any parse failure.
namespace {
// The persisted integer for a mode. Stable forever (stored in the .rpp): never
// renumber these values or an already-saved project reads back the wrong mode.
int modeToInt(TailMode m) {
switch (m) {
case TailMode::None: return 0;
case TailMode::Auto: return 1;
case TailMode::Manual: return 2;
}
return 0;
}
std::optional<TailMode> modeFromInt(int v) {
switch (v) {
case 0: return TailMode::None;
case 1: return TailMode::Auto;
case 2: return TailMode::Manual;
default: return std::nullopt; // unknown enumerant -> malformed -> default
}
}
} // namespace
std::string serializeTailSetting(const TailSetting& setting) {
// Byte-identical to the former snprintf writer: {"mode":%d,"manualMs":%.17g}.
std::string out;
{
json::Writer w(out);
w.keyRaw("mode", json::numToStr(modeToInt(setting.mode)));
w.keyRaw("manualMs", json::numToStr(setting.manualMs));
w.keyRaw("secondPass", json::boolToStr(setting.secondPass));
} // Writer closes the object here (see bank_model's NRVO note)
return out;
}
std::optional<TailSetting> deserializeTailSetting(const std::string& blob) {
json::Reader r(blob);
if (!r.consume('{')) return std::nullopt;
int modeInt = 0;
double ms = 0.0;
bool secondPass = false;
bool haveMode = false, haveMs = false, haveSecondPass = false;
r.skipWs();
if (!r.consume('}')) {
do {
std::string key;
if (!r.parseKey(key)) return std::nullopt;
if (key == "mode") {
if (!r.parseInt(modeInt)) return std::nullopt;
haveMode = true;
} else if (key == "manualMs") {
if (!r.parseDouble(ms)) return std::nullopt;
haveMs = true;
} else if (key == "secondPass") {
if (!r.parseBool(secondPass)) return std::nullopt;
haveSecondPass = true;
} else {
if (!r.skipValue()) return std::nullopt; // forward-compat
}
} while (r.consume(','));
if (!r.consume('}')) return std::nullopt;
}
if (!haveMode || !haveMs || !haveSecondPass) return std::nullopt; // absent key -> malformed -> default
const std::optional<TailMode> mode = modeFromInt(modeInt);
if (!mode) return std::nullopt;
TailSetting out;
out.mode = *mode;
out.manualMs = ms;
out.secondPass = secondPass;
return out;
}
} // namespace reasampler::capture
src/core/capture/tail_control.h
+55
View File
@@ -0,0 +1,55 @@
#pragma once
// tail_control — the REAPER-free logic behind the docked bank_panel's tail-mode
// toggle. The panel shell owns the SWELL window, LICE drawing, and click
// hit-testing; the cycle order, manual-length clamp, and label text live here.
#include <optional>
#include <string>
#include "core/capture/render_settings.h" // TailMode (pure enum) — the three-state tail contract
namespace reasampler::capture {
// The Manual-mode starting length: 2s, a musically useful default (a bar of
// reverb throw at moderate tempo), well under the 8s cap. Also the fallback
// for a project with no stored tail setting.
inline constexpr double kDefaultManualTailMs = 2000.0;
// Fine-adjust step per scroll-wheel notch in Manual mode. Daniel-set.
inline constexpr double kManualStepMs = 250.0;
// The panel's current tail setting: mode + the length used only when Manual.
// Default None so a capture with no explicit choice stays exact-bounds.
// `manualMs` is clamped to kMaxTailMs before it ever reaches a CaptureRequest.
// 2nd-Pass Render optional, off by default
struct TailSetting {
TailMode mode = TailMode::None;
double manualMs = kDefaultManualTailMs;
bool secondPass = false;
};
// Cycles the tail mode: None -> Auto -> Manual -> None.
TailMode cycleTailMode(TailMode current);
// Toggles the 2nd-Pass Render
bool toggleSecondPass(bool current);
// The effective manual length a Manual capture uses: clamped to [0, kMaxTailMs].
// Exposed so the panel can show the clamped value. Meaningful only for Manual.
double clampManualMs(double manualMs);
// Applies `notches` scroll-wheel steps of `stepMs` each to `current`, clamped
// to [0, kMaxTailMs]. Meaningful only for TailMode::Manual.
double adjustManualMs(double current, int notches, double stepMs);
// The toggle's label, e.g. "Tail: Off", "Tail: Auto", or (Manual, clamped
// length to one decimal) "Tail: Manual 2.0s".
std::string tailToggleLabel(const TailSetting& setting);
// JSON round-trip of a TailSetting, for persist to store per-project. Pure/
// testable here, mirroring bank_model's serialize/deserialize; deserialize
// returns nullopt on malformed input so the caller falls back to a default.
std::string serializeTailSetting(const TailSetting& setting);
std::optional<TailSetting> deserializeTailSetting(const std::string& json);
} // namespace reasampler::capture
src/core/capture/track_topology.cpp
+62
View File
@@ -0,0 +1,62 @@
// track_topology.cpp — see the header.
#include "core/capture/track_topology.h"
#include <cstddef>
namespace reasampler::capture {
std::vector<int> directChildIndices(const std::vector<int>& folderDepths,
int parentIndex) {
std::vector<int> children;
const int count = static_cast<int>(folderDepths.size());
if (parentIndex < 0 || parentIndex >= count) return children;
if (folderDepths[static_cast<std::size_t>(parentIndex)] != 1) return children;
// Depth relative to the parent: 1 immediately after it (inside its folder), and
// 0 once the folder closes. Only tracks sitting at relative depth 1 are direct
// children; a child that opens its own folder pushes the level to 2, which is
// what excludes its descendants.
int level = 1;
for (int i = parentIndex + 1; i < count && level > 0; ++i) {
if (level == 1) children.push_back(i);
level += folderDepths[static_cast<std::size_t>(i)];
}
return children;
}
SiblingPlacement siblingPlacement(const std::vector<int>& folderDepths, int srcIndex) {
const int count = static_cast<int>(folderDepths.size());
if (count == 0) return SiblingPlacement{};
const int src = srcIndex < 0 ? 0 : (srcIndex >= count ? count - 1 : srcIndex);
// levels[i] is track i's absolute nesting depth; levels[count] is the depth the
// list closes at (0 in a well-formed project). Negative is unrepresentable, so a
// malformed over-closing delta clamps here rather than propagating.
std::vector<int> levels(static_cast<std::size_t>(count) + 1, 0);
for (int i = 0; i < count; ++i) {
const int next = levels[static_cast<std::size_t>(i)] +
folderDepths[static_cast<std::size_t>(i)];
levels[static_cast<std::size_t>(i) + 1] = next < 0 ? 0 : next;
}
const int L = levels[static_cast<std::size_t>(src)];
int p = src + 1;
if (folderDepths[static_cast<std::size_t>(src)] >= 1) {
p = count; // an unterminated folder swallows the rest of the list
for (int j = src + 1; j <= count; ++j) {
if (levels[static_cast<std::size_t>(j)] == L) { p = j; break; }
}
}
SiblingPlacement out;
out.insertIndex = p;
out.precedingIndex = p - 1;
out.precedingDepth = L - levels[static_cast<std::size_t>(p - 1)];
out.newDepth = levels[static_cast<std::size_t>(p)] - L;
return out;
}
} // namespace reasampler::capture
src/core/capture/track_topology.h
+56
View File
@@ -0,0 +1,56 @@
#pragma once
// track_topology — pure folder arithmetic over a project's track list: which tracks
// are the DIRECT children of a folder parent, and where a new SIBLING of a given
// track goes, both derived from the I_FOLDERDEPTH deltas alone. NO REAPER types
// (the shell reads the deltas); unit-tested by tests/test_track_topology.cpp.
#include <vector>
namespace reasampler::capture {
// Indices of `parentIndex`'s DIRECT children, given every track's I_FOLDERDEPTH in
// track order. I_FOLDERDEPTH is a DELTA applied AFTER its own track (SDK header
// ~2215: 0 = normal, 1 = opens a folder, -n = closes n folders), so the depth walk
// below is the only way to recover the tree from the flat list.
//
// Empty when `parentIndex` is out of range or its track does not open a folder.
// Grandchildren are deliberately excluded: their audio reaches the parent only
// through the direct child that owns them, so a caller silencing each direct child's
// send-to-parent silences the whole subtree. An unterminated folder (no closing
// negative delta) treats every remaining track as inside it, matching REAPER.
std::vector<int> directChildIndices(const std::vector<int>& folderDepths,
int parentIndex);
// Where a new track goes so it is a SIBLING of `srcIndex` — same nesting level, same
// folder — and the two I_FOLDERDEPTH writes that put it there.
struct SiblingPlacement {
int insertIndex = 0; // the index the new track occupies after insertion
// The track that will PRECEDE the new one (insertIndex - 1), and its rewritten
// delta. -1 only for a degenerate empty list, where there is nothing to write.
int precedingIndex = -1;
int precedingDepth = 0;
int newDepth = 0; // the new track's own I_FOLDERDEPTH
};
// Both naive answers are audibly wrong, which is why this is arithmetic and not
// `srcIndex + 1`: inserting straight after a folder PARENT makes the new track that
// folder's first child (its audio re-enters the parent's FX and fader), and inserting
// straight after the folder's LAST track steals that track's closing delta and drops
// the new one outside the folder entirely (its audio bypasses the folder bus).
//
// Levels are absolute nesting depths recovered from the deltas (level[0] = 0,
// level[i+1] = level[i] + depth[i]). A folder parent's insert point is the first
// following track back at the source's own level — i.e. after the whole folder;
// everything else inserts directly below the source. On a well-formed delta list
// (one whose deltas sum to zero) the two writes preserve the total delta sum, so no
// track after the insertion changes level — the malformed case below does not carry
// that guarantee; the clamp keeps the result legal, not level-preserving.
//
// A malformed list (deltas not summing to zero, an out-of-range srcIndex) CLAMPS to
// the nearest legal placement rather than asserting: the failure mode of a corrupt
// project must be a track at the wrong nesting level, never a crash.
SiblingPlacement siblingPlacement(const std::vector<int>& folderDepths, int srcIndex);
} // namespace reasampler::capture

Some files were not shown because too many files have changed in this diff Show More